All products · 56 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Only 1 leftHookup Wires (Red & Black, 100m each)
Red & Black set, 100 meters each.
Out of stockHeat Shrink Tubing Kit (280 pc, 8 sizes)
2:1 ratio heat shrink, 6 colours × 8 diameters (Ø1.5mm to 13mm). DIY essential.
Out of stock0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306
[LED/LCD Display] 0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306 The 0.96-inch Blue OLED Display Module is a compact graphical display based on the SSD1306 driver IC, featuring a 128×64 pixel resolution and blue monochrome display. This version has a 7-pin interface with a dedicated CS (Chip Select) pin, making it suitable for 4-wire SPI communication. The module is factory-configured for SPI and can also be modified for I2C/IIC communication on compatible board versions. With its compact size, wide viewing angle and low-power OLED technology, it is suitable for Arduino, ESP32, ESP8266, STM32, Raspberry Pi and other microcontroller projects. ⭐ Key Features 0.96-inch blue OLED display 128 × 64 pixel resolution SSD1306 driver IC 7-pin interface Dedicated CS (Chip Select) pin Factory configured for 4-wire SPI Supports SPI and I2C/IIC with appropriate configuration 3.3V/5V compatible on supported module versions No backlight required Low power consumption Wide viewing angle of more than 160° Compact PCB design Pre-soldered 7-pin male header Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi projects 📋 Technical Specifications Display Type: OLED (Organic Light-Emitting Diode) Display Colour: Blue Display Size: 0.96 inch Driver IC: SSD1306 Resolution: 128 × 64 pixels Interface: SPI / I2C Default Interface: 4-wire SPI Input Voltage: 3.3V–5V Viewing Angle: >160° Module Dimensions: Approximately 27 × 27 × 4mm Operating Temperature: Approximately -30°C to +70°C Header: 7-pin male header, pre-soldered Display Type: Monochrome blue OLED 🔌 7-Pin Interface The 7-pin version provides the following connections: GND – Ground VCC – Power supply D0 / SCK / CLK – SPI clock D1 / MOSI / SDA – SPI data RES / RST – Display reset DC / A0 – Data/Command selection CS – Chip Select 🛠️ SPI Connection The module is normally supplied in 4-wire SPI configuration. For an Arduino Uno, a typical connection is: VCC → 5V GND → GND D0 → SCK / D13 D1 → MOSI / D11 RES → Digital I/O DC → Digital I/O CS → Digital I/O The dedicated CS pin allows the OLED to share the SPI bus with other devices such as SD cards or additional SPI peripherals. 🔄 I2C / IIC Configuration On compatible versions, the module can be converted from SPI to I2C by changing the appropriate resistor configuration on the PCB. The supplied board configuration may require: Moving the resistor from R3 to R1 Shorting R8 with solder Using D0 as SCL Using D1 as SDA Configuring DC for the I2C address The exact resistor positions can vary between board revisions, so check the markings on your particular PCB before modification. 🎯 Applications Arduino projects ESP32 projects ESP8266 projects STM32 development Raspberry Pi projects IoT devices Sensor displays Voltage/current meters Battery monitors Temperature displays Digital clocks Data loggers Portable electronic devices Robotics DIY measuring instruments Embedded systems Menu and status displays 💡 Advantages of OLED OLED technology is self-emissive, meaning the pixels produce their own light and do not require a conventional backlight. This provides high contrast, compact construction and a wide viewing angle while keeping power consumption relatively low. ⚠️ Important Notes This is the 7-pin SPI version, not the 6-pin version. The module is normally configured for SPI communication. Check the PCB labels before connecting the module. Do not exceed the specified supply voltage. Although many versions support 5V operation, the exact voltage tolerance can vary between board revisions. I2C operation may require hardware resistor modification. The actual PCB layout and component markings may vary slightly between production batches. Display colour: Blue. Libraries such as Adafruit SSD1306 and U8g2 can be used with compatible microcontrollers. 📦 Package Includes 1 × 0.96 Inch Blue SPI OLED Display Module
KWS-MX18 10-in-1 USB Tester Digital LCD Voltage, Current & Power Meter
[Ammeter and Voltmeter] KWS-MX18 10-in-1 USB Tester – Digital LCD Voltage, Current & Power Meter The KWS-MX18 10-in-1 USB Tester is a compact multifunction digital testing instrument designed for monitoring and evaluating USB chargers, power banks, USB ports, mobile charging systems, and other DC power sources. It provides real-time measurement of voltage, current, power, capacity, energy, charging time, resistance, and internal temperature on its digital display. The tester supports a DC voltage range of 4–30V and current measurement up to approximately 5.1A, with power measurement up to 150W. It also provides capacity and energy monitoring, making it useful for checking the actual charging performance and capacity of USB power supplies and power banks. ⭐ Key Features 10-in-1 multifunction USB tester Digital LCD display Real-time voltage and current monitoring Measures power consumption Measures accumulated charging capacity Measures energy consumption Charging time measurement Charging resistance measurement Internal temperature measurement Positive and negative voltage measurement Stores measurement data in 9 groups Power-off memory function Compact and lightweight design Suitable for USB charger and power-bank testing Supports QC2.0 / QC3.0 according to available product information 📋 Technical Specifications Product Type: 10-in-1 USB Digital Tester Model: KWS-MX18 Input Voltage Range: DC 4–30V Current Measurement: 0–5.1A Power Measurement: 0–150W Capacity Measurement: 0–999999mAh Energy Measurement: 0–999999mWh Timing Range: 0–99 Hours Charging Resistance: 0–999.9Ω Internal Temperature: 0–80°C Positive Voltage Measurement: 0–10V Negative Voltage Measurement: 0–10V Memory Groups: 1–9 Display: Digital LCD Material: ABS Dimensions: Approximately 56.6 × 24.7 × 11.2mm Weight: Approximately 13.9g Input Connector: USB Output Connector: USB Function Button: Yes 🔍 10 Measurement Functions Voltage: 4–30V DC Current: 0–5.1A Power: 0–150W Capacity: 0–999999mAh Energy: 0–999999mWh Charging Time: 0–99 hours Charging Resistance: 0–999.9Ω Positive Voltage: 0–10V Negative Voltage: 0–10V Internal Temperature: 0–80°C 💾 Memory Function The KWS-MX18 can store charging measurement information in 9 separate memory groups. This allows you to compare charging capacity and energy measurements from different chargers or devices. The stored data can be viewed using the function button, and an individual memory group can be cleared by holding the button for approximately 3 seconds. 🔘 Button Functions Single Press: View stored measurement data from memory groups 1–9. Long Press: Clear the currently selected memory group. Double Press: Change the display page. Calibration: The device supports voltage and current calibration according to the supplied manual. 🔌 Applications USB Charger Testing Mobile Charger Testing Power Bank Testing USB Port Testing Mobile Phone Charging Analysis USB Cable Testing Power Supply Monitoring DC Power Measurement Electronics Troubleshooting DIY Electronics Projects Charger Performance Testing Battery Charging Analysis 🛠️ How to Use Connect the KWS-MX18 in-line between the USB power source and the USB-powered device. Once powered, the LCD displays the measured electrical parameters. You can use the function button to change display pages and access stored measurement data. It is particularly useful for comparing chargers, power banks, cables, and USB ports by monitoring actual voltage, current, power, capacity, and energy delivered. 📦 Package Includes 1 × KWS-MX18 10-in-1 USB Digital Tester ⚠️ Color Note: Color: White / Black Color will be shipped depending on stock availability. Any one color (White or Black) may be shipped based on available stock. Specific color cannot be guaranteed. ⚠️ Precautions Do not exceed the specified 30V DC input voltage. Do not exceed the specified current measurement range. Ensure correct USB connection direction before use. Keep the tester away from water and excessive moisture. Do not use it for measuring mains AC voltage. The device is intended for DC/USB power measurement. Actual measurement accuracy can depend on the connected source, load, cable, and operating conditions.
