All products · 10 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
DC 12V 300RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor for Robotics
[Gear Motor] Description: This 12V 300RPM Gear Motor can be used for heavy-duty applications, robotics, or any industrial or educational applications. It has a wide range of features for obtaining the optimal performance characteristics. 12V 300RPM Gear Motor is very easy to use and does not need expensive motor control circuitry. The 12V 300RPM Gear Motor are very popularly used in robotics applications. The gearbox of the motor helps in providing greater torque that is required to drive robotic vehicles. Based on the gearbox design the RPM and Torque of the motor will vary. Specifications: Working Voltage: 12V DC Rated RPM: 300RPM Load Current Max: 300mA No-Load Current: 60mA Torque Range: 5kg-cm (Approx) Stall torque: 28kg-cm (Approx) Features: 12V 300RPM Gear Motor comes with good-quality gear. The gearbox is sealed and lubricated with lithium grease and requires no maintenance. Although the motor gives 300 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque. The shaft has a hole for better coupling. Package Included: 1 x 12V 300RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor for Robotics
NE5532 2.1 Channel Tone Preamplifier Board Audio Equalizer Subwoofer Preamp Tone Control Bass Pre Amplifier DC10-24V
[Amplifier Board] Product Introduction The product innovation uses a single power supply, which can share power with the power amplifier board. It is very convenient to use NE5532 as the operational amplifier. The operational amplifier IC base is welded to facilitate the replacement of the operational amplifier, and improve the playability. All CBB capacitors are Philips capacitors, and Potentiometer are high-quality platform produced sealed Potentiometer. You can check our others amplifier boards here. Product parameters Product name: 2.1 channel front stage board Frequency adjustment range: 22Hz-300Hz Power supply voltage: DC10-24V Operational amplifier model: NE5532 Board size: 82x30mm Number of channels: single/dual channel input possible Board thickness: 1.6mm Audio input: onboard terminal Centre-to-centre distance of Potentiometer: 3cm * 3cm
NY-D01 40A Digital Display Spot Welding Controller Board
[Spot Welding Parts] This is a NY-D01 40A Digital Display Spot Welding Controller Board. The principle of silicon controlled phase shifting triggering is adopted to adjust the time and the current to achieve welding. With a digital display, you can directly see the time and current. Optocoupler isolates the strong and weak electricity, making the operation safer. Using a high-precision single potentiometer to ensure reliable and convenient input. The design of a reliable zero-crossing detection circuit ensures the SCR phase shift accuracy. Made of high-quality PCB, the control board is long-lasting. The module is 8cm long, 6cm wide and 2cm high. It is developed for DIY or simple resistance welding. Connection Diagram: Features: 1 The use of STM8 industrial control centre microcontroller. 2 Strong and weak electricity through optocoupler insulation, safe operation. 3 The power line and footswitch line adopts the bolt the quick connect terminal, more convenient and reliable. 4 Input time, current using a high-precision simple potentiometer, to ensure reliable, convenient input 5 On-board power supply, state, foot, trigger indicator, work status clearly visible. 6 The design of a reliable zero-crossing detection circuit to ensure that the SCR phase shift accuracy. 7 The controller is compatible with 40A SCR. 8 Digital control interface, you can display the current time and current settings. 9 Input time of 1-50, cycle unit (1 cycles is 20 ms), current input (30-99%), Package Includes: 1 x NY-D01 40A Digital Display Spot Welding Controller Board
DC 12V 1000RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor for Robotics
[Gear Motor] Description: This 12V 1000RPM Gear Motor can be used for heavy-duty applications, robotics, or any industrial or educational applications. It has a wide range of features for obtaining the optimal performance characteristics. 12V 1000RPM Gear Motor is very easy to use and does not need expensive motor control circuitry. The 12V 1000RPM Gear Motor are very popularly used in robotics applications. The gearbox of the motor helps in providing greater torque that is required to drive robotic vehicles. Based on the gearbox design the RPM and Torque of the motor will vary. Specifications: Working Voltage: 12V DC Rated RPM: 1000RPM Load Current Max: 300mA No-Load Current: 60mA Torque Range: 5kg-cm (Approx) Stall torque: 28kg-cm (Approx) Features: 12V 1000RPM Gear Motor comes with good-quality gear. The gearbox is sealed and lubricated with lithium grease and requires no maintenance. Although the motor gives 1000 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque. The shaft has a hole for better coupling. Package Included: 1 x 12V 1000RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor for Robotics
Out of stockDC 12V 100RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor
[Gear Motor, Motor and Driver] Description: This 12V 100RPM Gear Motor can be used for heavy-duty applications, robotics, or any industrial or educational applications. It has a wide range of features for obtaining the optimal performance characteristics. 12V 100RPM Gear Motor is very easy to use and does not need expensive motor control circuitry. The 12V 100RPM Gear Motor are very popularly used in robotics applications. The gearbox of the motor helps in providing greater torque that is required to drive robotic vehicles. Based on the gearbox design the RPM and Torque of the motor will vary. Specifications: Working Voltage: 12V DC Rated RPM: 100RPM Load Current Max: 300mA No-Load Current: 60mA Torque Range: 5kg-cm (Approx) Stall torque: 28kg-cm (Approx) Features: 12V 100RPM Gear Motor comes with good-quality gear. The gearbox is sealed and lubricated with lithium grease and requires no maintenance. Although the motor gives 100 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque. The shaft has a hole for better coupling. Package Included: 1 x 12V 100RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor
DC 12V 200RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor for Robotics
