All products · 28 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Arduino UNO
Hardware development board (SMD/DIP). ATmega328P, 14 digital I/O, 6 analog, USB-B.
Quarky
Educational STEM controller board. USB programmable. Block coding + Python/Arduino-like. Built-in sensors (mic, light, IMU) + ports for external sensors/servos. 5V input (USB/power bank). BLE/Wi-Fi optional depending on version.
Arduino Nano
Compact development board. ATmega328P, mini-USB. Breadboard friendly.
Arduino Mega
Development board. ATmega2560, 54 digital I/O, 16 analog, perfect for big projects.
ESP32-C3 Super Mini Development Board With Headers Pins
[ESP Modules] Ultra Compact • Wi-Fi & BLE 5.0 • USB Type-C • Perfect for IoT & Embedded Projects The ESP32-C3 Super Mini Development Board is a compact, feature-rich development board built around the powerful ESP32-C3 SoC from Espressif. Powered by a 32-bit RISC-V single-core processor running at up to 160MHz, it combines 2.4GHz Wi-Fi, Bluetooth 5.0 Low Energy (BLE), and low-power operation in an ultra-small form factor. Designed for IoT, smart home, wireless communication, automation, and embedded system development, the ESP32-C3 Super Mini offers 4MB Flash memory, 400KB SRAM, multiple GPIOs, ADC, PWM, UART, SPI, and I2C interfaces for connecting sensors, displays, relays, and other peripherals. The onboard USB Type-C interface simplifies programming and power supply, while the built-in USB-to-Serial functionality enables quick firmware uploading without requiring additional programmers. Fully compatible with Arduino IDE, ESP-IDF, PlatformIO, and MicroPython, it is suitable for beginners, students, makers, and professional developers. Its ultra-compact breadboard-friendly design makes it ideal for portable and space-constrained projects where performance, wireless connectivity, and energy efficiency are essential. Note: Programming, software configuration, driver installation, firmware flashing, and coding-related issues are not covered under return or replacement. Users are expected to troubleshoot software-related issues independently. ⭐ Features Powerful ESP32-C3 32-bit RISC-V processor CPU frequency up to 160MHz Built-in 2.4GHz Wi-Fi (802.11 b/g/n) Integrated Bluetooth 5.0 Low Energy (BLE) Ultra-compact Super Mini design Breadboard-friendly layout USB Type-C interface for programming and power 4MB onboard Flash memory 400KB SRAM Multiple GPIO, ADC, PWM, UART, SPI & I2C interfaces Low power consumption with Deep Sleep mode Onboard programmable LED Compatible with Arduino IDE, ESP-IDF, PlatformIO & MicroPython Ideal for IoT, automation, robotics, and wireless applications 📋 Technical Specifications Product Type: Development Board Board Model: ESP32-C3 Super Mini Microcontroller: ESP32-C3 Processor Architecture: 32-bit RISC-V CPU Frequency: Up to 160MHz Core: Single Core Flash Memory: 4MB SRAM: 400KB Wi-Fi Standard: IEEE 802.11 b/g/n (2.4GHz) Bluetooth: Bluetooth 5.0 Low Energy (BLE) Operating Voltage: 3.3V Input Voltage: 5V via USB Type-C or 3.3V External USB Interface: USB Type-C GPIO: Multiple Digital GPIO Pins Analog Input: Up to 6 ADC Channels PWM: Supported UART: Supported SPI: Supported I2C: Supported USB-to-Serial: Onboard Onboard LED: User Programmable (GPIO8) Power Consumption: Ultra Low (Deep Sleep ≈ 43µA) Dimensions: Approx. 22.5 × 18 mm Headers: Pre-Soldered 🔧 Applications Suitable for: Internet of Things (IoT) Smart Home Automation Wireless Sensor Networks Home Automation Systems Bluetooth Low Energy Devices Wi-Fi Enabled Controllers Robotics Projects Data Logging Systems Remote Monitoring Industrial Automation Portable Embedded Devices Educational Learning DIY Electronics Projects Wearable Electronics Rapid Prototyping 📦 Package Includes 1 × ESP32-C3 Super Mini Development Board Pin Headers ⚠️ Note Programming, firmware installation, software configuration, and driver-related issues are not covered under warranty, return, or replacement. Please verify board compatibility and install the appropriate development environment before programming. Soldered and non-soldered header pin depend on stock
ESP32 Development Board with WiFi & Bluetooth – CH340C USB Type-C
