All products · 15 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Out of stockQi Wireless Charging Module 15W
Qi-compatible wireless charging transmitter coil + receiver, 15W fast charge.
315MHz 4 Channel Wireless RF Remote Control Kit with Receiver Module (Non-Locking Mode)
[RF Module] 📡 315MHz 4 Channel Wireless RF Remote Control Kit with Receiver Module (Non-Locking Mode) 4 Channel RF Remote • 315MHz ASK Communication • 5V Receiver • Non-Locking Mode • Long Range Wireless Control The 315MHz 4 Channel Wireless RF Remote Control Kit is a reliable wireless control solution consisting of a 4-button RF transmitter and a super regenerative ASK receiver module. Operating at 315MHz, this kit is ideal for remote switching, automation, robotics, security systems, and DIY wireless control projects. The receiver module features four independent digital outputs (D0–D3) that correspond to the four buttons on the transmitter. When a button is pressed, the respective output pin goes HIGH, returning LOW immediately after the button is released. This Non-Locking (Momentary/Jog) operation makes the module perfect for applications requiring temporary switching such as electric door control, motor jogging, relay activation, and microcontroller interfacing. The receiver operates from a 5V DC supply and features a high-sensitivity ASK receiver with a Valid Transmission (VT) output pin for reliable signal detection. The transmitter uses a fixed-code encoder for secure communication and easy operation. Ideal for Arduino, ESP32, Raspberry Pi, AVR, PIC, industrial automation, wireless switching, and educational electronics projects. ⭐ Features 4-channel wireless RF remote control kit Operating frequency: 315MHz ASK (Amplitude Shift Keying) modulation Fixed-code RF transmitter Non-Locking (Momentary/Jog) operating mode Four independent digital outputs (D0–D3) High-sensitivity super regenerative receiver 5V DC receiver operating voltage VT (Valid Transmission) status output Compact PCB design Easy interface with microcontrollers Long wireless transmission range (environment dependent) Suitable for DIY and industrial automation 📋 Technical Specifications RF Transmitter Product Type: RF Wireless Remote Control Operating Frequency: 315MHz Number of Buttons: 4 Channels: 4 Modulation: ASK (Amplitude Shift Keying) Encoding Type: Fixed Code Operating Mode: Non-Locking (Momentary) Power Supply: 12V A23 Battery (Not Included) RF Receiver Module Operating Voltage: 5V DC Operating Frequency: 315MHz Receiver Type: Super Regenerative ASK Receiver Receiver Sensitivity: -98dBm Output Channels: D0, D1, D2, D3 VT Output: Yes (Valid Signal Output) Antenna Connection: External ANT Pin Recommended Antenna Length: Approx. 17cm (Quarter-Wave) Module Dimensions: Approx. 41 × 22 × 7 mm Receiver Pin Configuration VT – Valid Signal Output D3 – Channel 4 Output D2 – Channel 3 Output D1 – Channel 2 Output D0 – Channel 1 Output +5V – Power Input GND – Ground ANT – External Antenna Connection 🔧 Operating Modes Non-Locking (Momentary/Jog Mode) Press a button → Corresponding output goes HIGH. Release the button → Output immediately returns LOW. Ideal for momentary control applications. Note: This product is supplied in Non-Locking Mode only. 🔧 Applications Suitable for: Arduino Projects ESP32 Projects Raspberry Pi Projects Wireless Relay Control Home Automation Industrial Automation Remote Door Control Electric Door Locks Wireless Switching Robotics Motor Control Lighting Control Alarm Systems Security Systems DIY Electronics Educational Projects 📦 Package Includes 1 × 4-Button 315MHz RF Wireless Remote Control 1 × 315MHz Super Regenerative Receiver Module ⚠️ Note Battery is included. A 12V A23 battery is required for operation. Avoid bending or touching the receiver's onboard inductor (copper coil), as this may affect receiver sensitivity. Wireless operating range depends on antenna quality, obstacles, and surrounding RF interference. Product appearance may vary slightly depending on the manufacturing batch.
