All products · 17 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Out of stockLiPo 3S 2200 mAh 30C (with XT60)
11.1V 2200 mAh 3S LiPo for drones, RC cars, RC planes.
802580 LiPo Battery 700mAh 3.7V High Discharge 25c for Drone
[LiPo Cell] LiPo Battery 700mAh 3.7V High Discharge 802580 3.7V Lithium Polymer Battery • 700mAh Capacity • 25C High Discharge • 802580 Cell • Molex 2.0mm 2-Pin Connector The LiPo Battery 700mAh 3.7V High Discharge 802580 is a compact and lightweight Lithium Polymer (LiPo) rechargeable battery designed for applications that require high current output in a small form factor. Built with high-quality lithium polymer cells, this battery delivers a nominal voltage of 3.7V and a 700mAh capacity, making it ideal for RC toys, drones, mini helicopters, robotics, wireless electronics, and DIY projects. With a 25C continuous discharge rating, this battery can provide rapid bursts of current for motors and other high-power devices. The battery comes with a Molex 2.0mm 2-pin connector and an integrated protection PCB, offering added safety during charging and discharging. The 802580 cell size refers to the approximate dimensions of 8.0 × 25 × 80 mm, allowing the battery to fit easily into compact electronic devices while maintaining excellent power-to-weight performance. Note: This battery is intended for high-discharge applications such as RC models and robotics. It is not recommended for long-duration low-current devices such as cameras or data loggers. ⭐ Features High-quality 3.7V 700mAh LiPo battery 25C continuous discharge capability Compact 802580 cell size Lightweight design Stable voltage output Built-in protection circuit (PCB) Pre-installed Molex 2.0mm 2-pin connector Excellent power-to-weight ratio Rechargeable and reusable Suitable for high-current applications Easy plug-and-play installation 📋 Technical Specifications Product Type: Rechargeable Lithium Polymer (LiPo) Battery Battery Chemistry: Lithium Polymer (Li-ion Polymer) Cell Size: 802580 Nominal Voltage: 3.7V Full Charge Voltage: 4.20V Typical Capacity: 700mAh Discharge Rating: 25C Continuous Dimensions: Approx. 8.0 × 25 × 80 mm Weight: Approx. 18g Connector Type: Molex 2.0mm 2-Pin Protection Circuit: Built-in PCB Protection Rechargeable: Yes 🔧 Applications Suitable for: RC Cars RC Airplanes RC Helicopters Drones & Quadcopters Robotics Projects Arduino Projects ESP32 Projects DIY Electronics Portable Devices Wireless Modules Educational Projects Electronic Prototyping Battery Replacement Projects Miniature Electronics 📦 Package Includes 1 × LiPo Battery 700mAh 3.7V High Discharge 802580 with Molex 2.0mm 2-Pin Connector ⚠️ Safety Instructions Use only LiPo-compatible chargers. Do not charge above 4.20V. Do not discharge below the recommended cut-off voltage. Do not short-circuit the battery terminals. Do not puncture, crush, or expose the battery to fire. Store partially charged in a cool, dry place when not in use. Ensure connector polarity matches your device before connection.
