All products · 12 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Out of stockRJ45 / RJ11 Cable Tester
Network cable continuity tester, LED per wire, remote terminator.
Digital USB Mobile Power Charging Current Voltage Tester Meter
[Ammeter and Voltmeter] Digital USB Mobile Power Charging Current Voltage Tester Meter The Digital USB Mobile Power Charging Current Voltage Tester Meter is a compact USB testing device designed to measure and display charging voltage and current in real time. It is useful for checking the power output of USB chargers, power banks and other USB-powered devices. ⭐ Key Features Precise current and voltage measurement Simultaneous voltage and current display Bright digital LCD display Straight USB connector design USB Type-A Male input and USB Type-A Female output Compact and lightweight Easy to connect and use Suitable for USB chargers and power banks Compatible with USB-powered devices 📋 Technical Specifications Product Name: Digital USB Mobile Power Charging Current Voltage Tester Meter Color: As per available stock Input Voltage: 3.5V–7.0V Output Voltage: 3.5V–7.0V Current Measurement Range: 0A–3A Voltage Accuracy: ±1% Current Accuracy: ±1% Display Type: Digital LCD Display Screen Size: 0.91 inch Data Display: Voltage and Current simultaneously Power Consumption: ≤0.1W Interface: USB Type-A Male (Input) / USB Type-A Female (Output) Measurement Frequency: 2 times per second Operating Temperature: 0°C–45°C Material: ABS Plastic Dimensions: 64 × 23 × 15mm Weight: 15g Compatibility: USB-powered devices 🔧 Applications Mobile charger testing USB charger testing Power bank testing USB power supply testing Mobile phone charging analysis USB device testing Electronics troubleshooting DIY electronics projects Checking charging voltage and current 🛠️ How to Use Insert the USB Type-A Male connector into the USB charger, power bank or USB power source. Connect the USB-powered device to the USB Type-A Female output. The digital display will show the voltage and charging current. Monitor the readings during charging or testing. 📦 Package Includes 1 × Digital USB Mobile Power Charging Current Voltage Tester Meter ⚠️ Important Notes Do not exceed the specified voltage and current measurement ranges. This tester is intended for USB/DC applications. Actual readings may vary depending on the charger, cable and connected device. Use within the specified operating temperature range.
KWS-MX18 10-in-1 USB Tester Digital LCD Voltage, Current & Power Meter
[Ammeter and Voltmeter] KWS-MX18 10-in-1 USB Tester – Digital LCD Voltage, Current & Power Meter The KWS-MX18 10-in-1 USB Tester is a compact multifunction digital testing instrument designed for monitoring and evaluating USB chargers, power banks, USB ports, mobile charging systems, and other DC power sources. It provides real-time measurement of voltage, current, power, capacity, energy, charging time, resistance, and internal temperature on its digital display. The tester supports a DC voltage range of 4–30V and current measurement up to approximately 5.1A, with power measurement up to 150W. It also provides capacity and energy monitoring, making it useful for checking the actual charging performance and capacity of USB power supplies and power banks. ⭐ Key Features 10-in-1 multifunction USB tester Digital LCD display Real-time voltage and current monitoring Measures power consumption Measures accumulated charging capacity Measures energy consumption Charging time measurement Charging resistance measurement Internal temperature measurement Positive and negative voltage measurement Stores measurement data in 9 groups Power-off memory function Compact and lightweight design Suitable for USB charger and power-bank testing Supports QC2.0 / QC3.0 according to available product information 📋 Technical Specifications Product Type: 10-in-1 USB Digital Tester Model: KWS-MX18 Input Voltage Range: DC 4–30V Current Measurement: 0–5.1A Power Measurement: 0–150W Capacity Measurement: 0–999999mAh Energy Measurement: 0–999999mWh Timing Range: 0–99 Hours Charging Resistance: 0–999.9Ω Internal Temperature: 0–80°C Positive Voltage Measurement: 0–10V Negative Voltage Measurement: 0–10V Memory Groups: 1–9 Display: Digital LCD Material: ABS Dimensions: Approximately 56.6 × 24.7 × 11.2mm Weight: Approximately 13.9g Input Connector: USB Output Connector: USB Function Button: Yes 🔍 10 Measurement Functions Voltage: 4–30V DC Current: 0–5.1A Power: 0–150W Capacity: 0–999999mAh Energy: 0–999999mWh Charging Time: 0–99 hours Charging Resistance: 0–999.9Ω Positive Voltage: 0–10V Negative Voltage: 0–10V Internal Temperature: 0–80°C 💾 Memory Function The KWS-MX18 can store charging measurement information in 9 separate memory groups. This allows you to compare charging capacity and energy measurements from different chargers or devices. The stored data can be viewed using the function button, and an individual memory group can be cleared by holding the button for approximately 3 seconds. 