All products · 94 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
IOT Plug & Play
MCU: ESP8266/ESP32 based (Wi-Fi 2.4GHz). Supply: 5V input, onboard 3.3V regulation. Protocols: MQTT/HTTP. Cloud/App support. GPIO with pre-wired ports. Typical sensors: DHT11/22, LDR, relay module, IR, PIR.
Only 1 leftIOT Smarthome Kit
MCU: ESP8266/ESP32. Modules: 1–4 channel relay (optocoupled preferred), PIR, LDR, DHT. Control: app/web dashboard. Protocols: MQTT/HTTP. Power: 5V input. Properly isolated AC relay use.
Out of stockNylon Standoffs M3 Assortment (100 pc)
Nylon M3 male-female standoffs in 5-25mm lengths for PCB + prototype builds.
2S 4A Type-C Lithium Battery Charging Module – 8.4V Step-Up Boost Charger for 18650 Lipo
[Step UP Buck Converter] 2S 4A Type-C Lithium Battery Charging Module – 8.4V Step-Up Boost Charger for 18650 The 2S 4A Type-C Lithium Battery Charging Module is a compact step-up charging board designed for charging 2-cell series (2S) 18650 Li-ion/Li-Po battery packs. It accepts a 3–6V DC input through USB Type-C and boosts the voltage to 8.4V, the required full-charge voltage for a 2S lithium battery pack. The 4A specification refers to the maximum input current version. According to available product specifications, the corresponding charging current is approximately 2.2A, rather than 4A. ⭐ Key Features Designed for 2S lithium-ion/Li-Po battery packs Suitable for 2 × 18650 cells connected in series USB Type-C input 3–6V DC input Recommended input: 3.7V / 5V Step-up/boost charging circuit 8.4V charging voltage 4A maximum input-current version Approximately 2.2A charging current Automatic recharge function Battery charging protection features Compact PCB design LED charging/status indication Suitable for DIY battery and portable-power projects 📋 Technical Specifications Product Type: 2S Lithium Battery Step-Up Charging Module Battery Configuration: 2S – 2 cells in series Compatible Battery: 3.6V/3.7V Li-ion / Li-Po Nominal Battery Pack Voltage: 7.4V Full-Charge Voltage: 8.4V Input Voltage: DC 3–6V Recommended Input: DC 3.7V / 5V Maximum Input Current: 4A Charging Current: Approximately 2.2A Charging Interface: USB Type-C Charging Mode: Constant-current / constant-voltage Board Size: Approximately 39 × 18 × 6.3mm Operating Temperature: -40°C to +85°C LED Indicators: Charging / fully charged or constant-voltage status 🔋 Charging Performance For the 2S 4A version: USB Type-C 5V → Boost Charging Module → 8.4V → 2S Battery Pack The module draws up to approximately 4A from the input, while the specified charging current is approximately 2.2A. This distinction is important when selecting the USB power adapter. 🔧 Applications 2S 18650 battery packs 7.4V Li-ion battery packs 2S Li-Po battery packs DIY power banks Portable electronics Bluetooth speaker battery systems Robotics projects Solar charging applications Electronic prototyping Portable audio equipment Electric fan projects Type-C rechargeable equipment Custom battery charging systems 🛠️ How It Works The module uses a boost/step-up charging circuit to convert the lower USB Type-C input voltage into the 8.4V charging voltage required for a 2S lithium battery pack. Example: 5V Type-C Input → Step-Up Circuit → 8.4V Charging Output → 2S 18650 Battery A 2S battery pack consists of two lithium cells connected in series: 3.7V + 3.7V = 7.4V nominal4.2V + 4.2V = 8.4V fully charged 💡 LED Indicators The module uses status indicators to show the charging condition: CR: Charging OK: Fully charged / constant-voltage stage ⚠️ Important Notes This module is intended for 2S battery packs only. Do not connect a single 18650 cell directly to the 8.4V charging output. The two cells should be properly matched and in good condition. Do not exceed the 6V maximum input voltage. A suitable Type-C power source is required to supply the necessary input current. The 4A rating is the input-current rating, not the battery charging current. The specified charging current for this 2S 4A version is approximately 2.2A. This charging module should not automatically be considered a replacement for a dedicated 2S BMS/protection board. Use appropriate battery protection where required. Check the PCB polarity and connection markings before connecting the battery. Do not short-circuit the input or output. Use properly matched lithium cells for safe and reliable charging. Keep the module adequately ventilated during higher-current operation. 📦 Package Includes 1 × 2S 4A Type-C Step-Up Boost Lithium Battery Charging Module – 8.4V
Type-C PD/QC/AFC Fast Charge Decoy Trigger Module – 5V/9V/12V/15V/20V Fixed Output
[Step UP Buck Converter] Type-C PD/QC/AFC Fast Charge Decoy Trigger Module – 5V/9V/12V/15V/20V Fixed Output The Type-C PD/QC/AFC Fast Charge Decoy Trigger Module is a compact USB Type-C power negotiation module designed to request a selected voltage from compatible USB Type-C fast chargers and power banks. It supports QC 2.0/3.0, AFC, PD 2.0 and PD 3.0 protocols, allowing compatible USB-C power sources to provide higher voltage outputs such as 5V, 9V, 12V, 15V or 20V. This module is useful for DIY electronics projects where a USB Type-C PD/QC charger needs to be used as a DC power source for equipment that does not have native USB-C fast-charging support. ⭐ Key Features USB Type-C fast-charge decoy/trigger module Supports PD 2.0 / PD 3.0 Supports QC 2.0 / QC 3.0 Supports Samsung AFC Fixed selectable voltage output Supports 5V / 9V / 12V / 15V / 20V output options