All products · 100 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Corsair RM850e ATX 3.1 Gold Fully Modular Power Supply (850W)
[Power Supply] Corsair RM850e Fully Modular Low-Noise ATX 3.1 Power Supply Corsair RMe Series fully modular power supplies deliver quiet, reliable 80 PLUS Gold and Cybenetics Gold rated power to your PC. ATX 3.1 and PCIe 5.1 compliant with native 12V-2x6 cable for modern RTX 40/50 series GPUs. ⭐ Key Features - ATX 3.1 & PCIe 5.1 Certified with native 12V-2x6 GPU connector - 80 PLUS Gold & Cybenetics Gold certified energy efficiency - 105°C-rated industrial-grade capacitors for steady power and long-term reliability - Zero RPM Fan Mode for near-silent operation at low to medium loads - 120mm rifle bearing fan with specially calculated fan curve - 7-Year Corsair Manufacturer Warranty 📋 Technical Specifications - Continuous Power: 850 Watts - Efficiency: 80 PLUS Gold - Fan Size: 120mm Rifle Bearing - Dimensions: 140 x 150 x 86 mm (Compact 140mm length) - Connectors: 1x ATX 24-pin, 2x EPS 8-pin, 1x PCIe 12V-2x6 (16-pin), 3x PCIe 8-pin, 7x SATA 📦 Package Includes - 1 x Corsair RM850e 850W Modular Power Supply - 1 x Complete Modular Black Cable Set & AC Power Cord
Logitech MX Master 4 Wireless Ergonomic Mouse (Graphite)
[Mouse] Logitech MX Master 4 Wireless Ergonomic Productivity Mouse - Graphite The gold standard in productivity. Features Quiet Clicks, 8,000 DPI Darkfield sensor that tracks anywhere (even on glass), MagSpeed electromagnetic scrolling up to 1,000 lines per second, and multi-device Logi Bolt + Bluetooth connectivity. ⭐ Key Features - MagSpeed Electromagnetic Scrolling: Ultra-fast, ultra-quiet, pixel-precise - 8,000 DPI Darkfield High Precision sensor tracks on any surface including glass - Quiet Click buttons reduce click noise by 90% - Cross-computer Flow control between up to 3 PCs or Macs - USB-C Quick Charging: Up to 70 days battery life on full charge; 3 hours from 1 minute charge 📋 Technical Specifications - Sensor: Darkfield high precision (200 - 8000 DPI) - Buttons: 7 buttons (Left/Right, Back/Forward, App-Switch, Wheel mode-shift, Middle click) - Wireless: Bluetooth Low Energy + Logi Bolt USB Receiver (10m range) - Battery: Rechargeable Li-Po (500 mAh) - Weight: 141 grams 📦 Package Includes - 1 x Logitech MX Master 4 Mouse (Graphite) - 1 x Logi Bolt USB Receiver - 1 x USB-C Charging Cable
26650 Battery Holder / Battery Spacer 2×1 – 26.3mm Bore Diameter
[Lithium Battery Holder] 26650 Battery Holder / Battery Spacer 2×1 – 26.3mm Bore Diameter The 26650 Battery Holder / Battery Spacer 2×1 is a cylindrical battery spacer designed to securely arrange 26650 lithium-ion battery cells while building multi-cell battery packs. Made from flame-retardant ABS+PC material, it provides a strong and stable structure while allowing air circulation around the cells. The holder features interlocking slots on the edges, allowing multiple spacers to be joined together to create different battery-pack sizes and configurations. After welding nickel strips, the assembled battery pack can achieve a solid and reliable structure without requiring additional connecting hardware. ⭐ Key Features Designed for 26650 cylindrical lithium-ion cells 2 × 1 configuration 26.3mm bore diameter Made from flame-retardant ABS+PC material High-temperature resistant construction Crack-resistant design Interlocking slots for connecting multiple spacers Allows flexible battery-pack configurations Provides mechanical support for battery cells Helps maintain proper spacing between cells Suitable for high-current battery-pack construction Helps improve battery-pack stability and reliability Allows airflow around the cells for heat dissipation 📋 Technical Specifications Product Type: Battery Holder / Battery Spacer Compatible Cell: 26650 cylindrical battery Configuration: 2 × 1 Number of Cells: 2 Bore Diameter: 26.3mm Material: Flame-retardant ABS+PC Construction: Interlocking modular design Mounting: Multiple spacers can be joined together Application: Lithium battery pack assembly Cell Type: Cylindrical Li-ion cells 🔧 Applications 26650 lithium-ion battery packs E-bike battery packs Electric scooter battery packs Electric vehicle battery packs Power-tool battery packs DIY high-current battery packs UPS battery systems Solar energy storage packs Portable power stations Robotics battery packs Custom lithium battery assemblies 🛠️ How to Use The spacer is designed to hold two 26650 cells in a 2×1 arrangement. Multiple spacers can be connected through the slots provided around the edges to create larger battery-pack configurations. For a complete battery pack: Cell → Spacer → Nickel Strip Welding → Additional Spacers → Battery Pack For mechanical support, spacers can be positioned at the top and bottom of the cells. Important: For each individual battery cell, 2 spacers are recommended—one at the top and one at the bottom. 💡 Advantages Simple Assembly: Easy to arrange cylindrical cells. Flexible Design: Multiple spacers can be interconnected to create different pack shapes. Strong Construction: Helps keep cells firmly positioned. Heat Dissipation: Provides spacing between cells and allows airflow. Reliable Battery Pack: Helps make the completed pack mechanically stable. Suitable for Complex Packs: Useful for custom battery configurations, including e-bike and high-current applications. ⚠️ Important Notes This product is only a battery holder/spacer; batteries are not included. The 26.3mm bore is intended for compatible 26650 cells. Check your actual cell diameter before purchase. Do not force oversized cells into the holder. Battery cells should be properly insulated and securely assembled. Use suitable nickel strip and an appropriate spot-welding method. Use a suitable BMS/protection system for the completed lithium battery pack. Battery cells should be properly matched before assembling a multi-cell pack. 2 spacers are recommended per individual cell, one on each end. Keep the battery assembly away from excessive heat, moisture and physical damage. 📦 Package Includes 1 × 26650 Battery Holder / Battery Spacer – 2×1, 26.3mm Bore Diameter Note: Battery cells, nickel strips and BMS are not included.
