All products · 14 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
L298P Motor Driver Shield
L298P motor driver shield or relative driver shield.
Out of stockCat6a Ethernet Cable 3m
Cat6a SFTP shielded, 10 Gbps, 500 MHz, snagless boots.
Out of stockCat7 Ethernet Cable 5m
Cat7 SFTP shielded, 10 Gbps, 600 MHz. Future-proof networking.
SanDisk Optimus GX Pro 8100 1TB PCIe Gen5 x4 NVMe M.2 SSD
[Storage] SanDisk Optimus GX Pro 8100 1TB PCIe Gen 5x4 M.2 2280 NVMe SSD Next-generation PCIe 5.0 speed beast delivering up to 14,000 MB/s sequential read and 12,000 MB/s sequential write performance. Powered by 232-layer 3D TLC NAND and advanced multi-core controller with thermal throttling shield. ⭐ Key Features - Blistering speeds up to 14,000 MB/s Read / 12,000 MB/s Write - PCIe Gen5 x4 NVMe 2.0 interface - DirectStorage API acceleration for near-instant game loading - Dynamic SLC caching and DRAM cache buffer - 1,200 TBW endurance rating 📋 Technical Specifications - Form Factor: M.2 2280 - Interface: PCIe Gen 5.0 x4 - TBW: 1200 Terabytes Written - MTTF: 2.0 Million Hours 📦 Package Includes - 1 x SanDisk Optimus GX Pro 8100 1TB Gen5 NVMe SSD
Out of stockPCI Slot Cover Bracket (3 pc)
Black perforated rear slot covers, EMI-shielded.
ZK-MT21 bluetooth 5.0 Subwoofer Amplifier Board 50WX2+100W 2.1 Channel Power Audio Stereo Amplifier Tone Board Bass AMP AUX
[Amplifier Board] ZK-MT21 2.1 Channel Bluetooth 5.0 Audio Amplifier Module – 50W × 2 + 100W Subwoofer The ZK-MT21 2.1 Channel Bluetooth Audio Amplifier Module is a compact high-power stereo amplifier board designed for DIY Bluetooth speaker and home audio projects. It supports Bluetooth 5.0 and AUX audio input and provides dedicated left, right and subwoofer channels with adjustable volume, bass, treble, subwoofer volume and subwoofer frequency controls. With a suitable DC power supply and properly matched speakers, the module can deliver up to 50W + 50W for the left/right channels and up to 100W for the subwoofer channel. The board includes protection against reverse connection, overheating, overcurrent and short circuit. ⭐ Key Features Model: ZK-MT21 2.1 channel stereo audio amplifier Bluetooth 5.0 wireless audio input Bluetooth transmission distance up to approximately 15 meters under suitable conditions AUX wired audio input Left + Right + Subwoofer output Output up to 50W × 2 + 100W subwoofer Supports 4Ω–8Ω speakers Adjustable main volume Adjustable bass and treble for left/right channels Adjustable subwoofer volume Adjustable subwoofer frequency Subwoofer frequency adjustment range 20Hz–200Hz Reverse-polarity protection Overheat protection Overcurrent protection Short-circuit protection Compact amplifier board design Suitable for DIY Bluetooth speaker projects 📋 Technical Specifications Product Name: 2.1 Channel Audio Amplifier Module Model: ZK-MT21 Bluetooth Version: 5.0 Bluetooth Range: Approximately 15m Bluetooth Shielding: No shielding Audio Input: AUX + Bluetooth Channel: 2.1 Input Sensitivity: 500mV Amplifier Chip Solution: Domestic power amplifier chip Power Supply: DC 12–24V Recommended Supply Current: 5A or above Left Channel Output: <50W Right Channel Output: <50W Subwoofer Output: <100W Total Configuration: 50W × 2 + 100W Compatible Speaker Impedance: 4–8Ω Recommended Speaker Power: 20–100W Subwoofer Frequency Adjustment: 20Hz–200Hz Product Dimensions: 93 × 90 × 22mm Package Weight: Approximately 185g Protection: Reverse connection, overheat, overcurrent and short circuit ⚠️ Power Supply Warning:Do not connect this module directly to a 24V battery pack. Use a suitable regulated DC power supply as specified for the module. 🎛️ Control Functions MAIN-VOLUME: Controls the overall volume of the left, right and subwoofer channels. R&L CHANNEL-BASS: Adjusts bass level for the left and right channels. R&L CHANNEL-TREBLE: Adjusts treble level for the left and right channels. SUBWOOFER-VOLUME: Controls the subwoofer volume. SUBWOOFER-FREQ: Adjusts the subwoofer cutoff frequency from approximately 20Hz to 200Hz. 🔊 Speaker Selection Left and right channels can be connected to 4Ω–8Ω full-range or mid/high-frequency speakers. Recommended speaker power is 20W–100W. The subwoofer output should be connected to a suitable subwoofer speaker, not a regular full-range speaker. The subwoofer should have suitable low-frequency performance, with the source information recommending a frequency capability of at least 50Hz. Speaker impedance and power should be matched correctly with the amplifier. 