Negotiates the required voltage from a compatible charger Suitable for USB-C power banks and PD adapters LED indicators for operating/status indication Compact and lightweight PCB design Useful for DIY power supply and electronics projects Plug-and-play operation with compatible USB-C power sources 📋 Technical Specifications Product Type: USB Type-C Fast Charge Trigger / Decoy Module Input Connector: USB Type-C Input Source: USB-C PD/QC/AFC compatible charger or power bank Supported Protocols: PD2.0, PD3.0, QC2.0, QC3.0, AFC Output Voltage: 5V / 9V / 12V / 15V / 20V Output Type: DC Voltage Selection: Fixed/selectable depending on module version Indicator: LED status indicators Application: DC power conversion and fast-charge voltage triggering 🔧 Applications Converting USB-C PD chargers into DC power supplies Powering DIY electronics projects Arduino and microcontroller projects LED applications Portable electronic equipment DIY laboratory power supplies DC motors and other suitable loads Router/modem power applications where the required voltage matches Powering electronics from USB-C PD power banks Replacing conventional DC adapters with USB-C PD sources 🛠️ How It Works The module does not boost the USB voltage itself. Instead, it communicates with a compatible USB-C power source and sends the required PD/QC/AFC negotiation request. For example, when connected to a compatible PD charger, the module can request: 5V → 9V → 12V → 15V → 20V The charger then provides the negotiated voltage at the module's DC output. ⚠️ Important Notes The connected USB-C charger or power bank must support the required fast-charging protocol and voltage. A standard 5V-only USB charger cannot normally provide 9V/12V/15V/20V through this module. Always verify the selected output voltage with a multimeter before connecting your device. Do not connect a device that requires a lower voltage than the selected output. The module is a trigger/decoy board, not a standalone DC-DC boost converter. Maximum available output power/current depends on the connected USB-C charger/power bank and the module's specifications. Do not short the output terminals. 20V output can damage 5V/9V/12V-only electronics if the wrong voltage is selected. Exact selectable voltages and current capability can vary between board versions. 📦 Package Includes 1 × Type-C PD/QC/AFC Fast Charge Decoy Trigger Module
Black Plastic 3×18650 Battery Holder or Case Series Connection With Wire
[Lithium Battery Holder] Black Plastic 3×18650 Battery Holder – Series Connection The Black Plastic 3×18650 Battery Holder is designed to securely hold three 18650 lithium-ion battery cells in series configuration. It provides a convenient and organized way to mount 18650 cells for DIY battery packs, portable electronics, power supplies, LED projects, and other battery-powered applications. The holder is made from durable plastic and features mounting holes for secure installation using suitable screws. It is supplied with red and black connecting wires for convenient connection to an external circuit. ⭐ Key Features Designed for 3 × 18650 battery cells Series connection Black plastic construction Without cover Secure battery positioning Easy installation Built-in mounting holes Red and black connecting wires Suitable for DIY battery pack projects Compact and lightweight design 📋 Technical Specifications Product Type: 18650 Battery Holder Battery Capacity: 3 Cells Battery Type: 18650 Li-Ion Cell Configuration: 3S / Series Connection Nominal Output Voltage: Approximately 11.1V with 3.7V cells Fully Charged Voltage: Approximately 12.6V Material: Plastic Color: Black Cover: Without Cover Connection Wires: Red and Black Mounting: Screw Mount Mounting Holes: Yes Recommended Screw Size: Approximately 3mm Application: Battery Pack / Portable Electronics 🔌 Connection The three 18650 cells are connected in series, increasing the total voltage while maintaining the capacity of a single cell. With standard 3.7V nominal cells, the pack is approximately 11.1V nominal and 12.6V when fully charged. The red wire is the positive connection and the black wire is the negative connection. 🔧 Applications DIY 18650 Battery Packs 3S Lithium-Ion Battery Packs Portable Electronics LED Lighting Projects DIY UPS Projects Arduino Projects ESP8266 / ESP32 Projects Rechargeable Electronics Battery-Powered Devices Electronics Prototyping 📦 Package Includes 1 × 3×18650 Battery Holder / Case – Series Connection, Without Cover ⚠️ Precautions Use only compatible 18650 Li-Ion cells. Use three cells with matching capacity, chemistry, age, and charge condition. Use a suitable 3S BMS/protection and charging circuit. Do not mix damaged or mismatched cells. Check polarity carefully before installation. Do not short-circuit the battery terminals. Do not use damaged, swollen, or leaking cells. Ensure the holder and wiring are securely installed.
1K Ohm Rotary Potentiometer Round Shaft 3 Pin Elcon
[Potentiometer] 1KΩ Rotary Potentiometer Round Shaft Elcon The 1KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 1KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 10mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 1KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 10mm Body Diameter / Width: 16mm Total Height: Approx. 25mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 1KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 1KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch before installation.
