All products · 223 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Out of stockSamsung Odyssey OLED G8 34" UWQHD 175Hz
34" UWQHD QD-OLED ultrawide, 175Hz, 0.1ms response. Premium pick.
Out of stock0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306
[LED/LCD Display] 0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306 The 0.96-inch Blue OLED Display Module is a compact graphical display based on the SSD1306 driver IC, featuring a 128×64 pixel resolution and blue monochrome display. This version has a 7-pin interface with a dedicated CS (Chip Select) pin, making it suitable for 4-wire SPI communication. The module is factory-configured for SPI and can also be modified for I2C/IIC communication on compatible board versions. With its compact size, wide viewing angle and low-power OLED technology, it is suitable for Arduino, ESP32, ESP8266, STM32, Raspberry Pi and other microcontroller projects. ⭐ Key Features 0.96-inch blue OLED display 128 × 64 pixel resolution SSD1306 driver IC 7-pin interface Dedicated CS (Chip Select) pin Factory configured for 4-wire SPI Supports SPI and I2C/IIC with appropriate configuration 3.3V/5V compatible on supported module versions No backlight required Low power consumption Wide viewing angle of more than 160° Compact PCB design Pre-soldered 7-pin male header Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi projects 📋 Technical Specifications Display Type: OLED (Organic Light-Emitting Diode) Display Colour: Blue Display Size: 0.96 inch Driver IC: SSD1306 Resolution: 128 × 64 pixels Interface: SPI / I2C Default Interface: 4-wire SPI Input Voltage: 3.3V–5V Viewing Angle: >160° Module Dimensions: Approximately 27 × 27 × 4mm Operating Temperature: Approximately -30°C to +70°C Header: 7-pin male header, pre-soldered Display Type: Monochrome blue OLED 🔌 7-Pin Interface The 7-pin version provides the following connections: GND – Ground VCC – Power supply D0 / SCK / CLK – SPI clock D1 / MOSI / SDA – SPI data RES / RST – Display reset DC / A0 – Data/Command selection CS – Chip Select 🛠️ SPI Connection The module is normally supplied in 4-wire SPI configuration. For an Arduino Uno, a typical connection is: VCC → 5V GND → GND D0 → SCK / D13 D1 → MOSI / D11 RES → Digital I/O DC → Digital I/O CS → Digital I/O The dedicated CS pin allows the OLED to share the SPI bus with other devices such as SD cards or additional SPI peripherals. 🔄 I2C / IIC Configuration On compatible versions, the module can be converted from SPI to I2C by changing the appropriate resistor configuration on the PCB. The supplied board configuration may require: Moving the resistor from R3 to R1 Shorting R8 with solder Using D0 as SCL Using D1 as SDA Configuring DC for the I2C address The exact resistor positions can vary between board revisions, so check the markings on your particular PCB before modification. 🎯 Applications Arduino projects ESP32 projects ESP8266 projects STM32 development Raspberry Pi projects IoT devices Sensor displays Voltage/current meters Battery monitors Temperature displays Digital clocks Data loggers Portable electronic devices Robotics DIY measuring instruments Embedded systems Menu and status displays 💡 Advantages of OLED OLED technology is self-emissive, meaning the pixels produce their own light and do not require a conventional backlight. This provides high contrast, compact construction and a wide viewing angle while keeping power consumption relatively low. ⚠️ Important Notes This is the 7-pin SPI version, not the 6-pin version. The module is normally configured for SPI communication. Check the PCB labels before connecting the module. Do not exceed the specified supply voltage. Although many versions support 5V operation, the exact voltage tolerance can vary between board revisions. I2C operation may require hardware resistor modification. The actual PCB layout and component markings may vary slightly between production batches. Display colour: Blue. Libraries such as Adafruit SSD1306 and U8g2 can be used with compatible microcontrollers. 📦 Package Includes 1 × 0.96 Inch Blue SPI OLED Display Module
1K Ohm Rotary Potentiometer Round Shaft 3 Pin Elcon
[Potentiometer] 1KΩ Rotary Potentiometer Round Shaft Elcon The 1KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 1KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 10mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 1KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 10mm Body Diameter / Width: 16mm Total Height: Approx. 25mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 1KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 1KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch before installation.
5K Ohms Rotary Potentiometer Round Shaft 3 Pin Elcon
[Potentiometer] 5KΩ Rotary Potentiometer Round Shaft Elcon The 5KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 5KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 13mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 5KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 13mm Body Diameter / Width: 16mm Total Height: Approx. 28mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 5KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 5KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch
2.25 Inch 4 Ohm 10 Watt Full Range Speaker with Neodymium Magnet
[Speakers] 2.25-Inch Speaker Driver • 4 Ohm Impedance • 10W Power Rating • Neodymium Magnet • Compact Full Range Audio Speaker The 2.25 Inch 4 Ohm 10 Watt Full Range Speaker with Neodymium Magnet is a compact and high-performance speaker driver designed for portable audio systems, DIY speaker projects, multimedia devices, embedded electronics, and custom sound enclosures. Featuring a powerful neodymium magnet, this speaker delivers clear vocals, balanced midrange, and improved bass response while maintaining a lightweight and compact design. With a 4 ohm impedance and 10 watt power rating, the speaker is suitable for use with small audio amplifiers, Bluetooth amplifier modules, DIY portable speakers, mini sound systems, toys, alarm systems, educational kits, and embedded electronic devices. The full-range design allows it to reproduce a wide spectrum of audio frequencies without requiring additional tweeters for many compact applications. Its durable construction and lightweight neodymium magnet assembly make it ideal for applications where both performance and space efficiency are important. ⭐ Features Compact 2.25-inch full range speaker Powerful neodymium magnet 4 ohm impedance 10 watt power rating Clear and balanced sound output Enhanced vocal clarity and midrange performance Lightweight and compact construction Easy to mount in custom enclosures Suitable for portable and embedded audio systems Ideal for DIY electronics and audio projects 📋 Technical Specifications Product Type: Full Range Speaker Driver Speaker Size: 2.25 Inch Impedance: 4 Ohm Power Rating: 10 Watt Magnet Type: Neodymium Speaker Type: Full Range Mounting Type: Enclosure / Panel Mount Application Type: Audio Output Frame Material: Metal Cone Material: Paper Composite Color: Black 🔧 Applications Suitable for: Portable Speaker Systems Bluetooth Speakers DIY Audio Projects Mini Sound Systems Multimedia Devices Toys and Educational Kits Alarm and Notification Systems Embedded Electronic Devices Mini Amplifiers Sound Modules Intercom Systems Custom Speaker Enclosures Robotics and Electronics Projects 📦 Package Includes 1 × 2.25 Inch 4 Ohm 10 Watt Full Range Speaker with Neodymium Magnet ⚠️ Precautions Do not exceed the 10W rated power. Use an amplifier compatible with 4 ohm speakers. Avoid exposure to moisture, water, and excessive dust. Mount the speaker securely to minimize unwanted vibration. Do not apply direct pressure to the speaker cone or surround.
