All products · 65 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
26650 Battery Holder / Battery Spacer 2×1 – 26.3mm Bore Diameter
[Lithium Battery Holder] 26650 Battery Holder / Battery Spacer 2×1 – 26.3mm Bore Diameter The 26650 Battery Holder / Battery Spacer 2×1 is a cylindrical battery spacer designed to securely arrange 26650 lithium-ion battery cells while building multi-cell battery packs. Made from flame-retardant ABS+PC material, it provides a strong and stable structure while allowing air circulation around the cells. The holder features interlocking slots on the edges, allowing multiple spacers to be joined together to create different battery-pack sizes and configurations. After welding nickel strips, the assembled battery pack can achieve a solid and reliable structure without requiring additional connecting hardware. ⭐ Key Features Designed for 26650 cylindrical lithium-ion cells 2 × 1 configuration 26.3mm bore diameter Made from flame-retardant ABS+PC material High-temperature resistant construction Crack-resistant design Interlocking slots for connecting multiple spacers Allows flexible battery-pack configurations Provides mechanical support for battery cells Helps maintain proper spacing between cells Suitable for high-current battery-pack construction Helps improve battery-pack stability and reliability Allows airflow around the cells for heat dissipation 📋 Technical Specifications Product Type: Battery Holder / Battery Spacer Compatible Cell: 26650 cylindrical battery Configuration: 2 × 1 Number of Cells: 2 Bore Diameter: 26.3mm Material: Flame-retardant ABS+PC Construction: Interlocking modular design Mounting: Multiple spacers can be joined together Application: Lithium battery pack assembly Cell Type: Cylindrical Li-ion cells 🔧 Applications 26650 lithium-ion battery packs E-bike battery packs Electric scooter battery packs Electric vehicle battery packs Power-tool battery packs DIY high-current battery packs UPS battery systems Solar energy storage packs Portable power stations Robotics battery packs Custom lithium battery assemblies 🛠️ How to Use The spacer is designed to hold two 26650 cells in a 2×1 arrangement. Multiple spacers can be connected through the slots provided around the edges to create larger battery-pack configurations. For a complete battery pack: Cell → Spacer → Nickel Strip Welding → Additional Spacers → Battery Pack For mechanical support, spacers can be positioned at the top and bottom of the cells. Important: For each individual battery cell, 2 spacers are recommended—one at the top and one at the bottom. 💡 Advantages Simple Assembly: Easy to arrange cylindrical cells. Flexible Design: Multiple spacers can be interconnected to create different pack shapes. Strong Construction: Helps keep cells firmly positioned. Heat Dissipation: Provides spacing between cells and allows airflow. Reliable Battery Pack: Helps make the completed pack mechanically stable. Suitable for Complex Packs: Useful for custom battery configurations, including e-bike and high-current applications. ⚠️ Important Notes This product is only a battery holder/spacer; batteries are not included. The 26.3mm bore is intended for compatible 26650 cells. Check your actual cell diameter before purchase. Do not force oversized cells into the holder. Battery cells should be properly insulated and securely assembled. Use suitable nickel strip and an appropriate spot-welding method. Use a suitable BMS/protection system for the completed lithium battery pack. Battery cells should be properly matched before assembling a multi-cell pack. 2 spacers are recommended per individual cell, one on each end. Keep the battery assembly away from excessive heat, moisture and physical damage. 📦 Package Includes 1 × 26650 Battery Holder / Battery Spacer – 2×1, 26.3mm Bore Diameter Note: Battery cells, nickel strips and BMS are not included.
Blivex LFP32700 3.2V 6Ah LiFePO₄ Rechargeable Battery Cell
[LiFePO4 Battery Cell] 🔋 Blivex LFP32700 3.2V 6Ah LiFePO₄ Rechargeable Battery Cell High Capacity • Long Cycle Life • High Discharge Performance • Ideal for Energy Storage & Electric Vehicles The Blivex LFP32700 3.2V 6Ah LiFePO₄ Rechargeable Cell is a premium cylindrical lithium iron phosphate (LiFePO₄) battery designed for high-performance energy storage and power applications. Featuring a nominal voltage of 3.2V, 6Ah capacity, and up to 18A continuous discharge current, this cell delivers stable output voltage, excellent safety, and long service life. The specification identifies the product as a LFP32700-6.0Ah LiFePO₄ cylindrical rechargeable cell. Manufactured with a robust steel enclosure, the battery offers excellent resistance to vibration, shock, and harsh operating conditions while maintaining low self-discharge and high energy efficiency. It is suitable for battery packs used in electric vehicles, solar energy storage systems, portable power stations, communication backup systems, robotics, and industrial equipment. The datasheet also highlights its sturdy steel case, high capacity, long cycle life, stable output voltage, and good high/low temperature performance. Datasheet : Click Here To Open ⭐ Features High-capacity 6Ah LiFePO₄ cylindrical cell Nominal voltage of 3.2V Excellent cycle life of 2000+ cycles High continuous discharge capability up to 18A (3C) Peak pulse discharge current up to 30A (5C) Low internal resistance (≤8mΩ) Stable output voltage Low self-discharge High safety and thermal stability Sturdy pressure-resistant steel casing Excellent vibration and shock resistance Suitable for battery pack assembly 📋 Technical Specifications Brand: Blivex Model: LFP32700-6.0Ah Battery Chemistry: Lithium Iron Phosphate (LiFePO₄) Battery Type: Cylindrical Rechargeable Cell Nominal Voltage: 3.2V Nominal Capacity: 6.0Ah Energy Density: 142Wh/kg Internal Resistance: ≤8mΩ (AC, 1000Hz) Limited Charge Voltage: 3.65V Charge Method: CC/CV Standard Charge Current: 0.5C Maximum Charge Current: 1C Charge Cut-off Current: 0.3A Discharge Cut-off Voltage: 2.0V Standard Discharge Current: 6A (1C) Maximum Continuous Discharge Current: 18A (3C) Maximum Pulse Discharge Current: 30A (10 seconds) Cycle Life: 1500 Cycles (25°C, 100% DOD) Charge Temperature: 0°C to 60°C Recommended Charge Temperature: 15°C to 40°C Discharge Temperature: -30°C to 60°C Recommended Discharge Temperature: 15°C to 40°C Cell Diameter: 32.2 ± 0.3mm Cell Height: 70.5 ± 0.3mm Weight: 135 ± 5g These specifications are taken from the manufacturer's datasheet. 