All products · 109 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Type-C PD/QC/AFC Fast Charge Decoy Trigger Module – 5V/9V/12V/15V/20V Fixed Output
[Step UP Buck Converter] Type-C PD/QC/AFC Fast Charge Decoy Trigger Module – 5V/9V/12V/15V/20V Fixed Output The Type-C PD/QC/AFC Fast Charge Decoy Trigger Module is a compact USB Type-C power negotiation module designed to request a selected voltage from compatible USB Type-C fast chargers and power banks. It supports QC 2.0/3.0, AFC, PD 2.0 and PD 3.0 protocols, allowing compatible USB-C power sources to provide higher voltage outputs such as 5V, 9V, 12V, 15V or 20V. This module is useful for DIY electronics projects where a USB Type-C PD/QC charger needs to be used as a DC power source for equipment that does not have native USB-C fast-charging support. ⭐ Key Features USB Type-C fast-charge decoy/trigger module Supports PD 2.0 / PD 3.0 Supports QC 2.0 / QC 3.0 Supports Samsung AFC Fixed selectable voltage output Supports 5V / 9V / 12V / 15V / 20V output options Negotiates the required voltage from a compatible charger Suitable for USB-C power banks and PD adapters LED indicators for operating/status indication Compact and lightweight PCB design Useful for DIY power supply and electronics projects Plug-and-play operation with compatible USB-C power sources 📋 Technical Specifications Product Type: USB Type-C Fast Charge Trigger / Decoy Module Input Connector: USB Type-C Input Source: USB-C PD/QC/AFC compatible charger or power bank Supported Protocols: PD2.0, PD3.0, QC2.0, QC3.0, AFC Output Voltage: 5V / 9V / 12V / 15V / 20V Output Type: DC Voltage Selection: Fixed/selectable depending on module version Indicator: LED status indicators Application: DC power conversion and fast-charge voltage triggering 🔧 Applications Converting USB-C PD chargers into DC power supplies Powering DIY electronics projects Arduino and microcontroller projects LED applications Portable electronic equipment DIY laboratory power supplies DC motors and other suitable loads Router/modem power applications where the required voltage matches Powering electronics from USB-C PD power banks Replacing conventional DC adapters with USB-C PD sources 🛠️ How It Works The module does not boost the USB voltage itself. Instead, it communicates with a compatible USB-C power source and sends the required PD/QC/AFC negotiation request. For example, when connected to a compatible PD charger, the module can request: 5V → 9V → 12V → 15V → 20V The charger then provides the negotiated voltage at the module's DC output. ⚠️ Important Notes The connected USB-C charger or power bank must support the required fast-charging protocol and voltage. A standard 5V-only USB charger cannot normally provide 9V/12V/15V/20V through this module. Always verify the selected output voltage with a multimeter before connecting your device. Do not connect a device that requires a lower voltage than the selected output. The module is a trigger/decoy board, not a standalone DC-DC boost converter. Maximum available output power/current depends on the connected USB-C charger/power bank and the module's specifications. Do not short the output terminals. 20V output can damage 5V/9V/12V-only electronics if the wrong voltage is selected. Exact selectable voltages and current capability can vary between board versions. 📦 Package Includes 1 × Type-C PD/QC/AFC Fast Charge Decoy Trigger Module
UPS Rocker Switch Red 6 Pin ON-OFF-ON with Indicator
[Mechanical Switches] UPS Rocker Switch Red 6 Pin ON-OFF-ON with Indicator – BR34 The UPS Rocker Switch Red 6 Pin ON-OFF-ON with Indicator (BR34) is a durable rocker switch designed for reliable switching applications. It features a 6-pin DPDT configuration, copper contacts and a large rocker design with an indicator light for convenient operation and status indication. With a rated voltage of up to 250V and a rated current of 6A, it is suitable for UPS systems, power strips, stabilizers, water dispensers, coffee machines, automobiles, USB hubs, machinery and other electrical equipment. ⭐ Key Features 6-pin rocker switch ON-OFF-ON switching function DPDT switch configuration Red color Built-in indicator Copper contact construction Illuminated design Large rocker size Rated current up to 6A Rated voltage up to 250V Durable construction Suitable for panel-mount applications Indicator helps provide visual switching/status indication 📋 Technical Specifications Model: BR34 Switch Type: Rocker Switch Switch Function: ON-OFF-ON Number of Pins: 6 Switch Throw Type: DPDT Rated Voltage: 250V Rated Current: 6A Illuminated: Yes / With Indicator Indicator: Built-in indicator Contact Plating: Copper Material: Copper and Iron Color: Red Size: Big Rocker Mechanical Life: Up to 5 years Mounting: Panel Mount Application: Electrical and electronic equipment 🔧 Applications UPS systems Power strips Voltage stabilizers Water dispensers Coffee machines Automobiles USB hubs Electrical machinery DIY electrical projects Control panels Power switching applications 🛠️ Installation Ensure the power supply is switched OFF before installation. Identify the correct terminals according to the required DPDT switching configuration. Connect the wires securely to the appropriate terminals. Ensure the connected load does not exceed the 6A rated current. Mount the switch firmly into the appropriate panel cutout. Verify the indicator wiring and rating before connection. 📦 Package Includes 1 × UPS Rocker Switch Red 6 Pin ON-OFF-ON with Indicator Model: BR34 ⚠️ Precautions Do not exceed the rated 250V / 6A specification. Switch OFF the power supply before installation or wiring. Ensure proper insulation of all electrical connections. Use suitable wiring according to the connected load. Verify the indicator voltage specification before connecting it to the circuit. Verify the pin configuration before connecting the switch. Do not directly connect the indicator to a voltage for which it is not rated.
UPS Rocker Switch Black 6 Pin ON-OFF-ON
[Mechanical Switches] UPS Rocker Switch Black 6 Pin ON-OFF-ON – BR34 The UPS Rocker Switch Black 6 Pin ON-OFF-ON (BR34) is a durable rocker switch designed for reliable switching applications. It features a 6-pin DPDT configuration, copper contacts and a large rocker design for convenient operation. With a rated voltage of up to 250V and a rated current of 6A, it can be used in power strips, stabilizers, water dispensers, coffee machines, automobiles, USB hubs, machinery and other electrical equipment. ⭐ Key Features 6-pin rocker switch ON-OFF-ON switching function DPDT switch configuration Black color Copper contact construction Non-illuminated design Large rocker size Rated current up to 6A Rated voltage up to 250V Durable construction Suitable for panel-mount applications 📋 Technical Specifications Model: BR34 Switch Type: Rocker Switch Switch Function: ON-OFF-ON Number of Pins: 6 Switch Throw Type: DPDT Rated Voltage: 250V Rated Current: 6A Illuminated: No / Non-Illuminated Contact Plating: Copper Material: Copper and Iron Color: Black Size: Big Rocker Mechanical Life: Up to 5 years Mounting: Panel Mount Application: Electrical and electronic equipment 🔧 Applications UPS systems Power strips Voltage stabilizers Water dispensers Coffee machines Automobiles USB hubs Electrical machinery DIY electrical projects Control panels Power switching applications 🛠️ Installation Ensure the power supply is switched OFF before installation. Identify the correct terminals according to the required DPDT switching configuration. Connect the wires securely to the appropriate terminals. Ensure the connected load does not exceed the 6A rated current. Mount the switch firmly into the appropriate panel cutout. 📦 Package Includes 1 × UPS Rocker Switch Black 6 Pin ON-OFF-ON ⚠️ Precautions Do not exceed the rated 250V / 6A specification. Switch OFF the power supply before installation or wiring. Ensure proper insulation of all electrical connections. Use suitable wiring according to the connected load. This is a non-illuminated switch. Verify the pin configuration before connecting the switch to your circuit.