0.3–4mm Mini Drill Chuck with Key & 2.3mm Brass Shaft Adapter for 555 DC Motor
[General DC Motor] 🔧 0.3–4mm Mini Drill Chuck with Key & 2.3mm Brass Shaft Adapter for 555 DC Motor 0.3–4mm Chuck Capacity • JT0 Drill Chuck • 2.3mm Brass Shaft Adapter • Ideal for DIY Mini Drill Machines The 0.3–4mm Mini Drill Chuck with Key and 2.3mm Brass Shaft Adapter is a high-quality accessory designed for converting 555 DC motors into compact mini drilling machines. This complete set includes a precision JT0 drill chuck, a 2.3mm brass motor shaft adapter, and a chuck key for secure tightening and loosening of drill bits. Manufactured from high-carbon steel, the drill chuck provides excellent durability, wear resistance, and high clamping accuracy. It securely holds drill bits ranging from 0.3mm to 4.0mm, making it suitable for precision drilling in wood, plastic, acrylic, PCB boards, resin, aluminum, and other soft materials. The included 2.3mm brass shaft adapter offers a precise fit on 555 DC motor shafts, ensuring smooth power transmission with minimal vibration. Its corrosion-resistant brass construction provides excellent durability and reliable performance for long-term use. This mini drill chuck kit is widely used in DIY mini drill machines, PCB drilling, model making, hobby crafts, jewelry making, electronics repair, and educational projects. ⭐ Features Precision 0.3–4mm JT0 mini drill chuck Includes 2.3mm brass shaft adapter High-carbon steel chuck construction Brass motor shaft connector Secure key-operated chuck mechanism High clamping accuracy Strong impact and wear resistance Smooth and stable operation Easy installation on 555 DC motors Suitable for DIY mini drill machines Compatible with drill bits from 0.3mm to 4mm Compact and lightweight design 📋 Technical Specifications Product Type: Mini Drill Chuck Kit Chuck Capacity: 0.3mm – 4.0mm Chuck Type: JT0 Keyed Drill Chuck Chuck Material: High-Carbon Steel Adapter Material: Brass Motor Shaft Diameter: 2.3mm Connection Type: JT0 Taper Tightening Method: Chuck Key Compatible Motor: 555 DC Motor Application: Mini Electric Drill Conversion Color: Silver & Brass 🔧 Applications Suitable for: DIY Mini Drill Machines 555 DC Motor Projects PCB Drilling Electronics Repair Model Making Jewelry Making Woodworking Plastic Drilling Acrylic Drilling Resin Crafts Hobby Projects Educational Projects Small Precision Drilling Prototype Development 📦 Package Includes 1 × 0.3–4mm JT0 Mini Drill Chuck 1 × Chuck Key (Spanner) 1 × 2.3mm Brass Shaft Adapter ⚠️ Note Designed for 2.3mm diameter motor shafts. Recommended for 555 DC motors and compatible motors with a 2.3mm shaft. Suitable for drilling soft materials such as wood, plastic, acrylic, PCB, and aluminum. Not intended for heavy-duty industrial drilling or hammer drilling applications. Product appearance may vary slightly depending on the manufacturing batch.
5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal
[Power Connector] 🔌 5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal (Male / Female) Standard DC Barrel Connector • 2-Pin Screw Terminal • Solder-Free Installation • Up to 5A Current Rating The 5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal is a convenient and reliable connector designed for quick and secure DC power connections without soldering. Compatible with the industry-standard 5.5mm outer diameter and 2.1mm inner diameter barrel connector, it is widely used in CCTV camera installations, LED lighting, routers, power adapters, and DIY electronics projects. Available in Male and Female variants, this connector features a 2-pin screw terminal that allows wires to be connected easily using a screwdriver. The clearly marked positive (+) and negative (–) terminals help prevent wiring errors, making installation simple for both professionals and hobbyists. Manufactured with a durable ABS plastic housing and nickel-plated metal contacts, this connector provides reliable electrical performance, corrosion resistance, and long service life. Its reusable design makes it ideal for prototyping, repairs, and permanent installations. ⭐ Features Standard 5.5 × 2.1mm DC barrel connector Available in Male and Female versions 2-pin screw terminal for quick wire connection No soldering required Clearly marked positive (+) and negative (–) terminals Supports up to 5A current Durable ABS plastic housing Nickel-plated contacts for improved conductivity Secure and reusable connection Easy plug-and-play installation Suitable for 12V and 24V DC systems Ideal for DIY electronics and repair work 📋 Technical Specifications Product Type: DC Power Jack Plug with Screw Terminal Connector Type: Male / Female Barrel Size: 5.5mm (Outer) × 2.1mm (Inner) Terminal Type: 2-Pin Screw Terminal Rated Voltage: 0–30V DC Recommended Operating Voltage: 12V / 24V DC Maximum Current: Up to 5A Housing Material: ABS Plastic Contact Material: Nickel-Plated Metal Mounting Type: Inline Cable Mount Wire Compatibility: Up to 22 AWG Polarity Marking: Positive (+) / Negative (–) Operating Temperature: -20°C to +80°C 🔧 Applications Suitable for: CCTV Camera Power Connections LED Strip Lighting LED Sign Boards DC Power Adapters Routers and Modems Arduino Projects Raspberry Pi Projects DIY Electronics Battery Packs Power Distribution Systems Industrial Control Equipment Testing and Prototyping Electronic Repairs Low-Voltage DC Power Systems 📦 Package Includes 1 × 5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal (Male or Female variant as selected) ⚠️ Note Please select the required Male or Female connector variant before ordering. Verify polarity before connecting power to avoid damage to connected devices. Suitable for low-voltage DC applications only. Product appearance may vary slightly depending on the manufacturing batch.