🔧 Applications Suitable for: Solar Energy Storage Systems Portable Power Stations Home Energy Storage UPS Backup Systems Electric Scooters Electric Tricycles Electric Four-Wheel Vehicles Electric Logistics Vehicles Battery Pack Manufacturing Communication Backup Power Industrial Energy Storage Robotics Projects DIY LiFePO₄ Battery Packs Marine & RV Power Systems The manufacturer lists applications including electric two-wheel vehicles, tricycles, logistics vehicles, special vehicles, portable energy storage, household energy storage, industrial energy storage, and communication backup power. 📦 Package Includes 1 × Blivex LFP32700 3.2V 6Ah LiFePO₄ Rechargeable Battery Cell ⚠️ Note Use only with a compatible LiFePO₄ charger and an appropriate Battery Management System (BMS). Do not short-circuit, crush, puncture, disassemble, or expose the battery to fire or excessive heat. Store the battery in a cool, dry place when not in use. Product appearance may vary slightly depending on the manufacturing batch. The datasheet includes additional handling, storage, and safety precautions for transportation, storage, and battery use.
Single Side Adhesive Barley Insulation Paper Roll 65mm x 1 Meter for Lithium Battery Packs
[Insulation Paper] The Single Side Adhesive Barley Insulation Paper Roll is a premium electrical insulation material widely used in lithium-ion battery pack manufacturing and electrical insulation applications. Manufactured from high-quality cellulose fiber, it offers excellent dielectric properties, mechanical strength, and long-term reliability. In addition, the insulation paper features a single-sided adhesive backing that allows quick and secure installation on battery cells, terminals, and electrical components. As a result, it simplifies battery pack assembly and improves production efficiency. Because of its excellent heat resistance and electrical insulation characteristics, the paper helps prevent short circuits and protects battery cells from mechanical damage. Furthermore, the material provides good oil resistance and moisture absorption properties, making it suitable for demanding industrial environments. The flexible design allows easy cutting and shaping for custom battery pack configurations. Moreover, it is commonly used in lithium-ion battery manufacturing, electric vehicles, power tools, and industrial insulation applications. This insulation paper is widely used in battery packs, cell insulation, gasket manufacturing, automotive applications, and electrical equipment assembly. 🔹 Key Features Single-side adhesive insulation paper Excellent dielectric properties High mechanical strength Good heat resistance Oil-resistant material Moisture absorption capability Flexible and easy to cut Suitable for lithium battery packs Reliable electrical insulation Durable and long-lasting performance 🔹 Technical Specifications Product Type: Barley Insulation Paper Roll Material: Pure Cellulose Fiber Adhesive Type: Single Side Adhesive Color: Green Width: 65mm Length: 1 Meter Thickness: Less than 0.5mm Electrical Property: High Dielectric Strength Mechanical Strength: High Flexibility: Excellent Packaging Type: Roll 🔹 Applications This insulation paper is suitable for: Lithium-ion battery packs 18650 battery pack assembly Battery terminal insulation Cell paper machines Electric vehicle battery packs Power tool battery packs Automotive gasket applications Electrical insulation projects Industrial equipment insulation 🔹 Package Includes 1 × Single Side Adhesive Barley Insulation Paper Roll 65mm × 1 Meter
TDT LiFePO4 LFP 4S 12.8V 25A Battery Management System
[Lithium Battery Protection Board] The TDT 4S 12.8V 25A LiFePO4 Battery Management System (BMS) is designed to protect and manage 4-cell LiFePO4 battery packs. It continuously monitors each cell’s voltage and current to ensure safe and stable operation. In addition, the BMS includes a balancing function, which helps maintain equal voltage across all cells. As a result, the battery pack delivers better performance and longer life. Moreover, the module provides multiple protection features, including overcharge, over-discharge, overcurrent, and short-circuit protection. Therefore, it prevents damage to the battery and improves reliability. Because of its compact design and efficient performance, this BMS is ideal for solar systems, backup power solutions, electric vehicles, and DIY battery packs. 🔹 Key Features Supports 4S LiFePO4 (LFP) battery packs Nominal voltage 12.8V 25A continuous discharge current Built-in cell balancing High reliability and stable operation Compact and easy to install Suitable for various battery applications 🔹 Protection Functions Overcharge protection Over-discharge protection Overcurrent protection Short-circuit protection Temperature protection (if supported) 🔹 Technical Specifications Parameter Specification Brand TDT Battery Type LiFePO4 (LFP) Battery Configuration 4S Nominal Voltage 12.8V Max Continuous Current 25A Balance Function Yes Application Lithium battery protection 🔹 Applications Solar battery systems DIY LiFePO4 battery packs Backup power systems Electric scooters and bikes Energy storage systems (ESS) 🔹 Package Includes 1 × TDT 4S 12.8V 25A LiFePO4 BMS Board
