All products · 22 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Out of stockCorsair 5000D AIRFLOW
Mid-tower ATX, dual-chamber, RapidRoute cable management. Premium airflow.
Out of stockMSI MAG 274QRF QD 27" 1440p Rapid IPS 170Hz
27" QHD Rapid IPS w/ Quantum Dot, 170Hz, 1ms GtG.
802580 LiPo Battery 700mAh 3.7V High Discharge 25c for Drone
[LiPo Cell] LiPo Battery 700mAh 3.7V High Discharge 802580 3.7V Lithium Polymer Battery • 700mAh Capacity • 25C High Discharge • 802580 Cell • Molex 2.0mm 2-Pin Connector The LiPo Battery 700mAh 3.7V High Discharge 802580 is a compact and lightweight Lithium Polymer (LiPo) rechargeable battery designed for applications that require high current output in a small form factor. Built with high-quality lithium polymer cells, this battery delivers a nominal voltage of 3.7V and a 700mAh capacity, making it ideal for RC toys, drones, mini helicopters, robotics, wireless electronics, and DIY projects. With a 25C continuous discharge rating, this battery can provide rapid bursts of current for motors and other high-power devices. The battery comes with a Molex 2.0mm 2-pin connector and an integrated protection PCB, offering added safety during charging and discharging. The 802580 cell size refers to the approximate dimensions of 8.0 × 25 × 80 mm, allowing the battery to fit easily into compact electronic devices while maintaining excellent power-to-weight performance. Note: This battery is intended for high-discharge applications such as RC models and robotics. It is not recommended for long-duration low-current devices such as cameras or data loggers. ⭐ Features High-quality 3.7V 700mAh LiPo battery 25C continuous discharge capability Compact 802580 cell size Lightweight design Stable voltage output Built-in protection circuit (PCB) Pre-installed Molex 2.0mm 2-pin connector Excellent power-to-weight ratio Rechargeable and reusable Suitable for high-current applications Easy plug-and-play installation 📋 Technical Specifications Product Type: Rechargeable Lithium Polymer (LiPo) Battery Battery Chemistry: Lithium Polymer (Li-ion Polymer) Cell Size: 802580 Nominal Voltage: 3.7V Full Charge Voltage: 4.20V Typical Capacity: 700mAh Discharge Rating: 25C Continuous Dimensions: Approx. 8.0 × 25 × 80 mm Weight: Approx. 18g Connector Type: Molex 2.0mm 2-Pin Protection Circuit: Built-in PCB Protection Rechargeable: Yes 🔧 Applications Suitable for: RC Cars RC Airplanes RC Helicopters Drones & Quadcopters Robotics Projects Arduino Projects ESP32 Projects DIY Electronics Portable Devices Wireless Modules Educational Projects Electronic Prototyping Battery Replacement Projects Miniature Electronics 📦 Package Includes 1 × LiPo Battery 700mAh 3.7V High Discharge 802580 with Molex 2.0mm 2-Pin Connector ⚠️ Safety Instructions Use only LiPo-compatible chargers. Do not charge above 4.20V. Do not discharge below the recommended cut-off voltage. Do not short-circuit the battery terminals. Do not puncture, crush, or expose the battery to fire. Store partially charged in a cool, dry place when not in use. Ensure connector polarity matches your device before connection.
702035 LiPo Battery 400mAh 3.7V High Discharge 25C For Drone
[LiPo Cell] LiPo Battery 400mAh 3.7V High Discharge 702035 3.7V Lithium Polymer Battery • 400mAh Capacity • 25C High Discharge • 702035 Cell • Molex 2.0mm 2-Pin Connector The LiPo Battery 400mAh 3.7V High Discharge 702035 is a compact and lightweight Lithium Polymer (LiPo) rechargeable battery designed for applications that require high current output in a small form factor. Built with high-quality lithium polymer cells, this battery delivers a nominal voltage of 3.7V and a 400mAh capacity, making it ideal for RC toys, drones, mini helicopters, robotics, wireless electronics, and DIY projects. With a 25C continuous discharge rating, this battery can provide rapid bursts of current for motors and other high-power devices. The battery comes with a Molex 2.0mm 2-pin connector and an integrated protection PCB, offering added safety during charging and discharging. The 702035 cell size refers to the approximate dimensions of 7.0 × 20 × 35 mm, allowing the battery to fit easily into compact electronic devices while maintaining excellent power-to-weight performance. Note: This battery is intended for high-discharge applications such as RC models and robotics. It is not recommended for long-duration low-current devices such as cameras or data loggers. ⭐ Features High-quality 3.7V 400mAh LiPo battery 25C continuous discharge capability Compact 702035 cell size Lightweight design Stable voltage output Built-in protection circuit (PCB) Pre-installed Molex 2.0mm 2-pin connector Excellent power-to-weight ratio Rechargeable and reusable Suitable for high-current applications Easy plug-and-play installation 📋 Technical Specifications Product Type: Rechargeable Lithium Polymer (LiPo) Battery Battery Chemistry: Lithium Polymer (Li-ion Polymer) Cell Size: 702035 Nominal Voltage: 3.7V Full Charge Voltage: 4.20V Typical Capacity: 400mAh Discharge Rating: 25C Continuous Dimensions: Approx. 7.0 × 20 × 35 mm Weight: Approx. 12g Connector Type: Molex 2.0mm 2-Pin Protection Circuit: Built-in PCB Protection Rechargeable: Yes 🔧 Applications Suitable for: RC Cars RC Airplanes RC Helicopters Drones & Quadcopters Robotics Projects Arduino Projects ESP32 Projects DIY Electronics Portable Devices Wireless Modules Educational Projects Electronic Prototyping Battery Replacement Projects Miniature Electronics 📦 Package Includes 1 × LiPo Battery 400mAh 3.7V High Discharge 702035 with Molex 2.0mm 2-Pin Connector