HC-05 6pin Bluetooth Module with Button
[Bluetooth Module] HC-05 Bluetooth Module Are you in search of an HC-05 Bluetooth Module, a versatile and cost-effective solution for your wireless communication needs? Look no further. This Bluetooth module offers seamless wireless communication for a wide range of applications, from GPS navigation systems to water and electricity meter readings. Whether you're an electronics enthusiast, a DIY hobbyist, or a professional looking for competitive pricing, this module is designed to meet your requirements. The HC-05 Bluetooth Module lets you switch between Master and Slave modes with ease using AT Commands, and it comes pre-configured in Slave Mode. Its compatibility with devices such as phones, laptops, and microcontrollers ensures hassle-free connectivity. With a USART interface, it's a perfect fit for microcontrollers supporting USART communication. Plus, you can configure its settings effortlessly using the command mode. Ideal for DIY projects and data exchange, this Bluetooth module provides LED feedback for seamless operation, giving you the best bang for your buck. Buy the HC-05 Bluetooth Module today and enjoy top-notch wireless communication at a competitive price. The HC-05 Bluetooth Module with Baseplate is a slave-only device. This means that it can connect to most phones and computers with Bluetooth but it cannot connect to another slave-only device such as keyboards and other HC-06 modules. To connect with other slave devices a master module would be necessary such as the HC-05 module ,which can do both master and slave. The slave mode in HC-05 Bluetooth cannot initiate a connection to another Bluetooth device but can accept connections. Master mode can initiate a connection to other devices. Key Features: Working current: matching for 30 mA, matching the communication for 8 mA. With the computer and Bluetooth adapter, PDA, seamless connection equipment. Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards. Potter default rate of 9600, the user can be set up. Bluetooth protocol: Bluetooth Specification v2.0+EDR Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps. Security: Authentication and encryption. Profiles: Bluetooth serial port. HC-05 Bluetooth Module Pin Diagram: HC-05 Bluetooth Module Pin Description: Pin Number Pin Name Description 1 Enable / Key This pin is used to switch between command mode (set low) and Data Mode (set high). The default setting of this HC 05 Bluetooth module is Data Mode. 2 Vcc This pin can be used to power the Bluetooth module. It has an operating voltage of +5V DC. 3 Ground Connect the module's ground pin to the Microcontroller’s Ground Pin (GND). 4 TX – Transmitter Sends serial data to the MCU. This pin will distribute all Bluetooth data in the form of serial data to the Microcontroller. 5 RX – Receiver Obtain Serial Data. This pin will transmit all serial data that is provided to it over Bluetooth. 6 State The on-board LED attached to the state pin can be used as feedback to see if Bluetooth is functioning properly. 7 LED Indicates the status of Module Blink once in 2 sec: Command Mode Repeated Blink: Waiting for connection in Data Mode Blink twice in 1 sec: Connection successful in Data Mode 8 Button Used to control the Key/Enable pin to switch between Data Mode and command Mode HC-05 Default Values: Bluetooth Name: “HC-05” Password: 1234 or 0000 Communication: Slave Mode: Data Mode Data Mode Baud Rate: 9600, 8, N, 1 Applications Can be used for wireless communication between two microcontroller units. Communicate with Laptop mobile phones etc. Data Logging Wireless Robots DIY Home Automation Projects GPS-based DIY projects. Specifications: Serial communications 9600-115200bps Frequency 2.4~2.524 GHz Power Supply 5VDC Operating Current 30mA Range <100m Dimensions 30mm x 14mm x 2.2 mm Weight 5 grams Package Includes: 1 x HC-05 Bluetooth Module