KWS-MX18 10-in-1 USB Tester Digital LCD Voltage, Current & Power Meter
[Ammeter and Voltmeter] KWS-MX18 10-in-1 USB Tester – Digital LCD Voltage, Current & Power Meter The KWS-MX18 10-in-1 USB Tester is a compact multifunction digital testing instrument designed for monitoring and evaluating USB chargers, power banks, USB ports, mobile charging systems, and other DC power sources. It provides real-time measurement of voltage, current, power, capacity, energy, charging time, resistance, and internal temperature on its digital display. The tester supports a DC voltage range of 4–30V and current measurement up to approximately 5.1A, with power measurement up to 150W. It also provides capacity and energy monitoring, making it useful for checking the actual charging performance and capacity of USB power supplies and power banks. ⭐ Key Features 10-in-1 multifunction USB tester Digital LCD display Real-time voltage and current monitoring Measures power consumption Measures accumulated charging capacity Measures energy consumption Charging time measurement Charging resistance measurement Internal temperature measurement Positive and negative voltage measurement Stores measurement data in 9 groups Power-off memory function Compact and lightweight design Suitable for USB charger and power-bank testing Supports QC2.0 / QC3.0 according to available product information 📋 Technical Specifications Product Type: 10-in-1 USB Digital Tester Model: KWS-MX18 Input Voltage Range: DC 4–30V Current Measurement: 0–5.1A Power Measurement: 0–150W Capacity Measurement: 0–999999mAh Energy Measurement: 0–999999mWh Timing Range: 0–99 Hours Charging Resistance: 0–999.9Ω Internal Temperature: 0–80°C Positive Voltage Measurement: 0–10V Negative Voltage Measurement: 0–10V Memory Groups: 1–9 Display: Digital LCD Material: ABS Dimensions: Approximately 56.6 × 24.7 × 11.2mm Weight: Approximately 13.9g Input Connector: USB Output Connector: USB Function Button: Yes 🔍 10 Measurement Functions Voltage: 4–30V DC Current: 0–5.1A Power: 0–150W Capacity: 0–999999mAh Energy: 0–999999mWh Charging Time: 0–99 hours Charging Resistance: 0–999.9Ω Positive Voltage: 0–10V Negative Voltage: 0–10V Internal Temperature: 0–80°C 💾 Memory Function The KWS-MX18 can store charging measurement information in 9 separate memory groups. This allows you to compare charging capacity and energy measurements from different chargers or devices. The stored data can be viewed using the function button, and an individual memory group can be cleared by holding the button for approximately 3 seconds. 🔘 Button Functions Single Press: View stored measurement data from memory groups 1–9. Long Press: Clear the currently selected memory group. Double Press: Change the display page. Calibration: The device supports voltage and current calibration according to the supplied manual. 🔌 Applications USB Charger Testing Mobile Charger Testing Power Bank Testing USB Port Testing Mobile Phone Charging Analysis USB Cable Testing Power Supply Monitoring DC Power Measurement Electronics Troubleshooting DIY Electronics Projects Charger Performance Testing Battery Charging Analysis 🛠️ How to Use Connect the KWS-MX18 in-line between the USB power source and the USB-powered device. Once powered, the LCD displays the measured electrical parameters. You can use the function button to change display pages and access stored measurement data. It is particularly useful for comparing chargers, power banks, cables, and USB ports by monitoring actual voltage, current, power, capacity, and energy delivered. 📦 Package Includes 1 × KWS-MX18 10-in-1 USB Digital Tester ⚠️ Color Note: Color: White / Black Color will be shipped depending on stock availability. Any one color (White or Black) may be shipped based on available stock. Specific color cannot be guaranteed. ⚠️ Precautions Do not exceed the specified 30V DC input voltage. Do not exceed the specified current measurement range. Ensure correct USB connection direction before use. Keep the tester away from water and excessive moisture. Do not use it for measuring mains AC voltage. The device is intended for DC/USB power measurement. Actual measurement accuracy can depend on the connected source, load, cable, and operating conditions.
107 × 61mm 5V 180mA Mini Solar Panel Cell Module
[Solar Panel] ☀️ 107 × 61mm 5V 180mA Mini Solar Panel Cell Module (0.9W) 5V Output • 180mA Current • Polycrystalline Solar Cell • Compact & Lightweight • DIY Solar Projects The 107 × 61mm Mini Solar Panel Cell Module is a compact and efficient photovoltaic module designed to convert sunlight into clean and renewable electrical energy. Delivering a stable 5V output with a maximum current of 180mA, this solar panel is ideal for powering small electronic devices, battery charging circuits, educational projects, and DIY solar applications. Built using high-quality polycrystalline silicon solar cells, the panel provides efficient energy conversion with reliable performance under direct sunlight. Its compact size and lightweight construction make it easy to integrate into portable electronics, robotics, IoT devices, and renewable energy projects. Designed with a durable, weather-resistant construction, the module is suitable for both indoor demonstrations and outdoor applications. Pre-drilled mounting holes allow quick installation on enclosures, backpacks, models, and custom solar-powered devices. ⭐ Features High-efficiency polycrystalline solar panel Stable 5V DC output Maximum output current of 180mA Maximum power output of 0.9W Compact and lightweight design Efficient solar energy conversion Weather-resistant construction Pre-drilled mounting holes Easy integration into DIY projects Eco-friendly renewable energy source Maintenance-free operation Suitable for educational and hobby applications 📋 Technical Specifications Product Type: Mini Solar Panel Cell Module Panel Dimensions: 107 × 61 mm Cell Type: Polycrystalline Silicon Maximum Power Output: 0.9W Output Voltage: 5V DC Maximum Output Current: 180mA Conversion Efficiency: Approx. 17% Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +85°C Construction: Waterproof, Weather-Resistant Mounting: Pre-Drilled Mounting Holes Material: High-Quality Polycrystalline Silicon Weight: Approx. 16g 🔧 Applications Suitable for: DIY Solar Projects Solar Battery Chargers Mobile Charging Projects Arduino Projects ESP32 Projects Raspberry Pi Accessories Robotics IoT Devices Solar Garden Lights Educational Science Experiments Portable Electronics Renewable Energy Demonstrations Emergency Backup Projects Small DC Power Applications 📦 Package Includes 1 × 107 × 61mm 5V 180mA Mini Solar Panel Cell Module ⚠️ Note Output voltage and current depend on sunlight intensity, panel angle, and environmental conditions. For battery charging applications, use a suitable charge controller or charging module. Designed for low-power electronic projects and educational use. Product appearance and dimensions may vary slightly depending on the manufacturing batch.
110 × 69mm 5V 180mA Mini Solar Panel Cell Module
[Solar Panel] ☀️ 110 × 69mm 5V 180mA Mini Solar Panel Cell Module (0.9W) 5V Output • 180mA Current • 0.9W Power • Polycrystalline Solar Cell • Compact & Lightweight The 110 × 69mm 5V 180mA Mini Solar Panel Cell Module is a compact and efficient photovoltaic module designed to convert sunlight into clean, renewable electrical energy. Delivering a stable 5V output with a maximum current of 180mA, this solar panel is ideal for powering low-power electronic devices, DIY solar projects, battery charging applications, and educational experiments. Built using high-quality polycrystalline silicon solar cells, the module offers efficient energy conversion while maintaining reliable performance under sunlight. Its lightweight construction and compact dimensions make it easy to integrate into portable devices, robotics projects, solar-powered gadgets, and outdoor applications. Designed for durability, the panel features a weather-resistant construction suitable for outdoor use. With pre-drilled mounting holes, installation is quick and convenient for a wide range of renewable energy projects. ⭐ Features High-efficiency polycrystalline solar panel Stable 5V DC output Maximum output current of 180mA Maximum power output of 0.9W Compact size for portable projects Lightweight and easy to install Weather-resistant construction Pre-drilled mounting holes Suitable for outdoor applications Eco-friendly renewable energy source No external power source required Ideal for educational and DIY projects 📋 Technical Specifications Product Type: Mini Solar Panel Cell Module Cell Type: Polycrystalline Silicon Maximum Power Output: 0.9W Output Voltage: 5V DC Maximum Output Current: 180mA Panel Dimensions: 110 × 69 mm Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +85°C Construction: Weather-Resistant Connector: None (Solder Wire Connection) Weight: Approximately 15g 🔧 Applications Suitable for: DIY Solar Projects Solar Battery Chargers Mobile Phone Charging Projects Arduino Projects ESP32 & ESP8266 Projects Raspberry Pi Accessories Robotics Projects Solar Garden Lights Educational Science Experiments IoT Devices Portable Electronic Devices Renewable Energy Demonstrations Emergency Backup Power Projects Small DC Loads 📦 Package Includes 1 × 110 × 69mm 5V 180mA Mini Solar Panel Cell Module ⚠️ Note Output voltage and current depend on sunlight intensity and panel orientation. For battery charging applications, use a suitable solar charge controller or charging module. This panel is intended for low-power applications and may not provide sufficient power under low-light conditions. Product appearance may vary slightly depending on the manufacturing batch.