ESP32-C3 Super Mini Development Board With Headers Pins
[ESP Modules] Ultra Compact • Wi-Fi & BLE 5.0 • USB Type-C • Perfect for IoT & Embedded Projects The ESP32-C3 Super Mini Development Board is a compact, feature-rich development board built around the powerful ESP32-C3 SoC from Espressif. Powered by a 32-bit RISC-V single-core processor running at up to 160MHz, it combines 2.4GHz Wi-Fi, Bluetooth 5.0 Low Energy (BLE), and low-power operation in an ultra-small form factor. Designed for IoT, smart home, wireless communication, automation, and embedded system development, the ESP32-C3 Super Mini offers 4MB Flash memory, 400KB SRAM, multiple GPIOs, ADC, PWM, UART, SPI, and I2C interfaces for connecting sensors, displays, relays, and other peripherals. The onboard USB Type-C interface simplifies programming and power supply, while the built-in USB-to-Serial functionality enables quick firmware uploading without requiring additional programmers. Fully compatible with Arduino IDE, ESP-IDF, PlatformIO, and MicroPython, it is suitable for beginners, students, makers, and professional developers. Its ultra-compact breadboard-friendly design makes it ideal for portable and space-constrained projects where performance, wireless connectivity, and energy efficiency are essential. Note: Programming, software configuration, driver installation, firmware flashing, and coding-related issues are not covered under return or replacement. Users are expected to troubleshoot software-related issues independently. ⭐ Features Powerful ESP32-C3 32-bit RISC-V processor CPU frequency up to 160MHz Built-in 2.4GHz Wi-Fi (802.11 b/g/n) Integrated Bluetooth 5.0 Low Energy (BLE) Ultra-compact Super Mini design Breadboard-friendly layout USB Type-C interface for programming and power 4MB onboard Flash memory 400KB SRAM Multiple GPIO, ADC, PWM, UART, SPI & I2C interfaces Low power consumption with Deep Sleep mode Onboard programmable LED Compatible with Arduino IDE, ESP-IDF, PlatformIO & MicroPython Ideal for IoT, automation, robotics, and wireless applications 📋 Technical Specifications Product Type: Development Board Board Model: ESP32-C3 Super Mini Microcontroller: ESP32-C3 Processor Architecture: 32-bit RISC-V CPU Frequency: Up to 160MHz Core: Single Core Flash Memory: 4MB SRAM: 400KB Wi-Fi Standard: IEEE 802.11 b/g/n (2.4GHz) Bluetooth: Bluetooth 5.0 Low Energy (BLE) Operating Voltage: 3.3V Input Voltage: 5V via USB Type-C or 3.3V External USB Interface: USB Type-C GPIO: Multiple Digital GPIO Pins Analog Input: Up to 6 ADC Channels PWM: Supported UART: Supported SPI: Supported I2C: Supported USB-to-Serial: Onboard Onboard LED: User Programmable (GPIO8) Power Consumption: Ultra Low (Deep Sleep ≈ 43µA) Dimensions: Approx. 22.5 × 18 mm Headers: Pre-Soldered 🔧 Applications Suitable for: Internet of Things (IoT) Smart Home Automation Wireless Sensor Networks Home Automation Systems Bluetooth Low Energy Devices Wi-Fi Enabled Controllers Robotics Projects Data Logging Systems Remote Monitoring Industrial Automation Portable Embedded Devices Educational Learning DIY Electronics Projects Wearable Electronics Rapid Prototyping 📦 Package Includes 1 × ESP32-C3 Super Mini Development Board Pin Headers ⚠️ Note Programming, firmware installation, software configuration, and driver-related issues are not covered under warranty, return, or replacement. Please verify board compatibility and install the appropriate development environment before programming. Soldered and non-soldered header pin depend on stock
16mm Ultrasonic Humidifier Atomizer Disc Piezoelectric Mist Maker Transducer Module 108KHz
[Ultrasonic Sensor] The 16mm Ultrasonic Humidifier Atomization Module is a high-efficiency piezoelectric transducer designed for mist generation and humidification applications. It operates using ultrasonic vibration technology to convert water into ultra-fine mist particles quickly and efficiently. In addition, the module works on the principle of ultrasonic cavitation, where high-frequency sound waves generate rapid compression and rarefaction inside the water. As a result, microscopic water droplets are released into the air as cool mist. Because of its 108KHz resonant frequency, the atomizer produces fine and uniform fog particles while maintaining low noise operation. Furthermore, the compact 16mm design allows easy integration into humidifiers, aroma diffusers, medical atomizers, and DIY mist generation systems. The atomization disc is built using durable piezoelectric material for long operational life and stable performance. Moreover, the module consumes very little power while providing efficient mist output. ⚠️ Note: This atomizer module requires a compatible ultrasonic driver board for operation. The driver circuit is not included in the package and must be purchased separately. This ultrasonic humidifier module is widely used in humidifiers, beauty care devices, medical atomization equipment, aroma diffusers, and DIY electronics projects. 