All products · 57 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Out of stockSanDisk Ultra microSDHC 32 GB (Class 10)
32 GB microSDHC, A1, 120 MB/s read. Smartphones, tablets, Raspberry Pi.
Out of stock0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306
[LED/LCD Display] 0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306 The 0.96-inch Blue OLED Display Module is a compact graphical display based on the SSD1306 driver IC, featuring a 128×64 pixel resolution and blue monochrome display. This version has a 7-pin interface with a dedicated CS (Chip Select) pin, making it suitable for 4-wire SPI communication. The module is factory-configured for SPI and can also be modified for I2C/IIC communication on compatible board versions. With its compact size, wide viewing angle and low-power OLED technology, it is suitable for Arduino, ESP32, ESP8266, STM32, Raspberry Pi and other microcontroller projects. ⭐ Key Features 0.96-inch blue OLED display 128 × 64 pixel resolution SSD1306 driver IC 7-pin interface Dedicated CS (Chip Select) pin Factory configured for 4-wire SPI Supports SPI and I2C/IIC with appropriate configuration 3.3V/5V compatible on supported module versions No backlight required Low power consumption Wide viewing angle of more than 160° Compact PCB design Pre-soldered 7-pin male header Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi projects 📋 Technical Specifications Display Type: OLED (Organic Light-Emitting Diode) Display Colour: Blue Display Size: 0.96 inch Driver IC: SSD1306 Resolution: 128 × 64 pixels Interface: SPI / I2C Default Interface: 4-wire SPI Input Voltage: 3.3V–5V Viewing Angle: >160° Module Dimensions: Approximately 27 × 27 × 4mm Operating Temperature: Approximately -30°C to +70°C Header: 7-pin male header, pre-soldered Display Type: Monochrome blue OLED 🔌 7-Pin Interface The 7-pin version provides the following connections: GND – Ground VCC – Power supply D0 / SCK / CLK – SPI clock D1 / MOSI / SDA – SPI data RES / RST – Display reset DC / A0 – Data/Command selection CS – Chip Select 🛠️ SPI Connection The module is normally supplied in 4-wire SPI configuration. For an Arduino Uno, a typical connection is: VCC → 5V GND → GND D0 → SCK / D13 D1 → MOSI / D11 RES → Digital I/O DC → Digital I/O CS → Digital I/O The dedicated CS pin allows the OLED to share the SPI bus with other devices such as SD cards or additional SPI peripherals. 🔄 I2C / IIC Configuration On compatible versions, the module can be converted from SPI to I2C by changing the appropriate resistor configuration on the PCB. The supplied board configuration may require: Moving the resistor from R3 to R1 Shorting R8 with solder Using D0 as SCL Using D1 as SDA Configuring DC for the I2C address The exact resistor positions can vary between board revisions, so check the markings on your particular PCB before modification. 🎯 Applications Arduino projects ESP32 projects ESP8266 projects STM32 development Raspberry Pi projects IoT devices Sensor displays Voltage/current meters Battery monitors Temperature displays Digital clocks Data loggers Portable electronic devices Robotics DIY measuring instruments Embedded systems Menu and status displays 💡 Advantages of OLED OLED technology is self-emissive, meaning the pixels produce their own light and do not require a conventional backlight. This provides high contrast, compact construction and a wide viewing angle while keeping power consumption relatively low. ⚠️ Important Notes This is the 7-pin SPI version, not the 6-pin version. The module is normally configured for SPI communication. Check the PCB labels before connecting the module. Do not exceed the specified supply voltage. Although many versions support 5V operation, the exact voltage tolerance can vary between board revisions. I2C operation may require hardware resistor modification. The actual PCB layout and component markings may vary slightly between production batches. Display colour: Blue. Libraries such as Adafruit SSD1306 and U8g2 can be used with compatible microcontrollers. 📦 Package Includes 1 × 0.96 Inch Blue SPI OLED Display Module
107 × 61mm 5V 180mA Mini Solar Panel Cell Module
[Solar Panel] ☀️ 107 × 61mm 5V 180mA Mini Solar Panel Cell Module (0.9W) 5V Output • 180mA Current • Polycrystalline Solar Cell • Compact & Lightweight • DIY Solar Projects The 107 × 61mm Mini Solar Panel Cell Module is a compact and efficient photovoltaic module designed to convert sunlight into clean and renewable electrical energy. Delivering a stable 5V output with a maximum current of 180mA, this solar panel is ideal for powering small electronic devices, battery charging circuits, educational projects, and DIY solar applications. Built using high-quality polycrystalline silicon solar cells, the panel provides efficient energy conversion with reliable performance under direct sunlight. Its compact size and lightweight construction make it easy to integrate into portable electronics, robotics, IoT devices, and renewable energy projects. Designed with a durable, weather-resistant construction, the module is suitable for both indoor demonstrations and outdoor applications. Pre-drilled mounting holes allow quick installation on enclosures, backpacks, models, and custom solar-powered devices. ⭐ Features High-efficiency polycrystalline solar panel Stable 5V DC output Maximum output current of 180mA Maximum power output of 0.9W Compact and lightweight design Efficient solar energy conversion Weather-resistant construction Pre-drilled mounting holes Easy integration into DIY projects Eco-friendly renewable energy source Maintenance-free operation Suitable for educational and hobby applications 📋 Technical Specifications Product Type: Mini Solar Panel Cell Module Panel Dimensions: 107 × 61 mm Cell Type: Polycrystalline Silicon Maximum Power Output: 0.9W Output Voltage: 5V DC Maximum Output Current: 180mA Conversion Efficiency: Approx. 17% Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +85°C Construction: Waterproof, Weather-Resistant Mounting: Pre-Drilled Mounting Holes Material: High-Quality Polycrystalline Silicon Weight: Approx. 16g 🔧 Applications Suitable for: DIY Solar Projects Solar Battery Chargers Mobile Charging Projects Arduino Projects ESP32 Projects Raspberry Pi Accessories Robotics IoT Devices Solar Garden Lights Educational Science Experiments Portable Electronics Renewable Energy Demonstrations Emergency Backup Projects Small DC Power Applications 📦 Package Includes 1 × 107 × 61mm 5V 180mA Mini Solar Panel Cell Module ⚠️ Note Output voltage and current depend on sunlight intensity, panel angle, and environmental conditions. For battery charging applications, use a suitable charge controller or charging module. Designed for low-power electronic projects and educational use. Product appearance and dimensions may vary slightly depending on the manufacturing batch.