1K Ohm Rotary Potentiometer Round Shaft 3 Pin Elcon
[Potentiometer] 1KΩ Rotary Potentiometer Round Shaft Elcon The 1KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 1KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 10mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 1KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 10mm Body Diameter / Width: 16mm Total Height: Approx. 25mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 1KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 1KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch before installation.
5K Ohms Rotary Potentiometer Round Shaft 3 Pin Elcon
[Potentiometer] 5KΩ Rotary Potentiometer Round Shaft Elcon The 5KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 5KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 13mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 5KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 13mm Body Diameter / Width: 16mm Total Height: Approx. 28mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 5KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 5KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch
Digital Multimeter Test Leads with Ultra Sharp Needle Probe & Banana Plug CAT III 1000V 10A for SMD
[Hook up wire] The Digital Multimeter Test Lead Kit is a high-quality replacement probe set designed for accurate electrical measurements and electronic troubleshooting. Featuring ultra-sharp stainless steel needle probes, these leads allow easy access to miniature IC pins, SMD components, PCB tracks, LEDs, and other small electronic devices without causing damage. The probes are fitted with standard 4mm banana plug connectors, making them compatible with most digital multimeters, clamp meters, bench meters, and testing equipment from brands such as Fluke, Extech, Mastech, Uni-T, Victor, Sanwa, and many more. Constructed using high-quality PVC insulated cables and durable metal probes, the leads provide excellent flexibility, low resistance, and long service life. The CAT III safety rating ensures safe operation up to 1000V with a maximum current rating of 10A, making them suitable for both electronics and electrical testing. The built-in protective finger guards improve operator safety, while the flexible cables remain tangle-free during continuous testing. These probes are ideal for laboratory work, electronics repair, field service, educational laboratories, industrial maintenance, and DIY electronics projects. 🔹 Key Features Ultra-sharp stainless steel needle probes Standard 4mm banana plug connectors CAT III 1000V safety rating Maximum current rating: 10A Flexible PVC insulated cables Accurate low-resistance measurements Comfortable insulated probe handles Durable construction for long service life Compatible with most digital multimeters Ideal for PCB, SMD, IC and electrical testing 🔹 Technical Specifications Product Type: Digital Multimeter Test Leads Probe Type: Ultra Sharp Needle Probe Probe Colors: Red & Black Connector Type: 4mm Banana Plug Cable Material: PVC Insulated Probe Material: Stainless Steel / Metal Cable Length: Approx. 83cm Total Length: Approx. 103cm Maximum Current: 10A Maximum Voltage: 1000V Safety Rating: CAT III 1000V Measurement Type: Voltage, Current, Resistance, Continuity Compatibility: Most Digital Multimeters 🔹 Compatible With Fluke Multimeters Extech Multimeters Mastech Multimeters UNI-T Multimeters Victor Multimeters Sanwa Multimeters DT830 Series DT9205 Series Most multimeters with 4mm banana sockets 🔹 Applications Suitable for: Digital multimeters PCB testing SMD component testing IC pin testing LED testing Continuity testing Voltage measurement Current measurement Electronics repair Laboratory testing Industrial maintenance DIY electronics projects 🔹 Package Includes 1 × Red Multimeter Test Lead 1 × Black Multimeter Test Lead
10-in-1 USB & Type-C Digital Tester – IPS Voltmeter, Ammeter, Impedance & Capacity Meter
[Ammeter and Voltmeter] The 10-in-1 USB & Type-C Digital Power Tester is a multifunction USB measurement instrument developed for engineers, technicians, hobbyists, and electronics enthusiasts. It accurately monitors USB charging performance while providing comprehensive electrical measurements for USB-A and USB Type-C devices. Equipped with a bright IPS true-color LCD display, the tester simultaneously displays ten important charging parameters including Voltage, Current, Power, Capacity (mAh), Energy (mWh), Cable Resistance, Temperature, Charging Time, D+ Voltage, and D− Voltage. The tester features both USB-A and USB Type-C input/output interfaces, allowing compatibility with traditional USB chargers as well as modern USB-C Power Delivery devices. It supports testing of fast chargers, mobile phones, tablets, laptops, power banks, USB cables, and various USB-powered electronics. With support for measurements up to 150W and 5A, this tester is suitable for high-power USB-C PD chargers while consuming less than 20mA of operating current. Built-in control buttons allow users to switch display modes, perform fast-charge diagnostics, and manage measurement functions easily. Its compact design makes it an excellent tool for electronics repair, charger verification, cable testing, battery capacity measurement, laboratory work, and DIY electronics projects. 