🔹 Key Features 16mm ultrasonic atomizer disc High-frequency 108KHz operation Fine and uniform mist generation Low noise operation Small fog particle output Long operational life High stability performance Low power consumption Suitable for humidifier and mist maker projects 🔹 Technical Specifications Product Type: Ultrasonic Atomizer Transducer Module Atomizer Diameter: 16mm Operating Voltage: DC 3.7V –5V Resonant Frequency: 108KHz Resonant Impedance: < 2 Ohms Coupling Factor: > 52% Electrostatic Capacity: 3000pF Spray Quantity: > 110mL/h Operation Type: Ultrasonic Piezoelectric Atomization Fog Particle Type: Ultra-Fine Mist Noise Level: Low Noise Operation Material: Piezoelectric Ceramic + Metal 🔹 Working Principle The ultrasonic atomizer uses a piezoelectric transducer immersed in water. When driven at high frequency, the transducer creates rapid mechanical oscillations that generate cavitation bubbles and surface waves. Consequently, microscopic water droplets are released into the air as cool mist with minimal energy consumption. 🔹 Applications This ultrasonic atomizer module is suitable for many applications, including: Humidifiers Mist makers Aroma diffusers Medical atomizers Facial beauty equipment DIY humidification projects Decorative fog systems 🔹 Package Includes 1 × 16mm Ultrasonic Humidifier Atomization Sensor Module
Li-Ion 18650 Rechargeable Battery 1200MAH Wired With BMS
[Lithium Battery Cell] Li-Ion 18650 Rechargeable Battery 1200MAH Wired With BMS Li-Ion Rechargeable Battery Nominal Specifications : Standard discharge capacity : Min. 1200mAh Nominal voltage : 3.63 V Maximum charge voltage : 4.20 V Standard charge current : CCCV, 1.3A, 4.20V, 20mA or 3hr cut-off Charging time Standard charge : 180min (@ RT) Rapid charge : 150min (@ RT) Max. continuous discharge : 1.2A (@ RT) Discharge cut-off voltage : 2.75V (End of discharge) Cell weight : 38.0g max (Approx) Cell dimension Height : Max. 65.00 mm Diameter : Max. 18.4 mm Operating temperature (Cell Surface temperature) Charge : 0 to 45℃ Discharge: -10 to 60℃ Colour may Be different from Picture shown Please ensure the standard precautions while using Li-ion cells to not puncture or damage the cells. Also please ensure that the charging and discharging parameters and temperatures are maintained within the specifications for achieving the longer cell life and optimal performance.
Type-C USB Input High Current 3A Polymer Ternary Lithium Battery Quick Fast Charging Board IP2312 CC/CV Mode 5V To 4.2V
[Lithium Battery Protection Board] Power your projects with the Type-C USB Input 3A Lithium Battery Fast Charging Board (IP2312) — a compact, high-efficiency charging solution designed for 3.7V lithium-ion and lithium polymer batteries. Built around the advanced IP2312 main control chip, this module delivers fast, stable, and intelligent charging using a full CC/CV (Constant Current / Constant Voltage) charging algorithm. It ensures optimal battery health, safety, and performance while supporting high current charging up to 3A, making it ideal for modern DIY electronics and portable power applications. The Type-C input interface provides universal compatibility with standard 5V USB power sources, while onboard indicator LEDs clearly display charging status. ⚠️ Note: Not suitable for 3.2V LiFePO4 (Lithium Iron Phosphate) batteries Key Features ⚡ High Current Fast Charging (Up to 3A)Supports rapid charging for lithium-ion/polymer batteries, reducing charging time significantly. 🔋 Advanced CC/CV Charging TechnologyEnsures safe and efficient charging with automatic switching between charging stages. 🔌 Type-C USB InputModern and widely compatible input interface (4.5V–5.5V), easy to power from adapters, power banks, or USB ports. 🧠 Smart Charging Management (IP2312 Chip)Automatically adjusts charging mode based on battery voltage for maximum safety and efficiency. 🔴🔵 LED Status Indicators Red LED: Charging in progress Blue LED: Fully charged 🛠️ Compact & Easy IntegrationSmall size makes it perfect for embedded systems, DIY battery packs, and portable devices. Charging Working Principle 🔹 Trickle Charging Mode (< 3V)When battery voltage is below 3V, the module charges with a safe low current (~100mA). 🔹 Constant Current Mode (> 3V)Once voltage exceeds 3V, it switches to constant current charging (up to 3A). 🔹 Constant Voltage Mode (~4.2V)As the battery approaches full charge, it maintains voltage while gradually reducing current. 🔹 Auto Cut-Off & Recharge Charging stops when current drops below 300mA Automatically resumes charging if voltage drops below 4.1V Specifications Specification Description Main Chip IP2312 Charging Mode CC/CV (Constant Current / Voltage) Input Voltage 4.5V – 5.5V (Type-C USB) Charging Current Up to 3A Battery Type 3.7V Li-ion / Li-Po Cut-off Voltage 4.2V / 4.35V Indicator LEDs Red (Charging), Blue (Full) Dimensions 34.5mm × 15mm Applications 🔋 DIY lithium battery packs🔌 Power bank projects🚗 Portable electronics & gadgets🔧 Arduino / ESP32 battery systems🔦 Rechargeable lighting systems📦 Embedded battery charging modules Package Includes 1 × Type-C USB 3A Lithium Battery Fast Charging Board (IP2312)