[ESP Modules] The ESP32 Development Board with WiFi & Bluetooth (CH340C, Type-C) is a powerful and versatile microcontroller board designed for modern wireless and IoT applications. It features a dual-core processor and integrated 2.4GHz WiFi and Bluetooth (Classic + BLE) connectivity. This board includes an onboard CH340C USB-to-Serial converter, which allows easy programming and communication without requiring an external crystal oscillator. The USB Type-C port provides a stable and reversible connection for power and data. With a wide range of GPIO pins and peripherals such as ADC, DAC, PWM, UART, SPI, and I2C, this board is perfect for building home automation systems, smart devices, IoT nodes, robotics controllers, sensor networks, web servers, and wireless projects. It is fully compatible with Arduino IDE, ESP-IDF, and MicroPython, making it suitable for beginners, students, and professional developers. 🔹 Key Features Based on ESP32 dual-core microcontroller Built-in WiFi 802.11 b/g/n and Bluetooth v4.2 (Classic + BLE) Onboard CH340C USB-to-Serial converter (no external crystal required) Modern USB Type-C connector for power and programming Dual-core CPU up to 240 MHz for high-performance applications Multiple GPIO pins with ADC, DAC, PWM support Supports Arduino IDE, ESP-IDF, and MicroPython Low-power modes including deep sleep for battery-powered projects Compact design with breadboard-friendly layout Ideal for IoT, automation, robotics, smart home, and DIY electronics 🔹 Technical Specifications Microcontroller: ESP32 CPU: Dual-core Tensilica LX6, up to 240 MHz Flash Memory: 4 MB (typical, may vary by batch) SRAM: 520 KB Wireless Connectivity: WiFi: 2.4 GHz, 802.11 b/g/n Bluetooth: v4.2, Classic + BLE USB Interface: USB Type-C USB-to-Serial Chip: CH340C Operating Voltage: 3.3 V Input Voltage: 5 V via USB Logic Level: 3.3 V GPIO Pins: 30+ multifunction pins Peripherals: ADC, DAC, PWM, UART, SPI, I2C, I2S Clock Frequency: Up to 240 MHz Programming Support: Arduino IDE, ESP-IDF, MicroPython Onboard Components: Reset & Boot buttons, voltage regulator, status LEDs Form Factor: Standard ESP32 Dev Board size 🔹 Applications Internet of Things (IoT) projects Home and industrial automation Smart home devices Robotics and motor control Wireless sensor networks Web servers and cloud-connected devices Educational and training projects DIY electronics and prototyping 🔹 Package Contents 1 × ESP32 Development Board with WiFi & Bluetooth (CH340C, USB Type-C)
ESP32 38-Pin Development Board – IoT Microcontroller with WiFi & Bluetooth
[ESP Modules] Description The ESP32 38-Pin Development Board is a versatile and cost-effective microcontroller platform perfect for a wide range of IoT, automation, and wireless communication projects. Powered by the ESP32 SoC, this board offers integrated WiFi and Bluetooth (BLE) capabilities, making it ideal for developing smart home devices, industrial control systems, robotics, and DIY electronics. For the best IoT experience, you can pair this board with our LoRa SX1278 Module for long-range communication or integrate it with our 0.96-inch OLED Display for real-time data display. Need reliable power control? Combine it with our 2-Channel Relay Module with Optocoupler for safe switching of external devices. Compatible with popular platforms like Arduino IDE, MicroPython, and PlatformIO, this ESP32 board is user-friendly for both beginners and professionals. The board features 38 GPIO pins, enabling you to connect a variety of sensors, actuators, and other peripherals—available in our IoT Components category. Key Features: ESP32 Dual-Core 32-bit LX6 Processor Built-in 2.4 GHz WiFi and Bluetooth 4.2 (BLE) 38 GPIO Pins supporting multiple digital and analog functions Interfaces: UART, SPI, I2C, PWM, ADC, DAC Ultra-low power operation modes ideal for battery-powered IoT devices Supports Arduino IDE, MicroPython, and other environments Onboard micro-USB connector for easy power and programming Reset and boot buttons for firmware flashing Breadboard-friendly form factor Applications: IoT development projects Smart home automation – compatible with Vihaan IoT Gateway Solutions Wireless data logging systems Robotics and drone controllers Industrial monitoring devices Sensor networks – connect with our DHT11/DHT22 Temperature Sensors Specifications: Chipset: ESP32 (Generic) Operating Voltage: 3.3V (5V tolerant inputs) Flash Memory: 4MB Connectivity: WiFi IEEE 802.11 b/g/n, Bluetooth 4.2 BLE Interfaces: GPIO, UART, SPI, I2C, ADC, DAC, PWM USB Interface: Micro USB Form Factor: 38-Pin, breadboard compatible Package Includes: 1 x ESP32 38-Pin Generic Development Board