702035 LiPo Battery 400mAh 3.7V High Discharge 25C For Drone
[LiPo Cell] LiPo Battery 400mAh 3.7V High Discharge 702035 3.7V Lithium Polymer Battery • 400mAh Capacity • 25C High Discharge • 702035 Cell • Molex 2.0mm 2-Pin Connector The LiPo Battery 400mAh 3.7V High Discharge 702035 is a compact and lightweight Lithium Polymer (LiPo) rechargeable battery designed for applications that require high current output in a small form factor. Built with high-quality lithium polymer cells, this battery delivers a nominal voltage of 3.7V and a 400mAh capacity, making it ideal for RC toys, drones, mini helicopters, robotics, wireless electronics, and DIY projects. With a 25C continuous discharge rating, this battery can provide rapid bursts of current for motors and other high-power devices. The battery comes with a Molex 2.0mm 2-pin connector and an integrated protection PCB, offering added safety during charging and discharging. The 702035 cell size refers to the approximate dimensions of 7.0 × 20 × 35 mm, allowing the battery to fit easily into compact electronic devices while maintaining excellent power-to-weight performance. Note: This battery is intended for high-discharge applications such as RC models and robotics. It is not recommended for long-duration low-current devices such as cameras or data loggers. ⭐ Features High-quality 3.7V 400mAh LiPo battery 25C continuous discharge capability Compact 702035 cell size Lightweight design Stable voltage output Built-in protection circuit (PCB) Pre-installed Molex 2.0mm 2-pin connector Excellent power-to-weight ratio Rechargeable and reusable Suitable for high-current applications Easy plug-and-play installation 📋 Technical Specifications Product Type: Rechargeable Lithium Polymer (LiPo) Battery Battery Chemistry: Lithium Polymer (Li-ion Polymer) Cell Size: 702035 Nominal Voltage: 3.7V Full Charge Voltage: 4.20V Typical Capacity: 400mAh Discharge Rating: 25C Continuous Dimensions: Approx. 7.0 × 20 × 35 mm Weight: Approx. 12g Connector Type: Molex 2.0mm 2-Pin Protection Circuit: Built-in PCB Protection Rechargeable: Yes 🔧 Applications Suitable for: RC Cars RC Airplanes RC Helicopters Drones & Quadcopters Robotics Projects Arduino Projects ESP32 Projects DIY Electronics Portable Devices Wireless Modules Educational Projects Electronic Prototyping Battery Replacement Projects Miniature Electronics 📦 Package Includes 1 × LiPo Battery 400mAh 3.7V High Discharge 702035 with Molex 2.0mm 2-Pin Connector
Nickel Strip 0.12mm × 5mm 1P Plane Coated Nickel Welding Strip for 18650 Lithium Battery Pack – 1 Meter
[Nickel Strip] The Nickel Strip 0.12mm × 5mm 1P Plane Coated Nickel Welding Strip is specially designed for assembling and repairing 18650 lithium battery packs and other rechargeable battery modules. Made from nickel-coated steel, this strip provides a strong mechanical bond, good electrical conductivity, and excellent weldability. Its flat 1P plane design ensures stable current flow and reliable cell connections. The nickel coating protects against rust and corrosion, making it suitable for long-term use in power banks, e-bike battery packs, solar storage systems, UPS batteries, and DIY lithium battery projects. Supplied in a convenient 1 meter length, this strip is easy to cut, bend, and shape according to your battery pack layout. 🔹 Key Features Made from nickel-coated steel for strength and durability Size: 0.12mm thickness × 5mm width Flat 1P plane strip design Good electrical conductivity and strong weld joints Excellent for spot welding lithium battery cells Corrosion-resistant nickel coating Easy to cut, bend, and form Suitable for 18650, 21700, 26650 lithium cells 🔹 Technical Specifications Material: Nickel-coated steel (Coated Nickel) Thickness: 0.12 mm Width: 5 mm Type: 1P Plane Flat Strip Length: 1 Meter Color: Silver Application: Spot welding for lithium battery packs Compatible Cells: 18650, 21700, 26650 and similar cylindrical cells Conductivity: Good Corrosion Resistance: High (nickel-coated surface) 🔹 Applications 18650 lithium battery pack assembly Power bank manufacturing and repair E-bike and electric vehicle battery packs Solar battery storage systems UPS and inverter battery packs DIY lithium battery projects Battery repair and maintenance 🔹 Package Contents 1 × Coated Nickel Welding Strip (0.12mm × 5mm, Length: 1 Meter)
