All products · 105 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Only 2 leftRobotic Arm Kit
DOF: 3–6 (kit dependent). Actuators: servo motors (SG90/MG90/MG996R class). Control: Arduino/servo driver (PCA9685 common). Supply: 5–6V for servos (separate recommended). Payload: light (50–200g typical for small kits).
Keychron K2 V2 Wireless
75% layout, hot-swappable mechanical, Bluetooth + USB-C. Mac/Win toggle. The thinking developer's daily driver.
Only 2 leftRC Car Kit
Chassis: 2WD/4WD. Motors: TT DC geared motors (3–6V) or higher. Driver: L298N/L293D. Controller: Arduino/ESP32 optional. Remote: IR/2.4GHz/Bluetooth. Power: 2×18650 or 4×AA. Optional ultrasonic/line sensor.
Stepper Motor 28BYJ-48 + ULN2003 Driver
28BYJ-48 ULN2003 5V stepper motor + ULN2003 driver board.
L298P Motor Driver Shield
L298P motor driver shield or relative driver shield.
Only 1 leftPrecision Screwdriver Set (6 piece)
PH0, PH1, flat 1.4/2/2.4/3mm precision screwdriver set.
Razer BlackShark V2 X
Lightweight 240 g esports headset. TriForce 50mm drivers, single 3.5mm cable. Balanced sound for FPS.
Only 2 leftLogitech G PRO X 2 LIGHTSPEED
Wireless tournament-grade headset. Graphene drivers, Blue Voice mic processing, 50-hour battery.
HP Pavilion 15 (Ryzen 5, 16 GB, 512 GB)
15.6" FHD IPS laptop. Ryzen 5 7530U, 16 GB DDR4, 512 GB NVMe. Daily driver for office + light editing.
Out of stockHyperX Cloud III Wired
53mm angled drivers, memory foam cups, detachable USB-C / 3.5 mm mic.
Out of stockHyperX Cloud Alpha Wireless
300-hour battery wireless gaming headset. 50mm dual-chamber drivers.
Out of stockLogitech G PRO X 2 LIGHTSPEED Wireless
50mm graphene drivers, dual-mic, 50-hour battery wireless gaming headset.
Out of stockSennheiser HD 560S Open-back
Audiophile open-back, 38mm drivers, 120 Ω, neutral signature. No mic.
Out of stockRazer BlackShark V2 Pro Wireless
70-hour battery wireless esports headset, TriForce Titanium 50mm drivers.
Out of stockAudio-Technica ATH-M50x
Studio reference closed-back, 45mm large-aperture drivers. Pro mixing standard.
Nextron Nforce AMD Radeon RX 580 8GB GDDR5 Graphics Card
[Graphics Card] Nextron Nforce AMD Radeon RX 580 8GB GDDR5 Dual Fan Gaming Graphics Card The Nextron Nforce RX 580 8GB delivers responsive, fluid 1080p gaming performance powered by AMD Polaris architecture. Equipped with 8GB of high-speed GDDR5 memory and a dual-fan thermal cooling solution with copper heat pipes. ⭐ Key Features - High-capacity 8GB GDDR5 video memory with 256-bit bus width - Dual 90mm cooling fans with multi-rib heat dissipation - Dual slot aerodynamic shroud design - AMD FreeSync technology support for tear-free gaming - DirectX 12 and Vulkan API hardware acceleration - Multiple display connectivity with HDMI, DisplayPort, and DVI-D 📋 Technical Specifications - GPU Engine: AMD Radeon RX 580 (Polaris 20) - Stream Processors: 2048 Cores - Core Clock: Up to 1284 MHz - Memory Clock: 7000 MHz effective - Memory Interface: 256-bit GDDR5 - Bus Type: PCI-Express 3.0 x16 - Video Outputs: 1x HDMI 2.0b, 3x DisplayPort 1.4, 1x Dual-Link DVI-D - Thermal Design Power (TDP): 150W - Power Connector: 1x 8-Pin PCIe - Recommended Power Supply: 450W minimum 🎯 Applications - Budget 1080p gaming (CS2, GTA V, Valorant, Apex Legends, Fortnite) - Multi-monitor workstation setups for trading and productivity - Affordable 3D rendering and graphic design rigs 📦 Package Includes - 1 x Nextron Nforce RX 580 8GB GDDR5 Graphics Card - 1 x Driver CD & Quick Installation Guide
Out of stockiFixit Pro Tech Toolkit (replica)
100-piece precision repair kit — magnetised driver, 64 bits, spudgers, opening picks.