110 × 69mm 5V 180mA Mini Solar Panel Cell Module
[Solar Panel] ☀️ 110 × 69mm 5V 180mA Mini Solar Panel Cell Module (0.9W) 5V Output • 180mA Current • 0.9W Power • Polycrystalline Solar Cell • Compact & Lightweight The 110 × 69mm 5V 180mA Mini Solar Panel Cell Module is a compact and efficient photovoltaic module designed to convert sunlight into clean, renewable electrical energy. Delivering a stable 5V output with a maximum current of 180mA, this solar panel is ideal for powering low-power electronic devices, DIY solar projects, battery charging applications, and educational experiments. Built using high-quality polycrystalline silicon solar cells, the module offers efficient energy conversion while maintaining reliable performance under sunlight. Its lightweight construction and compact dimensions make it easy to integrate into portable devices, robotics projects, solar-powered gadgets, and outdoor applications. Designed for durability, the panel features a weather-resistant construction suitable for outdoor use. With pre-drilled mounting holes, installation is quick and convenient for a wide range of renewable energy projects. ⭐ Features High-efficiency polycrystalline solar panel Stable 5V DC output Maximum output current of 180mA Maximum power output of 0.9W Compact size for portable projects Lightweight and easy to install Weather-resistant construction Pre-drilled mounting holes Suitable for outdoor applications Eco-friendly renewable energy source No external power source required Ideal for educational and DIY projects 📋 Technical Specifications Product Type: Mini Solar Panel Cell Module Cell Type: Polycrystalline Silicon Maximum Power Output: 0.9W Output Voltage: 5V DC Maximum Output Current: 180mA Panel Dimensions: 110 × 69 mm Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +85°C Construction: Weather-Resistant Connector: None (Solder Wire Connection) Weight: Approximately 15g 🔧 Applications Suitable for: DIY Solar Projects Solar Battery Chargers Mobile Phone Charging Projects Arduino Projects ESP32 & ESP8266 Projects Raspberry Pi Accessories Robotics Projects Solar Garden Lights Educational Science Experiments IoT Devices Portable Electronic Devices Renewable Energy Demonstrations Emergency Backup Power Projects Small DC Loads 📦 Package Includes 1 × 110 × 69mm 5V 180mA Mini Solar Panel Cell Module ⚠️ Note Output voltage and current depend on sunlight intensity and panel orientation. For battery charging applications, use a suitable solar charge controller or charging module. This panel is intended for low-power applications and may not provide sufficient power under low-light conditions. Product appearance may vary slightly depending on the manufacturing batch.
XH-M401 DC-DC Step Down Buck Converter Power Supply Module XL4016E1
[Step Down Buck Converter] ⚡ XL4016 12A DC-DC Step-Down Buck Converter Module Adjustable Power Supply 12A High Current • Adjustable Output • Up to 96% Efficiency • Ideal for Battery Charging & Power Supply Applications The XL4016 DC-DC Step-Down Buck Converter Module is a high-performance switching voltage regulator designed to efficiently convert higher DC input voltages into a stable, adjustable lower output voltage. Based on the XL4016 PWM Buck Converter IC, this module supports input voltages from 8V to 36V DC and provides an adjustable output voltage from 1.25V to 32V, making it suitable for a wide range of power supply applications. Capable of delivering up to 12A output current with conversion efficiencies of up to 96%, the module features built-in thermal shutdown, current limiting, and short-circuit protection for safe and reliable operation. Its compact design and excellent voltage regulation make it ideal for powering electronic projects, battery charging systems, LED lighting, industrial equipment, communication devices, and laboratory power supplies. ⭐ Features Based on the XL4016 high-performance buck converter IC Wide input voltage range of 8V–36V DC Adjustable output voltage from 1.25V–32V DC Supports output current up to 12A High conversion efficiency up to 96% Built-in thermal shutdown protection Built-in over-current protection Built-in output short-circuit protection Excellent line and load regulation Compact PCB design Suitable for battery charging and DC power applications 📋 Technical Specifications Product Type: DC-DC Buck Converter Module Model: XL4016 (XH-M401 / HW-439 / HW-674) Converter Type: Step-Down (Buck) Input Voltage: 8V–36V DC Output Voltage: 1.25V–32V DC (Adjustable) Maximum Output Current: 12A Maximum Conversion Efficiency: Up to 96% Load Regulation: ±0.5% Voltage Regulation: ±0.5% Switching Frequency: 180kHz Protection Features: Over-Current Protection Thermal Shutdown Protection Output Short-Circuit Protection PCB Size: 60 × 40 mm Operating Principle: PWM Step-Down Regulation 🔧 Applications Suitable for: Adjustable DC Power Supplies Lithium Battery Charging Lead Acid Battery Charging Solar Power Systems LED Drivers LCD Monitors LCD Televisions Portable Instruments Telecommunication Equipment Networking Equipment Robotics Projects Arduino Projects ESP32 Projects Industrial Automation DIY Electronics 📦 Package Includes 1 × XL4016 12A DC-DC Step-Down Buck Converter Module ⚠️ Note This is a step-down (buck) converter; the input voltage must always be higher than the required output voltage. Adjust the output voltage before connecting sensitive electronic devices. Product may be supplied as XH-M401, HW-439, or HW-674, depending on stock availability. All variants offer equivalent functionality.
Winway 18650 Lithium-Ion Rechargeable Battery 3.7V 2600mAh 9.62Wh
[Lithium Battery Cell] The Winway 18650 Lithium-Ion Rechargeable Battery is a high-performance cylindrical Li-ion cell designed to deliver reliable and long-lasting power for a wide range of electronic devices. With a nominal voltage of 3.7V, 2600mAh capacity, and 9.62Wh energy rating, it provides consistent power output for both high-drain and low-drain applications. Manufactured using premium lithium-ion cell technology, this battery offers excellent energy density, stable discharge performance, and long cycle life. Its standard 18650 form factor makes it compatible with most battery holders, chargers, and devices designed for 18650 cells. The Winway 2600mAh battery is widely used in rechargeable flashlights, emergency lights, battery packs, power banks, Bluetooth speakers, portable fans, solar lighting, DIY electronics, robotics, and various battery-operated devices. Designed for durability and dependable performance, this battery delivers excellent backup time while maintaining stable voltage throughout the discharge cycle. ⭐ Features High-quality 18650 Lithium-Ion rechargeable battery 2600mAh high-capacity cell Nominal voltage of 3.7V Energy rating of 9.62Wh Stable discharge performance High energy density Long charge and discharge cycle life Lightweight and compact cylindrical design Suitable for battery pack assembly Compatible with standard 18650 battery holders and chargers 📋 Technical Specifications Product Type: Lithium-Ion Rechargeable Battery Brand: Winway Battery Model: 18650 Nominal Voltage: 3.7V Nominal Capacity: 2600mAh Energy: 9.62Wh Battery Chemistry: Lithium-Ion (Li-ion) Cell Type: Rechargeable Form Factor: Cylindrical 18650 Diameter: Approx. 18mm Length: Approx. 65mm Weight: Approx. 45g Color: Green Rechargeable: Yes Made In: India Pack Quantity: 1 Piece 🔧 Applications Suitable for: Rechargeable Flashlights Emergency Lights Power Banks Bluetooth Speakers Portable Fans Solar Lighting Systems DIY Battery Packs Robotics Projects Arduino Projects ESP32 Projects Electronic Toys Portable Electronic Devices Medical Equipment (Compatible Models) Industrial Electronic Equipment 📦 Package Includes 1 × Winway 18650 Lithium-Ion Rechargeable Battery 3.7V 2600mAh ⚠️ Safety Instructions Use only a compatible Li-ion battery charger. Do not short-circuit, puncture, crush, or disassemble the battery. Do not expose the battery to fire, excessive heat, or water. Observe correct polarity during installation. Do not overcharge or over-discharge the battery. Store in a cool, dry place away from direct sunlight.