🔘 Button Functions Single Press: View stored measurement data from memory groups 1–9. Long Press: Clear the currently selected memory group. Double Press: Change the display page. Calibration: The device supports voltage and current calibration according to the supplied manual. 🔌 Applications USB Charger Testing Mobile Charger Testing Power Bank Testing USB Port Testing Mobile Phone Charging Analysis USB Cable Testing Power Supply Monitoring DC Power Measurement Electronics Troubleshooting DIY Electronics Projects Charger Performance Testing Battery Charging Analysis 🛠️ How to Use Connect the KWS-MX18 in-line between the USB power source and the USB-powered device. Once powered, the LCD displays the measured electrical parameters. You can use the function button to change display pages and access stored measurement data. It is particularly useful for comparing chargers, power banks, cables, and USB ports by monitoring actual voltage, current, power, capacity, and energy delivered. 📦 Package Includes 1 × KWS-MX18 10-in-1 USB Digital Tester ⚠️ Color Note: Color: White / Black Color will be shipped depending on stock availability. Any one color (White or Black) may be shipped based on available stock. Specific color cannot be guaranteed. ⚠️ Precautions Do not exceed the specified 30V DC input voltage. Do not exceed the specified current measurement range. Ensure correct USB connection direction before use. Keep the tester away from water and excessive moisture. Do not use it for measuring mains AC voltage. The device is intended for DC/USB power measurement. Actual measurement accuracy can depend on the connected source, load, cable, and operating conditions.
10-in-1 USB & Type-C Digital Tester – IPS Voltmeter, Ammeter, Impedance & Capacity Meter
[Ammeter and Voltmeter] The 10-in-1 USB & Type-C Digital Power Tester is a multifunction USB measurement instrument developed for engineers, technicians, hobbyists, and electronics enthusiasts. It accurately monitors USB charging performance while providing comprehensive electrical measurements for USB-A and USB Type-C devices. Equipped with a bright IPS true-color LCD display, the tester simultaneously displays ten important charging parameters including Voltage, Current, Power, Capacity (mAh), Energy (mWh), Cable Resistance, Temperature, Charging Time, D+ Voltage, and D− Voltage. The tester features both USB-A and USB Type-C input/output interfaces, allowing compatibility with traditional USB chargers as well as modern USB-C Power Delivery devices. It supports testing of fast chargers, mobile phones, tablets, laptops, power banks, USB cables, and various USB-powered electronics. With support for measurements up to 150W and 5A, this tester is suitable for high-power USB-C PD chargers while consuming less than 20mA of operating current. Built-in control buttons allow users to switch display modes, perform fast-charge diagnostics, and manage measurement functions easily. Its compact design makes it an excellent tool for electronics repair, charger verification, cable testing, battery capacity measurement, laboratory work, and DIY electronics projects. 🔹 Key Features Dual Interface: USB-A & USB Type-C Input/Output Supports USB PD and Fast Charging IPS Full Color LCD Display Measures Voltage, Current and Power Capacity (mAh) & Energy (mWh) Measurement Cable Resistance (Impedance) Measurement Internal Temperature Monitoring USB D+ / D− Voltage Detection Charging Timer Function High Accuracy Measurement Low Self Power Consumption Compact Portable Design Easy Operation with Dedicated Function Buttons 🔹 Technical Specifications Product Type: USB Digital Power Tester Display: IPS True Color LCD Input Interface: USB-A / USB Type-C Output Interface: USB-A / USB Type-C Maximum Power Measurement: 150W Maximum Current: 5A Voltage Measurement: USB Standard & USB-C PD Power Measurement Range: 0–150W Current Measurement: Up to 5A Capacity Measurement: mAh Energy Measurement: mWh Impedance Measurement Range: 1–999.9Ω Temperature