All products · 35 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
XH-M401 DC-DC Step Down Buck Converter Power Supply Module XL4016E1
[Step Down Buck Converter] ⚡ XL4016 12A DC-DC Step-Down Buck Converter Module Adjustable Power Supply 12A High Current • Adjustable Output • Up to 96% Efficiency • Ideal for Battery Charging & Power Supply Applications The XL4016 DC-DC Step-Down Buck Converter Module is a high-performance switching voltage regulator designed to efficiently convert higher DC input voltages into a stable, adjustable lower output voltage. Based on the XL4016 PWM Buck Converter IC, this module supports input voltages from 8V to 36V DC and provides an adjustable output voltage from 1.25V to 32V, making it suitable for a wide range of power supply applications. Capable of delivering up to 12A output current with conversion efficiencies of up to 96%, the module features built-in thermal shutdown, current limiting, and short-circuit protection for safe and reliable operation. Its compact design and excellent voltage regulation make it ideal for powering electronic projects, battery charging systems, LED lighting, industrial equipment, communication devices, and laboratory power supplies. ⭐ Features Based on the XL4016 high-performance buck converter IC Wide input voltage range of 8V–36V DC Adjustable output voltage from 1.25V–32V DC Supports output current up to 12A High conversion efficiency up to 96% Built-in thermal shutdown protection Built-in over-current protection Built-in output short-circuit protection Excellent line and load regulation Compact PCB design Suitable for battery charging and DC power applications 📋 Technical Specifications Product Type: DC-DC Buck Converter Module Model: XL4016 (XH-M401 / HW-439 / HW-674) Converter Type: Step-Down (Buck) Input Voltage: 8V–36V DC Output Voltage: 1.25V–32V DC (Adjustable) Maximum Output Current: 12A Maximum Conversion Efficiency: Up to 96% Load Regulation: ±0.5% Voltage Regulation: ±0.5% Switching Frequency: 180kHz Protection Features: Over-Current Protection Thermal Shutdown Protection Output Short-Circuit Protection PCB Size: 60 × 40 mm Operating Principle: PWM Step-Down Regulation 🔧 Applications Suitable for: Adjustable DC Power Supplies Lithium Battery Charging Lead Acid Battery Charging Solar Power Systems LED Drivers LCD Monitors LCD Televisions Portable Instruments Telecommunication Equipment Networking Equipment Robotics Projects Arduino Projects ESP32 Projects Industrial Automation DIY Electronics 📦 Package Includes 1 × XL4016 12A DC-DC Step-Down Buck Converter Module ⚠️ Note This is a step-down (buck) converter; the input voltage must always be higher than the required output voltage. Adjust the output voltage before connecting sensitive electronic devices. Product may be supplied as XH-M401, HW-439, or HW-674, depending on stock availability. All variants offer equivalent functionality.