48mm Square Internal Magnet Speaker – 4Ohms 5W
[Speakers] 48mm Square Internal Magnet Speaker – 4Ω 5W The 48mm Square Internal Magnet Speaker is a compact full-range audio driver designed for clear and efficient sound reproduction in space-constrained applications. With a 4Ω impedance and 5W power rating, this speaker is suitable for Bluetooth speakers, portable audio systems, DIY speaker projects and embedded electronic devices. Its square frame allows convenient mounting inside compact enclosures and panels. ⭐ Key Features Compact square speaker design 4Ω impedance 5W power rating Internal magnet construction Full-range audio output Compact size for space-limited applications Easy to install inside speaker enclosures Suitable for DIY and commercial audio projects Lightweight and practical design 📋 Technical Specifications Speaker Type: Internal Magnet Speaker Shape: Square Speaker Size: 48mm class Model: 4Ω 5W Impedance: 4Ω Power Rating: 5W Magnet Type: Internal Magnet Audio Type: Full-range Mounting Type: Panel / Enclosure Mount Dimensions: 47 × 29 × 23mm Application: Compact audio systems, DIY electronics and portable speakers 🔧 Applications Bluetooth speaker systems Portable speakers DIY speaker projects Compact audio enclosures Embedded audio systems Intercom systems Alert and notification devices Educational electronics projects Consumer electronic devices Custom audio projects 🛠️ Installation Connect the speaker to a compatible amplifier with a 4Ω output. Ensure the amplifier's output power is suitable for the speaker's 5W rating. Mount the speaker securely inside the enclosure to reduce unwanted vibration. Observe correct speaker polarity when connecting multiple speakers. 📦 Package Includes 1 × 48mm Square Internal Magnet Speaker Impedance: 4Ω Power: 5W ⚠️ Precautions Do not exceed the 5W rated power for prolonged operation. Use a compatible 4Ω amplifier. Avoid short-circuiting the speaker terminals. Keep away from moisture, excessive heat and physical damage. Ensure proper mounting to minimize vibration and unwanted noise. Actual sound quality depends on the amplifier, enclosure and application.
Almirah Wardrobe Switch – 250V AC 6A Momentary Push-to-Off Switch
[Mechanical Switches] Almirah Wardrobe Switch – 250V AC 6A Momentary Push-to-Off Switch The Almirah Switch is a compact single-pole momentary push-to-off switch designed for use in almirahs, cupboards, wardrobes, cabinets, and furniture lighting applications. It provides instantaneous switching action and is suitable for applications where an electrical circuit needs to be switched according to the opening or closing of a cabinet or door. The switch features a high-grade polycarbonate body and brass contacts, providing reliable electrical conduction and durability for regular use. Its compact design is intended to fit standard almirah cutouts and supports panel or surface mounting with screw-type wire terminals. With a rating of 250V AC and 6A, an IP20 protection level, and a mechanical life of more than 10,000 operations, this switch is suitable for indoor furniture and cabinet applications. ⭐ Key Features 250V AC rated voltage 6A current rating Single-pole design Momentary push-button operation Push-to-Off action Instantaneous response High-grade polycarbonate construction Brass electrical contacts Compact design for standard almirah cutouts Panel or surface mounting Screw-type wire terminals Glossy white finish Mechanical life of >10,000 operations IP20 protection RoHS compliant 📋 Technical Specifications Product Type: Almirah Switch Switch Type: Momentary Actuator Type: Push Button Circuit Type: Single Circuit Number of Poles: Single Pole Rated Voltage: 250V AC Maximum Voltage: 250V AC Current Rating: 6A Maximum Current: 6A Response Time: Instantaneous Automation Grade: Manual Material: High-Grade Polycarbonate Contact Material: Brass Wire Terminal: Screw-Type Mounting Type: Panel / Surface Mount Protection Level: IP20 Finish Type: Glossy Color: White Operating Temperature: -10°C to +50°C Temperature Range: -10°C to +50°C Mechanical Life: >10,000 Operations Insulation Resistance: 100MΩ Minimum @ 500V DC Contact Resistance: 50mΩ Stroke: Standard Push-to-Off Action Size: Compact; fits standard almirah cutout Weight: Approximately 20g Number of Modules: Single Module UV Stabilized: Normal RoHS Compliance: Yes 🔌 Operation The switch provides a push-to-off momentary action. It is designed for applications where the switch operates automatically through the physical movement of a cupboard, wardrobe, almirah, or cabinet door. 🔧 Applications Almirah Lighting Cupboard Lighting Wardrobe Lighting Cabinet Lighting Furniture Lighting Storage Cabinet Applications Office Cabinets Home Furniture Control Panels Indoor Electrical Applications 🛠️ Installation The switch can be installed using its panel or surface mounting arrangement. Fit the switch into a suitable cutout and secure it firmly. Connect the wires to the screw-type terminals with the power supply switched off during installation. 📦 Package Includes 1 × Almirah Switch – White, 250V AC 6A ⚠️ Precautions Disconnect the power supply before installation or wiring. Do not exceed the 250V AC / 6A rating. Ensure screw terminals are tightened securely. Use suitable wiring for the connected load. Intended primarily for indoor applications. IP20 protection does not provide waterproof protection. Do not use in wet or exposed outdoor environments. Replace the switch if contacts become damaged or operation becomes unreliable. ❓ Frequently Asked Questions Q: What is the voltage and current rating?A: The switch is rated for 250V AC and 6A. Q: What type of switch is it?A: It is a single-pole momentary push-to-off switch. Q: Where can it be installed?A: It is designed for almirahs, cupboards, wardrobes, cabinets, and similar furniture applications. Q: What material is used for the switch?A: The body is made from high-grade polycarbonate, with brass contacts. Q: What is the mechanical life?A: The supplied specification states a mechanical life of more than 10,000 operations.
Black Plastic 3×18650 Battery Holder or Case Series Connection With Wire
[Lithium Battery Holder] Black Plastic 3×18650 Battery Holder – Series Connection The Black Plastic 3×18650 Battery Holder is designed to securely hold three 18650 lithium-ion battery cells in series configuration. It provides a convenient and organized way to mount 18650 cells for DIY battery packs, portable electronics, power supplies, LED projects, and other battery-powered applications. The holder is made from durable plastic and features mounting holes for secure installation using suitable screws. It is supplied with red and black connecting wires for convenient connection to an external circuit. ⭐ Key Features Designed for 3 × 18650 battery cells Series connection Black plastic construction Without cover Secure battery positioning Easy installation Built-in mounting holes Red and black connecting wires Suitable for DIY battery pack projects Compact and lightweight design 📋 Technical Specifications Product Type: 18650 Battery Holder Battery Capacity: 3 Cells Battery Type: 18650 Li-Ion Cell Configuration: 3S / Series Connection Nominal Output Voltage: Approximately 11.1V with 3.7V cells Fully Charged Voltage: Approximately 12.6V Material: Plastic Color: Black Cover: Without Cover Connection Wires: Red and Black Mounting: Screw Mount Mounting Holes: Yes Recommended Screw Size: Approximately 3mm Application: Battery Pack / Portable Electronics 🔌 Connection The three 18650 cells are connected in series, increasing the total voltage while maintaining the capacity of a single cell. With standard 3.7V nominal cells, the pack is approximately 11.1V nominal and 12.6V when fully charged. The red wire is the positive connection and the black wire is the negative connection. 🔧 Applications DIY 18650 Battery Packs 3S Lithium-Ion Battery Packs Portable Electronics LED Lighting Projects DIY UPS Projects Arduino Projects ESP8266 / ESP32 Projects Rechargeable Electronics Battery-Powered Devices Electronics Prototyping 📦 Package Includes 1 × 3×18650 Battery Holder / Case – Series Connection, Without Cover ⚠️ Precautions Use only compatible 18650 Li-Ion cells. Use three cells with matching capacity, chemistry, age, and charge condition. Use a suitable 3S BMS/protection and charging circuit. Do not mix damaged or mismatched cells. Check polarity carefully before installation. Do not short-circuit the battery terminals. Do not use damaged, swollen, or leaking cells. Ensure the holder and wiring are securely installed.