3.7V 700mAh 503035 Rechargeable Lithium Polymer (Li-Po) Battery for DIY Electronics, Robotics
[LiPo Cell] The 503035 3.7V 700mAh Rechargeable Lithium Polymer Battery is a compact and reliable power source designed for portable electronic devices and embedded applications. Manufactured using advanced Lithium Polymer (Li-Po) technology, it provides high energy density, lightweight construction, and excellent charge/discharge performance. In addition, the battery delivers a nominal voltage of 3.7V and a capacity of 700mAh, making it suitable for devices that require compact size with extended runtime. As a result, it is widely used in Bluetooth speakers, wireless headphones, GPS trackers, drones, robotics, IoT devices, portable medical equipment, and DIY electronics projects. Because of its slim profile, the battery can be easily integrated into compact electronic enclosures where space is limited. Furthermore, its low self-discharge rate and long cycle life ensure dependable performance over repeated charging cycles. The battery comes with pre-attached wires and a connector (connector type may vary by batch), allowing quick installation in compatible devices. Moreover, it supports safe charging using standard 3.7V Lithium Polymer battery chargers or BMS protection circuits. ⚠️ Note: Charge the battery only with a compatible Lithium Polymer charger or charging protection module. Do not short-circuit, puncture, overcharge, or expose the battery to high temperatures. 🔹 Key Features Rechargeable Lithium Polymer (Li-Po) battery High energy density Compact and lightweight design Stable 3.7V output 700mAh capacity Long charge/discharge cycle life Low self-discharge Pre-attached connection wires Suitable for portable electronic devices Reliable and safe performance 🔹 Technical Specifications Battery Type: Lithium Polymer (Li-Po) Model: 503035 Nominal Voltage: 3.7V Full Charge Voltage: 4.2V Capacity: 700mAh Battery Dimensions: Approx. 5 × 30 × 35 mm Rechargeable: Yes Charging Method: CC/CV (Constant Current / Constant Voltage) Standard Charge Voltage: 4.2V Protection Circuit: May vary depending on batch Operating Temperature: -10°C to +60°C Weight: Approximately 15–18g 🔹 Applications This battery is suitable for: Bluetooth speakers Bluetooth headsets Mini drones RC toys Robotics projects IoT devices GPS trackers Portable electronic devices DIY electronics projects Wearable electronics 🔹 Package Includes 1 × 503035 3.7V 700mAh Rechargeable Lithium Polymer Battery
702025 3.7V 400mAh rechargeable Battery for Drone, Toys, Gaming, Robotics bluetoorh Headset, Bluetooth Speaker
[LiPo Cell] The 702025 3.7V 400mAh Rechargeable Lithium Polymer Battery is a compact and high-performance power source designed for portable electronic devices requiring lightweight and reliable energy storage. Built using advanced Lithium Polymer (Li-Po) technology, it provides high energy density, low self-discharge, and consistent output voltage. In addition, the battery delivers a nominal voltage of 3.7V with a capacity of 400mAh, making it suitable for powering compact electronic devices and embedded systems. As a result, it is widely used in drones, Bluetooth speakers, Bluetooth headsets, wireless gaming accessories, robotics, GPS devices, wearable electronics, and DIY battery-powered projects. Because of its slim profile and lightweight construction, the battery can be easily integrated into space-constrained applications. Furthermore, it supports multiple charge and discharge cycles while maintaining stable performance and long service life. The battery includes a pre-attached connector with insulated leads for quick installation and safe operation. Moreover, its rechargeable design makes it an economical and environmentally friendly power solution. ⚠️ Note: Charge the battery only with a compatible 3.7V Lithium Polymer battery charger or BMS protection circuit. 🔹 Key Features Rechargeable Lithium Polymer (Li-Po) battery High energy density Compact and lightweight design Stable 3.7V output Long charge/discharge cycle life Low self-discharge rate Pre-attached connection wires Suitable for portable electronic devices Reliable and safe performance Ideal for DIY electronics projects 🔹 Technical Specifications Battery Type: Lithium Polymer (Li-Po) Model: 702025 Nominal Voltage: 3.7V Full Charge Voltage: 4.2V Capacity: 400mAh Battery Dimensions: Approx. 7 × 20 × 25 mm Rechargeable: Yes Protection Circuit: Yes Charging Method: CC/CV (Constant Current / Constant Voltage) Operating Temperature: -10°C to +60°C Weight: Approximately 6–7g 🔹 Applications This battery is suitable for: Mini drones RC toys Bluetooth headsets Bluetooth speakers Wireless gaming controllers Robotics projects GPS trackers Wearable electronics DIY electronic devices Portable rechargeable products
DHT11 Digital Temperature and Humidity Sensor Module 3.3V-5V for Arduino & Raspberry Pi
[Temperature Sensor] The DHT11 Digital Temperature and Humidity Sensor Module is a reliable and cost-effective sensor designed to measure ambient temperature and relative humidity. It combines a capacitive humidity sensing element and a thermistor with a built-in digital signal processing unit, providing calibrated digital output directly to microcontrollers. In addition, the DHT11 offers stable performance and excellent long-term reliability, making it suitable for environmental monitoring and automation applications. As a result, it is widely used in weather stations, smart home systems, greenhouse monitoring, HVAC systems, and educational electronics projects. Because the module includes the required pull-up resistor, interfacing with microcontrollers becomes simple and straightforward. Furthermore, only three connections are required: VCC, GND, and Data Output. The sensor operates from a wide voltage range of 3.3V to 5.5V DC, ensuring compatibility with Arduino, Raspberry Pi, ESP32, STM32, NodeMCU, and other development boards. Moreover, readily available libraries and example codes allow quick integration into projects. The DHT11 utilizes advanced digital signal acquisition technology and dedicated temperature-humidity sensing techniques to ensure accurate and dependable measurements. 🔹 Key Features Measures temperature and humidity simultaneously Calibrated digital signal output Low power consumption High reliability and long-term stability Capacitive humidity sensing technology Built-in pull-up resistor on module Compatible with Arduino, ESP32, Raspberry Pi, and STM32 Simple 3-wire interface Easy integration into IoT projects Compact and lightweight design 🔹 Technical Specifications Sensor Model: DHT11 Operating Voltage: 3.3V – 5.5V DC Output Type: Digital Serial Output Humidity Measurement Range: 20%RH – 90%RH Humidity Accuracy: ±5%RH Humidity Resolution: 1%RH Temperature Measurement Range: 0°C – 50°C Temperature Accuracy: ±2°C Temperature Resolution: 1°C Sampling Rate: 1Hz (One Reading Per Second) Long-Term Stability: < ±1%RH/Year Interchangeability: Fully Interchangeable Sensor Technology: Capacitive Humidity Sensor + Thermistor 🔹 Pin Configuration Pin 1 (VCC): 3.3V – 5.5V DC Power Supply Pin 2 (DATA): Digital Serial Data Output Pin 3 (GND): Ground 🔹 Applications This sensor module is suitable for: Arduino projects Raspberry Pi projects ESP32 projects IoT systems Weather monitoring stations Smart home automation Greenhouse monitoring HVAC control systems Environmental monitoring Educational electronics projects 🔹 Package Includes 1 × DHT11 Digital Temperature and Humidity Sensor Module