5K Ohms Rotary Potentiometer Round Shaft 3 Pin Elcon
[Potentiometer] 5KΩ Rotary Potentiometer Round Shaft Elcon The 5KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 5KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 13mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 5KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 13mm Body Diameter / Width: 16mm Total Height: Approx. 28mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 5KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 5KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch
802580 LiPo Battery 700mAh 3.7V High Discharge 25c for Drone
[LiPo Cell] LiPo Battery 700mAh 3.7V High Discharge 802580 3.7V Lithium Polymer Battery • 700mAh Capacity • 25C High Discharge • 802580 Cell • Molex 2.0mm 2-Pin Connector The LiPo Battery 700mAh 3.7V High Discharge 802580 is a compact and lightweight Lithium Polymer (LiPo) rechargeable battery designed for applications that require high current output in a small form factor. Built with high-quality lithium polymer cells, this battery delivers a nominal voltage of 3.7V and a 700mAh capacity, making it ideal for RC toys, drones, mini helicopters, robotics, wireless electronics, and DIY projects. With a 25C continuous discharge rating, this battery can provide rapid bursts of current for motors and other high-power devices. The battery comes with a Molex 2.0mm 2-pin connector and an integrated protection PCB, offering added safety during charging and discharging. The 802580 cell size refers to the approximate dimensions of 8.0 × 25 × 80 mm, allowing the battery to fit easily into compact electronic devices while maintaining excellent power-to-weight performance. Note: This battery is intended for high-discharge applications such as RC models and robotics. It is not recommended for long-duration low-current devices such as cameras or data loggers. ⭐ Features High-quality 3.7V 700mAh LiPo battery 25C continuous discharge capability Compact 802580 cell size Lightweight design Stable voltage output Built-in protection circuit (PCB) Pre-installed Molex 2.0mm 2-pin connector Excellent power-to-weight ratio Rechargeable and reusable Suitable for high-current applications Easy plug-and-play installation 📋 Technical Specifications Product Type: Rechargeable Lithium Polymer (LiPo) Battery Battery Chemistry: Lithium Polymer (Li-ion Polymer) Cell Size: 802580 Nominal Voltage: 3.7V Full Charge Voltage: 4.20V Typical Capacity: 700mAh Discharge Rating: 25C Continuous Dimensions: Approx. 8.0 × 25 × 80 mm Weight: Approx. 18g Connector Type: Molex 2.0mm 2-Pin Protection Circuit: Built-in PCB Protection Rechargeable: Yes 🔧 Applications Suitable for: RC Cars RC Airplanes RC Helicopters Drones & Quadcopters Robotics Projects Arduino Projects ESP32 Projects DIY Electronics Portable Devices Wireless Modules Educational Projects Electronic Prototyping Battery Replacement Projects Miniature Electronics 📦 Package Includes 1 × LiPo Battery 700mAh 3.7V High Discharge 802580 with Molex 2.0mm 2-Pin Connector ⚠️ Safety Instructions Use only LiPo-compatible chargers. Do not charge above 4.20V. Do not discharge below the recommended cut-off voltage. Do not short-circuit the battery terminals. Do not puncture, crush, or expose the battery to fire. Store partially charged in a cool, dry place when not in use. Ensure connector polarity matches your device before connection.
702035 LiPo Battery 400mAh 3.7V High Discharge 25C For Drone
[LiPo Cell] LiPo Battery 400mAh 3.7V High Discharge 702035 3.7V Lithium Polymer Battery • 400mAh Capacity • 25C High Discharge • 702035 Cell • Molex 2.0mm 2-Pin Connector The LiPo Battery 400mAh 3.7V High Discharge 702035 is a compact and lightweight Lithium Polymer (LiPo) rechargeable battery designed for applications that require high current output in a small form factor. Built with high-quality lithium polymer cells, this battery delivers a nominal voltage of 3.7V and a 400mAh capacity, making it ideal for RC toys, drones, mini helicopters, robotics, wireless electronics, and DIY projects. With a 25C continuous discharge rating, this battery can provide rapid bursts of current for motors and other high-power devices. The battery comes with a Molex 2.0mm 2-pin connector and an integrated protection PCB, offering added safety during charging and discharging. The 702035 cell size refers to the approximate dimensions of 7.0 × 20 × 35 mm, allowing the battery to fit easily into compact electronic devices while maintaining excellent power-to-weight performance. Note: This battery is intended for high-discharge applications such as RC models and robotics. It is not recommended for long-duration low-current devices such as cameras or data loggers. ⭐ Features High-quality 3.7V 400mAh LiPo battery 25C continuous discharge capability Compact 702035 cell size Lightweight design Stable voltage output Built-in protection circuit (PCB) Pre-installed Molex 2.0mm 2-pin connector Excellent power-to-weight ratio Rechargeable and reusable Suitable for high-current applications Easy plug-and-play installation 📋 Technical Specifications Product Type: Rechargeable Lithium Polymer (LiPo) Battery Battery Chemistry: Lithium Polymer (Li-ion Polymer) Cell Size: 702035 Nominal Voltage: 3.7V Full Charge Voltage: 4.20V Typical Capacity: 400mAh Discharge Rating: 25C Continuous Dimensions: Approx. 7.0 × 20 × 35 mm Weight: Approx. 12g Connector Type: Molex 2.0mm 2-Pin Protection Circuit: Built-in PCB Protection Rechargeable: Yes 🔧 Applications Suitable for: RC Cars RC Airplanes RC Helicopters Drones & Quadcopters Robotics Projects Arduino Projects ESP32 Projects DIY Electronics Portable Devices Wireless Modules Educational Projects Electronic Prototyping Battery Replacement Projects Miniature Electronics 📦 Package Includes 1 × LiPo Battery 400mAh 3.7V High Discharge 702035 with Molex 2.0mm 2-Pin Connector
