All products · 97 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Arduino Plug & Play
Controller: Arduino UNO/Nano compatible (ATmega328P), 5V logic. Interfaces: Digital I/O, PWM, Analog In, I2C/SPI/UART. USB programming. Plug-and-play sensor ports (JST/RJ/3-pin). Power: USB 5V / DC 7–12V (if UNO).
ASUS Dual Radeon RX 7600 EVO OC Edition 8GB GDDR6 Graphics Card
[Graphics Card] ASUS Dual Radeon RX 7600 EVO OC Edition 8GB GDDR6 Graphics Card The ASUS Dual Radeon RX 7600 EVO OC Edition combines dynamic thermal performance with broad compatibility. Advanced cooling solutions from flagship graphics cards — including two Axial-tech fans for maximizing airflow to the heatsink — are packed into the 22.8 cm long, 2.5-slot card, delivering more power in less space. ⭐ Key Features - Axial-tech fan design features a smaller fan hub that facilitates longer blades and a barrier ring that increases downward air pressure - 0dB technology lets you enjoy light gaming in relative silence - Dual ball fan bearings can last up to twice as long as sleeve bearing designs - A 2.5-slot design allows for greater build compatibility while maintaining premium cooling - Auto-Extreme precision automated manufacturing for higher reliability - GPU Tweak III software provides intuitive performance tweaking, thermal controls, and system monitoring 📋 Technical Specifications - Graphic Engine: AMD Radeon RX 7600 - Bus Standard: PCI Express 4.0 - OpenGL: OpenGL 4.6 - Video Memory: 8GB GDDR6 - Engine Clock: OC mode up to 2745 MHz (Boost Clock) / 2340 MHz (Game Clock) - Stream Processors: 2048 - Memory Speed: 18 Gbps - Memory Interface: 128-bit - Resolution: Digital Max Resolution 7680 x 4320 - Interface: 1x HDMI 2.1a, 3x DisplayPort 1.4a (HDCP 2.3 Support) - Maximum Display Support: 4 - Recommended PSU: 550W - Power Connectors: 1 x 8-pin - Dimensions: 228 x 123 x 49 mm (2.5 Slot) 🎯 Applications - 1080p and 1440p high-framerate competitive esports and AAA gaming - Content creation with AV1 hardware encoding - Compact Micro-ATX and Mini-ITX small form-factor gaming builds 📦 Package Includes - 1 x ASUS Dual RX 7600 EVO OC 8GB Graphics Card - 1 x Collection Card & Speedsetup Manual
AMD Ryzen 7 5800X3D Processor 10th Anniversary Edition with Carbice Ice Pad
[Processor] AMD Ryzen 7 5800X3D Processor 10th Anniversary Edition with Carbice Ice Pad The legendary gaming champion for socket AM4, featuring revolutionary AMD 3D V-Cache technology with a massive 96MB of L3 cache. This special 10th Anniversary Edition includes an ultra-high performance Carbice carbon-nanotube thermal Ice Pad for maximum heat transfer. ⭐ Key Features - 8 Cores and 16 Threads powered by Zen 3 architecture - 96MB of 3D V-Cache (100MB Total Cache) - Dramatically boosts gaming frame rates over standard Zen 3 CPUs - Includes authentic Carbice Ice Pad thermal interface material - Drops directly into existing AM4 motherboards with a BIOS update - Unlocked for memory tuning and precision boost undervolting 📋 Technical Specifications - Socket: AM4 - Core Count: 8 - Thread Count: 16 - Base Clock: 3.4 GHz - Boost Clock: Up to 4.5 GHz - L3 Cache: 96 MB - TDP: 105W - PCIe Version: PCIe 4.0 - Memory Support: DDR4-3200 (Supports higher via XMP/DOCP) 🎯 Applications - Ultimate AM4 gaming upgrade without replacing motherboard or RAM - Competitive simulation games (Microsoft Flight Sim, Assetto Corsa, Factorio) - High-FPS competitive esports 📦 Package Includes - 1 x AMD Ryzen 7 5800X3D Processor - 1 x Carbice Ice Pad Thermal Interface - 1 x 10th Anniversary Collector Badge & Certificate
SanDisk Extreme E61 1TB USB 3.2 Gen 2 Type-C Rugged Portable SSD
[Storage] SanDisk Extreme E61 1TB USB 3.2 Gen 2 Type-C Portable Solid State Drive Rugged, high-speed NVMe storage on the go. Delivers blazing read speeds up to 1050 MB/s and write speeds up to 1000 MB/s in a pocket-sized, drop-resistant, IP65 water-and-dust resistant silicone shell with carabiner loop. ⭐ Key Features - Up to 1050 MB/s read and 1000 MB/s write speeds - IP65 water and dust resistance, up to 3-meter drop protection - Handy carabiner loop secures the drive to your belt loop or backpack - 256-bit AES hardware encryption with password protection - Compatible with Windows, Mac, Android, and USB-C iPhones/iPads 📋 Technical Specifications - Capacity: 1TB - Interface: USB 3.2 Gen 2 (Type-C) - Durability: IP65 Rated - Dimensions: 100.54 x 52.42 x 8.95 mm - 5-Year SanDisk Official Warranty 📦 Package Includes - 1 x SanDisk Extreme Portable SSD 1TB - 1 x USB-C to USB-C Cable with USB-A Adapter
ADXL345 Accelerometer
ADXL345 3-axis accelerometer. Interface: I2C/SPI. Supply: 2.0–3.6V (modules often 3.3–5V). Ranges: ±2/±4/±8/±16g.