AC-DC 100-220V to 12V 1.3A 15.6W SMPS Power Supply Module Switching Power Board
[SMPS] The AC-DC 100-220V to 12V 1.3A 15.6W SMPS Power Supply Module is a compact switching power supply designed to provide a stable and regulated 12V DC output from standard AC mains input. With high conversion efficiency and built-in protection features, it is suitable for a wide range of electronic and industrial applications. In addition, the module accepts a broad 100V to 220V AC input range, making it compatible with various power systems. As a result, it can be used in DIY electronics, automation systems, LED lighting projects, CCTV installations, and embedded devices. Because of its efficient SMPS design, the module offers low power loss and reduced heat generation. Furthermore, the compact PCB layout allows easy integration into projects where space is limited. The power supply includes protection against overcurrent and short circuits, helping improve operational safety and reliability. Moreover, the regulated 12V output ensures stable performance for connected devices and electronic circuits. This power module is widely used in LED strips, surveillance systems, smart home devices, industrial control systems, communication equipment, and DIY electronics projects. 🔹 Key Features Wide AC input voltage range Stable regulated 12V DC output Maximum output current of 1.3A High-efficiency switching power supply design Compact and lightweight module Built-in overcurrent protection Built-in short-circuit protection Low heat generation Reliable and long-lasting performance Easy integration into electronic projects 🔹 Technical Specifications Product Type: AC-DC SMPS Power Supply Module Input Voltage Range: 100V – 220V AC Input Frequency: 50Hz – 60Hz Output Voltage: 12V DC Output Current: 1.3A Output Power: 15.6W Efficiency: Up to 86% Overcurrent Protection: Yes Short Circuit Protection: Yes Operating Temperature: -20°C to +80°C Dimensions: 96 × 32 × 16 mm Weight: Approximately 43g 🔹 Applications This SMPS module is suitable for: LED strip lighting CCTV camera systems Smart home devices Automation projects Industrial control systems Communication equipment Arduino projects ESP32 and IoT systems DIY electronics projects 🔹 Package Includes 1 × AC-DC 100-220V to 12V 1.3A 15.6W SMPS Power Supply Module
Single Side Adhesive Barley Insulation Paper Roll 65mm x 1 Meter for Lithium Battery Packs
[Insulation Paper] The Single Side Adhesive Barley Insulation Paper Roll is a premium electrical insulation material widely used in lithium-ion battery pack manufacturing and electrical insulation applications. Manufactured from high-quality cellulose fiber, it offers excellent dielectric properties, mechanical strength, and long-term reliability. In addition, the insulation paper features a single-sided adhesive backing that allows quick and secure installation on battery cells, terminals, and electrical components. As a result, it simplifies battery pack assembly and improves production efficiency. Because of its excellent heat resistance and electrical insulation characteristics, the paper helps prevent short circuits and protects battery cells from mechanical damage. Furthermore, the material provides good oil resistance and moisture absorption properties, making it suitable for demanding industrial environments. The flexible design allows easy cutting and shaping for custom battery pack configurations. Moreover, it is commonly used in lithium-ion battery manufacturing, electric vehicles, power tools, and industrial insulation applications. This insulation paper is widely used in battery packs, cell insulation, gasket manufacturing, automotive applications, and electrical equipment assembly. 🔹 Key Features Single-side adhesive insulation paper Excellent dielectric properties High mechanical strength Good heat resistance Oil-resistant material Moisture absorption capability Flexible and easy to cut Suitable for lithium battery packs Reliable electrical insulation Durable and long-lasting performance 🔹 Technical Specifications Product Type: Barley Insulation Paper Roll Material: Pure Cellulose Fiber Adhesive Type: Single Side Adhesive Color: Green Width: 65mm Length: 1 Meter Thickness: Less than 0.5mm Electrical Property: High Dielectric Strength Mechanical Strength: High Flexibility: Excellent Packaging Type: Roll 🔹 Applications This insulation paper is suitable for: Lithium-ion battery packs 18650 battery pack assembly Battery terminal insulation Cell paper machines Electric vehicle battery packs Power tool battery packs Automotive gasket applications Electrical insulation projects Industrial equipment insulation 🔹 Package Includes 1 × Single Side Adhesive Barley Insulation Paper Roll 65mm × 1 Meter
Micro USB 5V 1A Step-Up Boost Converter Power Bank Charging Module for 3.7V Lithium Battery
[Li-ion Rechargeable Battery Charger, Lithium Battery Protection Board] The Micro USB 5V 1A Step-Up Boost Converter Power Bank Charging Module is a versatile and reliable solution for building portable power banks and battery-powered electronic projects. Designed for use with a single 3.7V lithium-ion battery, the module integrates battery charging, protection circuitry, and a high-efficiency boost converter on a single compact PCB. In addition, the onboard boost converter efficiently converts the battery voltage to a regulated 5V USB output, making it suitable for charging smartphones, microcontroller projects, portable gadgets, and USB-powered devices. As a result, users can create compact and dependable portable power solutions with minimal external components. Because of its integrated protection functions, the module safeguards the battery against overcharging, over-discharging, and short circuits. Furthermore, LED status indicators provide clear visual feedback regarding charging and operating conditions. The compact design allows easy integration into custom battery packs, DIY power banks, portable electronics, and embedded systems. Moreover, the Micro USB charging interface ensures compatibility with widely available charging cables and adapters. 🔹 Key Features Micro USB charging interface Integrated lithium battery charging circuit Built-in 5V step-up boost converter Stable 5V USB output Supports single-cell 3.7V lithium-ion batteries Overcharge protection Over-discharge protection Short-circuit protection High conversion efficiency LED charging status indicators Compact and lightweight design 🔹 Technical Specifications Product Type: Power Bank Charging Module Charging Interface: Micro USB Input Voltage: 3.7V Lithium Battery Output Voltage: 5V USB Standard Maximum Output Current: 1A Supported Battery Type: Single Cell Lithium-Ion Battery (3.7V) Efficiency: Up to 92% Quiescent Current: Less than 100µA Charging Protection: Overcharge, Over-discharge, Short Circuit Protection Overcharge Protection Voltage: 4.2V Over-discharge Protection Voltage: 2.5V Charging Cut-off Current: 50mA Module Dimensions: Approx. 36mm × 17mm × 7mm PCB Thickness: 1.6mm Operating Temperature: -40°C to +85°C Status Indication: LED Charging Indicators 🔹 Applications This charging module is suitable for: DIY power banks Portable USB chargers Lithium battery projects Arduino power supplies ESP32 and IoT devices Portable electronics Rechargeable battery systems USB-powered gadgets 🔹 Package Includes 1 × Micro USB 5V 1A Step-Up Boost Converter Lithium Battery Charging and Protection Module
