All products · 15 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Only 2 leftRobotic Arm Kit
DOF: 3–6 (kit dependent). Actuators: servo motors (SG90/MG90/MG996R class). Control: Arduino/servo driver (PCA9685 common). Supply: 5–6V for servos (separate recommended). Payload: light (50–200g typical for small kits).
Quarky
Educational STEM controller board. USB programmable. Block coding + Python/Arduino-like. Built-in sensors (mic, light, IMU) + ports for external sensors/servos. 5V input (USB/power bank). BLE/Wi-Fi optional depending on version.
Roboki
Mechanical parts kit: beams, brackets, shafts, bushings, gears, pulleys, wheels. Materials: ABS/nylon/metal mix. Build type: screw/slot. Concepts: gear ratio, torque, linkages. Compatible with DC/servo mounts.
Only 2 leftRobotic Spider Kit
Legs: 4/6/8-legged variants. Servos: 8–12 micro servos. Controller: Arduino/ESP32 compatible. Gait programming. Power: 5–6V high-current (2A–5A depending on servos). Frame: acrylic/ABS.
Only 2 leftOtto
Biped robot kit. Servos: 4 micro servos (legs/feet). MCU: Arduino Nano compatible. Sensors: ultrasonic + buzzer. Power: 5V (battery pack). Programming: Arduino IDE / block coding. Functions: walk/dance/avoid.
Only 1 leftPlay Tronix
Airframe: foam/balsa/corrugated. Components: propeller, DC motor/brushless, servo(s), control horns, pushrods. Electronics: ESC (if brushless), battery. Concepts: lift/drag/thrust, CG/balance.
TowerPro Metal Gear MG90S Mini Digital Servo Motor (180° Rotation)
[Servo Motor] ⚙️ TowerPro MG90S Mini Digital Metal Gear Servo Motor (180°) Metal Gear • Digital Servo • 180° Rotation • High Precision • Ideal for RC & Robotics The TowerPro MG90S Mini Digital Servo Motor is a compact, high-performance 9g metal gear servo designed for precise position control in robotics, RC models, automation, and DIY electronics projects. Equipped with all-metal gears, a digital control circuit, and high positioning accuracy, the MG90S offers greater durability, faster response, and higher torque than standard plastic gear servos. Operating from 4.8V to 6.0V DC, the servo delivers a stall torque of up to 2.2 kg·cm and a rotation angle of approximately 180°, making it ideal for robotic arms, pan-tilt camera systems, RC airplanes, RC cars, boats, educational kits, and embedded control applications. The standard 3-wire JR/Futaba-compatible connector allows direct interfacing with Arduino, ESP32, Raspberry Pi, STM32, and most RC receivers. Its lightweight design, compact dimensions, and excellent holding torque make the MG90S one of the most popular micro servos for hobbyists, students, and professionals alike. ⭐ Features Genuine TowerPro MG90S digital servo Durable all-metal gear transmission Approximate 180° rotation angle High positioning accuracy Fast control response High holding torque Smooth and quiet operation Lightweight and compact design Standard 3-wire servo interface Compatible with Arduino, ESP32, Raspberry Pi and RC receivers Ideal for robotics, RC models and automation projects 📋 Technical Specifications Product Type: Mini Digital Servo Motor Brand: TowerPro Model: MG90S Gear Type: Metal Gear Rotation Angle: Approximately 180° Operating Voltage: 4.8V–6.0V DC Stall Torque: 1.8 kg·cm @ 4.8V 2.2 kg·cm @ 6.0V Operating Speed: 0.10 sec/60° @ 4.8V 0.08 sec/60° @ 6.0V Control Signal: PWM (50Hz Standard Servo Signal) Dead Band Width: 1µs Connector Type: JR / Futaba Compatible Cable Length: Approximately 25cm Dimensions: 22.8 × 12.2 × 28.5 mm Weight: Approximately 13.4g Operating Temperature: 0°C to +55°C These specifications are consistent with the manufacturer's published specifications. 🔧 Applications Suitable for: Arduino Projects ESP32 Projects Raspberry Pi Projects Robotic Arms Humanoid Robots RC Airplanes RC Cars RC Boats Pan-Tilt Camera Systems Automatic Door Mechanisms DIY Electronics Educational Robotics Smart Automation Projects Mechatronics Projects 📦 Package Includes 1 × TowerPro MG90S Mini Digital Servo Motor 1 × Servo Horn Set Single Arm Horn Double Arm Horn Four Arm Horn 1 × Mounting Screw Set ⚠️ Note Operate the servo only within the recommended 4.8V–6.0V DC supply range. For stable operation, use an external regulated power supply when driving the servo from microcontrollers. Product appearance, cable color, or accessories may vary slightly depending on the manufacturing batch. Counterfeit MG90S servos are common in the market. Purchase from trusted suppliers for genuine performance.
