All products · 19 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Only 2 leftRC Car Kit
Chassis: 2WD/4WD. Motors: TT DC geared motors (3–6V) or higher. Driver: L298N/L293D. Controller: Arduino/ESP32 optional. Remote: IR/2.4GHz/Bluetooth. Power: 2×18650 or 4×AA. Optional ultrasonic/line sensor.
Out of stockCR2032 Lithium Coin Cell (10 pc)
3V 220 mAh CR2032 coin cells. Motherboard CMOS, remotes, IR sensors.
Out of stockHDMI Switcher 3×1 4K@60Hz with Remote
3 inputs → 1 output HDMI switcher, IR remote, auto + manual modes.
Out of stockDeepcool 5V ARGB Controller (DA-100)
5V 3-pin ARGB controller, 16 modes, magnetic mount, wireless remote.
Out of stockRJ45 / RJ11 Cable Tester
Network cable continuity tester, LED per wire, remote terminator.
Out of stockGold AP-55 TPA3116D2 2×50W Bluetooth Stereo Digital Amplifier Board with USB, TF Card, FM & Remote
[Amplifier Board] Gold AP-55 TPA3116D2 2×50W Bluetooth Stereo Digital Amplifier Board with USB, TF Card, FM & Remote The Gold AP-55 is a compact Class-D stereo digital audio amplifier board based on the TPA3116D2 amplifier IC, designed for DIY Bluetooth speakers, home audio systems, portable speakers, bookshelf speakers, multimedia systems, and custom audio projects. Available product listings consistently identify the AP-55 as a dual-channel 50W + 50W amplifier, with a DC input range around 8–24V or 12–24V depending on the listing/version. The AP-55 combines the power amplifier with a multimedia player supporting Bluetooth 5.0, USB, TF/SD card, FM radio and AUX input. The Bluetooth device name is reported as GD-82EM, while the FM tuner covers 87.5–108.0MHz. It also includes an infrared remote control and a digital display for convenient operation. The TPA3116D2 Class-D amplifier provides efficient stereo amplification, making the board suitable for building compact but powerful audio systems. One detailed listing specifies support for 4Ω–8Ω speakers, with the commonly advertised maximum output of 50W per channel. ⭐ Key Features Gold AP-55 amplifier module TPA3116D2 Class-D amplifier IC 50W + 50W dual-channel stereo output Supports 4Ω–8Ω speakers Bluetooth 5.0 wireless audio Bluetooth device name: GD-82EM Built-in USB music player Built-in TF / SD card player Built-in FM radio FM frequency range 87.5–108.0MHz 3.5mm AUX input Infrared remote control Digital display Supports MP3 / WMA / WAV Power-off memory function Remembers the previous song and volume Compact design for DIY speaker projects High-efficiency Class-D amplification 📋 Technical Specifications Product Type: Stereo Class-D Digital Amplifier Board Model: Gold AP-55 Amplifier IC: TPA3116D2 Amplifier Class: Class-D Number of Channels: 2 / Stereo Output Power: 50W + 50W Maximum Total Output: 100W Speaker Impedance: 4Ω–8Ω Input Voltage: DC 8–24V (some listings specify 12–24V; verify the exact board version before use) Bluetooth Version: 5.0 Bluetooth Name: GD-82EM Bluetooth Range: Up to approximately 10–15m under suitable conditions Audio Formats: MP3 / WMA / WAV USB Support: Yes TF/SD Card Support: Yes FM Radio: Yes FM Frequency: 87.5–108.0MHz AUX Input: 3.5mm / Wired Audio Input Remote Control: IR Remote Remote Range: Approximately 4–7m Display: Digital Display Power-Off Memory: Yes Memory Function: Last song and volume Audio Input Modes: Bluetooth / USB / TF Card / FM / AUX Output: Dual-Channel Stereo Efficiency: Greater than 90% according to one detailed listing SNR: Approximately 102dB according to one detailed listing Distortion: Below 0.1% at normal listening levels according to one detailed listing Board Size: Approximately 70 × 50 × 20mm with shell, according to one listing 🎵 Audio & Playback Functions The AP-55 can switch between Bluetooth, USB, TF/SD Card, FM Radio and AUX sources. When Bluetooth mode is selected, users can pair a phone or other compatible device with GD-82EM. USB and TF/SD cards can be used for local music playback, while AUX provides a wired audio input. 📻 FM Radio The built-in FM tuner supports the 87.5–108.0MHz broadcast band. FM stations can be searched and selected using the onboard controls or remote control. 🎛️ Controls & Remote The module provides controls for functions such as previous track, next track, volume up, volume down, play/pause, mode selection and FM station selection. The infrared remote provides additional wireless control of playback, volume, mode and other supported functions. 