Blivex LFP32700 3.2V 6Ah LiFePO₄ Rechargeable Battery Cell
[LiFePO4 Battery Cell] 🔋 Blivex LFP32700 3.2V 6Ah LiFePO₄ Rechargeable Battery Cell High Capacity • Long Cycle Life • High Discharge Performance • Ideal for Energy Storage & Electric Vehicles The Blivex LFP32700 3.2V 6Ah LiFePO₄ Rechargeable Cell is a premium cylindrical lithium iron phosphate (LiFePO₄) battery designed for high-performance energy storage and power applications. Featuring a nominal voltage of 3.2V, 6Ah capacity, and up to 18A continuous discharge current, this cell delivers stable output voltage, excellent safety, and long service life. The specification identifies the product as a LFP32700-6.0Ah LiFePO₄ cylindrical rechargeable cell. Manufactured with a robust steel enclosure, the battery offers excellent resistance to vibration, shock, and harsh operating conditions while maintaining low self-discharge and high energy efficiency. It is suitable for battery packs used in electric vehicles, solar energy storage systems, portable power stations, communication backup systems, robotics, and industrial equipment. The datasheet also highlights its sturdy steel case, high capacity, long cycle life, stable output voltage, and good high/low temperature performance. Datasheet : Click Here To Open ⭐ Features High-capacity 6Ah LiFePO₄ cylindrical cell Nominal voltage of 3.2V Excellent cycle life of 2000+ cycles High continuous discharge capability up to 18A (3C) Peak pulse discharge current up to 30A (5C) Low internal resistance (≤8mΩ) Stable output voltage Low self-discharge High safety and thermal stability Sturdy pressure-resistant steel casing Excellent vibration and shock resistance Suitable for battery pack assembly 📋 Technical Specifications Brand: Blivex Model: LFP32700-6.0Ah Battery Chemistry: Lithium Iron Phosphate (LiFePO₄) Battery Type: Cylindrical Rechargeable Cell Nominal Voltage: 3.2V Nominal Capacity: 6.0Ah Energy Density: 142Wh/kg Internal Resistance: ≤8mΩ (AC, 1000Hz) Limited Charge Voltage: 3.65V Charge Method: CC/CV Standard Charge Current: 0.5C Maximum Charge Current: 1C Charge Cut-off Current: 0.3A Discharge Cut-off Voltage: 2.0V Standard Discharge Current: 6A (1C) Maximum Continuous Discharge Current: 18A (3C) Maximum Pulse Discharge Current: 30A (10 seconds) Cycle Life: 1500 Cycles (25°C, 100% DOD) Charge Temperature: 0°C to 60°C Recommended Charge Temperature: 15°C to 40°C Discharge Temperature: -30°C to 60°C Recommended Discharge Temperature: 15°C to 40°C Cell Diameter: 32.2 ± 0.3mm Cell Height: 70.5 ± 0.3mm Weight: 135 ± 5g These specifications are taken from the manufacturer's datasheet. 🔧 Applications Suitable for: Solar Energy Storage Systems Portable Power Stations Home Energy Storage UPS Backup Systems Electric Scooters Electric Tricycles Electric Four-Wheel Vehicles Electric Logistics Vehicles Battery Pack Manufacturing Communication Backup Power Industrial Energy Storage Robotics Projects DIY LiFePO₄ Battery Packs Marine & RV Power Systems The manufacturer lists applications including electric two-wheel vehicles, tricycles, logistics vehicles, special vehicles, portable energy storage, household energy storage, industrial energy storage, and communication backup power. 📦 Package Includes 1 × Blivex LFP32700 3.2V 6Ah LiFePO₄ Rechargeable Battery Cell ⚠️ Note Use only with a compatible LiFePO₄ charger and an appropriate Battery Management System (BMS). Do not short-circuit, crush, puncture, disassemble, or expose the battery to fire or excessive heat. Store the battery in a cool, dry place when not in use. Product appearance may vary slightly depending on the manufacturing batch. The datasheet includes additional handling, storage, and safety precautions for transportation, storage, and battery use.
ESP32-C3 Super Mini Development Board With Headers Pins
[ESP Modules] Ultra Compact • Wi-Fi & BLE 5.0 • USB Type-C • Perfect for IoT & Embedded Projects The ESP32-C3 Super Mini Development Board is a compact, feature-rich development board built around the powerful ESP32-C3 SoC from Espressif. Powered by a 32-bit RISC-V single-core processor running at up to 160MHz, it combines 2.4GHz Wi-Fi, Bluetooth 5.0 Low Energy (BLE), and low-power operation in an ultra-small form factor. Designed for IoT, smart home, wireless communication, automation, and embedded system development, the ESP32-C3 Super Mini offers 4MB Flash memory, 400KB SRAM, multiple GPIOs, ADC, PWM, UART, SPI, and I2C interfaces for connecting sensors, displays, relays, and other peripherals. The onboard USB Type-C interface simplifies programming and power supply, while the built-in USB-to-Serial functionality enables quick firmware uploading without requiring additional programmers. Fully compatible with Arduino IDE, ESP-IDF, PlatformIO, and MicroPython, it is suitable for beginners, students, makers, and professional developers. Its ultra-compact breadboard-friendly design makes it ideal for portable and space-constrained projects where performance, wireless connectivity, and energy efficiency are essential. Note: Programming, software configuration, driver installation, firmware flashing, and coding-related issues are not covered under return or replacement. Users are expected to troubleshoot software-related issues independently. ⭐ Features Powerful ESP32-C3 32-bit RISC-V processor CPU frequency up to 160MHz Built-in 2.4GHz Wi-Fi (802.11 b/g/n) Integrated Bluetooth 5.0 Low Energy (BLE) Ultra-compact Super Mini design Breadboard-friendly layout USB Type-C interface for programming and power 4MB onboard Flash memory 400KB SRAM Multiple GPIO, ADC, PWM, UART, SPI & I2C interfaces Low power consumption with Deep Sleep mode Onboard programmable LED Compatible with Arduino IDE, ESP-IDF, PlatformIO & MicroPython Ideal for IoT, automation, robotics, and wireless applications 📋 Technical Specifications Product Type: Development Board Board Model: ESP32-C3 Super Mini Microcontroller: ESP32-C3 Processor Architecture: 32-bit RISC-V CPU Frequency: Up to 160MHz Core: Single Core Flash Memory: 4MB SRAM: 400KB Wi-Fi Standard: IEEE 802.11 b/g/n (2.4GHz) Bluetooth: Bluetooth 5.0 Low Energy (BLE) Operating Voltage: 3.3V Input Voltage: 5V via USB Type-C or 3.3V External USB Interface: USB Type-C GPIO: Multiple Digital GPIO Pins Analog Input: Up to 6 ADC Channels PWM: Supported UART: Supported SPI: Supported I2C: Supported USB-to-Serial: Onboard Onboard LED: User Programmable (GPIO8) Power Consumption: Ultra Low (Deep Sleep ≈ 43µA) Dimensions: Approx. 22.5 × 18 mm Headers: Pre-Soldered 🔧 Applications Suitable for: Internet of Things (IoT) Smart Home Automation Wireless Sensor Networks Home Automation Systems Bluetooth Low Energy Devices Wi-Fi Enabled Controllers Robotics Projects Data Logging Systems Remote Monitoring Industrial Automation Portable Embedded Devices Educational Learning DIY Electronics Projects Wearable Electronics Rapid Prototyping 📦 Package Includes 1 × ESP32-C3 Super Mini Development Board Pin Headers ⚠️ Note Programming, firmware installation, software configuration, and driver-related issues are not covered under warranty, return, or replacement. Please verify board compatibility and install the appropriate development environment before programming. Soldered and non-soldered header pin depend on stock
