All products · 51 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Snap Circuit Kit
Circuit modules with snap connectors. Power: 2×AA / 3×AA / 9V (kit dependent). Components: switches, LEDs, buzzer, motor, resistors, capacitors. No soldering. Safe low-voltage learning.
Only 1 leftIOT Smarthome Kit
MCU: ESP8266/ESP32. Modules: 1–4 channel relay (optocoupled preferred), PIR, LDR, DHT. Control: app/web dashboard. Protocols: MQTT/HTTP. Power: 5V input. Properly isolated AC relay use.
Breadboard Kit
Breadboard: 400/830 tie-points. Jumpers: M-M, M-F. Common parts: resistors (¼W), LEDs, push buttons, potentiometer. Modules: LDR, buzzer, IR, PIR, relay. Power module: 3.3V/5V rails (optional).
ADXL345 Accelerometer
ADXL345 3-axis accelerometer. Interface: I2C/SPI. Supply: 2.0–3.6V (modules often 3.3–5V). Ranges: ±2/±4/±8/±16g.
Out of stockSony DualSense Edge Wireless Controller (PS5)
Customisable PS5 controller, swappable stick modules, paddle remap, function keys.
KLEVV Bolt X 16GB (2 x 8GB) 3200MHz CL16 DDR4 Desktop RAM Kit
[Memory] KLEVV Bolt X 16GB (2x8GB) DDR4 3200MHz CL16 Gaming RAM Kit High quality dual-channel DDR4 memory kit featuring pure 99.5% aluminum heatsinks with geometric laser-embossed patterns. Built for Intel Core 10th-14th gen and AMD Ryzen AM4 platforms. ⭐ Key Features - 16GB Dual Channel Kit (2 x 8GB) - 3200MHz XMP 2.0 with fast CL16-18-18 timings - Low-profile 36.7mm height prevents heatsink obstruction - Tested 100% on ASUS, MSI, Gigabyte, and ASRock motherboards 📋 Technical Specifications - Capacity: 16GB (2x 8GB) - Speed: DDR4 3200 MHz - Timings: CL16-18-18-38 - Voltage: 1.35V 📦 Package Includes - 2 x KLEVV Bolt X 8GB DDR4 RAM Modules
Almirah Wardrobe Switch – 250V AC 6A Momentary Push-to-Off Switch
[Mechanical Switches] Almirah Wardrobe Switch – 250V AC 6A Momentary Push-to-Off Switch The Almirah Switch is a compact single-pole momentary push-to-off switch designed for use in almirahs, cupboards, wardrobes, cabinets, and furniture lighting applications. It provides instantaneous switching action and is suitable for applications where an electrical circuit needs to be switched according to the opening or closing of a cabinet or door. The switch features a high-grade polycarbonate body and brass contacts, providing reliable electrical conduction and durability for regular use. Its compact design is intended to fit standard almirah cutouts and supports panel or surface mounting with screw-type wire terminals. With a rating of 250V AC and 6A, an IP20 protection level, and a mechanical life of more than 10,000 operations, this switch is suitable for indoor furniture and cabinet applications. ⭐ Key Features 250V AC rated voltage 6A current rating Single-pole design Momentary push-button operation Push-to-Off action Instantaneous response High-grade polycarbonate construction Brass electrical contacts Compact design for standard almirah cutouts Panel or surface mounting Screw-type wire terminals Glossy white finish Mechanical life of >10,000 operations IP20 protection RoHS compliant 📋 Technical Specifications Product Type: Almirah Switch Switch Type: Momentary Actuator Type: Push Button Circuit Type: Single Circuit Number of Poles: Single Pole Rated Voltage: 250V AC Maximum Voltage: 250V AC Current Rating: 6A Maximum Current: 6A Response Time: Instantaneous Automation Grade: Manual Material: High-Grade Polycarbonate Contact Material: Brass Wire Terminal: Screw-Type Mounting Type: Panel / Surface Mount Protection Level: IP20 Finish Type: Glossy Color: White Operating Temperature: -10°C to +50°C Temperature Range: -10°C to +50°C Mechanical Life: >10,000 Operations Insulation Resistance: 100MΩ Minimum @ 500V DC Contact Resistance: 50mΩ Stroke: Standard Push-to-Off Action Size: Compact; fits standard almirah cutout Weight: Approximately 20g Number of Modules: Single Module UV Stabilized: Normal RoHS Compliance: Yes 🔌 Operation The switch provides a push-to-off momentary action. It is designed for applications where the switch operates automatically through the physical movement of a cupboard, wardrobe, almirah, or cabinet door. 🔧 Applications Almirah Lighting Cupboard Lighting Wardrobe Lighting Cabinet Lighting Furniture Lighting Storage Cabinet Applications Office Cabinets Home Furniture Control Panels Indoor Electrical Applications 🛠️ Installation The switch can be installed using its panel or surface mounting arrangement. Fit the switch into a suitable cutout and secure it firmly. Connect the wires to the screw-type terminals with the power supply switched off during installation. 📦 Package Includes 1 × Almirah Switch – White, 250V AC 6A ⚠️ Precautions Disconnect the power supply before installation or wiring. Do not exceed the 250V AC / 6A rating. Ensure screw terminals are tightened securely. Use suitable wiring for the connected load. Intended primarily for indoor applications. IP20 protection does not provide waterproof protection. Do not use in wet or exposed outdoor environments. Replace the switch if contacts become damaged or operation becomes unreliable. ❓ Frequently Asked Questions Q: What is the voltage and current rating?A: The switch is rated for 250V AC and 6A. Q: What type of switch is it?A: It is a single-pole momentary push-to-off switch. Q: Where can it be installed?A: It is designed for almirahs, cupboards, wardrobes, cabinets, and similar furniture applications. Q: What material is used for the switch?A: The body is made from high-grade polycarbonate, with brass contacts. Q: What is the mechanical life?A: The supplied specification states a mechanical life of more than 10,000 operations.