0.3–4mm Mini Drill Chuck with Key & 2.3mm Brass Shaft Adapter for 555 DC Motor
[General DC Motor] 🔧 0.3–4mm Mini Drill Chuck with Key & 2.3mm Brass Shaft Adapter for 555 DC Motor 0.3–4mm Chuck Capacity • JT0 Drill Chuck • 2.3mm Brass Shaft Adapter • Ideal for DIY Mini Drill Machines The 0.3–4mm Mini Drill Chuck with Key and 2.3mm Brass Shaft Adapter is a high-quality accessory designed for converting 555 DC motors into compact mini drilling machines. This complete set includes a precision JT0 drill chuck, a 2.3mm brass motor shaft adapter, and a chuck key for secure tightening and loosening of drill bits. Manufactured from high-carbon steel, the drill chuck provides excellent durability, wear resistance, and high clamping accuracy. It securely holds drill bits ranging from 0.3mm to 4.0mm, making it suitable for precision drilling in wood, plastic, acrylic, PCB boards, resin, aluminum, and other soft materials. The included 2.3mm brass shaft adapter offers a precise fit on 555 DC motor shafts, ensuring smooth power transmission with minimal vibration. Its corrosion-resistant brass construction provides excellent durability and reliable performance for long-term use. This mini drill chuck kit is widely used in DIY mini drill machines, PCB drilling, model making, hobby crafts, jewelry making, electronics repair, and educational projects. ⭐ Features Precision 0.3–4mm JT0 mini drill chuck Includes 2.3mm brass shaft adapter High-carbon steel chuck construction Brass motor shaft connector Secure key-operated chuck mechanism High clamping accuracy Strong impact and wear resistance Smooth and stable operation Easy installation on 555 DC motors Suitable for DIY mini drill machines Compatible with drill bits from 0.3mm to 4mm Compact and lightweight design 📋 Technical Specifications Product Type: Mini Drill Chuck Kit Chuck Capacity: 0.3mm – 4.0mm Chuck Type: JT0 Keyed Drill Chuck Chuck Material: High-Carbon Steel Adapter Material: Brass Motor Shaft Diameter: 2.3mm Connection Type: JT0 Taper Tightening Method: Chuck Key Compatible Motor: 555 DC Motor Application: Mini Electric Drill Conversion Color: Silver & Brass 🔧 Applications Suitable for: DIY Mini Drill Machines 555 DC Motor Projects PCB Drilling Electronics Repair Model Making Jewelry Making Woodworking Plastic Drilling Acrylic Drilling Resin Crafts Hobby Projects Educational Projects Small Precision Drilling Prototype Development 📦 Package Includes 1 × 0.3–4mm JT0 Mini Drill Chuck 1 × Chuck Key (Spanner) 1 × 2.3mm Brass Shaft Adapter ⚠️ Note Designed for 2.3mm diameter motor shafts. Recommended for 555 DC motors and compatible motors with a 2.3mm shaft. Suitable for drilling soft materials such as wood, plastic, acrylic, PCB, and aluminum. Not intended for heavy-duty industrial drilling or hammer drilling applications. Product appearance may vary slightly depending on the manufacturing batch.
5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal
[Power Connector] 🔌 5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal (Male / Female) Standard DC Barrel Connector • 2-Pin Screw Terminal • Solder-Free Installation • Up to 5A Current Rating The 5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal is a convenient and reliable connector designed for quick and secure DC power connections without soldering. Compatible with the industry-standard 5.5mm outer diameter and 2.1mm inner diameter barrel connector, it is widely used in CCTV camera installations, LED lighting, routers, power adapters, and DIY electronics projects. Available in Male and Female variants, this connector features a 2-pin screw terminal that allows wires to be connected easily using a screwdriver. The clearly marked positive (+) and negative (–) terminals help prevent wiring errors, making installation simple for both professionals and hobbyists. Manufactured with a durable ABS plastic housing and nickel-plated metal contacts, this connector provides reliable electrical performance, corrosion resistance, and long service life. Its reusable design makes it ideal for prototyping, repairs, and permanent installations. ⭐ Features Standard 5.5 × 2.1mm DC barrel connector Available in Male and Female versions 2-pin screw terminal for quick wire connection No soldering required Clearly marked positive (+) and negative (–) terminals Supports up to 5A current Durable ABS plastic housing Nickel-plated contacts for improved conductivity Secure and reusable connection Easy plug-and-play installation Suitable for 12V and 24V DC systems Ideal for DIY electronics and repair work 📋 Technical Specifications Product Type: DC Power Jack Plug with Screw Terminal Connector Type: Male / Female Barrel Size: 5.5mm (Outer) × 2.1mm (Inner) Terminal Type: 2-Pin Screw Terminal Rated Voltage: 0–30V DC Recommended Operating Voltage: 12V / 24V DC Maximum Current: Up to 5A Housing Material: ABS Plastic Contact Material: Nickel-Plated Metal Mounting Type: Inline Cable Mount Wire Compatibility: Up to 22 AWG Polarity Marking: Positive (+) / Negative (–) Operating Temperature: -20°C to +80°C 🔧 Applications Suitable for: CCTV Camera Power Connections LED Strip Lighting LED Sign Boards DC Power Adapters Routers and Modems Arduino Projects Raspberry Pi Projects DIY Electronics Battery Packs Power Distribution Systems Industrial Control Equipment Testing and Prototyping Electronic Repairs Low-Voltage DC Power Systems 📦 Package Includes 1 × 5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal (Male or Female variant as selected) ⚠️ Note Please select the required Male or Female connector variant before ordering. Verify polarity before connecting power to avoid damage to connected devices. Suitable for low-voltage DC applications only. Product appearance may vary slightly depending on the manufacturing batch.