Winway 18650 Lithium-Ion Rechargeable Battery 3.7V 2600mAh 9.62Wh
[Lithium Battery Cell] The Winway 18650 Lithium-Ion Rechargeable Battery is a high-performance cylindrical Li-ion cell designed to deliver reliable and long-lasting power for a wide range of electronic devices. With a nominal voltage of 3.7V, 2600mAh capacity, and 9.62Wh energy rating, it provides consistent power output for both high-drain and low-drain applications. Manufactured using premium lithium-ion cell technology, this battery offers excellent energy density, stable discharge performance, and long cycle life. Its standard 18650 form factor makes it compatible with most battery holders, chargers, and devices designed for 18650 cells. The Winway 2600mAh battery is widely used in rechargeable flashlights, emergency lights, battery packs, power banks, Bluetooth speakers, portable fans, solar lighting, DIY electronics, robotics, and various battery-operated devices. Designed for durability and dependable performance, this battery delivers excellent backup time while maintaining stable voltage throughout the discharge cycle. ⭐ Features High-quality 18650 Lithium-Ion rechargeable battery 2600mAh high-capacity cell Nominal voltage of 3.7V Energy rating of 9.62Wh Stable discharge performance High energy density Long charge and discharge cycle life Lightweight and compact cylindrical design Suitable for battery pack assembly Compatible with standard 18650 battery holders and chargers 📋 Technical Specifications Product Type: Lithium-Ion Rechargeable Battery Brand: Winway Battery Model: 18650 Nominal Voltage: 3.7V Nominal Capacity: 2600mAh Energy: 9.62Wh Battery Chemistry: Lithium-Ion (Li-ion) Cell Type: Rechargeable Form Factor: Cylindrical 18650 Diameter: Approx. 18mm Length: Approx. 65mm Weight: Approx. 45g Color: Green Rechargeable: Yes Made In: India Pack Quantity: 1 Piece 🔧 Applications Suitable for: Rechargeable Flashlights Emergency Lights Power Banks Bluetooth Speakers Portable Fans Solar Lighting Systems DIY Battery Packs Robotics Projects Arduino Projects ESP32 Projects Electronic Toys Portable Electronic Devices Medical Equipment (Compatible Models) Industrial Electronic Equipment 📦 Package Includes 1 × Winway 18650 Lithium-Ion Rechargeable Battery 3.7V 2600mAh ⚠️ Safety Instructions Use only a compatible Li-ion battery charger. Do not short-circuit, puncture, crush, or disassemble the battery. Do not expose the battery to fire, excessive heat, or water. Observe correct polarity during installation. Do not overcharge or over-discharge the battery. Store in a cool, dry place away from direct sunlight.
10-in-1 USB & Type-C Digital Tester – IPS Voltmeter, Ammeter, Impedance & Capacity Meter
[Ammeter and Voltmeter] The 10-in-1 USB & Type-C Digital Power Tester is a multifunction USB measurement instrument developed for engineers, technicians, hobbyists, and electronics enthusiasts. It accurately monitors USB charging performance while providing comprehensive electrical measurements for USB-A and USB Type-C devices. Equipped with a bright IPS true-color LCD display, the tester simultaneously displays ten important charging parameters including Voltage, Current, Power, Capacity (mAh), Energy (mWh), Cable Resistance, Temperature, Charging Time, D+ Voltage, and D− Voltage. The tester features both USB-A and USB Type-C input/output interfaces, allowing compatibility with traditional USB chargers as well as modern USB-C Power Delivery devices. It supports testing of fast chargers, mobile phones, tablets, laptops, power banks, USB cables, and various USB-powered electronics. With support for measurements up to 150W and 5A, this tester is suitable for high-power USB-C PD chargers while consuming less than 20mA of operating current. Built-in control buttons allow users to switch display modes, perform fast-charge diagnostics, and manage measurement functions easily. Its compact design makes it an excellent tool for electronics repair, charger verification, cable testing, battery capacity measurement, laboratory work, and DIY electronics projects. 🔹 Key Features Dual Interface: USB-A & USB Type-C Input/Output Supports USB PD and Fast Charging IPS Full Color LCD Display Measures Voltage, Current and Power Capacity (mAh) & Energy (mWh) Measurement Cable Resistance (Impedance) Measurement Internal Temperature Monitoring USB D+ / D− Voltage Detection Charging Timer Function High Accuracy Measurement Low Self Power Consumption Compact Portable Design Easy Operation with Dedicated Function Buttons 🔹 Technical Specifications Product Type: USB Digital Power Tester Display: IPS True Color LCD Input Interface: USB-A / USB Type-C Output Interface: USB-A / USB Type-C Maximum Power Measurement: 150W Maximum Current: 5A Voltage Measurement: USB Standard & USB-C PD Power Measurement Range: 0–150W Current Measurement: Up to 5A Capacity Measurement: mAh Energy Measurement: mWh Impedance Measurement Range: 1–999.9Ω Temperature Measurement: 0°C to 80°C USB D+ Voltage Range: 0–2.99V USB D− Voltage Range: 0–2.99V Timer Range: 999 Hours 59 Minutes Refresh Rate: Approximately 500ms Self Power Consumption: <20mA Operating Buttons: Mode / Power Dimensions: 76.9 × 38 × 11 mm 🔹 Applications This USB tester is suitable for: USB charger testing USB-C PD charger testing Power bank capacity testing Mobile charger verification Fast charging protocol diagnostics USB cable resistance testing Laptop USB-C charger testing Electronics repair DIY electronics projects Laboratory measurements Battery charging analysis Quality inspection of USB power supplies 🔹 Package Includes 1 × 10-in-1 USB & Type-C Digital Power Tester 🔹 Frequently Asked Questions (FAQ) What does "10-in-1" mean? It measures ten important parameters: Voltage, Current, Power, Capacity, Energy, Impedance, Temperature, Charging Time, D+ Voltage, and D− Voltage. Does it support both USB-A and USB Type-C? Yes. It features both USB-A and USB Type-C input and output interfaces. What is the maximum power it can measure? Up to 150W. What is the maximum current supported? Up to 5A. Can it test USB-C laptop chargers? Yes. It supports high-power USB-C PD chargers up to 150W. Can it measure charging cable quality? Yes. It measures cable impedance from 1Ω to 999.9Ω. Does it display temperature? Yes. It includes an internal temperature sensor with a range of 0°C to 80°C. Does it require batteries? No. It is powered directly from the connected USB source. Can it measure power bank capacity? Yes. It records charging capacity in mAh and mWh. Does it support fast charging protocols? Yes. It can monitor USB D+ and D− voltages, helping identify fast charging protocol handshakes.