Arduino Uno R3 CH340G ATMega328P Development Board Compatible with Arduino
[Arduino Boards, Development Board] Product Description The Uno R3 CH340G ATmega328p Development Board is the low-cost version of the popular Uno R3 Arduino. It is assembled with the CH340 USB to Serial converter chip, instead of using an Atmega16U2 chip. We have used plenty of these low-cost Arduino boards with CH340 chips, and have found them to work perfectly. The only time the CH340 chip is used is during programming and when using the serial output of the USB port. During normal operation, this board is identical to the more expensive version without CH340 chip. Features The Arduino Uno R3 is a micro-controller board base on the ATmega328 . It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get start. The Arduino Uno R3 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) program as a USB-to-serial converter. Revision 2 of the Uno board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode. Note: The Arduino Uno R3 reference design can use an Atmega8, 168, or 328, Current models use an ATmega328, but an Atmega8 is shown in the schematic for reference. The pin configuration is identical on all three processors. Package Includes 1 x Arduino Uno R3 CH340G ATMega328P Development Board
Core Board STM8S103F3P6 STM8 Development Board Minimum System Board
[Development Board] Connection Diagram: Features : Chipboard STM32F103C8T6 On board, SWIM interface and reset button Micro USB line or the 2.54 pin to link to the power with the input voltage 4.5V-15V. Power light and the Demo indicator light Leads all the pins and has detailed label for the Pins. Support SWIM debug mode. Package Includes : 1 x Core Board STM8S103F3P6 STM8 Development Board
ESP8266 NodeMCU CP2102 ESP-12E WiFi Development Board
[ESP Modules] ESP8266 NodeMCU CP2102 ESP-12E WiFi Development Board ESP8266 ESP-12E • CP2102 USB Interface • Built-in WiFi • Arduino & Lua Compatible • IoT Development Board The ESP8266 NodeMCU CP2102 ESP-12E WiFi Development Board is a compact and powerful development board designed for IoT (Internet of Things), wireless communication, home automation, robotics, and embedded system projects. Based on the highly popular ESP8266 ESP-12E WiFi module, it combines a 32-bit microcontroller, WiFi connectivity, and a CP2102 USB-to-Serial interface on a single breadboard-friendly board. The board comes preloaded with NodeMCU firmware, allowing easy programming using Lua scripting, while also offering full compatibility with the Arduino IDE, making it suitable for both beginners and advanced developers. With integrated 802.11 b/g/n WiFi, TCP/IP networking, multiple GPIO pins, PWM, I2C, SPI, and UART interfaces, it provides everything required for rapid IoT prototyping and wireless application development. The onboard CP2102 USB interface, 3.3V voltage regulator, and logic-level conversion circuitry allow direct connection to a computer for programming and power, eliminating the need for external USB-to-Serial converters. ⭐ Features ESP8266 ESP-12E WiFi module Built-in CP2102 USB-to-Serial interface 802.11 b/g/n WiFi connectivity Integrated TCP/IP protocol stack 32-bit processor with onboard memory Compatible with Arduino IDE, Lua, and NodeMCU firmware Breadboard-friendly compact design Multiple GPIO pins Supports PWM, I2C, SPI, and UART Onboard 3.3V voltage regulator Logic-level conversion circuitry included Low power consumption Ideal for IoT and wireless projects Easy plug-and-play programming 📋 Technical Specifications Product Type: WiFi Development Board Model: ESP8266 NodeMCU ESP-12E Microcontroller: ESP8266EX WiFi Standard: IEEE 802.11 b/g/n USB Interface: CP2102 Operating Voltage: 3.3V Input Voltage: 5V via Micro USB Flash Memory: 4MB CPU: 32-bit Tensilica L106 Clock Frequency: 80MHz / 160MHz GPIO Pins: Multiple Digital I/O Communication Interfaces: UART, SPI, I2C PWM Support: Yes ADC: 1 Channel (10-bit) USB Connector: Micro USB Firmware: NodeMCU (Preloaded) Programming Support: Arduino IDE, Lua, ESP8266 SDK Board Size: Approx. 58 × 31 mm 🔧 Applications IoT (Internet of Things) Projects Home Automation Smart Lighting Systems WiFi Sensor Nodes Wireless Data Logging Robotics Projects Arduino WiFi Projects ESP8266 Development Remote Monitoring Systems MQTT Applications Web Server Projects Smart Agriculture Industrial Automation DIY Electronics Educational Projects 📦 Package Includes 1 × ESP8266 NodeMCU CP2102 ESP-12E WiFi Development Board ⚠️ Note Operates at 3.3V logic levels. Install the CP2102 USB driver if the board is not detected by your computer. Use a good quality Micro USB cable for programming and power. Product appearance may vary slightly depending on the manufacturing batch.