🔹 Key Features Dual Interface: USB-A & USB Type-C Input/Output Supports USB PD and Fast Charging IPS Full Color LCD Display Measures Voltage, Current and Power Capacity (mAh) & Energy (mWh) Measurement Cable Resistance (Impedance) Measurement Internal Temperature Monitoring USB D+ / D− Voltage Detection Charging Timer Function High Accuracy Measurement Low Self Power Consumption Compact Portable Design Easy Operation with Dedicated Function Buttons 🔹 Technical Specifications Product Type: USB Digital Power Tester Display: IPS True Color LCD Input Interface: USB-A / USB Type-C Output Interface: USB-A / USB Type-C Maximum Power Measurement: 150W Maximum Current: 5A Voltage Measurement: USB Standard & USB-C PD Power Measurement Range: 0–150W Current Measurement: Up to 5A Capacity Measurement: mAh Energy Measurement: mWh Impedance Measurement Range: 1–999.9Ω Temperature Measurement: 0°C to 80°C USB D+ Voltage Range: 0–2.99V USB D− Voltage Range: 0–2.99V Timer Range: 999 Hours 59 Minutes Refresh Rate: Approximately 500ms Self Power Consumption: <20mA Operating Buttons: Mode / Power Dimensions: 76.9 × 38 × 11 mm 🔹 Applications This USB tester is suitable for: USB charger testing USB-C PD charger testing Power bank capacity testing Mobile charger verification Fast charging protocol diagnostics USB cable resistance testing Laptop USB-C charger testing Electronics repair DIY electronics projects Laboratory measurements Battery charging analysis Quality inspection of USB power supplies 🔹 Package Includes 1 × 10-in-1 USB & Type-C Digital Power Tester 🔹 Frequently Asked Questions (FAQ) What does "10-in-1" mean? It measures ten important parameters: Voltage, Current, Power, Capacity, Energy, Impedance, Temperature, Charging Time, D+ Voltage, and D− Voltage. Does it support both USB-A and USB Type-C? Yes. It features both USB-A and USB Type-C input and output interfaces. What is the maximum power it can measure? Up to 150W. What is the maximum current supported? Up to 5A. Can it test USB-C laptop chargers? Yes. It supports high-power USB-C PD chargers up to 150W. Can it measure charging cable quality? Yes. It measures cable impedance from 1Ω to 999.9Ω. Does it display temperature? Yes. It includes an internal temperature sensor with a range of 0°C to 80°C. Does it require batteries? No. It is powered directly from the connected USB source. Can it measure power bank capacity? Yes. It records charging capacity in mAh and mWh. Does it support fast charging protocols? Yes. It can monitor USB D+ and D− voltages, helping identify fast charging protocol handshakes.
Portable USB Bluetooth Audio Music Receiver Dongle Adapter – Wireless Audio Receiver
[Audio Receiver] The Portable USB Bluetooth Audio Music Receiver Dongle Adapter instantly converts any car stereo, home speaker, PC speakers, or audio system into a wireless Bluetooth-enabled music receiver. Simply plug the dongle into a USB power source, connect its audio output to AUX, and enjoy seamless wireless music streaming from your smartphone, tablet, or laptop. This compact Bluetooth receiver delivers crisp, high-quality audio with stable transmission—making it perfect for cars without built-in Bluetooth, wired speakers, home audio systems, and portable sound setups. It supports all Bluetooth-enabled devices and offers quick pairing, low power consumption, and wide compatibility. Whether you're upgrading your car audio or converting old speakers into wireless ones, this USB Bluetooth receiver provides an easy and affordable solution. ✅ Features Convert any speaker or car stereo into a Bluetooth audio receiver Provides high-quality wireless music streaming from mobile, tablet, or laptop USB-powered – plug into car charger, power bank, or USB port Stable Bluetooth connection with fast pairing Compatible with car stereos, home speakers, multimedia systems, and amplifiers Ultra-compact, lightweight, and easy to carry Supports all major Bluetooth audio devices No drivers required – plug & play operation **** 3.5mm jack or cable not included***** 📘 Specifications Device Type: USB Bluetooth Audio Receiver Bluetooth Version: Standard high-quality audio support Input Power: USB 5V Output: 3.5mm AUX audio Transmission Distance: Approx. 8–10 meters Compatibility: Android, iOS, laptops, tablets, car stereos, speakers, amplifiers Usage: Car audio upgrade, home audio wireless streaming, mobile speaker enhancement Design: Compact & portable
ZK-MT21 bluetooth 5.0 Subwoofer Amplifier Board 50WX2+100W 2.1 Channel Power Audio Stereo Amplifier Tone Board Bass AMP AUX
[Amplifier Board] ZK-MT21 2.1 Channel Bluetooth 5.0 Audio Amplifier Module – 50W × 2 + 100W Subwoofer The ZK-MT21 2.1 Channel Bluetooth Audio Amplifier Module is a compact high-power stereo amplifier board designed for DIY Bluetooth speaker and home audio projects. It supports Bluetooth 5.0 and AUX audio input and provides dedicated left, right and subwoofer channels with adjustable volume, bass, treble, subwoofer volume and subwoofer frequency controls. With a suitable DC power supply and properly matched speakers, the module can deliver up to 50W + 50W for the left/right channels and up to 100W for the subwoofer channel. The board includes protection against reverse connection, overheating, overcurrent and short circuit. ⭐ Key Features Model: ZK-MT21 2.1 channel stereo audio amplifier Bluetooth 5.0 wireless audio input Bluetooth transmission distance up to approximately 15 meters under suitable conditions AUX wired audio input Left + Right + Subwoofer output Output up to 50W × 2 + 100W subwoofer Supports 4Ω–8Ω speakers Adjustable main volume Adjustable bass and treble for left/right channels Adjustable subwoofer volume Adjustable subwoofer frequency Subwoofer frequency adjustment range 20Hz–200Hz Reverse-polarity protection Overheat protection Overcurrent protection Short-circuit protection Compact amplifier board design Suitable for DIY Bluetooth speaker projects 📋 