Nickel Strip 0.12mm × 4mm 1P Plane Coated Nickel Welding Strip for 18650 Lithium Battery Pack – 1 Meter
[Nickel Strip] The Nickel Strip 0.12mm × 4mm 1P Plane Coated Nickel Welding Strip is specially designed for assembling and repairing 18650 lithium battery packs and other rechargeable battery modules. Made from nickel-coated steel, this strip provides a strong mechanical bond, good electrical conductivity, and excellent weldability. Its flat 1P plane design ensures stable current flow and reliable cell connections. The nickel coating protects against rust and corrosion, making it suitable for long-term use in power banks, e-bike battery packs, solar storage systems, UPS batteries, and DIY lithium battery projects. Supplied in a convenient 1 meter length, this strip is easy to cut, bend, and shape according to your battery pack layout. 🔹 Key Features Made from nickel-coated steel for strength and durability Size: 0.12mm thickness × 4mm width Flat 1P plane strip design Good electrical conductivity and strong weld joints Excellent for spot welding lithium battery cells Corrosion-resistant nickel coating Easy to cut, bend, and form Suitable for 18650, 21700, 26650 lithium cells 🔹 Technical Specifications Material: Nickel-coated steel (Coated Nickel) Thickness: 0.12 mm Width: 4 mm Type: 1P Plane Flat Strip Length: 1 Meter Color: Silver Application: Spot welding for lithium battery packs Compatible Cells: 18650, 21700, 26650 and similar cylindrical cells Conductivity: Good Corrosion Resistance: High (nickel-coated surface) 🔹 Applications 18650 lithium battery pack assembly Power bank manufacturing and repair E-bike and electric vehicle battery packs Solar battery storage systems UPS and inverter battery packs DIY lithium battery projects Battery repair and maintenance 🔹 Package Contents 1 × Coated Nickel Welding Strip (0.12mm × 4mm, Length: 1 Meter)
Nickel Strip 0.15mm × 6mm 1P Pure Nickel Welding Strip for 18650 Lithium Battery Pack – 1 Meter
[Nickel Strip] The Nickel Strip 0.15mm × 6mm 1P Pure Nickel Welding Strip is specially manufactured for building and repairing 18650 lithium battery packs and other rechargeable battery assemblies. Made from high-purity nickel, this strip offers low electrical resistance, excellent conductivity, and strong spot-welding performance. Its flat 1P plane design ensures uniform current flow and reliable connections between battery cells. The strip is corrosion-resistant and durable, making it ideal for long-term use in power banks, e-bike battery packs, solar storage systems, UPS batteries, and DIY lithium battery projects. Supplied in a convenient 1 meter length, this strip is easy to cut and shape according to your battery pack design. 🔹 Key Features Made from pure nickel (not nickel-plated steel) Size: 0.15mm thickness × 6mm width Flat 1P plane strip for uniform current flow Excellent conductivity with low internal resistance Strong and reliable for spot welding Corrosion-resistant and long-lasting Easy to cut, bend, and shape Perfect for 18650, 21700, 26650 lithium battery packs 🔹 Technical Specifications Material: Pure Nickel Thickness: 0.15 mm Width: 6 mm Type: 1P Plane Flat Strip Length: 1 Meter Color: Silver Application: Spot welding for lithium battery packs Compatible Cells: 18650, 21700, 26650 and similar cylindrical cells Resistance: Very low (high conductivity) Corrosion Resistance: Excellent 🔹 Applications 18650 lithium battery pack assembly Power bank manufacturing and repair E-bike and electric vehicle battery packs Solar battery storage systems UPS and inverter battery packs DIY lithium battery projects Battery repair and maintenance 🔹 Package Contents 1 × Pure Nickel Welding Strip (0.15mm × 6mm, Length: 1 Meter)
XT30 Connector Male-Female Pair – High-Current Plug for RC Drones, LiPo Batteries & DIY Electronics
