All products · 90 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Only 2 leftRobotic Arm Kit
DOF: 3–6 (kit dependent). Actuators: servo motors (SG90/MG90/MG996R class). Control: Arduino/servo driver (PCA9685 common). Supply: 5–6V for servos (separate recommended). Payload: light (50–200g typical for small kits).
Only 1 leftDrone Kit
Frame: 180–250mm class. Motors: brushless 2204/2205/2300KV. ESC: 20A–30A. Flight controller: F4/F7 (or basic for edu kits). Battery: LiPo 3S/4S. Props: 5-inch typical. Radio: 2.4GHz. Prop guards recommended.
Only 2 leftRC Car Kit
Chassis: 2WD/4WD. Motors: TT DC geared motors (3–6V) or higher. Driver: L298N/L293D. Controller: Arduino/ESP32 optional. Remote: IR/2.4GHz/Bluetooth. Power: 2×18650 or 4×AA. Optional ultrasonic/line sensor.
DC Plastic Gear Motor with Wheel (BO)
BO Motor with Wheel (Side Shaft BO Motor).
Stepper Motor 28BYJ-48 + ULN2003 Driver
28BYJ-48 ULN2003 5V stepper motor + ULN2003 driver board.
L298P Motor Driver Shield
L298P motor driver shield or relative driver shield.
Type-C PD/QC/AFC Fast Charge Decoy Trigger Module – 5V/9V/12V/15V/20V Fixed Output
[Step UP Buck Converter] Type-C PD/QC/AFC Fast Charge Decoy Trigger Module – 5V/9V/12V/15V/20V Fixed Output The Type-C PD/QC/AFC Fast Charge Decoy Trigger Module is a compact USB Type-C power negotiation module designed to request a selected voltage from compatible USB Type-C fast chargers and power banks. It supports QC 2.0/3.0, AFC, PD 2.0 and PD 3.0 protocols, allowing compatible USB-C power sources to provide higher voltage outputs such as 5V, 9V, 12V, 15V or 20V. This module is useful for DIY electronics projects where a USB Type-C PD/QC charger needs to be used as a DC power source for equipment that does not have native USB-C fast-charging support. ⭐ Key Features USB Type-C fast-charge decoy/trigger module Supports PD 2.0 / PD 3.0 Supports QC 2.0 / QC 3.0 Supports Samsung AFC Fixed selectable voltage output Supports 5V / 9V / 12V / 15V / 20V output options Negotiates the required voltage from a compatible charger Suitable for USB-C power banks and PD adapters LED indicators for operating/status indication Compact and lightweight PCB design Useful for DIY power supply and electronics projects Plug-and-play operation with compatible USB-C power sources 📋 Technical Specifications Product Type: USB Type-C Fast Charge Trigger / Decoy Module Input Connector: USB Type-C Input Source: USB-C PD/QC/AFC compatible charger or power bank Supported Protocols: PD2.0, PD3.0, QC2.0, QC3.0, AFC Output Voltage: 5V / 9V / 12V / 15V / 20V Output Type: DC Voltage Selection: Fixed/selectable depending on module version Indicator: LED status indicators Application: DC power conversion and fast-charge voltage triggering 🔧 Applications Converting USB-C PD chargers into DC power supplies Powering DIY electronics projects Arduino and microcontroller projects LED applications Portable electronic equipment DIY laboratory power supplies DC motors and other suitable loads Router/modem power applications where the required voltage matches Powering electronics from USB-C PD power banks Replacing conventional DC adapters with USB-C PD sources 🛠️ How It Works The module does not boost the USB voltage itself. Instead, it communicates with a compatible USB-C power source and sends the required PD/QC/AFC negotiation request. For example, when connected to a compatible PD charger, the module can request: 5V → 9V → 12V → 15V → 20V The charger then provides the negotiated voltage at the module's DC output. ⚠️ Important Notes The connected USB-C charger or power bank must support the required fast-charging protocol and voltage. A standard 5V-only USB charger cannot normally provide 9V/12V/15V/20V through this module. Always verify the selected output voltage with a multimeter before connecting your device. Do not connect a device that requires a lower voltage than the selected output. The module is a trigger/decoy board, not a standalone DC-DC boost converter. Maximum available output power/current depends on the connected USB-C charger/power bank and the module's specifications. Do not short the output terminals. 