3.7V 700mAh 503035 Rechargeable Lithium Polymer (Li-Po) Battery for DIY Electronics, Robotics
[LiPo Cell] The 503035 3.7V 700mAh Rechargeable Lithium Polymer Battery is a compact and reliable power source designed for portable electronic devices and embedded applications. Manufactured using advanced Lithium Polymer (Li-Po) technology, it provides high energy density, lightweight construction, and excellent charge/discharge performance. In addition, the battery delivers a nominal voltage of 3.7V and a capacity of 700mAh, making it suitable for devices that require compact size with extended runtime. As a result, it is widely used in Bluetooth speakers, wireless headphones, GPS trackers, drones, robotics, IoT devices, portable medical equipment, and DIY electronics projects. Because of its slim profile, the battery can be easily integrated into compact electronic enclosures where space is limited. Furthermore, its low self-discharge rate and long cycle life ensure dependable performance over repeated charging cycles. The battery comes with pre-attached wires and a connector (connector type may vary by batch), allowing quick installation in compatible devices. Moreover, it supports safe charging using standard 3.7V Lithium Polymer battery chargers or BMS protection circuits. ⚠️ Note: Charge the battery only with a compatible Lithium Polymer charger or charging protection module. Do not short-circuit, puncture, overcharge, or expose the battery to high temperatures. 🔹 Key Features Rechargeable Lithium Polymer (Li-Po) battery High energy density Compact and lightweight design Stable 3.7V output 700mAh capacity Long charge/discharge cycle life Low self-discharge Pre-attached connection wires Suitable for portable electronic devices Reliable and safe performance 🔹 Technical Specifications Battery Type: Lithium Polymer (Li-Po) Model: 503035 Nominal Voltage: 3.7V Full Charge Voltage: 4.2V Capacity: 700mAh Battery Dimensions: Approx. 5 × 30 × 35 mm Rechargeable: Yes Charging Method: CC/CV (Constant Current / Constant Voltage) Standard Charge Voltage: 4.2V Protection Circuit: May vary depending on batch Operating Temperature: -10°C to +60°C Weight: Approximately 15–18g 🔹 Applications This battery is suitable for: Bluetooth speakers Bluetooth headsets Mini drones RC toys Robotics projects IoT devices GPS trackers Portable electronic devices DIY electronics projects Wearable electronics 🔹 Package Includes 1 × 503035 3.7V 700mAh Rechargeable Lithium Polymer Battery
702025 3.7V 400mAh rechargeable Battery for Drone, Toys, Gaming, Robotics bluetoorh Headset, Bluetooth Speaker
[LiPo Cell] The 702025 3.7V 400mAh Rechargeable Lithium Polymer Battery is a compact and high-performance power source designed for portable electronic devices requiring lightweight and reliable energy storage. Built using advanced Lithium Polymer (Li-Po) technology, it provides high energy density, low self-discharge, and consistent output voltage. In addition, the battery delivers a nominal voltage of 3.7V with a capacity of 400mAh, making it suitable for powering compact electronic devices and embedded systems. As a result, it is widely used in drones, Bluetooth speakers, Bluetooth headsets, wireless gaming accessories, robotics, GPS devices, wearable electronics, and DIY battery-powered projects. Because of its slim profile and lightweight construction, the battery can be easily integrated into space-constrained applications. Furthermore, it supports multiple charge and discharge cycles while maintaining stable performance and long service life. The battery includes a pre-attached connector with insulated leads for quick installation and safe operation. Moreover, its rechargeable design makes it an economical and environmentally friendly power solution. ⚠️ Note: Charge the battery only with a compatible 3.7V Lithium Polymer battery charger or BMS protection circuit. 🔹 Key Features Rechargeable Lithium Polymer (Li-Po) battery High energy density Compact and lightweight design Stable 3.7V output Long charge/discharge cycle life Low self-discharge rate Pre-attached connection wires Suitable for portable electronic devices Reliable and safe performance Ideal for DIY electronics projects 🔹 Technical Specifications Battery Type: Lithium Polymer (Li-Po) Model: 702025 Nominal Voltage: 3.7V Full Charge Voltage: 4.2V Capacity: 400mAh Battery Dimensions: Approx. 7 × 20 × 25 mm Rechargeable: Yes Protection Circuit: Yes Charging Method: CC/CV (Constant Current / Constant Voltage) Operating Temperature: -10°C to +60°C Weight: Approximately 6–7g 🔹 Applications This battery is suitable for: Mini drones RC toys Bluetooth headsets Bluetooth speakers Wireless gaming controllers Robotics projects GPS trackers Wearable electronics DIY electronic devices Portable rechargeable products
3V 100mA LED Filament 45mm COB Edison Bulb Filament
[COB LED] The 3V 100mA LED Filament 45mm is a flexible COB LED light source designed for decorative lighting, Edison bulb restoration, DIY lamps, and creative illumination projects. Available in a variety of colors, it delivers bright and uniform light output while maintaining low power consumption. In addition, the filament provides 360-degree illumination, closely replicating the appearance of traditional Edison-style incandescent filaments. As a result, it is widely used in decorative bulbs, custom lighting fixtures, model lighting, art installations, and creative electronics projects. Because of its flexible substrate design, the filament can be slightly bent to fit custom enclosures and unique lighting arrangements. Furthermore, it produces minimal heat during operation, making it safe for compact and enclosed lighting applications. The advanced COB LED structure ensures consistent brightness, excellent efficiency, and long service life. Moreover, the solderable metal terminals allow quick integration into DIY electronics and lighting projects. 🔹 Key Features Available in multiple colors Bright and uniform light output COB LED filament design Low power consumption Excellent energy efficiency Minimal heat generation 360° illumination pattern Lightweight and compact structure Easy solderable metal terminals Long operational life 🔹 Technical Specifications Product Type: COB LED Filament Operating Voltage: 2.8V to 3.2V DC Rated Voltage: 3V DC Forward Current: 100mA (Maximum) Power Consumption: Approximately 0.3W Brightness: Approximately 80–100 Lumens per Watt Filament Type: COB (Chip-on-Board) LED Filament Base Material: Flexible Polymer Substrate Connection Type: Solderable Metal End-Caps led Length: 45mm Total Length: 55mm Filament Diameter: Approximately 2.0mm Terminal Size: Approximately 2mm × 2mm Weight: Less than 1g Available Colors: Warm White, Cool White, Red, Blue, Green (subject to availability) 🔹 Mechanical Specifications Filament construction Durable polymer substrate Highly resistant to mechanical shock Lightweight design Easy soldering connection terminals Suitable for custom lamp and lighting assemblies 🔹 Applications This LED filament is suitable for: Edison bulb repair and replacement Decorative LED lamps Custom lighting fixtures Battery-powered lighting projects Art installations Scale models and dioramas Display and showcase lighting Wearable electronics DIY electronics projects Creative lighting applications 🔹 Package Includes 1 × 3V 100mA LED Filament 38mm (Selected Color)