Technical Specifications Product Name: 2.1 Channel Audio Amplifier Module Model: ZK-MT21 Bluetooth Version: 5.0 Bluetooth Range: Approximately 15m Bluetooth Shielding: No shielding Audio Input: AUX + Bluetooth Channel: 2.1 Input Sensitivity: 500mV Amplifier Chip Solution: Domestic power amplifier chip Power Supply: DC 12–24V Recommended Supply Current: 5A or above Left Channel Output: <50W Right Channel Output: <50W Subwoofer Output: <100W Total Configuration: 50W × 2 + 100W Compatible Speaker Impedance: 4–8Ω Recommended Speaker Power: 20–100W Subwoofer Frequency Adjustment: 20Hz–200Hz Product Dimensions: 93 × 90 × 22mm Package Weight: Approximately 185g Protection: Reverse connection, overheat, overcurrent and short circuit ⚠️ Power Supply Warning:Do not connect this module directly to a 24V battery pack. Use a suitable regulated DC power supply as specified for the module. 🎛️ Control Functions MAIN-VOLUME: Controls the overall volume of the left, right and subwoofer channels. R&L CHANNEL-BASS: Adjusts bass level for the left and right channels. R&L CHANNEL-TREBLE: Adjusts treble level for the left and right channels. SUBWOOFER-VOLUME: Controls the subwoofer volume. SUBWOOFER-FREQ: Adjusts the subwoofer cutoff frequency from approximately 20Hz to 200Hz. 🔊 Speaker Selection Left and right channels can be connected to 4Ω–8Ω full-range or mid/high-frequency speakers. Recommended speaker power is 20W–100W. The subwoofer output should be connected to a suitable subwoofer speaker, not a regular full-range speaker. The subwoofer should have suitable low-frequency performance, with the source information recommending a frequency capability of at least 50Hz. Speaker impedance and power should be matched correctly with the amplifier. 🔌 Power Supply Selection The power supply is important for achieving proper amplifier performance and sound quality. A power supply with excessive ripple may increase background noise. Recommended supply: 18V / 19V / 24V with current above 5A Lower-voltage or lower-current supplies can be used, but available output power will be reduced. Insufficient supply current can cause voltage drop, abnormal operation or poor sound quality. If the amplifier is operated near maximum volume, an inadequate power supply may result in distortion. The power supply should have sufficient capacity for the actual amplifier load. Higher supply voltage can provide greater available output power within the module's specified operating range. 📱 Bluetooth & AUX Input The ZK-MT21 provides two audio input methods: Bluetooth Bluetooth 5.0 wireless audio input Bluetooth is the preferred input mode according to the supplied product information. Bluetooth supports automatic reconnection. Once Bluetooth is successfully connected, the module operates in Bluetooth mode. AUX Connect an external audio source through the AUX input. When using AUX, ensure the Bluetooth connection has been disconnected if necessary. 🔧 Applications DIY Bluetooth speakers 2.1 channel speaker systems Home audio projects Portable audio systems Subwoofer amplifier projects Custom speaker cabinets Desktop speaker systems Multimedia speaker systems Electronics and audio DIY projects Replacement/custom amplifier systems 🛠️ Installation & Usage Connect a suitable DC 12–24V power supply to the amplifier module. Connect the left and right speakers to their respective output terminals. Connect a suitable subwoofer to the subwoofer output. Ensure the speaker impedance is within the supported 4–8Ω range. Connect the audio source through Bluetooth or AUX. Adjust the main volume, bass, treble, subwoofer volume and frequency according to your requirements. Start with a low volume and gradually increase it. Ensure adequate ventilation and heat dissipation during high-power operation. ⚠️ Important Precautions Do not connect directly to a 24V battery pack. Use a suitable regulated DC power supply. Do not reverse the power supply polarity. Do not short-circuit the speaker outputs. Do not exceed the recommended speaker power and impedance. Ensure the power supply can provide sufficient current. Insufficient power may cause distortion or abnormal operation. Excessive load can cause the amplifier to heat up and activate thermal protection. Provide adequate ventilation during high-power operation. If distortion occurs at high volume, reduce the volume or use a more suitable power supply. The amplifier's actual output depends on the power supply, speaker impedance, audio input and overall system configuration. 📦 Package Includes 1 × ZK-MT21 Bluetooth 5.0 2.1 Channel Audio Amplifier Module
Li-Ion 18650 Rechargeable Battery 1200MAH Wired With BMS
[Lithium Battery Cell] Li-Ion 18650 Rechargeable Battery 1200MAH Wired With BMS Li-Ion Rechargeable Battery Nominal Specifications : Standard discharge capacity : Min. 1200mAh Nominal voltage : 3.63 V Maximum charge voltage : 4.20 V Standard charge current : CCCV, 1.3A, 4.20V, 20mA or 3hr cut-off Charging time Standard charge : 180min (@ RT) Rapid charge : 150min (@ RT) Max. continuous discharge : 1.2A (@ RT) Discharge cut-off voltage : 2.75V (End of discharge) Cell weight : 38.0g max (Approx) Cell dimension Height : Max. 65.00 mm Diameter : Max. 18.4 mm Operating temperature (Cell Surface temperature) Charge : 0 to 45℃ Discharge: -10 to 60℃ Colour may Be different from Picture shown Please ensure the standard precautions while using Li-ion cells to not puncture or damage the cells. Also please ensure that the charging and discharging parameters and temperatures are maintained within the specifications for achieving the longer cell life and optimal performance.
