All products · 435 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
ASUS Dual Radeon RX 7600 EVO OC Edition 8GB GDDR6 Graphics Card
[Graphics Card] ASUS Dual Radeon RX 7600 EVO OC Edition 8GB GDDR6 Graphics Card The ASUS Dual Radeon RX 7600 EVO OC Edition combines dynamic thermal performance with broad compatibility. Advanced cooling solutions from flagship graphics cards — including two Axial-tech fans for maximizing airflow to the heatsink — are packed into the 22.8 cm long, 2.5-slot card, delivering more power in less space. ⭐ Key Features - Axial-tech fan design features a smaller fan hub that facilitates longer blades and a barrier ring that increases downward air pressure - 0dB technology lets you enjoy light gaming in relative silence - Dual ball fan bearings can last up to twice as long as sleeve bearing designs - A 2.5-slot design allows for greater build compatibility while maintaining premium cooling - Auto-Extreme precision automated manufacturing for higher reliability - GPU Tweak III software provides intuitive performance tweaking, thermal controls, and system monitoring 📋 Technical Specifications - Graphic Engine: AMD Radeon RX 7600 - Bus Standard: PCI Express 4.0 - OpenGL: OpenGL 4.6 - Video Memory: 8GB GDDR6 - Engine Clock: OC mode up to 2745 MHz (Boost Clock) / 2340 MHz (Game Clock) - Stream Processors: 2048 - Memory Speed: 18 Gbps - Memory Interface: 128-bit - Resolution: Digital Max Resolution 7680 x 4320 - Interface: 1x HDMI 2.1a, 3x DisplayPort 1.4a (HDCP 2.3 Support) - Maximum Display Support: 4 - Recommended PSU: 550W - Power Connectors: 1 x 8-pin - Dimensions: 228 x 123 x 49 mm (2.5 Slot) 🎯 Applications - 1080p and 1440p high-framerate competitive esports and AAA gaming - Content creation with AV1 hardware encoding - Compact Micro-ATX and Mini-ITX small form-factor gaming builds 📦 Package Includes - 1 x ASUS Dual RX 7600 EVO OC 8GB Graphics Card - 1 x Collection Card & Speedsetup Manual
Gigabyte GeForce RTX 5050 Windforce OC 8GB GDDR6 Graphics Card
[Graphics Card] Gigabyte GeForce RTX 5050 Windforce OC 8GB GDDR6 Graphics Card Next-generation GeForce RTX 50 series GPU featuring cutting-edge Blackwell architecture, dedicated ray tracing cores, tensor cores, and DLSS 4 with multi-frame neural reconstruction. The WINDFORCE cooling system features two unique blade fans, alternate spinning, composite copper heat pipes, and 3D active fan functionality. ⭐ Key Features - NVIDIA Blackwell GPU Architecture - 8GB GDDR6 128-bit high-bandwidth memory - WINDFORCE cooling system with alternate spinning fans - Screen cooling extended heatsink allows airflow to pass through - Protection back plate provides structural rigidity and aesthetic polish - Factory Overclocked core clock out of the box 📋 Technical Specifications - Graphic Processor: NVIDIA GeForce RTX 5050 - Memory: 8GB GDDR6 - Memory Bus: 128-bit - PCI Express: PCIe 5.0 x8 / x16 compliant - Outputs: 2x DisplayPort 2.1, 2x HDMI 2.1b - Max Resolution: 7680 x 4320 @ 120Hz - Power Connectors: 1x 8-pin PCIe - Recommended PSU: 500W 🎯 Applications - High-FPS 1080p & 1440p gaming with full Ray Tracing & DLSS - AI model inference, Stable Diffusion, and LLM workstation tasks - Video editing and color grading in DaVinci Resolve & Premiere Pro 📦 Package Includes - 1 x Gigabyte RTX 5050 Windforce OC 8GB Graphics Card - 1 x Quick Start Manual
AMD Ryzen 7 5800X3D Processor 10th Anniversary Edition with Carbice Ice Pad
[Processor] AMD Ryzen 7 5800X3D Processor 10th Anniversary Edition with Carbice Ice Pad The legendary gaming champion for socket AM4, featuring revolutionary AMD 3D V-Cache technology with a massive 96MB of L3 cache. This special 10th Anniversary Edition includes an ultra-high performance Carbice carbon-nanotube thermal Ice Pad for maximum heat transfer. ⭐ Key Features - 8 Cores and 16 Threads powered by Zen 3 architecture - 96MB of 3D V-Cache (100MB Total Cache) - Dramatically boosts gaming frame rates over standard Zen 3 CPUs - Includes authentic Carbice Ice Pad thermal interface material - Drops directly into existing AM4 motherboards with a BIOS update - Unlocked for memory tuning and precision boost undervolting 📋 Technical Specifications - Socket: AM4 - Core Count: 8 - Thread Count: 16 - Base Clock: 3.4 GHz - Boost Clock: Up to 4.5 GHz - L3 Cache: 96 MB - TDP: 105W - PCIe Version: PCIe 4.0 - Memory Support: DDR4-3200 (Supports higher via XMP/DOCP) 🎯 Applications - Ultimate AM4 gaming upgrade without replacing motherboard or RAM - Competitive simulation games (Microsoft Flight Sim, Assetto Corsa, Factorio) - High-FPS competitive esports 📦 Package Includes - 1 x AMD Ryzen 7 5800X3D Processor - 1 x Carbice Ice Pad Thermal Interface - 1 x 10th Anniversary Collector Badge & Certificate
Out of stockNoctua NT-H2 Thermal Paste 3.5 g
Premium hybrid thermal compound. 3.5 g tube — 15+ CPU applications.