🔧 Applications DIY Bluetooth Speakers High-Power Bluetooth Speaker Projects Portable Speaker Systems Bookshelf Speaker Systems Home Audio Projects Multimedia Speaker Systems USB MP3 Speaker Systems TF/SD Card Music Players FM Radio Speaker Projects Car Audio Projects Custom Wooden Speaker Cabinets Desktop Audio Systems Electronics DIY Projects 🛠️ Installation Connect a suitable DC power supply within the specified voltage range and observe the correct polarity. Connect the left and right speaker outputs to compatible 4Ω–8Ω speakers. Select Bluetooth, USB, TF/SD, FM or AUX according to the desired audio source. For maximum advertised output, a suitable 24V high-current power supply is recommended by one vendor; at lower supply voltages, available output power will be lower. 📦 Package Includes 1 × Gold AP-55 TPA3116D2 2×50W Bluetooth Amplifier Board 1 × IR Remote Control 1 × Required Connecting Wires/Cables (package contents may vary by seller/version) ⚠️ Precautions Verify the exact input voltage requirement of your AP-55 version before powering it. Do not exceed 24V DC where the board specification limits input to 24V. Check power polarity carefully before connection. Use speakers with a compatible 4Ω–8Ω impedance. Do not short-circuit the speaker output terminals. Ensure adequate ventilation during high-power operation. Use a suitable high-current power supply for high-output operation. Do not connect the speaker outputs together or directly to ground. Keep the board away from moisture and conductive materials. Incorrect wiring or excessive voltage can permanently damage the amplifier IC.
ESP32-C3 Super Mini Development Board With Headers Pins
[ESP Modules] Ultra Compact • Wi-Fi & BLE 5.0 • USB Type-C • Perfect for IoT & Embedded Projects The ESP32-C3 Super Mini Development Board is a compact, feature-rich development board built around the powerful ESP32-C3 SoC from Espressif. Powered by a 32-bit RISC-V single-core processor running at up to 160MHz, it combines 2.4GHz Wi-Fi, Bluetooth 5.0 Low Energy (BLE), and low-power operation in an ultra-small form factor. Designed for IoT, smart home, wireless communication, automation, and embedded system development, the ESP32-C3 Super Mini offers 4MB Flash memory, 400KB SRAM, multiple GPIOs, ADC, PWM, UART, SPI, and I2C interfaces for connecting sensors, displays, relays, and other peripherals. The onboard USB Type-C interface simplifies programming and power supply, while the built-in USB-to-Serial functionality enables quick firmware uploading without requiring additional programmers. Fully compatible with Arduino IDE, ESP-IDF, PlatformIO, and MicroPython, it is suitable for beginners, students, makers, and professional developers. Its ultra-compact breadboard-friendly design makes it ideal for portable and space-constrained projects where performance, wireless connectivity, and energy efficiency are essential. Note: Programming, software configuration, driver installation, firmware flashing, and coding-related issues are not covered under return or replacement. Users are expected to troubleshoot software-related issues independently. ⭐ Features Powerful ESP32-C3 32-bit RISC-V processor CPU frequency up to 160MHz Built-in 2.4GHz Wi-Fi (802.11 b/g/n) Integrated Bluetooth 5.0 Low Energy (BLE) Ultra-compact Super Mini design Breadboard-friendly layout USB Type-C interface for programming and power 4MB onboard Flash memory 400KB SRAM Multiple GPIO, ADC, PWM, UART, SPI & I2C interfaces Low power consumption with Deep Sleep mode Onboard programmable LED Compatible with Arduino IDE, ESP-IDF, PlatformIO & MicroPython Ideal for IoT, automation, robotics, and wireless applications 📋 Technical Specifications Product Type: Development Board Board Model: ESP32-C3 Super Mini Microcontroller: ESP32-C3 Processor Architecture: 32-bit RISC-V CPU Frequency: Up to 160MHz Core: Single Core Flash Memory: 4MB SRAM: 400KB Wi-Fi Standard: IEEE 802.11 b/g/n (2.4GHz) Bluetooth: Bluetooth 5.0 Low Energy (BLE) Operating Voltage: 3.3V Input Voltage: 5V via USB Type-C or 3.3V External USB Interface: USB Type-C GPIO: Multiple Digital GPIO Pins Analog Input: Up to 6 ADC Channels PWM: Supported UART: Supported SPI: Supported I2C: Supported USB-to-Serial: Onboard Onboard LED: User Programmable (GPIO8) Power Consumption: Ultra Low (Deep Sleep ≈ 43µA) Dimensions: Approx. 22.5 × 18 mm Headers: Pre-Soldered 🔧 Applications Suitable for: Internet of Things (IoT) Smart Home Automation Wireless Sensor Networks Home Automation Systems Bluetooth Low Energy Devices Wi-Fi Enabled Controllers Robotics Projects Data Logging Systems Remote Monitoring Industrial Automation Portable Embedded Devices Educational Learning DIY Electronics Projects Wearable Electronics Rapid Prototyping 📦 Package Includes 1 × ESP32-C3 Super Mini Development Board Pin Headers ⚠️ Note Programming, firmware installation, software configuration, and driver-related issues are not covered under warranty, return, or replacement. Please verify board compatibility and install the appropriate development environment before programming. Soldered and non-soldered header pin depend on stock