3-in-1 Aluminum Heat Sink Set for Raspberry Pi 3
[Aluminium Heat Sink] ❄️ 3-in-1 Aluminum Heat Sink Set for Raspberry Pi 3 High-Quality Aluminum • Self-Adhesive Thermal Tape • Improved Cooling • Easy Installation The 3-in-1 Aluminum Heat Sink Set for Raspberry Pi 3 is a premium cooling accessory designed to improve heat dissipation and maintain stable operating temperatures for Raspberry Pi boards. Manufactured from high-quality aluminum, these heat sinks efficiently transfer heat away from critical components, helping improve performance and extend the life of your Raspberry Pi. The kit includes three aluminum heat sinks of different sizes to cool the processor, Ethernet/LAN controller, and other heat-generating ICs. Each heat sink comes pre-installed with a high-performance thermal adhesive backing, allowing quick and secure installation without the need for additional thermal paste or glue. By reducing operating temperatures, the heat sinks help prevent thermal throttling during continuous operation, making them ideal for overclocking, media centers, home servers, IoT applications, industrial automation, and embedded systems. ⭐ Features Premium-quality aluminum construction Excellent thermal conductivity Self-adhesive thermal tape for easy installation No thermal paste required Lightweight and durable Improves heat dissipation Reduces processor temperature Helps prevent thermal throttling Ideal for continuous operation and overclocking Designed specifically for Raspberry Pi boards Corrosion-resistant aluminum finish Easy peel-and-stick installation 📋 Technical Specifications Product Type: Aluminum Heat Sink Set Compatibility: Raspberry Pi 3 Model A, A+, B, B+ Material: Aluminum Color: Silver Quantity: 3 Heat Sinks Mounting Method: Self-Adhesive Thermal Tape Thermal Interface: Pre-applied Thermal Adhesive Cooling Type: Passive Cooling Weight: Lightweight Installation: Peel-and-Stick 🔧 Applications Suitable for: Raspberry Pi 3 Model B Raspberry Pi 3 Model B+ Raspberry Pi 3 Model A+ Raspberry Pi 3 Model A Raspberry Pi Media Center Home Automation Projects IoT Devices Embedded Systems Robotics Projects Industrial Controllers NAS Servers Retro Gaming Consoles AI Edge Computing Educational Projects DIY Electronics 📦 Package Includes 1 × Large Aluminum Heat Sink (CPU) 1 × Medium Aluminum Heat Sink (LAN/Ethernet Controller) 1 × Small Aluminum Heat Sink (Additional IC / Spare)
XH-W1219 12V Digital Temperature Controller Module with Dual LED Display & Waterproof NTC Sensor
[Relay Module, Temperature Sensor] 🌡️ XH-W1219 12V Digital Temperature Controller Module with Dual LED Display & Waterproof NTC Sensor Dual LED Display • 12V DC Operation • 10A Relay Output • Heating & Cooling Modes • Waterproof NTC Sensor The XH-W1219 12V Digital Temperature Controller Module is a high-precision thermostat controller designed for automatic temperature monitoring and control in heating and cooling applications. Powered by 12V DC, this module features a dual LED display that simultaneously shows the current temperature and set temperature, making operation more convenient than the popular W1209 controller. Equipped with a waterproof NTC 10K temperature sensor, the XH-W1219 accurately measures temperatures from -50°C to +110°C. The onboard 10A relay output can directly control heaters, cooling fans, pumps, compressors, and other electrical loads within its rated capacity. The module is based on a Nuvoton microcontroller, which stores all settings in non-volatile memory, ensuring that user configurations are retained even after power loss. It supports both Heating (H) and Cooling (C) modes, adjustable hysteresis, temperature calibration, delay start, and high-temperature alarm functions. Ideal for incubators, aquariums, refrigeration systems, greenhouse automation, HVAC equipment, battery temperature monitoring, and industrial automation, the XH-W1219 provides reliable and accurate temperature control in a compact module. ⭐ Features Dual LED display for simultaneous temperature and setpoint display Operates on 12V DC High-accuracy waterproof NTC 10K temperature sensor Temperature control range from -50°C to +110°C Supports Heating and Cooling modes Built-in 10A relay output Adjustable temperature hysteresis Temperature calibration function Adjustable relay delay start High-temperature alarm function Stores settings in non-volatile memory Easy configuration using three push buttons High measurement accuracy (0.1°C resolution) Based on a Nuvoton MCU Compact PCB design with mounting holes 📋 Technical Specifications Product Type: Digital Temperature Controller Module Model: XH-W1219 Operating Voltage: 12V DC Display: Dual 3-Digit LED (Current Temperature & Set Temperature) Temperature Sensor: Waterproof NTC 10K Thermistor Temperature Control Range: -50°C to +110°C Temperature Resolution: 0.1°C Temperature Calibration: -10°C to +10°C Relay Output: 10A (Maximum) Relay Contact Rating: Up to 120VAC 10A / 14VDC 10A Control Modes: Heating (H) / Cooling (C) Hysteresis Setting: 0.1°C to 30°C Delay Start: 0–10 Minutes High Temperature Alarm: -49°C to +110°C Memory: Non-Volatile Parameter Storage Controller: Nuvoton MCU Dimensions: Approx. 60 × 44 × 17 mm Weight: Approx. 22 g (may vary slightly by manufacturer) ⚙️ Parameter Functions Parameter Description P0 Heating (H) / Cooling (C) Mode Selection P1 Temperature Hysteresis (Return Difference) P2 Maximum Temperature Limit P3 Minimum Temperature Limit P4 Temperature Calibration P5 Relay Delay Start (0–10 Minutes) P6 High Temperature Alarm Setting 🔧 Applications Suitable for: Egg Incubators Aquarium Temperature Control Greenhouse Automation Refrigeration Systems Cooling Fans Heating Elements Water Heaters HVAC Systems Fermentation Equipment Battery Temperature Monitoring Industrial Automation Laboratory Equipment DIY Electronics Smart Home Projects Arduino & Raspberry Pi Projects (Relay Interface) 📦 Package Includes 1 × XH-W1219 12V Digital Temperature Controller Module 1 × Waterproof NTC 10K Temperature Sensor ⚠️ Note Operates only on 12V DC. The relay output is rated for 10A maximum. For higher-power loads, use an external contactor or relay. Sensor cable can be extended if required using appropriate wiring. Product appearance or PCB color may vary slightly depending on the manufacturing batch.
5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal
[Power Connector] 🔌 5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal (Male / Female) Standard DC Barrel Connector • 2-Pin Screw Terminal • Solder-Free Installation • Up to 5A Current Rating The 5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal is a convenient and reliable connector designed for quick and secure DC power connections without soldering. Compatible with the industry-standard 5.5mm outer diameter and 2.1mm inner diameter barrel connector, it is widely used in CCTV camera installations, LED lighting, routers, power adapters, and DIY electronics projects. Available in Male and Female variants, this connector features a 2-pin screw terminal that allows wires to be connected easily using a screwdriver. The clearly marked positive (+) and negative (–) terminals help prevent wiring errors, making installation simple for both professionals and hobbyists. Manufactured with a durable ABS plastic housing and nickel-plated metal contacts, this connector provides reliable electrical performance, corrosion resistance, and long service life. Its reusable design makes it ideal for prototyping, repairs, and permanent installations. ⭐ Features Standard 5.5 × 2.1mm DC barrel connector Available in Male and Female versions 2-pin screw terminal for quick wire connection No soldering required Clearly marked positive (+) and negative (–) terminals Supports up to 5A current Durable ABS plastic housing Nickel-plated contacts for improved conductivity Secure and reusable connection Easy plug-and-play installation Suitable for 12V and 24V DC systems Ideal for DIY electronics and repair work 📋 Technical Specifications Product Type: DC Power Jack Plug with Screw Terminal Connector Type: Male / Female Barrel Size: 5.5mm (Outer) × 2.1mm (Inner) Terminal Type: 2-Pin Screw Terminal Rated Voltage: 0–30V DC Recommended Operating Voltage: 12V / 24V DC Maximum Current: Up to 5A Housing Material: ABS Plastic Contact Material: Nickel-Plated Metal Mounting Type: Inline Cable Mount Wire Compatibility: Up to 22 AWG Polarity Marking: Positive (+) / Negative (–) Operating Temperature: -20°C to +80°C 🔧 Applications Suitable for: CCTV Camera Power Connections LED Strip Lighting LED Sign Boards DC Power Adapters Routers and Modems Arduino Projects Raspberry Pi Projects DIY Electronics Battery Packs Power Distribution Systems Industrial Control Equipment Testing and Prototyping Electronic Repairs Low-Voltage DC Power Systems 📦 Package Includes 1 × 5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal (Male or Female variant as selected) ⚠️ Note Please select the required Male or Female connector variant before ordering. Verify polarity before connecting power to avoid damage to connected devices. Suitable for low-voltage DC applications only. Product appearance may vary slightly depending on the manufacturing batch.