45mm 1.75-Inch 4Ohms 3W Internal Magnet Speaker with Frame
[Speakers] 45mm Internal Magnet Speaker with Frame – 4Ω 3W 45×23×23mm The 45mm Internal Magnet Speaker with Frame (1.75-Inch) is a compact and efficient audio driver designed for DIY electronics, portable audio devices, multimedia systems, toys, alarms, intercoms, and embedded audio applications. Featuring an internal magnet structure and durable mounting frame, this speaker provides clear and stable sound output while maintaining a compact form factor. With a compact size of 45×23×23mm, 4Ω impedance, and 3W power rating, this speaker is suitable for small amplifier projects and electronic devices where space is limited. Its built-in frame allows convenient installation in custom enclosures, panels, and electronic products. ⭐ Key Features 45mm (1.75-Inch) speaker size 4Ω impedance 3W power rating Internal magnet design Durable mounting frame Compact 45×23×23mm construction Clear and stable sound output Lightweight and space-saving Suitable for low-power audio applications Easy to install in custom enclosures Ideal for DIY, repair and OEM applications 📋 Technical Specifications Product Type: Internal Magnet Speaker Speaker Size: 45mm (1.75 Inch) Dimensions: 45 × 23 × 23mm Impedance: 4Ω Power Rating: 3W Magnet Type: Internal Magnet Frame Type: With Mounting Frame Speaker Type: Dynamic Full Range Speaker Audio Type: Mini Full Range Speaker Mounting: Frame / Panel Mount Application: Compact Audio & Embedded Electronics 🔧 Applications DIY Speaker Projects Portable Audio Devices Bluetooth Speaker Projects Multimedia Speaker Systems Alarm Systems Toys and Sound Modules Intercom Systems Embedded Electronics Educational Electronics Kits Replacement Speaker Repairs Smart Gadgets OEM Product Manufacturing Mini Amplifier Projects 🛠️ Installation Mount the speaker securely inside the required enclosure or panel using its mounting frame. Connect it to a compatible amplifier with an output suitable for 4Ω speakers and a power rating appropriate for the 3W speaker. Proper mounting helps reduce unwanted vibration and improves overall sound performance. 📦 Package Includes 1 × 45mm Internal Magnet Speaker with Frame – 4Ω 3W ⚠️ Precautions Match the 4Ω impedance with the amplifier output. Do not exceed the 3W rated power. Do not apply direct DC voltage to the speaker. Ensure correct wiring polarity during installation. Avoid exposure to moisture and excessive dust. Mount securely to prevent vibration and unwanted noise. Do not apply physical pressure to the speaker cone or diaphragm. Use a compatible audio amplifier module for proper operation.
2 Inch 4 Ohms 5Watt Internal Magnet Speaker with Frame
[Speakers] 2-Inch Internal Magnet Speaker with Frame – 53×29×23mm 4Ω 5W The 2-Inch Internal Magnet Speaker with Frame is a compact and efficient audio driver designed for DIY electronics, portable audio devices, alarms, toys, embedded systems, and other space-constrained applications. Featuring an internal magnet design and durable frame construction, this speaker provides clear and balanced sound output while maintaining a compact footprint. With dimensions of 53×29×23mm, 4Ω impedance, and a 5W power rating, this speaker is suitable for small amplifier projects and electronic devices requiring a compact audio solution. The mounting frame makes installation convenient in custom enclosures and equipment. ⭐ Key Features 2-Inch compact speaker design Internal magnet structure 4Ω impedance 5W power rating Durable metal frame construction Clear and balanced sound output Compact and space-saving design Easy mounting with frame and screw slots Suitable for low and medium-power audio applications Ideal for DIY and OEM applications 📋 Technical Specifications Product Type: Dynamic Internal Magnet Speaker Speaker Size: 2 Inch Dimensions: 53 × 29 × 23mm Impedance: 4Ω Power Rating: 5W Magnet Type: Internal Magnet Magnet Material: Ferrite Shape: Rectangular Frame Type: Metal Frame Cone Material: Paper / Mylar Diaphragm depending on variant Speaker Type: Full Range / Dynamic Speaker Mounting: Frame with Screw Slots Application: Compact Audio & Embedded Electronics 🔧 Applications DIY Speaker Projects Portable Audio Devices Bluetooth Speaker Projects Alarm Systems Toys and Sound Modules Intercom Systems Embedded Electronics Educational Electronics Kits Replacement Speaker Repairs Smart Gadgets OEM Product Manufacturing Mini Amplifier Projects 🛠️ Installation Connect the speaker to a compatible amplifier output matching the speaker's 4Ω impedance and 5W power rating. Secure the speaker firmly using the mounting frame to reduce unwanted vibration and noise during operation. 📦 Package Includes 1 × 2-Inch Internal Magnet Speaker with Frame – 4Ω 5W ⚠️ Precautions Match the 4Ω impedance with the amplifier output. Do not exceed the 5W rated power. Avoid applying direct DC voltage to the speaker. Avoid exposure to moisture and excessive humidity. Mount the speaker securely before operation. Do not apply physical pressure to the speaker cone or diaphragm. Avoid short circuits at the speaker terminals. Keep the speaker away from excessive heat and magnetic interference.