315MHz 4 Channel Wireless RF Remote Control Kit with Receiver Module (Non-Locking Mode)
[RF Module] 📡 315MHz 4 Channel Wireless RF Remote Control Kit with Receiver Module (Non-Locking Mode) 4 Channel RF Remote • 315MHz ASK Communication • 5V Receiver • Non-Locking Mode • Long Range Wireless Control The 315MHz 4 Channel Wireless RF Remote Control Kit is a reliable wireless control solution consisting of a 4-button RF transmitter and a super regenerative ASK receiver module. Operating at 315MHz, this kit is ideal for remote switching, automation, robotics, security systems, and DIY wireless control projects. The receiver module features four independent digital outputs (D0–D3) that correspond to the four buttons on the transmitter. When a button is pressed, the respective output pin goes HIGH, returning LOW immediately after the button is released. This Non-Locking (Momentary/Jog) operation makes the module perfect for applications requiring temporary switching such as electric door control, motor jogging, relay activation, and microcontroller interfacing. The receiver operates from a 5V DC supply and features a high-sensitivity ASK receiver with a Valid Transmission (VT) output pin for reliable signal detection. The transmitter uses a fixed-code encoder for secure communication and easy operation. Ideal for Arduino, ESP32, Raspberry Pi, AVR, PIC, industrial automation, wireless switching, and educational electronics projects. ⭐ Features 4-channel wireless RF remote control kit Operating frequency: 315MHz ASK (Amplitude Shift Keying) modulation Fixed-code RF transmitter Non-Locking (Momentary/Jog) operating mode Four independent digital outputs (D0–D3) High-sensitivity super regenerative receiver 5V DC receiver operating voltage VT (Valid Transmission) status output Compact PCB design Easy interface with microcontrollers Long wireless transmission range (environment dependent) Suitable for DIY and industrial automation 📋 Technical Specifications RF Transmitter Product Type: RF Wireless Remote Control Operating Frequency: 315MHz Number of Buttons: 4 Channels: 4 Modulation: ASK (Amplitude Shift Keying) Encoding Type: Fixed Code Operating Mode: Non-Locking (Momentary) Power Supply: 12V A23 Battery (Not Included) RF Receiver Module Operating Voltage: 5V DC Operating Frequency: 315MHz Receiver Type: Super Regenerative ASK Receiver Receiver Sensitivity: -98dBm Output Channels: D0, D1, D2, D3 VT Output: Yes (Valid Signal Output) Antenna Connection: External ANT Pin Recommended Antenna Length: Approx. 17cm (Quarter-Wave) Module Dimensions: Approx. 41 × 22 × 7 mm Receiver Pin Configuration VT – Valid Signal Output D3 – Channel 4 Output D2 – Channel 3 Output D1 – Channel 2 Output D0 – Channel 1 Output +5V – Power Input GND – Ground ANT – External Antenna Connection 🔧 Operating Modes Non-Locking (Momentary/Jog Mode) Press a button → Corresponding output goes HIGH. Release the button → Output immediately returns LOW. Ideal for momentary control applications. Note: This product is supplied in Non-Locking Mode only. 🔧 Applications Suitable for: Arduino Projects ESP32 Projects Raspberry Pi Projects Wireless Relay Control Home Automation Industrial Automation Remote Door Control Electric Door Locks Wireless Switching Robotics Motor Control Lighting Control Alarm Systems Security Systems DIY Electronics Educational Projects 📦 Package Includes 1 × 4-Button 315MHz RF Wireless Remote Control 1 × 315MHz Super Regenerative Receiver Module ⚠️ Note Battery is included. A 12V A23 battery is required for operation. Avoid bending or touching the receiver's onboard inductor (copper coil), as this may affect receiver sensitivity. Wireless operating range depends on antenna quality, obstacles, and surrounding RF interference. Product appearance may vary slightly depending on the manufacturing batch.