110 × 69mm 5V 180mA Mini Solar Panel Cell Module
[Solar Panel] ☀️ 110 × 69mm 5V 180mA Mini Solar Panel Cell Module (0.9W) 5V Output • 180mA Current • 0.9W Power • Polycrystalline Solar Cell • Compact & Lightweight The 110 × 69mm 5V 180mA Mini Solar Panel Cell Module is a compact and efficient photovoltaic module designed to convert sunlight into clean, renewable electrical energy. Delivering a stable 5V output with a maximum current of 180mA, this solar panel is ideal for powering low-power electronic devices, DIY solar projects, battery charging applications, and educational experiments. Built using high-quality polycrystalline silicon solar cells, the module offers efficient energy conversion while maintaining reliable performance under sunlight. Its lightweight construction and compact dimensions make it easy to integrate into portable devices, robotics projects, solar-powered gadgets, and outdoor applications. Designed for durability, the panel features a weather-resistant construction suitable for outdoor use. With pre-drilled mounting holes, installation is quick and convenient for a wide range of renewable energy projects. ⭐ Features High-efficiency polycrystalline solar panel Stable 5V DC output Maximum output current of 180mA Maximum power output of 0.9W Compact size for portable projects Lightweight and easy to install Weather-resistant construction Pre-drilled mounting holes Suitable for outdoor applications Eco-friendly renewable energy source No external power source required Ideal for educational and DIY projects 📋 Technical Specifications Product Type: Mini Solar Panel Cell Module Cell Type: Polycrystalline Silicon Maximum Power Output: 0.9W Output Voltage: 5V DC Maximum Output Current: 180mA Panel Dimensions: 110 × 69 mm Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +85°C Construction: Weather-Resistant Connector: None (Solder Wire Connection) Weight: Approximately 15g 🔧 Applications Suitable for: DIY Solar Projects Solar Battery Chargers Mobile Phone Charging Projects Arduino Projects ESP32 & ESP8266 Projects Raspberry Pi Accessories Robotics Projects Solar Garden Lights Educational Science Experiments IoT Devices Portable Electronic Devices Renewable Energy Demonstrations Emergency Backup Power Projects Small DC Loads 📦 Package Includes 1 × 110 × 69mm 5V 180mA Mini Solar Panel Cell Module ⚠️ Note Output voltage and current depend on sunlight intensity and panel orientation. For battery charging applications, use a suitable solar charge controller or charging module. This panel is intended for low-power applications and may not provide sufficient power under low-light conditions. Product appearance may vary slightly depending on the manufacturing batch.
DHT11 Digital Temperature and Humidity Sensor Module 3.3V-5V for Arduino & Raspberry Pi
[Temperature Sensor] The DHT11 Digital Temperature and Humidity Sensor Module is a reliable and cost-effective sensor designed to measure ambient temperature and relative humidity. It combines a capacitive humidity sensing element and a thermistor with a built-in digital signal processing unit, providing calibrated digital output directly to microcontrollers. In addition, the DHT11 offers stable performance and excellent long-term reliability, making it suitable for environmental monitoring and automation applications. As a result, it is widely used in weather stations, smart home systems, greenhouse monitoring, HVAC systems, and educational electronics projects. Because the module includes the required pull-up resistor, interfacing with microcontrollers becomes simple and straightforward. Furthermore, only three connections are required: VCC, GND, and Data Output. The sensor operates from a wide voltage range of 3.3V to 5.5V DC, ensuring compatibility with Arduino, Raspberry Pi, ESP32, STM32, NodeMCU, and other development boards. Moreover, readily available libraries and example codes allow quick integration into projects. The DHT11 utilizes advanced digital signal acquisition technology and dedicated temperature-humidity sensing techniques to ensure accurate and dependable measurements. 🔹 Key Features Measures temperature and humidity simultaneously Calibrated digital signal output Low power consumption High reliability and long-term stability Capacitive humidity sensing technology Built-in pull-up resistor on module Compatible with Arduino, ESP32, Raspberry Pi, and STM32 Simple 3-wire interface Easy integration into IoT projects Compact and lightweight design 🔹 Technical Specifications Sensor Model: DHT11 Operating Voltage: 3.3V – 5.5V DC Output Type: Digital Serial Output Humidity Measurement Range: 20%RH – 90%RH Humidity Accuracy: ±5%RH Humidity Resolution: 1%RH Temperature Measurement Range: 0°C – 50°C Temperature Accuracy: ±2°C Temperature Resolution: 1°C Sampling Rate: 1Hz (One Reading Per Second) Long-Term Stability: < ±1%RH/Year Interchangeability: Fully Interchangeable Sensor Technology: Capacitive Humidity Sensor + Thermistor 🔹 Pin Configuration Pin 1 (VCC): 3.3V – 5.5V DC Power Supply Pin 2 (DATA): Digital Serial Data Output Pin 3 (GND): Ground 🔹 Applications This sensor module is suitable for: Arduino projects Raspberry Pi projects ESP32 projects IoT systems Weather monitoring stations Smart home automation Greenhouse monitoring HVAC control systems Environmental monitoring Educational electronics projects 🔹 Package Includes 1 × DHT11 Digital Temperature and Humidity Sensor Module
RS-12 Green 2 Pin Mini Rocker Switch – 6A 250V ON/OFF Standard SPDT Plastic Switch
[Mechanical Switches] 🔘 RS-12 Green 2 Pin Mini Rocker Switch 6A 250V ON/OFF Panel Mount Switch Compact Design • 6A Current Rating • Durable Iron Contacts • Reliable Power Switching The RS-12 Green 2 Pin Mini Rocker Switch is a high-quality, compact ON/OFF panel mount switch designed for reliable switching in electrical and electronic applications. Manufactured using durable materials and iron contacts, this rocker switch ensures dependable performance, smooth operation, and long service life. With a 6A @ 250V AC rating, it is suitable for controlling AC or DC power in home appliances, power supplies, battery chargers, DIY electronics, industrial equipment, automation systems, and control panels. Its 2-pin SPST (Single Pole Single Throw) configuration provides simple ON/OFF switching, while the compact snap-in design allows easy installation even in limited panel space. The attractive green rocker actuator offers clear ON/OFF indication, making it easy to identify the switch position. Designed for up to 100,000 mechanical operations, the RS-12 rocker switch is an excellent choice for both professional and hobby electronics projects. ⭐ Features High-quality RS-12 mini rocker switch Compact 2-pin panel mount design Simple ON/OFF switching operation Rated for 6A at 250V AC Durable plastic housing Iron contact terminals Smooth and reliable switching performance Long mechanical life up to 100,000 cycles Easy snap-in installation Suitable for AC and DC switching Ideal for industrial, commercial, and DIY applications 📋 Technical Specifications Product Name: RS-12 Green Mini Rocker Switch Product Type: Rocker Switch Switch Function: ON/OFF Switch Configuration: SPST (Single Pole Single Throw) Number of Pins: 2 Rated Voltage: 250V AC Rated Current: 6A Power Rating: 250V / 6A Terminal Type: Solder Terminals Contact Material: Iron Housing Material: Plastic Illumination: Non-Illuminated Mechanical Life: Up to 100,000 Operations Mounting Type: Panel Mount (Snap-In) Color: Green Rocker with Black Housing Response Time: Instant RoHS Compliance: No 🔧 Applications Suitable for: Home Appliances Power Supplies Battery Chargers DIY Electronics Arduino Projects Raspberry Pi Projects Robotics Industrial Control Panels Automation Equipment Audio Equipment LED Lighting Systems Electronic Toys Test Equipment Consumer Electronics Repair & Maintenance 📦 Package Includes 1 × RS-12 Green 2 Pin Mini Rocker Switch ⚠️ Note Verify the switch rating before connecting high-voltage or high-current loads. Disconnect power before installation or maintenance. Product color, markings, and dimensions may vary slightly depending on the manufacturing batch.
