All products · 83 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Corsair RM850e ATX 3.1 Gold Fully Modular Power Supply (850W)
[Power Supply] Corsair RM850e Fully Modular Low-Noise ATX 3.1 Power Supply Corsair RMe Series fully modular power supplies deliver quiet, reliable 80 PLUS Gold and Cybenetics Gold rated power to your PC. ATX 3.1 and PCIe 5.1 compliant with native 12V-2x6 cable for modern RTX 40/50 series GPUs. ⭐ Key Features - ATX 3.1 & PCIe 5.1 Certified with native 12V-2x6 GPU connector - 80 PLUS Gold & Cybenetics Gold certified energy efficiency - 105°C-rated industrial-grade capacitors for steady power and long-term reliability - Zero RPM Fan Mode for near-silent operation at low to medium loads - 120mm rifle bearing fan with specially calculated fan curve - 7-Year Corsair Manufacturer Warranty 📋 Technical Specifications - Continuous Power: 850 Watts - Efficiency: 80 PLUS Gold - Fan Size: 120mm Rifle Bearing - Dimensions: 140 x 150 x 86 mm (Compact 140mm length) - Connectors: 1x ATX 24-pin, 2x EPS 8-pin, 1x PCIe 12V-2x6 (16-pin), 3x PCIe 8-pin, 7x SATA 📦 Package Includes - 1 x Corsair RM850e 850W Modular Power Supply - 1 x Complete Modular Black Cable Set & AC Power Cord
Sound Playback Module
Voice board, recording, recorder, playback, mic, sound, audio loudspeaker.
Out of stockWD Purple 4 TB Surveillance HDD
3.5" CMR HDD tuned for 24/7 DVR/NVR recording. AllFrame technology.
Thermaltake Toughpower TF1 1650W 80 Plus Titanium Modular Power Supply
[Power Supply] Thermaltake Toughpower TF1 1650W 80 PLUS Titanium High-End Workstation SMPS Monstrous 1650W power supply engineered for extreme overclocking, quad-GPU AI workstation deep learning, and multi-CPU rendering servers. 80 PLUS Titanium certified with 94%+ efficiency. ⭐ Key Features - 1650W continuous output with Titanium 94% efficiency - Turbo Fan button boosts fan to maximum speed for extreme cooling - Low ripple noise and strict ±2% voltage regulation - 100% Japanese solid-state capacitors - Side ventilation honeycomb grille 📋 Technical Specifications - Max Output: 1650 Watts (Peak 1900W) - Connectors: 16x PCIe 8-pin, 2x EPS 8-pin, 16x SATA - Dimensions: 200 x 150 x 86 mm 📦 Package Includes - 1 x Thermaltake Toughpower TF1 1650W Titanium PSU - 1 x Heavy gauge C19 high-current power cord
Out of stockCable Sleeving (Paracord, 5m, black)
5-metre nylon paracord cable sleeving for DIY custom PSU cables.
Out of stockSanDisk Extreme microSDXC 128 GB (V30 A2)
128 GB V30 A2 UHS-I U3, 190 MB/s read. 4K video recording.
Out of stockSanDisk Extreme microSDXC 512 GB (V30 A2)
512 GB V30 A2, up to 190 MB/s read. Long 4K/8K recording.
Out of stockESD Anti-Static Wrist Strap
Adjustable wrist strap with 1.8 m grounding cord. PC build essential.
2S 4A Type-C Lithium Battery Charging Module – 8.4V Step-Up Boost Charger for 18650 Lipo
[Step UP Buck Converter] 2S 4A Type-C Lithium Battery Charging Module – 8.4V Step-Up Boost Charger for 18650 The 2S 4A Type-C Lithium Battery Charging Module is a compact step-up charging board designed for charging 2-cell series (2S) 18650 Li-ion/Li-Po battery packs. It accepts a 3–6V DC input through USB Type-C and boosts the voltage to 8.4V, the required full-charge voltage for a 2S lithium battery pack. The 4A specification refers to the maximum input current version. According to available product specifications, the corresponding charging current is approximately 2.2A, rather than 4A. ⭐ Key Features Designed for 2S lithium-ion/Li-Po battery packs Suitable for 2 × 18650 cells connected in series USB Type-C input 3–6V DC input Recommended input: 3.7V / 5V Step-up/boost charging circuit 8.4V charging voltage 4A maximum input-current version Approximately 2.2A charging current Automatic recharge function Battery charging protection features Compact PCB design LED charging/status indication Suitable for DIY battery and portable-power projects 📋 Technical Specifications Product Type: 2S Lithium Battery Step-Up Charging Module Battery Configuration: 2S – 2 cells in series Compatible Battery: 3.6V/3.7V Li-ion / Li-Po Nominal Battery Pack Voltage: 7.4V Full-Charge Voltage: 8.4V Input Voltage: DC 3–6V Recommended Input: DC 3.7V / 5V Maximum Input Current: 4A Charging Current: Approximately 2.2A Charging Interface: USB Type-C Charging Mode: Constant-current / constant-voltage Board Size: Approximately 39 × 18 × 6.3mm Operating Temperature: -40°C to +85°C LED Indicators: Charging / fully charged or constant-voltage status 🔋 Charging Performance For the 2S 4A version: USB Type-C 5V → Boost Charging Module → 8.4V → 2S Battery Pack The module draws up to approximately 4A from the input, while the specified charging current is approximately 2.2A. This distinction is important when selecting the USB power adapter. 🔧 Applications 2S 18650 battery packs 7.4V Li-ion battery packs 2S Li-Po battery packs DIY power banks Portable electronics Bluetooth speaker battery systems Robotics projects Solar charging applications Electronic prototyping Portable audio equipment Electric fan projects Type-C rechargeable equipment Custom battery charging systems 🛠️ How It Works The module uses a boost/step-up charging circuit to convert the lower USB Type-C input voltage into the 8.4V charging voltage required for a 2S lithium battery pack. Example: 5V Type-C Input → Step-Up Circuit → 8.4V Charging Output → 2S 18650 Battery A 2S battery pack consists of two lithium cells connected in series: 3.7V + 3.7V = 7.4V nominal4.2V + 4.2V = 8.4V fully charged 💡 LED Indicators The module uses status indicators to show the charging condition: CR: Charging OK: Fully charged / constant-voltage stage ⚠️ Important Notes This module is intended