Keltron 3300uF 25V Radial Electrolytic Capacitor High Performance Capacitor
[Through Hole Capacitor] The Keltron 3300uF 25V Electrolytic Capacitor is a high-performance aluminum electrolytic capacitor designed for energy storage, voltage filtering, and ripple suppression applications. It is widely used in power supply circuits, audio amplifiers, inverter systems, battery chargers, and industrial electronics. In addition, the capacitor provides excellent filtering capability by reducing voltage fluctuations and unwanted electrical noise. As a result, it helps improve circuit stability and enhances overall system performance. Because of its 3300uF high capacitance value, the capacitor is ideal for smoothing DC power rails and handling transient current demands. Furthermore, the 25V DC voltage rating makes it suitable for a variety of low-voltage electronic applications. The radial lead design allows easy PCB installation and secure mounting. Moreover, Keltron capacitors are known for their dependable quality, stable electrical characteristics, and long operational life. This capacitor is commonly used in audio amplifier power supplies, SMPS circuits, LED power supplies, inverter systems, battery chargers, and DIY electronics projects. 🔹 Key Features Genuine Keltron capacitor High capacitance 3300uF value Rated voltage of 25V DC Excellent ripple filtering performance Suitable for audio and power supply circuits Low leakage current Long operational life Radial lead through-hole design Reliable and stable performance 🔹 Technical Specifications Brand: Keltron Product Type: Electrolytic Capacitor Capacitor Type: Aluminum Electrolytic Capacitance: 3300uF Rated Voltage: 25V DC Tolerance: ±20% Mounting Type: Through-Hole (Radial Lead) Polarized: Yes Lead Type: Radial Operating Temperature: Up to 105°C (Series Dependent) Application: Filtering, Decoupling, Energy Storage 🔹 Applications This capacitor is suitable for: Audio amplifier circuits Power supply filtering SMPS circuits Inverter systems Battery chargers LED driver circuits Industrial electronics DIY electronics projects Electronic repair applications 🔹 Package Includes 1 × Keltron 3300uF 25V Radial Electrolytic Capacitor
16mm Ultrasonic Humidifier Atomizer Disc Piezoelectric Mist Maker Transducer Module 108KHz
[Ultrasonic Sensor] The 16mm Ultrasonic Humidifier Atomization Module is a high-efficiency piezoelectric transducer designed for mist generation and humidification applications. It operates using ultrasonic vibration technology to convert water into ultra-fine mist particles quickly and efficiently. In addition, the module works on the principle of ultrasonic cavitation, where high-frequency sound waves generate rapid compression and rarefaction inside the water. As a result, microscopic water droplets are released into the air as cool mist. Because of its 108KHz resonant frequency, the atomizer produces fine and uniform fog particles while maintaining low noise operation. Furthermore, the compact 16mm design allows easy integration into humidifiers, aroma diffusers, medical atomizers, and DIY mist generation systems. The atomization disc is built using durable piezoelectric material for long operational life and stable performance. Moreover, the module consumes very little power while providing efficient mist output. ⚠️ Note: This atomizer module requires a compatible ultrasonic driver board for operation. The driver circuit is not included in the package and must be purchased separately. This ultrasonic humidifier module is widely used in humidifiers, beauty care devices, medical atomization equipment, aroma diffusers, and DIY electronics projects. 🔹 Key Features 16mm ultrasonic atomizer disc High-frequency 108KHz operation Fine and uniform mist generation Low noise operation Small fog particle output Long operational life High stability performance Low power consumption Suitable for humidifier and mist maker projects 🔹 Technical Specifications Product Type: Ultrasonic Atomizer Transducer Module Atomizer Diameter: 16mm Operating Voltage: DC 3.7V –5V Resonant Frequency: 108KHz Resonant Impedance: < 2 Ohms Coupling Factor: > 52% Electrostatic Capacity: 3000pF Spray Quantity: > 110mL/h Operation Type: Ultrasonic Piezoelectric Atomization Fog Particle Type: Ultra-Fine Mist Noise Level: Low Noise Operation Material: Piezoelectric Ceramic + Metal 🔹 Working Principle The ultrasonic atomizer uses a piezoelectric transducer immersed in water. When driven at high frequency, the transducer creates rapid mechanical oscillations that generate cavitation bubbles and surface waves. Consequently, microscopic water droplets are released into the air as cool mist with minimal energy consumption. 🔹 Applications This ultrasonic atomizer module is suitable for many applications, including: Humidifiers Mist makers Aroma diffusers Medical atomizers Facial beauty equipment DIY humidification projects Decorative fog systems 🔹 Package Includes 1 × 16mm Ultrasonic Humidifier Atomization Sensor Module
5V 100mA 0.5W Mini Solar Panel 70x70mm Polycrystalline DIY Solar Cell Charger
[Solar Panel] The 5V 100mA 0.5W Mini Solar Panel is a compact and efficient photovoltaic module designed for small solar power applications and DIY renewable energy projects. Made using high-quality polycrystalline silicon, this solar panel converts sunlight into usable electrical energy with reliable performance. In addition, the panel delivers a stable 5V output with up to 100mA current, making it suitable for charging small batteries, powering low-power devices, and educational electronics projects. As a result, it is widely used in portable solar applications, science experiments, and DIY electronic systems. Because of its lightweight and compact design, the panel can be easily installed in limited spaces. Furthermore, the durable epoxy surface improves protection against moisture and environmental conditions, helping ensure long-term outdoor use. The solar panel features excellent low-light performance and high conversion efficiency for improved energy generation. Moreover, the exposed copper connection pads allow easy soldering and quick integration into custom electronic projects. This mini photovoltaic panel is commonly used in solar DIY kits, battery chargers, garden lighting, educational projects, portable electronics, and renewable energy systems. 🔹 Key Features High-efficiency polycrystalline solar panel Stable 5V output voltage Lightweight and compact design Excellent low-light performance Durable epoxy-coated surface Easy soldering connection pads Waterproof and long-lasting structure Suitable for DIY and educational projects 🔹 Technical Specifications Product Type: Mini Solar Panel Material: Polycrystalline Silicon Output Voltage: 5V Output Current: 0–100mA Rated Power: 0.5W Dimensions: 70mm × 70mm × 3mm Surface Type: Epoxy Coated Connection Type: Copper Tape Pads Application Type: Solar Charging / DIY Projects 🔹 Applications This mini solar panel is suitable for many applications, including: DIY solar projects Small battery charging Educational electronics kits Portable solar devices Garden lighting systems Renewable energy experiments Low-power electronics projects 🔹 Package Includes 1 × 5V 100mA 0.5W Mini Epoxy Solar Panel