Measurement: 0°C to 80°C USB D+ Voltage Range: 0–2.99V USB D− Voltage Range: 0–2.99V Timer Range: 999 Hours 59 Minutes Refresh Rate: Approximately 500ms Self Power Consumption: <20mA Operating Buttons: Mode / Power Dimensions: 76.9 × 38 × 11 mm 🔹 Applications This USB tester is suitable for: USB charger testing USB-C PD charger testing Power bank capacity testing Mobile charger verification Fast charging protocol diagnostics USB cable resistance testing Laptop USB-C charger testing Electronics repair DIY electronics projects Laboratory measurements Battery charging analysis Quality inspection of USB power supplies 🔹 Package Includes 1 × 10-in-1 USB & Type-C Digital Power Tester 🔹 Frequently Asked Questions (FAQ) What does "10-in-1" mean? It measures ten important parameters: Voltage, Current, Power, Capacity, Energy, Impedance, Temperature, Charging Time, D+ Voltage, and D− Voltage. Does it support both USB-A and USB Type-C? Yes. It features both USB-A and USB Type-C input and output interfaces. What is the maximum power it can measure? Up to 150W. What is the maximum current supported? Up to 5A. Can it test USB-C laptop chargers? Yes. It supports high-power USB-C PD chargers up to 150W. Can it measure charging cable quality? Yes. It measures cable impedance from 1Ω to 999.9Ω. Does it display temperature? Yes. It includes an internal temperature sensor with a range of 0°C to 80°C. Does it require batteries? No. It is powered directly from the connected USB source. Can it measure power bank capacity? Yes. It records charging capacity in mAh and mWh. Does it support fast charging protocols? Yes. It can monitor USB D+ and D− voltages, helping identify fast charging protocol handshakes.
MAS830L Digital LCD Multimeter with Backlight | AC/DC Voltage Current Resistance Tester
[Measuring Instruments] The MAS830L Digital LCD Pocket Multimeter with Backlight is a compact, accurate, and reliable electrical measuring instrument designed for everyday testing and troubleshooting. Built for technicians, students, hobbyists, and DIY electronics users, this multimeter supports measurement of AC voltage, DC voltage, DC current, resistance, continuity, and diode testing in a convenient handheld format. Equipped with a clear LCD display and built-in backlight, the MAS830L allows easy reading of measurements even in low-light working conditions. Its manual range selector dial provides simple and precise control over measurement ranges, while automatic polarity indication helps prevent reading errors. Designed with durability and portability in mind, this pocket-size multimeter features a strong impact-resistant body and lightweight construction, making it ideal for both field work and bench testing. The included test leads allow immediate use for checking batteries, circuits, wiring, power supplies, and electronic components. With stable performance, essential protection features, and user-friendly operation, the MAS830L is an excellent choice for electrical maintenance, electronics repair, lab experiments, educational training, and home diagnostics. Whether you are testing voltage, checking continuity, or measuring resistance, this multimeter delivers dependable results at an affordable price. ⭐ Key Features ✔ Measures AC & DC Voltage ✔ Measures DC Current ✔ Resistance Measurement ✔ Continuity Test with Buzzer ✔ Diode Test Function ✔ LCD Display with Backlight for low-light use ✔ Compact pocket-size design ✔ Manual range selection for accuracy ✔ Automatic polarity indication ✔ Lightweight and portable ✔ Ideal for beginners and professionals 🔧 Technical Specifications Model: MAS830L Display: LCD Digital with Backlight Display Count: 3½ digit (1999 count) Range Selection: Manual Polarity: Automatic indication Low Battery Indicator: Yes Measurement Ranges DC Voltage: 200mV / 2V / 20V / 200V / 600V AC Voltage: 200V / 600V DC Current: 200µA / 2mA / 20mA / 200mA / 10A Resistance: 200Ω / 2kΩ / 20kΩ / 200kΩ / 2MΩ Test Functions Continuity with buzzer Diode test Transistor hFE test (model variant dependent) Power Supply: 9V Battery (6F22) Operating Temperature: 0°C to 40°C (typical) Form Factor: Handheld / Pocket Body Material: Impact-resistant plastic 🎯 Applications Electrical troubleshooting Electronics repair & assembly Battery testing Circuit diagnostics DIY electronics projects Educational laboratories Home & industrial maintenance 📦 Package Includes 1 × Unity MAS830L Digital Multimeter 1 × Test Lead Pair 1 × User Manual (if included by batch)