for 2S battery packs only. Do not connect a single 18650 cell directly to the 8.4V charging output. The two cells should be properly matched and in good condition. Do not exceed the 6V maximum input voltage. A suitable Type-C power source is required to supply the necessary input current. The 4A rating is the input-current rating, not the battery charging current. The specified charging current for this 2S 4A version is approximately 2.2A. This charging module should not automatically be considered a replacement for a dedicated 2S BMS/protection board. Use appropriate battery protection where required. Check the PCB polarity and connection markings before connecting the battery. Do not short-circuit the input or output. Use properly matched lithium cells for safe and reliable charging. Keep the module adequately ventilated during higher-current operation. 📦 Package Includes 1 × 2S 4A Type-C Step-Up Boost Lithium Battery Charging Module – 8.4V
UPS Rocker Switch Red 6 Pin ON-OFF-ON with Indicator
[Mechanical Switches] UPS Rocker Switch Red 6 Pin ON-OFF-ON with Indicator – BR34 The UPS Rocker Switch Red 6 Pin ON-OFF-ON with Indicator (BR34) is a durable rocker switch designed for reliable switching applications. It features a 6-pin DPDT configuration, copper contacts and a large rocker design with an indicator light for convenient operation and status indication. With a rated voltage of up to 250V and a rated current of 6A, it is suitable for UPS systems, power strips, stabilizers, water dispensers, coffee machines, automobiles, USB hubs, machinery and other electrical equipment. ⭐ Key Features 6-pin rocker switch ON-OFF-ON switching function DPDT switch configuration Red color Built-in indicator Copper contact construction Illuminated design Large rocker size Rated current up to 6A Rated voltage up to 250V Durable construction Suitable for panel-mount applications Indicator helps provide visual switching/status indication 📋 Technical Specifications Model: BR34 Switch Type: Rocker Switch Switch Function: ON-OFF-ON Number of Pins: 6 Switch Throw Type: DPDT Rated Voltage: 250V Rated Current: 6A Illuminated: Yes / With Indicator Indicator: Built-in indicator Contact Plating: Copper Material: Copper and Iron Color: Red Size: Big Rocker Mechanical Life: Up to 5 years Mounting: Panel Mount Application: Electrical and electronic equipment 🔧 Applications UPS systems Power strips Voltage stabilizers Water dispensers Coffee machines Automobiles USB hubs Electrical machinery DIY electrical projects Control panels Power switching applications 🛠️ Installation Ensure the power supply is switched OFF before installation. Identify the correct terminals according to the required DPDT switching configuration. Connect the wires securely to the appropriate terminals. Ensure the connected load does not exceed the 6A rated current. Mount the switch firmly into the appropriate panel cutout. Verify the indicator wiring and rating before connection. 📦 Package Includes 1 × UPS Rocker Switch Red 6 Pin ON-OFF-ON with Indicator Model: BR34 ⚠️ Precautions Do not exceed the rated 250V / 6A specification. Switch OFF the power supply before installation or wiring. Ensure proper insulation of all electrical connections. Use suitable wiring according to the connected load. Verify the indicator voltage specification before connecting it to the circuit. Verify the pin configuration before connecting the switch. Do not directly connect the indicator to a voltage for which it is not rated.
UPS Rocker Switch Black 6 Pin ON-OFF-ON
[Mechanical Switches] UPS Rocker Switch Black 6 Pin ON-OFF-ON – BR34 The UPS Rocker Switch Black 6 Pin ON-OFF-ON (BR34) is a durable rocker switch designed for reliable switching applications. It features a 6-pin DPDT configuration, copper contacts and a large rocker design for convenient operation. With a rated voltage of up to 250V and a rated current of 6A, it can be used in power strips, stabilizers, water dispensers, coffee machines, automobiles, USB hubs, machinery and other electrical equipment. ⭐ Key Features 6-pin rocker switch ON-OFF-ON switching function DPDT switch configuration Black color Copper contact construction Non-illuminated design Large rocker size Rated current up to 6A Rated voltage up to 250V Durable construction Suitable for panel-mount applications 📋 Technical Specifications Model: BR34 Switch Type: Rocker Switch Switch Function: ON-OFF-ON Number of Pins: 6 Switch Throw Type: DPDT Rated Voltage: 250V Rated Current: 6A Illuminated: No / Non-Illuminated Contact Plating: Copper Material: Copper and Iron Color: Black Size: Big Rocker Mechanical Life: Up to 5 years Mounting: Panel Mount Application: Electrical and electronic equipment 🔧 Applications UPS systems Power strips Voltage stabilizers Water dispensers Coffee machines Automobiles USB hubs Electrical machinery DIY electrical projects Control panels Power switching applications 🛠️ Installation Ensure the power supply is switched OFF before installation. Identify the correct terminals according to the required DPDT switching configuration. Connect the wires securely to the appropriate terminals. Ensure the connected load does not exceed the 6A rated current. Mount the switch firmly into the appropriate panel cutout. 📦 Package Includes 1 × UPS Rocker Switch Black 6 Pin ON-OFF-ON ⚠️ Precautions Do not exceed the rated 250V / 6A specification. Switch OFF the power supply before installation or wiring. Ensure proper insulation of all electrical connections. Use suitable wiring according to the connected load. This is a non-illuminated switch. Verify the pin configuration before connecting the switch to your circuit.