Out of stockPrecision Screwdriver Set 115-in-1
Phone/laptop/console repair kit, 115 bits, magnetic, anti-static tweezers + pry tools.
Out of stockRechargeable Electric Precision Screwdriver
USB-C rechargeable mini electric driver, 24 bits, torque-controlled. Phone repair.
Out of stock0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306
[LED/LCD Display] 0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306 The 0.96-inch Blue OLED Display Module is a compact graphical display based on the SSD1306 driver IC, featuring a 128×64 pixel resolution and blue monochrome display. This version has a 7-pin interface with a dedicated CS (Chip Select) pin, making it suitable for 4-wire SPI communication. The module is factory-configured for SPI and can also be modified for I2C/IIC communication on compatible board versions. With its compact size, wide viewing angle and low-power OLED technology, it is suitable for Arduino, ESP32, ESP8266, STM32, Raspberry Pi and other microcontroller projects. ⭐ Key Features 0.96-inch blue OLED display 128 × 64 pixel resolution SSD1306 driver IC 7-pin interface Dedicated CS (Chip Select) pin Factory configured for 4-wire SPI Supports SPI and I2C/IIC with appropriate configuration 3.3V/5V compatible on supported module versions No backlight required Low power consumption Wide viewing angle of more than 160° Compact PCB design Pre-soldered 7-pin male header Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi projects 📋 Technical Specifications Display Type: OLED (Organic Light-Emitting Diode) Display Colour: Blue Display Size: 0.96 inch Driver IC: SSD1306 Resolution: 128 × 64 pixels Interface: SPI / I2C Default Interface: 4-wire SPI Input Voltage: 3.3V–5V Viewing Angle: >160° Module Dimensions: Approximately 27 × 27 × 4mm Operating Temperature: Approximately -30°C to +70°C Header: 7-pin male header, pre-soldered Display Type: Monochrome blue OLED 🔌 7-Pin Interface The 7-pin version provides the following connections: GND – Ground VCC – Power supply D0 / SCK / CLK – SPI clock D1 / MOSI / SDA – SPI data RES / RST – Display reset DC / A0 – Data/Command selection CS – Chip Select 🛠️ SPI Connection The module is normally supplied in 4-wire SPI configuration. For an Arduino Uno, a typical connection is: VCC → 5V GND → GND D0 → SCK / D13 D1 → MOSI / D11 RES → Digital I/O DC → Digital I/O CS → Digital I/O The dedicated CS pin allows the OLED to share the SPI bus with other devices such as SD cards or additional SPI peripherals. 🔄 I2C / IIC Configuration On compatible versions, the module can be converted from SPI to I2C by changing the appropriate resistor configuration on the PCB. The supplied board configuration may require: Moving the resistor from R3 to R1 Shorting R8 with solder Using D0 as SCL Using D1 as SDA Configuring DC for the I2C address The exact resistor positions can vary between board revisions, so check the markings on your particular PCB before modification. 🎯 Applications Arduino projects ESP32 projects ESP8266 projects STM32 development Raspberry Pi projects IoT devices Sensor displays Voltage/current meters Battery monitors Temperature displays Digital clocks Data loggers Portable electronic devices Robotics DIY measuring instruments Embedded systems Menu and status displays 💡 Advantages of OLED OLED technology is self-emissive, meaning the pixels produce their own light and do not require a conventional backlight. This provides high contrast, compact construction and a wide viewing angle while keeping power consumption relatively low. ⚠️ Important Notes This is the 7-pin SPI version, not the 6-pin version. The module is normally configured for SPI communication. Check the PCB labels before connecting the module. Do not exceed the specified supply voltage. Although many versions support 5V operation, the exact voltage tolerance can vary between board revisions. I2C operation may require hardware resistor modification. The actual PCB layout and component markings may vary slightly between production batches. Display colour: Blue. Libraries such as Adafruit SSD1306 and U8g2 can be used with compatible microcontrollers. 📦 Package Includes 1 × 0.96 Inch Blue SPI OLED Display Module