ESP32 Development Board with WiFi & Bluetooth – CH340C USB Type-C
[ESP Modules] The ESP32 Development Board with WiFi & Bluetooth (CH340C, Type-C) is a powerful and versatile microcontroller board designed for modern wireless and IoT applications. It features a dual-core processor and integrated 2.4GHz WiFi and Bluetooth (Classic + BLE) connectivity. This board includes an onboard CH340C USB-to-Serial converter, which allows easy programming and communication without requiring an external crystal oscillator. The USB Type-C port provides a stable and reversible connection for power and data. With a wide range of GPIO pins and peripherals such as ADC, DAC, PWM, UART, SPI, and I2C, this board is perfect for building home automation systems, smart devices, IoT nodes, robotics controllers, sensor networks, web servers, and wireless projects. It is fully compatible with Arduino IDE, ESP-IDF, and MicroPython, making it suitable for beginners, students, and professional developers. 🔹 Key Features Based on ESP32 dual-core microcontroller Built-in WiFi 802.11 b/g/n and Bluetooth v4.2 (Classic + BLE) Onboard CH340C USB-to-Serial converter (no external crystal required) Modern USB Type-C connector for power and programming Dual-core CPU up to 240 MHz for high-performance applications Multiple GPIO pins with ADC, DAC, PWM support Supports Arduino IDE, ESP-IDF, and MicroPython Low-power modes including deep sleep for battery-powered projects Compact design with breadboard-friendly layout Ideal for IoT, automation, robotics, smart home, and DIY electronics 🔹 Technical Specifications Microcontroller: ESP32 CPU: Dual-core Tensilica LX6, up to 240 MHz Flash Memory: 4 MB (typical, may vary by batch) SRAM: 520 KB Wireless Connectivity: WiFi: 2.4 GHz, 802.11 b/g/n Bluetooth: v4.2, Classic + BLE USB Interface: USB Type-C USB-to-Serial Chip: CH340C Operating Voltage: 3.3 V Input Voltage: 5 V via USB Logic Level: 3.3 V GPIO Pins: 30+ multifunction pins Peripherals: ADC, DAC, PWM, UART, SPI, I2C, I2S Clock Frequency: Up to 240 MHz Programming Support: Arduino IDE, ESP-IDF, MicroPython Onboard Components: Reset & Boot buttons, voltage regulator, status LEDs Form Factor: Standard ESP32 Dev Board size 🔹 Applications Internet of Things (IoT) projects Home and industrial automation Smart home devices Robotics and motor control Wireless sensor networks Web servers and cloud-connected devices Educational and training projects DIY electronics and prototyping 🔹 Package Contents 1 × ESP32 Development Board with WiFi & Bluetooth (CH340C, USB Type-C)
400W DC-DC Step-up Boost Converter Constant Current Power Supply Module LED Driver Step Up Module
[Step UP Buck Converter] This is a great 400W DC to DC step-up power supply module for electric equipment, digital products, laptop, etc. Input and output are designed with screw terminals for convenient wire connection and disconnection. High efficiency, the maximum conversion efficiency can be 96% and efficiency is related to input/output voltage, current and voltage difference. There are 2 heat sinks that would ensure a better heat dissipation. It can also be used as a driver for high power LED lights or voltage regulator for solar panels. Features: Input and output are designed with screw terminals for convenient wire connection and disconnection. High efficiency, the maximum conversion efficiency can be 96% and efficiency is related to input/output voltage, current and voltage difference. There are 2 heat sinks that would ensure a better heat dissipation. It can also be used as a driver for high power LED lights or voltage regulator for solar panels. Output Voltage/Current Adjustment: Adjust "CV-ADJ" potentiometer clockwise to reduce voltage, counterclockwise to increase voltage. Adjust "CC-ADJ" potentiometer counterclockwise about 30 circles to minimize the output current before connecting to load(clockwise to increase current, counterclockwise to reduce current). Then adjust "CC-ADJ" clockwise to the current value you need. If you use the module for battery charging, connect to output after battery is fully discharged. Because if the more energy is left in battery, the less charging current will be. Specification: Input Voltage: DC 8.5V to 50V Output Voltage: DC 10V to 60V Max. Input Current: 15A Max. Output Current: 12A Quiescent Current: 10mA Constant Current Range: 0.2A to 12A Operating Temperature: -40° to 85° Package Included: 1 x Boost Module 400W DC-DC Step-up Boost Converter Constant Current Power Supply Module 15A Step-Up LED Driver
IC 7812 TO-220 12V Linear Voltage Regulator ST (L78M12CV/L7812CV/LM7812)
[Voltage Regulator IC] LM7812 12V Linear Voltage Regulator IC 7812 The L78M12CV is a three-terminal positive Voltage Regulator with several fixed output voltages, making it useful in a wide range of applications. This regulator can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each type employs internal current limiting, thermal shutdown and safe area protection, resulting it essentially indestructible. If adequate heat sinking is provided, they can deliver over 0.5A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltage and currents. Features- Thermal Overload Protection Short-circuit Protection Output Transition SOA Protection 4% Output Voltage Tolerance Guaranteed in Extended Temperature Range Applications: Power Management
IC 7805 TO-220 Linear Voltage Regulator LM7805 Made ST
[Voltage Regulator IC] LM7805 5V Linear Voltage Regulator IC 7805 The L78M05CV is a fixed output, three-terminal precision positive voltage regulator in 3 pins TO-220 package. This regulator can provide local on-card regulation by eliminating distribution problems associated with single-point regulation. The L78M05CV fixed voltage regulator is designed with thermal overload protection that shuts down the circuit when subjected to an excessive power overload condition, internal short circuit protection that limits maximum current the circuit will pass and output transistor safe area compensation that reduces the output short circuit as the voltage across the pass transistor is increased. If adequate heat sinking is provided then this positive voltage regulator can deliver over 0.5A output current. Features: Fixed output voltage is 5V Output current is 0.5A Dropout voltage is 2V Maximum DC input voltage is 35V Output transition SOA protection Output voltage tolerance is 4% Operating temperature range 0°C to 125°C Applications: Power Management. Note: Image may vary from actual product in terms of Manufacturer/Brand name according to availability.