Unsoldered Nano V3.0 ATmega328P 5V 16MHz CH340 Type-C
[Arduino Boards] This Arduino-compatible Nano V3.0 micro-controller is a small, complete, micro-controller board based on the ATmega328 MCU. It has more or less the same functionality as the Arduino Duemilanove, but in a smaller package. It lacks only a DC power jack, and uses the more compact Mini USB (Mini-B) connector instead of a standard USB connector. It is compatible with Arduino programs and the Arduino IDE. This version of the Nano uses the CH340G USB interface controller. It can be powered via the Mini-B USB connection, a 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. Features: CH340G USB bus converter chip replaces FT232RL Operating Voltage（logic level): 5V 8 analog inputs ports: A0 – A7 14 Digital input / output ports: TX, RX, D2 – D13 6 PWM ports: D3, D5, D6, D9, D10, D11 1 pair of TTL level serial transceiver ports: RX / TX Uses Atmel Atmega328P-AU MCU with bootloader installed Support USB download and Power over Mini-B Mini USB connector Recommended input voltage: 7V – 12V DC on pin 30 or 5V on pin 27 Maximum input voltage limits: 6V – 20V Supports ISP download Supplied with connector pins (headers), not soldered to the board for user flexibility Package Includes: 1 X Nano V3.0 16MHz CH340
Out of stockESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
[ESP Modules] This is ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino. This small WIFI transceiver is the perfect solution for home Automation and IoT applications. It can be the replacement of your NRF24L01, it can talk to your WIFI router directly through the UART MCU’s (Rx, Tx). The ESP-12 module is one of the most complete of the ESP family as it allows you to use the biggest amount of pins of all of them. You can program this module to work stand alone with the Arduino IDE or with LUA as NodeMCU. The system is equipped with ESP8266 manifested leading features are: energy saving VoIP quickly switch between the sleep/wake patterns, with low-power operation adaptive radio bias, front-end signal processing functions. The ESP8266-03 is one of the smallest versions of this module. It includes a built-in ceramic antenna. Features : WS2812 Led on board. 802.11 b/g/n Wi-Fi Direct (P2P), soft-AP Integrated TCP/IP protocol stack Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, DCXO and power management units +19.5dBm output power in 802.11b mode Power down leakage current of <10uA Integrated low power 32-bit CPU could be used as an application processor SDIO 1.1 / 2.0, SPI, UART STBC, 1×1 MIMO, 2×1 MIMO A-MPDU & A-MSDU aggregation & 0.4ms guard interval Wake up and transmit packets in < 2ms Standby power consumption of < 1.0mW (DTIM3) Access Point and Station Modes. Package Includes : 1 x ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
ESP8266 D1 Mini V2 NodeMcu Lua WIFI IOT Development Board
[ESP Modules] D1 Mini V2 NodeMcu Lua WIFI IOT Development Board is a mini WIFI board based on ESP-8266EX. 11 digital input/output pins, all pins have interrupt/PWM/I2C/one-wire supported(except D0) 1 analog input(3.3V max input) and a Micro USB connection. The development board features WiFi-SoC ESP8266 and is made for fast Internet-of-Things (IoT) prototyping. It is flashed with the latest firmware version and can be set up and programmed right away with the onboard micro USB connection. With only a few lines of code, the NodeMCU Dev Kit connects to your local network and ready for control by other network members like computers and smartphones. The d1 mini is an ESP8266 development board that is compact, versatile, and very easy to use with the Arduino IDE. It supports natively by the Expressive SDK. Features : Use BRT (Bias Resistor Transistor) Easier into flash mode. 30% increase in radiating area Good stability. On-Board Switching Power Supply Specifications: Microcontroller ESP-8266EX Flash Memory 4MB Digital I/O Pins 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0) Analog Input Pins 1 (3.2V max input) Operating Voltage 3.3V Output 5V Compatible with Arduino, NodeMCU, and MicroPython Package Includes : 1 x D1 Mini V2 NodeMcu Lua WIFI IOT Development Board 2 x Long female pin 2 x Short female pin 2 x Normal pin