Nextron Nforce AMD Radeon RX 580 8GB GDDR5 Graphics Card
[Graphics Card] Nextron Nforce AMD Radeon RX 580 8GB GDDR5 Dual Fan Gaming Graphics Card The Nextron Nforce RX 580 8GB delivers responsive, fluid 1080p gaming performance powered by AMD Polaris architecture. Equipped with 8GB of high-speed GDDR5 memory and a dual-fan thermal cooling solution with copper heat pipes. ⭐ Key Features - High-capacity 8GB GDDR5 video memory with 256-bit bus width - Dual 90mm cooling fans with multi-rib heat dissipation - Dual slot aerodynamic shroud design - AMD FreeSync technology support for tear-free gaming - DirectX 12 and Vulkan API hardware acceleration - Multiple display connectivity with HDMI, DisplayPort, and DVI-D 📋 Technical Specifications - GPU Engine: AMD Radeon RX 580 (Polaris 20) - Stream Processors: 2048 Cores - Core Clock: Up to 1284 MHz - Memory Clock: 7000 MHz effective - Memory Interface: 256-bit GDDR5 - Bus Type: PCI-Express 3.0 x16 - Video Outputs: 1x HDMI 2.0b, 3x DisplayPort 1.4, 1x Dual-Link DVI-D - Thermal Design Power (TDP): 150W - Power Connector: 1x 8-Pin PCIe - Recommended Power Supply: 450W minimum 🎯 Applications - Budget 1080p gaming (CS2, GTA V, Valorant, Apex Legends, Fortnite) - Multi-monitor workstation setups for trading and productivity - Affordable 3D rendering and graphic design rigs 📦 Package Includes - 1 x Nextron Nforce RX 580 8GB GDDR5 Graphics Card - 1 x Driver CD & Quick Installation Guide
MSI GeForce RTX 5050 GAMING OC 8GB GDDR6 Graphics Card
[Graphics Card] MSI GeForce RTX 5050 GAMING OC 8GB GDDR6 Graphics Card MSI's iconic GAMING series brings high performance, low-noise efficiency, and tight aesthetics that hardcore gamers have come to recognize and trust. Powered by TWIN FROZR 9 thermal design with TORX FAN 5.0 and Airflow Control. ⭐ Key Features - TWIN FROZR 9 Thermal Design - TORX Fan 5.0 with fan blades linked by outer ring arcs - Solid nickel-plated copper baseplate - Mystic Light RGB sync with custom lighting presets - MSI Center software for real-time hardware telemetry 📋 Technical Specifications - Memory: 8GB GDDR6 - Boost Clock: 2565 MHz (Extreme Performance) - Interface: PCI Express Gen 5 - Power Consumption: 130W (1x 8-pin) - Recommended PSU: 550W 📦 Package Includes - 1 x MSI GeForce RTX 5050 GAMING OC 8GB Graphics Card - 1 x Quick User Guide
SanDisk Optimus GX Pro 8100 1TB PCIe Gen5 x4 NVMe M.2 SSD
[Storage] SanDisk Optimus GX Pro 8100 1TB PCIe Gen 5x4 M.2 2280 NVMe SSD Next-generation PCIe 5.0 speed beast delivering up to 14,000 MB/s sequential read and 12,000 MB/s sequential write performance. Powered by 232-layer 3D TLC NAND and advanced multi-core controller with thermal throttling shield. ⭐ Key Features - Blistering speeds up to 14,000 MB/s Read / 12,000 MB/s Write - PCIe Gen5 x4 NVMe 2.0 interface - DirectStorage API acceleration for near-instant game loading - Dynamic SLC caching and DRAM cache buffer - 1,200 TBW endurance rating 📋 Technical Specifications - Form Factor: M.2 2280 - Interface: PCIe Gen 5.0 x4 - TBW: 1200 Terabytes Written - MTTF: 2.0 Million Hours 📦 Package Includes - 1 x SanDisk Optimus GX Pro 8100 1TB Gen5 NVMe SSD
Out of stock0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306
[LED/LCD Display] 0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306 The 0.96-inch Blue OLED Display Module is a compact graphical display based on the SSD1306 driver IC, featuring a 128×64 pixel resolution and blue monochrome display. This version has a 7-pin interface with a dedicated CS (Chip Select) pin, making it suitable for 4-wire SPI communication. The module is factory-configured for SPI and can also be modified for I2C/IIC communication on compatible board versions. With its compact size, wide viewing angle and low-power OLED technology, it is suitable for Arduino, ESP32, ESP8266, STM32, Raspberry Pi and other microcontroller projects. ⭐ Key Features 0.96-inch blue OLED display 128 × 64 pixel resolution SSD1306 driver IC 7-pin interface Dedicated CS (Chip Select) pin Factory configured for 4-wire SPI Supports SPI and I2C/IIC with appropriate configuration 3.3V/5V compatible on supported module versions No backlight required Low power consumption Wide viewing angle of more than 160° Compact PCB design Pre-soldered 7-pin male header Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi projects 📋 Technical Specifications Display Type: OLED (Organic Light-Emitting Diode) Display Colour: Blue Display Size: 0.96 inch Driver IC: SSD1306 Resolution: 128 × 64 pixels Interface: SPI / I2C Default Interface: 4-wire SPI Input Voltage: 3.3V–5V Viewing Angle: >160° Module Dimensions: Approximately 27 × 27 × 4mm Operating Temperature: Approximately -30°C to +70°C Header: 7-pin male header, pre-soldered Display Type: Monochrome blue OLED 🔌 7-Pin Interface The 7-pin version provides the following connections: GND – Ground VCC – Power supply D0 / SCK / CLK – SPI clock D1 / MOSI / SDA – SPI data RES / RST – Display reset DC / A0 – Data/Command selection CS – Chip Select 🛠️ SPI Connection The module is normally supplied in 4-wire SPI configuration. For an Arduino Uno, a typical connection is: VCC → 5V GND → GND D0 → SCK / D13 D1 → MOSI / D11 RES → Digital I/O DC → Digital I/O CS → Digital I/O The dedicated CS pin allows the OLED to share the SPI bus with other devices such as SD cards or additional SPI peripherals. 🔄 I2C / IIC Configuration On compatible versions, the module can be converted from SPI to I2C by changing the appropriate resistor configuration on the PCB. The supplied board configuration may require: Moving the resistor from R3 to R1 Shorting R8 with solder Using D0 as SCL Using D1 as SDA Configuring DC for the I2C address The exact resistor positions can vary between board revisions, so check the markings on your particular PCB before modification. 🎯 Applications Arduino projects ESP32 projects ESP8266 projects STM32 development Raspberry Pi projects IoT devices Sensor displays Voltage/current meters Battery monitors Temperature displays Digital clocks Data loggers Portable electronic devices Robotics DIY measuring instruments Embedded systems Menu and status displays 💡 Advantages of OLED OLED technology is self-emissive, meaning the pixels produce their own light and do not require a conventional backlight. This provides high contrast, compact construction and a wide viewing angle while keeping power consumption relatively low. ⚠️ Important Notes This is the 7-pin SPI version, not the 6-pin version. The module is normally configured for SPI communication. Check the PCB labels before connecting the module. Do not exceed the specified supply voltage. Although many versions support 5V operation, the exact voltage tolerance can vary between board revisions. I2C operation may require hardware resistor modification. The actual PCB layout and component markings may vary slightly between production batches. Display colour: Blue. Libraries such as Adafruit SSD1306 and U8g2 can be used with compatible microcontrollers. 📦 Package Includes 1 × 0.96 Inch Blue SPI OLED Display Module