2.25-Inch 8ohms 8W Full Range Speaker for Compact Audio Applications
[Speakers] 2.25-Inch 8Ω 8W Full Range Speaker for Compact Audio Applications The 2.25-Inch 8Ω 8W Full Range Speaker is a compact and efficient audio driver designed for small electronic and embedded sound applications. Featuring an 8Ω impedance and 8W power rating, this speaker delivers clear and balanced sound output while maintaining low power consumption and excellent efficiency. Its compact size makes it ideal for projects where installation space is limited, including portable speakers, DIY electronics, toys, alarm systems, intercom devices, and mini speaker enclosures. The full-range design allows it to reproduce a broad range of audio frequencies, making it suitable for both voice and music playback applications. Built with durable materials and designed for reliable long-term performance, this speaker is an excellent choice for electronics hobbyists, engineers, and product developers working on custom audio projects. ⭐ Key Features 2.25-Inch compact speaker driver 8Ω impedance 8W power rating Full-range audio reproduction Clear and balanced sound output Lightweight and compact design Easy to mount in enclosures and panels Suitable for low to medium-power audio applications Durable construction for long-term use Ideal for DIY and embedded audio systems 📋 Technical Specifications Product Type: Full Range Speaker Speaker Size: 2.25 Inch Impedance: 8Ω Power Rating: 8W Speaker Type: Full Range Mounting Type: Enclosure / Panel Mount Application Type: Audio Output 🔧 Applications Portable Speaker Systems DIY Audio Projects Bluetooth Speaker Modules Toys and Educational Kits Alarm and Notification Systems Embedded Electronic Devices Mini Amplifiers and Sound Modules Intercom Systems Robotics Projects Custom Speaker Enclosures ⚠️ Precautions Do not exceed the 8W rated power. Use an amplifier compatible with an 8Ω speaker load. Avoid exposure to moisture and excessive dust. Mount securely to minimize vibration and distortion. Do not apply direct pressure on the speaker cone. 📦 Package Includes 1 × 2.25-Inch 8Ω 8W Full Range Speaker
57mm (2.25-Inch) Internal Magnet Speaker 4Ohms 3W Full Range Audio Speaker
[Speakers] 57mm (2.25-Inch) Internal Magnet Speaker – 4Ω 3W Full Range Audio Speaker The 57mm (2.25-Inch) Internal Magnet Speaker is a compact and reliable full-range audio speaker designed for DIY electronics, multimedia devices, embedded sound systems, and portable audio applications. Featuring a 4Ω impedance and 3W power rating, this speaker delivers clear and balanced sound output while maintaining a slim and lightweight design. Its internal magnet structure provides a compact profile, making it ideal for applications where installation space is limited. The durable mounting frame allows easy integration into speaker enclosures, control panels, intercom systems, audio modules, and custom electronic projects. Designed for consistent audio performance, this speaker is suitable for voice playback, music, alerts, and general audio output in both portable and embedded electronic devices. ⭐ Key Features 57mm (2.25-Inch) compact speaker 4Ω impedance 3W power rating Internal magnet design Full-range audio reproduction Built-in mounting frame Clear and balanced sound output Compact and lightweight construction Easy installation in custom enclosures Suitable for portable and embedded audio applications Ideal for DIY electronics and speaker projects 📋 Technical Specifications Product Type: Internal Magnet Speaker Speaker Size: 57mm (2.25 Inch) Impedance: 4Ω Power Rating: 3W Speaker Type: Full Range Magnet Type: Internal Magnet Frame Type: With Mounting Frame Mounting: Frame / Panel Mount Application: Embedded Audio Systems 🔧 Applications DIY Electronics Projects Audio Modules & Music Players Intercom and Communication Systems Toys and Educational Devices Portable Audio Systems Alarm and Notification Devices Embedded Audio Applications Mini Speaker Enclosures Multimedia Devices Robotics and Automation Projects ⚠️ Precautions Do not exceed the 3W rated power. Use an amplifier compatible with a 4Ω speaker load. Ensure proper wiring polarity during installation. Avoid exposure to moisture and dust. Mount securely to reduce vibration noise. Do not apply direct pressure on the speaker cone. 📦 Package Includes 1 × 57mm (2.25-Inch) 4Ω 3W Internal Magnet Full Range Speaker
45mm (1.75-Inch) Internal Magnet Speaker 2 Ohms 10W Full Range Audio Speaker
[Speakers] 45mm (1.75-Inch) Internal Magnet Speaker – 2Ω 10W Full Range Audio Speaker The 45mm (1.75-Inch) Internal Magnet Speaker is a compact and powerful audio driver designed for DIY electronics, portable speakers, multimedia devices, toys, embedded audio systems, and custom speaker enclosures. Featuring a 2Ω impedance and 10W power rating, this speaker provides strong audio output when paired with a compatible amplifier. Its internal magnet design provides a compact profile while maintaining efficient magnetic performance. The built-in mounting frame makes installation easy in custom enclosures and electronic devices. With its 2Ω low-impedance configuration, this speaker is suitable for compatible Class-D amplifier modules where higher output power is required from a compact speaker driver. ⭐ Key Features 45mm (1.75-Inch) compact speaker 2Ω impedance 10W power rating Internal magnet design Full-range audio reproduction Compact and lightweight construction Built-in mounting frame Clear and powerful sound output Easy to install in custom enclosures Suitable for portable and embedded audio applications Ideal for DIY speaker projects 📋 Technical Specifications Product Type: Internal Magnet Speaker Speaker Size: 45mm (1.75 Inch) Impedance: 2Ω Power Rating: 10W Speaker Type: Full Range Magnet Type: Internal Magnet Frame Type: Mounting Frame Mounting: Frame / Panel Mount Application: Embedded & Portable Audio 🔧 Applications DIY Bluetooth Speaker Projects Portable Speaker Systems Mini Audio Amplifiers Multimedia Devices Toys and Educational Kits Intercom Systems Alarm and Notification Systems Embedded Audio Devices Custom Speaker Enclosures Robotics Projects Electronic Projects ⚠️ Precautions Use an amplifier that supports a 2Ω load. Do not exceed the 10W rated power. Check amplifier output impedance before connecting. Observe correct speaker polarity during installation. Avoid excessive mechanical pressure on the speaker cone. Keep away from moisture and excessive dust. Mount securely to minimize unwanted vibration and distortion. 📦 Package Includes 1 × 45mm (1.75-Inch) 2Ω 10W Internal Magnet Full Range Speaker