Nextron Nforce AMD Radeon RX 580 8GB GDDR5 Graphics Card
[Graphics Card] Nextron Nforce AMD Radeon RX 580 8GB GDDR5 Dual Fan Gaming Graphics Card The Nextron Nforce RX 580 8GB delivers responsive, fluid 1080p gaming performance powered by AMD Polaris architecture. Equipped with 8GB of high-speed GDDR5 memory and a dual-fan thermal cooling solution with copper heat pipes. ⭐ Key Features - High-capacity 8GB GDDR5 video memory with 256-bit bus width - Dual 90mm cooling fans with multi-rib heat dissipation - Dual slot aerodynamic shroud design - AMD FreeSync technology support for tear-free gaming - DirectX 12 and Vulkan API hardware acceleration - Multiple display connectivity with HDMI, DisplayPort, and DVI-D 📋 Technical Specifications - GPU Engine: AMD Radeon RX 580 (Polaris 20) - Stream Processors: 2048 Cores - Core Clock: Up to 1284 MHz - Memory Clock: 7000 MHz effective - Memory Interface: 256-bit GDDR5 - Bus Type: PCI-Express 3.0 x16 - Video Outputs: 1x HDMI 2.0b, 3x DisplayPort 1.4, 1x Dual-Link DVI-D - Thermal Design Power (TDP): 150W - Power Connector: 1x 8-Pin PCIe - Recommended Power Supply: 450W minimum 🎯 Applications - Budget 1080p gaming (CS2, GTA V, Valorant, Apex Legends, Fortnite) - Multi-monitor workstation setups for trading and productivity - Affordable 3D rendering and graphic design rigs 📦 Package Includes - 1 x Nextron Nforce RX 580 8GB GDDR5 Graphics Card - 1 x Driver CD & Quick Installation Guide
Out of stock0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306
[LED/LCD Display] 0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306 The 0.96-inch Blue OLED Display Module is a compact graphical display based on the SSD1306 driver IC, featuring a 128×64 pixel resolution and blue monochrome display. This version has a 7-pin interface with a dedicated CS (Chip Select) pin, making it suitable for 4-wire SPI communication. The module is factory-configured for SPI and can also be modified for I2C/IIC communication on compatible board versions. With its compact size, wide viewing angle and low-power OLED technology, it is suitable for Arduino, ESP32, ESP8266, STM32, Raspberry Pi and other microcontroller projects. ⭐ Key Features 0.96-inch blue OLED display 128 × 64 pixel resolution SSD1306 driver IC 7-pin interface Dedicated CS (Chip Select) pin Factory configured for 4-wire SPI Supports SPI and I2C/IIC with appropriate configuration 3.3V/5V compatible on supported module versions No backlight required Low power consumption Wide viewing angle of more than 160° Compact PCB design Pre-soldered 7-pin male header Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi projects 📋 Technical Specifications Display Type: OLED (Organic Light-Emitting Diode) Display Colour: Blue Display Size: 0.96 inch Driver IC: SSD1306 Resolution: 128 × 64 pixels Interface: SPI / I2C Default Interface: 4-wire SPI Input Voltage: 3.3V–5V Viewing Angle: >160° Module Dimensions: Approximately 27 × 27 × 4mm Operating Temperature: Approximately -30°C to +70°C Header: 7-pin male header, pre-soldered Display Type: Monochrome blue OLED 🔌 7-Pin Interface The 7-pin version provides the following connections: GND – Ground VCC – Power supply D0 / SCK / CLK – SPI clock D1 / MOSI / SDA – SPI data RES / RST – Display reset DC / A0 – Data/Command selection CS – Chip Select 🛠️ SPI Connection The module is normally supplied in 4-wire SPI configuration. For an Arduino Uno, a typical connection is: VCC → 5V GND → GND D0 → SCK / D13 D1 → MOSI / D11 RES → Digital I/O DC → Digital I/O CS → Digital I/O The dedicated CS pin allows the OLED to share the SPI bus with other devices such as SD cards or additional SPI peripherals. 🔄 I2C / IIC Configuration On compatible versions, the module can be converted from SPI to I2C by changing the appropriate resistor configuration on the PCB. The supplied board configuration may require: Moving the resistor from R3 to R1 Shorting R8 with solder Using D0 as SCL Using D1 as SDA Configuring DC for the I2C address The exact resistor positions can vary between board revisions, so check the markings on your particular PCB before modification. 🎯 Applications Arduino projects ESP32 projects ESP8266 projects STM32 development Raspberry Pi projects IoT devices Sensor displays Voltage/current meters Battery monitors Temperature displays Digital clocks Data loggers Portable electronic devices Robotics DIY measuring instruments Embedded systems Menu and status displays 💡 Advantages of OLED OLED technology is self-emissive, meaning the pixels produce their own light and do not require a conventional backlight. This provides high contrast, compact construction and a wide viewing angle while keeping power consumption relatively low. ⚠️ Important Notes This is the 7-pin SPI version, not the 6-pin version. The module is normally configured for SPI communication. Check the PCB labels before connecting the module. Do not exceed the specified supply voltage. Although many versions support 5V operation, the exact voltage tolerance can vary between board revisions. I2C operation may require hardware resistor modification. The actual PCB layout and component markings may vary slightly between production batches. Display colour: Blue. Libraries such as Adafruit SSD1306 and U8g2 can be used with compatible microcontrollers. 📦 Package Includes 1 × 0.96 Inch Blue SPI OLED Display Module
26650 Battery Holder / Battery Spacer 2×1 – 26.3mm Bore Diameter
[Lithium Battery Holder] 26650 Battery Holder / Battery Spacer 2×1 – 26.3mm Bore Diameter The 26650 Battery Holder / Battery Spacer 2×1 is a cylindrical battery spacer designed to securely arrange 26650 lithium-ion battery cells while building multi-cell battery packs. Made from flame-retardant ABS+PC material, it provides a strong and stable structure while allowing air circulation around the cells. The holder features interlocking slots on the edges, allowing multiple spacers to be joined together to create different battery-pack sizes and configurations. After welding nickel strips, the assembled battery pack can achieve a solid and reliable structure without requiring additional connecting hardware. ⭐ Key Features Designed for 26650 cylindrical lithium-ion cells 2 × 1 configuration 26.3mm bore diameter Made from flame-retardant ABS+PC material High-temperature resistant construction Crack-resistant design Interlocking slots for connecting multiple spacers Allows flexible battery-pack configurations Provides mechanical support for battery cells Helps maintain proper spacing between cells Suitable for high-current battery-pack construction Helps improve battery-pack stability and reliability Allows airflow around the cells for heat dissipation 📋 Technical Specifications Product Type: Battery Holder / Battery Spacer Compatible Cell: 26650 cylindrical battery Configuration: 2 × 1 Number of Cells: 2 Bore Diameter: 26.3mm Material: Flame-retardant ABS+PC Construction: Interlocking modular design Mounting: Multiple spacers can be joined together Application: Lithium battery pack assembly Cell Type: Cylindrical Li-ion cells 🔧 Applications 26650 lithium-ion battery packs E-bike battery packs Electric scooter battery packs Electric vehicle battery packs Power-tool battery packs DIY high-current battery packs UPS battery systems Solar energy storage packs Portable power stations Robotics battery packs Custom lithium battery assemblies 🛠️ How to Use The spacer is designed to hold two 26650 cells in a 2×1 arrangement. Multiple spacers can be connected through the slots provided around the edges to create larger battery-pack configurations. For a complete battery pack: Cell → Spacer → Nickel Strip Welding → Additional Spacers → Battery Pack For mechanical support, spacers can be positioned at the top and bottom of the cells. Important: For each individual battery cell, 2 spacers are recommended—one at the top and one at the bottom. 💡 Advantages Simple Assembly: Easy to arrange cylindrical cells. Flexible Design: Multiple spacers can be interconnected to create different pack shapes. Strong Construction: Helps keep cells firmly positioned. Heat Dissipation: Provides spacing between cells and allows airflow. Reliable Battery Pack: Helps make the completed pack mechanically stable. Suitable for Complex Packs: Useful for custom battery configurations, including e-bike and high-current applications. ⚠️ Important Notes This product is only a battery holder/spacer; batteries are not included. The 26.3mm bore is intended for compatible 26650 cells. Check your actual cell diameter before purchase. Do not force oversized cells into the holder. Battery cells should be properly insulated and securely assembled. Use suitable nickel strip and an appropriate spot-welding method. Use a suitable BMS/protection system for the completed lithium battery pack. Battery cells should be properly matched before assembling a multi-cell pack. 2 spacers are recommended per individual cell, one on each end. Keep the battery assembly away from excessive heat, moisture and physical damage. 📦 Package Includes 1 × 26650 Battery Holder / Battery Spacer – 2×1, 26.3mm Bore Diameter Note: Battery cells, nickel strips and BMS are not included.