2S 4A Type-C Lithium Battery Charging Module – 8.4V Step-Up Boost Charger for 18650 Lipo
[Step UP Buck Converter] 2S 4A Type-C Lithium Battery Charging Module – 8.4V Step-Up Boost Charger for 18650 The 2S 4A Type-C Lithium Battery Charging Module is a compact step-up charging board designed for charging 2-cell series (2S) 18650 Li-ion/Li-Po battery packs. It accepts a 3–6V DC input through USB Type-C and boosts the voltage to 8.4V, the required full-charge voltage for a 2S lithium battery pack. The 4A specification refers to the maximum input current version. According to available product specifications, the corresponding charging current is approximately 2.2A, rather than 4A. ⭐ Key Features Designed for 2S lithium-ion/Li-Po battery packs Suitable for 2 × 18650 cells connected in series USB Type-C input 3–6V DC input Recommended input: 3.7V / 5V Step-up/boost charging circuit 8.4V charging voltage 4A maximum input-current version Approximately 2.2A charging current Automatic recharge function Battery charging protection features Compact PCB design LED charging/status indication Suitable for DIY battery and portable-power projects 📋 Technical Specifications Product Type: 2S Lithium Battery Step-Up Charging Module Battery Configuration: 2S – 2 cells in series Compatible Battery: 3.6V/3.7V Li-ion / Li-Po Nominal Battery Pack Voltage: 7.4V Full-Charge Voltage: 8.4V Input Voltage: DC 3–6V Recommended Input: DC 3.7V / 5V Maximum Input Current: 4A Charging Current: Approximately 2.2A Charging Interface: USB Type-C Charging Mode: Constant-current / constant-voltage Board Size: Approximately 39 × 18 × 6.3mm Operating Temperature: -40°C to +85°C LED Indicators: Charging / fully charged or constant-voltage status 🔋 Charging Performance For the 2S 4A version: USB Type-C 5V → Boost Charging Module → 8.4V → 2S Battery Pack The module draws up to approximately 4A from the input, while the specified charging current is approximately 2.2A. This distinction is important when selecting the USB power adapter. 🔧 Applications 2S 18650 battery packs 7.4V Li-ion battery packs 2S Li-Po battery packs DIY power banks Portable electronics Bluetooth speaker battery systems Robotics projects Solar charging applications Electronic prototyping Portable audio equipment Electric fan projects Type-C rechargeable equipment Custom battery charging systems 🛠️ How It Works The module uses a boost/step-up charging circuit to convert the lower USB Type-C input voltage into the 8.4V charging voltage required for a 2S lithium battery pack. Example: 5V Type-C Input → Step-Up Circuit → 8.4V Charging Output → 2S 18650 Battery A 2S battery pack consists of two lithium cells connected in series: 3.7V + 3.7V = 7.4V nominal4.2V + 4.2V = 8.4V fully charged 💡 LED Indicators The module uses status indicators to show the charging condition: CR: Charging OK: Fully charged / constant-voltage stage ⚠️ Important Notes This module is intended for 2S battery packs only. Do not connect a single 18650 cell directly to the 8.4V charging output. The two cells should be properly matched and in good condition. Do not exceed the 6V maximum input voltage. A suitable Type-C power source is required to supply the necessary input current. The 4A rating is the input-current rating, not the battery charging current. The specified charging current for this 2S 4A version is approximately 2.2A. This charging module should not automatically be considered a replacement for a dedicated 2S BMS/protection board. Use appropriate battery protection where required. Check the PCB polarity and connection markings before connecting the battery. Do not short-circuit the input or output. Use properly matched lithium cells for safe and reliable charging. Keep the module adequately ventilated during higher-current operation. 📦 Package Includes 1 × 2S 4A Type-C Step-Up Boost Lithium Battery Charging Module – 8.4V
Digital USB Mobile Power Charging Current Voltage Tester Meter
[Ammeter and Voltmeter] Digital USB Mobile Power Charging Current Voltage Tester Meter The Digital USB Mobile Power Charging Current Voltage Tester Meter is a compact USB testing device designed to measure and display charging voltage and current in real time. It is useful for checking the power output of USB chargers, power banks and other USB-powered devices. ⭐ Key Features Precise current and voltage measurement Simultaneous voltage and current display Bright digital LCD display Straight USB connector design USB Type-A Male input and USB Type-A Female output Compact and lightweight Easy to connect and use Suitable for USB chargers and power banks Compatible with USB-powered devices 📋 Technical Specifications Product Name: Digital USB Mobile Power Charging Current Voltage Tester Meter Color: As per available stock Input Voltage: 3.5V–7.0V Output Voltage: 3.5V–7.0V Current Measurement Range: 0A–3A Voltage Accuracy: ±1% Current Accuracy: ±1% Display Type: Digital LCD Display Screen Size: 0.91 inch Data Display: Voltage and Current simultaneously Power Consumption: ≤0.1W Interface: USB Type-A Male (Input) / USB Type-A Female (Output) Measurement Frequency: 2 times per second Operating Temperature: 0°C–45°C Material: ABS Plastic Dimensions: 64 × 23 × 15mm Weight: 15g Compatibility: USB-powered devices 🔧 Applications Mobile charger testing USB charger testing Power bank testing USB power supply testing Mobile phone charging analysis USB device testing Electronics troubleshooting DIY electronics projects Checking charging voltage and current 🛠️ How to Use Insert the USB Type-A Male connector into the USB charger, power bank or USB power source. Connect the USB-powered device to the USB Type-A Female output. The digital display will show the voltage and charging current. Monitor the readings during charging or testing. 📦 Package Includes 1 × Digital USB Mobile Power Charging Current Voltage Tester Meter ⚠️ Important Notes Do not exceed the specified voltage and current measurement ranges. This tester is intended for USB/DC applications. Actual readings may vary depending on the charger, cable and connected device. Use within the specified operating temperature range.