RS-12 Blue 2 Pin Mini Rocker Switch – 6A 250V ON/OFF Standard SPDT Plastic Switch
[Mechanical Switches] 🔵 RS-12 Blue 2 Pin Mini Rocker Switch 6A 250V ON/OFF Panel Mount Switch Compact Design • 6A Current Rating • Durable Iron Contacts • Reliable Power Switching The RS-12 Blue 2 Pin Mini Rocker Switch is a high-quality, compact ON/OFF panel mount switch designed for reliable switching in electrical and electronic applications. Manufactured using durable materials and iron contacts, this rocker switch ensures dependable performance, smooth operation, and long service life. With a 6A @ 250V AC rating, it is suitable for controlling AC or DC power in home appliances, power supplies, battery chargers, DIY electronics, industrial equipment, automation systems, and control panels. Its 2-pin SPST (Single Pole Single Throw) configuration provides simple ON/OFF switching, while the compact snap-in design allows easy installation even in limited panel space. The attractive blue rocker actuator provides clear ON/OFF indication while giving electronic equipment a modern and professional appearance. Designed for up to 100,000 mechanical operations, the RS-12 rocker switch is an excellent choice for both professional and hobby electronics projects. ⭐ Features High-quality RS-12 mini rocker switch Compact 2-pin panel mount design Simple ON/OFF switching operation Rated for 6A at 250V AC Durable plastic housing Iron contact terminals Smooth and reliable switching performance Long mechanical life up to 100,000 cycles Easy snap-in installation Suitable for AC and DC switching Ideal for industrial, commercial, and DIY applications 📋 Technical Specifications Product Name: RS-12 Blue Mini Rocker Switch Product Type: Rocker Switch Switch Function: ON/OFF Switch Configuration: SPST (Single Pole Single Throw) Number of Pins: 2 Rated Voltage: 250V AC Rated Current: 6A Power Rating: 250V / 6A Terminal Type: Solder Terminals Contact Material: Iron Housing Material: Plastic Illumination: Non-Illuminated Mechanical Life: Up to 100,000 Operations Mounting Type: Panel Mount (Snap-In) Color: Blue Rocker with Black Housing Response Time: Instant RoHS Compliance: No 🔧 Applications Suitable for: Home Appliances Power Supplies Battery Chargers DIY Electronics Arduino Projects Raspberry Pi Projects ESP32 Projects Robotics Industrial Control Panels Automation Equipment Audio Equipment LED Lighting Systems Electronic Toys Test Equipment Consumer Electronics Repair & Maintenance 📦 Package Includes 1 × RS-12 Blue 2 Pin Mini Rocker Switch ⚠️ Note Verify the switch rating before connecting high-voltage or high-current loads. Disconnect power before installation or maintenance. Product color, markings, and dimensions may vary slightly depending on the manufacturing batch.
RS-12 Yellow 2 Pin Mini Rocker Switch 6A 250V ON/OFF Standard SPDT Plastic Switch
[Mechanical Switches] 🟡 RS-12 Yellow 2 Pin Mini Rocker Switch 6A 250V ON/OFF Panel Mount Switch Compact Design • 6A Current Rating • Durable Iron Contacts • Reliable Power Switching The RS-12 Yellow 2 Pin Mini Rocker Switch is a high-quality, compact ON/OFF panel mount switch designed for reliable switching in electrical and electronic applications. Manufactured using durable materials and iron contacts, this rocker switch ensures dependable performance, smooth operation, and long service life. With a 6A @ 250V AC rating, it is suitable for controlling AC or DC power in home appliances, power supplies, battery chargers, DIY electronics, industrial equipment, automation systems, and control panels. Its 2-pin SPST (Single Pole Single Throw) configuration provides simple ON/OFF switching, while the compact snap-in design allows easy installation even in limited panel space. The bright yellow rocker actuator provides clear visibility and easy identification of the switch, making it an excellent choice for control panels, machinery, DIY electronics, and industrial equipment. Designed for up to 100,000 mechanical operations, the RS-12 rocker switch delivers reliable performance for long-term use. ⭐ Features High-quality RS-12 mini rocker switch Compact 2-pin panel mount design Simple ON/OFF switching operation Rated for 6A at 250V AC Durable plastic housing Iron contact terminals Smooth and reliable switching performance Long mechanical life up to 100,000 cycles Easy snap-in installation Suitable for AC and DC switching Ideal for industrial, commercial, and DIY applications 📋 Technical Specifications Product Name: RS-12 Yellow Mini Rocker Switch Product Type: Rocker Switch Switch Function: ON/OFF Switch Configuration: SPST (Single Pole Single Throw) Number of Pins: 2 Rated Voltage: 250V AC Rated Current: 6A Power Rating: 250V / 6A Terminal Type: Solder Terminals Contact Material: Iron Housing Material: Plastic Illumination: Non-Illuminated Mechanical Life: Up to 100,000 Operations Mounting Type: Panel Mount (Snap-In) Color: Yellow Rocker with Black Housing Response Time: Instant RoHS Compliance: No 🔧 Applications Suitable for: Home Appliances Power Supplies Battery Chargers DIY Electronics Arduino Projects Raspberry Pi Projects ESP32 Projects Robotics Industrial Control Panels Automation Equipment Audio Equipment LED Lighting Systems Electronic Toys Test Equipment Consumer Electronics Repair & Maintenance 📦 Package Includes 1 × RS-12 Yellow 2 Pin Mini Rocker Switch ⚠️ Note Verify the switch rating before connecting high-voltage or high-current loads. Disconnect power before installation or maintenance. Product color, markings, and dimensions may vary slightly depending on the manufacturing batch.
Out of stock1.3 Inch I2C IIC 128×64 OLED Display Module – White
[LED/LCD Display Module] The 1.3 Inch I2C 128×64 OLED Display Module is a compact, high-contrast display designed for Arduino, ESP32, NodeMCU, Raspberry Pi, and other microcontroller-based projects. This module uses OLED (Organic Light Emitting Diode) technology, providing bright white pixels with excellent contrast and wide viewing angles. Powered by the SSH1106 controller chip, the display offers smooth graphics rendering and reliable performance. With a resolution of 128×64 pixels, it can display text, graphics, icons, and sensor data clearly even in small embedded systems. The module communicates using the I2C (IIC) interface, requiring only 4 pins (VCC, GND, SDA, SCL), which helps save valuable GPIO pins on your microcontroller. It operates within a voltage range of 3.3V to 5V, making it compatible with most development boards. Unlike traditional LCD displays, OLED displays do not require a backlight because each pixel emits its own light. This results in lower power consumption, better contrast, and faster response times. Due to its compact size, lightweight design, and simple wiring, the display module is ideal for IoT devices, sensor monitors, battery indicators, portable electronics, robotics projects, and DIY electronics applications. ⭐ Features 1.3 Inch OLED Display Module 128 × 64 pixel resolution White pixel display SSH1106 display controller I2C / IIC communication interface Requires only 4 pins High contrast and wide viewing angle Low power consumption Compatible with Arduino, ESP32, NodeMCU, Raspberry Pi Ideal for embedded and IoT projects 🔧 Technical Specifications Display Size: 1.3 inch Resolution: 128 × 64 pixels Controller Chip: SSH1106 Display Area: 34.5 × 19 mm Interface Type: IIC / I2C Pixel Color: White Driving Voltage: 3.3V – 5V Operating Temperature: -40°C to 70°C Physical Dimensions Length: 35.5 mm Width: 33.5 mm Height: 4 mm Weight: 7 g 📦 Package Includes 1 × 1.3 Inch 128×64 OLED Display Module (White)
USB Type-A Male Connector Plug (Solder Type) – DIY USB 2.0 Charging & Data Cable Connector