20V output can damage 5V/9V/12V-only electronics if the wrong voltage is selected. Exact selectable voltages and current capability can vary between board versions. 📦 Package Includes 1 × Type-C PD/QC/AFC Fast Charge Decoy Trigger Module
802580 LiPo Battery 700mAh 3.7V High Discharge 25c for Drone
[LiPo Cell] LiPo Battery 700mAh 3.7V High Discharge 802580 3.7V Lithium Polymer Battery • 700mAh Capacity • 25C High Discharge • 802580 Cell • Molex 2.0mm 2-Pin Connector The LiPo Battery 700mAh 3.7V High Discharge 802580 is a compact and lightweight Lithium Polymer (LiPo) rechargeable battery designed for applications that require high current output in a small form factor. Built with high-quality lithium polymer cells, this battery delivers a nominal voltage of 3.7V and a 700mAh capacity, making it ideal for RC toys, drones, mini helicopters, robotics, wireless electronics, and DIY projects. With a 25C continuous discharge rating, this battery can provide rapid bursts of current for motors and other high-power devices. The battery comes with a Molex 2.0mm 2-pin connector and an integrated protection PCB, offering added safety during charging and discharging. The 802580 cell size refers to the approximate dimensions of 8.0 × 25 × 80 mm, allowing the battery to fit easily into compact electronic devices while maintaining excellent power-to-weight performance. Note: This battery is intended for high-discharge applications such as RC models and robotics. It is not recommended for long-duration low-current devices such as cameras or data loggers. ⭐ Features High-quality 3.7V 700mAh LiPo battery 25C continuous discharge capability Compact 802580 cell size Lightweight design Stable voltage output Built-in protection circuit (PCB) Pre-installed Molex 2.0mm 2-pin connector Excellent power-to-weight ratio Rechargeable and reusable Suitable for high-current applications Easy plug-and-play installation 📋 Technical Specifications Product Type: Rechargeable Lithium Polymer (LiPo) Battery Battery Chemistry: Lithium Polymer (Li-ion Polymer) Cell Size: 802580 Nominal Voltage: 3.7V Full Charge Voltage: 4.20V Typical Capacity: 700mAh Discharge Rating: 25C Continuous Dimensions: Approx. 8.0 × 25 × 80 mm Weight: Approx. 18g Connector Type: Molex 2.0mm 2-Pin Protection Circuit: Built-in PCB Protection Rechargeable: Yes 🔧 Applications Suitable for: RC Cars RC Airplanes RC Helicopters Drones & Quadcopters Robotics Projects Arduino Projects ESP32 Projects DIY Electronics Portable Devices Wireless Modules Educational Projects Electronic Prototyping Battery Replacement Projects Miniature Electronics 📦 Package Includes 1 × LiPo Battery 700mAh 3.7V High Discharge 802580 with Molex 2.0mm 2-Pin Connector ⚠️ Safety Instructions Use only LiPo-compatible chargers. Do not charge above 4.20V. Do not discharge below the recommended cut-off voltage. Do not short-circuit the battery terminals. Do not puncture, crush, or expose the battery to fire. Store partially charged in a cool, dry place when not in use. Ensure connector polarity matches your device before connection.