Stepper Motor(28YBJ-48) with SMD ULN2003 Driver Board
[Servo Motor] The 28BYJ-48 Stepper Motor with ULN2003 Driver Board is a compact, reliable, and low-cost 5V geared stepper motor kit designed for Arduino, robotics, automation, and embedded control applications. This motor features a 4-phase, 5-wire configuration with an integrated reduction gearbox, delivering high torque and precise positioning at low speeds. One of the biggest advantages of a stepper motor is its ability to operate accurately in an open-loop control system, eliminating the need for expensive feedback sensors or encoders. The motor position is precisely controlled by simply counting the input step pulses. The included ULN2003 driver board acts as a signal amplifier, allowing low-power control signals from microcontrollers such as Arduino, Raspberry Pi, ESP32, and 8051 to safely drive the stepper motor. The driver board also features four LED indicators (A, B, C, D) that display the working status of each phase in real time, making testing and debugging easy. With its compact size, plug-and-play connector, stable operation, and high reliability, this stepper motor kit is ideal for robot arms, CNC projects, camera sliders, 3D mechanisms, automation systems, and educational electronics projects. ⭐ KEY FEATURES ✔ 28BYJ-48 Mini Geared Stepper Motor – 5V DC✔ 4-Phase, 5-Wire Configuration✔ Includes ULN2003 Stepper Motor Driver Board✔ Open-Loop Precise Control – No encoder required✔ Built-in Gear Reduction for Higher Torque✔ Plug-and-Play Interface – Easy connection✔ Phase LED Indicators on driver board✔ Compact size, lightweight & reliable✔ Perfect for Arduino, robotics & automation projects 🔧 TECHNICAL SPECIFICATIONS Stepper Motor Model: 28BYJ-48 Supply Voltage: 5V DC (commonly used version) Number of Phases: 4 Wires: 5 Stride Angle: 5.625° × 1/64 (with gearbox) Gear Reduction Ratio: 1:64 (approx.) Dimensions: 44 × 44 × 28 mm (L × B × H) Type: Geared Stepper Motor Driver Board Driver Model: ULN2003 Input Interface: Standard 5-pin connector Indicators: 4 Phase LED status indicators Function: Signal amplification & motor driving 🎯 APPLICATIONS Arduino & microcontroller projects Robotics & automation systems Camera sliders & pan-tilt systems CNC & 3D motion mechanisms Educational electronics kits Smart home & IoT projects 📦 PACKAGE INCLUDES 1 × 28BYJ-48 5V Stepper Motor 1 × ULN2003 Stepper Motor Driver Board
Stepper Motor(28YBJ-48) with ULN2003 Driver Board
[Servo Motor] The 28BYJ-48 Stepper Motor with ULN2003 Driver Board is a compact, reliable, and low-cost 5V geared stepper motor kit designed for Arduino, robotics, automation, and embedded control applications. This motor features a 4-phase, 5-wire configuration with an integrated reduction gearbox, delivering high torque and precise positioning at low speeds. One of the biggest advantages of a stepper motor is its ability to operate accurately in an open-loop control system, eliminating the need for expensive feedback sensors or encoders. The motor position is precisely controlled by simply counting the input step pulses. The included ULN2003 driver board acts as a signal amplifier, allowing low-power control signals from microcontrollers such as Arduino, Raspberry Pi, ESP32, and 8051 to safely drive the stepper motor. The driver board also features four LED indicators (A, B, C, D) that display the working status of each phase in real time, making testing and debugging easy. With its compact size, plug-and-play connector, stable operation, and high reliability, this stepper motor kit is ideal for robot arms, CNC projects, camera sliders, 3D mechanisms, automation systems, and educational electronics projects. ⭐ KEY FEATURES ✔ 28BYJ-48 Mini Geared Stepper Motor – 5V DC✔ 4-Phase, 5-Wire Configuration✔ Includes ULN2003 Stepper Motor Driver