KWS-MX18 10-in-1 USB Tester Digital LCD Voltage, Current & Power Meter
[Ammeter and Voltmeter] KWS-MX18 10-in-1 USB Tester – Digital LCD Voltage, Current & Power Meter The KWS-MX18 10-in-1 USB Tester is a compact multifunction digital testing instrument designed for monitoring and evaluating USB chargers, power banks, USB ports, mobile charging systems, and other DC power sources. It provides real-time measurement of voltage, current, power, capacity, energy, charging time, resistance, and internal temperature on its digital display. The tester supports a DC voltage range of 4–30V and current measurement up to approximately 5.1A, with power measurement up to 150W. It also provides capacity and energy monitoring, making it useful for checking the actual charging performance and capacity of USB power supplies and power banks. ⭐ Key Features 10-in-1 multifunction USB tester Digital LCD display Real-time voltage and current monitoring Measures power consumption Measures accumulated charging capacity Measures energy consumption Charging time measurement Charging resistance measurement Internal temperature measurement Positive and negative voltage measurement Stores measurement data in 9 groups Power-off memory function Compact and lightweight design Suitable for USB charger and power-bank testing Supports QC2.0 / QC3.0 according to available product information 📋 Technical Specifications Product Type: 10-in-1 USB Digital Tester Model: KWS-MX18 Input Voltage Range: DC 4–30V Current Measurement: 0–5.1A Power Measurement: 0–150W Capacity Measurement: 0–999999mAh Energy Measurement: 0–999999mWh Timing Range: 0–99 Hours Charging Resistance: 0–999.9Ω Internal Temperature: 0–80°C Positive Voltage Measurement: 0–10V Negative Voltage Measurement: 0–10V Memory Groups: 1–9 Display: Digital LCD Material: ABS Dimensions: Approximately 56.6 × 24.7 × 11.2mm Weight: Approximately 13.9g Input Connector: USB Output Connector: USB Function Button: Yes 🔍 10 Measurement Functions Voltage: 4–30V DC Current: 0–5.1A Power: 0–150W Capacity: 0–999999mAh Energy: 0–999999mWh Charging Time: 0–99 hours Charging Resistance: 0–999.9Ω Positive Voltage: 0–10V Negative Voltage: 0–10V Internal Temperature: 0–80°C 💾 Memory Function The KWS-MX18 can store charging measurement information in 9 separate memory groups. This allows you to compare charging capacity and energy measurements from different chargers or devices. The stored data can be viewed using the function button, and an individual memory group can be cleared by holding the button for approximately 3 seconds. 🔘 Button Functions Single Press: View stored measurement data from memory groups 1–9. Long Press: Clear the currently selected memory group. Double Press: Change the display page. Calibration: The device supports voltage and current calibration according to the supplied manual. 🔌 Applications USB Charger Testing Mobile Charger Testing Power Bank Testing USB Port Testing Mobile Phone Charging Analysis USB Cable Testing Power Supply Monitoring DC Power Measurement Electronics Troubleshooting DIY Electronics Projects Charger Performance Testing Battery Charging Analysis 🛠️ How to Use Connect the KWS-MX18 in-line between the USB power source and the USB-powered device. Once powered, the LCD displays the measured electrical parameters. You can use the function button to change display pages and access stored measurement data. It is particularly useful for comparing chargers, power banks, cables, and USB ports by monitoring actual voltage, current, power, capacity, and energy delivered. 📦 Package Includes 1 × KWS-MX18 10-in-1 USB Digital Tester ⚠️ Color Note: Color: White / Black Color will be shipped depending on stock availability. Any one color (White or Black) may be shipped based on available stock. Specific color cannot be guaranteed. ⚠️ Precautions Do not exceed the specified 30V DC input voltage. Do not exceed the specified current measurement range. Ensure correct USB connection direction before use. Keep the tester away from water and excessive moisture. Do not use it for measuring mains AC voltage. The device is intended for DC/USB power measurement. Actual measurement accuracy can depend on the connected source, load, cable, and operating conditions.
Almirah Wardrobe Switch – 250V AC 6A Momentary Push-to-Off Switch
[Mechanical Switches] Almirah Wardrobe Switch – 250V AC 6A Momentary Push-to-Off Switch The Almirah Switch is a compact single-pole momentary push-to-off switch designed for use in almirahs, cupboards, wardrobes, cabinets, and furniture lighting applications. It provides instantaneous switching action and is suitable for applications where an electrical circuit needs to be switched according to the opening or closing of a cabinet or door. The switch features a high-grade polycarbonate body and brass contacts, providing reliable electrical conduction and durability for regular use. Its compact design is intended to fit standard almirah cutouts and supports panel or surface mounting with screw-type wire terminals. With a rating of 250V AC and 6A, an IP20 protection level, and a mechanical life of more than 10,000 operations, this switch is suitable for indoor furniture and cabinet applications. ⭐ Key Features 250V AC rated voltage 6A current rating Single-pole design Momentary push-button operation Push-to-Off action Instantaneous response High-grade polycarbonate construction Brass electrical contacts Compact design for standard almirah cutouts Panel or surface mounting Screw-type wire terminals Glossy white finish Mechanical life of >10,000 operations IP20 protection RoHS compliant 📋 Technical Specifications Product Type: Almirah Switch Switch Type: Momentary Actuator Type: Push Button Circuit Type: Single Circuit Number of Poles: Single Pole Rated Voltage: 250V AC Maximum Voltage: 250V AC Current Rating: 6A Maximum Current: 6A Response Time: Instantaneous Automation Grade: Manual Material: High-Grade Polycarbonate Contact Material: Brass Wire Terminal: Screw-Type Mounting Type: Panel / Surface Mount Protection Level: IP20 Finish Type: Glossy Color: White Operating Temperature: -10°C to +50°C Temperature Range: -10°C to +50°C Mechanical Life: >10,000 Operations Insulation Resistance: 100MΩ Minimum @ 500V DC Contact Resistance: 50mΩ Stroke: Standard Push-to-Off Action Size: Compact; fits standard almirah cutout Weight: Approximately 20g Number of Modules: Single Module UV Stabilized: Normal RoHS Compliance: Yes 🔌 Operation The switch provides a push-to-off momentary action. It is designed for applications where the switch operates automatically through the physical movement of a cupboard, wardrobe, almirah, or cabinet door. 