All products · 6 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Out of stock803040 3.7V 1000mAh LiPo Battery | Rechargeable Lithium Polymer Battery Cell
[LiPo Cell] The 803040 3.7V 1000mAh Lithium Polymer Battery is a lightweight and compact rechargeable battery designed for portable electronic devices and embedded applications. With a stable 3.7V nominal voltage and 1000mAh capacity, it provides reliable power for IoT projects, DIY electronics, Bluetooth devices, and wearable gadgets. This LiPo battery features a flat pouch design that allows easy integration into compact devices. The high energy density and stable discharge characteristics make it suitable for applications requiring long-lasting power in a small form factor. The battery can be charged using standard LiPo charging modules and provides dependable performance for hobby electronics and portable systems. 🔹 Key Features Nominal Voltage 3.7V Capacity 1000mAh Lightweight and compact pouch design Rechargeable Lithium Polymer battery High energy density Low self-discharge rate Stable discharge performance Suitable for portable electronics 🔹 Technical Specifications Parameter Specification Model 803040 Battery Type Lithium Polymer (LiPo) Nominal Voltage 3.7V Fully Charged Voltage 4.2V Capacity 1000mAh Charging Method CC-CV Discharge Cut-off Voltage 3.0V Cell Type Pouch Cell Rechargeable Yes 🔹 Applications DIY electronics projects IoT devices Bluetooth modules Portable gadgets GPS devices Wearable electronics Robotics projects Power banks 🔹 Package Includes 1 × 803040 3.7V 1000mAh Lithium Polymer Rechargeable Battery ⚠ Battery color and label may vary depending on batch. ⚠ Safety Instructions Do not short circuit the battery terminals. Do not charge above 4.2V. Do not discharge below 3.0V. Use a LiPo compatible charger. Do not puncture or expose to fire. Do not charge unattended. Store in a cool and dry place.
802540P 3.7V 1000mAh Rechargeable Lithium Polymer Battery
[LiPo Cell] The 802540P 3.7V 1000mAh Lithium Polymer Battery Cell is a compact and lightweight rechargeable Li-Po battery designed to deliver reliable and stable power for a wide range of electronic devices. With a nominal voltage of 3.7V and a capacity of 1000mAh, this battery is suitable for DIY electronics, IoT projects, wearable devices, Bluetooth speakers, GPS trackers, power banks, and portable gadgets. Built using high-quality lithium polymer chemistry, the cell provides low internal resistance, stable discharge performance, and long cycle life. Its flat pouch-style design allows easy integration into slim and compact devices where cylindrical batteries cannot be used. The battery can be safely charged using a proper Li-Po charging module (such as TP4056) and should be used with appropriate protection circuitry to prevent overcharge, over-discharge, and short-circuit conditions. ⭐ KEY FEATURES ✔ Nominal Voltage: 3.7V✔ Capacity: 1000mAh✔ Lithium Polymer (Li-Po) Chemistry✔ Rechargeable & Long Cycle Life✔ Slim, lightweight pouch cell design✔ Stable discharge & low self-discharge✔ Ideal for compact & portable devices 🔧 TECHNICAL SPECIFICATIONS Model: 802540P Battery Type: Lithium Polymer (Li-Po) Nominal Voltage: 3.7V Rated Capacity: 1000mAh Charging Voltage: 4.2V (Max) Discharge Cut-off Voltage: ~3.0V Rechargeable: Yes Form Factor: Pouch / Flat Cell 🎯 APPLICATIONS DIY electronics projects IoT & embedded systems Bluetooth speakers & headsets Wearable devices GPS trackers Power banks Portable gadgets 📦 PACKAGE INCLUDES 1 × 802540P 3.7V 1000mAh Lithium Polymer Battery Cell
Out of stock3.7V 1000mAh Li-Po Battery (503035P) – High-Quality Rechargeable Lithium Polymer Single Cell
[LiPo Cell] The 3.7V 1000mAh Lithium Polymer Battery (503035P) is a premium, high-performance rechargeable Li-Po cell designed for compact and portable electronics. Offering stable 3.7V output with excellent energy density, this lightweight battery is perfect for IoT devices, GPS trackers, Bluetooth gadgets, robotics projects, MP3 players, and various DIY electronics. Built using high-quality polymer materials, the 503035P battery ensures long cycle life, steady power delivery, and enhanced safety. With a built-in protection circuit module (PCM), it safeguards against overcharging, over-discharging, and short circuits—making it a reliable and safe power source for modern electronics that demand stability and durability. Whether you’re replacing an old battery or developing a new portable device, this 3.7V 1000mAh