ESP32-C3 Super Mini Development Board With Headers Pins
[ESP Modules] Ultra Compact • Wi-Fi & BLE 5.0 • USB Type-C • Perfect for IoT & Embedded Projects The ESP32-C3 Super Mini Development Board is a compact, feature-rich development board built around the powerful ESP32-C3 SoC from Espressif. Powered by a 32-bit RISC-V single-core processor running at up to 160MHz, it combines 2.4GHz Wi-Fi, Bluetooth 5.0 Low Energy (BLE), and low-power operation in an ultra-small form factor. Designed for IoT, smart home, wireless communication, automation, and embedded system development, the ESP32-C3 Super Mini offers 4MB Flash memory, 400KB SRAM, multiple GPIOs, ADC, PWM, UART, SPI, and I2C interfaces for connecting sensors, displays, relays, and other peripherals. The onboard USB Type-C interface simplifies programming and power supply, while the built-in USB-to-Serial functionality enables quick firmware uploading without requiring additional programmers. Fully compatible with Arduino IDE, ESP-IDF, PlatformIO, and MicroPython, it is suitable for beginners, students, makers, and professional developers. Its ultra-compact breadboard-friendly design makes it ideal for portable and space-constrained projects where performance, wireless connectivity, and energy efficiency are essential. Note: Programming, software configuration, driver installation, firmware flashing, and coding-related issues are not covered under return or replacement. Users are expected to troubleshoot software-related issues independently. ⭐ Features Powerful ESP32-C3 32-bit RISC-V processor CPU frequency up to 160MHz Built-in 2.4GHz Wi-Fi (802.11 b/g/n) Integrated Bluetooth 5.0 Low Energy (BLE) Ultra-compact Super Mini design Breadboard-friendly layout USB Type-C interface for programming and power 4MB onboard Flash memory 400KB SRAM Multiple GPIO, ADC, PWM, UART, SPI & I2C interfaces Low power consumption with Deep Sleep mode Onboard programmable LED Compatible with Arduino IDE, ESP-IDF, PlatformIO & MicroPython Ideal for IoT, automation, robotics, and wireless applications 📋 Technical Specifications Product Type: Development Board Board Model: ESP32-C3 Super Mini Microcontroller: ESP32-C3 Processor Architecture: 32-bit RISC-V CPU Frequency: Up to 160MHz Core: Single Core Flash Memory: 4MB SRAM: 400KB Wi-Fi Standard: IEEE 802.11 b/g/n (2.4GHz) Bluetooth: Bluetooth 5.0 Low Energy (BLE) Operating Voltage: 3.3V Input Voltage: 5V via USB Type-C or 3.3V External USB Interface: USB Type-C GPIO: Multiple Digital GPIO Pins Analog Input: Up to 6 ADC Channels PWM: Supported UART: Supported SPI: Supported I2C: Supported USB-to-Serial: Onboard Onboard LED: User Programmable (GPIO8) Power Consumption: Ultra Low (Deep Sleep ≈ 43µA) Dimensions: Approx. 22.5 × 18 mm Headers: Pre-Soldered 🔧 Applications Suitable for: Internet of Things (IoT) Smart Home Automation Wireless Sensor Networks Home Automation Systems Bluetooth Low Energy Devices Wi-Fi Enabled Controllers Robotics Projects Data Logging Systems Remote Monitoring Industrial Automation Portable Embedded Devices Educational Learning DIY Electronics Projects Wearable Electronics Rapid Prototyping 📦 Package Includes 1 × ESP32-C3 Super Mini Development Board Pin Headers ⚠️ Note Programming, firmware installation, software configuration, and driver-related issues are not covered under warranty, return, or replacement. Please verify board compatibility and install the appropriate development environment before programming. Soldered and non-soldered header pin depend on stock
10-in-1 USB & Type-C Digital Tester – IPS Voltmeter, Ammeter, Impedance & Capacity Meter
[Ammeter and Voltmeter] The 10-in-1 USB & Type-C Digital Power Tester is a multifunction USB measurement instrument developed for engineers, technicians, hobbyists, and electronics enthusiasts. It accurately monitors USB charging performance while providing comprehensive electrical measurements for USB-A and USB Type-C devices. Equipped with a bright IPS true-color LCD display, the tester simultaneously displays ten important charging parameters including Voltage, Current, Power, Capacity (mAh), Energy (mWh), Cable Resistance, Temperature, Charging Time, D+ Voltage, and D− Voltage. The tester features both USB-A and USB Type-C input/output interfaces, allowing compatibility with traditional USB chargers as well as modern USB-C Power Delivery devices. It supports testing of fast chargers, mobile phones, tablets, laptops, power banks, USB cables, and various USB-powered electronics. With support for measurements up to 150W and 5A, this tester is suitable for high-power USB-C PD chargers while consuming less than 20mA of operating current. Built-in control buttons allow users to switch display modes, perform fast-charge diagnostics, and manage measurement functions easily. Its compact design makes it an excellent tool for electronics repair, charger verification, cable testing, battery capacity measurement, laboratory work, and DIY electronics projects. 🔹 Key Features Dual Interface: USB-A & USB Type-C Input/Output Supports USB PD and Fast Charging IPS Full Color LCD Display Measures Voltage, Current and Power Capacity (mAh) & Energy (mWh) Measurement Cable Resistance (Impedance) Measurement Internal Temperature Monitoring USB D+ / D− Voltage Detection Charging Timer Function High Accuracy Measurement Low Self Power Consumption Compact Portable Design Easy Operation with Dedicated Function Buttons 🔹 Technical Specifications Product Type: USB Digital Power Tester Display: IPS True Color LCD Input Interface: USB-A / USB Type-C Output Interface: USB-A / USB Type-C Maximum Power Measurement: 150W Maximum Current: 5A Voltage Measurement: USB Standard & USB-C PD Power Measurement Range: 0–150W Current Measurement: Up to 5A Capacity Measurement: mAh Energy Measurement: mWh Impedance Measurement Range: 1–999.9Ω Temperature Measurement: 0°C to 80°C USB D+ Voltage Range: 0–2.99V USB D− Voltage Range: 0–2.99V Timer Range: 999 Hours 59 Minutes Refresh Rate: Approximately 500ms Self Power Consumption: <20mA Operating Buttons: Mode / Power Dimensions: 76.9 × 38 × 11 mm 🔹 Applications This USB tester is suitable for: USB charger testing USB-C PD charger testing Power bank capacity testing Mobile charger verification Fast charging protocol diagnostics USB cable resistance testing Laptop USB-C charger testing Electronics repair DIY electronics projects Laboratory measurements Battery charging analysis Quality inspection of USB power supplies 🔹 Package Includes 1 × 10-in-1 USB & Type-C Digital Power Tester 🔹 Frequently Asked Questions (FAQ) What does "10-in-1" mean? It measures ten important parameters: Voltage, Current, Power, Capacity, Energy, Impedance, Temperature, Charging Time, D+ Voltage, and D− Voltage. Does it support both USB-A and USB Type-C? Yes. It features both USB-A and USB Type-C input and output interfaces. What is the maximum power it can measure? Up to 150W. What is the maximum current supported? Up to 5A. Can it test USB-C laptop chargers? Yes. It supports high-power USB-C PD chargers up to 150W. Can it measure charging cable quality? Yes. It measures cable impedance from 1Ω to 999.9Ω. Does it display temperature? Yes. It includes an internal temperature sensor with a range of 0°C to 80°C. Does it require batteries? No. It is powered directly from the connected USB source. Can it measure power bank capacity? Yes. It records charging capacity in mAh and mWh. Does it support fast charging protocols? Yes. It can monitor USB D+ and D− voltages, helping identify fast charging protocol handshakes.