22.5W 5-Port Mobile Power Bank Charging Module QC4+PD3.0 Supported
[Lithium Battery Protection Board] The 22.5W 5-Port Bidirectional Fast Charging DIY Motherboard Kit is a compact and powerful charging solution designed for custom power bank projects. It supports advanced QC4+ and PD3.0 fast charging protocols, ensuring efficient and rapid charging for smartphones, tablets, and other USB-powered devices. In addition, the module features five charging ports, allowing multiple devices to charge simultaneously. As a result, it is suitable for portable charging stations, DIY battery packs, and high-capacity power bank applications. Because of its bidirectional fast charging capability, the module not only charges external devices quickly but also supports fast recharging of the connected battery pack. Furthermore, the compact PCB design allows easy installation into custom enclosures and DIY electronics projects. The motherboard kit includes several built-in protection functions such as overvoltage, overcurrent, short-circuit, and temperature protection. Therefore, it provides safer and more reliable charging performance. This DIY charging module is widely used in power banks, portable energy storage systems, backup power solutions, and DIY electronics projects. 🔹 Key Features Supports up to 22.5W fast charging 5 USB charging output ports QC4+ and PD3.0 fast charging support Bidirectional fast charging function Compact and efficient PCB design Multiple protection functions for safety Suitable for DIY power bank projects Stable and reliable charging performance 🔹 Technical Specifications Product Type: DIY Power Bank Charging Motherboard Fast Charging Support: QC4+ / PD3.0 Maximum Output Power: 22.5W Number of Ports: 5 Charging Type: Bidirectional Fast Charging Protection Features: Overvoltage, Overcurrent, Short Circuit, Temperature Protection Application: DIY Power Bank / Portable Charging System Mounting Type: PCB Module 🔹 Applications This charging motherboard kit is suitable for many portable power applications, including: DIY power banks Portable charging stations Battery backup systems Mobile charging projects Portable energy storage systems DIY electronics projects 🔹 Package Includes 1 × 22.5W 5-Port Fast Charging DIY Motherboard Kit
1S to 8S Battery Level Indicator Module For Li-ion Battery
[Li-Ion Capacity Indicator] Description: This is a 1S-8S Battery Capacity Indicator Module. The charge status (capacity) of 18650 Lithium-ion batteries and other lithium batteries with a maximum voltage of 4.2 volts per cell can be quickly visualized using these modules. This 1S-8S Battery Capacity Indicator module is ideal for DIY power supply, battery chargers, RC, and electric cars, as 1S-8S Battery Capacity Indicator displays the voltage state of the battery in a rapid and easy-to-read manner. Simply connect the 1S to 8S Battery Level Indicator module to the positive and negative contacts of your battery or battery pack, and a visible bar display shows the charge status of the battery in real-time. The 1S-8S Battery Capacity Indicator Display bars are Green, and the display outline is red. 1S-8S Battery Capacity Indicator can be used as an indicator for 1 to 8 cells or 1S to 8s Battery Pack and is user-configurable with a jumper pad setting. 1S-8S Battery Capacity Indicator has a Compact design with 4-segment display. Specifications: Number of Cells: 1~8S Number of cell Pre-set Setting: 1 Cell Indicator Type: 4 Bar Graph Operating Voltage: 3V-34VDC Operating Current: 5mA Operating Temperature: 10℃~65℃ Color: Blue and Outline red How to Use: Connect the positive and negative terminals of the display panel to the positive and negative terminals of the tested battery in parallel, and the digital tube not only displays the real-time battery power. Display power quantity parameters: (Note: N represents the number of batteries) When the battery voltage exceeds N*3.3V, it will illuminate 1 battery When the battery voltage exceeds N*3.5V, it will illuminate 2 pieces of electricity When the battery voltage exceeds N*3.7V, it will illuminate 3 pieces of electricity When the battery voltage exceeds N*3.9V, it will illuminate 4 pieces of electricity When the battery voltage is less than N*3.3V, the 4 displays will be turned off Package Included: 1 x 1S-8S Battery Capacity Indicator 1S to 8S Battery Level Indicator Module – Li-ion Battery Level Indicator *product image for illustration purposes only. actual product may vary.