TDT LiFePO4 LFP 4S 12.8V 25A Battery Management System
[Lithium Battery Protection Board] The TDT 4S 12.8V 25A LiFePO4 Battery Management System (BMS) is designed to protect and manage 4-cell LiFePO4 battery packs. It continuously monitors each cell’s voltage and current to ensure safe and stable operation. In addition, the BMS includes a balancing function, which helps maintain equal voltage across all cells. As a result, the battery pack delivers better performance and longer life. Moreover, the module provides multiple protection features, including overcharge, over-discharge, overcurrent, and short-circuit protection. Therefore, it prevents damage to the battery and improves reliability. Because of its compact design and efficient performance, this BMS is ideal for solar systems, backup power solutions, electric vehicles, and DIY battery packs. 🔹 Key Features Supports 4S LiFePO4 (LFP) battery packs Nominal voltage 12.8V 25A continuous discharge current Built-in cell balancing High reliability and stable operation Compact and easy to install Suitable for various battery applications 🔹 Protection Functions Overcharge protection Over-discharge protection Overcurrent protection Short-circuit protection Temperature protection (if supported) 🔹 Technical Specifications Parameter Specification Brand TDT Battery Type LiFePO4 (LFP) Battery Configuration 4S Nominal Voltage 12.8V Max Continuous Current 25A Balance Function Yes Application Lithium battery protection 🔹 Applications Solar battery systems DIY LiFePO4 battery packs Backup power systems Electric scooters and bikes Energy storage systems (ESS) 🔹 Package Includes 1 × TDT 4S 12.8V 25A LiFePO4 BMS Board
902030 3.7V 600mAh LiPo Rechargeable Battery for Bluetooth Speaker, RC Drone, Toys, DIY & Robotics
[LiPo Cell] The 902030 3.7V 600mAh Lithium Polymer Battery is a lightweight rechargeable battery designed for small electronic devices and hobby projects. With a 3.7V nominal voltage and 600mAh capacity, it provides stable and reliable power for portable electronics. Its slim pouch design allows easy installation in compact devices such as Bluetooth speakers, RC drones, toys, GPS trackers, IoT devices, and robotics projects. Lithium Polymer batteries offer high energy density, low self-discharge, and long cycle life, making them ideal for modern electronic devices and DIY applications. 🔹 Key Features Nominal Voltage 3.7V Capacity 600mAh Compact lightweight LiPo battery Rechargeable lithium polymer cell High energy density Stable discharge performance Suitable for portable electronics Ideal for DIY electronics projects 🔹 Technical Specifications Parameter Specification Model 902030 Battery Type Lithium Polymer (LiPo) Nominal Voltage 3.7V Fully Charged Voltage 4.2V Capacity 600mAh Cell Type Pouch cell Charging Method CC-CV Rechargeable Yes 🔹 Applications Bluetooth speakers RC drones RC toys Robotics projects DIY electronics GPS trackers IoT devices Portable gadgets 🔹 Package Includes 1 × 902030 3.7V 600mAh Lithium Polymer Rechargeable Battery ⚠ Color and label may vary depending on stock batch. ⚠ Safety Instructions Do not short circuit battery terminals Do not charge above 4.2V Do not discharge below 3.0V Use a compatible LiPo charger module (TP4056 recommended) Do not puncture or expose battery to heat or fire Do not charge unattended
Out of stock803040 3.7V 1000mAh LiPo Battery | Rechargeable Lithium Polymer Battery Cell
[LiPo Cell] The 803040 3.7V 1000mAh Lithium Polymer Battery is a lightweight and compact rechargeable battery designed for portable electronic devices and embedded applications. With a stable 3.7V nominal voltage and 1000mAh capacity, it provides reliable power for IoT projects, DIY electronics, Bluetooth devices, and wearable gadgets. This LiPo battery features a flat pouch design that allows easy integration into compact devices. The high energy density and stable discharge characteristics make it suitable for applications requiring long-lasting power in a small form factor. The battery can be charged using standard LiPo charging modules and provides dependable performance for hobby electronics and portable systems. 🔹 Key Features Nominal Voltage 3.7V Capacity 1000mAh Lightweight and compact pouch design Rechargeable Lithium Polymer battery High energy density Low self-discharge rate Stable discharge performance Suitable for portable electronics 🔹 Technical Specifications Parameter Specification Model 803040 Battery Type Lithium Polymer (LiPo) Nominal Voltage 3.7V Fully Charged Voltage 4.2V Capacity 1000mAh Charging Method CC-CV Discharge Cut-off Voltage 3.0V Cell Type Pouch Cell Rechargeable Yes 🔹 Applications DIY electronics projects IoT devices Bluetooth modules Portable gadgets GPS devices Wearable electronics Robotics projects Power banks 🔹 Package Includes 1 × 803040 3.7V 1000mAh Lithium Polymer Rechargeable Battery ⚠ Battery color and label may vary depending on batch. ⚠ Safety Instructions Do not short circuit the battery terminals. Do not charge above 4.2V. Do not discharge below 3.0V. Use a LiPo compatible charger. Do not puncture or expose to fire. Do not charge unattended. Store in a cool and dry place.
Out of stock146074 3.7V 10000mAh Rechargeable Lithium Polymer (Li-Po) Battery Cell for Power Bank & Electronic Devices
[LiPo Cell] The 146074 3.7V 10000mAh Lithium Polymer Rechargeable Battery Cell is a high-capacity flat Li-Po battery designed for portable electronic devices and power bank applications. With a large 10000mAh capacity, it provides long-lasting power while maintaining a compact and lightweight design. This lithium polymer cell is widely used in DIY power banks, Bluetooth speakers, tablets, GPS devices, IoT systems, portable electronics, and backup power systems. The battery includes protection circuitry compatibility and provides stable voltage output for reliable performance in demanding applications. 🔹 Key Features High capacity 10000mAh lithium polymer battery Nominal voltage 3.7V Lightweight and compact flat design Rechargeable Li-Po chemistry High energy density Stable discharge performance Suitable for portable electronics and DIY power banks 🔹 Technical Specifications Battery Type: Lithium Polymer (Li-Po) Model: 146074 Nominal Voltage: 3.7V Fully Charged Voltage: 4.2V Rated Capacity: 10000mAh Actual Capacity: 90-92% of Rated Capacity Cell Type: Flat pouch cell Charging Method: CC-CV (Constant Current / Constant Voltage) Charge Voltage: 4.2V Discharge Cut-off Voltage: 3.0V Rechargeable: Yes 🔹 Applications Power banks DIY battery packs Bluetooth speakers Portable electronics IoT devices GPS devices Tablets and handheld devices Backup power systems ⚠ Safety Instructions Do not short circuit battery terminals. Do not overcharge above 4.2V. Do not discharge below 3.0V. Use only compatible Li-Po charger or protection board. Do not puncture or expose battery to fire or heat. Do not charge unattended. Store in a cool and dry place. 🔹 Package Includes 1 × 146074 3.7V 10000mAh Lithium Polymer Battery Cell ⚠ Battery color and label may vary depending on stock batch.