[USB Socket] 📖 Product Description Build your own USB cables easily with this USB Type-A male connector plug.It’s perfect for DIY cable making, USB repairs, and electronic projects.This connector features a strong nickel-plated metal shell, 4 solder pins, and a standard USB 2.0 interface for reliable performance in both power and data transmission. Use it to repair broken cables, create custom USB extensions, or prototype devices that connect to any USB-compatible port (like power banks, chargers, Arduino boards, and embedded systems). Please check our others items: Click Here ⚙️ Key Features ✅ Standard USB Type-A male plug – fits all USB 2.0 Type-A ports ✅ DIY solder type design – easy to connect wires securely ✅ Durable metal housing – ensures longevity and protection ✅ Stable power & data transfer – ideal for charging and communication ✅ Perfect for makers, technicians, and electronic enthusiasts 📐 Technical Specifications Specification Details Connector Type USB Type-A Male Interface Standard USB 2.0 Pin Count 4 Pins Mount Type Cable / Solder Type Shell Material Nickel-Plated Metal Insulator Material High-Temperature Plastic Color Silver with White Insulator Rated Voltage 5V DC Rated Current Up to 2A Operating Temperature −20 °C to +70 °C Dimensions Approx. 20 mm × 18 mm × 4.5 mm Weight Approx. 2 g 💡 Applications DIY USB charging cables Custom USB extension cables USB data and power projects Embedded systems, Arduino, Raspberry Pi Replacement connector for broken USB plugs 📦 Package Includes 1 × USB Type-A Male Connector Plug (Solder Type)
Type-C MT3608 Adjustable Dc to Dc Converter 2-24V to 5V-28V 2A
[Step UP Buck Converter] DC-DC Adjustable Boost Power Supply Module 2V–24V to 5V/9V/12V/28V 2A Type-C The DC-DC Adjustable Boost Power Supply Module is a compact step-up power conversion module designed to increase a lower DC input voltage to a higher adjustable output voltage. It supports a wide 2V–24V input range and provides an adjustable output from approximately 5V to 28V, making it suitable for battery-powered devices, microcontrollers, sensors, portable electronics and DIY power projects. With a compact 30 × 17 × 8mm design and Type-C connector, this module is convenient for projects where space and flexible power input are important. ⭐ Key Features DC-DC boost/step-up converter Wide 2V–24V input voltage range Adjustable output voltage Output options include approximately 5V, 9V, 12V and 28V Maximum output current: 2A Conversion efficiency: >93% Compact and lightweight design Type-C input connector Suitable for battery-powered applications Easy to integrate into DIY electronics projects 📋 Technical Specifications Product Type: DC-DC Boost Converter Module Input Voltage: 2V–24V DC Output Voltage: 5V–28V adjustable Maximum Output Current: 2A Peak Output Current: Up to 2A Efficiency: >93% Input Connector: USB Type-C Product Size: 30 × 17 × 8mm Weight: Approximately 4g Condition: New 🔧 Applications Arduino and microcontroller projects Raspberry Pi and electronic development projects Battery-powered devices Portable power systems GPS and sensor projects LED applications Robotics projects Motors and actuators DIY power supplies Low-voltage to higher-voltage power conversion Portable electronic equipment 🛠️ How It Works This module uses a DC-DC boost conversion circuit to increase the input DC voltage. For example: 3.7V battery → 5V output 5V input → 9V output 5V/12V input → higher adjustable output The required output voltage can be adjusted according to the application. ⚠️ Important Notes This is a boost/step-up module; the output voltage cannot be lower than the applicable input voltage range. Do not exceed the specified 24V maximum input voltage. Do not exceed the 2A maximum output current. Actual maximum output power depends on input voltage, output voltage, cooling and module operating conditions. At higher output power, adequate ventilation/cooling may be required. Always verify the output voltage with a multimeter before connecting sensitive electronics. Do not short-circuit the output. The module does not automatically regulate to 5V/9V/12V/28V; the output must be set to the required voltage. 📦 Package Includes 1 × DC-DC Adjustable Boost Module 2V–24V to 5V/9V/12V/28V, 2A, Type-C
5V 2.4A Lithium Battery Digital Display Charging Module with Dual USB Power Bank Module
[Lithium Battery Protection Board] Dual USB Output • LED Battery Display • Built-in Protection • DIY Power Bank Module The Dual USB 5V Power Bank Charging Module is a compact and feature-rich charging and protection board designed for building custom power banks using 3.7V Lithium-Ion or Lithium Polymer batteries. Supporting both USB Type-C and Micro USB charging inputs, the module provides convenient charging compatibility while delivering stable 5V output through dual USB ports. Equipped with an intelligent boost converter, the module efficiently converts the battery voltage (3.0V–4.2V) into a regulated 5V output with a maximum output current of 2.4A, making it suitable for charging smartphones, tablets, Bluetooth devices, smartwatches, and other USB-powered electronics. The onboard digital LED display shows the battery level from 0% to 100% in real time and also indicates charging (IN) and discharging (OUT) status, allowing users to easily monitor battery capacity. Designed with multiple safety features including overcharge, over-discharge, over-current, short-circuit, and constant current protection, this module ensures safe and reliable operation. It also includes dedicated LED terminals for adding a flashlight, making it an ideal solution for DIY portable power bank project Note: This module is designed for single-cell (1S) 3.7V Lithium-Ion/Li-Po batteries connected in parallel only. Do not connect batteries in series, as doing so may permanently damage the module. ⭐ Features Supports USB Type-C and Micro USB charging input Dual USB output ports for charging two devices simultaneously Maximum output current up to 2.4A Intelligent 5V boost converter Real-time LED battery percentage display (0–100%) Charging and output status indicators Built-in flashlight LED connection High conversion efficiency Multiple protection circuits for safe operation Compact PCB design for DIY power bank projects 📋 Technical Specifications Product Type: Power Bank Charging & Protection Module Battery Type: Single Cell (1S) Lithium-Ion / Lithium Polymer Battery Voltage: 3.0V–4.2V DC Charging Input: USB Type-C & Micro USB Input Voltage: 5V DC USB Output Ports: 2 Output Voltage: 5V DC Maximum Output Current: 2.4A Display Type: Digital LED Battery Percentage Display Battery Indicator: 0–100% Status Indicators: Charging (IN) / Output (OUT) Protection Functions: Overcharge Protection Over-discharge Protection Over-current Protection Short Circuit Protection Constant Current Charging LED Flashlight Output: Supported Module Dimensions: Approx. 65 × 25 × 10 mm 🔧 Applications Suitable for: DIY Power Banks 18650 Battery Packs Lithium Battery Projects Portable USB Chargers Emergency Power Supplies Mobile Phone Chargers Bluetooth Speaker Power Banks Raspberry Pi Power Supply Arduino Projects Portable Electronics DIY Electronics Battery Backup Systems 📦 Package Includes 1 × Dual USB 5V Type-C & Micro USB Power Bank Charging Module with LED Display ⚠️ Important Notes Connect the battery correctly: B+ to battery positive and B- to battery negative. Incorrect battery polarity may permanently damage the module. Use 3.7V Lithium-Ion or Li-Po batteries only. If using multiple cells, connect them only in parallel. Do not connect batteries in series, as this may cause overheating and permanent module failure. Quick Charge performance depends on the connected device, charging cable, charger, and battery quality.