704060 3.7V 2000mAh LiPo Battery | Rechargeable Lithium Polymer Battery with BMS
[LiPo Cell] The 704060 3.7V 2000mAh Lithium Polymer Battery is a compact, high-capacity rechargeable LiPo battery designed for portable electronic devices. With a nominal voltage of 3.7V and a capacity of 2000mAh, it provides reliable and long-lasting power for small electronics and DIY projects. This battery includes a built-in protection circuit (PCM) that helps prevent overcharging, over-discharging, and short circuits, ensuring safer operation and longer battery life. Its slim pouch design makes it ideal for space-constrained applications such as Bluetooth speakers, GPS trackers, mini cameras, and wearable devices. 🔹 Key Features High capacity 2000mAh LiPo battery Nominal voltage 3.7V Built-in PCM protection circuit Lightweight and compact pouch design Stable discharge performance Long service life Suitable for portable electronic devices 🔹 Technical Specifications Parameter Specification Model 704060 Battery Type Lithium Polymer (LiPo) Nominal Voltage 3.7V Fully Charged Voltage 4.2V Capacity 2000mAh Dimensions 60 × 40 × 7 mm Length 60 mm Width 40 mm Thickness 7 mm Protection Built-in PCM protection board Rechargeable Yes 🔹 Applications Bluetooth speakers MP3 / MP4 players Mini cameras GPS trackers Vehicle data recorders IoT devices Portable electronics DIY electronics projects 🔹 Package Includes 1 × 704060 3.7V 2000mAh Lithium Polymer Rechargeable Battery ⚠ Battery color and label may vary depending on batch. ⚠ Safety Instructions Do not short circuit the battery terminals. Do not charge above 4.2V. Do not discharge below 3.0V. Use a LiPo compatible charger. Do not puncture, crush, or expose battery to fire. Do not charge unattended. Store in a cool and dry place.
Nickel Strip 0.12mm × 5mm 1P Plane Coated Nickel Welding Strip for 18650 Lithium Battery Pack – 1 Meter
[Nickel Strip] The Nickel Strip 0.12mm × 5mm 1P Plane Coated Nickel Welding Strip is specially designed for assembling and repairing 18650 lithium battery packs and other rechargeable battery modules. Made from nickel-coated steel, this strip provides a strong mechanical bond, good electrical conductivity, and excellent weldability. Its flat 1P plane design ensures stable current flow and reliable cell connections. The nickel coating protects against rust and corrosion, making it suitable for long-term use in power banks, e-bike battery packs, solar storage systems, UPS batteries, and DIY lithium battery projects. Supplied in a convenient 1 meter length, this strip is easy to cut, bend, and shape according to your battery pack layout. 🔹 Key Features Made from nickel-coated steel for strength and durability Size: 0.12mm thickness × 5mm width Flat 1P plane strip design Good electrical conductivity and strong weld joints Excellent for spot welding lithium battery cells Corrosion-resistant nickel coating Easy to cut, bend, and form Suitable for 18650, 21700, 26650 lithium cells 🔹 Technical Specifications Material: Nickel-coated steel (Coated Nickel) Thickness: 0.12 mm Width: 5 mm Type: 1P Plane Flat Strip Length: 1 Meter Color: Silver Application: Spot welding for lithium battery packs Compatible Cells: 18650, 21700, 26650 and similar cylindrical cells Conductivity: Good Corrosion Resistance: High (nickel-coated surface) 🔹 Applications 18650 lithium battery pack assembly Power bank manufacturing and repair E-bike and electric vehicle battery packs Solar battery storage systems UPS and inverter battery packs DIY lithium battery projects Battery repair and maintenance 🔹 Package Contents 1 × Coated Nickel Welding Strip (0.12mm × 5mm, Length: 1 Meter)
Nickel Strip 0.12mm × 4mm 1P Plane Coated Nickel Welding Strip for 18650 Lithium Battery Pack – 1 Meter
[Nickel Strip] The Nickel Strip 0.12mm × 4mm 1P Plane Coated Nickel Welding Strip is specially designed for assembling and repairing 18650 lithium battery packs and other rechargeable battery modules. Made from nickel-coated steel, this strip provides a strong mechanical bond, good electrical conductivity, and excellent weldability. Its flat 1P plane design ensures stable current flow and reliable cell connections. The nickel coating protects against rust and corrosion, making it suitable for long-term use in power banks, e-bike battery packs, solar storage systems, UPS batteries, and DIY lithium battery projects. Supplied in a convenient 1 meter length, this strip is easy to cut, bend, and shape according to your battery pack layout. 🔹 Key Features Made from nickel-coated steel for strength and durability Size: 0.12mm thickness × 4mm width Flat 1P plane strip design Good electrical conductivity and strong weld joints Excellent for spot welding lithium battery cells Corrosion-resistant nickel coating Easy to cut, bend, and form Suitable for 18650, 21700, 26650 lithium cells 🔹 Technical Specifications Material: Nickel-coated steel (Coated Nickel) Thickness: 0.12 mm Width: 4 mm Type: 1P Plane Flat Strip Length: 1 Meter Color: Silver Application: Spot welding for lithium battery packs Compatible Cells: 18650, 21700, 26650 and similar cylindrical cells Conductivity: Good Corrosion Resistance: High (nickel-coated surface) 🔹 Applications 18650 lithium battery pack assembly Power bank manufacturing and repair E-bike and electric vehicle battery packs Solar battery storage systems UPS and inverter battery packs DIY lithium battery projects Battery repair and maintenance 🔹 Package Contents 1 × Coated Nickel Welding Strip (0.12mm × 4mm, Length: 1 Meter)
Nickel Strip 0.15mm × 6mm 1P Pure Nickel Welding Strip for 18650 Lithium Battery Pack – 1 Meter