3.7V 500mAh 14500 Lithium-Ion Battery without Tip Top Cap
[Lithium Battery Cell] Product Description The 3.7V 500mAh 14500 Lithium-Ion Rechargeable Battery (AA Size) is a compact and powerful energy source designed for high-performance portable devices. With a flat-top terminal and 500mAh capacity, this Li-ion cell provides reliable, long-lasting power for your electronics and DIY projects. Ideal for use in RC transmitters, receivers, flashlights, toys, and DIY electronic projects, it offers excellent efficiency and rechargeability compared to standard AA batteries. Its cylindrical design ensures compatibility with most 14500 battery holders or can be soldered directly into circuits. Features Voltage: 3.7V Capacity: 500mAh Battery Type: Lithium-Ion (Li-ion) Shape: Cylindrical (AA Size – 14500) Terminal Type: Flat Top High performance and long cycle life Lightweight and compact design Compatible with most 14500 battery holders Environment-friendly and rechargeable Applications RC transmitters and receivers Flashlights and LED torches Hobby electronics and DIY projects Battery-powered toys and gadgets Power banks and small embedded systems Package Includes 1 × 3.7V 500mAh 14500 Lithium-Ion Rechargeable Battery (Flat Top, without Tip Cap)
Out of stock32700 32650 3.2V Rechargeable 6000mAh LifePO4 Battery Cell for EV
[LiFePO4 Battery Cell] 32700 32650 3.2 V 6000 MAH LiFePO4 Battery This Standard 32700 32650 3.2 V Rechargeable 6000mAh LifePO4 Battery Cell is a single cell powerful battery cell with a massive 6000 mAh capacity. This LifePO4 battery is very convenient to install in your project where 3.2 Volt with high capacity is needed. The Standard 6000mAh 3.2V Rechargeable LifePO4 Battery is a source of power for various portable devices including flashlights, hobby transmitters, and receivers, etc. This Battery can be the best Replacement to the normal Non-Rechargeable AA Battery used in many applications such as in RC Transmitter/Reciever Remote, which can make your flight driving experience very cost-effective and efficient in terms of power output than that of conventional AA batteries. IMPORTANT: Never completely discharge the LifePO4 battery ( below 2.5V under load ). Charge fully to 4.2V before first use. Never attach any metal moving part like a magnet to the battery contact. Never use force to install (insert) LifePO4 battery. Do not use old and new battery cells together. Use only a high-quality battery charger. Do not expose to heat. Do not short (connect) positive (top), and negative (bottom) battery terminals (contacts). Keep battery that is not in use in the plastic holder (or any insulating [plastic] container). Do not charge the battery over 4.22V (another reason to use a high-quality battery charger). Don’t charge unattended. Do not store your LifePO4 batteries fully charged (for an extended period of time). Store in a cold and dry place at approximately 3.7V (storage charge). After the battery is discharged-don’t leave it discharged, charge it as soon as possible. FEATURES: Shape: Cylindrical Battery Battery Type: Lithium-Ion Rechargeable Battery High performance and capacity Flat top to suit many devices fitting PACKAGE INCLUDES: 1 x 32700 or 32650 3.2 V Rechargeable 6000mAh LifePO4 Battery Cell for EV. Note: Color and Print on the Cells may vary with every lot. We ship it randomly
DC5V Humidifier USB Spray Module DIY Incubation Experiment Equipm 108KHz(mist maker)