Type-C USB 5V 2A Step-Up Boost Converter with USB Charger
[Li-ion Rechargeable Battery Charger, Step UP Buck Converter] Build your own portable power solutions with the Type-C USB 5V 2A Step-Up Boost Converter Power Bank Module — a compact and efficient charging solution designed for DIY power banks and USB-powered devices. This versatile module supports battery charging and 5V boost output, allowing you to convert battery voltage into a stable 5V USB output for powering smartphones, microcontrollers, and other USB devices. Equipped with a Type-C input, high-efficiency boost circuit, and intelligent power management, this module ensures reliable performance, fast charging, and safe operation. It also supports simultaneous charging and discharging, making it perfect for uninterrupted power supply applications. Key Features 🔋 2-in-1 Charging + Boost ModuleCharge your lithium battery while simultaneously providing a stable 5V output. ⚡ Stable 5V 2A OutputDelivers consistent power for USB devices like smartphones, Arduino, ESP32, and more. 🔌 Type-C USB InputModern and widely compatible input for easy charging (5V–5.5V). 🔄 High Efficiency Boost Conversion (Up to 92.5%)Minimizes power loss and improves battery life. 🧠 Smart Power ManagementAutomatically controls charging cycles, output switching, and battery protection. 🔘 External Button Control Support Short press: Turn ON output & display Double press: Turn OFF output 🔧 DIY Friendly DesignIncludes USB-A solder pads for custom builds and integrations. Working Functions 🔹 Auto shutdown when load current < 50mA🔹 Auto stop charging when current drops to 100mA🔹 Auto recharge when battery voltage < 4.1V🔹 Pre-charge mode below 2.8V (180mA safe charging)🔹 Supports charging while discharging Specifications Specification Description Input Voltage 5V – 5.5V (Type-C USB) Charging Cut-off Voltage 4.2V / 4.35V ±0.5% Charging Current 2.4A ±5% Boost Output Voltage 5V – 5.15V Output Current Up to 2A Efficiency Up to 92.5% Output Ripple 100mV Quiescent Current 30µA Material Metal + Plastic Applications 🔋 DIY Power Banks📱 Mobile Charging Projects🔧 Arduino / ESP32 Power Supply🔌 USB Device Power Modules🚗 Portable Electronics🧪 Embedded Systems & Prototyping Package Includes 1 × Type-C USB 5V 2A Step-Up Boost Converter Power Bank Module
Battery Voltage Wire 7/36 Black & Red 1 Meter – Flexible Copper Hook-Up Wire (Pair)
[Hook up wire] The Battery Voltage Wire 7/36 Black & Red is a high-quality flexible hook-up wire specially designed for battery connections, low-voltage power lines, and electronic circuits. Made with 7 strands of 36-gauge copper, this wire provides excellent conductivity, durability, and flexibility for easy routing in compact spaces. The wire comes in red and black insulation, making it perfect for identifying positive and negative terminals in battery packs, power supplies, inverters, chargers, and DIY electronics projects. With strong PVC insulation and fine stranded copper core, this wire is suitable for low-current DC applications, hobby electronics, Arduino projects, robotics, and general internal wiring. 🔹 Key Features High-quality 7/36 stranded copper conductor Red & Black color for easy polarity identification Highly flexible and easy to bend and route Low resistance for stable voltage transmission Durable PVC insulation for long life Ideal for low-voltage and low-current applications Suitable for DIY electronics, battery packs, and repair work 🔹 Technical Specifications Wire Type: Hook-up / Battery Voltage Wire Conductor Size: 7 / 36 (7 strands of 36 AWG) Material: Pure copper stranded core Insulation: PVC Color: Red & Black Rated Voltage: Up to 300V (typical) Current Rating: Low current applications Flexibility: High Application Type: DC wiring, battery leads, signal & power lines 🔹 Applications Battery pack connections Arduino and microcontroller projects Power supply wiring Robotics and automation Inverter and charger wiring (low current) DIY electronics and prototyping Repair and internal equipment wiring 🔹 Package Contents 1 × Red 7/36 Battery Wire 1 × Black 7/36 Battery Wire
ESP32 Development Board with WiFi & Bluetooth – CH340C USB Type-C
[ESP Modules] The ESP32 Development Board with WiFi & Bluetooth (CH340C, Type-C) is a powerful and versatile microcontroller board designed for modern wireless and IoT applications. It features a dual-core processor and integrated 2.4GHz WiFi and Bluetooth (Classic + BLE) connectivity. This board includes an onboard CH340C USB-to-Serial converter, which allows easy programming and communication without requiring an external crystal oscillator. The USB Type-C port provides a stable and reversible connection for power and data. With a wide range of GPIO pins and peripherals such as ADC, DAC, PWM, UART, SPI, and I2C, this board is perfect for building home automation systems, smart devices, IoT nodes, robotics controllers, sensor networks, web servers, and wireless projects. It is fully compatible with Arduino IDE, ESP-IDF, and MicroPython, making it suitable for beginners, students, and professional developers. 