BC547 NPN Good Quality General Purpose Transistor Rapid Make
[Transistor] BC547 NPN General Purpose Transistor TO-92 Package NPN transistor in a TO-92; SOT54 plastic package. PNP complements: BC556 and BC557. This device is designed for switching and amplifier applications.BC547 is a semiconductor device used to amplify or switch electronic signals and electrical power. It is composed of semiconductor material usually with at least three terminals for connection to an external circuit. A voltage or current applied to one pair of the transistor’s terminals controls the current through another pair of terminals. Because the controlled (output) power can be higher than the controlling (input) power, a transistor can amplify a signal. Today, some transistors are packaged individually, but many more are found embedded in integrated circuits. APPLICATIONS: General-purpose switching and amplification Features/Specs: Part No: C-TBC547B Brand: CDIL Transistor Polarity: NPN Collector-Base Voltage: 50VDC Collector-Emitter Voltage: 45VDC Emitter-Base Voltage: 6VDC Continuous Collector Current: 100mA Output Capacitance: 4.5pF Transition Frequency: 300MHz DC Current Gain: 110-800 Operating Temperature Range: -55 – 150°C Power Dissipation: 625mW Low error voltage Fast switching speed Full-voltage operation High power and current handling capability Package: TO-92 Material: Plastic Package
DC5V Humidifier USB Spray Module DIY Incubation Experiment Equipm 108KHz(mist maker)
[Ultrasonic Sensor] Description This DC Ultrasonic Humidifiers Power Circuit Board with Atomizing Chip Moisture Film Humidification atomization machine consists of an atomization plate tablet with a diameter of 20mm. This Ultrasonic Humidifier Piezoelectric Transmitter module works on the principle of cavitation produced by sound waves. Just provide the DC 3V to 5V power supply it will turn into a mini ultrasonic atomizer. As sound waves contain compression and rarefaction. Due to extremely rapid movement, water droplets can no longer sustain their liquid state and get converted into vapor immediately. This vibration is produced by a piezoelectric filament. Tags, USB Humidifier Atomization Driver Board PCB Circuit Board 5V Spray Incubation, Tags, OEM/ODM Available Mini Humidifier USB spray module humidifier pcb circuit board for DIY kit Incubation Experiment Equipment, USB Humidifier Atomization Driver Board PCB Circuit Board 5V Spray Incubation, 5V DIY Ultrasonic Piezoelectric Humidifier Moisture Atomizing Chip Mist maker circuit board. Features Come with a driver Power-ON trigger work 108KHz high-frequency oscillator Micron level aperture The glazed surface of the atomized sheet Features/Specs: Product Name: 108KHz 20mm USB Humidifier Work Voltage: DC 4.5V~5.0V Work Power:2W Work Frequency:108KHz(+/-3KHz) Power Type: Female USB Socket Diameter without rubber ring:16mm Diameter with rubber ring:20mm Spray Diameter:5um Spray Hole:740 holes Spray speed:50ml/h Work Temperature:0℃ ~ 85℃ Work Humidity:10%~90%RH Driver Size:35*19*15mm Length: 35 mm Width: 19 mm Height: 15 mm Weight: 10 gm Application: Humidifier | mist maker Beauty care for facial massager Medical liquid atomizing Equipment Package Includes: 1pc x Humidifier Driver Bord 1pc x 16mm Atomizer Plate 1pc x Cotton Stick Stand 1pc x Cotton Stick
Out of stockDigital Multimeter Small Yellow Color LCD AC DC Measuring Voltage Current
[Measuring Instruments] A multimeter or a multitester, also known as a VOM (Volt-Ohm meter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter would include basic features such as the ability to measure voltage, current, and resistance. Analog multimeters use a microammeter whose pointer moves over a scale calibrated for all the different measurements that can be made. Digital multimeters (DMM, DVOM) display the measured value in numerals, and may also display a bar of a length proportional to the quantity being measured. Digital multimeters are now far more common than analog ones, but analog multimeters are still preferable in some cases, for example when monitoring a rapidly-varying As the name suggests it is the multifunction device for all your testing need for daily work. When testing DC voltage, AC voltage, DC current, resistance, diode, buzzer, and battery, connect the red test lead to “VΩmA” jack and black test lead to “COM” jack, whereas When you need to test the current more than 200mA, connect the red test lead to “‘ 10A≡” jack and black test lead to “COM” jack. And When while testing the temperature, connect the temperature probe to “VΩmA” jack or “COM” jack. When testing the magnifying ratio of the transistor, turn the switch to hFE position and connect the transistor to the eight hole jack available in blue color. For the Square wave output, the frequency is 50Hz, the voltage is approximately 3Vp-p. The output jack is “VΩmA” and “COM” Description Table: Features : Small size makes it comfortable in many areas Brand new product. Good for newbies with basic knowledge of VI. No warranty on this product. No replacement or refund on this product Package Include: 1 x Digital Multimeter Small Yellow color and LCD display 2 x Measuring Probes(Red and Black)
1N5408 3 Amp General Purpose Diode Rapid
[Diode] 1N5408 3Amp Diode is a general-purpose silicon diode. For the protection of various devices, regulating current flow, etc this diode is useful.