Out of stockGold AP-55 TPA3116D2 2×50W Bluetooth Stereo Digital Amplifier Board with USB, TF Card, FM & Remote
[Amplifier Board] Gold AP-55 TPA3116D2 2×50W Bluetooth Stereo Digital Amplifier Board with USB, TF Card, FM & Remote The Gold AP-55 is a compact Class-D stereo digital audio amplifier board based on the TPA3116D2 amplifier IC, designed for DIY Bluetooth speakers, home audio systems, portable speakers, bookshelf speakers, multimedia systems, and custom audio projects. Available product listings consistently identify the AP-55 as a dual-channel 50W + 50W amplifier, with a DC input range around 8–24V or 12–24V depending on the listing/version. The AP-55 combines the power amplifier with a multimedia player supporting Bluetooth 5.0, USB, TF/SD card, FM radio and AUX input. The Bluetooth device name is reported as GD-82EM, while the FM tuner covers 87.5–108.0MHz. It also includes an infrared remote control and a digital display for convenient operation. The TPA3116D2 Class-D amplifier provides efficient stereo amplification, making the board suitable for building compact but powerful audio systems. One detailed listing specifies support for 4Ω–8Ω speakers, with the commonly advertised maximum output of 50W per channel. ⭐ Key Features Gold AP-55 amplifier module TPA3116D2 Class-D amplifier IC 50W + 50W dual-channel stereo output Supports 4Ω–8Ω speakers Bluetooth 5.0 wireless audio Bluetooth device name: GD-82EM Built-in USB music player Built-in TF / SD card player Built-in FM radio FM frequency range 87.5–108.0MHz 3.5mm AUX input Infrared remote control Digital display Supports MP3 / WMA / WAV Power-off memory function Remembers the previous song and volume Compact design for DIY speaker projects High-efficiency Class-D amplification 📋 Technical Specifications Product Type: Stereo Class-D Digital Amplifier Board Model: Gold AP-55 Amplifier IC: TPA3116D2 Amplifier Class: Class-D Number of Channels: 2 / Stereo Output Power: 50W + 50W Maximum Total Output: 100W Speaker Impedance: 4Ω–8Ω Input Voltage: DC 8–24V (some listings specify 12–24V; verify the exact board version before use) Bluetooth Version: 5.0 Bluetooth Name: GD-82EM Bluetooth Range: Up to approximately 10–15m under suitable conditions Audio Formats: MP3 / WMA / WAV USB Support: Yes TF/SD Card Support: Yes FM Radio: Yes FM Frequency: 87.5–108.0MHz AUX Input: 3.5mm / Wired Audio Input Remote Control: IR Remote Remote Range: Approximately 4–7m Display: Digital Display Power-Off Memory: Yes Memory Function: Last song and volume Audio Input Modes: Bluetooth / USB / TF Card / FM / AUX Output: Dual-Channel Stereo Efficiency: Greater than 90% according to one detailed listing SNR: Approximately 102dB according to one detailed listing Distortion: Below 0.1% at normal listening levels according to one detailed listing Board Size: Approximately 70 × 50 × 20mm with shell, according to one listing 🎵 Audio & Playback Functions The AP-55 can switch between Bluetooth, USB, TF/SD Card, FM Radio and AUX sources. When Bluetooth mode is selected, users can pair a phone or other compatible device with GD-82EM. USB and TF/SD cards can be used for local music playback, while AUX provides a wired audio input. 📻 FM Radio The built-in FM tuner supports the 87.5–108.0MHz broadcast band. FM stations can be searched and selected using the onboard controls or remote control. 🎛️ Controls & Remote The module provides controls for functions such as previous track, next track, volume up, volume down, play/pause, mode selection and FM station selection. The infrared remote provides additional wireless control of playback, volume, mode and other supported functions. 🔧 Applications DIY Bluetooth Speakers High-Power Bluetooth Speaker Projects Portable Speaker Systems Bookshelf Speaker Systems Home Audio Projects Multimedia Speaker Systems USB MP3 Speaker Systems TF/SD Card Music Players FM Radio Speaker Projects Car Audio Projects Custom Wooden Speaker Cabinets Desktop Audio Systems Electronics DIY Projects 🛠️ Installation Connect a suitable DC power supply within the specified voltage range and observe the correct polarity. Connect the left and right speaker outputs to compatible 4Ω–8Ω speakers. Select Bluetooth, USB, TF/SD, FM or AUX according to the desired audio source. For maximum advertised output, a suitable 24V high-current power supply is recommended by one vendor; at lower supply voltages, available output power will be lower. 📦 Package Includes 1 × Gold AP-55 TPA3116D2 2×50W Bluetooth Amplifier Board 1 × IR Remote Control 1 × Required Connecting Wires/Cables (package contents may vary by seller/version) ⚠️ Precautions Verify the exact input voltage requirement of your AP-55 version before powering it. Do not exceed 24V DC where the board specification limits input to 24V. Check power polarity carefully before connection. Use speakers with a compatible 4Ω–8Ω impedance. Do not short-circuit the speaker output terminals. Ensure adequate ventilation during high-power operation. Use a suitable high-current power supply for high-output operation. Do not connect the speaker outputs together or directly to ground. Keep the board away from moisture and conductive materials. Incorrect wiring or excessive voltage can permanently damage the amplifier IC.