3-in-1 Aluminum Heat Sink Set for Raspberry Pi 3
[Aluminium Heat Sink] ❄️ 3-in-1 Aluminum Heat Sink Set for Raspberry Pi 3 High-Quality Aluminum • Self-Adhesive Thermal Tape • Improved Cooling • Easy Installation The 3-in-1 Aluminum Heat Sink Set for Raspberry Pi 3 is a premium cooling accessory designed to improve heat dissipation and maintain stable operating temperatures for Raspberry Pi boards. Manufactured from high-quality aluminum, these heat sinks efficiently transfer heat away from critical components, helping improve performance and extend the life of your Raspberry Pi. The kit includes three aluminum heat sinks of different sizes to cool the processor, Ethernet/LAN controller, and other heat-generating ICs. Each heat sink comes pre-installed with a high-performance thermal adhesive backing, allowing quick and secure installation without the need for additional thermal paste or glue. By reducing operating temperatures, the heat sinks help prevent thermal throttling during continuous operation, making them ideal for overclocking, media centers, home servers, IoT applications, industrial automation, and embedded systems. ⭐ Features Premium-quality aluminum construction Excellent thermal conductivity Self-adhesive thermal tape for easy installation No thermal paste required Lightweight and durable Improves heat dissipation Reduces processor temperature Helps prevent thermal throttling Ideal for continuous operation and overclocking Designed specifically for Raspberry Pi boards Corrosion-resistant aluminum finish Easy peel-and-stick installation 📋 Technical Specifications Product Type: Aluminum Heat Sink Set Compatibility: Raspberry Pi 3 Model A, A+, B, B+ Material: Aluminum Color: Silver Quantity: 3 Heat Sinks Mounting Method: Self-Adhesive Thermal Tape Thermal Interface: Pre-applied Thermal Adhesive Cooling Type: Passive Cooling Weight: Lightweight Installation: Peel-and-Stick 🔧 Applications Suitable for: Raspberry Pi 3 Model B Raspberry Pi 3 Model B+ Raspberry Pi 3 Model A+ Raspberry Pi 3 Model A Raspberry Pi Media Center Home Automation Projects IoT Devices Embedded Systems Robotics Projects Industrial Controllers NAS Servers Retro Gaming Consoles AI Edge Computing Educational Projects DIY Electronics 📦 Package Includes 1 × Large Aluminum Heat Sink (CPU) 1 × Medium Aluminum Heat Sink (LAN/Ethernet Controller) 1 × Small Aluminum Heat Sink (Additional IC / Spare)
XH-W1219 12V Digital Temperature Controller Module with Dual LED Display & Waterproof NTC Sensor
[Relay Module, Temperature Sensor] 🌡️ XH-W1219 12V Digital Temperature Controller Module with Dual LED Display & Waterproof NTC Sensor Dual LED Display • 12V DC Operation • 10A Relay Output • Heating & Cooling Modes • Waterproof NTC Sensor The XH-W1219 12V Digital Temperature Controller Module is a high-precision thermostat controller designed for automatic temperature monitoring and control in heating and cooling applications. Powered by 12V DC, this module features a dual LED display that simultaneously shows the current temperature and set temperature, making operation more convenient than the popular W1209 controller. Equipped with a waterproof NTC 10K temperature sensor, the XH-W1219 accurately measures temperatures from -50°C to +110°C. The onboard 10A relay output can directly control heaters, cooling fans, pumps, compressors, and other electrical loads within its rated capacity. The module is based on a Nuvoton microcontroller, which stores all settings in non-volatile memory, ensuring that user configurations are retained even after power loss. It supports both Heating (H) and Cooling (C) modes, adjustable hysteresis, temperature calibration, delay start, and high-temperature alarm functions. Ideal for incubators, aquariums, refrigeration systems, greenhouse automation, HVAC equipment, battery temperature monitoring, and industrial automation, the XH-W1219 provides reliable and accurate temperature control in a compact module. ⭐ Features Dual LED display for simultaneous temperature and setpoint display Operates on 12V DC High-accuracy waterproof NTC 10K temperature sensor Temperature control range from -50°C to +110°C Supports Heating and Cooling modes Built-in 10A relay output Adjustable temperature hysteresis Temperature calibration function Adjustable relay delay start High-temperature alarm function Stores settings in non-volatile memory Easy configuration using three push buttons High measurement accuracy (0.1°C resolution) Based on a Nuvoton MCU Compact PCB design with mounting holes 📋 Technical Specifications Product Type: Digital Temperature Controller Module Model: XH-W1219 Operating Voltage: 12V DC Display: Dual 3-Digit LED (Current Temperature & Set Temperature) Temperature Sensor: Waterproof NTC 10K Thermistor Temperature Control Range: -50°C to +110°C Temperature Resolution: 0.1°C Temperature Calibration: -10°C to +10°C Relay Output: 10A (Maximum) Relay Contact Rating: Up to 120VAC 10A / 14VDC 10A Control Modes: Heating (H) / Cooling (C) Hysteresis Setting: 0.1°C to 30°C Delay Start: 0–10 Minutes High Temperature Alarm: -49°C to +110°C Memory: Non-Volatile Parameter Storage Controller: Nuvoton MCU Dimensions: Approx. 60 × 44 × 17 mm Weight: Approx. 22 g (may vary slightly by manufacturer) ⚙️ Parameter Functions Parameter Description P0 Heating (H) / Cooling (C) Mode Selection P1 Temperature Hysteresis (Return Difference) P2 Maximum Temperature Limit P3 Minimum Temperature Limit P4 Temperature Calibration P5 Relay Delay Start (0–10 Minutes) P6 High Temperature Alarm Setting 🔧 Applications Suitable for: Egg Incubators Aquarium Temperature Control Greenhouse Automation Refrigeration Systems Cooling Fans Heating Elements Water Heaters HVAC Systems Fermentation Equipment Battery Temperature Monitoring Industrial Automation Laboratory Equipment DIY Electronics Smart Home Projects Arduino & Raspberry Pi Projects (Relay Interface) 📦 Package Includes 1 × XH-W1219 12V Digital Temperature Controller Module 1 × Waterproof NTC 10K Temperature Sensor ⚠️ Note Operates only on 12V DC. The relay output is rated for 10A maximum. For higher-power loads, use an external contactor or relay. Sensor cable can be extended if required using appropriate wiring. Product appearance or PCB color may vary slightly depending on the manufacturing batch.