702035 LiPo Battery 400mAh 3.7V High Discharge 25C For Drone
[LiPo Cell] LiPo Battery 400mAh 3.7V High Discharge 702035 3.7V Lithium Polymer Battery • 400mAh Capacity • 25C High Discharge • 702035 Cell • Molex 2.0mm 2-Pin Connector The LiPo Battery 400mAh 3.7V High Discharge 702035 is a compact and lightweight Lithium Polymer (LiPo) rechargeable battery designed for applications that require high current output in a small form factor. Built with high-quality lithium polymer cells, this battery delivers a nominal voltage of 3.7V and a 400mAh capacity, making it ideal for RC toys, drones, mini helicopters, robotics, wireless electronics, and DIY projects. With a 25C continuous discharge rating, this battery can provide rapid bursts of current for motors and other high-power devices. The battery comes with a Molex 2.0mm 2-pin connector and an integrated protection PCB, offering added safety during charging and discharging. The 702035 cell size refers to the approximate dimensions of 7.0 × 20 × 35 mm, allowing the battery to fit easily into compact electronic devices while maintaining excellent power-to-weight performance. Note: This battery is intended for high-discharge applications such as RC models and robotics. It is not recommended for long-duration low-current devices such as cameras or data loggers. ⭐ Features High-quality 3.7V 400mAh LiPo battery 25C continuous discharge capability Compact 702035 cell size Lightweight design Stable voltage output Built-in protection circuit (PCB) Pre-installed Molex 2.0mm 2-pin connector Excellent power-to-weight ratio Rechargeable and reusable Suitable for high-current applications Easy plug-and-play installation 📋 Technical Specifications Product Type: Rechargeable Lithium Polymer (LiPo) Battery Battery Chemistry: Lithium Polymer (Li-ion Polymer) Cell Size: 702035 Nominal Voltage: 3.7V Full Charge Voltage: 4.20V Typical Capacity: 400mAh Discharge Rating: 25C Continuous Dimensions: Approx. 7.0 × 20 × 35 mm Weight: Approx. 12g Connector Type: Molex 2.0mm 2-Pin Protection Circuit: Built-in PCB Protection Rechargeable: Yes 🔧 Applications Suitable for: RC Cars RC Airplanes RC Helicopters Drones & Quadcopters Robotics Projects Arduino Projects ESP32 Projects DIY Electronics Portable Devices Wireless Modules Educational Projects Electronic Prototyping Battery Replacement Projects Miniature Electronics 📦 Package Includes 1 × LiPo Battery 400mAh 3.7V High Discharge 702035 with Molex 2.0mm 2-Pin Connector
0.3–4mm Mini Drill Chuck with Key & 2.3mm Brass Shaft Adapter for 555 DC Motor
[General DC Motor] 🔧 0.3–4mm Mini Drill Chuck with Key & 2.3mm Brass Shaft Adapter for 555 DC Motor 0.3–4mm Chuck Capacity • JT0 Drill Chuck • 2.3mm Brass Shaft Adapter • Ideal for DIY Mini Drill Machines The 0.3–4mm Mini Drill Chuck with Key and 2.3mm Brass Shaft Adapter is a high-quality accessory designed for converting 555 DC motors into compact mini drilling machines. This complete set includes a precision JT0 drill chuck, a 2.3mm brass motor shaft adapter, and a chuck key for secure tightening and loosening of drill bits. Manufactured from high-carbon steel, the drill chuck provides excellent durability, wear resistance, and high clamping accuracy. It securely holds drill bits ranging from 0.3mm to 4.0mm, making it suitable for precision drilling in wood, plastic, acrylic, PCB boards, resin, aluminum, and other soft materials. The included 2.3mm brass shaft adapter offers a precise fit on 555 DC motor shafts, ensuring smooth power transmission with minimal vibration. Its corrosion-resistant brass construction provides excellent durability and reliable performance for long-term use. This mini drill chuck kit is widely used in DIY mini drill machines, PCB drilling, model making, hobby crafts, jewelry making, electronics repair, and educational projects. ⭐ Features Precision 0.3–4mm JT0 mini drill chuck Includes 2.3mm brass shaft adapter High-carbon steel chuck construction Brass motor shaft connector Secure key-operated chuck mechanism High clamping accuracy Strong impact and wear resistance Smooth and stable operation Easy installation on 555 DC motors Suitable for DIY mini drill machines Compatible with drill bits from 0.3mm to 4mm Compact and lightweight design 📋 Technical Specifications Product Type: Mini Drill Chuck Kit Chuck Capacity: 0.3mm – 4.0mm Chuck Type: JT0 Keyed Drill Chuck Chuck Material: High-Carbon Steel Adapter Material: Brass Motor Shaft Diameter: 2.3mm Connection Type: JT0 Taper Tightening Method: Chuck Key Compatible Motor: 555 DC Motor Application: Mini Electric Drill Conversion Color: Silver & Brass 🔧 Applications Suitable for: DIY Mini Drill Machines 555 DC Motor Projects PCB Drilling Electronics Repair Model Making Jewelry Making Woodworking Plastic Drilling Acrylic Drilling Resin Crafts Hobby Projects Educational Projects Small Precision Drilling Prototype Development 📦 Package Includes 1 × 0.3–4mm JT0 Mini Drill Chuck 1 × Chuck Key (Spanner) 1 × 2.3mm Brass Shaft Adapter ⚠️ Note Designed for 2.3mm diameter motor shafts. Recommended for 555 DC motors and compatible motors with a 2.3mm shaft. Suitable for drilling soft materials such as wood, plastic, acrylic, PCB, and aluminum. Not intended for heavy-duty industrial drilling or hammer drilling applications. Product appearance may vary slightly depending on the manufacturing batch.