Li-Ion 18650 Rechargeable Battery 1200MAH Wired
[Lithium Battery Cell] Li-Ion 18650 Rechargeable Battery 1200MAH Wired Li-Ion Rechargeable Battery Nominal Specifications : Standard discharge capacity : Min. 1200mAh Nominal voltage : 3.63 V Maximum charge voltage : 4.20 V Standard charge current : CCCV, 1.3A, 4.20V, 20mA or 3hr cut-off Charging time Standard charge : 180min (@ RT) Rapid charge : 150min (@ RT) Max. continuous discharge : 5.2A (@ RT) Discharge cut-off voltage : 2.75V (End of discharge) Cell weight : 38.0g max (Approx) Cell dimension Height : Max. 65.00 mm Diameter : Max. 18.4 mm Operating temperature (Cell Surface temperature) Charge : 0 to 45℃ Discharge: -10 to 60℃ Colour may Be different from Picture shown Please ensure the standard precautions while using Li-ion cells to not puncture or damage the cells. Also please ensure that the charging and discharging parameters and temperatures are maintained within the specifications for achieving the longer cell life and optimal performance.
QC3.0 QC2.0 USB DC-DC Buck Converter Fast Charging Module | 6–32V Step-Down to 3V / 5V / 9V / 12V | 4-Channel Quick Charger Circuit Board
[Step Down Buck Converter] 📝Description This QC3.0 QC2.0 USB DC-DC Buck Converter Charging Module is designed to convert a wide DC input range of 6V to 32V into stable fast-charging USB outputs. It supports Quick Charge 2.0 and 3.0 protocols, enabling intelligent voltage negotiation for rapid and efficient charging. The module features four independent output channels, making it suitable for charging multiple devices simultaneously. With support for common automotive and industrial voltages such as 9V, 12V, and 24V, it is perfect for use in cars, bikes, solar systems, battery packs, power banks, and embedded electronics projects. Thanks to its high-efficiency DC-DC step-down design, the module minimizes heat generation while maintaining reliable power delivery. This makes it an excellent choice for DIY enthusiasts, repair technicians, and developers looking to integrate fast USB charging into their systems. ⭐ Key Features ✔ Supports QC3.0 & QC2.0 Fast Charging Protocols ✔ Wide Input Range: 6V–32V DC (9V / 12V / 24V systems) ✔ Multi-Voltage Output: 3V / 5V / 9V / 12V ✔ Four-Channel USB Output for simultaneous charging ✔ High-Efficiency Buck Converter with low heat generation ✔ Automatic Voltage Negotiation for connected devices ✔ Ideal for automotive, solar, battery, and DIY electronics projects 🔧 Technical Specifications Input Voltage: 6V – 32V DCSupported Input Systems: 9V / 12V / 24VCharging Channels: 4 USB outputsFast-Charging Standards: QC2.0, QC3.0Supported Protocols: DCP BC1.2 Apple Charging Protocol Samsung Charging Protocol Huawei Fast Charge: FCP / SCP Huawei AFC Spreadtrum Fast Charge Protocol (SFCP) Qualcomm QC2.0 / QC3.0 Conversion Type: DC-DC Buck (Step-Down)Application Areas: Automotive USB charger, solar charging system, battery-powered devices, DIY electronics 📦 Package Includes 1 x 4 CHANNEL USB QC3.0 QC2.0 DC-DC Buck Converter Charging Step Down Module 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board
1N4007 General Purpose Rectifier Diode DO-41 (Through Hole) Made RAPID
[Diode] 1N 4007 – 1A General Purpose Rectifier Axial 4007 Diode 1N4007 is a rectifier diode, designed specifically for circuits that need to convert alternating current to direct current. It can pass currents of up to 1 A, and have a peak inverse voltage (PIV) rating of 1,000 V. Characteristics: Maximum Recurrent Peak Reverse Voltage 1000V Maximum RMS Voltage 700V Maximum DC Blocking Voltage 1000V Average Forward Current: 1.0A Peak Forward Surge Current: 30A Maximum Instantaneous Forward Voltage: 1.0V Maximum DC Reverse Current At Rated DC Blocking Voltage: 5.0µA @ 25°C Typical Junction Capacitance: 15pF Typical Reverse Recovery Time: 2.0us Mounting Type: Through Hole Operating Temperature: -55°C ~ 150°C Useful Resources:
ESP8266 NodeMCU CP2102 ESP-12E WiFi Development Board
[ESP Modules] ESP8266 NodeMCU CP2102 ESP-12E WiFi Development Board ESP8266 ESP-12E • CP2102 USB Interface • Built-in WiFi • Arduino & Lua Compatible • IoT Development Board The ESP8266 NodeMCU CP2102 ESP-12E WiFi Development Board is a compact and powerful development board designed for IoT (Internet of Things), wireless communication, home automation, robotics, and embedded system projects. Based on the highly popular ESP8266 ESP-12E WiFi module, it combines a 32-bit microcontroller, WiFi connectivity, and a CP2102 USB-to-Serial interface on a single breadboard-friendly board. The board comes preloaded with NodeMCU firmware, allowing easy programming using Lua scripting, while also offering full compatibility with the Arduino IDE, making it suitable for both beginners and advanced developers. With integrated 802.11 b/g/n WiFi, TCP/IP networking, multiple GPIO pins, PWM, I2C, SPI, and UART interfaces, it provides everything required for rapid IoT prototyping and wireless application development. The onboard CP2102 USB interface, 3.3V voltage