All products · 9 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Corsair Vengeance LPX 16 GB (2×8) DDR4 3200
Low-profile DDR4 kit, 3200 MT/s, CL16. Black heatspreader, fits under any cooler. The default budget RAM.
G.Skill Trident Z5 RGB 32 GB (2×16) DDR5 6000
Sweet-spot AM5 kit at 6000 MT/s, CL30. Tall RGB heatspreader — check clearance with large air coolers.
Kingston Fury Beast 8 GB DDR4-3200 (single)
8 GB stick, 3200 MT/s, CL16. Pair two for dual-channel. Black low-profile heatspreader fits under any cooler.
G.Skill Trident Z5 16 GB DDR5-6000 (single, CL30)
16 GB DDR5 stick, 6000 MT/s, tight CL30 — the gold-standard speed for Ryzen 7000. RGB heatspreader, check cooler clearance.
Out of stockCorsair Vengeance LPX 8GB DDR4-3200
Single-stick 8 GB DDR4-3200 CL16. Low-profile heat spreader. Office build standard.
KLEVV FIT V 16GB 5600MHz CL30 DDR5 Gaming Desktop RAM
[Memory] KLEVV FIT V 16GB 5600MHz CL30 DDR5 High-Performance Desktop Memory Low-profile high-speed DDR5 memory built with SK Hynix premium DRAM dies. Features low latency CL30 timings, pure aluminum heat spreader, and on-die ECC error correction. ⭐ Key Features - SK Hynix Original DRAM ICs for maximum stability and overclocking headroom - Ultra-low 33mm module height fits under any large dual-tower air cooler - Intel XMP 3.0 & AMD EXPO one-click overclock profiles - On-die ECC (ODECC) for data integrity 📋 Technical Specifications - Capacity: 16GB (1x 16GB) - Speed: DDR5 5600 MHz - Latency: CL30-36-36-76 - Voltage: 1.25V - Form Factor: 288-Pin DDR5 UDIMM 📦 Package Includes - 1 x KLEVV FIT V 16GB DDR5 5600MHz RAM Module
Out of stockRFID Reader/Writer RC522 SPI S50 with RFID Card and Tag
[IR and PIR Sensors] Do you want to know the work of RFID Reader/Writer RC522 SPI S50 CARD AND KEYCHAIN, then this Product is best for you . With this Product, you can detect radio waves produced by a reader to detect the presence of (then read the data stored on) an RFID tag This is RFID Reader/Writer RC522 SPI S50 CARD AND KEYCHAIN which works on non-contact 13.56mhz communication, is designed by NXP as low power consumption, low cost, and compact size read and write chip, is the best choice in the development of smart meters and portable hand-held devices. It uses an advanced modulation system, fully integrated at 13.56MHz with all kinds of positive non-contact communication protocols. Support 14443A compatible answer signal. DSP deals with ISO14443A frames and error correction. This module can fit directly in handheld devices for mass production. The module uses the 3.3V power supply and can communicate directly with any CPU board by connecting through the SPI protocol, which ensures reliable work, good reading distance. Features : Highly integrated analog circuitry to demodulate and decode responses. Supports ISO/IEC 14443 A/MIFARE. Typical operating distance in reading/Write mode up to 50 mm. Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd. SPI up to 10 Mbit/s. FIFO buffer handles 64 bytes send and receive. Flexible interrupt modes. Power-down by software mode. Programmable Timer. 2.5 V to 3.3 V power supply. CRC coprocessor. Internal self-test. Package Includes 1 x RFID-RC522 Reader/Write Module 1 x Standard blank RFID card 2 x A Straight & right-angle header strip 1 x Special-shaped keychain RFID tag
Out of stock125kHz RFID Tag with Keychain
[Proximity Sensor] 125 KHz RFID Key Fob Proximity Token Tag This is 125K RFID Tag. The RFID technology is used for sensing and identifying tagged people and objects for access control, automation, and a whole range of different applications. Operating on a frequency of 125kHz, these tokens are all pre-programmed with unique ID numbers to communicate wirelessly with RFID Readers over distances of around 10cm or less. This means you can attach it to vehicles or items, keyrings, or even pets’ collars to keep track of the location via an array of readers in the office, warehouse, or home. Each RFID tag comes attached to a small keyring, within a little blue housing. This 125KHz RFID Tag makes them easy to distribute while maintaining a fair amount of discretion. Additionally, the process of matching tags to readers is also very simple as well, as all you have to do is tell the RFID Reader that you are adding a token, and then hold the token nearby. Then, when the token passes by the reader, the system can identify and log the ID number and time, or can even open up doors or other access ways automatically. This basic RFID tag works in the 125kHz RF range and comes with a unique 32-bit ID. It is not reprogrammable. This blank, smooth, and mildly flexible RFID tag is ready for your logo (or hand-drawn scribble). Designed for the RFID 125KHZ duplicator. can copy all the ID cards, such as Access Card, District Card, Parking, etc. Note: The color and design of the tag will be shipped randomly depending upon availability.