30A BLDC ESC Electronic Speed Controller with Connectors
[ESC] 30A BLDC ESC Electronic Speed Controller is specifically made for quadcopters and multi-rotors. Which provides faster and better motor speed control giving better flight performance compared to other available ESCs. 30A BLDC ESC Electronic Speed Controller can drive motors that consume current up to 30A. It works on 2-3S LiPo batteries. This electronic speed controller offers a battery eliminator circuit (BEC) that provides 5V and 2A to the receiver so we don’t need an extra receiver battery. This version of the ESC also includes backward-polarity protection and protection on the 5V receiver line, this means that if you accidentally attach a battery backward it won’t destroy your motor controller and other BEC won’t affect the ESC. If you are wandering to build a drone and don’t know what will be the best ESC for you then worry no more, we have got your back. At , we have everything for you to get started with your drone project. This particular ESC is recommended with A2212 brushless motor (1000kv, 1400kv, 2200kv). For your Convenience Same ESC without Connectors is also available Connections: 30A ESC wiring (Other products not included in this package): Warning: When we connect BLDC ESC directly to the remote control receiver; never ever switch off the remote control before switching off power to the BLDC ESC. Depending on the model of the remote control; it may result in full throttle applied to the motor and it will rotate at full speed. Features: High-quality MOSFETs for BLDC motor drive. Backward-polarity protection and protection on the 5V receiver line. High-performance microcontroller for best compatibility with all types of motors at greater efficiency. Fully programmable with any standard RC remote control. Heat sink with a high-performance heat transmission membrane for better thermal management. 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircraft and helicopters. We can configure the throttle range to be compatible with any remote control available in the market. Package Includes: 1 x 30A BLDC ESC Electronic Speed Controller with Connectors.
Bluetooth MP3 Decoding Board Module with inbuilt SD Card Slot / USB / FM / and Remote Control
[Audio, Audio Receiver] Bluetooth MP3 Decoder Board Module with USB, SD Card, FM Radio, AUX & Remote Control The Bluetooth MP3 Decoder Board Module is a compact and versatile multimedia audio player designed to add multiple audio playback options to DIY speakers, amplifier systems, home theaters, car audio systems, portable speakers, and custom audio projects. It combines Bluetooth, USB, SD/TF card, AUX input, and FM radio functions in a single convenient module. The module can be connected to a compatible audio amplifier board to create a complete multimedia audio system. It features a clear LCD display for displaying playback information, input mode, track details, and FM frequency. An included IR remote control allows convenient wireless operation from a distance. With support for popular audio formats including MP3, WMA, WAV, FLAC, and APE, the module provides flexible playback options for different music sources. ⭐ Key Features Bluetooth wireless audio receiver Built-in USB port for music playback Built-in SD/TF card slot FM radio function AUX audio input Supports USB / SD / Bluetooth / FM / AUX source selection Stereo digital audio output LCD display for playback information Includes IR remote control Supports folder selection and organized playback Supports Bluetooth stereo audio Hands-free calling support as specified Compact design for easy installation Suitable for DIY audio projects 📋 Technical Specifications Product Type: Bluetooth MP3 Decoder Board Bluetooth: Bluetooth Audio Receiver Audio Output: Stereo Digital Audio Output Input Sources: Bluetooth / USB / SD (TF) Card / AUX / FM USB Support: Yes SD/TF Card Slot: Yes FM Radio: Yes AUX Input: Yes Display: Seven segment Display Remote Control: IR Remote Included Audio Formats: MP3 / WMA / WAV / FLAC / APE Bluetooth Function: Wireless Audio Playback / Hands-Free Calling Playback Function: Folder Selection & Music Playback Installation: Audio Amplifier / DIY Speaker System Application: DIY Speakers, Home Theater, Car Audio, Portable Audio Systems Mounting Type: Panel / Enclosure Mount Power Supply: Refer to the specific module version before connection Output Connection: Connect to a compatible amplifier input Module Type: Multi-Function Audio Decoder Board 🔧 Applications DIY Bluetooth Speakers Portable Speaker Systems Home Theater Upgrades Car Audio Modification Amplifier Projects Multimedia Speaker Repair Custom Audio Systems DIY Music Players Portable Audio Systems Electronic Audio Projects 🛠️ How It Works The module works as a multi-function audio source and decoder. Select Bluetooth, USB, SD/TF card, AUX, or FM radio as the required audio source. The module decodes the selected audio signal and provides a stereo audio output that can be connected to a compatible amplifier board. For a DIY speaker project, connect the decoder module to a suitable amplifier and then connect the amplifier to the speakers. The included IR remote can be used to control playback, mode selection, track selection, volume, and other supported functions. 