2 Inch 4 Ohms 5Watt Internal Magnet Speaker with Frame
[Speakers] 2-Inch Internal Magnet Speaker with Frame – 53×29×23mm 4Ω 5W The 2-Inch Internal Magnet Speaker with Frame is a compact and efficient audio driver designed for DIY electronics, portable audio devices, alarms, toys, embedded systems, and other space-constrained applications. Featuring an internal magnet design and durable frame construction, this speaker provides clear and balanced sound output while maintaining a compact footprint. With dimensions of 53×29×23mm, 4Ω impedance, and a 5W power rating, this speaker is suitable for small amplifier projects and electronic devices requiring a compact audio solution. The mounting frame makes installation convenient in custom enclosures and equipment. ⭐ Key Features 2-Inch compact speaker design Internal magnet structure 4Ω impedance 5W power rating Durable metal frame construction Clear and balanced sound output Compact and space-saving design Easy mounting with frame and screw slots Suitable for low and medium-power audio applications Ideal for DIY and OEM applications 📋 Technical Specifications Product Type: Dynamic Internal Magnet Speaker Speaker Size: 2 Inch Dimensions: 53 × 29 × 23mm Impedance: 4Ω Power Rating: 5W Magnet Type: Internal Magnet Magnet Material: Ferrite Shape: Rectangular Frame Type: Metal Frame Cone Material: Paper / Mylar Diaphragm depending on variant Speaker Type: Full Range / Dynamic Speaker Mounting: Frame with Screw Slots Application: Compact Audio & Embedded Electronics 🔧 Applications DIY Speaker Projects Portable Audio Devices Bluetooth Speaker Projects Alarm Systems Toys and Sound Modules Intercom Systems Embedded Electronics Educational Electronics Kits Replacement Speaker Repairs Smart Gadgets OEM Product Manufacturing Mini Amplifier Projects 🛠️ Installation Connect the speaker to a compatible amplifier output matching the speaker's 4Ω impedance and 5W power rating. Secure the speaker firmly using the mounting frame to reduce unwanted vibration and noise during operation. 📦 Package Includes 1 × 2-Inch Internal Magnet Speaker with Frame – 4Ω 5W ⚠️ Precautions Match the 4Ω impedance with the amplifier output. Do not exceed the 5W rated power. Avoid applying direct DC voltage to the speaker. Avoid exposure to moisture and excessive humidity. Mount the speaker securely before operation. Do not apply physical pressure to the speaker cone or diaphragm. Avoid short circuits at the speaker terminals. Keep the speaker away from excessive heat and magnetic interference.
1K Ohm Rotary Potentiometer Round Shaft 3 Pin Elcon
[Potentiometer] 1KΩ Rotary Potentiometer Round Shaft Elcon The 1KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 1KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 10mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 1KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 10mm Body Diameter / Width: 16mm Total Height: Approx. 25mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 1KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 1KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch before installation.
5K Ohms Rotary Potentiometer Round Shaft 3 Pin Elcon
[Potentiometer] 5KΩ Rotary Potentiometer Round Shaft Elcon The 5KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 5KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 13mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 5KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 13mm Body Diameter / Width: 16mm Total Height: Approx. 28mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 5KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 5KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch
16 sq mm Copper Ring Lug Cable Terminal
[Terminal Connector] 16 sq mm Pure Copper Ring Lug Cable Terminal The 16 sq mm Pure Copper Ring Lug Cable Terminal is a high-quality electrical cable lug designed for making secure and reliable connections in high-current electrical systems. Made from pure copper, it provides excellent electrical conductivity and a strong mechanical connection between the cable and the terminal point. The ring lug design allows the terminal to be securely fastened to battery terminals, busbars, studs, bolts, and other electrical connection points. It is suitable for battery packs, inverters, UPS systems, solar installations, automotive wiring, and industrial electrical applications. The compact construction provides a reliable connection while allowing easy installation using a suitable crimping tool. The terminal is ideal for applications where a strong and low-resistance electrical connection is required. ⭐ Key Features Made from pure copper Designed for 16 sq mm cable Ring lug terminal design Excellent electrical conductivity Strong and reliable mechanical connection Suitable for high-current applications Easy bolt and stud mounting Suitable for battery and power wiring Ideal for electrical and DIY applications 📋 Technical Specifications Product Type: Copper Ring Cable Lug Material: Pure Copper Compatible Cable Size: 16 sq mm Terminal Type: Ring Lug Finish: Natural Copper / Tinned, depending on variant Connection Type: Bolt / Stud Mount Application: High-Current Electrical Connections 🔧 Applications Lithium Battery Packs LiFePO₄ Battery Systems Lead-Acid Batteries Inverter Connections UPS Systems Solar Power Systems Automotive Wiring Electrical Panels Power Distribution Industrial Wiring DIY Battery Projects 📦 Package Includes 1 × 16 sq mm Pure Copper Ring Lug Cable Terminal ⚠️ Precautions Select the correct lug according to the 16 sq mm cable size and required mounting hole diameter. Use a suitable cable-lug crimping tool for a secure connection. Ensure the cable is properly inserted and crimped before use. Do not exceed the safe current capacity of the cable and terminal assembly. Ensure all electrical connections are properly insulated and secured.
802580 LiPo Battery 700mAh 3.7V High Discharge 25c for Drone
[LiPo Cell] LiPo Battery 700mAh 3.7V High Discharge 802580 3.7V Lithium Polymer Battery • 700mAh Capacity • 25C High Discharge • 802580 Cell • Molex 2.0mm 2-Pin Connector The LiPo Battery 700mAh 3.7V High Discharge 802580 is a compact and lightweight Lithium Polymer (LiPo) rechargeable battery designed for applications that require high current output in a small form factor. Built with high-quality lithium polymer cells, this battery delivers a nominal voltage of 3.7V and a 700mAh capacity, making it ideal for RC toys, drones, mini helicopters, robotics, wireless electronics, and DIY projects. With a 25C continuous discharge rating, this battery can provide rapid bursts of current for motors and other high-power devices. The battery comes with a Molex 2.0mm 2-pin connector and an integrated protection PCB, offering added safety during charging and discharging. The 802580 cell size refers to the approximate dimensions of 8.0 × 25 × 80 mm, allowing the battery to fit easily into compact electronic devices while maintaining excellent power-to-weight performance. Note: This battery is intended for high-discharge applications such as RC models and robotics. It is not recommended for long-duration low-current devices such as cameras or data loggers. ⭐ Features High-quality 3.7V 700mAh LiPo battery 25C continuous discharge capability Compact 802580 cell size Lightweight design Stable voltage output Built-in protection circuit (PCB) Pre-installed Molex 2.0mm 2-pin connector Excellent power-to-weight ratio Rechargeable and reusable Suitable for high-current applications Easy plug-and-play installation 📋 Technical Specifications Product Type: Rechargeable Lithium Polymer (LiPo) Battery Battery Chemistry: Lithium Polymer (Li-ion Polymer) Cell Size: 802580 Nominal Voltage: 3.7V Full Charge Voltage: 4.20V Typical Capacity: 700mAh Discharge Rating: 25C Continuous Dimensions: Approx. 8.0 × 25 × 80 mm Weight: Approx. 18g Connector Type: Molex 2.0mm 2-Pin Protection Circuit: Built-in PCB Protection Rechargeable: Yes 🔧 Applications Suitable for: RC Cars RC Airplanes RC Helicopters Drones & Quadcopters Robotics Projects Arduino Projects ESP32 Projects DIY Electronics Portable Devices Wireless Modules Educational Projects Electronic Prototyping Battery Replacement Projects Miniature Electronics 📦 Package Includes 1 × LiPo Battery 700mAh 3.7V High Discharge 802580 with Molex 2.0mm 2-Pin Connector ⚠️ Safety Instructions Use only LiPo-compatible chargers. Do not charge above 4.20V. Do not discharge below the recommended cut-off voltage. Do not short-circuit the battery terminals. Do not puncture, crush, or expose the battery to fire. Store partially charged in a cool, dry place when not in use. Ensure connector polarity matches your device before connection.