[Ultrasonic Sensor] Description This DC Ultrasonic Humidifiers Power Circuit Board with Atomizing Chip Moisture Film Humidification atomization machine consists of an atomization plate tablet with a diameter of 20mm. This Ultrasonic Humidifier Piezoelectric Transmitter module works on the principle of cavitation produced by sound waves. Just provide the DC 3V to 5V power supply it will turn into a mini ultrasonic atomizer. As sound waves contain compression and rarefaction. Due to extremely rapid movement, water droplets can no longer sustain their liquid state and get converted into vapor immediately. This vibration is produced by a piezoelectric filament. Tags, USB Humidifier Atomization Driver Board PCB Circuit Board 5V Spray Incubation, Tags, OEM/ODM Available Mini Humidifier USB spray module humidifier pcb circuit board for DIY kit Incubation Experiment Equipment, USB Humidifier Atomization Driver Board PCB Circuit Board 5V Spray Incubation, 5V DIY Ultrasonic Piezoelectric Humidifier Moisture Atomizing Chip Mist maker circuit board. Features Come with a driver Power-ON trigger work 108KHz high-frequency oscillator Micron level aperture The glazed surface of the atomized sheet Features/Specs: Product Name: 108KHz 20mm USB Humidifier Work Voltage: DC 4.5V~5.0V Work Power:2W Work Frequency:108KHz(+/-3KHz) Power Type: Female USB Socket Diameter without rubber ring:16mm Diameter with rubber ring:20mm Spray Diameter:5um Spray Hole:740 holes Spray speed:50ml/h Work Temperature:0℃ ~ 85℃ Work Humidity:10%~90%RH Driver Size:35*19*15mm Length: 35 mm Width: 19 mm Height: 15 mm Weight: 10 gm Application: Humidifier | mist maker Beauty care for facial massager Medical liquid atomizing Equipment Package Includes: 1pc x Humidifier Driver Bord 1pc x 16mm Atomizer Plate 1pc x Cotton Stick Stand 1pc x Cotton Stick
Out of stockBlack Plastic DC24V 20MM 12LED Air Humidifier Mist Maker Nebulizer
[Ultrasonic Sensor] This is a DC24V 20MM 12LED Alloy Air Humidifier Mist Maker Nebulizer. Buy this powerful DC 24V Ultrasonic Humidifier device suitable for atomization with a plate diameter of 10 mm. It is mostly in demand for fish pot and decoration purposes in households. It’s a simple plug-and-play module in which you just have to deep down the module in water and Supply 24 volt DC supply directly from the battery or power supply Adapter and it will start working. Additionally, this 24v 12 Colourful LED Ultrasonic Humidifier 12 LED Mist Maker Fogger comes with 12 Waterproof LED with 3 different colours glowing alternately which adds the colourful mist to your decoration The fully waterproof module has a 5mm DC female jack to connect the 24V input power supply with a 1-meter long cable. Instruction to use: Deep the module in the water keeping 4 to 5 cm water level above the device Connect the power supply of 24V DC 1AMP and enjoy the fog. Use power supply at least with 1AMP output for best performance Do not deep it in water more than 5cm for maximum fog output. How does it work? Ultrasonic Humidifier Piezoelectric Transmitter module works on the principle of cavitation produced by sound waves. Just provide the power supply it will turn into an ultimate ultrasonic atomizer. Features: Huge amount of humidification High-frequency vibration produces 350ml of mist per minute, humidifying all-day Wide Application Supporting use bonsai crafts, fish tank water tanks, DIY crafts and ect. Self-contained water level sensor Automatically power off with water shortage to prevent burning of the atomizer Package Includes: 1 x DC24V 20MM 12LED Ultrasonic Humidifier Mist Maker
5V 1A Wireless Power Supply Transmitter Receiver Charging Coil Module
[Induction Module] Wireless Charger Module Inductive Charger Transmitter + Receiver Power Supply Module DC 5 V 1A This product is for the current wireless charging various series of small electronic products, and power development and design is made with a small size, extremely easy to use, high efficiency, low cost features primarily for mobile electronics products such as: cell phones, game machine, fish tank, MP3, MP4, adult products, digital cameras, electric shavers, machine learning, medical supplies and other products of underwater applications. As a result of non-contact charging power supply, make the product completely sealed, waterproof and dustproof, increase the life of the product easier to use. Features: Input voltage: 9 ~ 12V Maximum load current: 1.3A Receives the output voltage and current: 5V / 2A, 12V / 700mA Transmitting coil size: diameter 43mm, thickness 2.3mm Transmitter module size: 18mm * 8.5mm * 15mm Receiver Module size: 10mm * 25mm * 3mm Receiving coil size: diameter 43mm, thickness 1.2mm Receive the best distance: 3 ~ 6mm Includes: Power Transmitter Power Receiver