2.25 Inch 4 Ohm 10 Watt Full Range Speaker with Neodymium Magnet
[Speakers] 2.25-Inch Speaker Driver • 4 Ohm Impedance • 10W Power Rating • Neodymium Magnet • Compact Full Range Audio Speaker The 2.25 Inch 4 Ohm 10 Watt Full Range Speaker with Neodymium Magnet is a compact and high-performance speaker driver designed for portable audio systems, DIY speaker projects, multimedia devices, embedded electronics, and custom sound enclosures. Featuring a powerful neodymium magnet, this speaker delivers clear vocals, balanced midrange, and improved bass response while maintaining a lightweight and compact design. With a 4 ohm impedance and 10 watt power rating, the speaker is suitable for use with small audio amplifiers, Bluetooth amplifier modules, DIY portable speakers, mini sound systems, toys, alarm systems, educational kits, and embedded electronic devices. The full-range design allows it to reproduce a wide spectrum of audio frequencies without requiring additional tweeters for many compact applications. Its durable construction and lightweight neodymium magnet assembly make it ideal for applications where both performance and space efficiency are important. ⭐ Features Compact 2.25-inch full range speaker Powerful neodymium magnet 4 ohm impedance 10 watt power rating Clear and balanced sound output Enhanced vocal clarity and midrange performance Lightweight and compact construction Easy to mount in custom enclosures Suitable for portable and embedded audio systems Ideal for DIY electronics and audio projects 📋 Technical Specifications Product Type: Full Range Speaker Driver Speaker Size: 2.25 Inch Impedance: 4 Ohm Power Rating: 10 Watt Magnet Type: Neodymium Speaker Type: Full Range Mounting Type: Enclosure / Panel Mount Application Type: Audio Output Frame Material: Metal Cone Material: Paper Composite Color: Black 🔧 Applications Suitable for: Portable Speaker Systems Bluetooth Speakers DIY Audio Projects Mini Sound Systems Multimedia Devices Toys and Educational Kits Alarm and Notification Systems Embedded Electronic Devices Mini Amplifiers Sound Modules Intercom Systems Custom Speaker Enclosures Robotics and Electronics Projects 📦 Package Includes 1 × 2.25 Inch 4 Ohm 10 Watt Full Range Speaker with Neodymium Magnet ⚠️ Precautions Do not exceed the 10W rated power. Use an amplifier compatible with 4 ohm speakers. Avoid exposure to moisture, water, and excessive dust. Mount the speaker securely to minimize unwanted vibration. Do not apply direct pressure to the speaker cone or surround.
802580 LiPo Battery 700mAh 3.7V High Discharge 25c for Drone
[LiPo Cell] LiPo Battery 700mAh 3.7V High Discharge 802580 3.7V Lithium Polymer Battery • 700mAh Capacity • 25C High Discharge • 802580 Cell • Molex 2.0mm 2-Pin Connector The LiPo Battery 700mAh 3.7V High Discharge 802580 is a compact and lightweight Lithium Polymer (LiPo) rechargeable battery designed for applications that require high current output in a small form factor. Built with high-quality lithium polymer cells, this battery delivers a nominal voltage of 3.7V and a 700mAh capacity, making it ideal for RC toys, drones, mini helicopters, robotics, wireless electronics, and DIY projects. With a 25C continuous discharge rating, this battery can provide rapid bursts of current for motors and other high-power devices. The battery comes with a Molex 2.0mm 2-pin connector and an integrated protection PCB, offering added safety during charging and discharging. The 802580 cell size refers to the approximate dimensions of 8.0 × 25 × 80 mm, allowing the battery to fit easily into compact electronic devices while maintaining excellent power-to-weight performance. Note: This battery is intended for high-discharge applications such as RC models and robotics. It is not recommended for long-duration low-current devices such as cameras or data loggers. ⭐ Features High-quality 3.7V 700mAh LiPo battery 25C continuous discharge capability Compact 802580 cell size Lightweight design Stable voltage output Built-in protection circuit (PCB) Pre-installed Molex 2.0mm 2-pin connector Excellent power-to-weight ratio Rechargeable and reusable Suitable for high-current applications Easy plug-and-play installation 📋 Technical Specifications Product Type: Rechargeable Lithium Polymer (LiPo) Battery Battery Chemistry: Lithium Polymer (Li-ion Polymer) Cell Size: 802580 Nominal Voltage: 3.7V Full Charge Voltage: 4.20V Typical Capacity: 700mAh Discharge Rating: 25C Continuous Dimensions: Approx. 8.0 × 25 × 80 mm Weight: Approx. 18g Connector Type: Molex 2.0mm 2-Pin Protection Circuit: Built-in PCB Protection Rechargeable: Yes 🔧 Applications Suitable for: RC Cars RC Airplanes RC Helicopters Drones & Quadcopters Robotics Projects Arduino Projects ESP32 Projects DIY Electronics Portable Devices Wireless Modules Educational Projects Electronic Prototyping Battery Replacement Projects Miniature Electronics 📦 Package Includes 1 × LiPo Battery 700mAh 3.7V High Discharge 802580 with Molex 2.0mm 2-Pin Connector ⚠️ Safety Instructions Use only LiPo-compatible chargers. Do not charge above 4.20V. Do not discharge below the recommended cut-off voltage. Do not short-circuit the battery terminals. Do not puncture, crush, or expose the battery to fire. Store partially charged in a cool, dry place when not in use. Ensure connector polarity matches your device before connection.