🔌 Power Supply Selection The power supply is important for achieving proper amplifier performance and sound quality. A power supply with excessive ripple may increase background noise. Recommended supply: 18V / 19V / 24V with current above 5A Lower-voltage or lower-current supplies can be used, but available output power will be reduced. Insufficient supply current can cause voltage drop, abnormal operation or poor sound quality. If the amplifier is operated near maximum volume, an inadequate power supply may result in distortion. The power supply should have sufficient capacity for the actual amplifier load. Higher supply voltage can provide greater available output power within the module's specified operating range. 📱 Bluetooth & AUX Input The ZK-MT21 provides two audio input methods: Bluetooth Bluetooth 5.0 wireless audio input Bluetooth is the preferred input mode according to the supplied product information. Bluetooth supports automatic reconnection. Once Bluetooth is successfully connected, the module operates in Bluetooth mode. AUX Connect an external audio source through the AUX input. When using AUX, ensure the Bluetooth connection has been disconnected if necessary. 🔧 Applications DIY Bluetooth speakers 2.1 channel speaker systems Home audio projects Portable audio systems Subwoofer amplifier projects Custom speaker cabinets Desktop speaker systems Multimedia speaker systems Electronics and audio DIY projects Replacement/custom amplifier systems 🛠️ Installation & Usage Connect a suitable DC 12–24V power supply to the amplifier module. Connect the left and right speakers to their respective output terminals. Connect a suitable subwoofer to the subwoofer output. Ensure the speaker impedance is within the supported 4–8Ω range. Connect the audio source through Bluetooth or AUX. Adjust the main volume, bass, treble, subwoofer volume and frequency according to your requirements. Start with a low volume and gradually increase it. Ensure adequate ventilation and heat dissipation during high-power operation. ⚠️ Important Precautions Do not connect directly to a 24V battery pack. Use a suitable regulated DC power supply. Do not reverse the power supply polarity. Do not short-circuit the speaker outputs. Do not exceed the recommended speaker power and impedance. Ensure the power supply can provide sufficient current. Insufficient power may cause distortion or abnormal operation. Excessive load can cause the amplifier to heat up and activate thermal protection. Provide adequate ventilation during high-power operation. If distortion occurs at high volume, reduce the volume or use a more suitable power supply. The amplifier's actual output depends on the power supply, speaker impedance, audio input and overall system configuration. 📦 Package Includes 1 × ZK-MT21 Bluetooth 5.0 2.1 Channel Audio Amplifier Module
Wuzhi Audio ZK-MT21 Bluetooth 5.0 Subwoofer Amplifier Board 50WX2+100W 2.1 Channel Power Audio Stereo Amplifier Tone Board Bass AMP AUX
[Amplifier Board] Tip: Only when the audio input is sufficient and the power supply voltage/current is sufficient, there will be sufficient output power. The higher the power supply voltage, the greater the output power, and the smaller the speaker impedance, the greater the output power. Please make sure that the power of the adapter power supply is greater than the actual working power of the amplifier! You can check our others amplifier boards here. FAQ: 1. How to choose a power supply? The power supply with the board is very important. The ripple of the selected power supply must be small. A power supply with a large ripple will cause the bottom noise of the power amplifier board to become larger and there will be current noise. The higher the voltage, the greater the current, and the more adequate the output power. The power supply is 12V1A and can be equipped with 3-4inch speakers. If it is above 19V 5A, there is no problem with 8-10 inches, and the power supply must be highly regarded. If the voltage is too low, the amplified sound will easily cause sound distortion. If the current is too low, the speaker will pull down the voltage, which will result in abnormal operation or poor sound quality. It is recommended to use a power supply of 18V19V24V with a current above 5A. If you only have 9V12V or 1A 2A power supply, it can be used but the power is low. When the volume is selected close to the maximum, it may be distorted and affect the sound quality. 