48mm Square Internal Magnet Speaker – 4Ohms 5W
[Speakers] 48mm Square Internal Magnet Speaker – 4Ω 5W The 48mm Square Internal Magnet Speaker is a compact full-range audio driver designed for clear and efficient sound reproduction in space-constrained applications. With a 4Ω impedance and 5W power rating, this speaker is suitable for Bluetooth speakers, portable audio systems, DIY speaker projects and embedded electronic devices. Its square frame allows convenient mounting inside compact enclosures and panels. ⭐ Key Features Compact square speaker design 4Ω impedance 5W power rating Internal magnet construction Full-range audio output Compact size for space-limited applications Easy to install inside speaker enclosures Suitable for DIY and commercial audio projects Lightweight and practical design 📋 Technical Specifications Speaker Type: Internal Magnet Speaker Shape: Square Speaker Size: 48mm class Model: 4Ω 5W Impedance: 4Ω Power Rating: 5W Magnet Type: Internal Magnet Audio Type: Full-range Mounting Type: Panel / Enclosure Mount Dimensions: 47 × 29 × 23mm Application: Compact audio systems, DIY electronics and portable speakers 🔧 Applications Bluetooth speaker systems Portable speakers DIY speaker projects Compact audio enclosures Embedded audio systems Intercom systems Alert and notification devices Educational electronics projects Consumer electronic devices Custom audio projects 🛠️ Installation Connect the speaker to a compatible amplifier with a 4Ω output. Ensure the amplifier's output power is suitable for the speaker's 5W rating. Mount the speaker securely inside the enclosure to reduce unwanted vibration. Observe correct speaker polarity when connecting multiple speakers. 📦 Package Includes 1 × 48mm Square Internal Magnet Speaker Impedance: 4Ω Power: 5W ⚠️ Precautions Do not exceed the 5W rated power for prolonged operation. Use a compatible 4Ω amplifier. Avoid short-circuiting the speaker terminals. Keep away from moisture, excessive heat and physical damage. Ensure proper mounting to minimize vibration and unwanted noise. Actual sound quality depends on the amplifier, enclosure and application.
45mm 1.75-Inch 4Ohms 3W Internal Magnet Speaker with Frame
[Speakers] 45mm Internal Magnet Speaker with Frame – 4Ω 3W 45×23×23mm The 45mm Internal Magnet Speaker with Frame (1.75-Inch) is a compact and efficient audio driver designed for DIY electronics, portable audio devices, multimedia systems, toys, alarms, intercoms, and embedded audio applications. Featuring an internal magnet structure and durable mounting frame, this speaker provides clear and stable sound output while maintaining a compact form factor. With a compact size of 45×23×23mm, 4Ω impedance, and 3W power rating, this speaker is suitable for small amplifier projects and electronic devices where space is limited. Its built-in frame allows convenient installation in custom enclosures, panels, and electronic products. ⭐ Key Features 45mm (1.75-Inch) speaker size 4Ω impedance 3W power rating Internal magnet design Durable mounting frame Compact 45×23×23mm construction Clear and stable sound output Lightweight and space-saving Suitable for low-power audio applications Easy to install in custom enclosures Ideal for DIY, repair and OEM applications 📋 Technical Specifications Product Type: Internal Magnet Speaker Speaker Size: 45mm (1.75 Inch) Dimensions: 45 × 23 × 23mm Impedance: 4Ω Power Rating: 3W Magnet Type: Internal Magnet Frame Type: With Mounting