3V 100mA LED Filament 45mm COB Edison Bulb Filament
[COB LED] The 3V 100mA LED Filament 45mm is a flexible COB LED light source designed for decorative lighting, Edison bulb restoration, DIY lamps, and creative illumination projects. Available in a variety of colors, it delivers bright and uniform light output while maintaining low power consumption. In addition, the filament provides 360-degree illumination, closely replicating the appearance of traditional Edison-style incandescent filaments. As a result, it is widely used in decorative bulbs, custom lighting fixtures, model lighting, art installations, and creative electronics projects. Because of its flexible substrate design, the filament can be slightly bent to fit custom enclosures and unique lighting arrangements. Furthermore, it produces minimal heat during operation, making it safe for compact and enclosed lighting applications. The advanced COB LED structure ensures consistent brightness, excellent efficiency, and long service life. Moreover, the solderable metal terminals allow quick integration into DIY electronics and lighting projects. 🔹 Key Features Available in multiple colors Bright and uniform light output COB LED filament design Low power consumption Excellent energy efficiency Minimal heat generation 360° illumination pattern Lightweight and compact structure Easy solderable metal terminals Long operational life 🔹 Technical Specifications Product Type: COB LED Filament Operating Voltage: 2.8V to 3.2V DC Rated Voltage: 3V DC Forward Current: 100mA (Maximum) Power Consumption: Approximately 0.3W Brightness: Approximately 80–100 Lumens per Watt Filament Type: COB (Chip-on-Board) LED Filament Base Material: Flexible Polymer Substrate Connection Type: Solderable Metal End-Caps led Length: 45mm Total Length: 55mm Filament Diameter: Approximately 2.0mm Terminal Size: Approximately 2mm × 2mm Weight: Less than 1g Available Colors: Warm White, Cool White, Red, Blue, Green (subject to availability) 🔹 Mechanical Specifications Filament construction Durable polymer substrate Highly resistant to mechanical shock Lightweight design Easy soldering connection terminals Suitable for custom lamp and lighting assemblies 🔹 Applications This LED filament is suitable for: Edison bulb repair and replacement Decorative LED lamps Custom lighting fixtures Battery-powered lighting projects Art installations Scale models and dioramas Display and showcase lighting Wearable electronics DIY electronics projects Creative lighting applications 🔹 Package Includes 1 × 3V 100mA LED Filament 38mm (Selected Color)
Keltron 3300uF 25V Radial Electrolytic Capacitor High Performance Capacitor
[Through Hole Capacitor] The Keltron 3300uF 25V Electrolytic Capacitor is a high-performance aluminum electrolytic capacitor designed for energy storage, voltage filtering, and ripple suppression applications. It is widely used in power supply circuits, audio amplifiers, inverter systems, battery chargers, and industrial electronics. In addition, the capacitor provides excellent filtering capability by reducing voltage fluctuations and unwanted electrical noise. As a result, it helps improve circuit stability and enhances overall system performance. Because of its 3300uF high capacitance value, the capacitor is ideal for smoothing DC power rails and handling transient current demands. Furthermore, the 25V DC voltage rating makes it suitable for a variety of low-voltage electronic applications. The radial lead design allows easy PCB installation and secure mounting. Moreover, Keltron capacitors are known for their dependable quality, stable electrical characteristics, and long operational life. This capacitor is commonly used in audio amplifier power supplies, SMPS circuits, LED power supplies, inverter systems, battery chargers, and DIY electronics projects. 🔹 Key Features Genuine Keltron capacitor High capacitance 3300uF value Rated voltage of 25V DC Excellent ripple filtering performance Suitable for audio and power supply circuits Low leakage current Long operational life Radial lead through-hole design Reliable and stable performance 🔹 Technical Specifications Brand: Keltron Product Type: Electrolytic Capacitor Capacitor Type: Aluminum Electrolytic Capacitance: 3300uF Rated Voltage: 25V DC Tolerance: ±20% Mounting Type: Through-Hole (Radial Lead) Polarized: Yes Lead Type: Radial Operating Temperature: Up to 105°C (Series Dependent) Application: Filtering, Decoupling, Energy Storage 🔹 Applications This capacitor is suitable for: Audio amplifier circuits Power supply filtering SMPS circuits Inverter systems Battery chargers LED driver circuits Industrial electronics DIY electronics projects Electronic repair applications 🔹 Package Includes 1 × Keltron 3300uF 25V Radial Electrolytic Capacitor
16mm Ultrasonic Humidifier Atomizer Disc Piezoelectric Mist Maker Transducer Module 108KHz
[Ultrasonic Sensor] The 16mm Ultrasonic Humidifier Atomization Module is a high-efficiency piezoelectric transducer designed for mist generation and humidification applications. It operates using ultrasonic vibration technology to convert water into ultra-fine mist particles quickly and efficiently. In addition, the module works on the principle of ultrasonic cavitation, where high-frequency sound waves generate rapid compression and rarefaction inside the water. As a result, microscopic water droplets are released into the air as cool mist. Because of its 108KHz resonant frequency, the atomizer produces fine and uniform fog particles while maintaining low noise operation. Furthermore, the compact 16mm design allows easy integration into humidifiers, aroma diffusers, medical atomizers, and DIY mist generation systems. The atomization disc is built using durable piezoelectric material for long operational life and stable performance. Moreover, the module consumes very little power while providing efficient mist output. ⚠️ Note: This atomizer module requires a compatible ultrasonic driver board for operation. The driver circuit is not included in the package and must be purchased separately. This ultrasonic humidifier module is widely used in humidifiers, beauty care devices, medical atomization equipment, aroma diffusers, and DIY electronics projects. 