Out of stock5V 10A SMPS – 50W – DC Metal Power Supply
[SMPS] 5V 10A SMPS – 50W – DC Metal Power Supply Non Water Proof A switched-mode power supply is an electronic power supply that incorporates a switching regulator to convert electrical power efficiently. Like other power supplies, an SMPS transfers power from a DC or AC source (often mains power) to DC loads, such as a personal computer, while converting voltage and current characteristics. Unlike a linear power supply, the pass transistor of a switching-mode supply continually switches between low-dissipation, full-on and full-off states, and spends very little time in the high dissipation transitions, which minimizes wasted energy. Please find out our others power supply, Click here Features/Specs: Input Voltage: AC 100 – 264V 50 / 60Hz Output Voltage: 5V DC, 10A Total Power: 50 W Protections: Overload / Over Voltage / Short Circuit Auto-Recovery After Protection Universal AC input / Full range 100% Full Load Burn-in Test Cooling by Free Air Convection High Quality and High Performance LED power supply with a metal body for hidden installation for LED lighting Design with Built-in EMI Filter, improve signal precision. No Minimum Load. Compact Size Light Weight. High Efficiency, Reliabiltiy & low energy consumption Category – Switch Mode Power Adaptor (SMPS) MTBF >50,000 hours Output Type – DC Output – 5Volts 10Amp Shell Material: Metal Case / Aluminum Base Color: Sliver IN-DOOR USE ONLY! Package Includes: 1 x 5V 10A SMPS – 50W – DC Metal Power Supply Non Water Proof Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
Small Aluminium Heat Sink for TO-220 Package Black
[Aluminium Heat Sink] Heat Sink-TO220 Package- Black Anodized Heatsink to dissipate heat from any TO-220 package like 7805 voltage Regulators, Mosfets, transistors, etc. Generally used to keep voltage regulators and motor drivers cool, and efficient, and increases the reliability of the components. Feature/Specs: Package: TO220 PI49 Material: Aluminum Color: BLACK Processing method: Extruded Uses in Regulator, Mosfet, IGBT, High Power Transistor, IC, VGA, LED, RAM, Prevents overheating of the board, etc. Absorbs heat quickly Fast cooling High-temperature dissipation Quantity of blade: 4 Size: 22mm Blade thickness: 1mm Dimensions: 22 x 16 x12.5mm Approx Weight: 17gm Package Includes: 1x Heat Sink-TO220 Package-PI49 Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
1.8 Inch TFT LCD Module 128 x 160 with SPI
[LED/LCD Display Module] Since the 1.8 Inch TFT LCD Module display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available! The 1.8″ display has 128×160 colour pixels. Unlike the low cost “Nokia 6110” and similar LCD displays, which are CSTN type and thus have poor colour and slow refresh, this display is a true TFT! The TFT driver (ST7735R) can display full 18-bit colour (262,144 shades!). And the LCD will always come with the same driver chip so there are no worries that your code will not work from one to the other. The breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as an ultra-low-dropout 3.3V regulator and a 3/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full-colour bitmaps from a FAT16/FAT32 formatted microSD card. For more displays click below, LED/LCD Display Features : 1.8-inch serial SPI colour display module Support analogue SPI and hardware SPI The LCD has a wide viewing angle, the contrast is also very suitable. Good quality display. Package includes: 1 x 1.8 Inch TFT LCD Module 128 x 160 with 4 IO
Mini MP1584 DC-DC 3A Adjustable Buck Module