Out of stockZB2L3 18650 Li-ion Lithium Lead-acid Battery Capacity Meter Discharge Tester Analyzer
[Battery Capacity Tester] Description: Material: Electrical components Color: See pictures ZB2L3 battery capacity tester discharge type 1.2-12V external load capacity of the battery and other tests 18650 Tools, single-function, by controlling the load off and get real-time integrated discharge current capacity results Maximum support 15V 3A discharged through the discharge voltage and current, itself does not discharge Maximum capacity statistics support 9999Ah (9999000mAh) Automatically identifying and developing appropriate battery termination voltage can also be manually adjusted Specifications: Power supply voltage: DC4.5-6V (micro USB connector) Operating Current: less than 70mA Discharge voltage: 1.00V-15.00V 0.01V resolution Termination voltage range: 0.5-11.0V Supported by current: 3.000A 0.001A resolution Maximum voltage measurement error: 1% + 0.02V Maximum current measurement error: 1.5% + – 0.008A Maximum battery capacity range: 9999Ah (1Ah = 1000mAh) greater value by shifting the decimal point to switch, when the display is less than 10Ah X.XXX, as shown above to achieve 10Ah XX.XX, and so on. Board size: 50mmX37mm Finished Size: 50mmX37mmX17mm (length X width X height maximum position size, contains copper foot height) Instructions: 1. The first test should be a fully charged battery. 2. Connect the battery to be tested positive to positive input, a negative input to the negative, can not be reversed (with load reversal may damage the circuit)! Load connected to the output of the positive and negative output, to work through the tester micro USB power supply (not available desktop or laptop USB powered), then the battery voltage. 3. Direct start test need only one press of the “OK” button, the tester can automatically develop an appropriate termination voltage of the battery full charge voltage, and will start flashing after the test three times. Need to develop artificial termination voltage only when the battery voltage display state by pressing “+” or “-” buttons to modify the termination voltage display beginning with P, behind the representative voltage resolution 0.1V, set up after pressing the “OK “start testing. 4. After the start of the test the tester will control the load of the electronic switch is turned on, the test data shows that the process will release capacity (Ah), current discharge current (A) and battery voltage (V) between the wheel was. When the battery voltage reaches the set cut-off voltage, load control switches off the tester display data stays in capacity (Ah) and above and the corresponding indicator flashes quickly together, now displays the actual capacity of the battery is discharging capacity, about the press “OK” to terminate flashing allows stable data display, press again “OK” button to return to the power-on state can just replace the battery test the next section …… Error codes and their meanings: Err1: battery voltage is above 15V Err2: battery voltage is lower than the termination voltage Err3: Battery can not afford to load or discharge current line too much resistance Err4: overcurrent (current exceeds 3.1A) Err5:Improper use or incorrect wiring has caused the device to be burned out and cannot be used (current sampling or control switch MOS burned out). Note: Use the resistance of the discharge process, resistive load will seriously heat, please pay attention to safety! This circuit voltage in order to improve the measurement accuracy, specially designed DC bias, when the terminal displays nothing then a small voltage does not affect the actual measurement, if you are shorting the input terminals (absolute 0V) will show 0 No retail package Quantity:1Pc Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!! Package Content: 1Pc x battery capacity tester 2Pc x Load resistor Power Battery Capacity Tester LED Display Micro USB Li-ion Lithium 18650 External Load Battery Discharge Testing Analyzer
RC3563 Battery Internal Resistance Tester – Handheld Battery Analyzer