🔹 Key Features 16mm ultrasonic atomizer disc High-frequency 108KHz operation Fine and uniform mist generation Low noise operation Small fog particle output Long operational life High stability performance Low power consumption Suitable for humidifier and mist maker projects 🔹 Technical Specifications Product Type: Ultrasonic Atomizer Transducer Module Atomizer Diameter: 16mm Operating Voltage: DC 3.7V –5V Resonant Frequency: 108KHz Resonant Impedance: < 2 Ohms Coupling Factor: > 52% Electrostatic Capacity: 3000pF Spray Quantity: > 110mL/h Operation Type: Ultrasonic Piezoelectric Atomization Fog Particle Type: Ultra-Fine Mist Noise Level: Low Noise Operation Material: Piezoelectric Ceramic + Metal 🔹 Working Principle The ultrasonic atomizer uses a piezoelectric transducer immersed in water. When driven at high frequency, the transducer creates rapid mechanical oscillations that generate cavitation bubbles and surface waves. Consequently, microscopic water droplets are released into the air as cool mist with minimal energy consumption. 🔹 Applications This ultrasonic atomizer module is suitable for many applications, including: Humidifiers Mist makers Aroma diffusers Medical atomizers Facial beauty equipment DIY humidification projects Decorative fog systems 🔹 Package Includes 1 × 16mm Ultrasonic Humidifier Atomization Sensor Module
6A 250V Black SPDT 3 Pin Mini Rocker Switch ON/OFF 2 Position Switch
[Mechanical Switches] The Black SPDT Mini Rocker Switch is a compact and reliable ON/OFF switch designed for electrical and electronic control applications. It features a Single Pole Double Throw (SPDT) configuration with two operating positions for smooth switching control. In addition, the rocker button includes clearly marked “I” and “O” symbols, allowing users to quickly identify the ON and OFF positions during operation. As a result, it provides convenient and user-friendly switching for various electronic projects and appliances. Because of its compact size and durable black plastic body, the switch is suitable for installation in small electronic enclosures and control panels. Furthermore, the sleek black finish gives a professional appearance for industrial and consumer applications. The rocker switch is rated for 6A at 250V AC and 10A at 125V AC, ensuring stable and reliable switching performance. Moreover, the snap-in mounting design allows fast and secure installation without additional screws or hardware. This mini rocker switch is widely used in power supplies, appliances, DIY electronics, industrial equipment, automation systems, and electrical control panels. 🔹 Key Features SPDT rocker switch design ON/OFF two-position operation Clear “I” and “O” markings Durable black body construction High current switching capacity Compact and lightweight design Easy snap-in installation Suitable for AC power control 🔹 Technical Specifications Switch Type: Mini Rocker Switch Contact Configuration: SPDT (Single Pole Double Throw) Positions: ON / OFF Rated Voltage: 250V AC / 125V AC Rated Current: 6A @ 250V AC Rated Current: 10A @ 125V AC Body Color: Black Mounting Type: Panel Mount / Snap-In Body Material: Plastic Contact Material: Iron Terminal Type: Pin Terminal Button Marking: I / O 🔹 Applications This rocker switch is suitable for many electronic and electrical applications, including: DIY electronics projects Power supplies Industrial equipment Automation systems Home appliances Control panels Electrical devices 🔹 Package Includes 1 × Black SPDT Mini Rocker Switch
6A 250V SPDT 3 Pin Mini Rocker Switch ON/OFF Red 2 Position Switch
[Mechanical Switches] The SPDT Mini Rocker Switch is a compact and reliable ON/OFF switch designed for electrical and electronic control applications. It features a Single Pole Double Throw (SPDT) configuration with two operating positions for easy switching control. In addition, the rocker button includes clearly marked “I” and “O” symbols, allowing users to quickly identify the ON and OFF positions during operation. As a result, it is convenient and user-friendly for both professional and DIY applications. Because of its compact size and durable body construction, the switch is suitable for installation in small electronic enclosures and control panels. Furthermore, the switch supports high current handling capability, making it ideal for AC power switching applications. The rocker switch is rated for 6A at 250V AC and 10A at 125V AC, ensuring stable and reliable switching performance. Moreover, the snap-in mounting design allows quick and secure installation without additional hardware. This mini rocker switch is widely used in power supplies, appliances, DIY electronics, industrial equipment, automation systems, and electrical control panels. 🔹 Key Features SPDT rocker switch design ON/OFF two-position operation Clear “I” and “O” markings Compact and lightweight body High current switching capacity Durable and reliable operation Easy snap-in installation Suitable for AC power control 🔹 Technical Specifications Switch Type: Mini Rocker Switch Contact Configuration: SPDT (Single Pole Double Throw) Positions: ON / OFF Rated Voltage: 250V AC / 125V AC Rated Current: 6A @ 250V AC Rated Current: 10A @ 125V AC Mounting Type: Panel Mount / Snap-In Body Material: Plastic Contact Material: Iron Color :Black and Red Terminal Type: Pin Terminal Button Marking: I / O 🔹 Applications This rocker switch is suitable for many electronic and electrical applications, including: DIY electronics projects Power supplies Industrial equipment Automation systems Home appliances Control panels Electrical devices 🔹 Package Includes 1 × SPDT Mini Rocker Switch
5V 100mA 0.5W Mini Solar Panel 70x70mm Polycrystalline DIY Solar Cell Charger
[Solar Panel] The 5V 100mA 0.5W Mini Solar Panel is a compact and efficient photovoltaic module designed for small solar power applications and DIY renewable energy projects. Made using high-quality polycrystalline silicon, this solar panel converts sunlight into usable electrical energy with reliable performance. In addition, the panel delivers a stable 5V output with up to 100mA current, making it suitable for charging small batteries, powering low-power devices, and educational electronics projects. As a result, it is widely used in portable solar applications, science experiments, and DIY electronic systems. Because of its lightweight and compact design, the panel can be easily installed in limited spaces. Furthermore, the durable epoxy surface improves protection against moisture and environmental conditions, helping ensure long-term outdoor use. The solar panel features excellent low-light performance and high conversion efficiency for improved energy generation. Moreover, the exposed copper connection pads allow easy soldering and quick integration into custom electronic projects. This mini photovoltaic panel is commonly used in solar DIY kits, battery chargers, garden lighting, educational projects, portable electronics, and renewable energy systems. 🔹 Key Features High-efficiency polycrystalline solar panel Stable 5V output voltage Lightweight and compact design Excellent low-light performance Durable epoxy-coated surface Easy soldering connection pads Waterproof and long-lasting structure Suitable for DIY and educational projects 🔹 Technical Specifications Product Type: Mini Solar Panel Material: Polycrystalline Silicon Output Voltage: 5V Output Current: 0–100mA Rated Power: 0.5W Dimensions: 70mm × 70mm × 3mm Surface Type: Epoxy Coated Connection Type: Copper Tape Pads Application Type: Solar Charging / DIY Projects 🔹 Applications This mini solar panel is suitable for many applications, including: DIY solar projects Small battery charging Educational electronics kits Portable solar devices Garden lighting systems Renewable energy experiments Low-power electronics projects 🔹 Package Includes 1 × 5V 100mA 0.5W Mini Epoxy Solar Panel