2. How to choose a speaker? Regarding speaker types: commonly used speakers are generally 4-8 ohms, which can be used. The left and right channel speakers need to be connected to full-range speakers or mid- to high-frequency speakers, and the power is between 20W-100W. The subwoofer speaker cannot be connected to an ordinary speaker, and a speaker with a subwoofer speaker must be connected with a power between 20-100. The dive frequency of the subwoofer speaker must be at least 50 Hz. If your speaker has a low power, such as between 20W-50W, it can be used. You need a lower power supply voltage to prevent the speaker from burning after amplifying the sound. For example, choose a power supply below 15V. If you are a 50W-100W speaker, don't worry about the problem of speaker burnout. You can choose a 12-24V power supply. The higher the selected voltage, the greater the sound or power that can be output. The speaker power should not exceed 100W, otherwise it will affect the sound quality. 3. Introduction to audio input mode This audio power amplifier module has two audio input methods: one is Bluetooth input, the other is AUX input, Bluetooth mode is preferred. Bluetooth can be connected in any mode. As long as the Bluetooth connection is successful, it is in Bluetooth mode, and the Bluetooth mode supports automatic connection back. When Bluetooth is not connected, AUX plug-in is in AUX mode. It should be note that when using AUX mode, you need to confirm that the Bluetooth connection of this module has been disconnected. 4. How to adjust the main volume? The MAIN—VOLUME knob adjusts the main volume. Right-handed main volume increases, left-handed main volume decreases. The main volume affects the volume of the left and right channels and the subwoofer. 5. How to adjust the left and right channel high and low sounds? The R&L CHANNEL—BASS knob controls the bass, right-turning bass enhancement, left-turning bass attenuation. When the knob is in the rightmost position, the bass is neither enhanced nor attenuated. The R&L CHANNEL—TREBLE knob controls the treble, the right-handed treble is enhanced, and the left-handed treble is attenuated. When the knob is in the middle position, the high pitch is neither enhanced nor attenuated. Note when adjusting the treble and bass: when the treble or bass is adjusted to the maximum by turning right, if the sound is distorted, the gain of the treble or bass adjustment is too large. You need to turn the treble or bass knob to the left to lower the gain or turn the right Turn the MAIN-VOLUME knob to the left to reduce the total volume. 6. How to adjust the subwoofer? SUBWOOFER—VOLUME knob is used to control the volume of the subwoofer. Right-handed volume increases, and left-handed volume decreases. The SUBWOOFER—FREQ knob controls the cutoff frequency of the subwoofer. The right-hand frequency increases, and the left-hand frequency decreases. The frequency adjustment range is 20HZ-200HZ. 7. The voice is small and okay. When the voice becomes louder, the voice becomes muddy? The sound is distorted, please turn down the total volume or change to a higher voltage adapter power supply. 8. The sound is small, but when the sound becomes louder, the sound freezes? If the input power is insufficient, the power supply itself is protected against intermittent power failure. Please replace it with a higher-power power supply; or if the power is too large, the power amplifier board will generate serious heat and thermal protection has occurred. Reduce power usage or enhance heat dissipation. 9. What factors are related to the sound quality? The sound quality is not only related to the power amplifier module, but also related to the power supply, sound source, and the entire audio system. Basically, every aspect of the audio system will affect the sound quality, among which the main links are the audio transmission line, the audio power supply, the tone circuit, the power amplifier circuit, the speakers and the surrounding environment. The sound quality is the best only when the sound source, power supply, amplifier module and speakers are matched. Feature: Product Name: 2.1 channel audio amplifier module Product Model: ZK-MT21 Bluetooth Version: 5.0 (no shielding, 15 meters) Input Sensitivity: 500mV Audio Input: AUX + Bluetooth Channel: 2.1 Chip Solution: Domestic power amplifier chip Power Range: DC 12-20 V / 5A above (Do not connect to 24V battery pack) Adapter Speaker: 20-100 W, 4-8 Ω Output Power: Left and right channels <50W, Subwoofer <100W Protection Mechanism: Anti reverse connection. Overheat. Overcurrent. Short circuit Product Dimensions: 93mm*90mm*22mm Package Weight : about 185g (packaging) Package Includes: 1 x ZK-MT21 bluetooth 5.0 Subwoofer Amplifier Board 50WX2+100W 2.1 Channel Power Audio Stereo Amplifier Tone Board Bass AMP AUX