Out of stockESP-12F ESP8266 Wifi Wireless IoT Board Module
[ESP Modules] The ESP-12F ESP8266 WiFi Module is a powerful and low-cost WiFi transceiver module designed for Internet of Things (IoT) applications. Built around the ESP8266 SoC, this module integrates a full TCP/IP protocol stack, enabling microcontrollers to connect directly to WiFi networks. With its integrated 32-bit RISC processor, on-chip memory, and multiple communication interfaces, the ESP-12F module can either host an application independently or act as a WiFi adapter for another microcontroller such as Arduino, Raspberry Pi, or STM32. Each module is typically shipped with AT command firmware, allowing easy communication through UART serial interface. This means developers can quickly add WiFi functionality to existing hardware without complex programming. The ESP-12F version improves performance compared to earlier modules by offering: Stronger WiFi signal output Improved anti-interference capability Optimized PCB antenna design Better impedance matching The module supports station mode, soft-AP mode, and combined AP + station mode, making it highly versatile for IoT networking. Because of its high integration, small size, and low power consumption, the ESP-12F module is widely used in: IoT devices Home automation systems Smart appliances Wireless sensor networks Industrial monitoring systems ⭐ Key Features Based on ESP8266 SoC Built-in TCP/IP protocol stack Integrated 2.4GHz WiFi Supports Station / SoftAP / Station + AP modes Pre-programmed AT command firmware Compact SMD design Strong PCB antenna Low power consumption Multiple communication interfaces 🔧 Technical Specifications Model: ESP-12F Chipset: ESP8266 WiFi Standard: IEEE 802.11 b/g/n Frequency: 2.4 GHz Operating Voltage: 3.3V Maximum Current: ~240mA Standby Power: < 1mW Interface: UART / SPI / SDIO Baud Rate: 115200 (default) Communication Format: 8N1 Security: WPA / WPA2 Package Type: 32-Pin QFN Output Power: +19.5 dBm 📡 Supported Interfaces UART SPI SDIO 1.1 / 2.0 I2S (audio interface) Multiple GPIO pins 🎯 Applications IoT projects Smart home automation Wireless sensor networks Arduino WiFi connectivity Remote monitoring systems Industrial IoT applications 📦 Package Includes 1 × ESP-12F ESP8266 WiFi Module
ESP WROOM32 MCU Development Module – 38 Pin
[ESP Modules] This is ESP WROOM 32 MCU Development Module. ESP WROOM 32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding. The WROOM32 based modules with integrated flash. These modules are well suited for Wi-Fi and Bluetooth/Bluetooth LE-based connectivity applications and provide a solid dual-core performance and the clock frequency is adjustable from 80 MHz to 240 MHz. The user may also use power saving mode for the CPU and make use of the low-power coprocessor to constantly monitor the peripherals for changes or crossing of thresholds. ESP32S integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SDIO/SPI, UART, and I²C. Using Bluetooth, users can connect to their phone or broadcast low energy beacons for its detection. The use of Wi-Fi enables a large physical range, as well as a direct connection to the internet via a Wi-Fi router. Perfect for wearable electronic or battery-powered applications, the ESP32 chip uses less than 5µA. In addition, this module can support data rates of up to 150 Mbps and 22 dBm output power at the PA in order to allow for the widest physical range. ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller. The ESP32 is integrated with Antenna switches, RF Balun, power amplifiers, low-noise amplifiers, filters, and management modules, and the entire solution occupies the least area of PCB. 2.4 GHz Wi-Fi plus Bluetooth dual-mode chip, with TSMC Ultra-low power consumption 40nm technology, power dissipation performance, and RF performance is the best, safe and reliable, easy to extend to a variety of applications. Features: High performance-price ratio Small volume, easily embedded to other products Strong function with support LWIP protocol, Freertos Supporting three modes: AP, STA, and AP+STA Supporting Lua program, easily to develope Package Includes: 1 x ESP32 38Pin Development Board
Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
[Arduino Boards] 🔷 Nano V3 CH340 ATmega328P Development Board (Soldered Headers) Compatible with Arduino ATmega328P • CH340 USB Interface • Compact Design • Breadboard Friendly • Ready to Use The Nano V3 CH340 Development Board is a compact and powerful microcontroller board based on the ATmega328P-AU microcontroller. Fully compatible with the Arduino Nano platform, it offers the same functionality as the Arduino Uno in a much smaller, breadboard-friendly form factor, making it ideal for embedded systems, robotics, IoT, automation, and DIY electronics projects. This version features the CH340 USB-to-Serial converter, providing a cost-effective and reliable programming interface. The board comes with pre-soldered headers, allowing it to be plugged directly into a breadboard or PCB without additional soldering. Powered by the ATmega328P running at 16MHz, the Nano provides 14 digital I/O pins, 8 analog input pins, 6 PWM outputs, and supports communication protocols including UART, SPI, and I²C. The onboard bootloader allows programming directly through the Mini USB port using the Arduino IDE. The Nano can be powered through the Mini USB connector, an external 6–20V DC supply, or a regulated 5V input, with automatic power source selection for seamless operation. Note: Some computers may require the CH340 USB driver before the board is recognized. ⭐ Features Based on ATmega328P-AU microcontroller Compatible with Arduino Nano V3 CH340 USB-to-Serial interface Pre-installed Arduino bootloader Pre-soldered header pins Compact breadboard-friendly design 14 Digital I/O pins (6 PWM) 8 Analog input pins 16MHz crystal oscillator Mini USB interface for programming Automatic power source selection Manual reset button ICSP header for direct programming TX, RX, Power and L status LEDs Supports Arduino IDE 📋 Technical Specifications Product Type: Microcontroller Development Board Board Version: Nano V3 Microcontroller: ATmega328P-AU USB Interface: CH340G Operating Voltage: 5V Input Voltage (Recommended): 7V–12V DC Input Voltage Range: 6V–20V DC Digital I/O Pins: 14 PWM Channels: 6 Analog Input Pins: 8 Flash Memory: 32KB SRAM: 2KB EEPROM: 1KB Clock Speed: 16MHz USB Connector: Mini USB Communication Interfaces: UART, SPI, I²C Programming: Arduino IDE Bootloader: Pre-installed Board Dimensions: 43 × 18 mm Mounting: Breadboard Compatible 🔧 Applications Suitable for: Arduino Projects Robotics IoT Devices Home Automation Sensor Interfaces Embedded Systems Educational Projects Industrial Automation Data Logging LED Control Motor Control Smart Home Devices Wearable Electronics DIY Electronics Rapid Prototyping 📦 Package Includes 1 × Nano V3 CH340 ATmega328P Development Board (Soldered Headers) USB Cable Not Included ⚠️ Note Mini USB cable is not included. Some Windows computers may require the CH340 USB driver before programming the board. Compatible with the Arduino IDE after selecting Arduino Nano and the appropriate processor/bootloader settings. Product appearance, PCB color, and component layout may vary slightly depending on the manufacturing batch.
Pro Mini ATMEGA328P 3.3V/8M
[Arduino Boards] This is Pro Mini ATMEGA328P 3.3V/8MHz is a 3.3V Arduino running the 8MHz bootloader. Pro Mini ATMEGA328P come with connectors so that you can solder connector or wire with any orientation you need. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board. The Pro Mini is a microcontroller board base on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable to provide USB power and communication to the board. The Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes with headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Mini Arduino. Features : 8 analog input port: A0 ~ A7. A pair of TTL level serial port transceiver : RX / TX. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. Package Includes : 1 x Pro Mini ATMEGA328P 3.3V/8M (Official Version) 3 x Male Header connector.