[Nickel Strip] The Nickel Strip 0.15mm × 6mm 1P Pure Nickel Welding Strip is specially manufactured for building and repairing 18650 lithium battery packs and other rechargeable battery assemblies. Made from high-purity nickel, this strip offers low electrical resistance, excellent conductivity, and strong spot-welding performance. Its flat 1P plane design ensures uniform current flow and reliable connections between battery cells. The strip is corrosion-resistant and durable, making it ideal for long-term use in power banks, e-bike battery packs, solar storage systems, UPS batteries, and DIY lithium battery projects. Supplied in a convenient 1 meter length, this strip is easy to cut and shape according to your battery pack design. 🔹 Key Features Made from pure nickel (not nickel-plated steel) Size: 0.15mm thickness × 6mm width Flat 1P plane strip for uniform current flow Excellent conductivity with low internal resistance Strong and reliable for spot welding Corrosion-resistant and long-lasting Easy to cut, bend, and shape Perfect for 18650, 21700, 26650 lithium battery packs 🔹 Technical Specifications Material: Pure Nickel Thickness: 0.15 mm Width: 6 mm Type: 1P Plane Flat Strip Length: 1 Meter Color: Silver Application: Spot welding for lithium battery packs Compatible Cells: 18650, 21700, 26650 and similar cylindrical cells Resistance: Very low (high conductivity) Corrosion Resistance: Excellent 🔹 Applications 18650 lithium battery pack assembly Power bank manufacturing and repair E-bike and electric vehicle battery packs Solar battery storage systems UPS and inverter battery packs DIY lithium battery projects Battery repair and maintenance 🔹 Package Contents 1 × Pure Nickel Welding Strip (0.15mm × 6mm, Length: 1 Meter)
Out of stockHigh Quality Ultra Flexible 8 AWG Silicone Wire 1m (Red) + 1m (Black)
[Silicon Wire] Upgrade your high-power electronics projects with this High Quality Ultra Flexible 8 AWG Silicone Wire Set, including 1 meter Red + 1 meter Black. Made from premium tinned copper and heat-resistant silicone insulation, this wire offers exceptional flexibility, durability, and conductivity—perfect for high-current applications. The soft silicone jacket allows easy routing even in tight spaces, while providing superior heat resistance up to 200°C, making it ideal for RC vehicles, drones, robotics, lithium battery packs, inverters, chargers, ESCs, solar systems, and other high-load circuits. Whether you're building custom battery packs or upgrading your power wiring, this 8 AWG silicone wire provides low resistance, high amp handling, and long-lasting performance. Please find out our more cable and wires. Click here Note : 1 Qty = 1 Meter. Cable length will be continuous as per your ordered Qty. ⭐ Key Features Ultra Flexible 8 AWG Wire – Easy to bend and route in tight spaces Premium Silicone Insulation – Heat resistant, durable, oil-resistant and flame-retardant High Strand Count Tinned Copper – Superior conductivity & corrosion resistance High Current Handling – Suitable for heavy-load applications Includes: 1m Red + 1m Black silicone wire Low Resistance – Ensures efficient power transfer Perfect for RC, drones, battery packs, inverters, and ESC wiring 🔧 Typical Specifications Wire Gauge: 8 AWG Length: 1m Red + 1m Black Material: High-strand tinned copper Insulation: Soft silicone rubber Temperature Rating: Up to 200°C Voltage Rating: 600V (typical) Flexibility: Ultra soft, high bend endurance Package Includes : 1 x High Quality 8 AWG Silicone Wire 1m (Red) 1 x High Quality 8 AWG Silicone Wire 1m (Black)
4S 5A Active Balancer Equalizer Board for LiFePO4/Li-ion
[Lithium Battery Protection Board] 4S 5A Active Balancer Equalizer Board for LiFePO4/Li-ion Software active equalization specification Number of battery pack strings – 4S Balance current ≤5A Balance mode – Active equilibrium working temperature -20°C~60°C The 4S5A Active Balancer (NEEY) is a battery management solution designed for 4 series lithium-based battery packs. It supports 5A of current per cell for active balancing, which ensures that all cells in the battery pack remain at a balanced voltage level. Active balancing redistributes energy from cells with higher voltage to those with lower voltage, optimizing the overall performance and efficiency of the battery. This helps prevent individual cells from becoming overcharged or discharged excessively, extending the lifespan and enhancing the safety of the battery pack. The NEEY model delivers reliable performance in energy storage systems, electric vehicles, and other high-demand lithium battery applications. Applicable battery type : NCM/LFP Teemary Lithium/Lithium Iron Single voltage working range: NCM/LFP version 3.0V-4.2V Balance method : Detect the nearby voltage difference is greater than 0.1V totrigger the start of balanced the adjacent battery voltage difference is less than 003V to stop working Balance current: 0.2V Adjacent voltage difference 0.1V, Balance current: 054-0.74, Adjacent voltage difference 0.2V. Balanced current: 2A LED indicator : 1. When the equalization light is on the equalization work is turned on, 2. The equalization light goes out the equalization circuit sleeps Operating Temperature Range: -20° to 60° The smaller the differential voltage, the smaller the balance current. Package Include: 1x 4S 5A Active Balancer Equalizer Board for LiFePO4/Li-ion 1x Cable
A Grade 3.2V 15Ah 3C 48Wh 3000 Cycles Prismatic Lithium Ion Lipo4 33140 Battery