Li-Po cell delivers dependable performance in a slim and compact form factor. ✅ Features High-performance 3.7V Li-Po cell with 1000mAh capacity for long-lasting power Compact 503035P form factor perfect for space-restricted designs Stable and reliable voltage output for sensitive electronics Ideal for IoT modules, GPS trackers, Bluetooth gadgets, wearable tech, MP3 players, and DIY electronics High energy density ensures extended device runtime Includes PCM protection for safe operation—overcharge, over-discharge & short-circuit protection Rechargeable with long cycle life, suitable for continuous daily usage Slim, lightweight design for portable and compact devices 📘 Specifications Battery Type: Lithium Polymer (Li-Po) Model Number: 503035P Nominal Voltage: 3.7V Capacity: 1000mAh Charging Voltage: 4.2V Configuration: Single cell Protection Circuit (PCM): Yes Dimensions (Approx): 50mm × 30mm × 3.5mm Energy Density: High Discharge Rate: Suitable for low to medium power applications Rechargeable: Yes – long cycle life Weight: Lightweight Applications: IoT systems, GPS modules, robotics, Bluetooth devices, MP3 players, portable gadgets, DIY electronics Package Includes: 1 x 3.7V 1000mAh Li-Po Battery (503035P) – High-Quality Rechargeable Lithium Polymer Single Cell
Out of stockZB2L3 18650 Li-ion Lithium Lead-acid Battery Capacity Meter Discharge Tester Analyzer
[Battery Capacity Tester] Description: Material: Electrical components Color: See pictures ZB2L3 battery capacity tester discharge type 1.2-12V external load capacity of the battery and other tests 18650 Tools, single-function, by controlling the load off and get real-time integrated discharge current capacity results Maximum support 15V 3A discharged through the discharge voltage and current, itself does not discharge Maximum capacity statistics support 9999Ah (9999000mAh) Automatically identifying and developing appropriate battery termination voltage can also be manually adjusted Specifications: Power supply voltage: DC4.5-6V (micro USB connector) Operating Current: less than 70mA Discharge voltage: 1.00V-15.00V 0.01V resolution Termination voltage range: 0.5-11.0V Supported by current: 3.000A 0.001A resolution Maximum voltage measurement error: 1% + 0.02V Maximum current measurement error: 1.5% + – 0.008A Maximum battery capacity range: 9999Ah (1Ah = 1000mAh) greater value by shifting the decimal point to switch, when the display is less than 10Ah X.XXX, as shown above to achieve 10Ah XX.XX, and so on. Board size: 50mmX37mm Finished Size: 50mmX37mmX17mm (length X width X height maximum position size, contains copper foot height) Instructions: 1. The first test should be a fully charged battery. 2. Connect the battery to be tested positive to positive input, a negative input to the negative, can not be reversed (with load reversal may damage the circuit)! Load connected to the output of the positive and negative output, to work through the tester micro USB power supply (not available desktop or laptop USB powered), then the battery voltage. 3. Direct start test need only one press of the “OK” button, the tester can automatically develop an appropriate termination voltage of the battery full charge voltage, and will start flashing after the test three times. Need to develop artificial termination voltage only when the battery voltage display state by pressing “+” or “-” buttons to modify the termination voltage display beginning with P, behind the representative voltage resolution 0.1V, set up after pressing the “OK “start testing. 4. After the start of the test the tester will control the load of the electronic switch is turned on, the test data shows that the process will release capacity (Ah), current discharge current (A) and battery voltage (V) between the wheel was. When the battery voltage reaches the set cut-off voltage, load control switches off the tester display data stays in capacity (Ah) and above and the corresponding indicator flashes quickly together, now displays the actual capacity of the battery is discharging capacity, about the press “OK” to terminate flashing allows stable data display, press again “OK” button to return to the power-on state can just replace the battery test the next section …… Error codes and their meanings: Err1: battery voltage is above 15V Err2: battery voltage is lower than the termination voltage Err3: Battery can not afford to load or discharge current line too much resistance Err4: overcurrent (current exceeds 