702035 LiPo Battery 400mAh 3.7V High Discharge 25C For Drone
[LiPo Cell] LiPo Battery 400mAh 3.7V High Discharge 702035 3.7V Lithium Polymer Battery • 400mAh Capacity • 25C High Discharge • 702035 Cell • Molex 2.0mm 2-Pin Connector The LiPo Battery 400mAh 3.7V High Discharge 702035 is a compact and lightweight Lithium Polymer (LiPo) rechargeable battery designed for applications that require high current output in a small form factor. Built with high-quality lithium polymer cells, this battery delivers a nominal voltage of 3.7V and a 400mAh capacity, making it ideal for RC toys, drones, mini helicopters, robotics, wireless electronics, and DIY projects. With a 25C continuous discharge rating, this battery can provide rapid bursts of current for motors and other high-power devices. The battery comes with a Molex 2.0mm 2-pin connector and an integrated protection PCB, offering added safety during charging and discharging. The 702035 cell size refers to the approximate dimensions of 7.0 × 20 × 35 mm, allowing the battery to fit easily into compact electronic devices while maintaining excellent power-to-weight performance. Note: This battery is intended for high-discharge applications such as RC models and robotics. It is not recommended for long-duration low-current devices such as cameras or data loggers. ⭐ Features High-quality 3.7V 400mAh LiPo battery 25C continuous discharge capability Compact 702035 cell size Lightweight design Stable voltage output Built-in protection circuit (PCB) Pre-installed Molex 2.0mm 2-pin connector Excellent power-to-weight ratio Rechargeable and reusable Suitable for high-current applications Easy plug-and-play installation 📋 Technical Specifications Product Type: Rechargeable Lithium Polymer (LiPo) Battery Battery Chemistry: Lithium Polymer (Li-ion Polymer) Cell Size: 702035 Nominal Voltage: 3.7V Full Charge Voltage: 4.20V Typical Capacity: 400mAh Discharge Rating: 25C Continuous Dimensions: Approx. 7.0 × 20 × 35 mm Weight: Approx. 12g Connector Type: Molex 2.0mm 2-Pin Protection Circuit: Built-in PCB Protection Rechargeable: Yes 🔧 Applications Suitable for: RC Cars RC Airplanes RC Helicopters Drones & Quadcopters Robotics Projects Arduino Projects ESP32 Projects DIY Electronics Portable Devices Wireless Modules Educational Projects Electronic Prototyping Battery Replacement Projects Miniature Electronics 📦 Package Includes 1 × LiPo Battery 400mAh 3.7V High Discharge 702035 with Molex 2.0mm 2-Pin Connector
ESP32-C3 Super Mini Development Board With Headers Pins
[ESP Modules] Ultra Compact • Wi-Fi & BLE 5.0 • USB Type-C • Perfect for IoT & Embedded Projects The ESP32-C3 Super Mini Development Board is a compact, feature-rich development board built around the powerful ESP32-C3 SoC from Espressif. Powered by a 32-bit RISC-V single-core processor running at up to 160MHz, it combines 2.4GHz Wi-Fi, Bluetooth 5.0 Low Energy (BLE), and low-power operation in an ultra-small form factor. Designed for IoT, smart home, wireless communication, automation, and embedded system development, the ESP32-C3 Super Mini offers 4MB Flash memory, 400KB SRAM, multiple GPIOs, ADC, PWM, UART, SPI, and I2C interfaces for connecting sensors, displays, relays, and other peripherals. The onboard USB Type-C interface simplifies programming and power supply, while the built-in USB-to-Serial functionality enables quick firmware uploading without requiring additional programmers. Fully compatible with Arduino IDE, ESP-IDF, PlatformIO, and MicroPython, it is suitable for beginners, students, makers, and professional developers. Its ultra-compact breadboard-friendly design makes it ideal for portable and space-constrained projects where performance, wireless connectivity, and energy efficiency are essential. Note: Programming, software configuration, driver installation, firmware flashing, and coding-related issues are not covered under return or replacement. Users are expected to troubleshoot software-related issues independently. ⭐ Features Powerful ESP32-C3 32-bit RISC-V processor CPU frequency up to 160MHz Built-in 2.4GHz Wi-Fi (802.11 b/g/n) Integrated Bluetooth 5.0 Low Energy (BLE) Ultra-compact Super Mini design Breadboard-friendly layout USB Type-C interface for programming and power 4MB onboard Flash memory 400KB SRAM Multiple GPIO, ADC, PWM, UART, SPI & I2C interfaces Low power consumption with Deep Sleep mode Onboard programmable LED Compatible with Arduino IDE, ESP-IDF, PlatformIO & MicroPython Ideal for IoT, automation, robotics, and wireless applications 📋 Technical Specifications Product Type: Development Board Board Model: ESP32-C3 Super Mini Microcontroller: ESP32-C3 Processor Architecture: 32-bit RISC-V CPU Frequency: Up to 160MHz Core: Single Core Flash Memory: 4MB SRAM: 400KB Wi-Fi Standard: IEEE 802.11 b/g/n (2.4GHz) Bluetooth: Bluetooth 5.0 Low Energy (BLE) Operating Voltage: 3.3V Input Voltage: 5V via USB Type-C or 3.3V External USB Interface: USB Type-C GPIO: Multiple Digital GPIO Pins Analog Input: Up to 6 ADC Channels PWM: Supported UART: Supported SPI: Supported I2C: Supported USB-to-Serial: Onboard Onboard LED: User Programmable (GPIO8) Power Consumption: Ultra Low (Deep Sleep ≈ 43µA) Dimensions: Approx. 