🔧 Applications Almirah Lighting Cupboard Lighting Wardrobe Lighting Cabinet Lighting Furniture Lighting Storage Cabinet Applications Office Cabinets Home Furniture Control Panels Indoor Electrical Applications 🛠️ Installation The switch can be installed using its panel or surface mounting arrangement. Fit the switch into a suitable cutout and secure it firmly. Connect the wires to the screw-type terminals with the power supply switched off during installation. 📦 Package Includes 1 × Almirah Switch – White, 250V AC 6A ⚠️ Precautions Disconnect the power supply before installation or wiring. Do not exceed the 250V AC / 6A rating. Ensure screw terminals are tightened securely. Use suitable wiring for the connected load. Intended primarily for indoor applications. IP20 protection does not provide waterproof protection. Do not use in wet or exposed outdoor environments. Replace the switch if contacts become damaged or operation becomes unreliable. ❓ Frequently Asked Questions Q: What is the voltage and current rating?A: The switch is rated for 250V AC and 6A. Q: What type of switch is it?A: It is a single-pole momentary push-to-off switch. Q: Where can it be installed?A: It is designed for almirahs, cupboards, wardrobes, cabinets, and similar furniture applications. Q: What material is used for the switch?A: The body is made from high-grade polycarbonate, with brass contacts. Q: What is the mechanical life?A: The supplied specification states a mechanical life of more than 10,000 operations.
Out of stockGold AP-55 TPA3116D2 2×50W Bluetooth Stereo Digital Amplifier Board with USB, TF Card, FM & Remote
[Amplifier Board] Gold AP-55 TPA3116D2 2×50W Bluetooth Stereo Digital Amplifier Board with USB, TF Card, FM & Remote The Gold AP-55 is a compact Class-D stereo digital audio amplifier board based on the TPA3116D2 amplifier IC, designed for DIY Bluetooth speakers, home audio systems, portable speakers, bookshelf speakers, multimedia systems, and custom audio projects. Available product listings consistently identify the AP-55 as a dual-channel 50W + 50W amplifier, with a DC input range around 8–24V or 12–24V depending on the listing/version. The AP-55 combines the power amplifier with a multimedia player supporting Bluetooth 5.0, USB, TF/SD card, FM radio and AUX input. The Bluetooth device name is reported as GD-82EM, while the FM tuner covers 87.5–108.0MHz. It also includes an infrared remote control and a digital display for convenient operation. The TPA3116D2 Class-D amplifier provides efficient stereo amplification, making the board suitable for building compact but powerful audio systems. One detailed listing specifies support for 4Ω–8Ω speakers, with the commonly advertised maximum output of 50W per channel. ⭐ Key Features Gold AP-55 amplifier module TPA3116D2 Class-D amplifier IC 50W + 50W dual-channel stereo output Supports 4Ω–8Ω speakers Bluetooth 5.0 wireless audio Bluetooth device name: GD-82EM Built-in USB music player Built-in TF / SD card player Built-in FM radio FM frequency range 87.5–108.0MHz 3.5mm AUX input Infrared remote control Digital display Supports MP3 / WMA / WAV Power-off memory function Remembers the previous song and volume Compact design for DIY speaker projects High-efficiency Class-D amplification 📋 Technical Specifications Product Type: Stereo Class-D Digital Amplifier Board Model: Gold AP-55 Amplifier IC: TPA3116D2 Amplifier Class: Class-D Number of Channels: 2 / Stereo Output Power: 50W + 50W Maximum Total Output: 100W Speaker Impedance: 4Ω–8Ω Input Voltage: DC 8–24V (some listings specify 12–24V; verify the exact board version before use) Bluetooth Version: 5.0 Bluetooth Name: GD-82EM Bluetooth Range: Up to approximately 10–15m under suitable conditions Audio Formats: MP3 / WMA / WAV USB Support: Yes TF/SD Card Support: Yes FM Radio: Yes FM Frequency: 87.5–108.0MHz AUX Input: 3.5mm / Wired Audio Input Remote Control: IR Remote Remote Range: Approximately 4–7m Display: Digital Display Power-Off Memory: Yes Memory Function: Last song and volume Audio Input Modes: Bluetooth / USB / TF Card / FM / AUX Output: Dual-Channel Stereo Efficiency: Greater than 90% according to one detailed listing SNR: Approximately 102dB according to one detailed listing Distortion: Below 0.1% at normal listening levels according to one detailed listing Board Size: Approximately 70 × 50 × 20mm with shell, according to one listing 🎵 Audio & Playback Functions The AP-55 can switch between Bluetooth, USB, TF/SD Card, FM Radio and AUX sources. When Bluetooth mode is selected, users can pair a phone or other compatible device with GD-82EM. USB and TF/SD cards can be used for local music playback, while AUX provides a wired audio input. 📻 FM Radio The built-in FM tuner supports the 87.5–108.0MHz broadcast band. FM stations can be searched and selected using the onboard controls or remote control. 🎛️ Controls & Remote The module provides controls for functions such as previous track, next track, volume up, volume down, play/pause, mode selection and FM station selection. The infrared remote provides additional wireless control of playback, volume, mode and other supported functions. 🔧 Applications DIY Bluetooth Speakers High-Power Bluetooth Speaker Projects Portable Speaker Systems Bookshelf Speaker Systems Home Audio Projects Multimedia Speaker Systems USB MP3 Speaker Systems TF/SD Card Music Players FM Radio Speaker Projects Car Audio Projects Custom Wooden Speaker Cabinets Desktop Audio Systems Electronics DIY Projects 🛠️ Installation Connect a suitable DC power supply within the specified voltage range and observe the correct polarity. Connect the left and right speaker outputs to compatible 4Ω–8Ω speakers. Select Bluetooth, USB, TF/SD, FM or AUX according to the desired audio source. For maximum advertised output, a suitable 24V high-current power supply is recommended by one vendor; at lower supply voltages, available output power will be lower. 📦 Package Includes 1 × Gold AP-55 TPA3116D2 2×50W Bluetooth Amplifier Board 1 × IR Remote Control 1 × Required Connecting Wires/Cables (package contents may vary by seller/version) ⚠️ Precautions Verify the exact input voltage requirement of your AP-55 version before powering it. Do not exceed 24V DC where the board specification limits input to 24V. Check power polarity carefully before connection. Use speakers with a compatible 4Ω–8Ω impedance. Do not short-circuit the speaker output terminals. Ensure adequate ventilation during high-power operation. Use a suitable high-current power supply for high-output operation. Do not connect the speaker outputs together or directly to ground. Keep the board away from moisture and conductive materials. Incorrect wiring or excessive voltage can permanently damage the amplifier IC.