[LiFePO4 Battery Cell] 32140 15Ah Battery Specification Overview The 15Ah 32140 is a lithium iron phosphate (LiFePO4/LFP) battery in the 32140 cylindrical format (32mm diameter x 140mm height). It's designed for high-capacity, high-cycle-life applications, particularly in energy storage and electric vehicles. Here's a detailed breakdown: Key Specifications • Model: JSK-32140 (or similar variant) • Chemistry: LiFePO4 (LFP) • Nominal Capacity: 15Ah (15000mAh) • Nominal Voltage: 3.2V • Charge Voltage: 3.65V (max) • Discharge Cut-off: 2.5V • Max Continuous Discharge: 30A (2C) • Peak Discharge (pulse): 60A (4C, ≤3 sec) • Standard Charge Current: 7.5A (0.5C) • Fast Charge Possible: Up to 15A (1C) • Cycle Life: 2000+ cycles (to 80% capacity) • Dimensions: 32mm × 140mm • Weight: ~450g (varies by manufacturer) • Operating Temp: ◦ Charge: 0°C to 45°C ◦ Discharge: -20°C to 60°C Key Features ✅ High Capacity – 15Ah is substantial for a single cell, ideal for energy storage. ✅ Long Cycle Life – 2000+ cycles (far exceeding standard Li-ion/NMC batteries). ✅ Safety – LiFePO4 chemistry is non-flammable and stable under abuse. ✅ High Discharge Capability – 30A continuous (suitable for power tools, small EVs). Common Applications • Solar energy storage systems (home/grid storage) • Electric bikes/scooters (as part of a battery pack) • Power tools (replacing lead-acid or NMC packs) • Marine/RV power systems • Backup power stations Safety & Handling No protection circuit needed (LiFePO4 is inherently safer than NMC/Li-ion). Use a LiFePO4-compatible charger (3.65V max, not 4.2V Li-ion chargers). Avoid short-circuiting – Can still deliver dangerous current. Storage: Store at ~50% charge in a cool, dry place. WARNING: Do NOT expose the battery to water Do NOT expose the battery to fire & high temperature Do NOT short circuit, crush or disassemble Only use LiFePO4 charger Storage at 50% capacity, recharge every 3 months. The storage area should be clean, cool, dry and ventilated. Grade A 100% brand new
TPA3116D2 XH-M543 120W Dual Channel High Power Original Digital Power Amplifier Board
[Amplifier Board] Build your own music system with 120 watts of stereo output. TPA3116D2 XH-M548 Dual Channel 120W Digital Power Amplifier Board is newly designed digital audio amplifier board with fine quality is practical to install and use also has good performance. It features high-efficiency class D audio power amplifier with the latest and original TPA3116D2 core technology the BTL bridge circuit is more efficient than before. This product uses the double power supply transformer with a dynamic power supply range from 12V to 24V with high efficiency small quiescent current. Additionally, it is equipped with Perfect protection functions like overvoltage protection and output current limit. Features: A strong TPA3116D2 chip is a digital power amplifier chip, with low idle loss characteristics, makes it work well and quickly. Onboard, front-facing IC to improve the input sensitivity, high-definition sound quality. It can be used for car vehicle computer speaker, family audio and video, and empty square. This product has the characteristics of loud sound, the capacitance is large, excellent sound quality. There is no solder joint on the back of the circuit board, the chip capacitors, and the solder board together, so there is no possibility of short circuit. Package Includes: 1 x TPA3116D2 XH-M543 120W Dual Channel High Power Digital Power Amplifier Board
IMP 29V 5A Electric Vehicle Battery Charger for 24V Battery Li-ion
IMP 29V 5A Electric Vehicle Battery Charger for 24V Battery Li-ion The IMP 29V 5A Electric Vehicle Battery Charger is a premium-quality charging solution specially designed for 24V lithium-ion battery systems used in electric vehicles, e-bikes, scooters, and battery-powered equipment. Delivering a stable regulated output of 29V with 5A charging current, this charger ensures fast, efficient, and safe charging while protecting your valuable battery pack. Built with advanced SMPS technology, this charger offers excellent energy efficiency, low heat generation, and reliable long-term performance. It is equipped with comprehensive protection features including over-voltage, over-current, short-circuit, and overheating protection, ensuring maximum safety for both the charger and the battery. The charger’s compact, lightweight, and portable design makes it ideal for home charging, workshop use, and on-the-go charging needs. Designed for durability and performance, the IMP charger helps extend battery life and maintain stable charging cycles. Perfect for use in electric bicycles, electric scooters, mobility vehicles, backup battery systems, and other 24V lithium battery applications. ⭐ KEY FEATURES ✔ Designed for 24V Lithium-Ion Battery Systems✔ Output Voltage: 29V DC – stable regulated charging✔ Charging Current: 5A for fast & efficient charging✔ Built-in Over-Voltage, Over-Current, Short-Circuit & Over-Temperature Protection✔ High-Efficiency SMPS Technology✔ Compact, lightweight & portable design✔ Extends battery life and charging safety✔ Ideal for EVs, e-bikes, scooters & 24V battery packs 🔧 TECHNICAL SPECIFICATIONS Input Voltage: AC 100–240V, 50/60Hz Output Voltage: DC 29V Charging Current: 5A Battery Type: Lithium-Ion (24V systems) Protection Features: Over-voltage, over-current, short-circuit, overheating Design: Compact, lightweight, portable Application: Electric vehicles, e-bikes, 24V lithium battery systems 🎯 APPLICATIONS Electric bicycles (E-Bikes) Electric scooters & EVs 24V lithium battery packs Mobility vehicles Backup battery charging systems DIY & professional battery charging setups 📦 PACKAGE INCLUDES 1 × IMP 29V 5A Electric Vehicle Battery Charger (for 24V Li-ion Battery)
Out of stockTDT 10S 20A NMC Battery Protection and Charger BMS with Balance Hardware