Board✔ Open-Loop Precise Control – No encoder required✔ Built-in Gear Reduction for Higher Torque✔ Plug-and-Play Interface – Easy connection✔ Phase LED Indicators on driver board✔ Compact size, lightweight & reliable✔ Perfect for Arduino, robotics & automation projects 🔧 TECHNICAL SPECIFICATIONS Stepper Motor Model: 28BYJ-48 Supply Voltage: 5V DC (commonly used version) Number of Phases: 4 Wires: 5 Stride Angle: 5.625° × 1/64 (with gearbox) Gear Reduction Ratio: 1:64 (approx.) Dimensions: 44 × 44 × 28 mm (L × B × H) Type: Geared Stepper Motor Driver Board Driver Model: ULN2003 Input Interface: Standard 5-pin connector Indicators: 4 Phase LED status indicators Function: Signal amplification & motor driving 🎯 APPLICATIONS Arduino & microcontroller projects Robotics & automation systems Camera sliders & pan-tilt systems CNC & 3D motion mechanisms Educational electronics kits Smart home & IoT projects 📦 PACKAGE INCLUDES 1 × 28BYJ-48 5V Stepper Motor 1 × ULN2003 Stepper Motor Driver Board
TowerPro MG996R Digital High Torque Servo Motor
[Servo Motor] TowerPro Servo Motors are optimum-quality and affordable cost servos.! They are suitable for a wide range of applications, including RC aircraft, automobiles, and robotics, Or just to have some fun with whatever crazy project you’re working on. When you purchase TowerPro motors in India, they are almost usually NOT ORIGINAL, and these are no exception… These are NOT ORIGINAL Tower Pro Servos, either. However, they are dead cheap and Serve the purpose. We put them to the test and found them to be of good quality for the price. Wire Description Red – Positive Brown – Negative Orange – Signal Features: Gear Type: Metal gear Servo Plug: JR (Fits JR and Futaba) Servo arms & screws included, and fit with Futaba servo arm It’s a universal “S” type connector that fits most receivers, including Futaba, JR, Hitec , GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, and Spektrum. CE & RoHS approved We have upgraded our servo gear set and shaft to aluminum 6061-T6. It is stronger and lighter than copper. Package Includes: 1 x TowerPro MG996R Digital High Torque Servo Motor and Accessories Parts(as shown in the image)
Mini MP1584 DC-DC 3A Adjustable Buck Module
[Step Down Buck Converter] The Mini MP1584 DC-DC 3A Adjustable Buck module is ultra small adjustable 0.8V to 20V output DC to DC step-down Buck converter that uses an MP1584EN high frequency switching regulator and integrated high voltage power MOSFET. It features a soft start, thermal shutdown, and under-voltage lockout (UVLO) to protect the module from operating at insufficient supply voltage. Small size, lightweight, low internal power consumption, and wide input voltage range of 4.5V to 28V make this module suitable for a variety of different applications where small size and lightweight voltage conversion is needed, including RC cars and airplanes, quadcopters, robotics, Arduino modules, and DIY devices. Applications: DIY 8051 / AVR / ARM / PIC / Arduino / Raspberry-Pi projects Robotics Breadboard power supply Manual speed adjustment of small DC motors Power Supply for RC project planes, cars, helicopters Universal Battery Elimination Circuit (UBEC) for 2S-6S lipo battery pack Receiver/servo power supply Communications equipment power supply Mobile equipment power supplies Note: PCB board color may be different from the actual product. Features: Wide 4.5V to 28V Operating Input Range High-Efficiency Pulse Skipping Mode for Light Load Ceramic Capacitor Stable Internal Soft-Start Internally Set Current Limit without a Current Sensing Resistor
Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control