Insulation Filament Tape 50mm 50 meters
[Filament Tape] Tapes are used widely in all applications where you need adhesive to hold together two things, hold things in place, make them stick to a place, provide insulation against electricity, water, and other chemicals, etc. and the possibilities of the applications are infinite. We need a strong adhesive tape for applications where we need reliable adhesive application so this cross-filament tape is ideal for the applications with these requirements. This has cross-threaded filaments which increase the grip level of the tape on the object on which it has to be used so that it does not slip out and cause unnecessary loss of property. It has a width of 50mm so it is wide enough for most applications. Note: Image may vary in terms of color The Insulation Filament Tape (50mm x 50mtr) provides high-strength adhesion for electrical insulation, bundling, and securing applications. It features a durable filament-reinforced backing that provides excellent tensile strength and resistance to tearing. The tape adheres strongly to various surfaces, ensuring reliable performance even in demanding environments. Its insulation properties make it suitable for use in electrical and electronics industries, while its high durability supports bundling heavy cables and materials. The 50mm width and 50-meter length offer extensive coverage for industrial and professional tasks, making it an essential tool for maintenance, repair, and assembly applications. Features: Best Quality 50mm Filament Tape Most Powerful Adhesive Tape Pressure-sensitive tape Type: High-strength filament-reinforced adhesive tape Width: 50mm Length: 50 meters Material: Durable backing with strong adhesive Applications: Electrical insulation, bundling, securing cables and materials Features: Tear-resistant, high tensile strength, reliable adhesion Usage: Suitable for industrial, electrical, and repair tasks Package Includes: 1 x Insulation Filament Tape 50mm 50 meters
Out of stockDC 12V Mini 370 Diaphragm Pump Self-Priming Suction Pressure Water Pump
[DC Water Pump] DC 12V mini 370 Self-Priming Water pump Introducing DC 12V Mini 370 Self-Priming Water Pump at best price in India with . Designed for durability and this DC 12V Mini 370 Diaphragm Pump offers consistent performance with self-priming capability & ensure smooth operation even at varying pressure. Compact and lightweight, this 12V 370 mini water pump is perfect for application like aquariums, small fountain, and portable water system. With its robust suction capabilities, this DC 12V Self-Priming Suction Pressure Water Pump ensure effective water flow in diverse setting. Its low power consumption and quiet operation make it perfect for both indoor and outdoor use. Built with high quality material, this pump is resistant to wear & ensure reliable performance over time. Feature Self-Priming Mechanism: This DC 12V mini 370 Self-Priming Water pump pump feature a self priming design for efficient water transfer. It ensure stable performance even with changing water level. Compact and Lightweight: Its small size and low weight make it easy to use in small space. Perfect for portable application need minimal space usage. High Suction Power: This water pump deliver strong suction power for quick and effective water movement. It can handle low pressure condition without loosing output efficiency. Durable Build Quality: This DC 12V Mini 370 Diaphragm Pump made from high quality material, this pump offer long lasting durability and performance. It resists wear and tear & ensure reliable operation over time. Versatile Application: It is also perfect for aquarium, small garden, and DIY water circulation project. The pump works effectively for a variety of home and industrial uses. Specification Specification Details Operating Voltage 12V DC Current Consumption 0.5A – 1A (depending on load) Flow Rate 1.5-2.5 liters per minute Maximum Pressure Up to 2.5 bar (36 PSI) Suction Lift Up to 2 meters Discharge Head Up to 3 meters Motor Type 370 brushed motor Self-Priming Yes, capable of dry priming Body Material High-quality plastic with corrosion resistance Port Diameter Inlet and outlet: 4mm Noise Level Low noise operation (<65 dB) Lifespan Over 1000 hours of continuous operation Applications Water transfer, small irrigation systems, DIY project Dimensions 24x61x24mm Weight 60g Package Includes: 1 x DC 12V Mini 370 Diaphragm Pump Self-Priming Suction Pressure Water Pump
Insulation Filament Tape 25mm 50 meters
[Filament Tape] 🧵 Insulation Filament Tape 25mm × 50 Meter High Strength Reinforced Adhesive Tape High Tensile Strength • Strong Adhesive • Tear Resistant • Ideal for Electrical & Industrial Applications The Insulation Filament Tape (25mm × 50 Meter) is a premium-quality, filament-reinforced adhesive tape designed for applications requiring exceptional strength, durability, and reliable adhesion. Reinforced with cross-woven fiberglass filaments, this tape offers excellent tensile strength, making it ideal for bundling, securing, reinforcing, and insulating cables, cartons, pipes, and various industrial components. Its pressure-sensitive adhesive ensures a firm bond on a wide range of surfaces while maintaining excellent resistance to tearing, stretching, and wear. The tape is widely used in electrical work, packaging, logistics, manufacturing, automotive industries, and general repair applications. With a 25mm width and 50-meter roll length, this tape provides long-lasting performance for both professional and DIY use. ⭐ Features Premium quality filament-reinforced adhesive tape Strong pressure-sensitive adhesive High tensile strength for heavy-duty applications Cross-woven fiberglass reinforcement for extra durability Excellent tear and stretch resistance Reliable adhesion on multiple surfaces Suitable for electrical insulation and cable bundling Easy to apply and remove without splitting Ideal for industrial, commercial, and home use Long-lasting adhesive performance 📋 Technical Specifications Product Type: Filament Reinforced Adhesive Tape Tape Width: 25mm Tape Length: 50 Meter Tape Type: Cross Filament Reinforced Backing Material: Reinforced Fiberglass Filament Adhesive Type: Pressure Sensitive Color: Transparent / Clear (May vary by batch) Tear Resistance: High Tensile Strength: High Application Temperature: Suitable for general industrial use Application: Insulation, Bundling, Packaging, Reinforcement 🔧 Applications Suitable for: Electrical Insulation Cable Bundling Wire Harnessing Carton Sealing Heavy-Duty Packaging Shipping & Logistics Pipe Wrapping Industrial Assembly Appliance Manufacturing Automotive Wiring Warehouse Packaging Repair & Maintenance DIY Projects General Industrial Use 📦 Package Includes 1 × Insulation Filament Tape (25mm × 50 Meter) ⚠️ Note Image shown is for reference only. Product color or branding may vary depending on the manufacturing batch. Ensure the application surface is clean, dry, and free from dust or oil for maximum adhesion.
XY-LPWM Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display Module
XY-LPWM Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display Module is a two-channel PWM signal generator. It has dedicated switches for adjusting the frequency and duty cycle separately. Using this module PWM output, frequency and duty cycle can be set as per requirements. Communication Standard: 9600 bps Data bits: 8 Stop bit: 1 Check digit: none Flow control: none Set the frequency of the PWM “F101”: Set the frequency to 101 Hz (001 to 999) “F1.05”: set the frequency of 1.05 kHz (1.00 ~ 9.99) “F10.5”: Set the frequency to 10.5kHz (10.0 ~ 99.9) “F1.0.5”: set the frequency of 105kHz (1.0.0 ~ 1.5.0) Set the PWM duty cycle “DXXX”: set the PWM duty cycle to XXX; (001 ~ 100) Such as D050, set the PWM duty cycle is 50% Read the set parameters Send a “read” string to read the set parameters. Set successfully return: DOWN; Setup failed to return: FALL. Application: This is used to drive a stepper motor driver’s square wave. Generate an adjustable pulse for MCU. Generate an adjustable pulse for controlling relative circuit (PWM adjust lightspeed, etc). Used as a square wave signal generator for experimental development and use. Parameter Settings: The module has 4 switches, two for frequency adjustment and two for duty cycle adjustment. This module can generate frequencies between 1Hz and 150kHz, with automatic switching for different ranges. Frequency is divided into four ranges, automatic switching: 1. XXX (no decimal point): the smallest unit is 1Hz, the value range of 1Hz ~ 999Hz; 2. X.XX (decimal point in the hundred) the smallest unit is 0.01Khz, the range of 1.00Khz ~ 9.99Khz; 3. XX.X (decimal point in ten): the smallest unit is 0.1Khz; value range of 10.0KHz ~ 99.9KHz 4. X.X.X (decimal point in ten and hundred): the smallest unit is 1Khz; value range 1KHz ~ 150KHz 5. e.g. frequency display: 100 indicates PWM output 100Hz pulse; 1.01 indicates PWM output 1.01K pulse; 54.1 indicates that the PWM output has a pulse of 54.1 kHz; 1.2.4 indicates that the PWM output is 124 kHz pulse; Duty cycle range: 1 – 100%. In case of a power outage or if the module is powered down, the parameters that are set are saved automatically, so there is no need to set the parameters again. Single touch for increasing or decreasing single unit and long press for fast increasing or decreasing. Features: LCD display for frequency and duty cycle. Wide frequency range. High precision. Serial communication(TTL based). Package Includes: 1 x XY-LPWM Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display Module.