Out of stockPro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
[Arduino Boards] This Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino development board has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with Running on 16MHz and 5V, this board will remind you a lot of other Arduino compatible boards that you like. There is a voltage regulator on board, so it can accept up to 12V DC. The Micro is a microcontroller board based on the ATmega32U4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard. The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. If you supply an unstable power supply board, be sure to connect to the “RAW”, not on the VCC pin. It has also added a PTC fuse and diode protection to the power circuit and to correct the RX and LED TX circuits. Features : ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. Pin Diagram: Package Includes : 1 x Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
Out of stockATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board
[Arduino Boards] The ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board is a micro-controller board base on the ATmega2560. It has a USB host interface to connect with Android based phones, base on the MAX3421e IC. It has 54 digital input/output pins (of which 15 can be used as PWM outputs); 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator; a USB connection, a power jack, an ICSP header, and a reset button. The MEGA ADK is base on the Mega 2560. Similar to the Mega 2560 and Uno, it features an ATmega8U2 program as a USB-to-serial converter. Revision 3 of the Mega ADK board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU(Device Firmware Upgrade) mode. The board has the following new features: 1.0 pin-out: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In the future, shields will be compatible both with the board that uses the AVR, which operate with 5V and with the Arduino Due which operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit. The Mega Arduino R3 Android Accessory Development Kit (ADK) can be powered via a USB connection or with an external power supply. The power source is selected automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm centre-positive plug into the board’s power jack. Leads from a battery can be inserted in the GND and Vin pin headers of the POWER connector. Because the Mega R3 Android Accessory Development Kit (ADK) is a USB Host, the phone will attempt to draw power from it when it needs to charge. When the ADK is powered over USB, 500mA total is available for the phone and board. Package Includes : 1 x Mega R3 Android Accessory Development Kit (ADK) board.
Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
[Arduino Boards] The Nano Board R3 with CH340 chip without USB Cable chipboard is based on the famous Arduino platform and does all the functions of Uno, but with a smaller footprint. The Nano Board R3 with CH340 chip without USB Cable is vital for your small project where you don’t need much of a pin-outs but the small size is very important to make it look good. This Nano equips a low-cost USB-Serial Chip that makes it less in price than Nano with FTDI USB-Serial Chip used on older versions of Arduino Nano. The Nano Arduino is a small, complete, and breadboard-friendly board based on the ATmega328 (Nano R3). It has more or less the same functionality of the Uno but in a different package. It lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one. The Nano can be power via the mini-USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. The size of Nano V3.0 with CH340 Chip is only 43 mm x 18 mm; it comes with 6 PWM I/O from the total of 14 digitals I/O, 8 analog inputs, 16Mhz clock speed and 32kB of flash memory. Note:- CH340 chip might not work directly with some PC/Laptop, you will need some ch340 drivers. This board comes with OLD BOOTLOADER buy it accordingly Features : 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Support USB download and Power Support for external 5V ~ 12V DC power supply It Supports power supply by 9V battery Support ISP download Automatic reset during program download. Power OK blue LED on the bottom. Green (TX), red (RX) and orange (L) LED. +5V to AREF jumper. Auto-sensing/switching power input. Small mini-B USB for programming and serial monitor. ICSP header for direct program download. Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Package Includes : 1 x Nano Board R3 with CH340 chip without USB Cable compatible with Arduino (Unsoldered)
Out of stockUno+WiFi R3 AtMega328p+NodeMSU ESP8266 Compatible for Arduino UNO