[Power Connector] The XT30 Connector Male-Female Pair is a compact, high-quality power connector designed for reliable high-current applications. Made from durable nylon material with gold-plated terminals, the XT30 provides a secure, low-resistance connection ideal for RC drones, Li-Po batteries, ESCs, quadcopters, FPV systems, robotics projects, and DIY electronics. Its tight-fit design prevents loosening during vibration and high-speed operations, making it a popular choice for RC hobbyists and electronics builders. The connector is easy to solder, heat-resistant, and capable of handling continuous high currents without overheating. Lightweight and compact, the XT30 is perfect for small to medium power setups requiring stable, efficient power delivery. ✅ Features High-current XT30 connector pair (Male + Female) for secure power transfer Gold-plated contacts provide low resistance and excellent conductivity Heat-resistant nylon shell ensures durability under high load Compact and lightweight design ideal for drones and portable devices Provides strong anti-loosening grip for vibration-heavy applications Easy to solder for DIY battery packs and electronics projects Suitable for LiPo batteries, ESCs, FPV equipment, robotics, RC models Handles high continuous current safely without overheating 📘 Specifications Connector Type: XT30 (Male + Female Pair) Material: High-temperature nylon Contacts: Gold-plated, low-resistance Current Rating: 15A–30A (continuous depending on setup) Voltage Compatibility: Suitable for LiPo battery packs (2S–6S) Wire Compatibility: 16–18 AWG recommended Applications: Drones, RC planes, FPV systems, robotics, battery packs, DIY electronics Durability: High mechanical strength and vibration resistance 📦 Package Includes 1 × XT30 Male Connector 1 × XT30 Female Connector
TowerPro Metal Gear MG90S Mini Digital Servo Motor (180° Rotation)
[Servo Motor] ⚙️ TowerPro MG90S Mini Digital Metal Gear Servo Motor (180°) Metal Gear • Digital Servo • 180° Rotation • High Precision • Ideal for RC & Robotics The TowerPro MG90S Mini Digital Servo Motor is a compact, high-performance 9g metal gear servo designed for precise position control in robotics, RC models, automation, and DIY electronics projects. Equipped with all-metal gears, a digital control circuit, and high positioning accuracy, the MG90S offers greater durability, faster response, and higher torque than standard plastic gear servos. Operating from 4.8V to 6.0V DC, the servo delivers a stall torque of up to 2.2 kg·cm and a rotation angle of approximately 180°, making it ideal for robotic arms, pan-tilt camera systems, RC airplanes, RC cars, boats, educational kits, and embedded control applications. The standard 3-wire JR/Futaba-compatible connector allows direct interfacing with Arduino, ESP32, Raspberry Pi, STM32, and most RC receivers. Its lightweight design, compact dimensions, and excellent holding torque make the MG90S one of the most popular micro servos for hobbyists, students, and professionals alike. ⭐ Features Genuine TowerPro MG90S digital servo Durable all-metal gear transmission Approximate 180° rotation angle High positioning accuracy Fast control response High holding torque Smooth and quiet operation Lightweight and compact design Standard 3-wire servo interface Compatible with Arduino, ESP32, Raspberry Pi and RC receivers Ideal for robotics, RC models and automation projects 📋 Technical Specifications Product Type: Mini Digital Servo Motor Brand: TowerPro Model: MG90S Gear Type: Metal Gear Rotation Angle: Approximately 180° Operating Voltage: 4.8V–6.0V DC Stall Torque: 1.8 kg·cm @ 4.8V 2.2 kg·cm @ 6.0V Operating Speed: 0.10 sec/60° @ 4.8V 0.08 sec/60° @ 6.0V Control Signal: PWM (50Hz Standard Servo Signal) Dead Band Width: 1µs Connector Type: JR / Futaba Compatible Cable Length: Approximately 25cm Dimensions: 22.8 × 12.2 × 28.5 mm Weight: Approximately 13.4g Operating Temperature: 0°C to +55°C These specifications are consistent with the manufacturer's published specifications. 🔧 Applications Suitable for: Arduino Projects ESP32 Projects Raspberry Pi Projects Robotic Arms Humanoid Robots RC Airplanes RC Cars RC Boats Pan-Tilt Camera Systems Automatic Door Mechanisms DIY Electronics Educational Robotics Smart Automation Projects Mechatronics Projects 📦 Package Includes 1 × TowerPro MG90S Mini Digital Servo Motor 1 × Servo Horn Set Single Arm Horn Double Arm Horn Four Arm Horn 1 × Mounting Screw Set ⚠️ Note Operate the servo only within the recommended 4.8V–6.0V DC supply range. For stable operation, use an external regulated power supply when driving the servo from microcontrollers. Product appearance, cable color, or accessories may vary slightly depending on the manufacturing batch. Counterfeit MG90S servos are common in the market. Purchase from trusted suppliers for genuine performance.