regulator, and logic-level conversion circuitry allow direct connection to a computer for programming and power, eliminating the need for external USB-to-Serial converters. ⭐ Features ESP8266 ESP-12E WiFi module Built-in CP2102 USB-to-Serial interface 802.11 b/g/n WiFi connectivity Integrated TCP/IP protocol stack 32-bit processor with onboard memory Compatible with Arduino IDE, Lua, and NodeMCU firmware Breadboard-friendly compact design Multiple GPIO pins Supports PWM, I2C, SPI, and UART Onboard 3.3V voltage regulator Logic-level conversion circuitry included Low power consumption Ideal for IoT and wireless projects Easy plug-and-play programming 📋 Technical Specifications Product Type: WiFi Development Board Model: ESP8266 NodeMCU ESP-12E Microcontroller: ESP8266EX WiFi Standard: IEEE 802.11 b/g/n USB Interface: CP2102 Operating Voltage: 3.3V Input Voltage: 5V via Micro USB Flash Memory: 4MB CPU: 32-bit Tensilica L106 Clock Frequency: 80MHz / 160MHz GPIO Pins: Multiple Digital I/O Communication Interfaces: UART, SPI, I2C PWM Support: Yes ADC: 1 Channel (10-bit) USB Connector: Micro USB Firmware: NodeMCU (Preloaded) Programming Support: Arduino IDE, Lua, ESP8266 SDK Board Size: Approx. 58 × 31 mm 🔧 Applications IoT (Internet of Things) Projects Home Automation Smart Lighting Systems WiFi Sensor Nodes Wireless Data Logging Robotics Projects Arduino WiFi Projects ESP8266 Development Remote Monitoring Systems MQTT Applications Web Server Projects Smart Agriculture Industrial Automation DIY Electronics Educational Projects 📦 Package Includes 1 × ESP8266 NodeMCU CP2102 ESP-12E WiFi Development Board ⚠️ Note Operates at 3.3V logic levels. Install the CP2102 USB driver if the board is not detected by your computer. Use a good quality Micro USB cable for programming and power. Product appearance may vary slightly depending on the manufacturing batch.
Nano CH340 Chip Board without USB cable compatible with Arduino (Soldered)
[Arduino Boards] 🔷 Nano V3 CH340 ATmega328P Development Board (Soldered Headers) Compatible with Arduino ATmega328P • CH340 USB Interface • Compact Design • Breadboard Friendly • Ready to Use The Nano V3 CH340 Development Board is a compact and powerful microcontroller board based on the ATmega328P-AU microcontroller. Fully compatible with the Arduino Nano platform, it offers the same functionality as the Arduino Uno in a much smaller, breadboard-friendly form factor, making it ideal for embedded systems, robotics, IoT, automation, and DIY electronics projects. This version features the CH340 USB-to-Serial converter, providing a cost-effective and reliable programming interface. The board comes with pre-soldered headers, allowing it to be plugged directly into a breadboard or PCB without additional soldering. Powered by the ATmega328P running at 16MHz, the Nano provides 14 digital I/O pins, 8 analog input pins, 6 PWM outputs, and supports communication protocols including UART, SPI, and I²C. The onboard bootloader allows programming directly through the Mini USB port using the Arduino IDE. The Nano can be powered through the Mini USB connector, an external 6–20V DC supply, or a regulated 5V input, with automatic power source selection for seamless operation. Note: Some computers may require the CH340 USB driver before the board is recognized. ⭐ Features Based on ATmega328P-AU microcontroller Compatible with Arduino Nano V3 CH340 USB-to-Serial interface Pre-installed Arduino bootloader Pre-soldered header pins Compact breadboard-friendly design 14 Digital I/O pins (6 PWM) 8 Analog input pins 16MHz crystal oscillator Mini USB interface for programming Automatic power source selection Manual reset button ICSP header for direct programming TX, RX, Power and L status LEDs Supports Arduino IDE 📋 Technical Specifications Product Type: Microcontroller Development Board Board Version: Nano V3 Microcontroller: ATmega328P-AU USB Interface: CH340G Operating Voltage: 5V Input Voltage (Recommended): 7V–12V DC Input Voltage Range: 6V–20V DC Digital I/O Pins: 14 PWM Channels: 6 Analog Input Pins: 8 Flash Memory: 32KB SRAM: 2KB EEPROM: 1KB Clock Speed: 16MHz USB Connector: Mini USB Communication Interfaces: UART, SPI, I²C Programming: Arduino IDE Bootloader: Pre-installed Board Dimensions: 43 × 18 mm Mounting: Breadboard Compatible 🔧 Applications Suitable for: Arduino Projects Robotics IoT Devices Home Automation Sensor Interfaces Embedded Systems Educational Projects Industrial Automation Data Logging LED Control Motor Control Smart Home Devices Wearable Electronics DIY Electronics Rapid Prototyping 📦 Package Includes 1 × Nano V3 CH340 ATmega328P Development Board (Soldered Headers) USB Cable Not Included ⚠️ Note Mini USB cable is not included. Some Windows computers may require the CH340 USB driver before programming the board. Compatible with the Arduino IDE after selecting Arduino Nano and the appropriate processor/bootloader settings. Product appearance, PCB color, and component layout may vary slightly depending on the manufacturing batch.