[Arduino Boards] Arduino UNO WIFI ESP8266 CH340 Development Board Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 8MB Memory USB-TTL CH340G Compatible for Arduino UNO is full integration on one board: Uno R3 ATmega 328 and WiFi ESP8266 with memory 8Mb (MegaByte). All of the modules can work together or separately. And everyone has their own pinout headers. The convenient solution for the development of new projects requiring Uno and WiFi. Via USB you can update sketches and firmware for ATmega328 and for ESP8266. For this onboard have the USB-serial converter CH340G. It is a modernized version of the classic Arduino UNO R3 board. Full integration of a microcontroller ATmega328 and a Wi-Fi chip ESP8266 with 8 MB memory on one board. All modules can work together or individually. Each of the microcontrollers has led to connecting peripheral sensors and modules. A convenient solution for developing new projects that require Wi-Fi. Through USB, you can update sketches and firmware for both ATmega328 and ESP8266. For this on board, there is a UART converter CH340G. The board has a DIP switch, which switches the modes of interaction of microcontrollers ATmegaa328 and esp8266. The operations of this board are very simple. The board has a DIP switch, to connect the modules. For example, USB and ATmega328, USB and ESP8266, ATmega328 and ESP8266. Table DIP- switch: Connection DIP 1 2 3 4 5 6 7 ATmega328<->ESP8266 ON ON OFF OFF OFF OFF OFF USB <->ATmega328 OFF OFF ON ON OFF OFF OFF USB<->ESP8266 (Update firmware or sketch) OFF OFF OFF OFF ON ON ON USB<->ESP8266 (communication) OFF OFF OFF OFF ON ON OFF All independent OFF OFF OFF OFF OFF OFF OFF Features: USB-TTL converter. USB5V (500mA max.)Power IN. Logic Level: 5V. Operating Supply Voltage: 5V. Digital I/O Pins: 14. Analog I/O Pins: 6. Interface Type: serial. Operating temperature: −40С°/+125С°. Specifications: Microcontroller ATmega328IC Wi-Fi Module ESP8266 Input supply voltage (V) 3.3 ~ 5 Current consumption (mA) 800 USB to serial converter CH340G VIN/DC Jack (V) 9 ~ 24 WiFi 802.11 b/g/n 2.4 GHz USB type Micro USB USB Clock Frequency (MHz) 16 Memory Size (MB) 8 Package Includes: 1 x Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 Compatible for Arduino UNO
USB to UART/ESP8266 Adapter Programmer for ESP-01 Wi-Fi Modules with CH340G Chip
[Development Board, ESP Modules] ESP8266 Adapter Programmer / USB TO UART Converter for ESP8266 This USB to UART/ESP8266 Adapter Programmer for ESP-01 WiFi Modules with CH340G Chip converts the signal from a USB interface to a PC / laptop to match a serial module ESP8266. This converter module has a CH340 chip which is reliable and with high performance. It is compatible with most Windows systems. The adapter features integrated capacitors to maintain a current of 1000 μF. USB to ESP-01 adapter module has CH340G USB to TTL driver IC onboard, so you can easily use your computer to do ESP-01 functional debugging. ESP-01 serial wifi module can be directly plugged into the yellow pin header without any connecting wire. USB to UART/ESP8266 Programmer used for an ESP-01 module with the ESP8266 chip. It has CH340G USB to TTL driver IC onboard, so you can easily use your computer to do with ESP-01. Features : Using CH340 turns serial port chip for stable performance and compatibility. Supports all basic windows versions. The adapter plate integrated 1000μF solid capacitors to ensure the current supply The power supply will not be a problem to make the WIFI module crashes unresponsive. Using a 3225 SMD crystal oscillator, improves the stability of serial work, on a beautiful and tall. The interposer board is specifically designed for ESP8266 The USB Turn serial port. Package Includes : 1 x USB to UART/ESP8266 Adapter Programmer for ESP-01 Wi-Fi Modules with CH340G Chip ESP8266 Wifi Modules
Out of stockLeonardo R3 Board Micro-USB compatible with Arduino
[Arduino Boards] The Leonardo R3 Board Micro-USB compatible with Arduino is a micro-controller board base on the ATmega32u4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs); a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Leonardo R3 Board differs from all preceding boards in that the ATmega32u4 has built-in USB communication; eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard; in addition to a virtual (CDC) serial / COM port. It also has other implications for the behavior of the board. Features : It’s a 100% pro micro Arduino Compatible Board. Chip: ATmega32u4 Board Mode: LEONARDO R3 Color: As shown in the pictures Microcontroller: ATmega32u4 Operating Voltage: 5V Input Voltage (Recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 20 PWM Channels: 7 Analog Input Channels: 12 Package Includes : 1 x Leonardo R3 Board