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
[Drone Motor] The A2212 10T 1400KV Brushless Motor for Drone is best compatible or used with SimonK 30A ESC and 1045 Propeller Set. This 1400KV brushless motor is equipped with a solid metal case which makes it reliable and durable. The A2212 10T Motor comes with a pre-soldered good-quality connector for a fast and direct connection between ESC and the motor. Application : Drones Quadcopters Multirotors RC Airplanes UAV Motor KV (RPM/V) 1400 Motor Type Brushless Motor Compatible LiPO Batteries: 2S to 3S Model No.: A2212 10T Shaft Diameter (mm): 3.17 Current Capacity (A) 16 Max. Efficiency Current (A) 6 ~ 12 No-Load Current (mA) 700 Maximum Efficiency 0.8 Length (mm): 27.5 Weight (g): 72 Width (mm): 27 Shipping Weight 0.078 kg Shipping Dimensions 12 × 6 × 5 cm Features : The steel design is capable of withstanding competitional conditions. Lightweight design makes them suitable for a wide range of Quadcopter and Hexacopter Frames. Compact size. Offers great performance and value for money. Smooth throttle response for best RC experience. Package Includes : 1 x A2212 10T 1400Kv Brushless Motor for Drone 1 x Prop Adapter A Motor Holder (X-type) and set of screws
Nickel Strip 0.15mm X 5mm 1P Plane Coated Nickel Welding Strip For 18650 Lithium Battery Pack 1 Meter
[Nickel Strip] Nickel Plated Strip is best suitable for spot welding in the 18650 Lithium-Ion battery pack. Nickle Strip is generally useful in the welding of battery points together to connect the batteries in combinations. These Nickel Plated strips are popular because of their good performance while soldering as it gets soldered very quickly; easily with normal soldering metal with High tensile tension and Low resistivity. They are mainly useful in the manufacture of nickel-hydrogen batteries, lithium batteries; high magnification power tools batteries, laptop batteries, battery combination with HM. Features: High resistance to corrosion High Tensile Tension. Low Resistivity. Useful for battery points welding. Package Includes: 1 x 1 Meter- Nickle Plated Strip 5mm x 0.12mm
Nickel Strip 0.15mm thick 2P Plane Coated Nickel Welding Strip For 32650 Lithium Battery Pack (Size – 50mm)
[Nickel Strip] H-Type Battery Connection Welding Strip for 32650 lithium battery Nickel strips are used in the welding of battery points together to connect the batteries in combinations. These Nickel strips are popular because of their good performance while soldering as it gets soldered very quickly and easily with normal soldering metal with High tensile tension and Low resistivity. They are mainly used in the manufacture of nickel-hydrogen batteries, lithium batteries, high magnification power tools batteries, laptop batteries, battery combinations with HM. The 50mm x 0.12 – 0.15mm Nickel Plated Strip is a high-quality conductive material designed for connecting batteries in parallel configurations. With its optimal width and thickness, it ensures efficient current flow and low resistance for stable performance. The strip is corrosion-resistant, offering durability and reliability in various applications. Perfect for DIY battery packs, it supports secure spot welding with excellent conductivity. Suitable for 32650/32700, and similar battery types, it accommodates two parallel connections seamlessly. Ideal for professionals and hobbyists, this nickel strip provides robust and long-lasting battery interconnections. Features: High Conductivity 0.12-0.15mm thickness 50mm width High-purity nickel Compatible with spot welding High Current Handling Lightweight Design Package Includes: 1 x 22mm x 0.12-0.15mm Nickel Plated Strip For 2 Parallel Battery Connections – 1 Meter
Nickel Strip 0.15mm X 10mm 1P Plane Coated Nickel Welding Strip For 32650/32700 Lithium Battery Pack