3.1A) Err5:Improper use or incorrect wiring has caused the device to be burned out and cannot be used (current sampling or control switch MOS burned out). Note: Use the resistance of the discharge process, resistive load will seriously heat, please pay attention to safety! This circuit voltage in order to improve the measurement accuracy, specially designed DC bias, when the terminal displays nothing then a small voltage does not affect the actual measurement, if you are shorting the input terminals (absolute 0V) will show 0 No retail package Quantity:1Pc Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!! Package Content: 1Pc x battery capacity tester 2Pc x Load resistor Power Battery Capacity Tester LED Display Micro USB Li-ion Lithium 18650 External Load Battery Discharge Testing Analyzer
TP4056 (Micro USB with Current Protection) 1A Li-ion Battery Charging Module
TP4056 1A Li-Ion Lithium Battery charging Module with Current Protection – Micro USB This TP6405 1A Li-Ion Battery Charging Board Micro USB with Current Protection is a tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium-ion (Li-Ion) cells such as 16550s that don't have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished. Furthermore, when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time. USING THE MODULE: Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module Connect cell to charge to B+/B- pads on the right-hand side of the module. A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side Important! Disconnect load when charging The red LED indicates charging in progress, green LED indicates charging has finished. Never charge your battery at a rate greater than 1C. NOTE: 1. Ampere meter can only be connected to a 5v input end of the module. 2. It is better than the charging current is 37% of the battery capacity. If you charge the battery of 1000mAh, a current of 400mAh is enough. 3. The connection wire should not be too thick. 4. Make sure the connect point is good. 5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-subtract the charging current to avoid burn damage to the chip. 6. NO Reverse polarity. You can check our others BMS. Click here Features: Led indicator: red is charging Green is fully charged. Current Protection: Yes Inversed polarity: NO. Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy. Fully machinery automated processing, all patch parts manufacturing.
TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Type C
[Lithium Battery Protection Board] This TP4056 1A Li-Ion Battery Charging Board Type C with Current Protection is a tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium-ion (Li-Ion) cells such as 16550s that don’t have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished. Furthermore, when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time. Manufactured under fully machinery processing. Each module is tested OK before shipment from roboma.in so it has high reliability for the best performance. In conclusion, it is a special design for a single lithium battery charging. TP4056 Other features include the current monitor, under-voltage lockout, automatic recharge, and two status pin to indicate charge termination and the presence of an input voltage. Using the module: Connect Type C cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module Connect cell to charge to B+/B- pads on the right-hand side of the module. A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side Important! Disconnect load when charging The red LED indicates charging in progress, the green LED indicates charging has finished. Never charge your battery at a rate greater than 1C. NOTE: 1. Ampere meter can only be connected to a 5v input end of the module. 2. It is better than the charging current is 37% of the battery capacity. If you charge the battery of 1000mAh, a current of 400mAh is enough. 3. The connection wire should not be too thick. 4. Make sure the connect point is good. 5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-subtract the charging current to avoid burn damage to the chip. 6. NO Reverse polarity. You can check our others BMS. Click here Features : Led indicator: Red is charging Green is fully charged. Current Protection: Yes Inversed polarity: NO. Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy. Fully machinery automated processing, all patch parts manufacturing. Package Includes : 1 x TP4056 1A Li-ion Lithium Battery Charging Module With Current Protection – Type C