16 sq mm Copper Ring Lug Cable Terminal
[Terminal Connector] 16 sq mm Pure Copper Ring Lug Cable Terminal The 16 sq mm Pure Copper Ring Lug Cable Terminal is a high-quality electrical cable lug designed for making secure and reliable connections in high-current electrical systems. Made from pure copper, it provides excellent electrical conductivity and a strong mechanical connection between the cable and the terminal point. The ring lug design allows the terminal to be securely fastened to battery terminals, busbars, studs, bolts, and other electrical connection points. It is suitable for battery packs, inverters, UPS systems, solar installations, automotive wiring, and industrial electrical applications. The compact construction provides a reliable connection while allowing easy installation using a suitable crimping tool. The terminal is ideal for applications where a strong and low-resistance electrical connection is required. ⭐ Key Features Made from pure copper Designed for 16 sq mm cable Ring lug terminal design Excellent electrical conductivity Strong and reliable mechanical connection Suitable for high-current applications Easy bolt and stud mounting Suitable for battery and power wiring Ideal for electrical and DIY applications 📋 Technical Specifications Product Type: Copper Ring Cable Lug Material: Pure Copper Compatible Cable Size: 16 sq mm Terminal Type: Ring Lug Finish: Natural Copper / Tinned, depending on variant Connection Type: Bolt / Stud Mount Application: High-Current Electrical Connections 🔧 Applications Lithium Battery Packs LiFePO₄ Battery Systems Lead-Acid Batteries Inverter Connections UPS Systems Solar Power Systems Automotive Wiring Electrical Panels Power Distribution Industrial Wiring DIY Battery Projects 📦 Package Includes 1 × 16 sq mm Pure Copper Ring Lug Cable Terminal ⚠️ Precautions Select the correct lug according to the 16 sq mm cable size and required mounting hole diameter. Use a suitable cable-lug crimping tool for a secure connection. Ensure the cable is properly inserted and crimped before use. Do not exceed the safe current capacity of the cable and terminal assembly. Ensure all electrical connections are properly insulated and secured.
10-in-1 USB & Type-C Digital Tester – IPS Voltmeter, Ammeter, Impedance & Capacity Meter
[Ammeter and Voltmeter] The 10-in-1 USB & Type-C Digital Power Tester is a multifunction USB measurement instrument developed for engineers, technicians, hobbyists, and electronics enthusiasts. It accurately monitors USB charging performance while providing comprehensive electrical measurements for USB-A and USB Type-C devices. Equipped with a bright IPS true-color LCD display, the tester simultaneously displays ten important charging parameters including Voltage, Current, Power, Capacity (mAh), Energy (mWh), Cable Resistance, Temperature, Charging Time, D+ Voltage, and D− Voltage. The tester features both USB-A and USB Type-C input/output interfaces, allowing compatibility with traditional USB chargers as well as modern USB-C Power Delivery devices. It supports testing of fast chargers, mobile phones, tablets, laptops, power banks, USB cables, and various USB-powered electronics. With support for measurements up to 150W and 5A, this tester is suitable for high-power USB-C PD chargers while consuming less than 20mA of operating current. Built-in control buttons allow users to switch display modes, perform fast-charge diagnostics, and manage measurement functions easily. Its compact design makes it an excellent tool for electronics repair, charger verification, cable testing, battery capacity measurement, laboratory work, and DIY electronics projects. 🔹 Key Features Dual Interface: USB-A & USB Type-C Input/Output Supports USB PD and Fast Charging IPS Full Color LCD Display Measures Voltage, Current and Power Capacity (mAh) & Energy (mWh) Measurement Cable Resistance (Impedance) Measurement Internal Temperature Monitoring USB D+ / D− Voltage Detection Charging Timer Function High Accuracy Measurement Low Self Power Consumption Compact Portable Design Easy Operation with Dedicated Function Buttons 🔹 Technical Specifications Product Type: USB Digital Power Tester Display: IPS True Color LCD Input Interface: USB-A / USB Type-C Output Interface: USB-A / USB Type-C Maximum Power Measurement: 150W Maximum Current: 5A Voltage Measurement: USB Standard & USB-C PD Power Measurement Range: 0–150W Current Measurement: Up to 5A Capacity Measurement: mAh Energy Measurement: mWh Impedance Measurement Range: 1–999.9Ω Temperature Measurement: 0°C to 80°C USB D+ Voltage Range: 0–2.99V USB D− Voltage Range: 0–2.99V Timer Range: 999 Hours 59 Minutes Refresh Rate: Approximately 500ms Self Power Consumption: <20mA Operating Buttons: Mode / Power Dimensions: 76.9 × 38 × 11 mm 🔹 Applications This USB tester is suitable for: USB charger testing USB-C PD charger testing Power bank capacity testing Mobile charger verification Fast charging protocol diagnostics USB cable resistance testing Laptop USB-C charger testing Electronics repair DIY electronics projects Laboratory measurements Battery charging analysis Quality inspection of USB power supplies 🔹 Package Includes 1 × 10-in-1 USB & Type-C Digital Power Tester 🔹 Frequently Asked Questions (FAQ) What does "10-in-1" mean? It measures ten important parameters: Voltage, Current, Power, Capacity, Energy, Impedance, Temperature, Charging Time, D+ Voltage, and D− Voltage. Does it support both USB-A and USB Type-C? Yes. It features both USB-A and USB Type-C input and output interfaces. What is the maximum power it can measure? Up to 150W. What is the maximum current supported? Up to 5A. Can it test USB-C laptop chargers? Yes. It supports high-power USB-C PD chargers up to 150W. Can it measure charging cable quality? Yes. It measures cable impedance from 1Ω to 999.9Ω. Does it display temperature? Yes. It includes an internal temperature sensor with a range of 0°C to 80°C. Does it require batteries? No. It is powered directly from the connected USB source. Can it measure power bank capacity? Yes. It records charging capacity in mAh and mWh. Does it support fast charging protocols? Yes. It can monitor USB D+ and D− voltages, helping identify fast charging protocol handshakes.