3.7V BMS 1S 2A 18650 Lithium Battery Protection Board
[Lithium Battery Protection Board] The 1S 3.7V Lithium Battery Protection Board (BMS/PCM) is a compact battery management module designed specifically for single-cell lithium-ion batteries such as 18650, 14500, and similar 3.7V rechargeable cells. It continuously monitors battery voltage and current to ensure safe charging and discharging operations. In addition, the module provides multiple layers of protection including overcharge, over-discharge, overcurrent, and short-circuit protection. As a result, it helps extend battery life and improves the safety of battery-powered devices. Because of its compact size, the protection board can be easily integrated into DIY battery packs, portable electronics, LED lighting systems, and rechargeable battery projects. Furthermore, the board uses nickel-strip compatible terminals for easy battery pack assembly. The protection circuit is designed for long-term reliable operation and helps prevent damage caused by improper charging or excessive current draw. Moreover, it offers high voltage detection accuracy for improved battery management performance. ⚠️ Note: This protection board is designed for 3.7V Lithium-Ion batteries only and is not suitable for LiFePO4 batteries. 🔹 Key Features Single-cell (1S) lithium battery protection board Suitable for 18650 lithium-ion batteries Overcharge protection Over-discharge protection Overcurrent protection Short-circuit protection High voltage detection accuracy Compact and lightweight design Easy installation and integration Long operational life 🔹 Pin Configuration B+ : Battery Positive Terminal B- : Battery Negative Terminal P+ : Charge / Discharge Positive Terminal P- : Charge / Discharge Negative Terminal 🔹 Technical Specifications Product Type: Lithium Battery Protection Module (BMS/PCM) Battery Configuration: 1S (Single Cell) Compatible Battery Type: 3.7V Lithium-Ion (18650, 14500, etc.) Operating Voltage Range: 3.2V – 4.2V Overcharge Detection Voltage: 4.25 ± 0.05V Overcharge Release Voltage: 4.23 ± 0.05V Over-discharge Detection Voltage: 2.54 ± 0.1V Continuous Charge Current: 2A Continuous Discharge Current: 2A Maximum Supported Current: 2A – 5A Protection Functions: Overcharge, Over-discharge, Overcurrent, Short Circuit Terminal Type: Nickel Strip Compatible Board Life Expectancy: More than 20,000 Operating Hours 🔹 Applications This protection board is suitable for: 18650 battery packs Rechargeable lithium battery projects DIY power banks Portable electronics LED lighting systems Battery-powered devices Robotics projects Arduino and ESP32 power systems 🔹 Important Notes Not suitable for LiFePO4 batteries Not recommended for high-current motors above 4A Not suitable for electric bicycles or high-power battery packs Ensure correct polarity during installation Use only with compatible lithium-ion cells 🔹 Package Includes 1 × 1S 3.7V 2A Lithium-Ion Battery Protection Board (BMS/PCM)
5 Pin Mini SPDT Relay 12V 10A 250V PCB Mount Electromagnetic Relay
[Relay Module, Relays] 12V PCB Mount Sugar Cube SPDT Relay – 5 Pin 10A The 12V PCB Mount Sugar Cube SPDT Relay is a compact Single Pole Double Throw (SPDT) electromagnetic relay designed for switching AC and DC electrical loads using a microcontroller, sensor, automation circuit, or other low-power control system. Its compact PCB-mount design makes it suitable for DIY electronics, home automation, security systems, switching circuits, motor control, lighting control, and embedded applications. The relay features a 12V DC coil and a 5-pin SPDT configuration consisting of two coil terminals, COM (Common), NO (Normally Open), and NC (Normally Closed) contacts. When the coil is energized, the internal contact switches between the NC and NO terminals. With contact ratings of up to 10A at 250V AC, 10A at 125V AC, 12A at 120V DC, and 10A at 28V DC, this relay is suitable for a wide range of electrical switching applications. ⭐ Key Features SPDT (Single Pole Double Throw) relay 12V DC coil Compact Sugar Cube design 5-pin configuration PCB mounting type 10A @ 250V AC contact rating 10A @ 125V AC contact rating 12A @ 120V DC contact rating 10A @ 28V DC contact rating Coil resistance: approximately 270Ω Approximately 45mA nominal coil current 50/60Hz frequency specification Fast switching response Suitable for microcontroller and sensor-controlled switching Ideal for automation and control applications 📋 Technical Specifications