5 Pin Mini SPDT Relay 12V 10A 250V PCB Mount Electromagnetic Relay
[Relay Module, Relays] 12V PCB Mount Sugar Cube SPDT Relay – 5 Pin 10A The 12V PCB Mount Sugar Cube SPDT Relay is a compact Single Pole Double Throw (SPDT) electromagnetic relay designed for switching AC and DC electrical loads using a microcontroller, sensor, automation circuit, or other low-power control system. Its compact PCB-mount design makes it suitable for DIY electronics, home automation, security systems, switching circuits, motor control, lighting control, and embedded applications. The relay features a 12V DC coil and a 5-pin SPDT configuration consisting of two coil terminals, COM (Common), NO (Normally Open), and NC (Normally Closed) contacts. When the coil is energized, the internal contact switches between the NC and NO terminals. With contact ratings of up to 10A at 250V AC, 10A at 125V AC, 12A at 120V DC, and 10A at 28V DC, this relay is suitable for a wide range of electrical switching applications. ⭐ Key Features SPDT (Single Pole Double Throw) relay 12V DC coil Compact Sugar Cube design 5-pin configuration PCB mounting type 10A @ 250V AC contact rating 10A @ 125V AC contact rating 12A @ 120V DC contact rating 10A @ 28V DC contact rating Coil resistance: approximately 270Ω Approximately 45mA nominal coil current 50/60Hz frequency specification Fast switching response Suitable for microcontroller and sensor-controlled switching Ideal for automation and control applications 📋 Technical Specifications Product Type: PCB Mount Relay Relay Type: SPDT (Single Pole Double Throw) Contact Configuration: 1 Form C Number of Pins: 5 Coil Voltage: 12V DC Trigger Voltage: 12V DC Coil Resistance: 270Ω Nominal Coil Current: Approximately 45mA Frequency: 50/60Hz Maximum AC Load: 10A @ 250V AC Maximum AC Load: 10A @ 125V AC Maximum DC Load: 12A @ 120V DC Maximum DC Load: 10A @ 28V DC Operating Time: 10ms Release Time: 5ms Mounting Type: PCB Mount Contact Terminals: COM / NO / NC Coil Terminals: Coil End 1 / Coil End 2 🔌 Pin Configuration Coil End 1: One terminal of the 12V DC relay coil Coil End 2: Other terminal of the 12V DC relay coil COM: Common switching contact NO: Normally Open contact NC: Normally Closed contact When the relay coil is not energized, COM is connected to NC. When the 12V DC coil is energized, COM switches from NC to NO. 🛠️ How It Works The relay uses an electromagnetic coil to mechanically switch an electrical circuit. Applying 12V DC to the coil energizes the relay and changes the contact position. A load connected between COM and NC remains connected when the relay is inactive. A load connected between COM and NO remains disconnected until the relay coil is energized. This allows a low-power control circuit such as an Arduino, microcontroller, sensor, timer, or automation controller to control a higher-current AC or DC load. 🔧 Applications Arduino Projects Microcontroller Projects Sensor-Controlled Switching Home Automation Security Systems Lighting Control Fan Control Motor Control Pump Control Power Supply Switching Industrial Control Systems Embedded Electronics DIY Electronics Projects 📦 Package Includes 1 × 12V PCB Mount Sugar Cube SPDT Relay – 5 Pin 10A ⚠️ Precautions Use a suitable 12V DC supply for the relay coil. Do not exceed the specified contact voltage and current ratings. Check the COM, NO, NC, and coil terminals before wiring. Use suitable flyback protection when driving the relay coil from sensitive electronic circuits. Use appropriate suppression/protection components for inductive loads such as motors, solenoids, and coils. Provide sufficient PCB insulation and clearance when switching mains voltage. Disconnect power before changing or modifying wiring. Do not touch exposed mains-voltage terminals during operation.
TP4056 1A Li-Ion Lithium Battery Charging Module with Micro USB 3.7V Charger Board
[Li-ion Rechargeable Battery Charger, Lithium Battery Protection Board] The TP4056 1A Li-Ion Lithium Battery Charging Module – Micro USB is a compact and efficient charging board designed for charging single-cell 3.7V lithium-ion and lithium polymer batteries. It features an onboard Micro USB connector, allowing direct charging from USB power sources such as computers, adapters, and power banks. In addition, the module supports external power input through the IN+ and IN- pads, making it suitable for custom battery charging applications and DIY electronics projects. As a result, users can easily integrate the module into portable devices and battery-powered systems. Because of its compact size and lightweight design, the TP4056 module is ideal for space-limited applications. Furthermore, the onboard charging management IC provides stable charging performance with high accuracy and reliable battery protection. The charging current is set to 1A by default, but it can also be adjusted by changing the onboard programming resistor. Moreover, the module includes dual LED indicators for charging status and full-charge indication. This charging module is widely used in power banks, DIY battery chargers, portable electronics, IoT devices, robotics systems, and rechargeable battery projects. 🔹 Key Features TP4056 lithium battery charging IC Onboard Micro USB input interface Suitable for 3.7V Li-Ion and LiPo batteries Default 1A charging current Adjustable charging current support Dual LED charging status indicators Compact and lightweight design High charging accuracy and stable performance Easy integration into DIY projects 🔹 Technical Specifications Product Type: Lithium Battery Charging Module Charging IC: TP4056 Input Interface: Micro USB Input Voltage: 5V DC Battery Type: 3.7V Li-Ion / LiPo Battery Default Charging Current: 1A Adjustable Current Range: 100mA – 1000mA Charging Method: Constant Current / Constant Voltage Charging Indicators: Charging LED & Full Charge LED Mounting Type: PCB Module Body Material: FR4 PCB 🔹 Applications This TP4056 charging module is suitable for many electronic applications, including: DIY power banks Rechargeable battery projects Portable electronics Robotics systems IoT devices Battery charging circuits Arduino projects DIY electronics projects 🔹 Package Includes 1 × TP4056 1A Li-Ion Lithium Battery Charging Module – Micro USB