🔹 Key Features Based on ESP32 dual-core microcontroller Built-in WiFi 802.11 b/g/n and Bluetooth v4.2 (Classic + BLE) Onboard CH340C USB-to-Serial converter (no external crystal required) Modern USB Type-C connector for power and programming Dual-core CPU up to 240 MHz for high-performance applications Multiple GPIO pins with ADC, DAC, PWM support Supports Arduino IDE, ESP-IDF, and MicroPython Low-power modes including deep sleep for battery-powered projects Compact design with breadboard-friendly layout Ideal for IoT, automation, robotics, smart home, and DIY electronics 🔹 Technical Specifications Microcontroller: ESP32 CPU: Dual-core Tensilica LX6, up to 240 MHz Flash Memory: 4 MB (typical, may vary by batch) SRAM: 520 KB Wireless Connectivity: WiFi: 2.4 GHz, 802.11 b/g/n Bluetooth: v4.2, Classic + BLE USB Interface: USB Type-C USB-to-Serial Chip: CH340C Operating Voltage: 3.3 V Input Voltage: 5 V via USB Logic Level: 3.3 V GPIO Pins: 30+ multifunction pins Peripherals: ADC, DAC, PWM, UART, SPI, I2C, I2S Clock Frequency: Up to 240 MHz Programming Support: Arduino IDE, ESP-IDF, MicroPython Onboard Components: Reset & Boot buttons, voltage regulator, status LEDs Form Factor: Standard ESP32 Dev Board size 🔹 Applications Internet of Things (IoT) projects Home and industrial automation Smart home devices Robotics and motor control Wireless sensor networks Web servers and cloud-connected devices Educational and training projects DIY electronics and prototyping 🔹 Package Contents 1 × ESP32 Development Board with WiFi & Bluetooth (CH340C, USB Type-C)
QC3.0 PD 2.0 Power Bank Dual Type-C Port Two-way Fast Charging Mobile Power Bank Module
[Lithium Battery Protection Board] 📝 Description Upgrade your portable power solutions with this advanced QC3.0 PD 2.0/3.0 Fast Charging Power Bank Module, engineered for high-performance mobile power systems and professional DIY applications. The motherboard features 5 default USB interfaces — Type-C, Lightning, Micro-USB, Type-A1, and Type-A2, along with a dedicated DC input port (charge-only, no discharge) supporting 5V–12V input. This multi-interface design ensures maximum compatibility with smartphones, tablets, laptops, and other USB-powered devices. 🔌 Port & Charging Capabilities Type-C Port supports bi-directional fast charging, allowing both input and output operation. Input protocols: AFC / FCP / SCP / VOOC / PD2.0 / PD3.0 Output protocols: PPS / PD2.0 / PD3.0 / AFC / FCP / QC2.0 / QC3.0 / QC3+ / SCP Lightning Port supports PD2.0 fast-charging input Micro-USB Port supports AFC / FCP / SCP fast-charging input Type-A1 & Type-A2 Ports support Apple / AFC / FCP / VOOC / QC2.0 / QC3.0 / QC3+ / SCP fast-charging output DC Port supports 5–12V input only (charging function, no output) ⚡ Fast-Charging Performance Input Voltage Support: 5V / 9V / 12V / 15V / 20V PPS Output: 3.3V–21V / 3A PD2.0 / PD3.0 Output: 5V ⎓ 3A 9V ⎓ 3A 12V ⎓ 3A 15V ⎓ 3A 20V ⎓ 5A QC2.0 Output: 5V ⎓ 3A / 9V ⎓ 3A / 12V ⎓ 3A QC3.0 Output: 5V–12V (200mV step adjustment) AFC Output: 5V ⎓ 3A / 9V ⎓ 2A / 12V ⎓ 2A FCP Output: 5V ⎓ 3A / 9V ⎓ 2A / 12V ⎓ 1.5A SCP Output: 5V ⎓ 4.5A / 10V ⎓ 2.2A VOOC Output: 5V ⎓ 4A 🔋 Battery & Power Options Powered by 18650 or Li-polymer battery packs, the module is available in three high-power variants: 3S – 65W (GXJA0707-001) 4S – 100W (GXJA0707-002) 5S – 100W (GXJA0707-003) The built-in digital display provides real-time monitoring of voltage, current, and power status, enabling precise control and safe operation. Compact, efficient, and feature-rich, this power bank module is ideal for DIY high-capacity power banks, portable charging stations, laptop backup batteries, and custom lithium battery systems up to 25,000mAh. ⭐ Key Features ✔ Multi-Port Design: Type-C, Lightning, Micro-USB, 2× USB-A, DC input✔ Bi-Directional Type-C Fast Charging (Input & Output)✔ Supports PPS, PD2.0/3.0, QC2.0/3.0, QC3+, AFC, FCP, VOOC, SCP✔ High Power Output: 65W (3S) / 100W (4S & 5S)✔ Digital Display for Real-Time Monitoring✔ Compatible with 18650 & Li-polymer Battery Packs✔ Compact & Portable PCB Design✔ Ideal for DIY Power Banks & Professional Builds 📦 Package Includes 1 × QC3.0 PD 2.0/3.0 Power Bank Fast Charging Module(Select Variant: 3S 65W / 4S 100W / 5S 100W) 1 × Integrated Digital Display (On-Board)
PD65W Fast Charging Adapter Power Banks Module USB-C PD 65W
[Li-ion Rechargeable Battery Charger, Step UP Buck Converter] 📝 Description Upgrade your power projects with this PD65W Fast Charging Adapter Module, engineered to deliver USB-C Power Delivery up to 65W.This module provides stable, intelligent, and ultra-fast charging for smartphones, laptops, tablets, and Type-C gadgets. Featuring a PD standard protocol board, it supports multiple voltage profiles such as 5V, 9V, 12V, 15V, and 20V, making it ideal for DIY fast chargers, custom power banks, repair work, or integrating PD into your electronic builds. Built with premium components, over-voltage, over-current, temperature protection, and high-efficiency power conversion, this module delivers reliable, safe performance for all your USB-C PD applications. Perfect for makers, technicians, hobbyists, and product developers. ⭐ Key Features ✔ 65W USB-C Power Delivery — Supports ultra-fast charging for smartphones, tablets, laptops, and Type-C devices ✔ Multi-Voltage PD Profiles — Automatically negotiates 5V / 9V / 12V / 15V / 20V depending on connected device ✔ High-Efficiency Power Conversion — Stable output with low heat generation and fast response ✔ Built-In Safety Protections — Over-voltage, over-current, short-circuit and thermal protection ensure reliable operation ✔ Compact Size for Easy Integration — Fits perfectly in DIY chargers, power banks, docking stations, and custom electronics ✔ Plug-and-Play Operation — Simple wiring and automatic PD negotiation ✔ Ideal for Makers & Technicians — Great for DIY projects, repairs, and upgrading existing charging systems 🔧 Technical Specifications Input Voltage: Operates from 8V to 32V, compatible with various power sources. Output Power: Up to 65W (via USB-C) Supported PD Voltages: 5V/9V/12V/15V/20V Protocol: USB Power Delivery (PD) Efficiency: High (depends on input/output profile) Protection Features: Over-voltage protection/Over-current protection/Short-circuit protection/Thermal protection Application: DIY chargers, fast-charging adapters, power banks, docking stations, electronics projects 📦 Package Includes 1 × PD65W Fast Charging Adapter Module Standard Board