Product Type: PCB Mount Relay Relay Type: SPDT (Single Pole Double Throw) Contact Configuration: 1 Form C Number of Pins: 5 Coil Voltage: 12V DC Trigger Voltage: 12V DC Coil Resistance: 270Ω Nominal Coil Current: Approximately 45mA Frequency: 50/60Hz Maximum AC Load: 10A @ 250V AC Maximum AC Load: 10A @ 125V AC Maximum DC Load: 12A @ 120V DC Maximum DC Load: 10A @ 28V DC Operating Time: 10ms Release Time: 5ms Mounting Type: PCB Mount Contact Terminals: COM / NO / NC Coil Terminals: Coil End 1 / Coil End 2 🔌 Pin Configuration Coil End 1: One terminal of the 12V DC relay coil Coil End 2: Other terminal of the 12V DC relay coil COM: Common switching contact NO: Normally Open contact NC: Normally Closed contact When the relay coil is not energized, COM is connected to NC. When the 12V DC coil is energized, COM switches from NC to NO. 🛠️ How It Works The relay uses an electromagnetic coil to mechanically switch an electrical circuit. Applying 12V DC to the coil energizes the relay and changes the contact position. A load connected between COM and NC remains connected when the relay is inactive. A load connected between COM and NO remains disconnected until the relay coil is energized. This allows a low-power control circuit such as an Arduino, microcontroller, sensor, timer, or automation controller to control a higher-current AC or DC load. 🔧 Applications Arduino Projects Microcontroller Projects Sensor-Controlled Switching Home Automation Security Systems Lighting Control Fan Control Motor Control Pump Control Power Supply Switching Industrial Control Systems Embedded Electronics DIY Electronics Projects 📦 Package Includes 1 × 12V PCB Mount Sugar Cube SPDT Relay – 5 Pin 10A ⚠️ Precautions Use a suitable 12V DC supply for the relay coil. Do not exceed the specified contact voltage and current ratings. Check the COM, NO, NC, and coil terminals before wiring. Use suitable flyback protection when driving the relay coil from sensitive electronic circuits. Use appropriate suppression/protection components for inductive loads such as motors, solenoids, and coils. Provide sufficient PCB insulation and clearance when switching mains voltage. Disconnect power before changing or modifying wiring. Do not touch exposed mains-voltage terminals during operation.
220-240V AC Swing Motor Gear Motor for Air Cooler Synchronous Motor
[AC Motor] The 220-240V AC Swing Motor Gear Motor is a compact synchronous motor specially designed for air cooler oscillation and swing movement applications. It delivers smooth and stable low-speed rotation, making it ideal for automatic airflow control systems. In addition, the motor operates directly on standard 220-240V AC power, eliminating the need for external driver circuits. As a result, it can be easily integrated into household appliances and industrial cooling equipment. Because of its synchronous motor design, the motor maintains stable rotational speed based on the AC supply frequency. Furthermore, the built-in gear reduction mechanism provides controlled torque and smooth swing movement with low noise operation. The motor is designed for continuous duty applications and features low power consumption with reliable long-term performance. Moreover, the compact body and screw-mount design allow quick installation and easy replacement in air coolers and oscillation systems. This synchronous swing motor is widely used in air coolers, ventilation systems, oscillating fans, automation projects, and household appliances. 🔹 Key Features Designed for air cooler swing operation Operates directly on 220-240V AC supply Smooth synchronous gear motor operation Stable low-speed rotation Low noise and low power consumption Compact and lightweight construction Durable internal gear mechanism Suitable for continuous operation 🔹 Technical Specifications Product Type: AC Synchronous Swing Motor Motor Type: Gear Reduction Synchronous Motor Operating Voltage: 220V–240V AC Rated Frequency: 50/60Hz Rotation Speed: Typically 4–6 RPM (depends on model) Power Consumption: Approx. 4W–5W Rotation Direction: CW / CCW Gear Mechanism: Internal Reduction Gear Shaft Type: Metal Round-Shaft Mounting Type: Screw Mount Insulation Class: Class E Body Material: Metal + Plastic Operating Temperature: -10°C to +55°C Noise Level: Low Noise Operation Duty Cycle: Continuous Duty Application Type: Swing / Oscillation Mechanism 🔹 Working Principle This motor works using synchronous AC motor technology, where the rotor rotates according to the AC supply frequency. The internal reduction gears decrease the motor speed while increasing torque, allowing smooth and controlled oscillation movement. 🔹 Applications This swing motor is suitable for many electrical and mechanical applications, including: Air coolers Oscillating fans Ventilation systems Swing control mechanisms Household appliances Automation systems DIY electronics projects 🔹 Package Includes 1 × 220-240V AC Swing Motor Gear Motor
