All products · 2 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
XH-W1219 12V Digital Temperature Controller Module with Dual LED Display & Waterproof NTC Sensor
[Relay Module, Temperature Sensor] 🌡️ XH-W1219 12V Digital Temperature Controller Module with Dual LED Display & Waterproof NTC Sensor Dual LED Display • 12V DC Operation • 10A Relay Output • Heating & Cooling Modes • Waterproof NTC Sensor The XH-W1219 12V Digital Temperature Controller Module is a high-precision thermostat controller designed for automatic temperature monitoring and control in heating and cooling applications. Powered by 12V DC, this module features a dual LED display that simultaneously shows the current temperature and set temperature, making operation more convenient than the popular W1209 controller. Equipped with a waterproof NTC 10K temperature sensor, the XH-W1219 accurately measures temperatures from -50°C to +110°C. The onboard 10A relay output can directly control heaters, cooling fans, pumps, compressors, and other electrical loads within its rated capacity. The module is based on a Nuvoton microcontroller, which stores all settings in non-volatile memory, ensuring that user configurations are retained even after power loss. It supports both Heating (H) and Cooling (C) modes, adjustable hysteresis, temperature calibration, delay start, and high-temperature alarm functions. Ideal for incubators, aquariums, refrigeration systems, greenhouse automation, HVAC equipment, battery temperature monitoring, and industrial automation, the XH-W1219 provides reliable and accurate temperature control in a compact module. ⭐ Features Dual LED display for simultaneous temperature and setpoint display Operates on 12V DC High-accuracy waterproof NTC 10K temperature sensor Temperature control range from -50°C to +110°C Supports Heating and Cooling modes Built-in 10A relay output Adjustable temperature hysteresis Temperature calibration function Adjustable relay delay start High-temperature alarm function Stores settings in non-volatile memory Easy configuration using three push buttons High measurement accuracy (0.1°C resolution) Based on a Nuvoton MCU Compact PCB design with mounting holes 📋 Technical Specifications Product Type: Digital Temperature Controller Module Model: XH-W1219 Operating Voltage: 12V DC Display: Dual 3-Digit LED (Current Temperature & Set Temperature) Temperature Sensor: Waterproof NTC 10K Thermistor Temperature Control Range: -50°C to +110°C Temperature Resolution: 0.1°C Temperature Calibration: -10°C to +10°C Relay Output: 10A (Maximum) Relay Contact Rating: Up to 120VAC 10A / 14VDC 10A Control Modes: Heating (H) / Cooling (C) Hysteresis Setting: 0.1°C to 30°C Delay Start: 0–10 Minutes High Temperature Alarm: -49°C to +110°C Memory: Non-Volatile Parameter Storage Controller: Nuvoton MCU Dimensions: Approx. 60 × 44 × 17 mm Weight: Approx. 22 g (may vary slightly by manufacturer) ⚙️ Parameter Functions Parameter Description P0 Heating (H) / Cooling (C) Mode Selection P1 Temperature Hysteresis (Return Difference) P2 Maximum Temperature Limit P3 Minimum Temperature Limit P4 Temperature Calibration P5 Relay Delay Start (0–10 Minutes) P6 High Temperature Alarm Setting 🔧 Applications Suitable for: Egg Incubators Aquarium Temperature Control Greenhouse Automation Refrigeration Systems Cooling Fans Heating Elements Water Heaters HVAC Systems Fermentation Equipment Battery Temperature Monitoring Industrial Automation Laboratory Equipment DIY Electronics Smart Home Projects Arduino & Raspberry Pi Projects (Relay Interface) 📦 Package Includes 1 × XH-W1219 12V Digital Temperature Controller Module 1 × Waterproof NTC 10K Temperature Sensor ⚠️ Note Operates only on 12V DC. The relay output is rated for 10A maximum. For higher-power loads, use an external contactor or relay. Sensor cable can be extended if required using appropriate wiring. Product appearance or PCB color may vary slightly depending on the manufacturing batch.