Waterproof Case Switch Covers Caps Protector for Boat Rocker Switch
[Mechanical Switches] Clear Silicone Waterproof Rocker Switch Protector Cover Cap Transparent Rocker Switch Cover • Waterproof & Dustproof • Flexible Silicone Protection • Durable Switch Guard The Clear Silicone Waterproof Rocker Switch Protector Cover Cap is a flexible protective cover designed to shield rocker switches from water, dust, moisture, dirt, and accidental contact. Made from high-quality transparent silicone, this cover provides reliable protection while allowing the switch position to remain clearly visible. Its soft and flexible construction makes installation quick and easy, and it fits a wide range of standard-size rocker switches used in automotive, marine, industrial, household, and DIY electronic applications. The cover helps extend switch life by preventing contamination and reducing wear caused by environmental exposure. Ideal for cars, motorcycles, boats, electrical control panels, industrial equipment, power supplies, DIY projects, and outdoor electronic devices, this protector cap offers a simple and effective way to improve switch durability and reliability. ⭐ Key Features Transparent clear silicone design Waterproof and dustproof protection Protects rocker switches from moisture and dirt Flexible and durable silicone construction Easy installation and removal Allows clear visibility of switch position Helps extend switch lifespan Suitable for indoor and outdoor use Lightweight and compact Compatible with various standard-size rocker switches 📋 Technical Specifications Product Type: Rocker Switch Protector Cover Cap Color: Clear / Transparent Material: Silicone and Plastic Protection Type: Waterproof and Dustproof Compatibility: Standard-Size Rocker Switches Installation: Push-Fit Operating Temperature: Suitable for General Electronic Applications Reusable: Yes 🔧 Applications Rocker Switch Protection Automotive Switch Panels Marine and Boat Switches Motorcycle Electrical Systems Industrial Control Panels Power Supply Units Household Electrical Equipment DIY Electronics Projects Outdoor Electrical Installations Dust and Moisture Protection Applications 📦 Package Includes 1 × Clear Silicone Waterproof Rocker Switch Protector Cover Cap ⚠️ Note Ensure the cover size matches your rocker switch dimensions before installation. Designed for water and dust protection, not for complete submersion. Product appearance may vary slightly depending on the manufacturing batch.
Out of stockCapacitive Soil Moisture Sensor
[Moisture Sensor] This Capacitive soil moisture sensor measures soil moisture levels by capacitive sensing rather than resistive sensing like other sensors on the market. It is made of corrosion-resistant material which gives it excellent service life. Insert it into the soil around your plants and impress your friends with real-time soil moisture data! This module includes an onboard voltage regulator which gives it an operating voltage range of 3.3 ~ 5.5V. It is perfect for low-voltage MCUs, both 3.3V, and 5V. For compatibility with a Raspberry Pi, it will need an ADC converter. This soil moisture sensor is compatible with our 3-pin “Gravity” interface, which we can connect to the Gravity I/O expansion shield. Applications: Garden plants Moisture detection Intelligent agriculture Note: This module is available in different versions. The V1.2 version sensor can work with only 5v while the V2.0 version sensor works with both 3.3V and 5V Circuit Diagram of Moisture Sensor Compatible with Arduino and Display: Software Arduino IDE V1.6.5 Click to Download Arduino IDE Features: Supports 3-Pin Gravity Sensor interface Analog output Package Includes: 1 x Capacitive Soil Moisture Sensor
Out of stockMini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560
[Brushed DC motor Driver] Mini Motor Drive Shield Expansion Board L293D Module for Arduino UNO MEGA 2560 is a Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoids, DC and stepping motors) and switching power transistors. To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included. This device is suitable for use in switching applications at frequencies up to 5 kHz. Features: Enable facility. Overtemperature protection. Logical “0” input voltage up to 1.5V(High noise immunity). Internal clamp diodes. Package Includes: 1 x Mini Motor Drive Shield Expansion Board L293D Module.