Type-C MT3608 Adjustable Dc to Dc Converter 2-24V to 5V-28V 2A
[Step UP Buck Converter] DC-DC Adjustable Boost Power Supply Module 2V–24V to 5V/9V/12V/28V 2A Type-C The DC-DC Adjustable Boost Power Supply Module is a compact step-up power conversion module designed to increase a lower DC input voltage to a higher adjustable output voltage. It supports a wide 2V–24V input range and provides an adjustable output from approximately 5V to 28V, making it suitable for battery-powered devices, microcontrollers, sensors, portable electronics and DIY power projects. With a compact 30 × 17 × 8mm design and Type-C connector, this module is convenient for projects where space and flexible power input are important. ⭐ Key Features DC-DC boost/step-up converter Wide 2V–24V input voltage range Adjustable output voltage Output options include approximately 5V, 9V, 12V and 28V Maximum output current: 2A Conversion efficiency: >93% Compact and lightweight design Type-C input connector Suitable for battery-powered applications Easy to integrate into DIY electronics projects 📋 Technical Specifications Product Type: DC-DC Boost Converter Module Input Voltage: 2V–24V DC Output Voltage: 5V–28V adjustable Maximum Output Current: 2A Peak Output Current: Up to 2A Efficiency: >93% Input Connector: USB Type-C Product Size: 30 × 17 × 8mm Weight: Approximately 4g Condition: New 🔧 Applications Arduino and microcontroller projects Raspberry Pi and electronic development projects Battery-powered devices Portable power systems GPS and sensor projects LED applications Robotics projects Motors and actuators DIY power supplies Low-voltage to higher-voltage power conversion Portable electronic equipment 🛠️ How It Works This module uses a DC-DC boost conversion circuit to increase the input DC voltage. For example: 3.7V battery → 5V output 5V input → 9V output 5V/12V input → higher adjustable output The required output voltage can be adjusted according to the application. ⚠️ Important Notes This is a boost/step-up module; the output voltage cannot be lower than the applicable input voltage range. Do not exceed the specified 24V maximum input voltage. Do not exceed the 2A maximum output current. Actual maximum output power depends on input voltage, output voltage, cooling and module operating conditions. At higher output power, adequate ventilation/cooling may be required. Always verify the output voltage with a multimeter before connecting sensitive electronics. Do not short-circuit the output. The module does not automatically regulate to 5V/9V/12V/28V; the output must be set to the required voltage. 📦 Package Includes 1 × DC-DC Adjustable Boost Module 2V–24V to 5V/9V/12V/28V, 2A, Type-C
Out of stockN20 3-6V 60RPM digital clock Micro Metal Gear Motor
[Gear Motor] Overview of this N20 3-6V 60RPM digital clock motor Introducing the N20 3-6V 60RPM Digital Clock Micro Metal Gear Motor. A compact and reliable motor designed for precise and efficient time keeping device. With a specific focus on digital clock mechanisms. This motor work on 3-6V range. And also provide high performance to drive the intricate components of digital timepieces. The motor’s work on 60RPM speed & also ensure smooth movement for the best function of digital clocks. This N20 Digital Clock Motor with 60RPM gives quiet and low vibration operation. It also make it best choice for clock mechanisms where minimal noise is crucial. The metal gear construction adds durability and reliability to the motor. And also confirms that this is a long life and consistent performance over time. The N20 3-6V 60RPM Micro Metal Gear Motor gives the ideal combination of power and precision for your clock project. In summary, the N20 3-6V 60RPM Digital Clock Micro Metal Gear Motor is tailored for digital clock applications. And also offer a versatile voltage range, precise 60RPM speed, and durable metal gear construction. Upgrade your clock projects with this reliable and efficient motor for accurate timekeeping. Features Voltage