High Quality Ultra Flexible 18AWG Silicone Wire 1m (Red) + 1m (Black)
[Silicon Wire] The High-Quality 18AWG Silicone Wire 1m (Red) + 1m (Black) pair has a pretty big diameter as compared to the normal 18AWG wire used in RC projects for serving its specific purpose. This wire has low resistance and high current carrying capacity. These are also used in LiPO batteries to deliver power to ESC’s. Ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. The wire is the first priority tool for carrying current from one circuit to other while their current carrying capacity is dependent upon the size of the wire. So the High Quality 18AWG Silicone Wire 1m (Red) + 1m (Black) both has the considerable diameter to suit your application. Please find out our more cable and wires. Click here Wires with the wide variety of silicon wire gauges and colors to suit your applications are available The 18AWG High Temperature Silicone Wire is a premium-quality flexible electrical cable designed for low to medium current applications requiring excellent flexibility and high-temperature resistance. Manufactured using high-purity tinned copper conductors with soft silicone rubber insulation, this wire provides outstanding electrical conductivity, corrosion resistance, and long service life. Rated for 600V and capable of operating continuously at temperatures up to 200°C, this silicone wire is suitable for battery packs, RC models, drones, LED lighting, robotics, power supplies, automotive wiring, solar systems, and DIY electronic projects. The tinned copper conductor ensures efficient current transfer with minimal voltage drop while resisting oxidation and corrosion. Its ultra-flexible silicone insulation allows easy routing through tight spaces and provides excellent durability in demanding environments. This package includes 1 meter of Red wire and 1 meter of Black wire, making it ideal for positive and negative wiring in electronic and electrical applications. ⭐ Features Premium 18AWG silicone insulated wire High-purity tinned copper conductor Ultra-flexible silicone insulation Rated for 600V operation Heat resistant up to 200°C Excellent electrical conductivity Corrosion-resistant tinned copper strands Easy to strip, solder, and terminate Soft, durable, and wear-resistant insulation Suitable for indoor and outdoor applications 📋 Technical Specifications Product Type: High Temperature Silicone Wire Wire Gauge: 18 AWG Conductor Material: Tinned Copper Insulation Material: High Temperature Silicone Rubber Rated Voltage: 600V Rated Temperature: 200°C Rated Current: 8A (Typical) Wire Type: Flexible Multi-Strand Marking: 18AWG 600V 200°C Wire Color: Red & Black Length: 1 Meter Red + 1 Meter Black (Total 2 Meters) 🔧 Applications Suitable for: Lithium Battery Packs RC Cars & RC Boats FPV Drones Model Aircraft Solar Power Systems LED Lighting Power Supplies Robotics Projects Arduino Projects ESP32 Projects Raspberry Pi Projects Automotive Wiring Electric Scooters & E-Bikes DIY Electronics Laboratory Equipment Industrial Control Panels 📦 Package Includes 1 × 18AWG High Temperature Silicone Wire – Red (1 Meter) 1 × 18AWG High Temperature Silicone Wire – Black (1 Meter)
Out of stock2.8 inch SPI Touch Screen Module TFT Interface 240*320
[LED/LCD Display Module] This TFT display is big (2.8″ diagonal) bright and colorful! 240×320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128×64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen. This display has a controller built into it with RAM buffering so that almost no work is done by the microcontroller. The display can be used in two modes: 8-bit and SPI. For 8-bit mode, you’ll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 lines total). SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and d/c) but is slower than the 8-bit mode. In addition, 4 pins are required for the touchscreen (2 digital, 2 analogs). This 2.8 inch SPI Touch Screen Module is wrapped up into an easy-to-use breakout board, with SPI connections on one end and 8-bit on the other. Both are 3-5V compliant with high-speed level shifters so you can use with any microcontroller. If you’re going with SPI mode, you can also take advantage of the onboard MicroSD card socket to display images. Stock version: 1.1V For more displays click below, LED/LCD Display Features : It shows the color depth of 262K/65K. Need at least 4 IOs from your MCU The display has a wide viewing angle. Big display with good resolution. Package Includes : 1 x 2.8-inch SPI Touch Screen Module TFT Interface 240 x 320 1 x Stylus Pen Buy other components to attach to this LCD Display Arduino Boards Raspberry Pi Dupont Cables
315MHz 4 Channel Wireless RF Remote Control Kit with Receiver Module (Non-Locking Mode)
[RF Module] 📡 315MHz 4 Channel Wireless RF Remote Control Kit with Receiver Module (Non-Locking Mode) 4 Channel RF Remote • 315MHz ASK Communication • 5V Receiver • Non-Locking Mode • Long Range Wireless Control The 315MHz 4 Channel Wireless RF Remote Control Kit is a reliable wireless control solution consisting of a 4-button RF transmitter and a super regenerative ASK receiver module. Operating at 315MHz, this kit is ideal for remote switching, automation, robotics, security systems, and DIY wireless control projects. The receiver module features four independent digital outputs (D0–D3) that correspond to the four buttons on the transmitter. When a button is pressed, the respective output pin goes HIGH, returning LOW immediately after the button is released. This Non-Locking (Momentary/Jog) operation makes the module perfect for applications requiring temporary switching such as electric door control, motor jogging, relay activation, and microcontroller interfacing. The receiver operates from a 5V DC supply and features a high-sensitivity ASK receiver with a Valid Transmission (VT) output pin for reliable signal detection. The transmitter uses a fixed-code encoder for secure communication and easy operation. Ideal for Arduino, ESP32, Raspberry Pi, AVR, PIC, industrial automation, wireless switching, and educational electronics projects. ⭐ Features 4-channel wireless RF remote control kit Operating frequency: 315MHz ASK (Amplitude Shift Keying) modulation Fixed-code RF transmitter Non-Locking (Momentary/Jog) operating mode Four independent digital outputs (D0–D3) High-sensitivity super regenerative receiver 5V DC receiver operating voltage VT (Valid Transmission) status output Compact PCB design Easy interface with microcontrollers Long wireless transmission range (environment dependent) Suitable for DIY and industrial automation 📋 Technical Specifications RF Transmitter Product Type: RF Wireless Remote Control Operating Frequency: 315MHz Number of Buttons: 4 Channels: 4 Modulation: ASK (Amplitude Shift Keying) Encoding Type: Fixed Code Operating Mode: Non-Locking (Momentary) Power Supply: 12V A23 Battery (Not Included) RF Receiver Module Operating Voltage: 5V DC Operating Frequency: 315MHz Receiver Type: Super Regenerative ASK Receiver Receiver Sensitivity: -98dBm Output Channels: D0, D1, D2, D3 VT Output: Yes (Valid Signal Output) Antenna Connection: External ANT Pin Recommended Antenna Length: Approx. 17cm (Quarter-Wave) Module Dimensions: Approx. 41 × 22 × 7 mm Receiver Pin Configuration VT – Valid Signal Output D3 – Channel 4 Output D2 – Channel 3 Output D1 – Channel 2 Output D0 – Channel 1 Output +5V – Power Input GND – Ground ANT – External Antenna Connection 🔧 Operating Modes Non-Locking (Momentary/Jog Mode) Press a button → Corresponding output goes HIGH. Release the button → Output immediately returns LOW. Ideal for momentary control applications. Note: This product is supplied in Non-Locking Mode only. 🔧 Applications Suitable for: Arduino Projects ESP32 Projects Raspberry Pi Projects Wireless Relay Control Home Automation Industrial Automation Remote Door Control Electric Door Locks Wireless Switching Robotics Motor Control Lighting Control Alarm Systems Security Systems DIY Electronics Educational Projects 📦 Package Includes 1 × 4-Button 315MHz RF Wireless Remote Control 1 × 315MHz Super Regenerative Receiver Module ⚠️ Note Battery is included. A 12V A23 battery is required for operation. Avoid bending or touching the receiver's onboard inductor (copper coil), as this may affect receiver sensitivity. Wireless operating range depends on antenna quality, obstacles, and surrounding RF interference. Product appearance may vary slightly depending on the manufacturing batch.