TDT BMS NMC 10S 20A WITH BALANCE Hardware Product Data Sheet The BMS NMC 10S 20A WITH BALANCE (TDT) is a robust and efficient Battery Management System designed for 10-series (10S) lithium-ion NMC battery packs. With a nominal system voltage of 37V and a continuous current capacity of 20A, this module ensures safe and stable operation of high-performance battery packs used in e-mobility, energy storage, and industrial tools. Technical Specifications Battery Chemistry: Lithium-ion (NMC) Configuration: 10S (10 cells in series) input Voltage B+ to B-: -0.3~+20V Overcharge Detection voltage/1CELL: 4.28±0.05V Over discharge Detection voltage/1CELL: 2.8±0.1V Over current: 4-6A Suggest working temperature: -20°C~+60°C Key Features 20A High Current Support Perfect for mid-to-high power battery packs used in electric bikes, scooters, power tools, and solar inverters. Built-in Balancing Function Automatically maintains uniform voltage across all cells to extend overall battery life. Comprehensive Protections Protects against overcharge, over-discharge, overcurrent, short circuit, and thermal runaway. Durable Aluminum Heat Sink Casing Helps dissipate heat effectively for stable thermal performance. Applications Electric Bicycles & Scooters (E-Bikes) Solar Battery Packs & Inverters DIY 10S Battery Pack Projects Cordless Industrial Tools Electric Wheelchairs & Mobility Carts The PCM NMC 10S 20A WITH BALANCE (TDT) is a Battery Protection Circuit Module (PCM) designed for 10 series Nickel Manganese Cobalt (NMC) battery packs, supporting a 20A continuous discharge current. This module is ideal for high-power applications such as energy storage systems, backup power solutions, and electric vehicles. It offers essential protection features, including overcharge, over-discharge, overcurrent, short circuit, and temperature protection, ensuring the safe operation of the battery. The WITH BALANCE feature ensures proper voltage balancing across the cells, optimizing performance and extending the battery’s lifespan. The TDT designation indicates a specific manufacturer or design for reliable battery management.
Out of stockXT60 Female Plug Battery Connector Panel Mount Type
[Power Connector] The XT60E-F Female Plug Battery Connector is a reliable and high-performance panel mount power connector designed for high current applications up to 30A. Manufactured using high-temperature resistant nylon housing and gold-plated brass contacts, this connector ensures excellent electrical conductivity and durability even under demanding conditions. The XT60E-F panel mount design allows easy installation on battery enclosures, power distribution panels, and charging stations. Its mechanical mounting holes provide secure installation while the solder terminals allow convenient wiring with thick gauge cables up to 12 AWG. This connector is widely used in LiPo battery packs, RC models, drones, robotics, electric vehicles, power supplies, and DIY battery systems. The gold-plated contacts reduce resistance and improve current flow, ensuring stable and efficient power transfer. The XT60E-F connector is fully compatible with standard XT60 male connectors, making it a reliable solution for high-current power connections in professional and hobby electronics projects. ⭐ Key Features XT60E-F female panel mount connector High current capacity up to 30A Gold-plated brass contacts High temperature resistant nylon housing Secure panel mounting design Compatible with XT60 male connectors Supports wire sizes up to 12 AWG Ideal for LiPo batteries, RC models, drones and robotics 🔧 Technical Specifications Model: XT60E-F Connector Type: XT60 Female Panel Mount Rated Current: 30A Contact Material: Brass Contact Plating: Gold Plated Housing Material: High-Temperature Nylon Mounting Type: Panel Mount Orientation: Straight Compatible Wire Size: Up to 12 AWG 🎯 Applications LiPo battery packs RC cars and drones Electric vehicles and robotics Power distribution systems Battery chargers and adapters DIY battery projects 📦 Package Includes 1 × XT60E-F Female Plug Battery Connector (Panel Mount Type)
JBD 3-4S/100A Smart BMS For LiFePO4 (LFP) batteries
[Lithium Battery Protection Board] JBD Smart BMS 3-4S 100A (DP04S014) Charge and discharge are both at the same port Product Data Sheet Cell specifications: 3~4 strings of LiFePO4 battery Continuous current: 100A Balance detect Voltage 3.8 Interface type: Charge and discharge are both at the same port Charging voltage: 3.6V*Number of strings Cell voltage range: 2.30~3.75V Continuous charging current: 100A Continuous discharging current: 100A The JBD SMART BMS 100A DP04S014 (3-4S) is a compact and powerful Battery Management System designed for lithium-ion and LiFePO4 battery packs with 3 to 4 series cells. It supports a continuous discharge current of 100A, making it suitable for high-power applications such as electric vehicles, portable power systems, and energy storage solutions. This BMS provides essential protection features including overcharge, over-discharge, overcurrent, short circuit, and temperature management to ensure safe and reliable battery operation. With active cell balancing, it maintains voltage consistency across cells. It also supports UART, RS485, and CANBUS communication, along with Bluetooth for real-time monitoring and diagnostics, offering flexibility and control over battery performance. Package Includes: 1 x JBD 3-4S/100A Smart BMS For LiFePO4 (LFP) batteries 1 x 5 Pin Connector
Out of stockSingle Pole 75A Power Connector Red and Black
[Power Connector] Description Current Rating: 75 amps Voltage Rating: Up to 600V (depending on application) Connector Type: Single pole, quick-disconnect Material: High-impact plastic housing, copper contacts Color: Typically color-coded for polarity (e.g., red for positive, black for negative) Applications: Electric vehicles, solar power systems, battery banks, industrial equipment, power distribution Temperature Range: Typically -40°C to 105°C Locking Mechanism: Secure latch or snap-in design to prevent accidental disconnection Contact Resistance: Low resistance for minimal voltage drop and efficient power transmission Features: Polarized for correct connection, durable and reliable performance in high-current systems The Single Pole 75A Connector is a high-current electrical connector designed for applications requiring secure and reliable connections. Rated for 75 amps, this connector is ideal for use in high-power systems such as electric vehicles (EVs), solar energy setups, battery banks, and industrial machinery. It features a quick-disconnect design, allowing for easy and safe connection and disconnection. The connector typically has a polarized design to ensure correct connections and prevent mistakes. With a durable, high-impact plastic housing and copper contacts, it ensures low contact resistance, minimal voltage drop, and long-lasting performance in demanding environments. Power Pole Connector PA75 Power plug Red & Black QS connector Features: QS connector ensures secure and efficient fit. Low resistance for stable power transfer. Versatile for RC, energy storage, and other applications. Package Includes: 1 x Single Pole 75A Power Connector Red and Black