Versatility: The N20 3-6V 60RPM Digital Clock Micro Metal Gear Motor excels with its adaptable voltage range of 3-6V. And also offer flexibility for easy use in various digital clock project. Precise 60RPM Speed: Featuring a specific 60 revolutions per minute (RPM) speed. This motor also ensure precise and smooth movement in digital clocks, guarantee accurate timekeeping without any disruptions. Low Noise and Vibration: Crafted for a quiet operation, the N20 Digital Clock Motor minimizes both noise and vibration. And also provide an ideal solution for clock device where a tranquil environment is important. Durable Metal Gear Construction: The motor’s robust metal gear construction enhances durability and reliability, promising a prolonged lifespan and consistent performance for sustained and dependable timekeeping. Compact and Efficient: With its compact design. This micro metal gear motor efficiently drives clock mechanisms. It also make it best choice for digital clock projects where space efficiency is paramount. Specification Specification Details No Load Current (mA) 0.04 A Stall Current (A) 0.67 Rated Torque (kg-cm) 0.65 Stall Torque (Kg-Cm) 2.6 Motor Body Size (Diameter) (mm) 12 Operating Voltage (VDC) 3 ~ 6 Rated Operating Voltage (VDC) 6 No Load Speed (RPM) 60 Rated Speed (RPM) 60 Shaft Type D-type, Single Side Shaft Diameter (mm) 3 Weight (gm) 12 Output Axial Length (mm) 10 Fuselage w/o Shaft Length 26 Main use of this N20 3-6V 60RPM metal gear motor Digital Clock Mechanisms: The N20 3-6V 60RPM Motor is perfect for powering the precise movement of digital clock hands. And ensure accurate timekeeping in various clock designs. Robotics Applications: This motor is perfect for small scale robotics projects & provide a compact and efficient solution with precise torque for specific robotic movements. Educational Projects: Valuable for educational purposes, the N20 3-6V 60RPM Motor serves as an excellent tool for teaching basic motor mechanics, voltage concepts, and RPM principles. DIY Electronic Devices: Versatile for DIY enthusiasts, this motor is ideal for creating electronic devices like rotating displays or small gadgets, demanding controlled and consistent motion. Automated Systems: In automated systems, the N20 Motor plays a crucial role where controlled and reliable motor movement is important & contribute to the efficiency of various automated mechanisms. Package Includes: 1 x N20 3-6V 60RPM digital clock Micro Metal Gear Motor
Mitsumi MAP-AM-265 Micro Air Pump Motor
[DC Air Pump] Overview of this MAP-AM-265 Micro Air Pump Motor Introducing the Mitsumi MAP-AM-265 Micro Air Pump Motor at the best price in India . This MAP-AM-265 Micro Air Pump Motor gives reliable and efficient airflow in a compact size. Its advanced design and confirms that this is smooth operation and consistent performance. It is use for both hobbyist projects and professional use, the Micro Air Pump Motor is versatile and dependable. The Micro Air Pump Motor MAP-AM-265 is engineered for precision and durability. It gives strong and stable air flow and making it suitable for diverse tasks. Whether you’re working on a DIY project or integrating it into a device and this air pump excels in performance. Its compact size allows for easy installation and space-saving solutions. With this air pump, you gain a robust tool that combines efficiency and reliability. The Air Pump Motor is crafted to meet high standards of quality. It’s perfect for applications requiring reliable air pumping in a small form factor. Trust this Micro Air Pump Motor to give exceptional results and enhance your projects Features Compact and efficient design: The micro air pump motor is compact and fitting into tight spaces. It gives efficient air pumping without taking up much room. High-performance operation: It gives reliable and consistent airflow for different applications. It is use for tasks requiring steady air movement. Low power consumption: It operates with minimal power, making it energy-efficient. Helps reduce overall energy costs while maintaining performance. Durable construction: High-quality materials make it durable and long-lasting, and its design allows it to withstand regular use in demanding conditions. Versatile application: It is suitable for a range of applications and including medical devices and small machinery. Adaptable for use in different settings requiring precise air pumping. Specification Specification Details Model MAP-AM-265 Type Micro Air Pump Motor Voltage 12V DC Current 0.3A Power Consumption 3.6 Watts Air Flow Rate 1.5 L/min Pressure 0.2 MPa Noise Level ≤45 dB Operating Temperature -10°C to 40°C Dimensions 44 x 28 x 23 mm Weight 60 grams Motor Type Brushless DC Motor Material Plastic and Metal Components Mounting Type Surface Mountable Lifespan 10,000 Hours Noise Reduction Integrated Noise Reduction Technology Connection Type Wire Leads Certification RoHS, CE Usage Suitable for Medical Devices, Aquariums, and Small Airflow Applications Package Includes: 1 x Mitsumi MAP-AM-265 Micro Air Pump Motor