🔌 Installation Connect the module to a compatible power supply according to the specifications of the particular module version. Connect the audio output to the input of a suitable amplifier board and connect the amplifier output to the speakers. Insert a compatible USB drive or SD/TF card containing supported audio files, or pair the module with a Bluetooth device. AUX input and FM radio can also be selected using the module controls or remote control. 📦 Package Includes 1 × Bluetooth MP3 Decoder Board Module with USB / SD / FM / AUX 1 × IR Remote Control 1 × Power & Signal Connecting Cable ⚠️ Precautions This module is not recommended for beginners without basic electronics knowledge. Check the module's required supply voltage and polarity before powering it. Ensure all wiring is correct before switching on the power. Connect the audio output to a compatible amplifier input. Do not connect speakers directly to the decoder output unless confirmed by the specific module version. Avoid short circuits between power and signal connections. Do not expose the board to water or excessive moisture. We are not responsible for damage caused by incorrect wiring, improper installation, or misuse.
Out of stock32700 32650 3.2V Rechargeable 6000mAh LifePO4 Battery Cell for EV
[LiFePO4 Battery Cell] 32700 32650 3.2 V 6000 MAH LiFePO4 Battery This Standard 32700 32650 3.2 V Rechargeable 6000mAh LifePO4 Battery Cell is a single cell powerful battery cell with a massive 6000 mAh capacity. This LifePO4 battery is very convenient to install in your project where 3.2 Volt with high capacity is needed. The Standard 6000mAh 3.2V Rechargeable LifePO4 Battery is a source of power for various portable devices including flashlights, hobby transmitters, and receivers, etc. This Battery can be the best Replacement to the normal Non-Rechargeable AA Battery used in many applications such as in RC Transmitter/Reciever Remote, which can make your flight driving experience very cost-effective and efficient in terms of power output than that of conventional AA batteries. IMPORTANT: Never completely discharge the LifePO4 battery ( below 2.5V under load ). Charge fully to 4.2V before first use. Never attach any metal moving part like a magnet to the battery contact. Never use force to install (insert) LifePO4 battery. Do not use old and new battery cells together. Use only a high-quality battery charger. Do not expose to heat. Do not short (connect) positive (top), and negative (bottom) battery terminals (contacts). Keep battery that is not in use in the plastic holder (or any insulating [plastic] container). Do not charge the battery over 4.22V (another reason to use a high-quality battery charger). Don’t charge unattended. Do not store your LifePO4 batteries fully charged (for an extended period of time). Store in a cold and dry place at approximately 3.7V (storage charge). After the battery is discharged-don’t leave it discharged, charge it as soon as possible. FEATURES: Shape: Cylindrical Battery Battery Type: Lithium-Ion Rechargeable Battery High performance and capacity Flat top to suit many devices fitting PACKAGE INCLUDES: 1 x 32700 or 32650 3.2 V Rechargeable 6000mAh LifePO4 Battery Cell for EV. Note: Color and Print on the Cells may vary with every lot. We ship it randomly
ESP8266 WiFi 5V 1 Channel Relay Module Good Quality
[Relay Module] General Info : Onboard ESP8266 WIFI module, AP mode can be connected at the same time 5 client The module has two ways to work: (i) mobile phone directly mounted on the WIFI module; (ii) mobile phone and WIFI module also carried on the router. How to use : Onboard ESP8266 WIFI module has three operating modes: STA (client), AP (hot), STA + AP (client + hot), according to the work of the module to select the corresponding WIFI module mode of operation The The module needs to use the serial debugging software on the computer and USB to TTL module to send AT commands to configure the WIFI module, USB to TTL module RX, TX, GND pin, then the module on the TX, RX, GND pin, IN +, IN – 5V power supply. Usage Instructions 1) Hardware Connection: Insert the pre-programmed ESP-01/01S module into the onboard 2×4 pin female header (as shown in the diagram below). 2) Power Supply : Connect a DC 5V-12V power source to the module, with the positive terminal to VCC and the negative terminal to GND. 3) Mobile WiFi Connection : Open your phone's WLAN settings, search for and connect to the ESP8266-XXXX hotspot (default password: 12345678). 