5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal
[Power Connector] 🔌 5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal (Male / Female) Standard DC Barrel Connector • 2-Pin Screw Terminal • Solder-Free Installation • Up to 5A Current Rating The 5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal is a convenient and reliable connector designed for quick and secure DC power connections without soldering. Compatible with the industry-standard 5.5mm outer diameter and 2.1mm inner diameter barrel connector, it is widely used in CCTV camera installations, LED lighting, routers, power adapters, and DIY electronics projects. Available in Male and Female variants, this connector features a 2-pin screw terminal that allows wires to be connected easily using a screwdriver. The clearly marked positive (+) and negative (–) terminals help prevent wiring errors, making installation simple for both professionals and hobbyists. Manufactured with a durable ABS plastic housing and nickel-plated metal contacts, this connector provides reliable electrical performance, corrosion resistance, and long service life. Its reusable design makes it ideal for prototyping, repairs, and permanent installations. ⭐ Features Standard 5.5 × 2.1mm DC barrel connector Available in Male and Female versions 2-pin screw terminal for quick wire connection No soldering required Clearly marked positive (+) and negative (–) terminals Supports up to 5A current Durable ABS plastic housing Nickel-plated contacts for improved conductivity Secure and reusable connection Easy plug-and-play installation Suitable for 12V and 24V DC systems Ideal for DIY electronics and repair work 📋 Technical Specifications Product Type: DC Power Jack Plug with Screw Terminal Connector Type: Male / Female Barrel Size: 5.5mm (Outer) × 2.1mm (Inner) Terminal Type: 2-Pin Screw Terminal Rated Voltage: 0–30V DC Recommended Operating Voltage: 12V / 24V DC Maximum Current: Up to 5A Housing Material: ABS Plastic Contact Material: Nickel-Plated Metal Mounting Type: Inline Cable Mount Wire Compatibility: Up to 22 AWG Polarity Marking: Positive (+) / Negative (–) Operating Temperature: -20°C to +80°C 🔧 Applications Suitable for: CCTV Camera Power Connections LED Strip Lighting LED Sign Boards DC Power Adapters Routers and Modems Arduino Projects Raspberry Pi Projects DIY Electronics Battery Packs Power Distribution Systems Industrial Control Equipment Testing and Prototyping Electronic Repairs Low-Voltage DC Power Systems 📦 Package Includes 1 × 5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal (Male or Female variant as selected) ⚠️ Note Please select the required Male or Female connector variant before ordering. Verify polarity before connecting power to avoid damage to connected devices. Suitable for low-voltage DC applications only. Product appearance may vary slightly depending on the manufacturing batch.
Passive Radiator Bass Diaphragm Rubber Speaker Vibration Plate for DIY Speakers
[Passive Radiator] 🔊 Oval, Square & Round Passive Radiator Bass Diaphragm Rubber Speaker Vibration Plate for DIY Speakers Deep Bass Enhancement • Passive Design • No External Power Required • Ideal for DIY Speaker Projects The Rubber Passive Radiator Bass Diaphragm is a high-quality auxiliary bass vibration plate designed to significantly improve the low-frequency response of speaker systems. Available in Oval, Square, and Round shapes with multiple sizes, this passive radiator enhances bass performance without requiring additional power or amplifier channels. Unlike conventional speakers, a passive radiator does not contain a voice coil or magnet. Instead, it utilizes the air pressure generated by the active speaker driver to vibrate, producing deeper, richer bass while minimizing distortion and unwanted cabinet resonance. Manufactured using premium rubber and durable ABS materials, these passive radiators provide excellent flexibility, durability, and long service life. They are ideal for upgrading Bluetooth speakers, portable speakers, multimedia speakers, subwoofers, soundbars, and custom DIY audio projects. Whether you're repairing an existing speaker or building a custom enclosure, these passive bass diaphragms help deliver powerful low-frequency performance while maintaining compact enclosure sizes. ⭐ Features Premium quality rubber passive radiator Available in Oval, Square & Round shapes Produces deep and powerful bass response No power supply or wiring required Improves low-frequency performance Reduces speaker distortion Durable rubber suspension Lightweight and compact design Easy to install Ideal for DIY speaker upgrades and repairs 📋 Technical Specifications Product Type: Passive Radiator Bass Diaphragm Material: Rubber + ABS Plastic+Metal Shape: Oval / Square / Round (Depending on Selected Variant) Available Sizes: Multiple Sizes (2040 to 6090 Series) Operation: Passive (No Voice Coil or Magnet) Power Requirement: None Installation Type: Speaker Cabinet Mount Application: Low Frequency Bass Enhancement Color: Black 🔧 Applications Suitable for: Bluetooth Speakers Portable Speakers DIY Speaker Projects Multimedia Speakers Home Audio Systems Bookshelf Speakers Soundbars Subwoofers Wireless Speakers Audio System Repairs Custom Speaker Cabinets DIY Audio Enclosures 📦 Package Includes 1 × Passive Radiator Bass Diaphragm (Size & Shape as Selected) ⚠️ Note This is a passive radiator only and does not contain a voice coil, magnet, or electrical terminals. Product images are for reference only. The actual product may vary slightly in appearance depending on the selected size, shape, or manufacturing batch.
Electric Kettle Thermostat Switch T125 16A 250V Automatic Thermal Cut-Off Switch White
[Mechanical Switches] The Electric Kettle Thermostat Switch T125 is a high-quality temperature control switch used in electric kettles and various heating appliances. It incorporates a precision bimetal thermostat that senses temperature and automatically disconnects the heating element once the desired temperature is reached, helping prevent overheating and dry-boil conditions. Manufactured with heat-resistant engineering plastic and durable silver alloy contacts, the thermostat offers stable switching performance, excellent electrical reliability, and a long mechanical life. The white housing provides excellent heat resistance, electrical insulation, and durability for continuous use in household appliances. With a 16A current rating and 250V AC operating voltage, the thermostat is suitable for most standard electric kettles, hot water dispensers, electric boilers, and similar heating equipment. Its compact design allows quick installation and easy replacement of worn or damaged thermostat switches. 🔹 Key Features Automatic temperature control Built-in overheat protection Dry-boil safety protection Precision bimetal thermostat Rated for 16A current Heat-resistant white housing Silver alloy electrical contacts Stable and reliable switching performance Long electrical and mechanical life Easy installation and replacement 🔹 Technical Specifications Product Type: Electric Kettle Thermostat Switch Model: T125 Rated Voltage: 250V AC Rated Current: 16A Temperature Rating: T125 Switching Type: Automatic Thermal Cut-Off Contact Type: Normally Closed (NC) Reset Type: Automatic (Application Dependent) Mounting Type: Screw Mount Terminal Type: Quick Connect Terminals Housing Material: Heat-Resistant Engineering Plastic Housing Color: White Contact Material: Silver Alloy Operating Frequency: 50/60Hz Operating Temperature: Up to 125°C Ambient Rating 🔹 Applications Suitable for: Electric kettles Electric water boilers Tea makers Coffee makers Hot water dispensers Steam appliances Water heating equipment Household appliances Appliance repair and replacement 🔹 Package Includes 1 × Electric Kettle Thermostat Switch T125 16A White
Electric Kettle Thermostat Switch T125 16A 250V Automatic Thermal Cut-Off Switch Black