Copper Bus Bar For HIGHSTAR 100AH Prismatic Cell -2MM
[Nickel Strip] COPPER BUS BAR for HighStart 100Ah Cell Material: High-quality copper for excellent conductivity Application: Designed for HighStart 100Ah battery cells Function: Efficient electrical power transfer between cells Durability: Corrosion-resistant and long-lasting Current Capacity: Suitable for high-current applications Use: Ideal for electric vehicles, energy storage, and high-capacity battery systems The Copper Bus Bar for HighStart 100Ah Cell is an essential component designed for connecting and conducting electricity between cells in battery packs, particularly for the HighStart 100Ah model. Made from high-quality copper, known for its excellent electrical conductivity, this bus bar ensures efficient power transfer and minimizes energy loss. The copper material also provides superior durability and resistance to corrosion, ensuring long-lasting performance in various environments. It is specifically engineered to handle high currents, making it ideal for use in high-capacity battery systems, such as those used in electric vehicles, renewable energy storage, and other demanding applications. This copper busbar is designed for reliable interconnection of lithium cells, particularly compatible with Ganfeng 86Ah and 100Ah cells, as well as Highstar 100Ah in parallel configurations. In electrical power distribution, a bus bar is a strip of copper or aluminum that conducts electricity within a switchboard, distribution board, substation or other electrical apparatus The size of the bus bar determines the maximum amount of current that can be safely carried. For rigid electrical connections, Tinned coated Copper Bus Bars offer a very efficient solution. Resistivity in copper bars is very low, 25 in^2 bar 1 foot long is only 0.0000329 Ohms – roughly 8 Watts lost at 500 Amps. Size : 70 x 20 x 2mm Package Includes : 1 x Copper Bus Bar For HIGHSTAR 100AH Prismatic Cell -2MM
Out of stock6S 18650 Li-Po Lithium Battery Capacity Indicator Module
[Li-Ion Capacity Indicator] This battery type capacity indicator module display shows the display is more intuitive and more beautiful. A wider range of applications, nickel-metal hydride batteries, 18650 and polymer lithium battery packs, lead-acid storage, electric vehicle batteries, electric equipment can be used. This display has a reverse connection function, even if the positive and negative connection will not burn. To use the display just connect the positive and negative terminals of the display board to the positive and negative terminals of the battery under test. The digital tube will display the real-time battery power. Features :- Battery type of electricity quantity display. Wide application fields: lithium battery. Using Method: connect display board positive and negative port with tested battery positive. and negative port, the digital tube will display real-time battery electricity quantity. Digital Color: outline red, display block blue (when the battery electricity quantity is full, it will be all on). Specs: Input Supply Voltage: 19.8 ~ 25.2VDC Colour Display Reverse Connection Protection Wide Variety of applications Length: 41 mm Width: 20 mm Approx Weight: 5 gm Application: Battery pack Consumer electronics product 22.2V voltage rating Power supply Power bank and charger Package Includes :- 1 X 6S 18650 Li-Po Lithium Battery Capacity Indicator Module * Product Images are shown for illustrative purposes only and may differ from actual product.
Out of stock7S 18650 Li-Po Lithium Battery Capacity Indicator Module
[Li-Ion Capacity Indicator] This battery type capacity indicator module display shows the display is more intuitive and more beautiful. A wider range of applications, nickel-metal hydride batteries, 18650 and polymer lithium battery packs, lead-acid storage, electric vehicle batteries, electric equipment can be used. This display has a reverse connection function, even if the positive and negative connection will not burn. To use the display just connect the positive and negative terminals of the display board to the positive and negative terminals of the battery under test. The digital tube will display the real-time battery power. Features :- Battery type of electricity quantity display. Wide application fields: lithium battery. Using Method: connect display board positive and negative port with tested battery positive. and negative port, the digital tube will display real-time battery electricity quantity. Digital Color: outline red, display block blue (when the battery electricity quantity is full, it will be all on). Specs: Input Supply Voltage: 23.1 ~ 29.4VDC Colour Display Reverse Connection Protection Wide Variety of applications Length: 41 mm Width: 20 mm Approx Weight: 5 gm Application: Battery pack Consumer electronics product 25.9V voltage rating Power supply Power bank and charger Package Includes :- 1 X 7S 18650 Li-Po Lithium Battery Capacity Indicator Module * Product Images are shown for illustrative purposes only and may differ from actual product.