4) Launch Control APP : Run the pre-installed ESP8266 Controller application on your Android phone. 5) Configure IP Address : Enter the default IP address: 192.168.1.1 in the APP to remotely control the relay switch via your phone. Transmission distance: Open environment, the mobile phone mounted on the WIFI module when the maximum transmission distance of 400m. When the WiFI module and mobile phone at the same time carried on the router when the transmission distance according to the router’s signal weakly; Board function description : IN +, IN-: 5V power input; TX, RX, GND: Serial debug pin; Onboard the ESP8266 WIFI module has three work modes: STA (client), AP (hot), the STA + Ap( hot +client), according to the workings of a module to the corresponding choice of WIFI module working mode. Module need before use serial debugging software and USB to TTL module send serial command was carried out on the WIFI module configuration (don’t power outages after configuration is complete, as some of the parameters of WIFI module cannot be saved when the power is cut off), mobile phone and WIFI module after establishing a network connection can use the phone APP control relay. Control Commands : When cell phone equipped with WiFi module sends commands in the following order: (The default baud rate 115200) AT+CWMODE=2, namely AP mode is selected. AT+RST, reset. AT+CIPMUX=1, open multiple connections. AT+CIPSERVER=1,8080, configure the TCP server, set the port. AT+CIOBAUD=9600 set the baud rate to 9600. (working in relays to control the baud rate 9600). AT+CIFSR to view the AP mode IP address, such as the APIP, “192.168.4.1”. Cell phone WIFI signal connection name starts with AI-THINKER or ESP8266. In the “TCP connection” address and port into the APP, such as 192.168.4.1 and 8080. Click on the grey box relays can be controlled. Features: Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay Diode effusion protection. Short response time
ESP8266 NodeMCU CP2102 ESP-12E WiFi Development Board
[ESP Modules] ESP8266 NodeMCU CP2102 ESP-12E WiFi Development Board ESP8266 ESP-12E • CP2102 USB Interface • Built-in WiFi • Arduino & Lua Compatible • IoT Development Board The ESP8266 NodeMCU CP2102 ESP-12E WiFi Development Board is a compact and powerful development board designed for IoT (Internet of Things), wireless communication, home automation, robotics, and embedded system projects. Based on the highly popular ESP8266 ESP-12E WiFi module, it combines a 32-bit microcontroller, WiFi connectivity, and a CP2102 USB-to-Serial interface on a single breadboard-friendly board. The board comes preloaded with NodeMCU firmware, allowing easy programming using Lua scripting, while also offering full compatibility with the Arduino IDE, making it suitable for both beginners and advanced developers. With integrated 802.11 b/g/n WiFi, TCP/IP networking, multiple GPIO pins, PWM, I2C, SPI, and UART interfaces, it provides everything required for rapid IoT prototyping and wireless application development. The onboard CP2102 USB interface, 3.3V voltage regulator, and logic-level conversion circuitry allow direct connection to a computer for programming and power, eliminating the need for external USB-to-Serial converters. ⭐ Features ESP8266 ESP-12E WiFi module Built-in CP2102 USB-to-Serial interface 802.11 b/g/n WiFi connectivity Integrated TCP/IP protocol stack 32-bit processor with onboard memory Compatible with Arduino IDE, Lua, and NodeMCU firmware Breadboard-friendly compact design Multiple GPIO pins Supports PWM, I2C, SPI, and UART Onboard 3.3V voltage regulator Logic-level conversion circuitry included Low power consumption Ideal for IoT and wireless projects Easy plug-and-play programming 📋 Technical Specifications Product Type: WiFi Development Board Model: ESP8266 NodeMCU ESP-12E Microcontroller: ESP8266EX WiFi Standard: IEEE 802.11 b/g/n USB Interface: CP2102 Operating Voltage: 3.3V Input Voltage: 5V via Micro USB Flash Memory: 4MB CPU: 32-bit Tensilica L106 Clock Frequency: 80MHz / 160MHz GPIO Pins: Multiple Digital I/O Communication Interfaces: UART, SPI, I2C PWM Support: Yes ADC: 1 Channel (10-bit) USB Connector: Micro USB Firmware: NodeMCU (Preloaded) Programming Support: Arduino IDE, Lua, ESP8266 SDK Board Size: Approx. 58 × 31 mm 🔧 Applications IoT (Internet of Things) Projects Home Automation Smart Lighting Systems WiFi Sensor Nodes Wireless Data Logging Robotics Projects Arduino WiFi Projects ESP8266 Development Remote Monitoring Systems MQTT Applications Web Server Projects Smart Agriculture Industrial Automation DIY Electronics Educational Projects 📦 Package Includes 1 × ESP8266 NodeMCU CP2102 ESP-12E WiFi Development Board ⚠️ Note Operates at 3.3V logic levels. Install the CP2102 USB driver if the board is not detected by your computer. Use a good quality Micro USB cable for programming and power. Product appearance may vary slightly depending on the manufacturing batch.