DC 24V 16mm Super Ultrasonic Mist Maker Humidifier Atomizer 12LED Alloy
[Ultrasonic Sensor] 24V Color Changing Humidifier Ultrasonic Mist Maker Water Pond Atomizer Air Humidifiers 12 LED Buy this powerful DC 24V Ultrasonic Humidifier device suitable for atomization with a plate diameter of 20 mm. It is mostly in demand for fish pot and decoration purposes in households. It’s a simple plug-and-play module in which you just have to deep down the module in water and Supply 24 volt DC supply directly from the battery or power supply Adapter and it will start working. Additionally, this 24v 12 Colourful LED Ultrasonic Humidifier 12 LED Mist Maker Fogger comes with 12 Waterproof LED with 3 different colours glowing alternately which adds the colourful mist to your decoration The fully waterproof module has a 5mm DC female jack to connect the 24V input power supply with a 1-meter long cable. Instruction to use: Deep the module in the water keeping 4 to 5 cm water level above the device Connect the power supply of 24V DC 1AMP and enjoy the fog. Use power supply at least with 1AMP output for best performance Do not deep it in water more than 5cm for maximum fog output. How does it work? Ultrasonic Humidifier Piezoelectric Transmitter module works on the principle of cavitation produced by sound waves. Just provide the power supply it will turn into an ultimate ultrasonic atomizer. Features: Huge amount of humidification High-frequency vibration produces 350ml of mist per minute, humidifying all-day Wide Application Supporting use bonsai crafts, fish tank water tanks, DIY crafts and ect. Self-contained water level sensor Automatically power off with water shortage to prevent burning of the atomizer Package Includes: 1 x DC24V 16MM 12LED Alloy Air Humidifier Mist Maker Nebulizer
Out of stockTCRT5000 DUAL LINE TRACKING SENSOR MODULE
[IR and PIR Sensors] This IR reflective sensor Module TCRT5000 IR Sensor is used to detect colour and distance. This sensor module consists on an IR transmitter & an IR receiver. IR Transmitter continuously emits IR signal which is then reflected by an obstacle and is then detected by the IR receiver. TCRT5000 Infrared Reflective Sensor Module is often used in line following robots ,object sorting Robot because this module can sense if a surface is white or black. The measuring distance range from 1mm to 8mm, and the central point is about 2.5mm. There is also an on-board potentiometer to adjust the sensitivity. The infrared diode will emitting the infrared continually when the module is powered ON, when the emitted infrared light has not been reflected or the strength is not big enough, the receiver diode will in the off state and output pin i.e. DO will be LOW. Description of Line Tracking sensor TCRT5000L:- Main chip: LM393, Designed with reflected infrared sensor, indicator light. Built in a potentiometer for sensitivity control. On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L Support 5 V / 3.5 V voltage input On-board signal output instructions, output is high effective signal at the same time, the indicator lamp light output signal can be directly and single-chip microcomputer IO connection & mid dot; Signal detection sensitivity can adjust Reserve all the way more circuits (P3 voltage drawn) using TCRT5000 infrared reflection sensor test reflection distance: 1 mm to 25 mm Operation voltage: 3.5v-5V Operation current: >15mA wide voltage LM393 comparator output form: digital switch output (0 and 1) a fixed bolt hole, convenient installation. Features of Line Tracking sensor TCRT5000:- Product Name : Infrared Obstacle Avoidance Sensor Module; Module Model : TCRT5000; Working Voltage : DC 3.5-5V Output Channel : 0/1; Detect Distance : 1-25mm; Focal Distance : 2.5mm Chipset : LM393; PCB Size : 32 x 14mm/1.3″ x 0.55″ (L*W) Total Size : 38 x 14 x 18mm/1.5″ x 0.55″ x 0.7″(L*W*H); Material : Electric Part Package Content : 1 x Infrared Obstacle Avoidance Sensor Module