2S 4A Type-C Lithium Battery Charging Module – 8.4V Step-Up Boost Charger for 18650 Lipo
[Step UP Buck Converter] 2S 4A Type-C Lithium Battery Charging Module – 8.4V Step-Up Boost Charger for 18650 The 2S 4A Type-C Lithium Battery Charging Module is a compact step-up charging board designed for charging 2-cell series (2S) 18650 Li-ion/Li-Po battery packs. It accepts a 3–6V DC input through USB Type-C and boosts the voltage to 8.4V, the required full-charge voltage for a 2S lithium battery pack. The 4A specification refers to the maximum input current version. According to available product specifications, the corresponding charging current is approximately 2.2A, rather than 4A. ⭐ Key Features Designed for 2S lithium-ion/Li-Po battery packs Suitable for 2 × 18650 cells connected in series USB Type-C input 3–6V DC input Recommended input: 3.7V / 5V Step-up/boost charging circuit 8.4V charging voltage 4A maximum input-current version Approximately 2.2A charging current Automatic recharge function Battery charging protection features Compact PCB design LED charging/status indication Suitable for DIY battery and portable-power projects 📋 Technical Specifications Product Type: 2S Lithium Battery Step-Up Charging Module Battery Configuration: 2S – 2 cells in series Compatible Battery: 3.6V/3.7V Li-ion / Li-Po Nominal Battery Pack Voltage: 7.4V Full-Charge Voltage: 8.4V Input Voltage: DC 3–6V Recommended Input: DC 3.7V / 5V Maximum Input Current: 4A Charging Current: Approximately 2.2A Charging Interface: USB Type-C Charging Mode: Constant-current / constant-voltage Board Size: Approximately 39 × 18 × 6.3mm Operating Temperature: -40°C to +85°C LED Indicators: Charging / fully charged or constant-voltage status 🔋 Charging Performance For the 2S 4A version: USB Type-C 5V → Boost Charging Module → 8.4V → 2S Battery Pack The module draws up to approximately 4A from the input, while the specified charging current is approximately 2.2A. This distinction is important when selecting the USB power adapter. 🔧 Applications 2S 18650 battery packs 7.4V Li-ion battery packs 2S Li-Po battery packs DIY power banks Portable electronics Bluetooth speaker battery systems Robotics projects Solar charging applications Electronic prototyping Portable audio equipment Electric fan projects Type-C rechargeable equipment Custom battery charging systems 🛠️ How It Works The module uses a boost/step-up charging circuit to convert the lower USB Type-C input voltage into the 8.4V charging voltage required for a 2S lithium battery pack. Example: 5V Type-C Input → Step-Up Circuit → 8.4V Charging Output → 2S 18650 Battery A 2S battery pack consists of two lithium cells connected in series: 3.7V + 3.7V = 7.4V nominal4.2V + 4.2V = 8.4V fully charged 💡 LED Indicators The module uses status indicators to show the charging condition: CR: Charging OK: Fully charged / constant-voltage stage ⚠️ Important Notes This module is intended for 2S battery packs only. Do not connect a single 18650 cell directly to the 8.4V charging output. The two cells should be properly matched and in good condition. Do not exceed the 6V maximum input voltage. A suitable Type-C power source is required to supply the necessary input current. The 4A rating is the input-current rating, not the battery charging current. The specified charging current for this 2S 4A version is approximately 2.2A. This charging module should not automatically be considered a replacement for a dedicated 2S BMS/protection board. Use appropriate battery protection where required. Check the PCB polarity and connection markings before connecting the battery. Do not short-circuit the input or output. Use properly matched lithium cells for safe and reliable charging. Keep the module adequately ventilated during higher-current operation. 📦 Package Includes 1 × 2S 4A Type-C Step-Up Boost Lithium Battery Charging Module – 8.4V
Type-C PD/QC/AFC Fast Charge Decoy Trigger Module – 5V/9V/12V/15V/20V Fixed Output
[Step UP Buck Converter] Type-C PD/QC/AFC Fast Charge Decoy Trigger Module – 5V/9V/12V/15V/20V Fixed Output The Type-C PD/QC/AFC Fast Charge Decoy Trigger Module is a compact USB Type-C power negotiation module designed to request a selected voltage from compatible USB Type-C fast chargers and power banks. It supports QC 2.0/3.0, AFC, PD 2.0 and PD 3.0 protocols, allowing compatible USB-C power sources to provide higher voltage outputs such as 5V, 9V, 12V, 15V or 20V. This module is useful for DIY electronics projects where a USB Type-C PD/QC charger needs to be used as a DC power source for equipment that does not have native USB-C fast-charging support. ⭐ Key Features USB Type-C fast-charge decoy/trigger module Supports PD 2.0 / PD 3.0 Supports QC 2.0 / QC 3.0 Supports Samsung AFC Fixed selectable voltage output Supports 5V / 9V / 12V / 15V / 20V output options Negotiates the required voltage from a compatible charger Suitable for USB-C power banks and PD adapters LED indicators for operating/status indication Compact and lightweight PCB design Useful for DIY power supply and electronics projects Plug-and-play operation with compatible USB-C power sources 📋 Technical Specifications Product Type: USB Type-C Fast Charge Trigger / Decoy Module Input Connector: USB Type-C Input Source: USB-C PD/QC/AFC compatible charger or power bank Supported Protocols: PD2.0, PD3.0, QC2.0, QC3.0, AFC Output Voltage: 5V / 9V / 12V / 15V / 20V Output Type: DC Voltage Selection: Fixed/selectable depending on module version Indicator: LED status indicators Application: DC power conversion and fast-charge voltage triggering 🔧 Applications Converting USB-C PD chargers into DC power supplies Powering DIY electronics projects Arduino and microcontroller projects LED applications Portable electronic equipment DIY laboratory power supplies DC motors and other suitable loads Router/modem power applications where the required voltage matches Powering electronics from USB-C PD power banks Replacing conventional DC adapters with USB-C PD sources 🛠️ How It Works The module does not boost the USB voltage itself. Instead, it communicates with a compatible USB-C power source and sends the required PD/QC/AFC negotiation request. For example, when connected to a compatible PD charger, the module can request: 5V → 9V → 12V → 15V → 20V The charger then provides the negotiated voltage at the module's DC output. ⚠️ Important Notes The connected USB-C charger or power bank must support the required fast-charging protocol and voltage. A standard 5V-only USB charger cannot normally provide 9V/12V/15V/20V through this module. Always verify the selected output voltage with a multimeter before connecting your device. Do not connect a device that requires a lower voltage than the selected output. The module is a trigger/decoy board, not a standalone DC-DC boost converter. Maximum available output power/current depends on the connected USB-C charger/power bank and the module's specifications. Do not short the output terminals. 20V output can damage 5V/9V/12V-only electronics if the wrong voltage is selected. Exact selectable voltages and current capability can vary between board versions. 📦 Package Includes 1 × Type-C PD/QC/AFC Fast Charge Decoy Trigger Module
UPS Rocker Switch Red 6 Pin ON-OFF-ON with Indicator
[Mechanical Switches] UPS Rocker Switch Red 6 Pin ON-OFF-ON with Indicator – BR34 The UPS Rocker Switch Red 6 Pin ON-OFF-ON with Indicator (BR34) is a durable rocker switch designed for reliable switching applications. It features a 6-pin DPDT configuration, copper contacts and a large rocker design with an indicator light for convenient operation and status indication. With a rated voltage of up to 250V and a rated current of 6A, it is suitable for UPS systems, power strips, stabilizers, water dispensers, coffee machines, automobiles, USB hubs, machinery and other electrical equipment. ⭐ Key Features 6-pin rocker switch ON-OFF-ON switching function DPDT switch configuration Red color Built-in indicator Copper contact construction Illuminated design Large rocker size Rated current up to 6A Rated voltage up to 250V Durable construction Suitable for panel-mount applications Indicator helps provide visual switching/status indication 📋 Technical Specifications Model: BR34 Switch Type: Rocker Switch Switch Function: ON-OFF-ON Number of Pins: 6 Switch Throw Type: DPDT Rated Voltage: 250V Rated Current: 6A Illuminated: Yes / With Indicator Indicator: Built-in indicator Contact Plating: Copper Material: Copper and Iron Color: Red Size: Big Rocker Mechanical Life: Up to 5 years Mounting: Panel Mount Application: Electrical and electronic equipment 🔧 Applications UPS systems Power strips Voltage stabilizers Water dispensers Coffee machines Automobiles USB hubs Electrical machinery DIY electrical projects Control panels Power switching applications 🛠️ Installation Ensure the power supply is switched OFF before installation. Identify the correct terminals according to the required DPDT switching configuration. Connect the wires securely to the appropriate terminals. Ensure the connected load does not exceed the 6A rated current. Mount the switch firmly into the appropriate panel cutout. Verify the indicator wiring and rating before connection. 📦 Package Includes 1 × UPS Rocker Switch Red 6 Pin ON-OFF-ON with Indicator Model: BR34 ⚠️ Precautions Do not exceed the rated 250V / 6A specification. Switch OFF the power supply before installation or wiring. Ensure proper insulation of all electrical connections. Use suitable wiring according to the connected load. Verify the indicator voltage specification before connecting it to the circuit. Verify the pin configuration before connecting the switch. Do not directly connect the indicator to a voltage for which it is not rated.