High Quality Ultra Flexible 16AWG Silicone Wire 1m (Red) + 1m (Black)
[Silicon Wire] The High-Quality 16AWG Silicone Wire 1m (Red) + 1m (Black) pair has a pretty big diameter as compared to the normal 20AWG wire used in RC projects for serving its specific purpose. This wire has low resistance and high current carrying capacity. These are also used in LiPO batteries to deliver power to ESC’s. Ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. The wire is the first priority tool for carrying current from one circuit to other while their current carrying capacity is dependent upon the size of the wire. So the High Quality 16AWG Silicone Wire 1m (Red) + 1m (Black) both has the considerable diameter to suit your application. Please find out our more cable and wires. Click here Wires with the wide variety of silicon wire gauges and colors to suit your applications are available The 16AWG High Temperature Silicone Wire is a premium-quality flexible electrical cable designed for high-current and high-temperature applications. Manufactured using high-purity tinned copper conductors with soft silicone rubber insulation, this wire offers excellent flexibility, superior electrical conductivity, and outstanding resistance to heat, moisture, chemicals, and aging. Rated for 600V and capable of operating at temperatures up to 200°C, this silicone wire is ideal for battery packs, RC models, drones, solar power systems, automotive wiring, LED lighting, power supplies, robotics, and various industrial and DIY electronic projects. The tinned copper conductor provides low resistance and excellent corrosion protection, ensuring efficient power transmission and long service life. Its ultra-flexible silicone insulation allows easy routing and installation, even in confined spaces or moving applications. This package includes 1 meter of Red wire and 1 meter of Black wire, making it perfect for positive and negative wiring in electronic and electrical projects. ⭐ Features Premium 16AWG silicone insulated wire High-purity tinned copper conductor Ultra-flexible silicone insulation Rated for 600V operation Heat resistant up to 200°C High current carrying capacity Excellent corrosion resistance Easy to strip, solder, and terminate Soft and durable construction Suitable for indoor and outdoor applications 📋 Technical Specifications Product Type: High Temperature Silicone Wire Wire Gauge: 16 AWG Conductor Material: Tinned Copper Insulation Material: High Temperature Silicone Rubber Rated Voltage: 600V Rated Temperature: 200°C Rated Current: 12.5A Wire Type: Flexible Multi-Strand Marking: 16AWG 600V 200°C Wire Color: Red & Black Length: 1 Meter Red + 1 Meter Black (Total 2 Meters) 🔧 Applications Suitable for: Lithium Battery Packs RC Cars & RC Boats FPV Drones Model Aircraft Solar Power Systems LED Lighting Power Supplies Robotics Projects Arduino Projects ESP32 Projects Raspberry Pi Projects Automotive Wiring Electric Bicycles & Scooters DIY Electronics Laboratory Equipment Industrial Control Panels 📦 Package Includes 1 × 16AWG High Temperature Silicone Wire – Red (1 Meter) 1 × 16AWG High Temperature Silicone Wire – Black (1 Meter)
Micro 130 DC Motor 3V-6V High Speed Brushed DC Motor (9000–13000 RPM)
[General DC Motor] The Micro 130 DC Motor is a compact, lightweight, and high-performance brushed DC motor widely used in hobby electronics, robotics, educational kits, and battery-powered devices. Operating on 3V to 6V DC, it delivers a no-load speed of 9,000–13,000 RPM, making it suitable for applications requiring high-speed rotary motion in a compact form factor. Designed with a durable metal housing and a precision 2mm output shaft, this motor provides smooth operation, stable performance, and excellent reliability. Its compact dimensions make it easy to integrate into small electronic projects where space is limited. The motor can be easily connected to Arduino, Raspberry Pi, ESP32, motor driver modules, and other microcontroller platforms, making it an excellent choice for beginners, students, hobbyists, and professionals. Whether you're building a robot, smart car, mini fan, science experiment, or replacing a toy motor, the Micro 130 DC Motor offers dependable performance and long service life. ⭐ Features Compact and lightweight Micro 130 brushed DC motor Operating voltage from 3V to 6V DC High-speed operation up to 13,000 RPM Durable metal housing for long service life Precision 2mm output shaft Smooth and stable performance Low power consumption Easy two-wire connection Supports clockwise and counter-clockwise rotation Ideal for battery-powered applications Perfect for DIY electronics, robotics, and educational projects 📋 Technical Specifications Product Type: Brushed DC Motor Model: Micro 130 Operating Voltage: 3V – 6V DC Motor Speed: 9,000–13,000 RPM (No Load) Motor Type: Brushed DC No Load Current: 0.5A – 0.9A Shaft Diameter: 2mm Shaft Length: 8mm Rotation Direction: Clockwise (CW) / Counter-Clockwise (CCW) by reversing supply polarity Terminal Type: Solder Tabs Housing Material: Metal Weight: Approx. 18g 🔧 Applications The Micro 130 DC Motor is suitable for a wide range of applications, including: Robotics Projects Arduino Projects Raspberry Pi Projects ESP32 Projects RC Cars Toy Vehicles DIY Electronics Mini Cooling Fans Small Water Pumps Educational STEM Kits Science Experiments Battery-Operated Devices Automation Projects Prototype Development Hobby Electronics 📦 Package Includes 1 × Micro 130 DC Motor (3V–6V)Note: Product images are for reference only. The actual product may differ slightly due to manufacturing revisions or supplier changes. For bulk purchases, we recommend ordering a sample first or contacting customer support to verify the latest product images and specifications.
TowerPro Metal Gear MG90S Mini Digital Servo Motor (180° Rotation)
[Servo Motor] ⚙️ TowerPro MG90S Mini Digital Metal Gear Servo Motor (180°) Metal Gear • Digital Servo • 180° Rotation • High Precision • Ideal for RC & Robotics The TowerPro MG90S Mini Digital Servo Motor is a compact, high-performance 9g metal gear servo designed for precise position control in robotics, RC models, automation, and DIY electronics projects. Equipped with all-metal gears, a digital control circuit, and high positioning accuracy, the MG90S offers greater durability, faster response, and higher torque than standard plastic gear servos. Operating from 4.8V to 6.0V DC, the servo delivers a stall torque of up to 2.2 kg·cm and a rotation angle of approximately 180°, making it ideal for robotic arms, pan-tilt camera systems, RC airplanes, RC cars, boats, educational kits, and embedded control applications. The standard 3-wire JR/Futaba-compatible connector allows direct interfacing with Arduino, ESP32, Raspberry Pi, STM32, and most RC receivers. Its lightweight design, compact dimensions, and excellent holding torque make the MG90S one of the most popular micro servos for hobbyists, students, and professionals alike. ⭐ Features Genuine TowerPro MG90S digital servo Durable all-metal gear transmission Approximate 180° rotation angle High positioning accuracy Fast control response High holding torque Smooth and quiet operation Lightweight and compact design Standard 3-wire servo interface Compatible with Arduino, ESP32, Raspberry Pi and RC receivers Ideal for robotics, RC models and automation projects 📋 Technical Specifications Product Type: Mini Digital Servo Motor Brand: TowerPro Model: MG90S Gear Type: Metal Gear Rotation Angle: Approximately 180° Operating Voltage: 4.8V–6.0V DC Stall Torque: 1.8 kg·cm @ 4.8V 2.2 kg·cm @ 6.0V Operating Speed: 0.10 sec/60° @ 4.8V 0.08 sec/60° @ 6.0V Control Signal: PWM (50Hz Standard Servo Signal) Dead Band Width: 1µs Connector Type: JR / Futaba Compatible Cable Length: Approximately 25cm Dimensions: 22.8 × 12.2 × 28.5 mm Weight: Approximately 13.4g Operating Temperature: 0°C to +55°C These specifications are consistent with the manufacturer's published specifications. 🔧 Applications Suitable for: Arduino Projects ESP32 Projects Raspberry Pi Projects Robotic Arms Humanoid Robots RC Airplanes RC Cars RC Boats Pan-Tilt Camera Systems Automatic Door Mechanisms DIY Electronics Educational Robotics Smart Automation Projects Mechatronics Projects 📦 Package Includes 1 × TowerPro MG90S Mini Digital Servo Motor 1 × Servo Horn Set Single Arm Horn Double Arm Horn Four Arm Horn 1 × Mounting Screw Set ⚠️ Note Operate the servo only within the recommended 4.8V–6.0V DC supply range. For stable operation, use an external regulated power supply when driving the servo from microcontrollers. Product appearance, cable color, or accessories may vary slightly depending on the manufacturing batch. Counterfeit MG90S servos are common in the market. Purchase from trusted suppliers for genuine performance.