[Mechanical Switches] The Electric Kettle Thermostat Switch T125 is a high-quality temperature control switch used in electric kettles and various heating appliances. It incorporates a precision bimetal thermostat that senses temperature and automatically disconnects the heating element once the desired temperature is reached, helping prevent overheating and dry-boil conditions. Manufactured with heat-resistant engineering plastic and durable silver alloy contacts, the thermostat offers stable switching performance, excellent electrical reliability, and a long mechanical life. The black housing provides excellent heat resistance and durability for continuous use in household appliances. With a 16A current rating and 250V AC operating voltage, the thermostat is suitable for most standard electric kettles, hot water dispensers, electric boilers, and similar heating equipment. Its compact design allows quick installation and easy replacement of worn or damaged thermostat switches. 🔹 Key Features Automatic temperature control Built-in overheat protection Dry-boil safety protection High-quality bimetal thermostat Rated for 16A current Heat-resistant black housing Silver alloy electrical contacts Stable and reliable switching Long electrical and mechanical life Easy installation and replacement 🔹 Technical Specifications Product Type: Electric Kettle Thermostat Switch Model: T125 Rated Voltage: 250V AC Rated Current: 16A Temperature Rating: T125 Switching Type: Automatic Thermal Cut-Off Contact Type: Normally Closed (NC) Reset Type: Automatic (Application Dependent) Mounting Type: Screw Mount Terminal Type: Quick Connect Terminals Housing Material: Heat-Resistant Plastic Housing Color: Black Contact Material: Silver Alloy Operating Frequency: 50/60Hz Operating Temperature: Up to 125°C Ambient Rating 🔹 Applications Suitable for: Electric kettles Electric water boilers Tea makers Coffee makers Hot water dispensers Steam appliances Water heating equipment Household appliances Appliance repair and replacement 🔹 Package Includes 1 × Electric Kettle Thermostat Switch T125 16A Black
Single Side Adhesive Barley Insulation Paper Roll 65mm x 1 Meter for Lithium Battery Packs
[Insulation Paper] The Single Side Adhesive Barley Insulation Paper Roll is a premium electrical insulation material widely used in lithium-ion battery pack manufacturing and electrical insulation applications. Manufactured from high-quality cellulose fiber, it offers excellent dielectric properties, mechanical strength, and long-term reliability. In addition, the insulation paper features a single-sided adhesive backing that allows quick and secure installation on battery cells, terminals, and electrical components. As a result, it simplifies battery pack assembly and improves production efficiency. Because of its excellent heat resistance and electrical insulation characteristics, the paper helps prevent short circuits and protects battery cells from mechanical damage. Furthermore, the material provides good oil resistance and moisture absorption properties, making it suitable for demanding industrial environments. The flexible design allows easy cutting and shaping for custom battery pack configurations. Moreover, it is commonly used in lithium-ion battery manufacturing, electric vehicles, power tools, and industrial insulation applications. This insulation paper is widely used in battery packs, cell insulation, gasket manufacturing, automotive applications, and electrical equipment assembly. 🔹 Key Features Single-side adhesive insulation paper Excellent dielectric properties High mechanical strength Good heat resistance Oil-resistant material Moisture absorption capability Flexible and easy to cut Suitable for lithium battery packs Reliable electrical insulation Durable and long-lasting performance 🔹 Technical Specifications Product Type: Barley Insulation Paper Roll Material: Pure Cellulose Fiber Adhesive Type: Single Side Adhesive Color: Green Width: 65mm Length: 1 Meter Thickness: Less than 0.5mm Electrical Property: High Dielectric Strength Mechanical Strength: High Flexibility: Excellent Packaging Type: Roll 🔹 Applications This insulation paper is suitable for: Lithium-ion battery packs 18650 battery pack assembly Battery terminal insulation Cell paper machines Electric vehicle battery packs Power tool battery packs Automotive gasket applications Electrical insulation projects Industrial equipment insulation 🔹 Package Includes 1 × Single Side Adhesive Barley Insulation Paper Roll 65mm × 1 Meter
3.7V BMS 1S 2A 18650 Lithium Battery Protection Board
[Lithium Battery Protection Board] The 1S 3.7V Lithium Battery Protection Board (BMS/PCM) is a compact battery management module designed specifically for single-cell lithium-ion batteries such as 18650, 14500, and similar 3.7V rechargeable cells. It continuously monitors battery voltage and current to ensure safe charging and discharging operations. In addition, the module provides multiple layers of protection including overcharge, over-discharge, overcurrent, and short-circuit protection. As a result, it helps extend battery life and improves the safety of battery-powered devices. Because of its compact size, the protection board can be easily integrated into DIY battery packs, portable electronics, LED lighting systems, and rechargeable battery projects. Furthermore, the board uses nickel-strip compatible terminals for easy battery pack assembly. The protection circuit is designed for long-term reliable operation and helps prevent damage caused by improper charging or excessive current draw. Moreover, it offers high voltage detection accuracy for improved battery management performance. ⚠️ Note: This protection board is designed for 3.7V Lithium-Ion batteries only and is not suitable for LiFePO4 batteries. 🔹 Key Features Single-cell (1S) lithium battery protection board Suitable for 18650 lithium-ion batteries Overcharge protection Over-discharge protection Overcurrent protection Short-circuit protection High voltage detection accuracy Compact and lightweight design Easy installation and integration Long operational life 🔹 Pin Configuration B+ : Battery Positive Terminal B- : Battery Negative Terminal P+ : Charge / Discharge Positive Terminal P- : Charge / Discharge Negative Terminal 🔹 Technical Specifications Product Type: Lithium Battery Protection Module (BMS/PCM) Battery Configuration: 1S (Single Cell) Compatible Battery Type: 3.7V Lithium-Ion (18650, 14500, etc.) Operating Voltage Range: 3.2V – 4.2V Overcharge Detection Voltage: 4.25 ± 0.05V Overcharge Release Voltage: 4.23 ± 0.05V Over-discharge Detection Voltage: 2.54 ± 0.1V Continuous Charge Current: 2A Continuous Discharge Current: 2A Maximum Supported Current: 2A – 5A Protection Functions: Overcharge, Over-discharge, Overcurrent, Short Circuit Terminal Type: Nickel Strip Compatible Board Life Expectancy: More than 20,000 Operating Hours 🔹 Applications This protection board is suitable for: 18650 battery packs Rechargeable lithium battery projects DIY power banks Portable electronics LED lighting systems Battery-powered devices Robotics projects Arduino and ESP32 power systems 🔹 Important Notes Not suitable for LiFePO4 batteries Not recommended for high-current motors above 4A Not suitable for electric bicycles or high-power battery packs Ensure correct polarity during installation Use only with compatible lithium-ion cells 🔹 Package Includes 1 × 1S 3.7V 2A Lithium-Ion Battery Protection Board (BMS/PCM)
3V 100mA LED Filament 45mm COB Edison Bulb Filament