[Step Down Buck Converter] The Mini MP1584 DC-DC 3A Adjustable Buck module is ultra small adjustable 0.8V to 20V output DC to DC step-down Buck converter that uses an MP1584EN high frequency switching regulator and integrated high voltage power MOSFET. It features a soft start, thermal shutdown, and under-voltage lockout (UVLO) to protect the module from operating at insufficient supply voltage. Small size, lightweight, low internal power consumption, and wide input voltage range of 4.5V to 28V make this module suitable for a variety of different applications where small size and lightweight voltage conversion is needed, including RC cars and airplanes, quadcopters, robotics, Arduino modules, and DIY devices. Applications: DIY 8051 / AVR / ARM / PIC / Arduino / Raspberry-Pi projects Robotics Breadboard power supply Manual speed adjustment of small DC motors Power Supply for RC project planes, cars, helicopters Universal Battery Elimination Circuit (UBEC) for 2S-6S lipo battery pack Receiver/servo power supply Communications equipment power supply Mobile equipment power supplies Note: PCB board color may be different from the actual product. Features: Wide 4.5V to 28V Operating Input Range High-Efficiency Pulse Skipping Mode for Light Load Ceramic Capacitor Stable Internal Soft-Start Internally Set Current Limit without a Current Sensing Resistor
Out of stockCapacitive Soil Moisture Sensor
[Moisture Sensor] This Capacitive soil moisture sensor measures soil moisture levels by capacitive sensing rather than resistive sensing like other sensors on the market. It is made of corrosion-resistant material which gives it excellent service life. Insert it into the soil around your plants and impress your friends with real-time soil moisture data! This module includes an onboard voltage regulator which gives it an operating voltage range of 3.3 ~ 5.5V. It is perfect for low-voltage MCUs, both 3.3V, and 5V. For compatibility with a Raspberry Pi, it will need an ADC converter. This soil moisture sensor is compatible with our 3-pin “Gravity” interface, which we can connect to the Gravity I/O expansion shield. Applications: Garden plants Moisture detection Intelligent agriculture Note: This module is available in different versions. The V1.2 version sensor can work with only 5v while the V2.0 version sensor works with both 3.3V and 5V Circuit Diagram of Moisture Sensor Compatible with Arduino and Display: Software Arduino IDE V1.6.5 Click to Download Arduino IDE Features: Supports 3-Pin Gravity Sensor interface Analog output Package Includes: 1 x Capacitive Soil Moisture Sensor
Out of stockLM7824 24V LINEAR VOLTAGE REGULATOR 2A IC 7824
[Voltage Regulator IC] This 7824 IC is a 24 Voltage Regulator that restricts the output voltage to 24V output for various range of input voltages. So as the name suggests, the voltage regulator is a circuit that is used to regulate (fix) the voltage fluctuations in the input and therefore, makes the circuitry safer. LM7824 is an extremely popular and easy to use linear voltage regulator for generating a regulated 24V. It is a easy and simple to use voltage regulator with no external circuitry or components needed for voltage regulation (except for a few smoothing capacitors). It can provide around 500 mA of current without an heatsink and upto 2 A with an heat sink. Features : Output Voltage: 24V Output Current: 2A Thermal Overload Protection Short Circuit Protection Output Transition SOA Protection Note:This regulator has a ~2V linear drop-out. That means you must give it at least 26V to get a clean 24V out.