UPS Rocker Switch Black 6 Pin ON-OFF-ON
[Mechanical Switches] UPS Rocker Switch Black 6 Pin ON-OFF-ON – BR34 The UPS Rocker Switch Black 6 Pin ON-OFF-ON (BR34) is a durable rocker switch designed for reliable switching applications. It features a 6-pin DPDT configuration, copper contacts and a large rocker design for convenient operation. With a rated voltage of up to 250V and a rated current of 6A, it can be used in power strips, stabilizers, water dispensers, coffee machines, automobiles, USB hubs, machinery and other electrical equipment. ⭐ Key Features 6-pin rocker switch ON-OFF-ON switching function DPDT switch configuration Black color Copper contact construction Non-illuminated design Large rocker size Rated current up to 6A Rated voltage up to 250V Durable construction Suitable for panel-mount applications 📋 Technical Specifications Model: BR34 Switch Type: Rocker Switch Switch Function: ON-OFF-ON Number of Pins: 6 Switch Throw Type: DPDT Rated Voltage: 250V Rated Current: 6A Illuminated: No / Non-Illuminated Contact Plating: Copper Material: Copper and Iron Color: Black Size: Big Rocker Mechanical Life: Up to 5 years Mounting: Panel Mount Application: Electrical and electronic equipment 🔧 Applications UPS systems Power strips Voltage stabilizers Water dispensers Coffee machines Automobiles USB hubs Electrical machinery DIY electrical projects Control panels Power switching applications 🛠️ Installation Ensure the power supply is switched OFF before installation. Identify the correct terminals according to the required DPDT switching configuration. Connect the wires securely to the appropriate terminals. Ensure the connected load does not exceed the 6A rated current. Mount the switch firmly into the appropriate panel cutout. 📦 Package Includes 1 × UPS Rocker Switch Black 6 Pin ON-OFF-ON ⚠️ Precautions Do not exceed the rated 250V / 6A specification. Switch OFF the power supply before installation or wiring. Ensure proper insulation of all electrical connections. Use suitable wiring according to the connected load. This is a non-illuminated switch. Verify the pin configuration before connecting the switch to your circuit.
48mm Square Internal Magnet Speaker – 4Ohms 5W
[Speakers] 48mm Square Internal Magnet Speaker – 4Ω 5W The 48mm Square Internal Magnet Speaker is a compact full-range audio driver designed for clear and efficient sound reproduction in space-constrained applications. With a 4Ω impedance and 5W power rating, this speaker is suitable for Bluetooth speakers, portable audio systems, DIY speaker projects and embedded electronic devices. Its square frame allows convenient mounting inside compact enclosures and panels. ⭐ Key Features Compact square speaker design 4Ω impedance 5W power rating Internal magnet construction Full-range audio output Compact size for space-limited applications Easy to install inside speaker enclosures Suitable for DIY and commercial audio projects Lightweight and practical design 📋 Technical Specifications Speaker Type: Internal Magnet Speaker Shape: Square Speaker Size: 48mm class Model: 4Ω 5W Impedance: 4Ω Power Rating: 5W Magnet Type: Internal Magnet Audio Type: Full-range Mounting Type: Panel / Enclosure Mount Dimensions: 47 × 29 × 23mm Application: Compact audio systems, DIY electronics and portable speakers 🔧 Applications Bluetooth speaker systems Portable speakers DIY speaker projects Compact audio enclosures Embedded audio systems Intercom systems Alert and notification devices Educational electronics projects Consumer electronic devices Custom audio projects 🛠️ Installation Connect the speaker to a compatible amplifier with a 4Ω output. Ensure the amplifier's output power is suitable for the speaker's 5W rating. Mount the speaker securely inside the enclosure to reduce unwanted vibration. Observe correct speaker polarity when connecting multiple speakers. 📦 Package Includes 1 × 48mm Square Internal Magnet Speaker Impedance: 4Ω Power: 5W ⚠️ Precautions Do not exceed the 5W rated power for prolonged operation. Use a compatible 4Ω amplifier. Avoid short-circuiting the speaker terminals. Keep away from moisture, excessive heat and physical damage. Ensure proper mounting to minimize vibration and unwanted noise. Actual sound quality depends on the amplifier, enclosure and application.