Out of stockDC 24V 36mm Super Ultrasonic Mist Maker Humidifier Atomizer
[Ultrasonic Sensor] if you are wandering to make a device that is automatically used to increase room humidity levels by adding water vapor to the air. then this sensor is needed for you. This sensor works by transposing high-frequency sound waves into mechanical energy that is transferred into a liquid, creating standing waves. Buy this powerful DC 24V Ultrasonic Humidifier device suitable for atomization with a plate diameter of 10 mm. It is mostly in demand for fish pot and decoration purposes in households. It’s a simple plug-and-play module in which you just have to deep down the module in water and Supply 24 volt DC supply directly from the battery or power supply Adapter and it will start working. The fully waterproof module has a 5mm DC female jack to connect the input power source with a 1-meter long cable. Instruction to use: Deep the module in the water keeping 4 to 5 cm water level above the device Connect the power supply of 24V DC 1AMP and enjoy the fog. Use power supply at least with 1AMP output for best performance Do not deep it in water more than 5cm for maximum fog output. How does it work? Ultrasonic Humidifier Piezoelectric Transmitter module works on the principle of cavitation produced by sound waves. Just provide the power supply it will turn into a mini ultrasonic atomizer. Features: Plug and Play Device Fully waterproof and Shockproof 1-meter long cable provides ease for connections Universal 5 mm DC Female jack Low noise operation. Small fog particles. Long operation life. High stability. High Conversion Efficiency. Low Impedance Stable Waveform. Low Dielectric Loss. Strong Corrosion Resistance. Package Includes: 1 x DC 24V 36mm Super Ultrasonic Mist Maker Humidifier Atomizer
433Mhz RF Transmitter With Receiver Kit For Arduino ARM MCU Wireless
[RF Module] This is a 433Mhz RF transmitter with a receiver kit for Arduino ARM MCU wireless. It can be used as a Remote control switch, electric doors, shutter doors, windows, remote control socket, remote control LED, remote control stereo, and alarm systems. Specifications for Receiver module: Operating voltage: DC5V Quiescent Current: 4mA Receiving frequency: 433.92MHZ Receiver sensitivity: -105DB Specifications for transmitter module: Launch distance:20-200 meters (different voltage, different results) Transfer rate: 4KB / S Operating mode: AM Transmitting power: 10mW Transmitting frequency: 433M Pinout from left-right: (DATA; VCC; GND) Operating voltage :3.5-12V Applications: Remote Controls Automation System Wireless Security System Sensor Reporting Car Security System Remote Keyless Entry Package Includes: 1 x Receiver module 1 x Transmitter
Out of stock32650/32700 3.2V Rechargeable 6000mAh LifePO4 Battery Cell for Solar
[LiFePO4 Battery Cell] The 32700 / 32650 3.2V 6000mAh LiFePO4 Battery Cell is a high-performance rechargeable lithium iron phosphate (LFP) battery designed for applications requiring stable voltage, long cycle life, and high current capability. With a massive 6000mAh capacity, this cylindrical battery provides reliable and long-lasting power for solar systems, RC transmitters, DIY battery packs, portable devices, backup systems, and industrial applications. LiFePO4 chemistry offers superior safety, thermal stability, and longer cycle life compared to traditional lithium-ion batteries. Datasheet: Click here 🔹 Key Features Nominal Voltage: 3.2V High