Out of stockLM338 5A Adjustable Positive Regulator
[Voltage Regulator] LM338 – Adjustable Positive Regulator The LM338 series are adjustable 3-terminal positve voltage regulators capable of supplying in excess-5A over a 1.2 to 32V output voltage range. They are exceptionally easy to use and require only two external resistors to set the output voltage. Further, both line and load regulation are better than standard fixed regulators. Also, LM338 regulators are supplied in standard transistor packages which are easily mounted and handled. In addition to higher performance than fixed regulators, the LM338 series offer full overload protection available only in integrated circuits. Included on the chip are current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional even if the adjustment terminal is disconnected. Feature Output Voltage Range from 1.2V to 32V Output Current up to 5A Thermal Overload Protection Output Short-Circuit Protection
Out of stockHi Link HLK 5M05 5V/5W Switch Power Supply Module
[Power Supply] HLK-5M05 5V/5W Switch Power Supply Module is plastic enclosed PCB mounted isolated switching step-down power supply module. It can supply 5V DC from 120V AC – 230V AC and has a power rating of 5 Watt. This makes it perfect for small projects that need a 5 volt supply from mains. This power supply module replaces lots of parts from the traditional power supply like diodes, voltage regulator and transformers. Therefore there are many advantages for these modules, such as low-temperature rise, low power, high efficiency, high reliability, high-security isolation etc. This Power Supply Module voltage source is a switching source, so you do not have to worry about fluctuations in voltage grid. It is designed to be mounted on the PCB and is the ideal solution to power pads that you take. It is widely used in a smart home, automation and control, communication equipment, instrumentation and other industries. Features: Meet UL, CE requirements, Ultra-thin, ultra-small All voltage input (AC: 90 ~ 264V) Low ripple and low noise Output overload and short circuit protection High efficiency, high power density The product is designed to meet the requirements of EMC and Safety Test Low power consumption, environmental protection, no-load loss <0.1W Environmental conditions: Technical indicators: Single bit Working temperature: – 20-60 +degree Storage temperature: + 80-40 -degree Relative humidity: 5-95% The cooling way: Natural cooling The atmospheric pressure: 80-106Kpa The altitude: 2000M or less. Package Includes: 1 x HLK-5M05 5V/5W Switch Power Supply Module
Small Aluminium Heat Sink for TO-220 Package
[Aluminium Heat Sink] Small Aluminium Heat Sink for TO-220 Package The Small Aluminium Heat Sink for TO-220 Package is a compact passive cooling component designed for TO-220 package transistors, voltage regulators, MOSFETs, and other low-power semiconductor devices. It helps transfer heat away from the electronic component and dissipate it into the surrounding air, helping maintain a safer operating temperature. A matching product listing confirms that this heatsink is intended for low-power dissipation and includes a mounting hole for securing a transistor or voltage regulator. Its compact size makes it particularly useful where PCB space is limited. The heatsink is made from aluminium and has a 1mm material thickness, with overall dimensions of 15 × 9 × 19mm. ⭐ Key Features Designed for TO-220 package components Made from aluminium Compact and lightweight construction Suitable for low-power heat dissipation Helps reduce semiconductor operating temperature Mounting hole for securing compatible components Suitable for transistors, voltage regulators and similar devices Easy to install on electronic components Ideal for PCB and DIY electronics projects 📋 Technical Specifications Product Type: Aluminium Heat Sink Application: TO-220 Package Material: Aluminium Length: 15mm Width: 9mm Height: 19mm Thickness: 1mm Dimensions: 15 × 9 × 19mm Weight: Approximately 1g Mounting: Screw Mount Heat Dissipation: Passive / Natural Convection Application Type: Low-Power Semiconductor Cooling The dimensions and approximately 1g weight are listed by the corresponding product listing. 🔧 Applications TO-220 Transistors Voltage Regulators MOSFETs Power Transistors Linear Regulators Small Power Supply Circuits Arduino Projects DIY Electronics PCB Projects Embedded Electronics General Semiconductor Cooling 🛠️ Installation Place the heatsink against the heat-producing surface of the compatible TO-220 component and secure it through the mounting hole using an appropriate screw and nut. For improved thermal transfer, a suitable thermal interface material or thermal compound can be used between the component and heatsink where appropriate. Ensure that the heatsink does not accidentally create an electrical short between component terminals or other PCB traces. 📦 Package Includes 1 × Small Aluminium Heat Sink for TO-220 Package ⚠️ Precautions Use only with components that are mechanically compatible with the heatsink. Ensure the heatsink is securely mounted. Check for possible electrical contact between the heatsink and component terminals. Use thermal compound or an appropriate thermal interface where required. This is intended for low-power heat dissipation; higher-power applications may require a larger heatsink or forced-air cooling.