Digital Multimeter Test Leads with Ultra Sharp Needle Probe & Banana Plug CAT III 1000V 10A
[Hook up wire] The Digital Multimeter Test Lead Kit is a high-quality replacement probe set designed for accurate electrical measurements and electronic troubleshooting. Featuring ultra-sharp stainless steel needle probes, these leads allow easy access to miniature IC pins, SMD components, PCB tracks, LEDs, and other small electronic devices without causing damage. The probes are fitted with standard 4mm banana plug connectors, making them compatible with most digital multimeters, clamp meters, bench meters, and testing equipment from brands such as Fluke, Extech, Mastech, Uni-T, Victor, Sanwa, and many more. Constructed using high-quality PVC insulated cables and durable metal probes, the leads provide excellent flexibility, low resistance, and long service life. The CAT III safety rating ensures safe operation up to 1000V with a maximum current rating of 10A, making them suitable for both electronics and electrical testing. The built-in protective finger guards improve operator safety, while the flexible cables remain tangle-free during continuous testing. These probes are ideal for laboratory work, electronics repair, field service, educational laboratories, industrial maintenance, and DIY electronics projects. 🔹 Key Features Ultra-sharp stainless steel needle probes Standard 4mm banana plug connectors CAT III 1000V safety rating Maximum current rating: 10A Flexible PVC insulated cables Accurate low-resistance measurements Comfortable insulated probe handles Durable construction for long service life Compatible with most digital multimeters Ideal for PCB, SMD, IC and electrical testing 🔹 Technical Specifications Product Type: Digital Multimeter Test Leads Probe Type: Ultra Sharp Needle Probe Probe Colors: Red & Black Connector Type: 4mm Banana Plug Cable Material: PVC Insulated Probe Material: Stainless Steel / Metal Cable Length: Approx. 83cm Total Length: Approx. 103cm Maximum Current: 10A Maximum Voltage: 1000V Safety Rating: CAT III 1000V Measurement Type: Voltage, Current, Resistance, Continuity Compatibility: Most Digital Multimeters 🔹 Compatible With Fluke Multimeters Extech Multimeters Mastech Multimeters UNI-T Multimeters Victor Multimeters Sanwa Multimeters DT830 Series DT9205 Series Most multimeters with 4mm banana sockets 🔹 Applications Suitable for: Digital multimeters PCB testing SMD component testing IC pin testing LED testing Continuity testing Voltage measurement Current measurement Electronics repair Laboratory testing Industrial maintenance DIY electronics projects 🔹 Package Includes 1 × Red Multimeter Test Lead 1 × Black Multimeter Test Lead
Kapton 50mm x 33m High Temperature Resistant Tape for 3D Printers
[Kapton Tapes] The Kapton Polyimide Tape is a premium high-temperature insulating tape designed for electrical insulation, PCB masking, soldering, battery pack assembly, and 3D printing applications. Manufactured from high-quality polyimide film with a heat-resistant silicone adhesive, it provides exceptional thermal stability, excellent dielectric strength, and reliable insulation even under extreme temperatures. Measuring 50mm wide and 33 meters long, this tape is widely used as a build surface for 3D printers, where ABS and other engineering-grade filaments adhere well during printing while allowing clean removal after cooling. It also serves as an excellent masking tape during wave soldering, powder coating, and electronic component assembly. The tape offers outstanding resistance to heat, chemicals, abrasion, and solvents, leaving minimal adhesive residue after removal. Its excellent electrical insulation properties make it suitable for transformers, lithium battery packs, motors, coils, flexible PCBs, and various industrial applications. ⭐ Features Premium polyimide (Kapton) film construction High-temperature resistant silicone adhesive Excellent electrical insulation properties Strong adhesion with residue-free removal High dielectric strength Resistant to heat, chemicals, and solvents Flexible and easy to apply Ideal for 3D printer heated beds Suitable for solder masking and PCB protection Long service life 📋 Technical Specifications Product Type: High Temperature Polyimide Tape Material: Polyimide Film Adhesive Type: Silicone Adhesive Tape Width: 50mm Tape Length: 33 Meters Roll Type: Standard Roll Color: Metallic Brown (Amber) Temperature Resistance: Up to 200°C (Continuous) Electrical Insulation: High Dielectric Strength Residue After Removal: Minimal Application Surface: Glass, Aluminum, Metal, Plastic, PCB 🔧 Applications Suitable for: 3D Printer Heated Beds ABS 3D Printing PCB Manufacturing Wave Soldering Masking Reflow Soldering Lithium Battery Pack Insulation Transformer Insulation Motor Coil Insulation Flexible PCB Protection Electronics Repair Powder Coating Masking Laboratory Applications Industrial Electrical Insulation DIY Electronics Projects 📦 Package Includes 1 × Kapton Polyimide High Temperature Resistant Tape (50mm × 33 Meter)
High Quality Ultra Flexible 18AWG Silicone Wire 1m (Red) + 1m (Black)
[Silicon Wire] The High-Quality 18AWG Silicone Wire 1m (Red) + 1m (Black) pair has a pretty big diameter as compared to the normal 18AWG wire used in RC projects for serving its specific purpose. This wire has low resistance and high current carrying capacity. These are also used in LiPO batteries to deliver power to ESC’s. Ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. The wire is the first priority tool for carrying current from one circuit to other while their current carrying capacity is dependent upon the size of the wire. So the High Quality 18AWG Silicone Wire 1m (Red) + 1m (Black) both has the considerable diameter to suit your application. Please find out our more cable and wires. Click here Wires with the wide variety of silicon wire gauges and colors to suit your applications are available The 18AWG High Temperature Silicone Wire is a premium-quality flexible electrical cable designed for low to medium current applications requiring excellent flexibility and high-temperature resistance. Manufactured using high-purity tinned copper conductors with soft silicone rubber insulation, this wire provides outstanding electrical conductivity, corrosion resistance, and long service life. Rated for 600V and capable of operating continuously at temperatures up to 200°C, this silicone wire is suitable for battery packs, RC models, drones, LED lighting, robotics, power supplies, automotive wiring, solar systems, and DIY electronic projects. The tinned copper conductor ensures efficient current transfer