220-240V AC Swing Motor Gear Motor for Air Cooler Synchronous Motor
[AC Motor] The 220-240V AC Swing Motor Gear Motor is a compact synchronous motor specially designed for air cooler oscillation and swing movement applications. It delivers smooth and stable low-speed rotation, making it ideal for automatic airflow control systems. In addition, the motor operates directly on standard 220-240V AC power, eliminating the need for external driver circuits. As a result, it can be easily integrated into household appliances and industrial cooling equipment. Because of its synchronous motor design, the motor maintains stable rotational speed based on the AC supply frequency. Furthermore, the built-in gear reduction mechanism provides controlled torque and smooth swing movement with low noise operation. The motor is designed for continuous duty applications and features low power consumption with reliable long-term performance. Moreover, the compact body and screw-mount design allow quick installation and easy replacement in air coolers and oscillation systems. This synchronous swing motor is widely used in air coolers, ventilation systems, oscillating fans, automation projects, and household appliances. 🔹 Key Features Designed for air cooler swing operation Operates directly on 220-240V AC supply Smooth synchronous gear motor operation Stable low-speed rotation Low noise and low power consumption Compact and lightweight construction Durable internal gear mechanism Suitable for continuous operation 🔹 Technical Specifications Product Type: AC Synchronous Swing Motor Motor Type: Gear Reduction Synchronous Motor Operating Voltage: 220V–240V AC Rated Frequency: 50/60Hz Rotation Speed: Typically 4–6 RPM (depends on model) Power Consumption: Approx. 4W–5W Rotation Direction: CW / CCW Gear Mechanism: Internal Reduction Gear Shaft Type: Metal Round-Shaft Mounting Type: Screw Mount Insulation Class: Class E Body Material: Metal + Plastic Operating Temperature: -10°C to +55°C Noise Level: Low Noise Operation Duty Cycle: Continuous Duty Application Type: Swing / Oscillation Mechanism 🔹 Working Principle This motor works using synchronous AC motor technology, where the rotor rotates according to the AC supply frequency. The internal reduction gears decrease the motor speed while increasing torque, allowing smooth and controlled oscillation movement. 🔹 Applications This swing motor is suitable for many electrical and mechanical applications, including: Air coolers Oscillating fans Ventilation systems Swing control mechanisms Household appliances Automation systems DIY electronics projects 🔹 Package Includes 1 × 220-240V AC Swing Motor Gear Motor
704060 3.7V 2000mAh LiPo Battery | Rechargeable Lithium Polymer Battery with BMS
[LiPo Cell] The 704060 3.7V 2000mAh Lithium Polymer Battery is a compact, high-capacity rechargeable LiPo battery designed for portable electronic devices. With a nominal voltage of 3.7V and a capacity of 2000mAh, it provides reliable and long-lasting power for small electronics and DIY projects. This battery includes a built-in protection circuit (PCM) that helps prevent overcharging, over-discharging, and short circuits, ensuring safer operation and longer battery life. Its slim pouch design makes it ideal for space-constrained applications such as Bluetooth speakers, GPS trackers, mini cameras, and wearable devices. 🔹 Key Features High capacity 2000mAh LiPo battery Nominal voltage 3.7V Built-in PCM protection circuit Lightweight and compact pouch design Stable discharge performance Long service life Suitable for portable electronic devices 🔹 Technical Specifications Parameter Specification Model 704060 Battery Type Lithium Polymer (LiPo) Nominal Voltage 3.7V Fully Charged Voltage 4.2V Capacity 2000mAh Dimensions 60 × 40 × 7 mm Length 60 mm Width 40 mm Thickness 7 mm Protection Built-in PCM protection board Rechargeable Yes 🔹 Applications Bluetooth speakers MP3 / MP4 players Mini cameras GPS trackers Vehicle data recorders IoT devices Portable electronics DIY electronics projects 🔹 Package Includes 1 × 704060 3.7V 2000mAh Lithium Polymer Rechargeable Battery ⚠ Battery color and label may vary depending on batch. ⚠ Safety Instructions Do not short circuit the battery terminals. Do not charge above 4.2V. Do not discharge below 3.0V. Use a LiPo compatible charger. Do not puncture, crush, or expose battery to fire. Do not charge unattended. Store in a cool and dry place.