22.5 × 18 mm Headers: Pre-Soldered 🔧 Applications Suitable for: Internet of Things (IoT) Smart Home Automation Wireless Sensor Networks Home Automation Systems Bluetooth Low Energy Devices Wi-Fi Enabled Controllers Robotics Projects Data Logging Systems Remote Monitoring Industrial Automation Portable Embedded Devices Educational Learning DIY Electronics Projects Wearable Electronics Rapid Prototyping 📦 Package Includes 1 × ESP32-C3 Super Mini Development Board Pin Headers ⚠️ Note Programming, firmware installation, software configuration, and driver-related issues are not covered under warranty, return, or replacement. Please verify board compatibility and install the appropriate development environment before programming. Soldered and non-soldered header pin depend on stock
Type-C USB 5V 2A Step-Up Boost Converter with USB Charger
[Li-ion Rechargeable Battery Charger, Step UP Buck Converter] Build your own portable power solutions with the Type-C USB 5V 2A Step-Up Boost Converter Power Bank Module — a compact and efficient charging solution designed for DIY power banks and USB-powered devices. This versatile module supports battery charging and 5V boost output, allowing you to convert battery voltage into a stable 5V USB output for powering smartphones, microcontrollers, and other USB devices. Equipped with a Type-C input, high-efficiency boost circuit, and intelligent power management, this module ensures reliable performance, fast charging, and safe operation. It also supports simultaneous charging and discharging, making it perfect for uninterrupted power supply applications. Key Features 🔋 2-in-1 Charging + Boost ModuleCharge your lithium battery while simultaneously providing a stable 5V output. ⚡ Stable 5V 2A OutputDelivers consistent power for USB devices like smartphones, Arduino, ESP32, and more. 🔌 Type-C USB InputModern and widely compatible input for easy charging (5V–5.5V). 🔄 High Efficiency Boost Conversion (Up to 92.5%)Minimizes power loss and improves battery life. 🧠 Smart Power ManagementAutomatically controls charging cycles, output switching, and battery protection. 🔘 External Button Control Support Short press: Turn ON output & display Double press: Turn OFF output 🔧 DIY Friendly DesignIncludes USB-A solder pads for custom builds and integrations. Working Functions 🔹 Auto shutdown when load current < 50mA🔹 Auto stop charging when current drops to 100mA🔹 Auto recharge when battery voltage < 4.1V🔹 Pre-charge mode below 2.8V (180mA safe charging)🔹 Supports charging while discharging Specifications Specification Description Input Voltage 5V – 5.5V (Type-C USB) Charging Cut-off Voltage 4.2V / 4.35V ±0.5% Charging Current 2.4A ±5% Boost Output Voltage 5V – 5.15V Output Current Up to 2A Efficiency Up to 92.5% Output Ripple 100mV Quiescent Current 30µA Material Metal + Plastic Applications 🔋 DIY Power Banks📱 Mobile Charging Projects🔧 Arduino / ESP32 Power Supply🔌 USB Device Power Modules🚗 Portable Electronics🧪 Embedded Systems & Prototyping Package Includes 1 × Type-C USB 5V 2A Step-Up Boost Converter Power Bank Module
Out of stock803040 3.7V 1000mAh LiPo Battery | Rechargeable Lithium Polymer Battery Cell
[LiPo Cell] The 803040 3.7V 1000mAh Lithium Polymer Battery is a lightweight and compact rechargeable battery designed for portable electronic devices and embedded applications. With a stable 3.7V nominal voltage and 1000mAh capacity, it provides reliable power for IoT projects, DIY electronics, Bluetooth devices, and wearable gadgets. This LiPo battery features a flat pouch design that allows easy integration into compact devices. The high energy density and stable discharge characteristics make it suitable for applications requiring long-lasting power in a small form factor. The battery can be charged using standard LiPo charging modules and provides dependable performance for hobby electronics and portable systems. 🔹 Key Features Nominal Voltage 3.7V Capacity 1000mAh Lightweight and compact pouch design Rechargeable Lithium Polymer battery High energy density Low self-discharge rate Stable discharge performance Suitable for portable electronics 🔹 Technical Specifications Parameter Specification Model 803040 Battery Type Lithium Polymer (LiPo) Nominal Voltage 3.7V Fully Charged Voltage 4.2V Capacity 1000mAh Charging Method CC-CV Discharge Cut-off Voltage 3.0V Cell Type Pouch Cell Rechargeable Yes 🔹 Applications DIY electronics projects IoT devices Bluetooth modules Portable gadgets GPS devices Wearable electronics Robotics projects Power banks 🔹 Package Includes 1 × 803040 3.7V 1000mAh Lithium Polymer Rechargeable Battery ⚠ Battery color and label may vary depending on batch. ⚠ Safety Instructions Do not short circuit the battery terminals. Do not charge above 4.2V. Do not discharge below 3.0V. Use a LiPo compatible charger. Do not puncture or expose to fire. Do not charge unattended. Store in a cool and dry place.