Digital USB Mobile Power Charging Current Voltage Tester Meter
[Ammeter and Voltmeter] Digital USB Mobile Power Charging Current Voltage Tester Meter The Digital USB Mobile Power Charging Current Voltage Tester Meter is a compact USB testing device designed to measure and display charging voltage and current in real time. It is useful for checking the power output of USB chargers, power banks and other USB-powered devices. ⭐ Key Features Precise current and voltage measurement Simultaneous voltage and current display Bright digital LCD display Straight USB connector design USB Type-A Male input and USB Type-A Female output Compact and lightweight Easy to connect and use Suitable for USB chargers and power banks Compatible with USB-powered devices 📋 Technical Specifications Product Name: Digital USB Mobile Power Charging Current Voltage Tester Meter Color: As per available stock Input Voltage: 3.5V–7.0V Output Voltage: 3.5V–7.0V Current Measurement Range: 0A–3A Voltage Accuracy: ±1% Current Accuracy: ±1% Display Type: Digital LCD Display Screen Size: 0.91 inch Data Display: Voltage and Current simultaneously Power Consumption: ≤0.1W Interface: USB Type-A Male (Input) / USB Type-A Female (Output) Measurement Frequency: 2 times per second Operating Temperature: 0°C–45°C Material: ABS Plastic Dimensions: 64 × 23 × 15mm Weight: 15g Compatibility: USB-powered devices 🔧 Applications Mobile charger testing USB charger testing Power bank testing USB power supply testing Mobile phone charging analysis USB device testing Electronics troubleshooting DIY electronics projects Checking charging voltage and current 🛠️ How to Use Insert the USB Type-A Male connector into the USB charger, power bank or USB power source. Connect the USB-powered device to the USB Type-A Female output. The digital display will show the voltage and charging current. Monitor the readings during charging or testing. 📦 Package Includes 1 × Digital USB Mobile Power Charging Current Voltage Tester Meter ⚠️ Important Notes Do not exceed the specified voltage and current measurement ranges. This tester is intended for USB/DC applications. Actual readings may vary depending on the charger, cable and connected device. Use within the specified operating temperature range.
KWS-MX18 10-in-1 USB Tester Digital LCD Voltage, Current & Power Meter
[Ammeter and Voltmeter] KWS-MX18 10-in-1 USB Tester – Digital LCD Voltage, Current & Power Meter The KWS-MX18 10-in-1 USB Tester is a compact multifunction digital testing instrument designed for monitoring and evaluating USB chargers, power banks, USB ports, mobile charging systems, and other DC power sources. It provides real-time measurement of voltage, current, power, capacity, energy, charging time, resistance, and internal temperature on its digital display. The tester supports a DC voltage range of 4–30V and current measurement up to approximately 5.1A, with power measurement up to 150W. It also provides capacity and energy monitoring, making it useful for checking the actual charging performance and capacity of USB power supplies and power banks. ⭐ Key Features 10-in-1 multifunction USB tester Digital LCD display Real-time voltage and current monitoring Measures power consumption Measures accumulated charging capacity Measures energy consumption Charging time measurement Charging resistance measurement Internal temperature measurement Positive and negative voltage measurement Stores measurement data in 9 groups Power-off memory function Compact and lightweight design Suitable for USB charger and power-bank testing Supports QC2.0 / QC3.0 according to available product information 📋 Technical Specifications Product Type: 10-in-1 USB Digital Tester Model: KWS-MX18 Input Voltage Range: DC 4–30V Current Measurement: 0–5.1A Power Measurement: 0–150W Capacity Measurement: 0–999999mAh Energy Measurement: 0–999999mWh Timing Range: 0–99 Hours Charging Resistance: 0–999.9Ω Internal Temperature: 0–80°C Positive Voltage Measurement: 0–10V Negative Voltage Measurement: 0–10V Memory Groups: 1–9 Display: Digital LCD Material: ABS Dimensions: Approximately 56.6 × 24.7 × 11.2mm Weight: Approximately 13.9g Input Connector: USB Output Connector: USB Function Button: Yes 🔍 10 Measurement Functions Voltage: 4–30V DC Current: 0–5.1A Power: 0–150W Capacity: 0–999999mAh Energy: 0–999999mWh Charging Time: 0–99 hours Charging Resistance: 0–999.9Ω Positive Voltage: 0–10V Negative Voltage: 0–10V Internal Temperature: 0–80°C 💾 Memory Function The KWS-MX18 can store charging measurement information in 9 separate memory groups. This allows you to compare charging capacity and energy measurements from different chargers or devices. The stored data can be viewed using the function button, and an individual memory group can be cleared by holding the button for approximately 3 seconds. 🔘 Button Functions Single Press: View stored measurement data from memory groups 1–9. Long Press: Clear the currently selected memory group. Double Press: Change the display page. Calibration: The device supports voltage and current calibration according to the supplied manual. 🔌 Applications USB Charger Testing Mobile Charger Testing Power Bank Testing USB Port Testing Mobile Phone Charging Analysis USB Cable Testing Power Supply Monitoring DC Power Measurement Electronics Troubleshooting DIY Electronics Projects Charger Performance Testing Battery Charging Analysis 🛠️ How to Use Connect the KWS-MX18 in-line between the USB power source and the USB-powered device. Once powered, the LCD displays the measured electrical parameters. You can use the function button to change display pages and access stored measurement data. It is particularly useful for comparing chargers, power banks, cables, and USB ports by monitoring actual voltage, current, power, capacity, and energy delivered. 📦 Package Includes 1 × KWS-MX18 10-in-1 USB Digital Tester ⚠️ Color Note: Color: White / Black Color will be shipped depending on stock availability. Any one color (White or Black) may be shipped based on available stock. Specific color cannot be guaranteed. ⚠️ Precautions Do not exceed the specified 30V DC input voltage. Do not exceed the specified current measurement range. Ensure correct USB connection direction before use. Keep the tester away from water and excessive moisture. Do not use it for measuring mains AC voltage. The device is intended for DC/USB power measurement. Actual measurement accuracy can depend on the connected source, load, cable, and operating conditions.
Almirah Wardrobe Switch – 250V AC 6A Momentary Push-to-Off Switch
[Mechanical Switches] Almirah Wardrobe Switch – 250V AC 6A Momentary Push-to-Off Switch The Almirah Switch is a compact single-pole momentary push-to-off switch designed for use in almirahs, cupboards, wardrobes, cabinets, and furniture lighting applications. It provides instantaneous switching action and is suitable for applications where an electrical circuit needs to be switched according to the opening or closing of a cabinet or door. The switch features a high-grade polycarbonate body and brass contacts, providing reliable electrical conduction and durability for regular use. Its compact design is intended to fit standard almirah cutouts and supports panel or surface mounting with screw-type wire terminals. With a rating of 250V AC and 6A, an IP20 protection level, and a mechanical life of more than 10,000 operations, this switch is suitable for indoor furniture and cabinet applications. ⭐ Key Features 250V AC rated voltage 6A current rating Single-pole design Momentary push-button operation Push-to-Off action Instantaneous response High-grade polycarbonate construction Brass electrical contacts Compact design for standard almirah cutouts Panel or surface mounting Screw-type wire terminals Glossy white finish Mechanical life of >10,000 operations IP20 protection RoHS compliant 📋 Technical Specifications Product Type: Almirah Switch Switch Type: Momentary Actuator Type: Push Button Circuit Type: Single Circuit Number of Poles: Single Pole Rated Voltage: 250V AC Maximum Voltage: 250V AC Current Rating: 6A Maximum Current: 6A Response Time: Instantaneous Automation Grade: Manual Material: High-Grade Polycarbonate Contact Material: Brass Wire Terminal: Screw-Type Mounting Type: Panel / Surface Mount Protection Level: IP20 Finish Type: Glossy Color: White Operating Temperature: -10°C to +50°C Temperature Range: -10°C to +50°C Mechanical Life: >10,000 Operations Insulation Resistance: 100MΩ Minimum @ 500V DC Contact Resistance: 50mΩ Stroke: Standard Push-to-Off Action Size: Compact; fits standard almirah cutout Weight: Approximately 20g Number of Modules: Single Module UV Stabilized: Normal RoHS Compliance: Yes 🔌 Operation The switch provides a push-to-off momentary action. It is designed for applications where the switch operates automatically through the physical movement of a cupboard, wardrobe, almirah, or cabinet door. 🔧 Applications Almirah Lighting Cupboard Lighting Wardrobe Lighting Cabinet Lighting Furniture Lighting Storage Cabinet Applications Office Cabinets Home Furniture Control Panels Indoor Electrical Applications 🛠️ Installation The switch can be installed using its panel or surface mounting arrangement. Fit the switch into a suitable cutout and secure it firmly. Connect the wires to the screw-type terminals with the power supply switched off during installation. 📦 Package Includes 1 × Almirah Switch – White, 250V AC 6A ⚠️ Precautions Disconnect the power supply before installation or wiring. Do not exceed the 250V AC / 6A rating. Ensure screw terminals are tightened securely. Use suitable wiring for the connected load. Intended primarily for indoor applications. IP20 protection does not provide waterproof protection. Do not use in wet or exposed outdoor environments. Replace the switch if contacts become damaged or operation becomes unreliable. ❓ Frequently Asked Questions Q: What is the voltage and current rating?A: The switch is rated for 250V AC and 6A. Q: What type of switch is it?A: It is a single-pole momentary push-to-off switch. Q: Where can it be installed?A: It is designed for almirahs, cupboards, wardrobes, cabinets, and similar furniture applications. Q: What material is used for the switch?A: The body is made from high-grade polycarbonate, with brass contacts. Q: What is the mechanical life?A: The supplied specification states a mechanical life of more than 10,000 operations.