Single Shaft BO Motor 100 RPM
[Gear Motor] 100 RPM Single Shaft BO Motor – Straight Shaft The 100 RPM Single Shaft BO Motor is a lightweight and cost-effective solution designed for DIY robotics, small automation systems, and educational projects. Offering an excellent balance between torque and speed at low operating voltages, this motor is ideal for small to medium-sized robots. With its compact and durable construction, the motor features pre-drilled mounting holes for easy installation and perfectly pairs with 69mm robot wheels, making it an excellent choice for 2WD mobile robot platforms. Its low noise, low power consumption, and reliable torque output make it a favorite among hobbyists, students, and developers. Specifications: Shaft Length: 7mm Shaft Diameter: 5.5mm Motor Size: 55 × 48 × 23mm Voltage Range: 3V – 12V DC No-load Current: 40 – 180mA Speed: 100 RPM @ 6V Torque: 0.35 kg-cm Key Features: Lightweight and compact design Cost-effective with injection-molded housing Resilient, shock-absorbing construction Low power consumption and minimal maintenance Quiet operation with reduced friction Corrosion-resistant for long life Easy mounting with pre-drilled holes Ideal For: DIY robotics and automation projects Line follower and obstacle-avoiding robots Educational robotics kits Small mechanical prototypes Package Includes: 1 × 100 RPM Single Shaft BO Motor (Straight Shaft)
Out of stockDC 12V Mini 370 Diaphragm Pump Self-Priming Suction Pressure Water Pump
[DC Water Pump] DC 12V mini 370 Self-Priming Water pump Introducing DC 12V Mini 370 Self-Priming Water Pump at best price in India with . Designed for durability and this DC 12V Mini 370 Diaphragm Pump offers consistent performance with self-priming capability & ensure smooth operation even at varying pressure. Compact and lightweight, this 12V 370 mini water pump is perfect for application like aquariums, small fountain, and portable water system. With its robust suction capabilities, this DC 12V Self-Priming Suction Pressure Water Pump ensure effective water flow in diverse setting. Its low power consumption and quiet operation make it perfect for both indoor and outdoor use. Built with high quality material, this pump is resistant to wear & ensure reliable performance over time. Feature Self-Priming Mechanism: This DC 12V mini 370 Self-Priming Water pump pump feature a self priming design for efficient water transfer. It ensure stable performance even with changing water level. Compact and Lightweight: Its small size and low weight make it easy to use in small space. Perfect for portable application need minimal space usage. High Suction Power: This water pump deliver strong suction power for quick and effective water movement. It can handle low pressure condition without loosing output efficiency. Durable Build Quality: This DC 12V Mini 370 Diaphragm Pump made from high quality material, this pump offer long lasting durability and performance. It resists wear and tear & ensure reliable operation over time. Versatile Application: It is also perfect for aquarium, small garden, and DIY water circulation project. The pump works effectively for a variety of home and industrial uses. Specification Specification Details Operating Voltage 12V DC Current Consumption 0.5A – 1A (depending on load) Flow Rate 1.5-2.5 liters per minute Maximum Pressure Up to 2.5 bar (36 PSI) Suction Lift Up to 2 meters Discharge Head Up to 3 meters Motor Type 370 brushed motor Self-Priming Yes, capable of dry priming Body Material High-quality plastic with corrosion resistance Port Diameter Inlet and outlet: 4mm Noise Level Low noise operation (<65 dB) Lifespan Over 1000 hours of continuous operation Applications Water transfer, small irrigation systems, DIY project Dimensions 24x61x24mm Weight 60g Package Includes: 1 x DC 12V Mini 370 Diaphragm Pump Self-Priming Suction Pressure Water Pump