Nickel Strip 0.12mm × 5mm 1P Plane Coated Nickel Welding Strip for 18650 Lithium Battery Pack – 1 Meter
[Nickel Strip] The Nickel Strip 0.12mm × 5mm 1P Plane Coated Nickel Welding Strip is specially designed for assembling and repairing 18650 lithium battery packs and other rechargeable battery modules. Made from nickel-coated steel, this strip provides a strong mechanical bond, good electrical conductivity, and excellent weldability. Its flat 1P plane design ensures stable current flow and reliable cell connections. The nickel coating protects against rust and corrosion, making it suitable for long-term use in power banks, e-bike battery packs, solar storage systems, UPS batteries, and DIY lithium battery projects. Supplied in a convenient 1 meter length, this strip is easy to cut, bend, and shape according to your battery pack layout. 🔹 Key Features Made from nickel-coated steel for strength and durability Size: 0.12mm thickness × 5mm width Flat 1P plane strip design Good electrical conductivity and strong weld joints Excellent for spot welding lithium battery cells Corrosion-resistant nickel coating Easy to cut, bend, and form Suitable for 18650, 21700, 26650 lithium cells 🔹 Technical Specifications Material: Nickel-coated steel (Coated Nickel) Thickness: 0.12 mm Width: 5 mm Type: 1P Plane Flat Strip Length: 1 Meter Color: Silver Application: Spot welding for lithium battery packs Compatible Cells: 18650, 21700, 26650 and similar cylindrical cells Conductivity: Good Corrosion Resistance: High (nickel-coated surface) 🔹 Applications 18650 lithium battery pack assembly Power bank manufacturing and repair E-bike and electric vehicle battery packs Solar battery storage systems UPS and inverter battery packs DIY lithium battery projects Battery repair and maintenance 🔹 Package Contents 1 × Coated Nickel Welding Strip (0.12mm × 5mm, Length: 1 Meter)
Nickel Strip 0.12mm × 4mm 1P Plane Coated Nickel Welding Strip for 18650 Lithium Battery Pack – 1 Meter
[Nickel Strip] The Nickel Strip 0.12mm × 4mm 1P Plane Coated Nickel Welding Strip is specially designed for assembling and repairing 18650 lithium battery packs and other rechargeable battery modules. Made from nickel-coated steel, this strip provides a strong mechanical bond, good electrical conductivity, and excellent weldability. Its flat 1P plane design ensures stable current flow and reliable cell connections. The nickel coating protects against rust and corrosion, making it suitable for long-term use in power banks, e-bike battery packs, solar storage systems, UPS batteries, and DIY lithium battery projects. Supplied in a convenient 1 meter length, this strip is easy to cut, bend, and shape according to your battery pack layout. 🔹 Key Features Made from nickel-coated steel for strength and durability Size: 0.12mm thickness × 4mm width Flat 1P plane strip design Good electrical conductivity and strong weld joints Excellent for spot welding lithium battery cells Corrosion-resistant nickel coating Easy to cut, bend, and form Suitable for 18650, 21700, 26650 lithium cells 🔹 Technical Specifications Material: Nickel-coated steel (Coated Nickel) Thickness: 0.12 mm Width: 4 mm Type: 1P Plane Flat Strip Length: 1 Meter Color: Silver Application: Spot welding for lithium battery packs Compatible Cells: 18650, 21700, 26650 and similar cylindrical cells Conductivity: Good Corrosion Resistance: High (nickel-coated surface) 🔹 Applications 18650 lithium battery pack assembly Power bank manufacturing and repair E-bike and electric vehicle battery packs Solar battery storage systems UPS and inverter battery packs DIY lithium battery projects Battery repair and maintenance 🔹 Package Contents 1 × Coated Nickel Welding Strip (0.12mm × 4mm, Length: 1 Meter)
ESP32 Development Board with WiFi & Bluetooth – CH340C USB Type-C
[ESP Modules] The ESP32 Development Board with WiFi & Bluetooth (CH340C, Type-C) is a powerful and versatile microcontroller board designed for modern wireless and IoT applications. It features a dual-core processor and integrated 2.4GHz WiFi and Bluetooth (Classic + BLE) connectivity. This board includes an onboard CH340C USB-to-Serial converter, which allows easy programming and communication without requiring an external crystal oscillator. The USB Type-C port provides a stable and reversible connection for power and data. With a wide range of GPIO pins and peripherals such as ADC, DAC, PWM, UART, SPI, and I2C, this board is perfect for building home automation systems, smart devices, IoT nodes, robotics controllers, sensor networks, web servers, and wireless projects. It is fully compatible with Arduino IDE, ESP-IDF, and MicroPython, making it suitable for beginners, students, and professional developers. 🔹 Key Features Based on ESP32 dual-core microcontroller Built-in WiFi 802.11 b/g/n and Bluetooth v4.2 (Classic + BLE) Onboard CH340C USB-to-Serial converter (no external crystal required) Modern USB Type-C connector for power and programming Dual-core CPU up to 240 MHz for high-performance applications Multiple GPIO pins with ADC, DAC, PWM support Supports Arduino IDE, ESP-IDF, and MicroPython Low-power modes including deep sleep for battery-powered projects Compact design with breadboard-friendly layout Ideal for IoT, automation, robotics, smart home, and DIY electronics 🔹 Technical Specifications Microcontroller: ESP32 CPU: Dual-core Tensilica LX6, up to 240 MHz Flash Memory: 4 MB (typical, may vary by batch) SRAM: 520 KB Wireless Connectivity: WiFi: 2.4 GHz, 802.11 b/g/n Bluetooth: v4.2, Classic + BLE USB Interface: USB Type-C USB-to-Serial Chip: CH340C Operating Voltage: 3.3 V Input Voltage: 5 V via USB Logic Level: 3.3 V GPIO Pins: 30+ multifunction pins Peripherals: ADC, DAC, PWM, UART, SPI, I2C, I2S Clock Frequency: Up to 240 MHz Programming Support: Arduino IDE, ESP-IDF, MicroPython Onboard Components: Reset & Boot buttons, voltage regulator, status LEDs Form Factor: Standard ESP32 Dev Board size 🔹 Applications Internet of Things (IoT) projects Home and industrial automation Smart home devices Robotics and motor control Wireless sensor networks Web servers and cloud-connected devices Educational and training projects DIY electronics and prototyping 🔹 Package Contents 1 × ESP32 Development Board with WiFi & Bluetooth (CH340C, USB Type-C)
Type-C USB Mini Humidifier DIY Kit 4 in 1 | 4-Fogger Mist Maker Module | Ultrasonic Atomizer Film Sheet with Driver Board