Type-C USB Mini Humidifier DIY Kit 4 in 1 | 4-Fogger Mist Maker Module | Ultrasonic Atomizer Film Sheet with Driver Board
[Ultrasonic Sensor] The Type-C USB Mini Humidifier DIY Atomizer Kit is a compact ultrasonic mist generation module designed for building or repairing USB-powered humidifiers, aroma diffusers, and fogging systems. Powered directly from a 5V USB Type-C source, the kit features a high-performance driver board and four ultrasonic ceramic atomizer discs that generate a dense, cool mist with low power consumption. Using advanced 108KHz ultrasonic atomization technology, the module converts water into ultra-fine mist particles without producing heat or mechanical noise. The stable driver circuit ensures reliable oscillation, efficient mist production, and long service life, making it an excellent choice for DIY enthusiasts, students, makers, repair technicians, and electronics hobbyists. Simply connect the module to a 5V USB Type-C power source, place the atomizer discs in water, and enjoy instant cool mist generation. It is compatible with custom humidifier enclosures, bottles, containers, 3D-printed projects, hydroponic systems, and decorative fog applications. ⭐ Features USB Type-C powered (5V DC) Four ultrasonic ceramic atomizer discs High-density cool mist output Advanced ultrasonic atomization technology Stable driver circuit for reliable operation Low power consumption Silent operation with no moving parts Compact and lightweight design Easy plug-and-play installation Ideal for DIY humidifiers and aroma diffusers 📋 Technical Specifications Product Type: USB Ultrasonic Humidifier Driver Kit Power Input: USB Type-C Female Operating Voltage: DC 4.5V–5V Input Voltage: 5V USB Operating Current: 300mA (Typical) Power Consumption: 2.5W–3W Rated Power: 2W Operating Frequency: 108KHz ±2KHz Atomizer Quantity: 4 Ceramic Atomizer Discs Atomization Technology: Ultrasonic Mist Output: High Density Fine Mist Driver Board: Ultrasonic Oscillation Control Module Cooling Method: Natural Cooling Power Connector: USB Type-C Female Socket Material: Ceramic Atomizer Discs + PCB Driver Board 🔧 Applications Suitable for: DIY USB Humidifiers Aroma Diffusers Replacement Humidifier Modules Decorative Fog Makers Hydroponic Systems Smart Garden Projects Terrariums & Vivariums Indoor Plant Humidification Science & Educational Projects Prototype Development DIY Electronics Projects 📦 Package Includes 1 × Ultrasonic Driver Circuit Board 4 × Ceramic Ultrasonic Atomizer Discs ⚠️ Note Use only clean water for optimal performance and longer atomizer life. Do not operate the module without water. Product images are for illustrative purposes only. The actual product may vary slightly depending on the manufacturing batch.
18650 Lithium Battery Insulation For Nigative Pad 25 Pcs in one Sheet
[Insulation Paper] 18650 Lithium Battery Insulation For Nigative Pad This Single Hole Electrical Insulating Adhesive Mat for Battery Cell terminal Insulation is a cardboard paper for an 18650 battery insulator. Better protection to avoid short circuits on batteries.Easy peel-and-stick application. The Outer Ring Diameter is 17mm. The Thickness: is 0.25mm Battery Insulators Adhesive Paper Rings. Tags, 18650 Battery Insulator Ring Negative, 18650 Lithium Battery Insulation Ring For Negative Pad, Single Hole Electrical Insulating Adhesive Mat for Battery Cell Terminal Insulation. Tags, 18650, 18650 Battery Cover, Electrical Insulating Adhesive Mat, Lithium Battery Insulation Pad, 18650 Insulation Pad, 18650 21700 26650 32650 Adhesive corrugated paper, Battery Electrical Insulator Insulation Ring Adhesive For Negative Terminal. To buy an 18650 Lithium Battery: Click Here How to use.? Take off each insulation paper from the base paper. Put and stick upper hollow adhesive insulation paper on the top of the battery Negative. Put and stick lower solid adhesive insulation paper on the negative. Then, you can weld Ni tape or Ni-plated steel plate with positive, and negative to make the battery pack. Features: Easy to Install Heat-Resistant Design Compact and Lightweight Positive and Negative Terminal Insulation Features/Specs: Material: Barley Paper Compatibility: 18650/18500 Lithium Battery Ring Pad Use For Negative Terminal Outer Ring Diameter: 17 mm Thickness: 0.25 mm Applications: Electronic devices powered by 18650 battery cells Flashlights and portable lighting solutions DIY battery packs and configurations Power banks and battery-operated gadgets Custom battery projects and prototypes Package Includes: 1 x 18650 Lithium Battery Insulation Ring For Negative Pad Note: Product Images are shown for illustrative purposes only and may differ from the actual product