2S 20A 7.4V / 8.4V 18650 Lithium Battery Protection Board with Balance
[Li-ion Rechargeable Battery Charger, Lithium Battery Protection Board] The 2S 7.4V / 8.4V 20A Lithium Battery Protection Board with Balancing is a compact and reliable Battery Management System (BMS) designed for 2-cell (2S) 18650 lithium-ion battery packs. This board provides complete protection and automatic cell balancing to ensure safe charging, stable discharging, and long battery life. With a nominal output of 7.4V and a full charge voltage of 8.4V, this protection board supports continuous current up to 20A, making it suitable for medium-power applications such as DIY battery packs, portable power tools, robotics, LED systems, solar projects, and backup power supplies. The built-in balancing function equalizes the voltage between both cells during charging, preventing overcharging of individual cells and improving overall pack efficiency and lifespan. Multiple protection features including over-charge, over-discharge, over-current, and short-circuit protection ensure maximum safety during operation. Compact in size and easy to wire, this BMS is ideal for both DIY users and professional battery pack manufacturers. ⭐ KEY FEATURES ✔ Designed for 2S (2-cell) 18650 lithium battery packs✔ 20A continuous discharge current support✔ Built-in cell balancing function✔ Protection against over-charge, over-discharge, over-current & short circuit✔ Improves battery safety, performance & lifespan✔ Compact PCB – easy to integrate✔ Ideal for DIY & professional battery pack builds 🔧 TECHNICAL SPECIFICATIONS Battery Configuration: 2S (2 cells in series) Nominal Voltage: 7.4V Full Charge Voltage: 8.4V Maximum Continuous Current: 20A Battery Type: 3.7V Li-ion (18650 rechargeable cells) Balancing Function: Yes (automatic during charging) Protection Functions: Over-charge protection Over-discharge protection Over-current protection Short-circuit protection 🔌 WIRING GUIDE – How to Connect 2S Battery Pack 🔹 Board Terminals (Typical Marking) B- → Battery negative (Cell 1 −) B1 → Between Cell 1 & Cell 2 B+ → Battery positive (Cell 2 +) 🔹 Output / Charger Terminals P- → Load / Charger negative P+ → Load / Charger positive (same as B+) 🔧 Connection Steps Connect Cell 1 negative → B- Connect Cell 1 positive / Cell 2 negative → B1 Connect Cell 2 positive → B+ Connect Load & Charger + → P+ (or B+) Connect Load & Charger − → P- ⚠️ Use only matched 18650 cells and an 8.4V Li-ion charger. 🎯 APPLICATIONS DIY lithium battery packs Power tools & cordless devices Robotics & automation projects LED lighting systems Solar battery packs Backup power & portable energy systems 📦 PACKAGE INCLUDES 1 × 2S 20A Lithium Battery Protection Board with Balancing
Nickel Strip 0.12mm × 5mm 1P Plane Coated Nickel Welding Strip for 18650 Lithium Battery Pack – 1 Meter
[Nickel Strip] The Nickel Strip 0.12mm × 5mm 1P Plane Coated Nickel Welding Strip is specially designed for assembling and repairing 18650 lithium battery packs and other rechargeable battery modules. Made from nickel-coated steel, this strip provides a strong mechanical bond, good electrical conductivity, and excellent weldability. Its flat 1P plane design ensures stable current flow and reliable cell connections. The nickel coating protects against rust and corrosion, making it suitable for long-term use in power banks, e-bike battery packs, solar storage systems, UPS batteries, and DIY lithium battery projects. Supplied in a convenient 1 meter length, this strip is easy to cut, bend, and shape according to your battery pack layout. 🔹 Key Features Made from nickel-coated steel for strength and durability Size: 0.12mm thickness × 5mm width Flat 1P plane strip design Good electrical conductivity and strong weld joints Excellent for spot welding lithium battery cells Corrosion-resistant nickel coating Easy to cut, bend, and form Suitable for 18650, 21700, 26650 lithium cells 🔹 Technical Specifications Material: Nickel-coated steel (Coated Nickel) Thickness: 0.12 mm Width: 5 mm Type: 1P Plane Flat Strip Length: 1 Meter Color: Silver Application: Spot welding for lithium battery packs Compatible Cells: 18650, 21700, 26650 and similar cylindrical cells Conductivity: Good Corrosion Resistance: High (nickel-coated surface) 🔹 Applications 18650 lithium battery pack assembly Power bank manufacturing and repair E-bike and electric vehicle battery packs Solar battery storage systems UPS and inverter battery packs DIY lithium battery projects Battery repair and maintenance 🔹 Package Contents 1 × Coated Nickel Welding Strip (0.12mm × 5mm, Length: 1 Meter)
Nickel Strip 0.12mm × 4mm 1P Plane Coated Nickel Welding Strip for 18650 Lithium Battery Pack – 1 Meter
[Nickel Strip] The Nickel Strip 0.12mm × 4mm 1P Plane Coated Nickel Welding Strip is specially designed for assembling and repairing 18650 lithium battery packs and other rechargeable battery modules. Made from nickel-coated steel, this strip provides a strong mechanical bond, good electrical conductivity, and excellent weldability. Its flat 1P plane design ensures stable current flow and reliable cell connections. The nickel coating protects against rust and corrosion, making it suitable for long-term use in power banks, e-bike battery packs, solar storage systems, UPS batteries, and DIY lithium battery projects. Supplied in a convenient 1 meter length, this strip is easy to cut, bend, and shape according to your battery pack layout. 🔹 Key Features Made from nickel-coated steel for strength and durability Size: 0.12mm thickness × 4mm width Flat 1P plane strip design Good electrical conductivity and strong weld joints Excellent for spot welding lithium battery cells Corrosion-resistant nickel coating Easy to cut, bend, and form Suitable for 18650, 21700, 26650 lithium cells 🔹 Technical Specifications Material: Nickel-coated steel (Coated Nickel) Thickness: 0.12 mm Width: 4 mm Type: 1P Plane Flat Strip Length: 1 Meter Color: Silver Application: Spot welding for lithium battery packs Compatible Cells: 18650, 21700, 26650 and similar cylindrical cells Conductivity: Good Corrosion Resistance: High (nickel-coated surface) 🔹 Applications 18650 lithium battery pack assembly Power bank manufacturing and repair E-bike and electric vehicle battery packs Solar battery storage systems UPS and inverter battery packs DIY lithium battery projects Battery repair and maintenance 🔹 Package Contents 1 × Coated Nickel Welding Strip (0.12mm × 4mm, Length: 1 Meter)