IC 7812 TO-220 12V Linear Voltage Regulator RAPID Good Quality (L78M12CV/L7812CV/LM7812)
[Voltage Regulator IC] LM7812 12V Linear Voltage Regulator IC 7812 The L78M12CV is a three-terminal positive Voltage Regulator with several fixed output voltages, making it useful in a wide range of applications. This regulator can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each type employs internal current limiting, thermal shutdown and safe area protection, resulting it essentially indestructible. If adequate heat sinking is provided, they can deliver over 0.5A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltage and currents. Features- Thermal Overload Protection Short-circuit Protection Output Transition SOA Protection 4% Output Voltage Tolerance Guaranteed in Extended Temperature Range Applications: Power Management
IC 7805 TO-220 Linear Voltage Regulator LM7805 RAPID Good Quality
[Voltage Regulator IC] LM7805 5V Linear Voltage Regulator IC 7805 The L78M05CV is a fixed output, three-terminal precision positive voltage regulator in 3 pins TO-220 package. This regulator can provide local on-card regulation by eliminating distribution problems associated with single-point regulation. The L78M05CV fixed voltage regulator is designed with thermal overload protection that shuts down the circuit when subjected to an excessive power overload condition, internal short circuit protection that limits maximum current the circuit will pass and output transistor safe area compensation that reduces the output short circuit as the voltage across the pass transistor is increased. If adequate heat sinking is provided then this positive voltage regulator can deliver over 0.5A output current. Features: Fixed output voltage is 5V Output current is 0.5A Dropout voltage is 2V Maximum DC input voltage is 35V Output transition SOA protection Output voltage tolerance is 4% Operating temperature range 0°C to 125°C Applications: Power Management. Note: Image may vary from actual product in terms of Manufacturer/Brand name according to availability.
Out of stockESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
[ESP Modules] It is suitable for home smart devices, industrial wireless control, wireless monitoring, and other IoT applications. This module adopts a DIP package and can be directly inserted into the backplane to realize rapid production of products, providing customers with high-reliability connection mode, which is convenient for application in various IoT hardware terminals. ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture. It has the main frequency adjustment range of 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Note: The product dimension may have2% error. The product color may have some variation due to the light effect. Features : ESP32-CAM : The smallest 802.11b/g/n Wi-Fi BT SoC module. Low power 32-bit CPU, can also serve the application processor. Up to 160MHz clock speed, summary computing power up to 600 DMIPS. Built-in 520 KB SRAM, external 4MPSRAM. Supports UART/SPI/I2C/PWM/ADC/DAC. Support OV2640 and OV7670 cameras, built-in flash lamp. Support image WiFI upload. Supports TF card. Supports multiple sleep modes. Embedded Lwip and FreeRTOS. Supports STA/AP/STA+AP operation mode. Support Smart Config/AirKiss technology. Support for serial port local and remote firmware upgrades (FOTA). Wireless Module: ESP32-S WiFi 802.11 b/g/n + Bluetooth 4.2 LE module with PCB antenna, u.FL connector, 32Mbit SPI flash, 4MBit PSRAM. External Storage: micro SD card slotup to 4GB. Camera FPC connector. Support for OV2640 (sold with a board) or OV7670 cameras. Image Format: JPEG(OV2640 support only ), BMP, grayscale. LED flashlight. Expansion: 16x through-holes with UART, SPI, I2C, PWM. Misc: Reset button. Power Supply: 5V via pin header. Power Consumption. Flash LED off: 180mA @ 5V. Flash LED on to maximum brightness: 310mA @ 5V. Deep-sleep: 6mA @ 5V min. Modem-sleep: 20mA @ 5V min. Light-sleep: 6.7mA @ 5V min. Dimensions (ESP32): 40 x 27 x 12 (LxWxH) mm. Temperature Range: Operating: -20 ~ 85 ; storage: -40 ~ 90 @ <90%RH.