ESP32-C3 Super Mini Development Board With Headers Pins
[ESP Modules] Ultra Compact • Wi-Fi & BLE 5.0 • USB Type-C • Perfect for IoT & Embedded Projects The ESP32-C3 Super Mini Development Board is a compact, feature-rich development board built around the powerful ESP32-C3 SoC from Espressif. Powered by a 32-bit RISC-V single-core processor running at up to 160MHz, it combines 2.4GHz Wi-Fi, Bluetooth 5.0 Low Energy (BLE), and low-power operation in an ultra-small form factor. Designed for IoT, smart home, wireless communication, automation, and embedded system development, the ESP32-C3 Super Mini offers 4MB Flash memory, 400KB SRAM, multiple GPIOs, ADC, PWM, UART, SPI, and I2C interfaces for connecting sensors, displays, relays, and other peripherals. The onboard USB Type-C interface simplifies programming and power supply, while the built-in USB-to-Serial functionality enables quick firmware uploading without requiring additional programmers. Fully compatible with Arduino IDE, ESP-IDF, PlatformIO, and MicroPython, it is suitable for beginners, students, makers, and professional developers. Its ultra-compact breadboard-friendly design makes it ideal for portable and space-constrained projects where performance, wireless connectivity, and energy efficiency are essential. Note: Programming, software configuration, driver installation, firmware flashing, and coding-related issues are not covered under return or replacement. Users are expected to troubleshoot software-related issues independently. ⭐ Features Powerful ESP32-C3 32-bit RISC-V processor CPU frequency up to 160MHz Built-in 2.4GHz Wi-Fi (802.11 b/g/n) Integrated Bluetooth 5.0 Low Energy (BLE) Ultra-compact Super Mini design Breadboard-friendly layout USB Type-C interface for programming and power 4MB onboard Flash memory 400KB SRAM Multiple GPIO, ADC, PWM, UART, SPI & I2C interfaces Low power consumption with Deep Sleep mode Onboard programmable LED Compatible with Arduino IDE, ESP-IDF, PlatformIO & MicroPython Ideal for IoT, automation, robotics, and wireless applications 📋 Technical Specifications Product Type: Development Board Board Model: ESP32-C3 Super Mini Microcontroller: ESP32-C3 Processor Architecture: 32-bit RISC-V CPU Frequency: Up to 160MHz Core: Single Core Flash Memory: 4MB SRAM: 400KB Wi-Fi Standard: IEEE 802.11 b/g/n (2.4GHz) Bluetooth: Bluetooth 5.0 Low Energy (BLE) Operating Voltage: 3.3V Input Voltage: 5V via USB Type-C or 3.3V External USB Interface: USB Type-C GPIO: Multiple Digital GPIO Pins Analog Input: Up to 6 ADC Channels PWM: Supported UART: Supported SPI: Supported I2C: Supported USB-to-Serial: Onboard Onboard LED: User Programmable (GPIO8) Power Consumption: Ultra Low (Deep Sleep ≈ 43µA) Dimensions: Approx. 22.5 × 18 mm Headers: Pre-Soldered 🔧 Applications Suitable for: Internet of Things (IoT) Smart Home Automation Wireless Sensor Networks Home Automation Systems Bluetooth Low Energy Devices Wi-Fi Enabled Controllers Robotics Projects Data Logging Systems Remote Monitoring Industrial Automation Portable Embedded Devices Educational Learning DIY Electronics Projects Wearable Electronics Rapid Prototyping 📦 Package Includes 1 × ESP32-C3 Super Mini Development Board Pin Headers ⚠️ Note Programming, firmware installation, software configuration, and driver-related issues are not covered under warranty, return, or replacement. Please verify board compatibility and install the appropriate development environment before programming. Soldered and non-soldered header pin depend on stock
10-in-1 USB & Type-C Digital Tester – IPS Voltmeter, Ammeter, Impedance & Capacity Meter
[Ammeter and Voltmeter] The 10-in-1 USB & Type-C Digital Power Tester is a multifunction USB measurement instrument developed for engineers, technicians, hobbyists, and electronics enthusiasts. It accurately monitors USB charging performance while providing comprehensive electrical measurements for USB-A and USB Type-C devices. Equipped with a bright IPS true-color LCD display, the tester simultaneously displays ten important charging parameters including Voltage, Current, Power, Capacity (mAh), Energy (mWh), Cable Resistance, Temperature, Charging Time, D+ Voltage, and D− Voltage. The tester features both USB-A and USB Type-C input/output interfaces, allowing compatibility with traditional USB chargers as well as modern USB-C Power Delivery devices. It supports testing of fast chargers, mobile phones, tablets, laptops, power banks, USB cables, and various USB-powered electronics. With support for measurements up to 150W and 5A, this tester is suitable for high-power USB-C PD chargers while consuming less than 20mA of operating current. Built-in control buttons allow users to switch display modes, perform fast-charge diagnostics, and manage measurement functions easily. Its compact design makes it an excellent tool for electronics repair, charger verification, cable testing, battery capacity measurement, laboratory work, and DIY electronics projects. 🔹 Key Features Dual Interface: USB-A & USB Type-C Input/Output Supports USB PD and Fast Charging IPS Full Color LCD Display Measures Voltage, Current and Power Capacity (mAh) & Energy (mWh) Measurement Cable Resistance (Impedance) Measurement Internal Temperature Monitoring USB D+ / D− Voltage Detection Charging Timer Function High Accuracy Measurement Low Self Power Consumption Compact Portable Design Easy Operation with Dedicated Function Buttons 🔹 Technical Specifications Product Type: USB Digital Power Tester Display: IPS True Color LCD Input Interface: USB-A / USB Type-C Output Interface: USB-A / USB Type-C Maximum Power Measurement: 150W Maximum Current: 5A Voltage Measurement: USB Standard & USB-C PD Power Measurement Range: 0–150W Current Measurement: Up to 5A Capacity Measurement: mAh Energy Measurement: mWh Impedance Measurement Range: 1–999.9Ω Temperature Measurement: 0°C to 80°C USB D+ Voltage Range: 0–2.99V USB D− Voltage Range: 0–2.99V Timer Range: 999 Hours 59 Minutes Refresh Rate: Approximately 500ms Self Power Consumption: <20mA Operating Buttons: Mode / Power Dimensions: 76.9 × 38 × 11 mm 🔹 Applications This USB tester is suitable for: USB charger testing USB-C PD charger testing Power bank capacity testing Mobile charger verification Fast charging protocol diagnostics USB cable resistance testing Laptop USB-C charger testing Electronics repair DIY electronics projects Laboratory measurements Battery charging analysis Quality inspection of USB power supplies 🔹 Package Includes 1 × 10-in-1 USB & Type-C Digital Power Tester 🔹 Frequently Asked Questions (FAQ) What does "10-in-1" mean? It measures ten important parameters: Voltage, Current, Power, Capacity, Energy, Impedance, Temperature, Charging Time, D+ Voltage, and D− Voltage. Does it support both USB-A and USB Type-C? Yes. It features both USB-A and USB Type-C input and output interfaces. What is the maximum power it can measure? Up to 150W. What is the maximum current supported? Up to 5A. Can it test USB-C laptop chargers? Yes. It supports high-power USB-C PD chargers up to 150W. Can it measure charging cable quality? Yes. It measures cable impedance from 1Ω to 999.9Ω. Does it display temperature? Yes. It includes an internal temperature sensor with a range of 0°C to 80°C. Does it require batteries? No. It is powered directly from the connected USB source. Can it measure power bank capacity? Yes. It records charging capacity in mAh and mWh. Does it support fast charging protocols? Yes. It can monitor USB D+ and D− voltages, helping identify fast charging protocol handshakes.