Out of stock2S 18650 Li-Po Lithium Battery Capacity Indicator Module
[Li-Ion Capacity Indicator] This battery type capacity indicator module display shows the display is more intuitive and more beautiful. A wider range of applications, nickel-metal hydride batteries, 18650 and polymer lithium battery packs, lead-acid storage, electric vehicle batteries, electric equipment can be used. This display has a reverse connection function, even if the positive and negative connection will not burn. To use the display just connect the positive and negative terminals of the display board to the positive and negative terminals of the battery under test. The digital tube will display the real-time battery power. Features :- Battery type of electricity quantity display. Wide application fields: lithium battery. Using Method: connect display board positive and negative port with tested battery positive. and negative port, the digital tube will display real-time battery electricity quantity. Digital Color: outline red, display block blue (when the battery electricity quantity is full, it will be all on). Specs: Input Supply Voltage: 6.6 ~ 8.4VDC Colour Display Reverse Connection Protection Wide Variety of applications Length: 41 mm Width: 20 mm Approx Weight: 5 gm Application: Battery pack Consumer electronics product 7.4V voltage rating Power supply Power bank and charger Package Includes :- 1 X 2S 18650 Li-Po Lithium Battery Capacity Indicator Module * Product Images are shown for illustrative purposes only and may differ from actual product.
Out of stock1S 18650 Li-Po Lithium Battery Capacity Indicator Module
[Li-Ion Capacity Indicator] This battery type capacity indicator module display shows the display is more intuitive and more beautiful. A wider range of applications, nickel-metal hydride batteries, 18650 and polymer lithium battery packs, lead-acid storage, electric vehicle batteries, electric equipment can be used. This display has a reverse connection function, even if the positive and negative connection will not burn. To use the display just connect the positive and negative terminals of the display board to the positive and negative terminals of the battery under test. The digital tube will display the real-time battery power. Features :- Battery type of electricity quantity display. Wide application fields: lithium battery. Using Method: connect display board positive and negative port with tested battery positive. and negative port, the digital tube will display real-time battery electricity quantity. Digital Color: outline red, display block blue (when the battery electricity quantity is full, it will be all on). Specs: Input Supply Voltage: 3.3 ~ 4.2VDC Colour Display Reverse Connection Protection Wide Variety of applications Length: 41 mm Width: 20 mm Approx Weight: 5 gm Application: Battery pack Consumer electronics product 3.7V voltage rating Power supply Power bank and charger Package Includes :- 1 X 1S 18650 Li-Po Lithium Battery Capacity Indicator Module * Product Images are shown for illustrative purposes only and may differ from actual product.
TDT LiFePO4 LFP 4S 12.8V 10A Battery Management System
[Lithium Battery Protection Board] The TDT LiFePO4 LFP 4S 12.8V 10A Battery Management System (BMS) is designed to protect and manage 4-cell LiFePO4 battery packs (12.8V nominal). It ensures safe charging and discharging by providing multiple protection functions, improving battery life and safety. This BMS board is ideal for solar energy storage, backup power systems, DIY battery packs, electric vehicles, power banks, and inverter systems using LiFePO4 cells. The board continuously monitors each cell voltage and controls charge/discharge current to prevent damage caused by overcharging, deep discharge, overcurrent, or short circuits. 🔹 Key Features Designed for 4S LiFePO4 (12.8V nominal) battery packs Continuous discharge current: 10A Overcharge protection Over-discharge protection Overcurrent protection Short-circuit protection Cell balancing function Compact and lightweight design Improves battery safety and lifespan 🔹 Technical Specifications Brand: TDT Battery Type: LiFePO4 (LFP) Series Configuration: 4S Nominal Voltage: 12.8V Maximum Charging Voltage: 14.6V Continuous Discharge Current: 10A Overcharge Protection Voltage: ~3.65V ± 0.05V per cell Over-discharge Protection Voltage: ~2.5V ± 0.1V per cell Balancing Function: Yes Short Circuit Protection: Yes Operating Temperature: -20°C to +60°C 🔹 Applications 12.8V LiFePO4 battery packs Solar storage systems UPS systems Inverter battery packs Electric scooters / small EVs DIY power backup systems Portable power stations 🔹 Wiring Instructions (Basic) B- → Battery Pack Negative B1 → Cell 1 Positive B2 → Cell 2 Positive B3 → Cell 3 Positive B4 → Cell 4 Positive P- → Output Negative P+ → Output Positive (Battery Positive) ⚠ Always connect balance wires in correct sequence to avoid damage. 🔹 Package Includes 1 × TDT 4S 12.8V 10A LiFePO4 BMS Board
TDT LiFePO4 LFP 4S 12.8V 20A Battery Management System
[Lithium Battery Protection Board] The TDT 4S 12.8V 20A LiFePO4 Battery Management System (BMS) is designed to protect and manage 4-cell LiFePO4 battery packs. It continuously monitors each cell’s voltage and current to ensure safe and stable operation. In addition, the BMS includes a balancing function, which helps maintain equal voltage across all cells. As a result, the battery pack delivers better performance and longer life. Moreover, the module provides multiple protection features, including overcharge, over-discharge, overcurrent, and short-circuit protection. Therefore, it prevents damage to the battery and improves reliability. Because of its compact design and efficient performance, this BMS is ideal for solar systems, backup power solutions, electric vehicles, and DIY battery packs. 🔹 Key Features Supports 4S LiFePO4 (LFP) battery packs Nominal voltage 12.8V 20A continuous discharge current Built-in cell balancing High reliability and stable operation Compact and easy to install Suitable for various battery applications 🔹 Protection Functions Overcharge protection Over-discharge protection Overcurrent protection Short-circuit protection Temperature protection (if supported) 🔹 Technical Specifications Parameter Specification Brand TDT Battery Type LiFePO4 (LFP) Battery Configuration 4S Nominal Voltage 12.8V Max Continuous Current 20A Balance Function Yes Application Lithium battery protection 🔹 Applications Solar battery systems DIY LiFePO4 battery packs Backup power systems Electric scooters and bikes Energy storage systems (ESS) 🔹 Package Includes 1 × TDT 4S 12.8V 20A LiFePO4 BMS Board