[COB LED] The 3V 100mA LED Filament 45mm is a flexible COB LED light source designed for decorative lighting, Edison bulb restoration, DIY lamps, and creative illumination projects. Available in a variety of colors, it delivers bright and uniform light output while maintaining low power consumption. In addition, the filament provides 360-degree illumination, closely replicating the appearance of traditional Edison-style incandescent filaments. As a result, it is widely used in decorative bulbs, custom lighting fixtures, model lighting, art installations, and creative electronics projects. Because of its flexible substrate design, the filament can be slightly bent to fit custom enclosures and unique lighting arrangements. Furthermore, it produces minimal heat during operation, making it safe for compact and enclosed lighting applications. The advanced COB LED structure ensures consistent brightness, excellent efficiency, and long service life. Moreover, the solderable metal terminals allow quick integration into DIY electronics and lighting projects. 🔹 Key Features Available in multiple colors Bright and uniform light output COB LED filament design Low power consumption Excellent energy efficiency Minimal heat generation 360° illumination pattern Lightweight and compact structure Easy solderable metal terminals Long operational life 🔹 Technical Specifications Product Type: COB LED Filament Operating Voltage: 2.8V to 3.2V DC Rated Voltage: 3V DC Forward Current: 100mA (Maximum) Power Consumption: Approximately 0.3W Brightness: Approximately 80–100 Lumens per Watt Filament Type: COB (Chip-on-Board) LED Filament Base Material: Flexible Polymer Substrate Connection Type: Solderable Metal End-Caps led Length: 45mm Total Length: 55mm Filament Diameter: Approximately 2.0mm Terminal Size: Approximately 2mm × 2mm Weight: Less than 1g Available Colors: Warm White, Cool White, Red, Blue, Green (subject to availability) 🔹 Mechanical Specifications Filament construction Durable polymer substrate Highly resistant to mechanical shock Lightweight design Easy soldering connection terminals Suitable for custom lamp and lighting assemblies 🔹 Applications This LED filament is suitable for: Edison bulb repair and replacement Decorative LED lamps Custom lighting fixtures Battery-powered lighting projects Art installations Scale models and dioramas Display and showcase lighting Wearable electronics DIY electronics projects Creative lighting applications 🔹 Package Includes 1 × 3V 100mA LED Filament 38mm (Selected Color)
5 Pin Mini SPDT Relay 12V 10A 250V PCB Mount Electromagnetic Relay
[Relay Module, Relays] 12V PCB Mount Sugar Cube SPDT Relay – 5 Pin 10A The 12V PCB Mount Sugar Cube SPDT Relay is a compact Single Pole Double Throw (SPDT) electromagnetic relay designed for switching AC and DC electrical loads using a microcontroller, sensor, automation circuit, or other low-power control system. Its compact PCB-mount design makes it suitable for DIY electronics, home automation, security systems, switching circuits, motor control, lighting control, and embedded applications. The relay features a 12V DC coil and a 5-pin SPDT configuration consisting of two coil terminals, COM (Common), NO (Normally Open), and NC (Normally Closed) contacts. When the coil is energized, the internal contact switches between the NC and NO terminals. With contact ratings of up to 10A at 250V AC, 10A at 125V AC, 12A at 120V DC, and 10A at 28V DC, this relay is suitable for a wide range of electrical switching applications. ⭐ Key Features SPDT (Single Pole Double Throw) relay 12V DC coil Compact Sugar Cube design 5-pin configuration PCB mounting type 10A @ 250V AC contact rating 10A @ 125V AC contact rating 12A @ 120V DC contact rating 10A @ 28V DC contact rating Coil resistance: approximately 270Ω Approximately 45mA nominal coil current 50/60Hz frequency specification Fast switching response Suitable for microcontroller and sensor-controlled switching Ideal for automation and control applications 📋 Technical Specifications Product Type: PCB Mount Relay Relay Type: SPDT (Single Pole Double Throw) Contact Configuration: 1 Form C Number of Pins: 5 Coil Voltage: 12V DC Trigger Voltage: 12V DC Coil Resistance: 270Ω Nominal Coil Current: Approximately 45mA Frequency: 50/60Hz Maximum AC Load: 10A @ 250V AC Maximum AC Load: 10A @ 125V AC Maximum DC Load: 12A @ 120V DC Maximum DC Load: 10A @ 28V DC Operating Time: 10ms Release Time: 5ms Mounting Type: PCB Mount Contact Terminals: COM / NO / NC Coil Terminals: Coil End 1 / Coil End 2 🔌 Pin Configuration Coil End 1: One terminal of the 12V DC relay coil Coil End 2: Other terminal of the 12V DC relay coil COM: Common switching contact NO: Normally Open contact NC: Normally Closed contact When the relay coil is not energized, COM is connected to NC. When the 12V DC coil is energized, COM switches from NC to NO. 🛠️ How It Works The relay uses an electromagnetic coil to mechanically switch an electrical circuit. Applying 12V DC to the coil energizes the relay and changes the contact position. A load connected between COM and NC remains connected when the relay is inactive. A load connected between COM and NO remains disconnected until the relay coil is energized. This allows a low-power control circuit such as an Arduino, microcontroller, sensor, timer, or automation controller to control a higher-current AC or DC load. 🔧 Applications Arduino Projects Microcontroller Projects Sensor-Controlled Switching Home Automation Security Systems Lighting Control Fan Control Motor Control Pump Control Power Supply Switching Industrial Control Systems Embedded Electronics DIY Electronics Projects 📦 Package Includes 1 × 12V PCB Mount Sugar Cube SPDT Relay – 5 Pin 10A ⚠️ Precautions Use a suitable 12V DC supply for the relay coil. Do not exceed the specified contact voltage and current ratings. Check the COM, NO, NC, and coil terminals before wiring. Use suitable flyback protection when driving the relay coil from sensitive electronic circuits. Use appropriate suppression/protection components for inductive loads such as motors, solenoids, and coils. Provide sufficient PCB insulation and clearance when switching mains voltage. Disconnect power before changing or modifying wiring. Do not touch exposed mains-voltage terminals during operation.
RS-12 Green 2 Pin Mini Rocker Switch – 6A 250V ON/OFF Standard SPDT Plastic Switch
[Mechanical Switches] 🔘 RS-12 Green 2 Pin Mini Rocker Switch 6A 250V ON/OFF Panel Mount Switch Compact Design • 6A Current Rating • Durable Iron Contacts • Reliable Power Switching The RS-12 Green 2 Pin Mini Rocker Switch is a high-quality, compact ON/OFF panel mount switch designed for reliable switching in electrical and electronic applications. Manufactured using durable materials and iron contacts, this rocker switch ensures dependable performance, smooth operation, and long service life. With a 6A @ 250V AC rating, it is suitable for controlling AC or DC power in home appliances, power supplies, battery chargers, DIY electronics, industrial equipment, automation systems, and control panels. Its 2-pin SPST (Single Pole Single Throw) configuration provides simple ON/OFF switching, while the compact snap-in design allows easy installation even in limited panel space. The attractive green rocker actuator offers clear ON/OFF indication, making it easy to identify the switch position. Designed for up to 100,000 mechanical operations, the RS-12 rocker switch is an excellent choice for both professional and hobby electronics projects. ⭐ Features High-quality RS-12 mini rocker switch Compact 2-pin panel mount design Simple ON/OFF switching operation Rated for 6A at 250V AC Durable plastic housing Iron contact terminals Smooth and reliable switching performance Long mechanical life up to 100,000 cycles Easy snap-in installation Suitable for AC and DC switching Ideal for industrial, commercial, and DIY applications 📋 Technical Specifications Product Name: RS-12 Green Mini Rocker Switch Product Type: Rocker Switch Switch Function: ON/OFF Switch Configuration: SPST (Single Pole Single Throw) Number of Pins: 2 Rated Voltage: 250V AC Rated Current: 6A Power Rating: 250V / 6A Terminal Type: Solder Terminals Contact Material: Iron Housing Material: Plastic Illumination: Non-Illuminated Mechanical Life: Up to 100,000 Operations Mounting Type: Panel Mount (Snap-In) Color: Green Rocker with Black Housing Response Time: Instant RoHS Compliance: No 🔧 Applications Suitable for: Home Appliances Power Supplies Battery Chargers DIY Electronics Arduino Projects Raspberry Pi Projects Robotics Industrial Control Panels Automation Equipment Audio Equipment LED Lighting Systems Electronic Toys Test Equipment Consumer Electronics Repair & Maintenance 📦 Package Includes 1 × RS-12 Green 2 Pin Mini Rocker Switch ⚠️ Note Verify the switch rating before connecting high-voltage or high-current loads. Disconnect power before installation or maintenance. Product color, markings, and dimensions may vary slightly depending on the manufacturing batch.