2S 20A 7.4V / 8.4V 18650 Lithium Battery Protection Board with Balance
[Li-ion Rechargeable Battery Charger, Lithium Battery Protection Board] The 2S 7.4V / 8.4V 20A Lithium Battery Protection Board with Balancing is a compact and reliable Battery Management System (BMS) designed for 2-cell (2S) 18650 lithium-ion battery packs. This board provides complete protection and automatic cell balancing to ensure safe charging, stable discharging, and long battery life. With a nominal output of 7.4V and a full charge voltage of 8.4V, this protection board supports continuous current up to 20A, making it suitable for medium-power applications such as DIY battery packs, portable power tools, robotics, LED systems, solar projects, and backup power supplies. The built-in balancing function equalizes the voltage between both cells during charging, preventing overcharging of individual cells and improving overall pack efficiency and lifespan. Multiple protection features including over-charge, over-discharge, over-current, and short-circuit protection ensure maximum safety during operation. Compact in size and easy to wire, this BMS is ideal for both DIY users and professional battery pack manufacturers. ⭐ KEY FEATURES ✔ Designed for 2S (2-cell) 18650 lithium battery packs✔ 20A continuous discharge current support✔ Built-in cell balancing function✔ Protection against over-charge, over-discharge, over-current & short circuit✔ Improves battery safety, performance & lifespan✔ Compact PCB – easy to integrate✔ Ideal for DIY & professional battery pack builds 🔧 TECHNICAL SPECIFICATIONS Battery Configuration: 2S (2 cells in series) Nominal Voltage: 7.4V Full Charge Voltage: 8.4V Maximum Continuous Current: 20A Battery Type: 3.7V Li-ion (18650 rechargeable cells) Balancing Function: Yes (automatic during charging) Protection Functions: Over-charge protection Over-discharge protection Over-current protection Short-circuit protection 🔌 WIRING GUIDE – How to Connect 2S Battery Pack 🔹 Board Terminals (Typical Marking) B- → Battery negative (Cell 1 −) B1 → Between Cell 1 & Cell 2 B+ → Battery positive (Cell 2 +) 🔹 Output / Charger Terminals P- → Load / Charger negative P+ → Load / Charger positive (same as B+) 🔧 Connection Steps Connect Cell 1 negative → B- Connect Cell 1 positive / Cell 2 negative → B1 Connect Cell 2 positive → B+ Connect Load & Charger + → P+ (or B+) Connect Load & Charger − → P- ⚠️ Use only matched 18650 cells and an 8.4V Li-ion charger. 🎯 APPLICATIONS DIY lithium battery packs Power tools & cordless devices Robotics & automation projects LED lighting systems Solar battery packs Backup power & portable energy systems 📦 PACKAGE INCLUDES 1 × 2S 20A Lithium Battery Protection Board with Balancing
3W High Power White LED with Aluminum Heatsink – High Brightness Emitter Module
[LEDs] Upgrade your lighting projects with this 3 Watt High Power LED with Aluminum Heatsink, designed for excellent brightness and long-term reliability. The LED comes pre-mounted on a solid aluminum heatsink that efficiently dissipates heat, ensuring stable performance and extended lifespan. Perfect for DIY electronics, torch lights, spotlights, emergency lights, automotive lighting, and educational projects, this LED module delivers powerful illumination with low power consumption. Easy to install and compatible with standard constant-current LED drivers, this module is a reliable choice for both hobbyists and professionals. 🔹 Key Features High brightness 3W single-chip power LED Pre-mounted aluminum heatsink for effective cooling Long lifespan and stable light output Low power consumption, energy efficient Compact and easy-to-install design Ideal for DIY projects, flashlights, lamps, and experiments 🔹 Specifications Power: 3 Watt LED Type: High Power Single Chip Color : White Forward Voltage: 3.2V – 3.6V (typical) Current: 700mA (recommended constant current) Luminous Flux: ~180 – 240 Lumens (approx.) Heatsink Material: Aluminum Mount Type: Star PCB with attached heatsink Operating Life: Up to 50,000 hours 🔹 Package Includes 1 × 3W High Power LED with Aluminum Heatsink *Image shown is a representation only.
7S 20A BMS for 18650 Lithium-Ion Battery Pack – Protection Board with Connector
[Lithium Battery Protection Board] The BMS NMC 7S 20A Same Port is an advanced Battery Management System designed for high-performance 25.9V lithium NMC battery packs. Engineered with integrated protection features and a compact PCB layout, this BMS offers robust electrical safety while minimizing design complexity with its single port for both charging and discharging. This Data sheet is for Lichtronics 7S 20A NMC PCM/BMS Charging Voltage -DC:29.4-30V CC/CV Max continuous charging current – 20A Over charge detection voltage – 4.25±0.05V Over discharge detection voltage – 2.8±0.08V Over current detection current – 40A Operating Temperature -45°C –+65°C Storage Temperature -45°C — +85°C Product Data Sheet Key Features Same Port Design: Combines charging and discharging through a single port for streamlined connections. 20A Continuous Discharge: Supports mid-range power devices with stable performance. Multiple Safety Protections: Overcharge Protection Over-discharge Protection Overcurrent & Short Circuit Cut-off Temperature Detection Passive Balancing: Ensures equal charge across cells for longer battery life. Compact and Lightweight Design: Ideal for tight enclosures or portable builds. Connector Included: Easily connect to standard 7S battery configurations. Technical Specifications Specification Details Battery Chemistry Lithium NMC (3.7V/cell) Configuration 7S (7 Cells in Series) Nominal Voltage 25.9V Charge Cut-off Voltage 29.4V (4.2V per cell) Discharge Cut-off ~17.5V (2.5V per cell) Max Continuous Current 20A Port Type Same port for charge/discharge PCB Size Compact footprint Balance Current 30-60 mA Applications Electric Bikes & Scooters Solar Lighting & Backup Power Portable DIY Power Systems Battery Replacements & Packs Energy Storage & IoT Solutions The PCM NMC 07S/20A SAME PORT (SLCT) is a Protection Circuit Module (PCM) designed for lithium nickel manganese cobalt (NMC) battery packs configured in a 7-series (07S) setup. This module provides overcharge, over-discharge, overcurrent, and short-circuit protection to safeguard the battery and enhance its lifespan. It is rated for a maximum continuous current of 20A, allowing higher current flow for larger applications. The "SAME PORT" feature suggests that both charging and discharging can occur through the same port, simplifying the battery management system. The "SLCT" (selectable) feature likely refers to adjustable settings for specific battery configurations or protections. 📦 Package Includes 1 × 7S 20A BMS Protection Board (with connector)
Out of stock3.7V 1000mAh Li-Po Battery (503035P) – High-Quality Rechargeable Lithium Polymer Single Cell
[LiPo Cell] The 3.7V 1000mAh Lithium Polymer Battery (503035P) is a premium, high-performance rechargeable Li-Po cell designed for compact and portable electronics. Offering stable 3.7V output with excellent energy density, this lightweight battery is perfect for IoT devices, GPS trackers, Bluetooth gadgets, robotics projects, MP3 players, and various DIY electronics. Built using high-quality polymer materials, the 503035P battery ensures long cycle life, steady power delivery, and enhanced safety. With a built-in protection circuit module (PCM), it safeguards against overcharging, over-discharging, and short circuits—making it a reliable and safe power source for modern electronics that demand stability and durability. Whether you’re replacing an old battery or developing a new portable device, this 3.7V 1000mAh Li-Po cell delivers dependable performance in a slim and compact form factor. ✅ Features High-performance 3.7V Li-Po cell with 1000mAh capacity for long-lasting power Compact 503035P form factor perfect for space-restricted designs Stable and reliable voltage output for sensitive electronics Ideal for IoT modules, GPS trackers, Bluetooth gadgets, wearable tech, MP3 players, and DIY electronics High energy density ensures extended device runtime Includes PCM protection for safe operation—overcharge, over-discharge & short-circuit protection Rechargeable with long cycle life, suitable for continuous daily usage Slim, lightweight design for portable and compact devices 📘 Specifications Battery Type: Lithium Polymer (Li-Po) Model Number: 503035P Nominal Voltage: 3.7V Capacity: 1000mAh Charging Voltage: 4.2V Configuration: Single cell Protection Circuit (PCM): Yes Dimensions (Approx): 50mm × 30mm × 3.5mm Energy Density: High Discharge Rate: Suitable for low to medium power applications Rechargeable: Yes – long cycle life Weight: Lightweight Applications: IoT systems, GPS modules, robotics, Bluetooth devices, MP3 players, portable gadgets, DIY electronics Package Includes: 1 x 3.7V 1000mAh Li-Po Battery (503035P) – High-Quality Rechargeable Lithium Polymer Single Cell