Nickel Strip 0.15mm × 6mm 1P Pure Nickel Welding Strip for 18650 Lithium Battery Pack – 1 Meter
[Nickel Strip] The Nickel Strip 0.15mm × 6mm 1P Pure Nickel Welding Strip is specially manufactured for building and repairing 18650 lithium battery packs and other rechargeable battery assemblies. Made from high-purity nickel, this strip offers low electrical resistance, excellent conductivity, and strong spot-welding performance. Its flat 1P plane design ensures uniform current flow and reliable connections between battery cells. The strip is corrosion-resistant and durable, making it ideal for long-term use in power banks, e-bike battery packs, solar storage systems, UPS batteries, and DIY lithium battery projects. Supplied in a convenient 1 meter length, this strip is easy to cut and shape according to your battery pack design. 🔹 Key Features Made from pure nickel (not nickel-plated steel) Size: 0.15mm thickness × 6mm width Flat 1P plane strip for uniform current flow Excellent conductivity with low internal resistance Strong and reliable for spot welding Corrosion-resistant and long-lasting Easy to cut, bend, and shape Perfect for 18650, 21700, 26650 lithium battery packs 🔹 Technical Specifications Material: Pure Nickel Thickness: 0.15 mm Width: 6 mm Type: 1P Plane Flat Strip Length: 1 Meter Color: Silver Application: Spot welding for lithium battery packs Compatible Cells: 18650, 21700, 26650 and similar cylindrical cells Resistance: Very low (high conductivity) Corrosion Resistance: Excellent 🔹 Applications 18650 lithium battery pack assembly Power bank manufacturing and repair E-bike and electric vehicle battery packs Solar battery storage systems UPS and inverter battery packs DIY lithium battery projects Battery repair and maintenance 🔹 Package Contents 1 × Pure Nickel Welding Strip (0.15mm × 6mm, Length: 1 Meter)
Copper Lug 25mm | 25 Sq mm Copper Terminal
[Battery Connector] 25 sq mm Pure Copper Ring Lug Cable Terminal The 25 sq mm Pure Copper Ring Lug Cable Terminal is a high-quality electrical cable lug designed for making secure and reliable cable connections in high-current electrical systems. Made from pure copper, this ring terminal provides excellent electrical conductivity and a strong mechanical connection. The ring-type terminal design allows the lug to be securely fastened to battery terminals, busbars, studs, bolts, and other electrical connection points. It is widely suitable for battery packs, inverters, UPS systems, solar power installations, automotive wiring, and industrial electrical applications. Available in natural copper or tinned finish depending on the variant, the terminal provides reliable performance for power distribution and high-current cable connections. ⭐ Key Features Made from pure copper Designed for 25 sq mm cable Ring lug terminal design Excellent electrical conductivity Strong and reliable mechanical connection Suitable for high-current applications Easy bolt and stud mounting Available in natural copper / tinned finish Suitable for battery and power wiring 📋 Technical Specifications Product Type: Copper Ring Cable Lug Material: Pure Copper Compatible Cable Size: 25 sq mm Terminal Type: Ring Lug Finish: Natural Copper / Tinned, depending on variant Connection Type: Bolt / Stud Mount Application: High-Current Electrical Connections 🔧 Applications Lithium Battery Packs Lead-Acid Batteries LiFePO₄ Battery Systems Inverter Connections UPS Systems Solar Power Systems Automotive Wiring Electrical Panels Power Distribution Industrial Wiring DIY Battery Projects 📦 Package Includes 1 × 25 sq mm Pure Copper Ring Lug Cable Terminal ⚠️ Note Select the correct lug size according to your cable cross-section and mounting stud diameter. Use an appropriate crimping tool to achieve a secure connection. Ensure the cable is properly crimped before connecting to a high-current circuit. Finish may be natural copper or tinned copper depending on the selected variant.
2 x 32140 / 33140 Battery Holder with 33MM Bore Diameter
[Lithium Battery Holder] 32140 / 33140 x 2 Battery Cell Spacer/Holder is a cylindrical battery spacer, made of flame retardant ABS+PC materials, with high-temperature resistance and crack resistance. There are slots on the edge of the holder, that can be combined into many different sizes and shapes of the battery pack; after welding nickel tabs, the pack can pass the vibration test without any other connecting device. Make your battery pack Solid and Reliable! Note!! Every Single battery cell needs 2 Spacers one up and one down buy it accordingly. Features : There are slots on the edge of the holder to combine them into many different sizes and shapes of the battery pack. Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike! Item Type: Battery Holder Model Name 32140 / 33140 radiating battery spacer Material: ABS/PC (Remarkable Flame Retardant Plastic) Bore Diameter [B] (mm) 33MM Application Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike Length (mm): 73 Width (mm): 35 Height (mm): 9mm Shipping Weight 0.008 kg Shipping Dimensions 10 × 7 × 1.5 cm Advantages: Very simple to operation Very flexible, it is easy to assemble any type of battery packs Radiating during high rate discharge. Makes your battery pack Solid and Reliable! Package Includes: 1 x 2 x 32140 / 33140 Battery Holder with 33MM Bore Diameter