DHT11 Digital Temperature and Humidity Sensor Module 3.3V-5V for Arduino & Raspberry Pi
[Temperature Sensor] The DHT11 Digital Temperature and Humidity Sensor Module is a reliable and cost-effective sensor designed to measure ambient temperature and relative humidity. It combines a capacitive humidity sensing element and a thermistor with a built-in digital signal processing unit, providing calibrated digital output directly to microcontrollers. In addition, the DHT11 offers stable performance and excellent long-term reliability, making it suitable for environmental monitoring and automation applications. As a result, it is widely used in weather stations, smart home systems, greenhouse monitoring, HVAC systems, and educational electronics projects. Because the module includes the required pull-up resistor, interfacing with microcontrollers becomes simple and straightforward. Furthermore, only three connections are required: VCC, GND, and Data Output. The sensor operates from a wide voltage range of 3.3V to 5.5V DC, ensuring compatibility with Arduino, Raspberry Pi, ESP32, STM32, NodeMCU, and other development boards. Moreover, readily available libraries and example codes allow quick integration into projects. The DHT11 utilizes advanced digital signal acquisition technology and dedicated temperature-humidity sensing techniques to ensure accurate and dependable measurements. 🔹 Key Features Measures temperature and humidity simultaneously Calibrated digital signal output Low power consumption High reliability and long-term stability Capacitive humidity sensing technology Built-in pull-up resistor on module Compatible with Arduino, ESP32, Raspberry Pi, and STM32 Simple 3-wire interface Easy integration into IoT projects Compact and lightweight design 🔹 Technical Specifications Sensor Model: DHT11 Operating Voltage: 3.3V – 5.5V DC Output Type: Digital Serial Output Humidity Measurement Range: 20%RH – 90%RH Humidity Accuracy: ±5%RH Humidity Resolution: 1%RH Temperature Measurement Range: 0°C – 50°C Temperature Accuracy: ±2°C Temperature Resolution: 1°C Sampling Rate: 1Hz (One Reading Per Second) Long-Term Stability: < ±1%RH/Year Interchangeability: Fully Interchangeable Sensor Technology: Capacitive Humidity Sensor + Thermistor 🔹 Pin Configuration Pin 1 (VCC): 3.3V – 5.5V DC Power Supply Pin 2 (DATA): Digital Serial Data Output Pin 3 (GND): Ground 🔹 Applications This sensor module is suitable for: Arduino projects Raspberry Pi projects ESP32 projects IoT systems Weather monitoring stations Smart home automation Greenhouse monitoring HVAC control systems Environmental monitoring Educational electronics projects 🔹 Package Includes 1 × DHT11 Digital Temperature and Humidity Sensor Module
Micro USB 5V 1A Step-Up Boost Converter Power Bank Charging Module for 3.7V Lithium Battery
[Li-ion Rechargeable Battery Charger, Lithium Battery Protection Board] The Micro USB 5V 1A Step-Up Boost Converter Power Bank Charging Module is a versatile and reliable solution for building portable power banks and battery-powered electronic projects. Designed for use with a single 3.7V lithium-ion battery, the module integrates battery charging, protection circuitry, and a high-efficiency boost converter on a single compact PCB. In addition, the onboard boost converter efficiently converts the battery voltage to a regulated 5V USB output, making it suitable for charging smartphones, microcontroller projects, portable gadgets, and USB-powered devices. As a result, users can create compact and dependable portable power solutions with minimal external components. Because of its integrated protection functions, the module safeguards the battery against overcharging, over-discharging, and short circuits. Furthermore, LED status indicators provide clear visual feedback regarding charging and operating conditions. The compact design allows easy integration into custom battery packs, DIY power banks, portable electronics, and embedded systems. Moreover, the Micro USB charging interface ensures compatibility with widely available charging cables and adapters. 🔹 Key Features Micro USB charging interface Integrated lithium battery charging circuit Built-in 5V step-up boost converter Stable 5V USB output Supports single-cell 3.7V lithium-ion batteries Overcharge protection Over-discharge protection Short-circuit protection High conversion efficiency LED charging status indicators Compact and lightweight design 🔹 Technical Specifications Product Type: Power Bank Charging Module Charging Interface: Micro USB Input Voltage: 3.7V Lithium Battery Output Voltage: 5V USB Standard Maximum Output Current: 1A Supported Battery Type: Single Cell Lithium-Ion Battery (3.7V) Efficiency: Up to 92% Quiescent Current: Less than 100µA Charging Protection: Overcharge, Over-discharge, Short Circuit Protection Overcharge Protection Voltage: 4.2V Over-discharge Protection Voltage: 2.5V Charging Cut-off Current: 50mA Module Dimensions: Approx. 36mm × 17mm × 7mm PCB Thickness: 1.6mm Operating Temperature: -40°C to +85°C Status Indication: LED Charging Indicators 🔹 Applications This charging module is suitable for: DIY power banks Portable USB chargers Lithium battery projects Arduino power supplies ESP32 and IoT devices Portable electronics Rechargeable battery systems USB-powered gadgets 🔹 Package Includes 1 × Micro USB 5V 1A Step-Up Boost Converter Lithium Battery Charging and Protection Module
TP4056 1A Li-Ion Lithium Battery Charging Module with Micro USB 3.7V Charger Board
[Li-ion Rechargeable Battery Charger, Lithium Battery Protection Board] The TP4056 1A Li-Ion Lithium Battery Charging Module – Micro USB is a compact and efficient charging board designed for charging single-cell 3.7V lithium-ion and lithium polymer batteries. It features an onboard Micro USB connector, allowing direct charging from USB power sources such as computers, adapters, and power banks. In addition, the module supports external power input through the IN+ and IN- pads, making it suitable for custom battery charging applications and DIY electronics projects. As a result, users can easily integrate the module into portable devices and battery-powered systems. Because of its compact size and lightweight design, the TP4056 module is ideal for space-limited applications. Furthermore, the onboard charging management IC provides stable charging performance with high accuracy and reliable battery protection. The charging current is set to 1A by default, but it can also be adjusted by changing the onboard programming resistor. Moreover, the module includes dual LED indicators for charging status and full-charge indication. This charging module is widely used in power banks, DIY battery chargers, portable electronics, IoT devices, robotics systems, and rechargeable battery projects. 🔹 Key Features TP4056 lithium battery charging IC Onboard Micro USB input interface Suitable for 3.7V Li-Ion and LiPo batteries Default 1A charging current Adjustable charging current support Dual LED charging status indicators Compact and lightweight design High charging accuracy and stable performance Easy integration into DIY projects 🔹 Technical Specifications Product Type: Lithium Battery Charging Module Charging IC: TP4056 Input Interface: Micro USB Input Voltage: 5V DC Battery Type: 3.7V Li-Ion / LiPo Battery Default Charging Current: 1A Adjustable Current Range: 100mA – 1000mA Charging Method: Constant Current / Constant Voltage Charging Indicators: Charging LED & Full Charge LED Mounting Type: PCB Module Body Material: FR4 PCB 🔹 Applications This TP4056 charging module is suitable for many electronic applications, including: DIY power banks Rechargeable battery projects Portable electronics Robotics systems IoT devices Battery charging circuits Arduino projects DIY electronics projects 🔹 Package Includes 1 × TP4056 1A Li-Ion Lithium Battery Charging Module – Micro USB