[Nickel Strip] Description Battery Connection Welding Strip for 32650/32700 Lithium Battery The 10mm x 0.12-0.15mm Nickel Plated Strip is a durable and high-quality material designed for efficient battery connections. Its pure nickel composition ensures excellent conductivity and corrosion resistance, making it ideal for spot welding applications. The strip's thin profile offers flexibility while maintaining strength, suitable for creating secure connections in battery packs. Measuring 10mm in width and 0.12mm in thickness, it is perfect for DIY projects and professional battery assembly. This strip supports high-current flow without overheating, ensuring reliability in power applications. Compatible with various battery types, it provides a clean and efficient solution for long-lasting connections. Features: High Conductivity Corrosion Resistance Durable and Flexible Spot Welding Compatibility High Current Carrying Capacity 10mm width 0.12 -0.15 mm Thickness Package Includes: 1 x 10mm x 0.12-0.15mm Nickel Plated Strip For Battery Connections – 1 Meter
Nickel Strip 0.15mm X 6mm 1P Plane Coated Nickel Welding Strip For 18650 Lithium Battery Pack 1 Meter
[Nickel Strip] Description Battery Connection Welding Strip for 18650 Lithium Battery 1M Nickel strips are used in the welding of battery points together to connect the batteries in combinations. These Nickel strips are popular because of their good performance while soldering as it gets soldered very quickly and easily with normal soldering metal with High tensile tension and Low resistivity. They are mainly used in the manufacture of nickel-hydrogen batteries, lithium batteries, high magnification power tools batteries, laptop batteries, battery combinations with HM.
Mini MP1584 DC-DC 3A Adjustable Buck Module
[Step Down Buck Converter] The Mini MP1584 DC-DC 3A Adjustable Buck module is ultra small adjustable 0.8V to 20V output DC to DC step-down Buck converter that uses an MP1584EN high frequency switching regulator and integrated high voltage power MOSFET. It features a soft start, thermal shutdown, and under-voltage lockout (UVLO) to protect the module from operating at insufficient supply voltage. Small size, lightweight, low internal power consumption, and wide input voltage range of 4.5V to 28V make this module suitable for a variety of different applications where small size and lightweight voltage conversion is needed, including RC cars and airplanes, quadcopters, robotics, Arduino modules, and DIY devices. Applications: DIY 8051 / AVR / ARM / PIC / Arduino / Raspberry-Pi projects Robotics Breadboard power supply Manual speed adjustment of small DC motors Power Supply for RC project planes, cars, helicopters Universal Battery Elimination Circuit (UBEC) for 2S-6S lipo battery pack Receiver/servo power supply Communications equipment power supply Mobile equipment power supplies Note: PCB board color may be different from the actual product. Features: Wide 4.5V to 28V Operating Input Range High-Efficiency Pulse Skipping Mode for Light Load Ceramic Capacitor Stable Internal Soft-Start Internally Set Current Limit without a Current Sensing Resistor
BMP180 Digital Barometric Sensor Module compatible with Arduino
[Barometric Sensor] BMP180 Digital Barometric Sensor Module compatible with Arduino will Measure the absolute pressure of the environment using a digital barometer such as this has some interesting applications. By converting the pressure measured into altitude, you have a reliable sensor for determining the height of your robot, plane or projectile! Using a sensor as capable as the BMP180 you can achieve an accuracy of 1m, with the noise of only 17cm in ultra-high resolution noise. The device will operate at the only 0.3uA meaning low current draw for battery-powered applications. The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we’ve added optional I2C pull-ups that can be enabled using the PU (pull up) jumper on the board for your convenience and ease during breadboarding. Using I2C, the device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation. Features : 1.8V to 3.6V Supply Voltage Low power consumption – 0.5uA at 1Hz I2C interface Max I2C Speed: 3.5Mhz Very low noise – up to 0.02hPa (17cm) Fully calibrated Pressure Range: 300hPa to 1100hPa (+9000m to -500m) Package Includes : 1 x BMP180 Digital Barometric Pressure Sensor Board Module 1 x 1x4Burg Connector(Straight)
Out of stockESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