RS-12 Blue 2 Pin Mini Rocker Switch – 6A 250V ON/OFF Standard SPDT Plastic Switch
[Mechanical Switches] 🔵 RS-12 Blue 2 Pin Mini Rocker Switch 6A 250V ON/OFF Panel Mount Switch Compact Design • 6A Current Rating • Durable Iron Contacts • Reliable Power Switching The RS-12 Blue 2 Pin Mini Rocker Switch is a high-quality, compact ON/OFF panel mount switch designed for reliable switching in electrical and electronic applications. Manufactured using durable materials and iron contacts, this rocker switch ensures dependable performance, smooth operation, and long service life. With a 6A @ 250V AC rating, it is suitable for controlling AC or DC power in home appliances, power supplies, battery chargers, DIY electronics, industrial equipment, automation systems, and control panels. Its 2-pin SPST (Single Pole Single Throw) configuration provides simple ON/OFF switching, while the compact snap-in design allows easy installation even in limited panel space. The attractive blue rocker actuator provides clear ON/OFF indication while giving electronic equipment a modern and professional appearance. Designed for up to 100,000 mechanical operations, the RS-12 rocker switch is an excellent choice for both professional and hobby electronics projects. ⭐ Features High-quality RS-12 mini rocker switch Compact 2-pin panel mount design Simple ON/OFF switching operation Rated for 6A at 250V AC Durable plastic housing Iron contact terminals Smooth and reliable switching performance Long mechanical life up to 100,000 cycles Easy snap-in installation Suitable for AC and DC switching Ideal for industrial, commercial, and DIY applications 📋 Technical Specifications Product Name: RS-12 Blue Mini Rocker Switch Product Type: Rocker Switch Switch Function: ON/OFF Switch Configuration: SPST (Single Pole Single Throw) Number of Pins: 2 Rated Voltage: 250V AC Rated Current: 6A Power Rating: 250V / 6A Terminal Type: Solder Terminals Contact Material: Iron Housing Material: Plastic Illumination: Non-Illuminated Mechanical Life: Up to 100,000 Operations Mounting Type: Panel Mount (Snap-In) Color: Blue Rocker with Black Housing Response Time: Instant RoHS Compliance: No 🔧 Applications Suitable for: Home Appliances Power Supplies Battery Chargers DIY Electronics Arduino Projects Raspberry Pi Projects ESP32 Projects Robotics Industrial Control Panels Automation Equipment Audio Equipment LED Lighting Systems Electronic Toys Test Equipment Consumer Electronics Repair & Maintenance 📦 Package Includes 1 × RS-12 Blue 2 Pin Mini Rocker Switch ⚠️ Note Verify the switch rating before connecting high-voltage or high-current loads. Disconnect power before installation or maintenance. Product color, markings, and dimensions may vary slightly depending on the manufacturing batch.
RS-12 Yellow 2 Pin Mini Rocker Switch 6A 250V ON/OFF Standard SPDT Plastic Switch
[Mechanical Switches] 🟡 RS-12 Yellow 2 Pin Mini Rocker Switch 6A 250V ON/OFF Panel Mount Switch Compact Design • 6A Current Rating • Durable Iron Contacts • Reliable Power Switching The RS-12 Yellow 2 Pin Mini Rocker Switch is a high-quality, compact ON/OFF panel mount switch designed for reliable switching in electrical and electronic applications. Manufactured using durable materials and iron contacts, this rocker switch ensures dependable performance, smooth operation, and long service life. With a 6A @ 250V AC rating, it is suitable for controlling AC or DC power in home appliances, power supplies, battery chargers, DIY electronics, industrial equipment, automation systems, and control panels. Its 2-pin SPST (Single Pole Single Throw) configuration provides simple ON/OFF switching, while the compact snap-in design allows easy installation even in limited panel space. The bright yellow rocker actuator provides clear visibility and easy identification of the switch, making it an excellent choice for control panels, machinery, DIY electronics, and industrial equipment. Designed for up to 100,000 mechanical operations, the RS-12 rocker switch delivers reliable performance for long-term use. ⭐ Features High-quality RS-12 mini rocker switch Compact 2-pin panel mount design Simple ON/OFF switching operation Rated for 6A at 250V AC Durable plastic housing Iron contact terminals Smooth and reliable switching performance Long mechanical life up to 100,000 cycles Easy snap-in installation Suitable for AC and DC switching Ideal for industrial, commercial, and DIY applications 📋 Technical Specifications Product Name: RS-12 Yellow Mini Rocker Switch Product Type: Rocker Switch Switch Function: ON/OFF Switch Configuration: SPST (Single Pole Single Throw) Number of Pins: 2 Rated Voltage: 250V AC Rated Current: 6A Power Rating: 250V / 6A Terminal Type: Solder Terminals Contact Material: Iron Housing Material: Plastic Illumination: Non-Illuminated Mechanical Life: Up to 100,000 Operations Mounting Type: Panel Mount (Snap-In) Color: Yellow Rocker with Black Housing Response Time: Instant RoHS Compliance: No 🔧 Applications Suitable for: Home Appliances Power Supplies Battery Chargers DIY Electronics Arduino Projects Raspberry Pi Projects ESP32 Projects Robotics Industrial Control Panels Automation Equipment Audio Equipment LED Lighting Systems Electronic Toys Test Equipment Consumer Electronics Repair & Maintenance 📦 Package Includes 1 × RS-12 Yellow 2 Pin Mini Rocker Switch ⚠️ Note Verify the switch rating before connecting high-voltage or high-current loads. Disconnect power before installation or maintenance. Product color, markings, and dimensions may vary slightly depending on the manufacturing batch.
902030 3.7V 600mAh LiPo Rechargeable Battery for Bluetooth Speaker, RC Drone, Toys, DIY & Robotics
[LiPo Cell] The 902030 3.7V 600mAh Lithium Polymer Battery is a lightweight rechargeable battery designed for small electronic devices and hobby projects. With a 3.7V nominal voltage and 600mAh capacity, it provides stable and reliable power for portable electronics. Its slim pouch design allows easy installation in compact devices such as Bluetooth speakers, RC drones, toys, GPS trackers, IoT devices, and robotics projects. Lithium Polymer batteries offer high energy density, low self-discharge, and long cycle life, making them ideal for modern electronic devices and DIY applications. 🔹 Key Features Nominal Voltage 3.7V Capacity 600mAh Compact lightweight LiPo battery Rechargeable lithium polymer cell High energy density Stable discharge performance Suitable for portable electronics Ideal for DIY electronics projects 🔹 Technical Specifications Parameter Specification Model 902030 Battery Type Lithium Polymer (LiPo) Nominal Voltage 3.7V Fully Charged Voltage 4.2V Capacity 600mAh Cell Type Pouch cell Charging Method CC-CV Rechargeable Yes 🔹 Applications Bluetooth speakers RC drones RC toys Robotics projects DIY electronics GPS trackers IoT devices Portable gadgets 🔹 Package Includes 1 × 902030 3.7V 600mAh Lithium Polymer Rechargeable Battery ⚠ Color and label may vary depending on stock batch. ⚠ Safety Instructions Do not short circuit battery terminals Do not charge above 4.2V Do not discharge below 3.0V Use a compatible LiPo charger module (TP4056 recommended) Do not puncture or expose battery to heat or fire Do not charge unattended