W1209 Digital Temperature Controller Thermostat Module with Display and Waterproof Temperature Sensor
[Temperature Sensor] XH W1209 12V Digital Temperature Control Module + Display and NTC Temp Sensor This is XH W1209 digital temperature controller Module W/ Display and NTC Waterproof Temperature Sensor. W1209 Mini thermostat Temperature controller is low-cost 12V Temperature controller with 7-segment display and 3 switch keypad for setting temperature and other parameters. The module features an NTC thermistor temperature sensing and has an accuracy of 0.1 C. The XH W1209 digital temperature controller Module W/ Display and NTC Waterproof Temperature Sensor is an incredibly low cost yet highly functional thermostat controller. With this module, you can intelligently control power to most types of electrical device based on the temperature sensed by the included high accuracy NTC temperature sensor. Although this module has an embedded microcontroller no programming knowledge is required. 3 tactile switches allow for configuring various parameters including on & off trigger temperatures. The onboard relay can switch up to a maximum of 240V AC at 5A or 14V DC at 10A. We can display current temperature in degrees Centigrade via its 3 digit seven segment display and the current relay state by an onboard LED. DISPLAYING THE CURRENT TEMPERATURE The thermostat will display the current temperature in °C by default. When in any other mode making no input for approximately 5 seconds will cause the thermostat to return to this default display. SETTING THE TRIGGER TEMPERATURE To set the trigger temperature press the button marked ‘SET’. The seven-segment display will flash. You can now set a trigger temperature (in °C) using the ‘+’ and ‘-‘ buttons in 0.1° increments. If we didn’t press any buttons for approximately 2 seconds the trigger temperature will be store and the display will return back to the current temperature. SETTING THE PARAMETERS To set any parameter first long press the ‘SET’ button for at least 5 seconds. The seven-segment display should now display ‘P0’. This represents parameter P0. Pressing the ‘+’ or ‘-‘ buttons will cycle through the various parameters (P0 to P6). Pressing the ‘SET’ button whilst any of these parameters are displayed will allow you to change the value for that parameter using the ‘+’ and ‘-‘ buttons. When finished setting a parameter press the set button to exit that option. If no buttons are pressed for approximately 5 seconds the thermostat will exit the parameter options and will return back to the default temperature display. SETTING THE COOLING OR HEATING PARAMETER P0 The parameter P0 has two settings, C and H. When setting to C (default) the relay will energize when the temperature is reached. Use this setting if connecting to an air-conditioning system. When set to H the relay will de-energize when the temperature is reached. Use this setting if controlling a heating device. SETTING THE HYSTERESIS PARAMETER P1 This sets how much change in temperature must occur before the relay will change state. For example, if set to the default 2oC and the trigger temperature has been set to 25oC, it will not de-energize until the temperature falls back below 23oC. Setting this hysteresis helps stop the thermostat from continually triggering when the temperature drifts around the trip temperature. SETTING THE UPPER LIMIT OF THE THERMOSTAT PARAMETER P2 This parameter limits the maximum trigger temperature that can be set. It is useful as a safety to stop an excessively high trigger temperature from accidentally being set by the user. SETTING THE LOWER LIMIT OF THE THERMOSTAT PARAMETER P3 This parameter limits the minimum trigger temperature that can be set. It is useful as a safety to stop an excessively low trigger temperature from accidentally being set by the user. SETTING TEMPERATURE OFFSET CORRECTION PARAMETER P4 Should you find there is a difference between the displayed temperature and the actual temperature; (for instance, if the temperature probe is on a long run of cable) you can make minor corrections to the temperature reading with this parameter. SETTING THE TRIGGER DELAY PARAMETER P5 To reach trigger temperature this parameter allows for delaying switching of the relay. The parameter can be set in one-minute increments up to a maximum of 10 minutes. SETTING THE HIGH-TEMPERATURE ALARM PARAMETER P6 Setting a value for this parameter will cause the relay to switch off when the temperature reaches this setting. The seven-segment display will also show ‘—‘ to indicate an alarm condition. The relay will not re-energize until the temperature falls below this value. The default setting is OFF.