[Battery Capacity Tester] RC3563 Battery Internal Resistance Tester – High Precision Battery Resistance & Voltage Meter The RC3563 Battery Internal Resistance Tester is a professional handheld measuring instrument designed for accurate testing of battery internal resistance, battery voltage, and low-value resistance. Using the Kelvin 4-wire measurement method, it minimizes errors caused by lead and contact resistance, providing stable and precise readings. Featuring an LCD display, USB rechargeable operation, and a compact portable design, the RC3563 is suitable for testing Li-ion, LiFePO₄, NiMH, NiCd, Lead-Acid batteries, capacitors, resistors, and other low-resistance components. It is ideal for battery maintenance, EV battery inspection, manufacturing, laboratories, electronics repair, and DIY applications. ⭐ Key Features Simultaneous measurement of internal resistance and voltage High-precision Kelvin 4-wire testing technology Low-resistance measurement capability Clear LCD digital display Portable handheld design 5V USB rechargeable operation Stable and accurate measurement algorithm Suitable for lithium, nickel, and lead-acid batteries Suitable for capacitor and resistor low-resistance testing Ideal for laboratory, industrial, repair, and DIY applications 📋 Technical Specifications Product Type: Battery Internal Resistance Tester Model: RC3563 Measurement Type: Internal Resistance & Voltage Test Method: Kelvin 4-Wire Display: LCD Screen Charging Input: 5V DC Power Supply: Built-in Rechargeable Battery Supported Batteries: Lithium, LiFePO₄, Nickel, Lead-Acid Additional Function: Low Resistance Measurement Design: Handheld Portable Device 🔧 Applications 18650 Battery Testing 21700 Battery Testing Lithium Battery Testing LiFePO₄ Battery Testing Battery Pack Testing EV Battery Inspection UPS & Inverter Battery Testing Lead-Acid Battery Diagnostics Battery Manufacturing & Quality Control Electronics Repair & Servicing Laboratory Testing Capacitor Testing Low Resistance Measurement ⚠️ Precautions Ensure correct polarity when connecting the test probes. Do not short-circuit the test leads. Use only a 5V charging input. Handle the test clips carefully for accurate measurements. Keep the tester away from water and excessive humidity. Avoid extreme temperatures. 📦 Package Includes 1 × RC3563 Battery Internal Resistance Tester 1 × Kelvin 4-Wire Test Lead Set 1 × USB Charging Cable 1 × User Manual
Out of stock12-84V or 7-120V Battery Power Display Meter Lithium Battery Power Display GY-6GS Green Battery Indicator Pro
[Battery Capacity Tester] Introducing 12-84V or 7-120V Battery Power Display Meter design to accurately monitor battery capacity. This 12-84V or 7-120V Lithium Battery Capacity Meter GY-6GS Green Display is ideal for a range of applications to ensure precise voltage and capacity reading. It is also compatible with lithium and iron lithium battery. This meter also provide real time data with a bright, clear LCD screen. This Lithium Battery Capacity Meter feature a use friendly double button design for quick setup. It allows users to manually switch between battery percentage, voltage, and power off functions. The automatic cycling display and settable auto off function enhance convenience and efficiency. With the 12-84V or 7-120V GY-6GS battery capacity meter, you get an intuitive and reliable tool. The waterproof surface and long-lasting buttons add to its durability. Its alarm function alerts you when the power drops below 20%, ensuring optimal battery management. Features Wide Voltage Compatibility: This Battery capacity meter display support a wide voltage range from 12-84V or 7-120V . It accurately measures and display both lithium and lead acid battery level. Clear and Intuitive Display: The high quality LCD with green backlit ensure visibility from every angle. It clearly shows battery percentage, voltage, and status in various lighting condition. User Friendly Design: It is also equipped with a comfortable, long lasting button and waterproof PVC film. The built in buckle allow for easy screw free installation on various device. Safety and Convenience Feature: The backlight flashes an alarm when power drops to 20% or below. It include a switch to turn off power & prevent from consumption when not in use. Customizable Settings: Easily set preferences with the double button design in just seconds. The meter features automatic and manual display cycles, auto off delay, and dual discharge curve option. Specification Voltage Range: 7-120V Battery Type Compatibility: Lithium Battery, Display Type: LCD Display Color Background: Green Measurement Accuracy: ±1% Operating Temperature: -10°C to 65°C Power Consumption: <20mA Dimensions: 61mm x 33mm x 13mm Setting Instruction of 12-84V or 7-120V Battery Power Display Meter Lithium Battery Power Display GY-6GS Green Battery: Long press the Set key, power supply to the product, enter the setup interface Press the Set key to select the battery specification ( Lithium battery (L), Fe battery(F), Lead Acid(P)) Short press the Function key to select the number of battery strings (increasing for the set button, decreasing for function button) Long press the Function key to set s mode. 12-84V or 7-120V any model can dispatch depends on stock. Package Contains : 1 x 7-120V Battery Power Display Meter Lithium Battery Power Display GY-6GS Green Lithium Battery