Capacity: 6000mAh Lithium Iron Phosphate (LiFePO4 / LFP) chemistry Long cycle life (2000+ cycles typical) High thermal stability & improved safety Low self-discharge rate Flat-top design Suitable for high-drain applications 🔹 Technical Specifications Battery Type: LiFePO4 (Lithium Iron Phosphate) Model Size: 32700 / 32650 Nominal Voltage: 3.2V Fully Charged Voltage: 3.6V – 3.65V ⚠ (Not 4.2V) Capacity: 6000mAh Discharge Cutoff Voltage: 2.5V Cycle Life: 2000+ cycles Shape: Cylindrical Terminal Type: Flat Top Chemistry: LFP 🔹 Applications Solar energy storage 4S 12.8V LiFePO4 battery packs RC transmitters / receivers Electric vehicles & scooters DIY power banks Backup power systems Portable electronics Industrial battery packs 🔹 Package Includes 1 × 32700 or 32650 3.2V 6000mAh LiFePO4 Battery Cell ⚠ Color and print may vary by batch. ⚠ IMPORTANT SAFETY INSTRUCTIONS Never discharge below 2.5V under load. Charge only to 3.65V maximum. Use LiFePO4 compatible charger only (3.6V/3.65V CC-CV type). Do not short-circuit terminals. Do not mix old and new cells. Do not expose to heat or fire. Store at approx 3.2V–3.3V (storage voltage) in cool dry place. Charge immediately after deep discharge. Never charge unattended. ⚠ Do NOT charge to 4.2V — this is for Li-ion cells, NOT LiFePO4.
Out of stockE18-D80NK Adjustable Infrared Sensor Switch 3-80cm
[IR and PIR Sensors, Sensors] The E18-D80NK Adjustable Infrared Sensor Switch 3-80cm is a set of transmitter and receiver in one of the photoelectric switch sensor. The detection distance can be adjusted according to the demand. The sensor has a detection range of 3-80cm. The Adjustable Infrared Sensor Switch is small, easy to use, inexpensive, easy to assemble and can be widely used in a robot to avoid obstacles, interactive media, industrial assembly lines, and many other occasions. The switching signal output differs in accordance with the obstacles. It remains high when no obstacles and remains low when there are obstacles. There is a bright light behind the probe to detect the scope of 3cm – 80cm. Connection Red wire: +5V Green wire: GND Yellow wire: Digital output OR Brown wire: +5V Blue wire: GND Black wire: Digital output. Features : Diffuse reflective type. Digital output. Adjustable detection distance. Low consumption. Compact size. Package Includes : 1 x E18-D80NK Adjustable Infrared Sensor Switch 3-80cm.
HC-SR04-Ultrasonic Range Finder
[Ultrasonic Sensor] This HC-SR04-Ultrasonic Range Finder is a very popular sensor that is found in many applications where it requires measuring distance and detecting objects. The module has two eyes like projects in the front which forms the Ultrasonic transmitter and Receiver. The HC-SR04 ultrasonic sensor uses sonar to determine the distance to an object like bats or dolphins do. This Ultrasonic Sensor module is a transmitter, a receiver, and a control circuit in one single pack!! It has very handy and compact construction. It offers excellent range accuracy and stable readings in an easy-to-use package. Its operation is not affected by sunlight or black material like Sharp rangefinders are (although acoustically soft materials like cloth can be difficult to detect). The Trigger and the Echo pins are the I/O pins of this module and hence they can be connected to the I/O pins of the microcontroller/Arduino. When the receiver detects the return wave the Echo pin goes high for a particular amount of time which will be equal to the time taken for the wave to return back to the sensor. Ultrasonic Ranging Module HC-SR04 provides 2cm-400cm non-contact distance sensing capabilities, Ranging accuracy up to 3mm. Wiring +5V(positive) Trig(control) Echo(receive) GND(negative) Features : Measures the distance within a wide range of 2cm to 400cm Stable performance Accurate distance measurement High-density Small blind distance Package Includes: 1 x HC-SR04-Ultrasonic Range Finder