Black Plastic 3×18650 Battery Holder or Case Series Connection With Wire
[Lithium Battery Holder] Black Plastic 3×18650 Battery Holder – Series Connection The Black Plastic 3×18650 Battery Holder is designed to securely hold three 18650 lithium-ion battery cells in series configuration. It provides a convenient and organized way to mount 18650 cells for DIY battery packs, portable electronics, power supplies, LED projects, and other battery-powered applications. The holder is made from durable plastic and features mounting holes for secure installation using suitable screws. It is supplied with red and black connecting wires for convenient connection to an external circuit. ⭐ Key Features Designed for 3 × 18650 battery cells Series connection Black plastic construction Without cover Secure battery positioning Easy installation Built-in mounting holes Red and black connecting wires Suitable for DIY battery pack projects Compact and lightweight design 📋 Technical Specifications Product Type: 18650 Battery Holder Battery Capacity: 3 Cells Battery Type: 18650 Li-Ion Cell Configuration: 3S / Series Connection Nominal Output Voltage: Approximately 11.1V with 3.7V cells Fully Charged Voltage: Approximately 12.6V Material: Plastic Color: Black Cover: Without Cover Connection Wires: Red and Black Mounting: Screw Mount Mounting Holes: Yes Recommended Screw Size: Approximately 3mm Application: Battery Pack / Portable Electronics 🔌 Connection The three 18650 cells are connected in series, increasing the total voltage while maintaining the capacity of a single cell. With standard 3.7V nominal cells, the pack is approximately 11.1V nominal and 12.6V when fully charged. The red wire is the positive connection and the black wire is the negative connection. 🔧 Applications DIY 18650 Battery Packs 3S Lithium-Ion Battery Packs Portable Electronics LED Lighting Projects DIY UPS Projects Arduino Projects ESP8266 / ESP32 Projects Rechargeable Electronics Battery-Powered Devices Electronics Prototyping 📦 Package Includes 1 × 3×18650 Battery Holder / Case – Series Connection, Without Cover ⚠️ Precautions Use only compatible 18650 Li-Ion cells. Use three cells with matching capacity, chemistry, age, and charge condition. Use a suitable 3S BMS/protection and charging circuit. Do not mix damaged or mismatched cells. Check polarity carefully before installation. Do not short-circuit the battery terminals. Do not use damaged, swollen, or leaking cells. Ensure the holder and wiring are securely installed.
25 Watt Soldering Iron with 3mm Tip
[Soldering Iron] 25W Soldering Iron – Deluxe Economic The 25W Soldering Iron – Deluxe Economic is a compact and practical soldering tool designed for electronics assembly, component soldering, PCB repair, circuit modifications, and general-purpose electronic work. With a 25W heating element and included 3mm spade tip, it provides a convenient solution for routine soldering applications. The soldering iron features a quick-heating element to reduce waiting time before operation. It is compatible with most standard soldering tips available on the market, making it suitable for both hobbyists and professional electronics repair work. This soldering iron is manufactured in India and may be supplied under SAMCON, Devaji, Noel, Alpine, or an equivalent manufacturer, depending on availability. ⭐ Key Features 25W power output Includes 3mm spade tip Quick-heating capability Compatible with most standard soldering tips Compact and practical design Suitable for PCB soldering and repair Durable construction for general electronics work Suitable for hobbyists, technicians, and educational use Made in India 📋 Technical Specifications Product Type: Electric Soldering Iron Model: Deluxe Economic Power Rating: 25W Tip Type: 3mm Spade Tip: 3mm Spade Tip, Pre-Installed Heating Type: Quick Heating Tip Compatibility: Most Standard Soldering Tips Manufacturer: SAMCON / Devaji / Noel / Alpine or Equivalent Country of Origin: India Application: Electronics Soldering and PCB Repair 🔧 Applications General Electronics Component Soldering PCB Assembly PCB Repair Circuit Modifications Electronics Hobby Projects DIY Electronics Educational Electronics Workshops Component Replacement Wire Soldering General Electrical & Electronic Repair 🛠️ How to Use Insert a suitable soldering tip and allow the iron to heat up. Apply solder to the heated joint and component connection to create a proper electrical and mechanical connection. After completing the work, place the soldering iron safely on a heat-resistant stand and allow it to cool before storage. 📦 Package Includes 1 × 25W Soldering Iron 1 × 3mm Spade Tip (Pre-Installed) ⚠️ Precautions The soldering tip becomes extremely hot during operation. Do not touch the heated tip or metal parts during use. Always place the soldering iron on a suitable heat-resistant stand when not in use. Use in a well-ventilated area. Wear appropriate eye protection during soldering. Keep away from children and flammable materials. Disconnect from the power supply after use. Allow the iron to cool completely before changing the tip. Lead-free solder may require higher temperatures and may not perform optimally with every 25W soldering application. ❓ Frequently Asked Questions Q: Can the 3mm spade tip be replaced?A: Yes. The supplied specification states that the soldering iron is compatible with most standard soldering tips, allowing tip replacement. Q: What safety precautions are required?A: Use the soldering iron in a well-ventilated area, use eye protection, and place it on a heat-resistant stand when not in use. Q: Is it compatible with lead-free solder?A: It can be used with lead-free solder, although lead-free soldering may require higher temperatures depending on the application.