[Gear Motor] Description: This 12V 200RPM Gear Motor can be used for heavy-duty applications, robotics, or any industrial or educational applications. It has a wide range of features for obtaining the optimal performance characteristics. 12V 200RPM Gear Motor is very easy to use and does not need expensive motor control circuitry. The 12V 200RPM Gear Motor are very popularly used in robotics applications. The gearbox of the motor helps in providing greater torque that is required to drive robotic vehicles. Based on the gearbox design the RPM and Torque of the motor will vary. Specifications: Working Voltage: 12V DC Rated RPM: 200RPM Load Current Max: 300mA No-Load Current: 60mA Torque Range: 5kg-cm (Approx) Stall torque: 28kg-cm (Approx) Features: 12V 200RPM Gear Motor comes with good-quality gear. The gearbox is sealed and lubricated with lithium grease and requires no maintenance. Although the motor gives 200 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque. The shaft has a hole for better coupling. Package Included: 1 x 12V 200RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor for Robotics
DC 12V 500RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor for Robotics
[Gear Motor] Description: This 12V 500RPM Gear Motor can be used for heavy-duty applications, robotics, or any industrial or educational applications. It has a wide range of features for obtaining the optimal performance characteristics. 12V 500RPM Gear Motor is very easy to use and does not need expensive motor control circuitry. The 12V 500RPM Gear Motor are very popularly used in robotics applications. The gearbox of the motor helps in providing greater torque that is required to drive robotic vehicles. Based on the gearbox design the RPM and Torque of the motor will vary. Specifications: Working Voltage: 12V DC Rated RPM: 500RPM Load Current Max: 300mA No-Load Current: 60mA Torque Range: 5kg-cm (Approx) Stall torque: 28kg-cm (Approx) Features: 12V 500RPM Gear Motor comes with good-quality gear. The gearbox is sealed and lubricated with lithium grease and requires no maintenance. Although the motor gives 500 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque. The shaft has a hole for better coupling. Package Included: 1 x 12V 500RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor for Robotics
Out of stockDC 12V 60RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor for Robotics
[Gear Motor] Description: This 12V 60RPM Gear Motor for robotics applications. This 12V 60RPM Gear Motor is very easy to use and available in standard size. Nut and threads on shaft to easily connect and internal threaded shaft for easily connecting it to wheel. Based on the gearbox design the RPM and Torque of the motor will vary. Specifications: Operating Voltage: 12V DC Stall Torque: 0.5kgcm torque No-load Current: 60 mA(Max) Load urrent: 300 mA(Max) Features: Easy to connect with Pully, Wheel, and rotary with M3 thread hole. Long Gearbox shaft provides displacement with machine application. 12V 60RPM Gear Motor provides very high torque, applicable in spindle motor also. Package Included: 1 x 12V 60RPM Gear Motor Centre Shaft DC Geared Motor Heavy Duty Motor for Robotics
Out of stockATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board
[Arduino Boards] The ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board is a micro-controller board base on the ATmega2560. It has a USB host interface to connect with Android based phones, base on the MAX3421e IC. It has 54 digital input/output pins (of which 15 can be used as PWM outputs); 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator; a USB connection, a power jack, an ICSP header, and a reset button. The MEGA ADK is base on the Mega 2560. Similar to the Mega 2560 and Uno, it features an ATmega8U2 program as a USB-to-serial converter. Revision 3 of the Mega ADK board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU(Device Firmware Upgrade) mode. The board has the following new features: 1.0 pin-out: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In the future, shields will be compatible both with the board that uses the AVR, which operate with 5V and with the Arduino Due which operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit. The Mega Arduino R3 Android Accessory Development Kit (ADK) can be powered via a USB connection or with an external power supply. The power source is selected automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm centre-positive plug into the board’s power jack. Leads from a battery can be inserted in the GND and Vin pin headers of the POWER connector. Because the Mega R3 Android Accessory Development Kit (ADK) is a USB Host, the phone will attempt to draw power from it when it needs to charge. When the ADK is powered over USB, 500mA total is available for the phone and board. Package Includes : 1 x Mega R3 Android Accessory Development Kit (ADK) board.
Out of stock12V Centre Shaft DC Geared Motor (Multi RPM)
[Gear Motor] Multiple RPM DC Gear Robotics Motor 12v DC Gear Motors – 12Volts are generally a simple DC motor with a gearbox attached to it. This can be used in all-terrain robots and variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly. These 12V DC geared motors widely use for robotics applications. Very easy to use and available in standard size. Also, you don’t have to spend a lot of money to control motors with an Arduino or compatible board. The most popular L298N H-bridge module with onboard voltage regulator motor driver can be used with this motor that has a voltage of between 5 and 35V DC or you can choose the most precise motor diver module from the wide range available in our Motor divers category as per your specific requirements. Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel.DC Geared motors with robust metal gearbox for heavy-duty applications, available in the wide RPM range and ideally suited for robotics and industrial applications.Very easy to use and available in standard size. Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel. Specifications and Features:- RPM: Multi RPM. Operating Voltage: 12V DC Gearbox: Attached Plastic (spur)Gearbox Shaft diameter: 6mm with internal hole Torque: 1 kg-cm No-load current = 60 mA(Max) Load current = 300 mA(Max). Note: Colour and sticker on the product may vary in each lot. We ship randomly.