Solderless 400 pin breadboard – Normal Quality
[Breadboard and Zero PCBs] 400 Tie Points – Solderless Breadboard is a high-quality breadboard with power lanes and printed top face for easy prototyping. A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connections and replace components. It is Reusable for fast build a prototype of an electronic circuit – will accept transistors, diodes, LEDs, resistors, capacitors and virtually all types of components – No soldering required – Can modify or revise the circuits easily Fit for jumper wire of 0.8mm diameter – Standard 2.54mm hole spacing Adhesive sheet on the backside of the board – Multiple breadboards can be spliced together too. Specifications and features: 400 tie points 1 Double strip, Total 300 tie points 2 Power lanes, Total 100 tie points in power lanes Perfect for Arduino shield prototyping and testing Plastic housing, metal contact clips Package Includes: 1 x 400 pin breadboard – Normal Quality – Without Packing
Out of stockATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board
[Arduino Boards] The ATmel MCU ATMEGA16U2 MEGA 2560 R3 Improved Version CH340G Board is a micro-controller board base on the ATmega2560. It has a USB host interface to connect with Android based phones, base on the MAX3421e IC. It has 54 digital input/output pins (of which 15 can be used as PWM outputs); 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator; a USB connection, a power jack, an ICSP header, and a reset button. The MEGA ADK is base on the Mega 2560. Similar to the Mega 2560 and Uno, it features an ATmega8U2 program as a USB-to-serial converter. Revision 3 of the Mega ADK board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU(Device Firmware Upgrade) mode. The board has the following new features: 1.0 pin-out: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In the future, shields will be compatible both with the board that uses the AVR, which operate with 5V and with the Arduino Due which operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit. The Mega Arduino R3 Android Accessory Development Kit (ADK) can be powered via a USB connection or with an external power supply. The power source is selected automatically. External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm centre-positive plug into the board’s power jack. Leads from a battery can be inserted in the GND and Vin pin headers of the POWER connector. Because the Mega R3 Android Accessory Development Kit (ADK) is a USB Host, the phone will attempt to draw power from it when it needs to charge. When the ADK is powered over USB, 500mA total is available for the phone and board. Package Includes : 1 x Mega R3 Android Accessory Development Kit (ADK) board.
ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module
[ESP Modules] The ESP 01 ESP8266 Serial WIFI Wireless Transceiver Module is a self-contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost-effective board with a huge, and ever-growing, community. This module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application-specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, which is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts. There is an almost limitless fountain of information available for the ESP8266, all of which has been provided by amazing community support. In the useful links section below you will find many resources to aid you in using the ESP8266, even instructions on how to transforming this module into an IoT (Internet of Things) solution! Note: The ESP8266 Module is not capable of 5-3V logic shifting and will require an external Logic Level Converter. Please do not power it directly from your 5V dev board. This new version of the ESP8266 WiFi Module has increased the flash disk size from 512k to 1MB. Features : Wi-Fi Direct (P2P), soft-AP Integrated TCP/IP protocol stack It features an integrated TR switch, balun, LNA, power amplifier and matching network Equips integrated PLL, regulators, DCXO and power management units Integrated low power 32-bit CPU could be used as an application processor SDIO 1.1 / 2.0, SPI, UART STBC, 1×1 MIMO, 2×1 MIMO A-MPDU & A-MSDU aggregation & 0.4ms guard interval Wake up and transmit packets in < 2ms Standby power consumption of < 1.0mW (DTIM3) Package Includes : 1 x ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module