ESP8266 NodeMCU CP2102 ESP-12E WiFi Development Board
[ESP Modules] ESP8266 NodeMCU CP2102 ESP-12E WiFi Development Board ESP8266 ESP-12E • CP2102 USB Interface • Built-in WiFi • Arduino & Lua Compatible • IoT Development Board The ESP8266 NodeMCU CP2102 ESP-12E WiFi Development Board is a compact and powerful development board designed for IoT (Internet of Things), wireless communication, home automation, robotics, and embedded system projects. Based on the highly popular ESP8266 ESP-12E WiFi module, it combines a 32-bit microcontroller, WiFi connectivity, and a CP2102 USB-to-Serial interface on a single breadboard-friendly board. The board comes preloaded with NodeMCU firmware, allowing easy programming using Lua scripting, while also offering full compatibility with the Arduino IDE, making it suitable for both beginners and advanced developers. With integrated 802.11 b/g/n WiFi, TCP/IP networking, multiple GPIO pins, PWM, I2C, SPI, and UART interfaces, it provides everything required for rapid IoT prototyping and wireless application development. The onboard CP2102 USB interface, 3.3V voltage regulator, and logic-level conversion circuitry allow direct connection to a computer for programming and power, eliminating the need for external USB-to-Serial converters. ⭐ Features ESP8266 ESP-12E WiFi module Built-in CP2102 USB-to-Serial interface 802.11 b/g/n WiFi connectivity Integrated TCP/IP protocol stack 32-bit processor with onboard memory Compatible with Arduino IDE, Lua, and NodeMCU firmware Breadboard-friendly compact design Multiple GPIO pins Supports PWM, I2C, SPI, and UART Onboard 3.3V voltage regulator Logic-level conversion circuitry included Low power consumption Ideal for IoT and wireless projects Easy plug-and-play programming 📋 Technical Specifications Product Type: WiFi Development Board Model: ESP8266 NodeMCU ESP-12E Microcontroller: ESP8266EX WiFi Standard: IEEE 802.11 b/g/n USB Interface: CP2102 Operating Voltage: 3.3V Input Voltage: 5V via Micro USB Flash Memory: 4MB CPU: 32-bit Tensilica L106 Clock Frequency: 80MHz / 160MHz GPIO Pins: Multiple Digital I/O Communication Interfaces: UART, SPI, I2C PWM Support: Yes ADC: 1 Channel (10-bit) USB Connector: Micro USB Firmware: NodeMCU (Preloaded) Programming Support: Arduino IDE, Lua, ESP8266 SDK Board Size: Approx. 58 × 31 mm 🔧 Applications IoT (Internet of Things) Projects Home Automation Smart Lighting Systems WiFi Sensor Nodes Wireless Data Logging Robotics Projects Arduino WiFi Projects ESP8266 Development Remote Monitoring Systems MQTT Applications Web Server Projects Smart Agriculture Industrial Automation DIY Electronics Educational Projects 📦 Package Includes 1 × ESP8266 NodeMCU CP2102 ESP-12E WiFi Development Board ⚠️ Note Operates at 3.3V logic levels. Install the CP2102 USB driver if the board is not detected by your computer. Use a good quality Micro USB cable for programming and power. Product appearance may vary slightly depending on the manufacturing batch.