[ESP Modules] It is suitable for home smart devices, industrial wireless control, wireless monitoring, and other IoT applications. This module adopts a DIP package and can be directly inserted into the backplane to realize rapid production of products, providing customers with high-reliability connection mode, which is convenient for application in various IoT hardware terminals. ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture. It has the main frequency adjustment range of 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Note: The product dimension may have2% error. The product color may have some variation due to the light effect. Features : ESP32-CAM : The smallest 802.11b/g/n Wi-Fi BT SoC module. Low power 32-bit CPU, can also serve the application processor. Up to 160MHz clock speed, summary computing power up to 600 DMIPS. Built-in 520 KB SRAM, external 4MPSRAM. Supports UART/SPI/I2C/PWM/ADC/DAC. Support OV2640 and OV7670 cameras, built-in flash lamp. Support image WiFI upload. Supports TF card. Supports multiple sleep modes. Embedded Lwip and FreeRTOS. Supports STA/AP/STA+AP operation mode. Support Smart Config/AirKiss technology. Support for serial port local and remote firmware upgrades (FOTA). Wireless Module: ESP32-S WiFi 802.11 b/g/n + Bluetooth 4.2 LE module with PCB antenna, u.FL connector, 32Mbit SPI flash, 4MBit PSRAM. External Storage: micro SD card slotup to 4GB. Camera FPC connector. Support for OV2640 (sold with a board) or OV7670 cameras. Image Format: JPEG(OV2640 support only ), BMP, grayscale. LED flashlight. Expansion: 16x through-holes with UART, SPI, I2C, PWM. Misc: Reset button. Power Supply: 5V via pin header. Power Consumption. Flash LED off: 180mA @ 5V. Flash LED on to maximum brightness: 310mA @ 5V. Deep-sleep: 6mA @ 5V min. Modem-sleep: 20mA @ 5V min. Light-sleep: 6.7mA @ 5V min. Dimensions (ESP32): 40 x 27 x 12 (LxWxH) mm. Temperature Range: Operating: -20 ~ 85 ; storage: -40 ~ 90 @ <90%RH.
SG90 9g Micro Servo Motor 180° Plastic Gear Servo for Arduino, Robotics & RC Projects
[Servo Motor] The SG90 9g Micro Servo Motor is a lightweight and compact servo designed for Arduino, robotics, RC models, automation systems, and DIY electronics projects. It provides precise position control with approximately 180° rotation and low power consumption. 🔹 Product Description The SG90 9g Micro Servo Motor is one of the most popular servo motors used in electronics, robotics, and educational projects. Featuring a lightweight design and durable plastic gears, it offers accurate position control and reliable operation for a wide range of applications. In addition, the SG90 uses standard PWM control signals, making it compatible with Arduino, ESP32, Raspberry Pi, STM32, and other microcontroller platforms. As a result, it is widely used in robotic arms, obstacle-avoiding robots, RC aircraft, pan-tilt camera systems, and automation projects. Because of its compact size and lightweight construction, the servo can be easily integrated into small projects where space and weight are important factors. Furthermore, it delivers smooth motion and precise angular positioning across its operating range. The SG90 supports approximately 0° to 180° rotation and includes servo horns and mounting accessories for quick installation. Moreover, its low power consumption makes it suitable for battery-powered applications. 🔹 Key Features Lightweight 9g micro servo motor Approximately 180° rotation range Durable plastic gear mechanism Standard PWM control interface Fast response and precise positioning Low power consumption Compact and lightweight design Compatible with Arduino, ESP32, Raspberry Pi, and STM32 Easy installation with included accessories Ideal for robotics and RC applications 🔹 Technical Specifications Model: SG90 Motor Type: Micro Servo Motor Operating Voltage: 4.8V – 6V DC Typical Operating Voltage: 5V DC Stall Torque: 2.5 kg·cm Operating Speed: 0.1 sec / 60° Rotation Angle: 0° – 180° Gear Type: Plastic Gear Control Signal: PWM Connector Type: Standard 3-Pin Servo Connector Cable Length: 15cm Weight: 9g Body Material: Plastic 🔹 Applications This servo motor is suitable for: Arduino projects ESP32 projects Robotics applications Robotic arms RC airplanes RC cars and boats Pan-tilt camera systems Automation projects Educational electronics projects 🔹 Package Includes 1 × SG90 9g Micro Servo Motor Servo Horn Set Mounting Screws