Frame Speaker Type: Dynamic Full Range Speaker Audio Type: Mini Full Range Speaker Mounting: Frame / Panel Mount Application: Compact Audio & Embedded Electronics 🔧 Applications DIY Speaker Projects Portable Audio Devices Bluetooth Speaker Projects Multimedia Speaker Systems Alarm Systems Toys and Sound Modules Intercom Systems Embedded Electronics Educational Electronics Kits Replacement Speaker Repairs Smart Gadgets OEM Product Manufacturing Mini Amplifier Projects 🛠️ Installation Mount the speaker securely inside the required enclosure or panel using its mounting frame. Connect it to a compatible amplifier with an output suitable for 4Ω speakers and a power rating appropriate for the 3W speaker. Proper mounting helps reduce unwanted vibration and improves overall sound performance. 📦 Package Includes 1 × 45mm Internal Magnet Speaker with Frame – 4Ω 3W ⚠️ Precautions Match the 4Ω impedance with the amplifier output. Do not exceed the 3W rated power. Do not apply direct DC voltage to the speaker. Ensure correct wiring polarity during installation. Avoid exposure to moisture and excessive dust. Mount securely to prevent vibration and unwanted noise. Do not apply physical pressure to the speaker cone or diaphragm. Use a compatible audio amplifier module for proper operation.
2 Inch 4 Ohms 5Watt Internal Magnet Speaker with Frame
[Speakers] 2-Inch Internal Magnet Speaker with Frame – 53×29×23mm 4Ω 5W The 2-Inch Internal Magnet Speaker with Frame is a compact and efficient audio driver designed for DIY electronics, portable audio devices, alarms, toys, embedded systems, and other space-constrained applications. Featuring an internal magnet design and durable frame construction, this speaker provides clear and balanced sound output while maintaining a compact footprint. With dimensions of 53×29×23mm, 4Ω impedance, and a 5W power rating, this speaker is suitable for small amplifier projects and electronic devices requiring a compact audio solution. The mounting frame makes installation convenient in custom enclosures and equipment. ⭐ Key Features 2-Inch compact speaker design Internal magnet structure 4Ω impedance 5W power rating Durable metal frame construction Clear and balanced sound output Compact and space-saving design Easy mounting with frame and screw slots Suitable for low and medium-power audio applications Ideal for DIY and OEM applications 📋 Technical Specifications Product Type: Dynamic Internal Magnet Speaker Speaker Size: 2 Inch Dimensions: 53 × 29 × 23mm Impedance: 4Ω Power Rating: 5W Magnet Type: Internal Magnet Magnet Material: Ferrite Shape: Rectangular Frame Type: Metal Frame Cone Material: Paper / Mylar Diaphragm depending on variant Speaker Type: Full Range / Dynamic Speaker Mounting: Frame with Screw Slots Application: Compact Audio & Embedded Electronics 🔧 Applications DIY Speaker Projects Portable Audio Devices Bluetooth Speaker Projects Alarm Systems Toys and Sound Modules Intercom Systems Embedded Electronics Educational Electronics Kits Replacement Speaker Repairs Smart Gadgets OEM Product Manufacturing Mini Amplifier Projects 🛠️ Installation Connect the speaker to a compatible amplifier output matching the speaker's 4Ω impedance and 5W power rating. Secure the speaker firmly using the mounting frame to reduce unwanted vibration and noise during operation. 📦 Package Includes 1 × 2-Inch Internal Magnet Speaker with Frame – 4Ω 5W ⚠️ Precautions Match the 4Ω impedance with the amplifier output. Do not exceed the 5W rated power. Avoid applying direct DC voltage to the speaker. Avoid exposure to moisture and excessive humidity. Mount the speaker securely before operation. Do not apply physical pressure to the speaker cone or diaphragm. Avoid short circuits at the speaker terminals. Keep the speaker away from excessive heat and magnetic interference.