Out of stockESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
[ESP Modules] This is ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino. This small WIFI transceiver is the perfect solution for home Automation and IoT applications. It can be the replacement of your NRF24L01, it can talk to your WIFI router directly through the UART MCU’s (Rx, Tx). The ESP-12 module is one of the most complete of the ESP family as it allows you to use the biggest amount of pins of all of them. You can program this module to work stand alone with the Arduino IDE or with LUA as NodeMCU. The system is equipped with ESP8266 manifested leading features are: energy saving VoIP quickly switch between the sleep/wake patterns, with low-power operation adaptive radio bias, front-end signal processing functions. The ESP8266-03 is one of the smallest versions of this module. It includes a built-in ceramic antenna. Features : WS2812 Led on board. 802.11 b/g/n Wi-Fi Direct (P2P), soft-AP Integrated TCP/IP protocol stack Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, DCXO and power management units +19.5dBm output power in 802.11b mode Power down leakage current of <10uA Integrated low power 32-bit CPU could be used as an application processor SDIO 1.1 / 2.0, SPI, UART STBC, 1×1 MIMO, 2×1 MIMO A-MPDU & A-MSDU aggregation & 0.4ms guard interval Wake up and transmit packets in < 2ms Standby power consumption of < 1.0mW (DTIM3) Access Point and Station Modes. Package Includes : 1 x ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
3V 6V 12V 24V 35V PWM DC Motor Speed Regulator
[Brushed DC motor Driver] 3V 6V 12V 24V 35V PWM DC Motor Speed Regulator is a Mini Style DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). Precautions: DC motor governor input is DC, can not directly connect to the AC (for example home 220V AC), otherwise, it will burn! DC power supply positive and negative terminals do not reverse, otherwise, the governor may be damaged. The motor can be positive or negative when the direction of operation and expectations do not match, you can adjust the line order to change the direction. Adjust the potentiometer knob to change the governor output duty cycle, the motor speed changes. Features: Mini DC 4.5-35V 5A PWM Motor Speed Controller. Wide voltage DC motor speed controller. Operating voltage: DC4.5V-35V Output current: 0-5A Output power: 90W (max) PWM duty cycle: 1% -100%. Package Includes: 1 x 3V 6V 12V 24V 35V PWM DC Motor Speed Regulator
LM317T Adjustable Voltage Regulator
[Voltage Regulator IC] It is an LM317T Adjustable Voltage Regulator. They are designed to supply more than 1.5 A of load current with an output voltage adjustable over a 1.2 to 37 V range. The nominal output voltage is selected by means of a resistive divider. This makes the device exceptionally easy to use and thereby eliminating the need for stocking of many fixed regulators. Package Includes: 1 x LM317T Adjustable Voltage Regulator.
Out of stockPro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
[Arduino Boards] This Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino development board has 4 channel 10 bit ADC, 5 PWM pins, 12 DIO, and a hardware serial connection Rx and Tx you are familiar with Running on 16MHz and 5V, this board will remind you a lot of other Arduino compatible boards that you like. There is a voltage regulator on board, so it can accept up to 12V DC. The Micro is a microcontroller board based on the ATmega32U4. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard. The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. If you supply an unstable power supply board, be sure to connect to the “RAW”, not on the VCC pin. It has also added a PTC fuse and diode protection to the power circuit and to correct the RX and LED TX circuits. Features : ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. Pin Diagram: Package Includes : 1 x Pro Micro 5V 16M Mini Leonardo Microcontroller Development Board For Arduino
AC 220V 2000W SCR Voltage Regulator Dimmers Speed Controller Thermostat