Stepper Motor(28YBJ-48) with SMD ULN2003 Driver Board
[Servo Motor] The 28BYJ-48 Stepper Motor with ULN2003 Driver Board is a compact, reliable, and low-cost 5V geared stepper motor kit designed for Arduino, robotics, automation, and embedded control applications. This motor features a 4-phase, 5-wire configuration with an integrated reduction gearbox, delivering high torque and precise positioning at low speeds. One of the biggest advantages of a stepper motor is its ability to operate accurately in an open-loop control system, eliminating the need for expensive feedback sensors or encoders. The motor position is precisely controlled by simply counting the input step pulses. The included ULN2003 driver board acts as a signal amplifier, allowing low-power control signals from microcontrollers such as Arduino, Raspberry Pi, ESP32, and 8051 to safely drive the stepper motor. The driver board also features four LED indicators (A, B, C, D) that display the working status of each phase in real time, making testing and debugging easy. With its compact size, plug-and-play connector, stable operation, and high reliability, this stepper motor kit is ideal for robot arms, CNC projects, camera sliders, 3D mechanisms, automation systems, and educational electronics projects. ⭐ KEY FEATURES ✔ 28BYJ-48 Mini Geared Stepper Motor – 5V DC✔ 4-Phase, 5-Wire Configuration✔ Includes ULN2003 Stepper Motor Driver Board✔ Open-Loop Precise Control – No encoder required✔ Built-in Gear Reduction for Higher Torque✔ Plug-and-Play Interface – Easy connection✔ Phase LED Indicators on driver board✔ Compact size, lightweight & reliable✔ Perfect for Arduino, robotics & automation projects 🔧 TECHNICAL SPECIFICATIONS Stepper Motor Model: 28BYJ-48 Supply Voltage: 5V DC (commonly used version) Number of Phases: 4 Wires: 5 Stride Angle: 5.625° × 1/64 (with gearbox) Gear Reduction Ratio: 1:64 (approx.) Dimensions: 44 × 44 × 28 mm (L × B × H) Type: Geared Stepper Motor Driver Board Driver Model: ULN2003 Input Interface: Standard 5-pin connector Indicators: 4 Phase LED status indicators Function: Signal amplification & motor driving 🎯 APPLICATIONS Arduino & microcontroller projects Robotics & automation systems Camera sliders & pan-tilt systems CNC & 3D motion mechanisms Educational electronics kits Smart home & IoT projects 📦 PACKAGE INCLUDES 1 × 28BYJ-48 5V Stepper Motor 1 × ULN2003 Stepper Motor Driver Board
DS3231 RTC Memory Module Precise Real Time Clock I2C-AT24C32
[Clock Module] The DS3231 RTC Real Time Clock Module is a precision timing module designed to provide accurate date and time information even when the main system power is unavailable. It features the highly accurate DS3231 RTC IC along with an onboard AT24C32 EEPROM memory chip for storing user data. In addition, the module includes a built-in temperature-compensated crystal oscillator (TCXO), which significantly improves timekeeping accuracy compared to conventional RTC modules. As a result, it offers excellent long-term stability with minimal drift. Because of its battery backup capability, the RTC continues to maintain accurate time and calendar information during power outages. Furthermore, the module automatically manages switching between the main power source and backup battery. The onboard AT24C32 EEPROM provides non-volatile storage for user settings, calibration values, and project data. Moreover, the module communicates through the standard I2C interface, making integration simple with Arduino, Raspberry Pi, ESP32, STM32, NodeMCU, and other microcontroller platforms. The DS3231 keeps track of seconds, minutes, hours, day, date, month, and year while automatically compensating for leap years up to the year 2100. ⚠️ Note: CR2032 backup battery is not included. 🔹 Key Features High-accuracy DS3231 RTC IC Built-in temperature-compensated crystal oscillator (TCXO) Integrated AT24C32 EEPROM memory Battery backup support Automatic leap-year compensation Two programmable alarms Programmable square-wave output Digital temperature sensor output I2C communication interface Low power consumption Excellent long-term timekeeping stability Compatible with Arduino, ESP32, Raspberry Pi, and STM32 🔹 Technical Specifications RTC IC: DS3231 EEPROM IC: AT24C32 Communication Protocol: I2C Operating Voltage: 3.3V – 5V DC Time Format: 12-Hour / 24-Hour Calendar Support: Day, Date, Month, Year Leap Year Compensation: Valid Up To 2100 Alarm Functions: 2 Programmable Alarms Square Wave Output: Programmable Temperature Sensor Accuracy: ±3°C Backup Battery: CR2032 (Not Included) Data Storage: 32Kb EEPROM (AT24C32) Low Power Operation: Yes 🔹 Pin Configuration VCC – Power Supply (3.3V – 5V) GND – Ground SDA – I2C Data Line SCL – I2C Clock Line Arduino UNO Connection SDA → A4 SCL → A5 VCC → 5V GND → GND 🔹 Applications This RTC module is suitable for: Arduino projects Raspberry Pi projects ESP32 projects Data loggers Digital clocks IoT systems Automation systems Time-stamped monitoring systems Industrial controllers Embedded electronics projects 🔹 Package Includes 1 × DS3231 RTC Real Time Clock Module with AT24C32 EEPROM
6A 250V AC red color copper 2 pins SPST small plastic rocker switches
[Mechanical Switches] 🔴 RS-12 Red 2 Pin Mini Rocker Switch 6A 250V ON/OFF Panel Mount Switch Compact Design • 6A Current Rating • Copper Contacts • Reliable Power Switching The RS-12 Red 2 Pin Mini Rocker Switch is a premium-quality, compact ON/OFF panel mount switch designed for reliable switching in electrical and electronic applications. Manufactured using durable materials and copper contacts, this rocker switch provides excellent electrical conductivity, low contact resistance, and long-lasting performance. Rated for 6A at 250V AC, it is ideal for controlling AC and DC power in home appliances, power supplies, battery chargers, DIY electronics, industrial equipment, automation systems, and control panels. Its 2-pin SPST (Single Pole Single Throw) configuration offers simple ON/OFF switching, while the compact snap-in design allows easy installation in limited panel space. The bright red rocker actuator provides clear ON/OFF identification and gives equipment a modern, professional appearance. With a mechanical life of up to 100,000 operations, the RS-12 rocker switch is suitable for both commercial and hobby applications. ⭐ Features Premium-quality RS-12 mini rocker switch Compact 2-pin panel mount design Simple ON/OFF switching operation Rated for 6A at 250V AC Durable plastic housing Copper contacts for excellent conductivity Low contact resistance Smooth and reliable switching performance Long mechanical life up to 100,000 cycles Easy snap-in installation Suitable for AC and DC switching Ideal for industrial, commercial, and DIY applications 📋 Technical Specifications Product Name: RS-12 Red Mini Rocker Switch Product Type: Rocker Switch Switch Function: ON/OFF Switch Configuration: SPST (Single Pole Single Throw) Number of Pins: 2 Rated Voltage: 250V AC Rated Current: 6A Power Rating: 250V / 6A Terminal Type: Solder Terminals Contact Material: Copper Housing Material: Plastic Illumination: Non-Illuminated Mechanical Life: Up to 100,000 Operations Mounting Type: Panel Mount (Snap-In) Color: Red Rocker with Black Housing Response Time: Instant RoHS Compliance: No 🔧 Applications Suitable for: Home Appliances Power Supplies Battery Chargers DIY Electronics Arduino Projects Raspberry Pi Projects ESP32 Projects Robotics Industrial Control Panels Automation Equipment Audio Equipment LED Lighting Systems Electronic Toys Test Equipment Consumer Electronics Repair & Maintenance 📦 Package Includes 1 × RS-12 Red 2 Pin Mini Rocker Switch ⚠️ Note Ensure the switch rating matches your application before installation. Disconnect power before wiring or servicing the switch. Product appearance and markings may vary slightly depending on the manufacturing batch.