Out of stockDC 5V WS2812B 30LED/mtr Addressable LED Strip Roll (Non Waterproof) – 1 Meter
[RGB LED Strip] RGB WS2812B Non-Waterproof 30 Pixel/1mtr Addressable Pixel Strip for Arduino – 1 Meter Strip RGB LED strip which consists of 150 SMD5050 WS2812B LEDs (with controls, IP20). SMART strips are used for creating decorative lighting, as well as in video screens and information boards. These strips can be controlled with any SMART strip controllers: autonomous (offline), slave (online), music and lights and programmable (remote control). Programs are either saved onto an SD card (offline) or are transmitted via Ethernet protocol (online). Led Edit or LedBuild applications are used for creating SMART strip programs. Features- Built-in controls Low power consumption High efficiency Smooth and even light spread IP20 rated Technical specifications Operating voltage 5 V DC Power consumption 0.3 W/LED LED quantity 150 (30 LEDs/1 m) LED type SMD5050 WS2812B (IP20) Emitting colors RGB color variations Beam angle 120° Lifespan up to 50,000 hours Length 1 m * Product Images are shown for illustrative purposes only and may differ from the actual product.
433Mhz RF Transmitter With Receiver Kit For Arduino ARM MCU Wireless
[RF Module] This is a 433Mhz RF transmitter with a receiver kit for Arduino ARM MCU wireless. It can be used as a Remote control switch, electric doors, shutter doors, windows, remote control socket, remote control LED, remote control stereo, and alarm systems. Specifications for Receiver module: Operating voltage: DC5V Quiescent Current: 4mA Receiving frequency: 433.92MHZ Receiver sensitivity: -105DB Specifications for transmitter module: Launch distance:20-200 meters (different voltage, different results) Transfer rate: 4KB / S Operating mode: AM Transmitting power: 10mW Transmitting frequency: 433M Pinout from left-right: (DATA; VCC; GND) Operating voltage :3.5-12V Applications: Remote Controls Automation System Wireless Security System Sensor Reporting Car Security System Remote Keyless Entry Package Includes: 1 x Receiver module 1 x Transmitter
Out of stockESP-12F ESP8266 Wifi Wireless IoT Board Module
[ESP Modules] The ESP-12F ESP8266 WiFi Module is a powerful and low-cost WiFi transceiver module designed for Internet of Things (IoT) applications. Built around the ESP8266 SoC, this module integrates a full TCP/IP protocol stack, enabling microcontrollers to connect directly to WiFi networks. With its integrated 32-bit RISC processor, on-chip memory, and multiple communication interfaces, the ESP-12F module can either host an application independently or act as a WiFi adapter for another microcontroller such as Arduino, Raspberry Pi, or STM32. Each module is typically shipped with AT command firmware, allowing easy communication through UART serial interface. This means developers can quickly add WiFi functionality to existing hardware without complex programming. The ESP-12F version improves performance compared to earlier modules by offering: Stronger WiFi signal output Improved anti-interference capability Optimized PCB antenna design Better impedance matching The module supports station mode, soft-AP mode, and combined AP + station mode, making it highly versatile for IoT networking. Because of its high integration, small size, and low power consumption, the ESP-12F module is widely used in: IoT devices Home automation systems Smart appliances Wireless sensor networks Industrial monitoring systems ⭐ Key Features Based on ESP8266 SoC Built-in TCP/IP protocol stack Integrated 2.4GHz WiFi Supports Station / SoftAP / Station + AP modes Pre-programmed AT command firmware Compact SMD design Strong PCB antenna Low power consumption Multiple communication interfaces 🔧 Technical Specifications Model: ESP-12F Chipset: ESP8266 WiFi Standard: IEEE 802.11 b/g/n Frequency: 2.4 GHz Operating Voltage: 3.3V Maximum Current: ~240mA Standby Power: < 1mW Interface: UART / SPI / SDIO Baud Rate: 115200 (default) Communication Format: 8N1 Security: WPA / WPA2 Package Type: 32-Pin QFN Output Power: +19.5 dBm 📡 Supported Interfaces UART SPI SDIO 1.1 / 2.0 I2S (audio interface) Multiple GPIO pins 🎯 Applications IoT projects Smart home automation Wireless sensor networks Arduino WiFi connectivity Remote monitoring systems Industrial IoT applications 📦 Package Includes 1 × ESP-12F ESP8266 WiFi Module