[AC Motor Driver] 2000W AC 220V SCR Thyristor Voltage Regulator – Motor Speed Controller & Dimmer The 2000W AC SCR Thyristor Voltage Regulator is a high-power electronic controller designed for adjusting AC voltage to control light brightness, motor speed, heating temperature, and other suitable AC loads. It uses a high-power bidirectional silicon-controlled device and an onboard potentiometer for convenient voltage adjustment. The controller can be connected in series with a compatible AC load and adjusted using the rotary knob. It is suitable for applications such as electric furnaces, water heaters, lamps, small motors, electric irons, and other compatible resistive or motor loads. ⭐ Key Features 2000W maximum advertised power AC voltage regulation 90–220V AC input Adjustable output voltage: 50–220V AC High-power SCR/thyristor design Onboard adjustable potentiometer Suitable for light brightness control Suitable for motor speed control Suitable for heating temperature control Compact design Potentiometer includes fixing nut No additional external control components required for basic operation 📋 Technical Specifications Product Type: AC SCR Voltage Regulator Controller Type: Thyristor / SCR Regulator Input Voltage: 90–220V AC Adjustable Output Voltage: 50–220V AC Maximum Power: 2000W SCR Rating: 25A Recommended Power for Voltage Adjustment: Up to approximately 1000W / 5A Recommended Current for Electrical Machines: Up to approximately 3A Control Method: Rotary Potentiometer Material: Plastic / Metal Dimensions: 48 × 55 × 27mm Weight: Approximately 41g Application: AC Voltage / Speed / Brightness / Temperature Control 🛠️ How to Use Connect the controller in series with the compatible AC load according to the input and output markings. After making sure all connections are secure, rotate the potentiometer to adjust the output and control the connected load. For resistive loads such as lamps or heaters, the controller can be used for brightness or heating control. For compatible small AC motors, it can be used for speed adjustment. 🔧 Applications AC Lamp Dimmer Light Brightness Control Small AC Motor Speed Control Electric Furnace Control Water Heater Control Electric Iron Control Heating Element Control Temperature Control AC Voltage Regulation DIY AC Control Projects 📦 Package Includes 1 × 2000W 220V SCR Thyristor AC Voltage Regulator / Motor Speed Controller ⚠️ Precautions This module works with potentially lethal AC mains voltage. Installation should only be performed by a qualified person familiar with AC electrical systems. Do not touch the board or terminals while powered. Do not exceed the specified voltage, current, or power ratings. The 2000W rating is a maximum advertised rating; actual safe continuous power depends on load type, cooling, enclosure, and operating conditions. For voltage adjustment applications, the supplied specification recommends approximately 1000W / 5A or below. For electrical machines, the supplied specification recommends 3A or below. Provide adequate ventilation and heat dissipation at higher loads. Use appropriate fusing and electrical protection. Ensure all wiring and connections are properly insulated and secured. This type of controller is not suitable for every AC load; verify load compatibility before use.
Out of stock12V Centre Shaft DC Geared Motor (Multi RPM)
[Gear Motor] Multiple RPM DC Gear Robotics Motor 12v DC Gear Motors – 12Volts are generally a simple DC motor with a gearbox attached to it. This can be used in all-terrain robots and variety of robotic applications. These motors have a 3 mm threaded drill hole in the middle of the shaft thus making it simple to connect it to the wheels or any other mechanical assembly. These 12V DC geared motors widely use for robotics applications. Very easy to use and available in standard size. Also, you don’t have to spend a lot of money to control motors with an Arduino or compatible board. The most popular L298N H-bridge module with onboard voltage regulator motor driver can be used with this motor that has a voltage of between 5 and 35V DC or you can choose the most precise motor diver module from the wide range available in our Motor divers category as per your specific requirements. Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel.DC Geared motors with robust metal gearbox for heavy-duty applications, available in the wide RPM range and ideally suited for robotics and industrial applications.Very easy to use and available in standard size. Nut and threads on the shaft to easily connect and internally threaded shaft for easily connecting it to the wheel. Specifications and Features:- RPM: Multi RPM. Operating Voltage: 12V DC Gearbox: Attached Plastic (spur)Gearbox Shaft diameter: 6mm with internal hole Torque: 1 kg-cm No-load current = 60 mA(Max) Load current = 300 mA(Max). Note: Colour and sticker on the product may vary in each lot. We ship randomly.