[Servo Motor] Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control offers 3 modes to check servos or ESC. The Manual Mode allows you to turn the knob to different speeds and check the reaction time. The Neutral mode makes the servo go back to the neutral point. The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible. Plus, this servo tester can connect to up to 3 servos simultaneously. You can also connect up to 3 ESCs to test and compare their reaction time respectively. Click and order now! Operation Modes :- Automatic mode:- Operates servos to their end point and back “window wiper” mode: Make the servo swing like window wipers in the biggest angle Manual mode:- Turn the knob with different speed, check the reaction time Neutral / Center mode:- Centers servos to their neutral position Ideal for when setting servos up in a model Features of Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control :- Digital Multi Servo Tester ESC RC Consistency CCPM Master Speed Control Operating Voltage: DC 4.8-6V Offer 3 modes to check servos or ESC The Manual Mode allows you to turn the knob to different speeds and check the reaction time The Neutral mode makes the servo go back to the neutral point The Automatic ’’Window Wiper’’ Mode makes the servo swing like a window wiper in the largest angle possible Connect to up to 3 servos simultaneously Connect up to 3 ESCs to test and compare their reaction time respectively Built with LED indicators Output signal: 1.5ms±0.5ms Size: 36.5 x 31.0 x 22mm
SG90 9g Micro Servo Motor 180° Plastic Gear Servo for Arduino, Robotics & RC Projects
[Servo Motor] The SG90 9g Micro Servo Motor is a lightweight and compact servo designed for Arduino, robotics, RC models, automation systems, and DIY electronics projects. It provides precise position control with approximately 180° rotation and low power consumption. 🔹 Product Description The SG90 9g Micro Servo Motor is one of the most popular servo motors used in electronics, robotics, and educational projects. Featuring a lightweight design and durable plastic gears, it offers accurate position control and reliable operation for a wide range of applications. In addition, the SG90 uses standard PWM control signals, making it compatible with Arduino, ESP32, Raspberry Pi, STM32, and other microcontroller platforms. As a result, it is widely used in robotic arms, obstacle-avoiding robots, RC aircraft, pan-tilt camera systems, and automation projects. Because of its compact size and lightweight construction, the servo can be easily integrated into small projects where space and weight are important factors. Furthermore, it delivers smooth motion and precise angular positioning across its operating range. The SG90 supports approximately 0° to 180° rotation and includes servo horns and mounting accessories for quick installation. Moreover, its low power consumption makes it suitable for battery-powered applications. 🔹 Key Features Lightweight 9g micro servo motor Approximately 180° rotation range Durable plastic gear mechanism Standard PWM control interface Fast response and precise positioning Low power consumption Compact and lightweight design Compatible with Arduino, ESP32, Raspberry Pi, and STM32 Easy installation with included accessories Ideal for robotics and RC applications 🔹 Technical Specifications Model: SG90 Motor Type: Micro Servo Motor Operating Voltage: 4.8V – 6V DC Typical Operating Voltage: 5V DC Stall Torque: 2.5 kg·cm Operating Speed: 0.1 sec / 60° Rotation Angle: 0° – 180° Gear Type: Plastic Gear Control Signal: PWM Connector Type: Standard 3-Pin Servo Connector Cable Length: 15cm Weight: 9g Body Material: Plastic 🔹 Applications This servo motor is suitable for: Arduino projects ESP32 projects Robotics applications Robotic arms RC airplanes RC cars and boats Pan-tilt camera systems Automation projects Educational electronics projects 🔹 Package Includes 1 × SG90 9g Micro Servo Motor Servo Horn Set Mounting Screws