Out of stock1.3 Inch I2C IIC 128×64 OLED Display Module – White
[LED/LCD Display Module] The 1.3 Inch I2C 128×64 OLED Display Module is a compact, high-contrast display designed for Arduino, ESP32, NodeMCU, Raspberry Pi, and other microcontroller-based projects. This module uses OLED (Organic Light Emitting Diode) technology, providing bright white pixels with excellent contrast and wide viewing angles. Powered by the SSH1106 controller chip, the display offers smooth graphics rendering and reliable performance. With a resolution of 128×64 pixels, it can display text, graphics, icons, and sensor data clearly even in small embedded systems. The module communicates using the I2C (IIC) interface, requiring only 4 pins (VCC, GND, SDA, SCL), which helps save valuable GPIO pins on your microcontroller. It operates within a voltage range of 3.3V to 5V, making it compatible with most development boards. Unlike traditional LCD displays, OLED displays do not require a backlight because each pixel emits its own light. This results in lower power consumption, better contrast, and faster response times. Due to its compact size, lightweight design, and simple wiring, the display module is ideal for IoT devices, sensor monitors, battery indicators, portable electronics, robotics projects, and DIY electronics applications. ⭐ Features 1.3 Inch OLED Display Module 128 × 64 pixel resolution White pixel display SSH1106 display controller I2C / IIC communication interface Requires only 4 pins High contrast and wide viewing angle Low power consumption Compatible with Arduino, ESP32, NodeMCU, Raspberry Pi Ideal for embedded and IoT projects 🔧 Technical Specifications Display Size: 1.3 inch Resolution: 128 × 64 pixels Controller Chip: SSH1106 Display Area: 34.5 × 19 mm Interface Type: IIC / I2C Pixel Color: White Driving Voltage: 3.3V – 5V Operating Temperature: -40°C to 70°C Physical Dimensions Length: 35.5 mm Width: 33.5 mm Height: 4 mm Weight: 7 g 📦 Package Includes 1 × 1.3 Inch 128×64 OLED Display Module (White)
3.7V 4.2V Battery Type-C Charger Board DC-DC Step-Up Boost Module
[Lithium Battery Protection Board] The 3.7V 4.2V Battery Type-C Charger Board DC-DC Step-Up Boost Module is a compact power management module designed for single lithium batteries. It combines a charging circuit and a DC-DC step-up boost converter, allowing the battery to power devices that require higher voltage outputs. This module uses a USB Type-C interface, which provides convenient and reliable power input. As a result, it is compatible with many modern power adapters and USB chargers. In addition, the onboard boost circuit can increase the battery voltage and deliver stable output. Because of this feature, the module can power small electronics such as portable gadgets, DIY power banks, and IoT devices. The board also includes several protection functions. For example, it protects the battery from over-charging, over-discharging, short circuits, and overheating. Therefore, the battery can operate safely and maintain a longer service life. Thanks to its ultra-small and lightweight design, the module is easy to integrate into compact electronic devices and DIY electronics projects. 🔹 Key Features Supports lithium battery charging and discharging USB Type-C power input Integrated DC-DC step-up boost converter Adjustable boost output voltage Constant current and constant voltage charging Built-in over-temperature protection Charging status and fault indicator Ultra-compact and lightweight design 🔹 Technical Specifications Parameter Specification Chipset TP4056 Input Voltage 4.2V – 5.5V Output Voltage 4.2V – 24V Adjustable Maximum Power 5W Operating Temperature -40°C to 80°C Operating Humidity 5% – 95% RH Module Size 23.4 × 18 mm Weight ~5 g 🔹 Applications This module can be used in many portable electronics projects, such as: DIY power banks Portable electronics IoT devices Robotics projects Emergency backup power systems Battery-powered gadgets 🔹 Package Includes 1 × 3.7V 4.2V Battery Type-C Charger Board DC-DC Step-Up Boost Module
ESP32 Development Board with WiFi & Bluetooth – CH340C USB Type-C
[ESP Modules] The ESP32 Development Board with WiFi & Bluetooth (CH340C, Type-C) is a powerful and versatile microcontroller board designed for modern wireless and IoT applications. It features a dual-core processor and integrated 2.4GHz WiFi and Bluetooth (Classic + BLE) connectivity. This board includes an onboard CH340C USB-to-Serial converter, which allows easy programming and communication without requiring an external crystal oscillator. The USB Type-C port provides a stable and reversible connection for power and data. With a wide range of GPIO pins and peripherals such as ADC, DAC, PWM, UART, SPI, and I2C, this board is perfect for building home automation systems, smart devices, IoT nodes, robotics controllers, sensor networks, web servers, and wireless projects. It is fully compatible with Arduino IDE, ESP-IDF, and MicroPython, making it suitable for beginners, students, and professional developers. 🔹 Key Features Based on ESP32 dual-core microcontroller Built-in WiFi 802.11 b/g/n and Bluetooth v4.2 (Classic + BLE) Onboard CH340C USB-to-Serial converter (no external crystal required) Modern USB Type-C connector for power and programming Dual-core CPU up to 240 MHz for high-performance applications Multiple GPIO pins with ADC, DAC, PWM support Supports Arduino IDE, ESP-IDF, and MicroPython Low-power modes including deep sleep for battery-powered projects Compact design with breadboard-friendly layout Ideal for IoT, automation, robotics, smart home, and DIY electronics 🔹 Technical Specifications Microcontroller: ESP32 CPU: Dual-core Tensilica LX6, up to 240 MHz Flash Memory: 4 MB (typical, may vary by batch) SRAM: 520 KB Wireless Connectivity: WiFi: 2.4 GHz, 802.11 b/g/n Bluetooth: v4.2, Classic + BLE USB Interface: USB Type-C USB-to-Serial Chip: CH340C Operating Voltage: 3.3 V Input Voltage: 5 V via USB Logic Level: 3.3 V GPIO Pins: 30+ multifunction pins Peripherals: ADC, DAC, PWM, UART, SPI, I2C, I2S Clock Frequency: Up to 240 MHz Programming Support: Arduino IDE, ESP-IDF, MicroPython Onboard Components: Reset & Boot buttons, voltage regulator, status LEDs Form Factor: Standard ESP32 Dev Board size 🔹 Applications Internet of Things (IoT) projects Home and industrial automation Smart home devices Robotics and motor control Wireless sensor networks Web servers and cloud-connected devices Educational and training projects DIY electronics and prototyping 🔹 Package Contents 1 × ESP32 Development Board with WiFi & Bluetooth (CH340C, USB Type-C)
QC3.0 PD 2.0 Power Bank Dual Type-C Port Two-way Fast Charging Mobile Power Bank Module