Out of stockDigital Multimeter Small Yellow Color LCD AC DC Measuring Voltage Current
[Measuring Instruments] A multimeter or a multitester, also known as a VOM (Volt-Ohm meter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter would include basic features such as the ability to measure voltage, current, and resistance. Analog multimeters use a microammeter whose pointer moves over a scale calibrated for all the different measurements that can be made. Digital multimeters (DMM, DVOM) display the measured value in numerals, and may also display a bar of a length proportional to the quantity being measured. Digital multimeters are now far more common than analog ones, but analog multimeters are still preferable in some cases, for example when monitoring a rapidly-varying As the name suggests it is the multifunction device for all your testing need for daily work. When testing DC voltage, AC voltage, DC current, resistance, diode, buzzer, and battery, connect the red test lead to “VΩmA” jack and black test lead to “COM” jack, whereas When you need to test the current more than 200mA, connect the red test lead to “‘ 10A≡” jack and black test lead to “COM” jack. And When while testing the temperature, connect the temperature probe to “VΩmA” jack or “COM” jack. When testing the magnifying ratio of the transistor, turn the switch to hFE position and connect the transistor to the eight hole jack available in blue color. For the Square wave output, the frequency is 50Hz, the voltage is approximately 3Vp-p. The output jack is “VΩmA” and “COM” Description Table: Features : Small size makes it comfortable in many areas Brand new product. Good for newbies with basic knowledge of VI. No warranty on this product. No replacement or refund on this product Package Include: 1 x Digital Multimeter Small Yellow color and LCD display 2 x Measuring Probes(Red and Black)
Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
[Servo Motor] Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control offers 3 modes to check servos or ESC. The Manual Mode allows you to turn the knob to different speeds and check the reaction time. The Neutral mode makes the servo go back to the neutral point. The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible. Plus, this servo tester can connect to up to 3 servos simultaneously. You can also connect up to 3 ESCs to test and compare their reaction time respectively. Click and order now! Operation Modes :- Automatic mode:- Operates servos to their end point and back “window wiper” mode: Make the servo swing like window wipers in the biggest angle Manual mode:- Turn the knob with different speed, check the reaction time Neutral / Center mode:- Centers servos to their neutral position Ideal for when setting servos up in a model Features of Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control :- Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control Operating Voltage: DC 4.8-6V Offer 3 modes to check servos or ESC The Manual Mode allows you to turn the knob to different speeds and check the reaction time The Neutral mode makes the servo go back to the neutral point The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible Connect to up to 3 servos simultaneously Connect up to 3 ESCs to test and compare their reaction time respectively Built with LED indicators Output signal: 1.5ms±0.5ms Size: 36.5 x 31.0 x 22mm
Out of stockXH-M240 Battery Capacity and Discharge Energy Testing Meter For 18650 Lithium-Ion Battery
[Battery Capacity Tester] This battery capacity tester is used to test the voltage, discharge capacity, and discharge energy of a 18650 lithium battery. With a dual working power supply, it has high working efficiency and saves your time. It can display discharge capacity and discharge energy. And it supports a parameter memory function, convenient for checking next time. Features: Made of high-quality electronic components Solid, durable, good conductivity and performance Long service life Package Includes: 1 x XH-M240 Battery Capacity and Discharge Energy Testing Meter