Out of stockGold AP-55 TPA3116D2 2×50W Bluetooth Stereo Digital Amplifier Board with USB, TF Card, FM & Remote
[Amplifier Board] Gold AP-55 TPA3116D2 2×50W Bluetooth Stereo Digital Amplifier Board with USB, TF Card, FM & Remote The Gold AP-55 is a compact Class-D stereo digital audio amplifier board based on the TPA3116D2 amplifier IC, designed for DIY Bluetooth speakers, home audio systems, portable speakers, bookshelf speakers, multimedia systems, and custom audio projects. Available product listings consistently identify the AP-55 as a dual-channel 50W + 50W amplifier, with a DC input range around 8–24V or 12–24V depending on the listing/version. The AP-55 combines the power amplifier with a multimedia player supporting Bluetooth 5.0, USB, TF/SD card, FM radio and AUX input. The Bluetooth device name is reported as GD-82EM, while the FM tuner covers 87.5–108.0MHz. It also includes an infrared remote control and a digital display for convenient operation. The TPA3116D2 Class-D amplifier provides efficient stereo amplification, making the board suitable for building compact but powerful audio systems. One detailed listing specifies support for 4Ω–8Ω speakers, with the commonly advertised maximum output of 50W per channel. ⭐ Key Features Gold AP-55 amplifier module TPA3116D2 Class-D amplifier IC 50W + 50W dual-channel stereo output Supports 4Ω–8Ω speakers Bluetooth 5.0 wireless audio Bluetooth device name: GD-82EM Built-in USB music player Built-in TF / SD card player Built-in FM radio FM frequency range 87.5–108.0MHz 3.5mm AUX input Infrared remote control Digital display Supports MP3 / WMA / WAV Power-off memory function Remembers the previous song and volume Compact design for DIY speaker projects High-efficiency Class-D amplification 📋 Technical Specifications Product Type: Stereo Class-D Digital Amplifier Board Model: Gold AP-55 Amplifier IC: TPA3116D2 Amplifier Class: Class-D Number of Channels: 2 / Stereo Output Power: 50W + 50W Maximum Total Output: 100W Speaker Impedance: 4Ω–8Ω Input Voltage: DC 8–24V (some listings specify 12–24V; verify the exact board version before use) Bluetooth Version: 5.0 Bluetooth Name: GD-82EM Bluetooth Range: Up to approximately 10–15m under suitable conditions Audio Formats: MP3 / WMA / WAV USB Support: Yes TF/SD Card Support: Yes FM Radio: Yes FM Frequency: 87.5–108.0MHz AUX Input: 3.5mm / Wired Audio Input Remote Control: IR Remote Remote Range: Approximately 4–7m Display: Digital Display Power-Off Memory: Yes Memory Function: Last song and volume Audio Input Modes: Bluetooth / USB / TF Card / FM / AUX Output: Dual-Channel Stereo Efficiency: Greater than 90% according to one detailed listing SNR: Approximately 102dB according to one detailed listing Distortion: Below 0.1% at normal listening levels according to one detailed listing Board Size: Approximately 70 × 50 × 20mm with shell, according to one listing 🎵 Audio & Playback Functions The AP-55 can switch between Bluetooth, USB, TF/SD Card, FM Radio and AUX sources. When Bluetooth mode is selected, users can pair a phone or other compatible device with GD-82EM. USB and TF/SD cards can be used for local music playback, while AUX provides a wired audio input. 📻 FM Radio The built-in FM tuner supports the 87.5–108.0MHz broadcast band. FM stations can be searched and selected using the onboard controls or remote control. 🎛️ Controls & Remote The module provides controls for functions such as previous track, next track, volume up, volume down, play/pause, mode selection and FM station selection. The infrared remote provides additional wireless control of playback, volume, mode and other supported functions. 🔧 Applications DIY Bluetooth Speakers High-Power Bluetooth Speaker Projects Portable Speaker Systems Bookshelf Speaker Systems Home Audio Projects Multimedia Speaker Systems USB MP3 Speaker Systems TF/SD Card Music Players FM Radio Speaker Projects Car Audio Projects Custom Wooden Speaker Cabinets Desktop Audio Systems Electronics DIY Projects 🛠️ Installation Connect a suitable DC power supply within the specified voltage range and observe the correct polarity. Connect the left and right speaker outputs to compatible 4Ω–8Ω speakers. Select Bluetooth, USB, TF/SD, FM or AUX according to the desired audio source. For maximum advertised output, a suitable 24V high-current power supply is recommended by one vendor; at lower supply voltages, available output power will be lower. 📦 Package Includes 1 × Gold AP-55 TPA3116D2 2×50W Bluetooth Amplifier Board 1 × IR Remote Control 1 × Required Connecting Wires/Cables (package contents may vary by seller/version) ⚠️ Precautions Verify the exact input voltage requirement of your AP-55 version before powering it. Do not exceed 24V DC where the board specification limits input to 24V. Check power polarity carefully before connection. Use speakers with a compatible 4Ω–8Ω impedance. Do not short-circuit the speaker output terminals. Ensure adequate ventilation during high-power operation. Use a suitable high-current power supply for high-output operation. Do not connect the speaker outputs together or directly to ground. Keep the board away from moisture and conductive materials. Incorrect wiring or excessive voltage can permanently damage the amplifier IC.
45mm 1.75-Inch 4Ohms 3W Internal Magnet Speaker with Frame
[Speakers] 45mm Internal Magnet Speaker with Frame – 4Ω 3W 45×23×23mm The 45mm Internal Magnet Speaker with Frame (1.75-Inch) is a compact and efficient audio driver designed for DIY electronics, portable audio devices, multimedia systems, toys, alarms, intercoms, and embedded audio applications. Featuring an internal magnet structure and durable mounting frame, this speaker provides clear and stable sound output while maintaining a compact form factor. With a compact size of 45×23×23mm, 4Ω impedance, and 3W power rating, this speaker is suitable for small amplifier projects and electronic devices where space is limited. Its built-in frame allows convenient installation in custom enclosures, panels, and electronic products. ⭐ Key Features 45mm (1.75-Inch) speaker size 4Ω impedance 3W power rating Internal magnet design Durable mounting frame Compact 45×23×23mm construction Clear and stable sound output Lightweight and space-saving Suitable for low-power audio applications Easy to install in custom enclosures Ideal for DIY, repair and OEM applications 📋 Technical Specifications Product Type: Internal Magnet Speaker Speaker Size: 45mm (1.75 Inch) Dimensions: 45 × 23 × 23mm Impedance: 4Ω Power Rating: 3W Magnet Type: Internal Magnet Frame Type: With Mounting Frame Speaker Type: Dynamic Full Range Speaker Audio Type: Mini Full Range Speaker Mounting: Frame / Panel Mount Application: Compact Audio & Embedded Electronics 🔧 Applications DIY Speaker Projects Portable Audio Devices Bluetooth Speaker Projects Multimedia Speaker Systems Alarm Systems Toys and Sound Modules Intercom Systems Embedded Electronics Educational Electronics Kits Replacement Speaker Repairs Smart Gadgets OEM Product Manufacturing Mini Amplifier Projects 🛠️ Installation Mount the speaker securely inside the required enclosure or panel using its mounting frame. Connect it to a compatible amplifier with an output suitable for 4Ω speakers and a power rating appropriate for the 3W speaker. Proper mounting helps reduce unwanted vibration and improves overall sound performance. 📦 Package Includes 1 × 45mm Internal Magnet Speaker with Frame – 4Ω 3W ⚠️ Precautions Match the 4Ω impedance with the amplifier output. Do not exceed the 3W rated power. Do not apply direct DC voltage to the speaker. Ensure correct wiring polarity during installation. Avoid exposure to moisture and excessive dust. Mount securely to prevent vibration and unwanted noise. Do not apply physical pressure to the speaker cone or diaphragm. Use a compatible audio amplifier module for proper operation.