Water Cooling Head Water Cooling Plate 40*40mm
[Aluminium Heat Sink] Liquid coolers excel at delivering cooling to concentrated heat sources such as Peltier Elements and for delivering cooled fluid into remote or compact locations where the cooling assembly itself cannot be located. The basic operation is simple: fluid flows in one tube, it is cooled, and then it flows out the other tube. An external pump is required, and typically small DC magnetic-drive pumps are used to minimize the amount of pump power (heat) that is imparted to the fluid. Applications: Computer CPU water, industrial inverter driver, laser head cooling, industrial control cabinet cooling. Features: Heavy Aluminium build Internal flow channel extrusion forming Applicable to computer CPU water, industrial inverter driver, laser head cooling, industrial control cabinet cooling Package Includes: 1 x Water Cooling Head Water Cooling Plate 40*40mm
Out of stock5M DC 5V WS2812B 30LED/mtr Addressable LED Strip Roll (Non Waterproof) – 5 Meter
[RGB LED Strip] RGB WS2812B Non-Waterproof 30 Pixel/1mtr Addressable Pixel Strip for Arduino – 5 Meter Strip RGB LED strip which consists of 150 SMD5050 WS2812B LEDs (with controls, IP20). SMART strips are used for creating decorative lighting, as well as in video screens and information boards. These strips can be controlled with any SMART strip controllers: autonomous (offline), slave (online), music and lights and programmable (remote control). Programs are either saved onto an SD card (offline) or are transmitted via Ethernet protocol (online). LedEdit or LedBuild applications are used for creating SMART strip programs. Features- Built-in controls Low power consumption High efficiency Smooth and even light spread IP20 rated Technical specifications Operating voltage 5 V DC Power consumption 0.3 W/LED LED quantity 150 (30 LEDs/1 m) LED type SMD5050 WS2812B (IP20) Emitting colors RGB color variations Beam angle 120° Lifespan up to 50,000 hours Length 5 m * Product Images are shown for illustrative purposes only and may differ from the actual product.
Out of stockESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
[ESP Modules] It is suitable for home smart devices, industrial wireless control, wireless monitoring, and other IoT applications. This module adopts a DIP package and can be directly inserted into the backplane to realize rapid production of products, providing customers with high-reliability connection mode, which is convenient for application in various IoT hardware terminals. ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture. It has the main frequency adjustment range of 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Note: The product dimension may have2% error. The product color may have some variation due to the light effect. Features : ESP32-CAM : The smallest 802.11b/g/n Wi-Fi BT SoC module. Low power 32-bit CPU, can also serve the application processor. Up to 160MHz clock speed, summary computing power up to 600 DMIPS. Built-in 520 KB SRAM, external 4MPSRAM. Supports UART/SPI/I2C/PWM/ADC/DAC. Support OV2640 and OV7670 cameras, built-in flash lamp. Support image WiFI upload. Supports TF card. Supports multiple sleep modes. Embedded Lwip and FreeRTOS. Supports STA/AP/STA+AP operation mode. Support Smart Config/AirKiss technology. Support for serial port local and remote firmware upgrades (FOTA). Wireless Module: ESP32-S WiFi 802.11 b/g/n + Bluetooth 4.2 LE module with PCB antenna, u.FL connector, 32Mbit SPI flash, 4MBit PSRAM. External Storage: micro SD card slotup to 4GB. Camera FPC connector. Support for OV2640 (sold with a board) or OV7670 cameras. Image Format: JPEG(OV2640 support only ), BMP, grayscale. LED flashlight. Expansion: 16x through-holes with UART, SPI, I2C, PWM. Misc: Reset button. Power Supply: 5V via pin header. Power Consumption. Flash LED off: 180mA @ 5V. Flash LED on to maximum brightness: 310mA @ 5V. Deep-sleep: 6mA @ 5V min. Modem-sleep: 20mA @ 5V min. Light-sleep: 6.7mA @ 5V min. Dimensions (ESP32): 40 x 27 x 12 (LxWxH) mm. Temperature Range: Operating: -20 ~ 85 ; storage: -40 ~ 90 @ <90%RH.