[Lithium Battery Protection Board] 📝 Description Upgrade your portable power solutions with this advanced QC3.0 PD 2.0/3.0 Fast Charging Power Bank Module, engineered for high-performance mobile power systems and professional DIY applications. The motherboard features 5 default USB interfaces — Type-C, Lightning, Micro-USB, Type-A1, and Type-A2, along with a dedicated DC input port (charge-only, no discharge) supporting 5V–12V input. This multi-interface design ensures maximum compatibility with smartphones, tablets, laptops, and other USB-powered devices. 🔌 Port & Charging Capabilities Type-C Port supports bi-directional fast charging, allowing both input and output operation. Input protocols: AFC / FCP / SCP / VOOC / PD2.0 / PD3.0 Output protocols: PPS / PD2.0 / PD3.0 / AFC / FCP / QC2.0 / QC3.0 / QC3+ / SCP Lightning Port supports PD2.0 fast-charging input Micro-USB Port supports AFC / FCP / SCP fast-charging input Type-A1 & Type-A2 Ports support Apple / AFC / FCP / VOOC / QC2.0 / QC3.0 / QC3+ / SCP fast-charging output DC Port supports 5–12V input only (charging function, no output) ⚡ Fast-Charging Performance Input Voltage Support: 5V / 9V / 12V / 15V / 20V PPS Output: 3.3V–21V / 3A PD2.0 / PD3.0 Output: 5V ⎓ 3A 9V ⎓ 3A 12V ⎓ 3A 15V ⎓ 3A 20V ⎓ 5A QC2.0 Output: 5V ⎓ 3A / 9V ⎓ 3A / 12V ⎓ 3A QC3.0 Output: 5V–12V (200mV step adjustment) AFC Output: 5V ⎓ 3A / 9V ⎓ 2A / 12V ⎓ 2A FCP Output: 5V ⎓ 3A / 9V ⎓ 2A / 12V ⎓ 1.5A SCP Output: 5V ⎓ 4.5A / 10V ⎓ 2.2A VOOC Output: 5V ⎓ 4A 🔋 Battery & Power Options Powered by 18650 or Li-polymer battery packs, the module is available in three high-power variants: 3S – 65W (GXJA0707-001) 4S – 100W (GXJA0707-002) 5S – 100W (GXJA0707-003) The built-in digital display provides real-time monitoring of voltage, current, and power status, enabling precise control and safe operation. Compact, efficient, and feature-rich, this power bank module is ideal for DIY high-capacity power banks, portable charging stations, laptop backup batteries, and custom lithium battery systems up to 25,000mAh. ⭐ Key Features ✔ Multi-Port Design: Type-C, Lightning, Micro-USB, 2× USB-A, DC input✔ Bi-Directional Type-C Fast Charging (Input & Output)✔ Supports PPS, PD2.0/3.0, QC2.0/3.0, QC3+, AFC, FCP, VOOC, SCP✔ High Power Output: 65W (3S) / 100W (4S & 5S)✔ Digital Display for Real-Time Monitoring✔ Compatible with 18650 & Li-polymer Battery Packs✔ Compact & Portable PCB Design✔ Ideal for DIY Power Banks & Professional Builds 📦 Package Includes 1 × QC3.0 PD 2.0/3.0 Power Bank Fast Charging Module(Select Variant: 3S 65W / 4S 100W / 5S 100W) 1 × Integrated Digital Display (On-Board)
USB Type-A Male Connector Plug (Solder Type) – DIY USB 2.0 Charging & Data Cable Connector
[USB Socket] 📖 Product Description Build your own USB cables easily with this USB Type-A male connector plug.It’s perfect for DIY cable making, USB repairs, and electronic projects.This connector features a strong nickel-plated metal shell, 4 solder pins, and a standard USB 2.0 interface for reliable performance in both power and data transmission. Use it to repair broken cables, create custom USB extensions, or prototype devices that connect to any USB-compatible port (like power banks, chargers, Arduino boards, and embedded systems). Please check our others items: Click Here ⚙️ Key Features ✅ Standard USB Type-A male plug – fits all USB 2.0 Type-A ports ✅ DIY solder type design – easy to connect wires securely ✅ Durable metal housing – ensures longevity and protection ✅ Stable power & data transfer – ideal for charging and communication ✅ Perfect for makers, technicians, and electronic enthusiasts 📐 Technical Specifications Specification Details Connector Type USB Type-A Male Interface Standard USB 2.0 Pin Count 4 Pins Mount Type Cable / Solder Type Shell Material Nickel-Plated Metal Insulator Material High-Temperature Plastic Color Silver with White Insulator Rated Voltage 5V DC Rated Current Up to 2A Operating Temperature −20 °C to +70 °C Dimensions Approx. 20 mm × 18 mm × 4.5 mm Weight Approx. 2 g 💡 Applications DIY USB charging cables Custom USB extension cables USB data and power projects Embedded systems, Arduino, Raspberry Pi Replacement connector for broken USB plugs 📦 Package Includes 1 × USB Type-A Male Connector Plug (Solder Type)
Type-C USB 5V 1A Step-Up Booster – Lithium Battery Charging and Protection Module for Power Bank
[Lithium Battery Protection Board] Overview of this type-c usb 5V 1A power bank charging module board Introducing the Type-C USB 5V 1A Step-Up Boost Converter Power Bank Charging module board at best price in India. A versatile and important component for modern electronic project. This type c power bank charger offers efficient and reliable charging & ensure your device stay powered up. Designed for optimal performance, the Type-C USB 5V 1A power bank charging module is perfect for DIY enthusiasts and professionals alike. Experience seamless integration and enhanced functionality with this advanced charging solution. The Type-C charging module boasts an impressive step-up converter that efficiently boosts voltage. With a 5V 1A output, it guarantees stable power delivery for various devices. This Type-C USB 5V 1A Step-Up Converter charging module is engineered for safety and reliability. Integrated charging protection safeguards your devices from overcharging and short circuits, providing peace of mind. Compact and user-friendly, the type c power bank charger is easy to incorporate into any project. Its Type-C interface ensures broad compatibility with contemporary devices. Whether you’re working on portable power banks or custom electronics, this charging module is indispensable. Enhance your projects with the robust and dependable Type-C USB 5V 1A power bank charging module. Features Input and Output Specifications: The module accepts input from a USB Type-C port at 5V. It outputs 1A current suitable for charging devices efficiently. Step-Up Boost Converter: The device converts a lower voltage to a higher one, ensuring stable power supply. This feature allows for charging even when the input voltage is below the required level. Integrated Charging Protection: The module includes built-in protection to prevent overcharging and overheating. This ensures the safety and longevity of both the power bank and connected devices. Compact and Portable Design: Its small size makes it highly portable and easy to integrate into DIY projects. The compact form factor allows for convenient carrying and use on the go. LED Indicator Lights: The module features LED lights indicating charging status and power levels. This visual feedback helps users monitor the charging process effortlessly. Specification Specification Details Input Voltage 3.7V Output Voltage 5V USB Standard Output Current 1A (Maximum) Charging Interface Type-C USB Charging Protection Overcharge, Over-discharge, Short Circuit Efficiency Up to 92% Quiescent Current Less than 100uA Battery Type Supported Single Cell Lithium-Ion Battery (3.7V) Module Size 36mm x 17mm x 7mm (Approx.) Working Temperature Range -40°C to +85°C Indicator Lights LED Indicators for Charging Status PCB Thickness 1.6mm Overcharge Protection Voltage 4.2V Over-discharge Protection Voltage 2.5V Short Circuit Protection Yes Charging Cut-off Current 50mA Package Includes: 1 x Type-C USB 5V 1A Step-Up Booster – Lithium Battery Charging and Protection Module