2 Inch 4 Ohms 5Watt Internal Magnet Speaker with Frame
[Speakers] 2-Inch Internal Magnet Speaker with Frame – 53×29×23mm 4Ω 5W The 2-Inch Internal Magnet Speaker with Frame is a compact and efficient audio driver designed for DIY electronics, portable audio devices, alarms, toys, embedded systems, and other space-constrained applications. Featuring an internal magnet design and durable frame construction, this speaker provides clear and balanced sound output while maintaining a compact footprint. With dimensions of 53×29×23mm, 4Ω impedance, and a 5W power rating, this speaker is suitable for small amplifier projects and electronic devices requiring a compact audio solution. The mounting frame makes installation convenient in custom enclosures and equipment. ⭐ Key Features 2-Inch compact speaker design Internal magnet structure 4Ω impedance 5W power rating Durable metal frame construction Clear and balanced sound output Compact and space-saving design Easy mounting with frame and screw slots Suitable for low and medium-power audio applications Ideal for DIY and OEM applications 📋 Technical Specifications Product Type: Dynamic Internal Magnet Speaker Speaker Size: 2 Inch Dimensions: 53 × 29 × 23mm Impedance: 4Ω Power Rating: 5W Magnet Type: Internal Magnet Magnet Material: Ferrite Shape: Rectangular Frame Type: Metal Frame Cone Material: Paper / Mylar Diaphragm depending on variant Speaker Type: Full Range / Dynamic Speaker Mounting: Frame with Screw Slots Application: Compact Audio & Embedded Electronics 🔧 Applications DIY Speaker Projects Portable Audio Devices Bluetooth Speaker Projects Alarm Systems Toys and Sound Modules Intercom Systems Embedded Electronics Educational Electronics Kits Replacement Speaker Repairs Smart Gadgets OEM Product Manufacturing Mini Amplifier Projects 🛠️ Installation Connect the speaker to a compatible amplifier output matching the speaker's 4Ω impedance and 5W power rating. Secure the speaker firmly using the mounting frame to reduce unwanted vibration and noise during operation. 📦 Package Includes 1 × 2-Inch Internal Magnet Speaker with Frame – 4Ω 5W ⚠️ Precautions Match the 4Ω impedance with the amplifier output. Do not exceed the 5W rated power. Avoid applying direct DC voltage to the speaker. Avoid exposure to moisture and excessive humidity. Mount the speaker securely before operation. Do not apply physical pressure to the speaker cone or diaphragm. Avoid short circuits at the speaker terminals. Keep the speaker away from excessive heat and magnetic interference.
1K Ohm Rotary Potentiometer Round Shaft 3 Pin Elcon
[Potentiometer] 1KΩ Rotary Potentiometer Round Shaft Elcon The 1KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 1KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 10mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 1KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 10mm Body Diameter / Width: 16mm Total Height: Approx. 25mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 1KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 1KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch before installation.
5K Ohms Rotary Potentiometer Round Shaft 3 Pin Elcon
[Potentiometer] 5KΩ Rotary Potentiometer Round Shaft Elcon The 5KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 5KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 13mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 5KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 13mm Body Diameter / Width: 16mm Total Height: Approx. 28mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 5KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 5KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch
16 sq mm Copper Ring Lug Cable Terminal
[Terminal Connector] 16 sq mm Pure Copper Ring Lug Cable Terminal The 16 sq mm Pure Copper Ring Lug Cable Terminal is a high-quality electrical cable lug designed for making secure and reliable connections in high-current electrical systems. Made from pure copper, it provides excellent electrical conductivity and a strong mechanical connection between the cable and the terminal point. The ring lug design allows the terminal to be securely fastened to battery terminals, busbars, studs, bolts, and other electrical connection points. It is suitable for battery packs, inverters, UPS systems, solar installations, automotive wiring, and industrial electrical applications. The compact construction provides a reliable connection while allowing easy installation using a suitable crimping tool. The terminal is ideal for applications where a strong and low-resistance electrical connection is required. ⭐ Key Features Made from pure copper Designed for 16 sq mm cable Ring lug terminal design Excellent electrical conductivity Strong and reliable mechanical connection Suitable for high-current applications Easy bolt and stud mounting Suitable for battery and power wiring Ideal for electrical and DIY applications 📋 Technical Specifications Product Type: Copper Ring Cable Lug Material: Pure Copper Compatible Cable Size: 16 sq mm Terminal Type: Ring Lug Finish: Natural Copper / Tinned, depending on variant Connection Type: Bolt / Stud Mount Application: High-Current Electrical Connections 🔧 Applications Lithium Battery Packs LiFePO₄ Battery Systems Lead-Acid Batteries Inverter Connections UPS Systems Solar Power Systems Automotive Wiring Electrical Panels Power Distribution Industrial Wiring DIY Battery Projects 📦 Package Includes 1 × 16 sq mm Pure Copper Ring Lug Cable Terminal ⚠️ Precautions Select the correct lug according to the 16 sq mm cable size and required mounting hole diameter. Use a suitable cable-lug crimping tool for a secure connection. Ensure the cable is properly inserted and crimped before use. Do not exceed the safe current capacity of the cable and terminal assembly. Ensure all electrical connections are properly insulated and secured.
2.25-Inch 8ohms 8W Full Range Speaker for Compact Audio Applications
[Speakers] 2.25-Inch 8Ω 8W Full Range Speaker for Compact Audio Applications The 2.25-Inch 8Ω 8W Full Range Speaker is a compact and efficient audio driver designed for small electronic and embedded sound applications. Featuring an 8Ω impedance and 8W power rating, this speaker delivers clear and balanced sound output while maintaining low power consumption and excellent efficiency. Its compact size makes it ideal for projects where installation space is limited, including portable speakers, DIY electronics, toys, alarm systems, intercom devices, and mini speaker enclosures. The full-range design allows it to reproduce a broad range of audio frequencies, making it suitable for both voice and music playback applications. Built with durable materials and designed for reliable long-term performance, this speaker is an excellent choice for electronics hobbyists, engineers, and product developers working on custom audio projects. ⭐ Key Features 2.25-Inch compact speaker driver 8Ω impedance 8W power rating Full-range audio reproduction Clear and balanced sound output Lightweight and compact design Easy to mount in enclosures and panels Suitable for low to medium-power audio applications Durable construction for long-term use Ideal for DIY and embedded audio systems 📋 Technical Specifications Product Type: Full Range Speaker Speaker Size: 2.25 Inch Impedance: 8Ω Power Rating: 8W Speaker Type: Full Range Mounting Type: Enclosure / Panel Mount Application Type: Audio Output 🔧 Applications Portable Speaker Systems DIY Audio Projects Bluetooth Speaker Modules Toys and Educational Kits Alarm and Notification Systems Embedded Electronic Devices Mini Amplifiers and Sound Modules Intercom Systems Robotics Projects Custom Speaker Enclosures ⚠️ Precautions Do not exceed the 8W rated power. Use an amplifier compatible with an 8Ω speaker load. Avoid exposure to moisture and excessive dust. Mount securely to minimize vibration and distortion. Do not apply direct pressure on the speaker cone. 📦 Package Includes 1 × 2.25-Inch 8Ω 8W Full Range Speaker