with minimal voltage drop while resisting oxidation and corrosion. Its ultra-flexible silicone insulation allows easy routing through tight spaces and provides excellent durability in demanding environments. This package includes 1 meter of Red wire and 1 meter of Black wire, making it ideal for positive and negative wiring in electronic and electrical applications. ⭐ Features Premium 18AWG silicone insulated wire High-purity tinned copper conductor Ultra-flexible silicone insulation Rated for 600V operation Heat resistant up to 200°C Excellent electrical conductivity Corrosion-resistant tinned copper strands Easy to strip, solder, and terminate Soft, durable, and wear-resistant insulation Suitable for indoor and outdoor applications 📋 Technical Specifications Product Type: High Temperature Silicone Wire Wire Gauge: 18 AWG Conductor Material: Tinned Copper Insulation Material: High Temperature Silicone Rubber Rated Voltage: 600V Rated Temperature: 200°C Rated Current: 8A (Typical) Wire Type: Flexible Multi-Strand Marking: 18AWG 600V 200°C Wire Color: Red & Black Length: 1 Meter Red + 1 Meter Black (Total 2 Meters) 🔧 Applications Suitable for: Lithium Battery Packs RC Cars & RC Boats FPV Drones Model Aircraft Solar Power Systems LED Lighting Power Supplies Robotics Projects Arduino Projects ESP32 Projects Raspberry Pi Projects Automotive Wiring Electric Scooters & E-Bikes DIY Electronics Laboratory Equipment Industrial Control Panels 📦 Package Includes 1 × 18AWG High Temperature Silicone Wire – Red (1 Meter) 1 × 18AWG High Temperature Silicone Wire – Black (1 Meter)
0.28 inch 3.5-30V Two Wire DC Voltmeter Yellow
[Ammeter and Voltmeter] This is tiny and compact digital voltmeter with red LED Display. 0.28inch 3.5-30V Two Wire DC Voltmeter Yellow Panel requires only a few minutes of configuration and is as simple as directly connecting wires to the source you want to measure and seeing the LED blink!!!! The red wire is to connect to the positive pole, the black wire is to connect to the negative pole. No need to worry even if there is any connection mismatch of the wires, the electric circuit wont be a boom because it features reverse polarity protection. This voltmeter doesn't need external drive working power, it can work with measuring voltage, the working voltages range is 3.5-30V. To reach the best measurement accuracy, this voltmeter will automatically move the decimal points position according to the different measuring voltage. When it measures the voltage below 10V, it will display two places after the decimal point. When it measures the voltage above 10V, it will display one place after the decimal point. This voltmeter can be used to measure the storage battery's voltage in motorcycles and cars and also can grasp the storage batterys status. It also can be used to measure other voltage. 30V is the voltmeters maximum operating limited voltage, please leave enough margin when working, to avoid voltmeters permanent damage because of an electrical spark, power supply ripple, or other too high abrupt change of voltage. Very bight and decent LED Display is ready to measure the dc voltages in the range of 3.5V to 30V. Connections : Red Wire: source +ve terminal. Black Wire: Source -ve terminal. Note: The display weight and Dimensions may have2% error. Features : Very small and lightweight voltmeter module. Very handy and easy to use. Green LED display. Dont need the external power supply because it is a self-powered version of this display. Best operates in the working voltage range of 5V to 24V 100% Brand new and high quality. 📑 Additional Information Accuracy: 0.1 VColor: YellowWires: 2 (Two-Wire Design)Display ON Voltage: 2.5 VOperating Voltage: 3.6 V ~ 28 V DCCurrent Consumption: 15 mARefresh Speed: 200 ms (one update)Minimum Input Voltage: 3.6 VMaximum Input Voltage: 28 VOperating Temperature: -10°C to 60°CMounting Hole Distance: 3 cmHeight: 0.72 cmLength: 1.3 cmWidth: 3 cmWeight: 3 g Package Includes : 1 x 0.72 cm (0.28 inch) 3.5-30V Two Wire DC Voltmeter Yellow * Product Images are shown for illustrative purposes only and may differ from actual product.
0.28 inch 3.5-30V Two Wire DC Voltmeter Green
[Ammeter and Voltmeter] This is tiny and compact digital voltmeter with red LED Display. 0.28inch 3.5-30V Two Wire DC Voltmeter Green Panel requires only a few minutes of configuration and is as simple as directly connecting wires to the source you want to measure and seeing the LED blink!!!! The red wire is to connect to the positive pole, the black wire is to connect to the negative pole. No need to worry even if there is any connection mismatch of the wires, the electric circuit wont be a boom because it features reverse polarity protection. This voltmeter doesn't need external drive working power, it can work with measuring voltage, the working voltages range is 3.5-30V. To reach the best measurement accuracy, this voltmeter will automatically move the decimal points position according to the different measuring voltage. When it measures the voltage below 10V, it will display two places after the decimal point. When it measures the voltage above 10V, it will display one place after the decimal point. This voltmeter can be used to measure the storage battery's voltage in motorcycles and cars and also can grasp the storage batterys status. It also can be used to measure other voltage. 30V is the voltmeters maximum operating limited voltage, please leave enough margin when working, to avoid voltmeters permanent damage because of an electrical spark, power supply ripple, or other too high abrupt change of voltage. Very bight and decent LED Display is ready to measure the dc voltages in the range of 3.5V to 30V. Connections : Red Wire: source +ve terminal. Black Wire: Source -ve terminal. Note: The display weight and Dimensions may have2% error. Features : Very small and lightweight voltmeter module. Very handy and easy to use. Green LED display. Dont need the external power supply because it is a self-powered version of this display. Best operates in the working voltage range of 5V to 24V 100% Brand new and high quality. Additional information Accuracy 0.1 V Color Green Wires 2 Display ON Voltage (V) 2.5 Operating Voltage (VDC) 3.6 ~ 28 Current Consumption (mA) 15 Refresh Speed (ms) 200 (one time) Minimum Input (V) 3.6 Highest Input (V) 28 Operating Temperature (C). -10 to 60 Holes for Mounting 3 cm Height (cm) 0.72 cm Length (cm) 1.3 cm Width (cm) 3 cm Weight (gm) 3 gm Package Includes : 1 x 0.72 cm (0.28 inch) 3.5-30V Two Wire DC Voltmeter Green * Product Images are shown for illustrative purposes only and may differ from actual product.