[Ultrasonic Sensor] The Type-C USB Mini Humidifier DIY Atomizer Kit is a compact ultrasonic mist generation module designed for building or repairing USB-powered humidifiers, aroma diffusers, and fogging systems. Powered directly from a 5V USB Type-C source, the kit features a high-performance driver board and four ultrasonic ceramic atomizer discs that generate a dense, cool mist with low power consumption. Using advanced 108KHz ultrasonic atomization technology, the module converts water into ultra-fine mist particles without producing heat or mechanical noise. The stable driver circuit ensures reliable oscillation, efficient mist production, and long service life, making it an excellent choice for DIY enthusiasts, students, makers, repair technicians, and electronics hobbyists. Simply connect the module to a 5V USB Type-C power source, place the atomizer discs in water, and enjoy instant cool mist generation. It is compatible with custom humidifier enclosures, bottles, containers, 3D-printed projects, hydroponic systems, and decorative fog applications. ⭐ Features USB Type-C powered (5V DC) Four ultrasonic ceramic atomizer discs High-density cool mist output Advanced ultrasonic atomization technology Stable driver circuit for reliable operation Low power consumption Silent operation with no moving parts Compact and lightweight design Easy plug-and-play installation Ideal for DIY humidifiers and aroma diffusers 📋 Technical Specifications Product Type: USB Ultrasonic Humidifier Driver Kit Power Input: USB Type-C Female Operating Voltage: DC 4.5V–5V Input Voltage: 5V USB Operating Current: 300mA (Typical) Power Consumption: 2.5W–3W Rated Power: 2W Operating Frequency: 108KHz ±2KHz Atomizer Quantity: 4 Ceramic Atomizer Discs Atomization Technology: Ultrasonic Mist Output: High Density Fine Mist Driver Board: Ultrasonic Oscillation Control Module Cooling Method: Natural Cooling Power Connector: USB Type-C Female Socket Material: Ceramic Atomizer Discs + PCB Driver Board 🔧 Applications Suitable for: DIY USB Humidifiers Aroma Diffusers Replacement Humidifier Modules Decorative Fog Makers Hydroponic Systems Smart Garden Projects Terrariums & Vivariums Indoor Plant Humidification Science & Educational Projects Prototype Development DIY Electronics Projects 📦 Package Includes 1 × Ultrasonic Driver Circuit Board 4 × Ceramic Ultrasonic Atomizer Discs ⚠️ Note Use only clean water for optimal performance and longer atomizer life. Do not operate the module without water. Product images are for illustrative purposes only. The actual product may vary slightly depending on the manufacturing batch.
Out of stock3.7V 1000mAh Li-Po Battery (503035P) – High-Quality Rechargeable Lithium Polymer Single Cell
[LiPo Cell] The 3.7V 1000mAh Lithium Polymer Battery (503035P) is a premium, high-performance rechargeable Li-Po cell designed for compact and portable electronics. Offering stable 3.7V output with excellent energy density, this lightweight battery is perfect for IoT devices, GPS trackers, Bluetooth gadgets, robotics projects, MP3 players, and various DIY electronics. Built using high-quality polymer materials, the 503035P battery ensures long cycle life, steady power delivery, and enhanced safety. With a built-in protection circuit module (PCM), it safeguards against overcharging, over-discharging, and short circuits—making it a reliable and safe power source for modern electronics that demand stability and durability. Whether you’re replacing an old battery or developing a new portable device, this 3.7V 1000mAh Li-Po cell delivers dependable performance in a slim and compact form factor. ✅ Features High-performance 3.7V Li-Po cell with 1000mAh capacity for long-lasting power Compact 503035P form factor perfect for space-restricted designs Stable and reliable voltage output for sensitive electronics Ideal for IoT modules, GPS trackers, Bluetooth gadgets, wearable tech, MP3 players, and DIY electronics High energy density ensures extended device runtime Includes PCM protection for safe operation—overcharge, over-discharge & short-circuit protection Rechargeable with long cycle life, suitable for continuous daily usage Slim, lightweight design for portable and compact devices 📘 Specifications Battery Type: Lithium Polymer (Li-Po) Model Number: 503035P Nominal Voltage: 3.7V Capacity: 1000mAh Charging Voltage: 4.2V Configuration: Single cell Protection Circuit (PCM): Yes Dimensions (Approx): 50mm × 30mm × 3.5mm Energy Density: High Discharge Rate: Suitable for low to medium power applications Rechargeable: Yes – long cycle life Weight: Lightweight Applications: IoT systems, GPS modules, robotics, Bluetooth devices, MP3 players, portable gadgets, DIY electronics Package Includes: 1 x 3.7V 1000mAh Li-Po Battery (503035P) – High-Quality Rechargeable Lithium Polymer Single Cell
BC557 PNP General Purpose Transistor – TO-92-3 Package
[Transistor] BC557 PNP General Purpose Transistor – TO-92-3 Package BC557 PNP General Purpose Transistor 45V 100mA BC557 is a semiconductor device used to amplify or switch electronic signals and electrical power. This transistor composed of semiconductor material usually with at least three terminals for connection to an external circuit. A voltage or current applied to one pair of the transistor’s terminals controls the current through another pair of terminals. Because the controlled (output) power can be higher than the controlling (input) power, a transistor can amplify a signal. This product is known as BC557, BC557BTA, BC557ATA, BC557BTF, BC557B, BC557C, BC557A, BC557CBK, BC557BBK Features: Low current (max. 100 mA) Low voltage (max. 65 V). Low error voltage Fast switching speed Full-voltage operation High power and current handling capability Features/Specs: Product Type: BJTs – Bipolar Transistors Transistor Polarity: PNP Configuration: Single Collector- Emitter Voltage VCEO Max: 45 V Collector- Base Voltage VCBO: 50 V Emitter- Base Voltage VEBO: 5 V Pd – Power Dissipation: 500 mW Gain Bandwidth Product fT: 100 MHz DC Collector/Base Gain hFE Min: 125 DC Current Gain hFE Max: 125 at 2 mA, 5 V Minimum Operating Temperature: – 65°C Maximum Operating Temperature: + 150°C Mounting Style: Through Hole Package/Case: TO-92-3 Applications: Driver Modules like Relay Driver, LED driver etc.. Amplifier modules like Audio amplifiers, signal Amplifier etc.. Darlington pair Datasheet: BC557 PNP Transistor Package Includes: 1 x BC557 PNP General Purpose Transistor – TO-92-3 Package Note: Product Images are shown for illustrative purposes only and may differ from actual product