0.28 inch 3.5-30V Two Wire DC Voltmeter Blue
[Ammeter and Voltmeter] This is tiny and compact digital voltmeter with red LED Display. 0.28inch 3.5-30V Two Wire DC Voltmeter Blue Panel requires only a few minutes of configuration and is as simple as directly connecting wires to the source you want to measure and seeing the LED blink!!!! The red wire is to connect to the positive pole, the black wire is to connect to the negative pole. No need to worry even if there is any connection mismatch of the wires, the electric circuit wont be a boom because it features reverse polarity protection. This voltmeter doesn't need external drive working power, it can work with measuring voltage, the working voltages range is 3.5-30V. To reach the best measurement accuracy, this voltmeter will automatically move the decimal points position according to the different measuring voltage. When it measures the voltage below 10V, it will display two places after the decimal point. When it measures the voltage above 10V, it will display one place after the decimal point. This voltmeter can be used to measure the storage battery's voltage in motorcycles and cars and also can grasp the storage batterys status. It also can be used to measure other voltage. 30V is the voltmeters maximum operating limited voltage, please leave enough margin when working, to avoid voltmeters permanent damage because of an electrical spark, power supply ripple, or other too high abrupt change of voltage. Very bight and decent LED Display is ready to measure the dc voltages in the range of 3.5V to 30V. Connections : Red Wire: source +ve terminal. Black Wire: Source -ve terminal. Note: The display weight and Dimensions may have2% error. Features : Very small and lightweight voltmeter module. Very handy and easy to use. Blue LED display. Dont need the external power supply because it is a self-powered version of this display. Best operates in the working voltage range of 5V to 24V 100% Brand new and high quality. Additional information Accuracy 0.1 V Color Blue Wires 2 Display ON Voltage (V) 2.5 Operating Voltage (VDC) 3.6 ~ 28 Current Consumption (mA) 15 Refresh Speed (ms) 200 (one time) Minimum Input (V) 3.6 Highest Input (V) 28 Operating Temperature (C). -10 to 60 Holes for Mounting 3 cm Height (cm) 0.72 cm Length (cm) 1.3 cm Width (cm) 3 cm Weight (gm) 3 gm Package Includes : 1 x 0.72 cm (0.28 inch) 3.5-30V Two Wire DC Voltmeter Blue * Product Images are shown for illustrative purposes only and may differ from actual product.
100K Rotary Potentiometer Round Shaft Elcon
[Potentiometer] 100KΩ Rotary Potentiometer Round Shaft Elcon The 100KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 100KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 13mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 100KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 13mm Body Diameter / Width: 16mm Total Height: Approx. 28mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 100KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 100KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch before installation.
10K Rotary Potentiometer Round Shaft 3Pin Elcon
[Potentiometer] 10KΩ Rotary Potentiometer Round Shaft Elcon The 10KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin variable resistor designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. The linear resistance characteristics make it particularly suitable for applications such as LED brightness control, fan speed control, motor control, and general-purpose voltage adjustment. ⭐ Key Features 10KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Useful for voltage and current adjustment Suitable for LED, fan and motor control applications Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 10KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 13mm Body Diameter / Width: 16mm Total Height: 30mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Arduino Projects DIY Electronics Projects Audio & Electronic Circuits Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 10KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 10KΩ value and ±20% tolerance are based on the supplied product specifications.
0.28 inch 3.5-30V Two Wire DC Voltmeter Red
[Ammeter and Voltmeter] This is tiny and compact digital voltmeter with red LED Display. 0.28inch 3.5-30V Two Wire DC Voltmeter Red Panel requires only a few minutes of configuration and is as simple as directly connecting wires to the source you want to measure and seeing the LED blink!!!! The red wire is to connect to the positive pole, the black wire is to connect to the negative pole. No need to worry even if there is any connection mismatch of the wires, the electric circuit wont be a boom because it features reverse polarity protection. This voltmeter doesn't need external drive working power, it can work with measuring voltage, the working voltages range is 3.5-30V. To reach the best measurement accuracy, this voltmeter will automatically move the decimal points position according to the different measuring voltage. When it measures the voltage below 10V, it will display two places after the decimal point. When it measures the voltage above 10V, it will display one place after the decimal point. This voltmeter can be used to measure the storage battery's voltage in motorcycles and cars and also can grasp the storage batterys status. It also can be used to measure other voltage. 30V is the voltmeters maximum operating limited voltage, please leave enough margin when working, to avoid voltmeters permanent damage because of an electrical spark, power supply ripple, or other too high abrupt change of voltage. Very bight and decent LED Display is ready to measure the dc voltages in the range of 3.5V to 30V. Connections : Red Wire: source +ve terminal. Black Wire: Source -ve terminal. Note: The display weight and Dimensions may have2% error. Features : Very small and lightweight voltmeter module. Very handy and easy to use. Red LED display. Dont need the external power supply because it is a self-powered version of this display. Best operates in the working voltage range of 5V to 24V 100% Brand new and high quality. Additional information Accuracy 0.1 V Color Red Wires 2 Display ON Voltage (V) 2.5 Operating Voltage (VDC) 3.6 ~ 28 Current Consumption (mA) 15 Refresh Speed (ms) 200 (one time) Minimum Input (V) 3.6 Highest Input (V) 28 Operating Temperature (C). -10 to 60 Holes for Mounting 3 cm Height (cm) 0.72 cm Length (cm) 1.3 cm Width (cm) 3 cm Weight (gm) 3 gm Package Includes : 1 x 0.72 cm (0.28 inch) 3.5-30V Two Wire DC Voltmeter Red * Product Images are shown for illustrative purposes only and may differ from actual product.