All products · 267 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Digital Multimeter
7 functions, 19 ranges. DC voltage 200mV–1kV, AC voltage 200–750V, DC current 200µA–10A, resistance 200–2MΩ, transistor & diode test.
SanDisk Extreme E61 1TB USB 3.2 Gen 2 Type-C Rugged Portable SSD
[Storage] SanDisk Extreme E61 1TB USB 3.2 Gen 2 Type-C Portable Solid State Drive Rugged, high-speed NVMe storage on the go. Delivers blazing read speeds up to 1050 MB/s and write speeds up to 1000 MB/s in a pocket-sized, drop-resistant, IP65 water-and-dust resistant silicone shell with carabiner loop. ⭐ Key Features - Up to 1050 MB/s read and 1000 MB/s write speeds - IP65 water and dust resistance, up to 3-meter drop protection - Handy carabiner loop secures the drive to your belt loop or backpack - 256-bit AES hardware encryption with password protection - Compatible with Windows, Mac, Android, and USB-C iPhones/iPads 📋 Technical Specifications - Capacity: 1TB - Interface: USB 3.2 Gen 2 (Type-C) - Durability: IP65 Rated - Dimensions: 100.54 x 52.42 x 8.95 mm - 5-Year SanDisk Official Warranty 📦 Package Includes - 1 x SanDisk Extreme Portable SSD 1TB - 1 x USB-C to USB-C Cable with USB-A Adapter
Breadboard Kit
Breadboard: 400/830 tie-points. Jumpers: M-M, M-F. Common parts: resistors (¼W), LEDs, push buttons, potentiometer. Modules: LDR, buzzer, IR, PIR, relay. Power module: 3.3V/5V rails (optional).
Filament for 3D Printer (Multicolor pack)
Diameter: 1.75mm. Material: PLA (classroom preferred). Spool: 250g/500g/1kg. Tolerance: ±0.03–0.05mm. Print temp: 190–220°C.
Piezoelectric Plate (4cm)
Normal copper-based piezoelectric plate, ~4cm diameter.
Only 1 leftHookup Wires (Red & Black, 100m each)
Red & Black set, 100 meters each.
Only 2 leftTriple Axis Magnetometer
3-axis magnetoresistive sensor for compass/orientation.
Triple Axis Accelerometer
3-axis accelerometer for tilt/orientation sensing.
ADXL345 Accelerometer
ADXL345 3-axis accelerometer. Interface: I2C/SPI. Supply: 2.0–3.6V (modules often 3.3–5V). Ranges: ±2/±4/±8/±16g.
Potentiometer 10k / 100k
Rotary/trim pot. Values: 10kΩ / 100kΩ. 3 pins (end A, wiper, end B). Variable voltage divider for ADC. Linear taper 'B'.
Power Strip Adapter (5-socket, 5m)
Standard quality extension with 5A safety fuse, 5+ sockets, 5-meter length.
Out of stockBlue Yeti X USB Mic
Four-capsule USB condenser, real-time LED metering, 4 pickup patterns.
Out of stockHeat Shrink Tubing Kit (280 pc, 8 sizes)
2:1 ratio heat shrink, 6 colours × 8 diameters (Ø1.5mm to 13mm). DIY essential.
Out of stockDigital Multimeter DT-830D
Basic 3½ digit DMM, DC/AC voltage + current, resistance, hFE, diode test. Probes included.
Out of stockUNI-T UT61E True-RMS Multimeter
True-RMS 22000-count DMM, USB data logging, autorange. Bench-grade.
Out of stockAC/DC Clamp Meter 600A
Non-contact clamp meter, 600A AC/DC, NCV detection, frequency, capacitance.
Out of stock0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306
[LED/LCD Display] 0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306 The 0.96-inch Blue OLED Display Module is a compact graphical display based on the SSD1306 driver IC, featuring a 128×64 pixel resolution and blue monochrome display. This version has a 7-pin interface with a dedicated CS (Chip Select) pin, making it suitable for 4-wire SPI communication. The module is factory-configured for SPI and can also be modified for I2C/IIC communication on compatible board versions. With its compact size, wide viewing angle and low-power OLED technology, it is suitable for Arduino, ESP32, ESP8266, STM32, Raspberry Pi and other microcontroller projects. ⭐ Key Features 0.96-inch blue OLED display 128 × 64 pixel resolution SSD1306 driver IC 7-pin interface Dedicated CS (Chip Select) pin Factory configured for 4-wire SPI Supports SPI and I2C/IIC with appropriate configuration 3.3V/5V compatible on supported module versions No backlight required Low power consumption Wide viewing angle of more than 160° Compact PCB design Pre-soldered 7-pin male header Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi projects 📋 Technical Specifications Display Type: OLED (Organic Light-Emitting Diode) Display Colour: Blue Display Size: 0.96 inch Driver IC: SSD1306 Resolution: 128 × 64 pixels Interface: SPI / I2C Default Interface: 4-wire SPI Input Voltage: 3.3V–5V Viewing Angle: >160° Module Dimensions: Approximately 27 × 27 × 4mm Operating Temperature: Approximately -30°C to +70°C Header: 7-pin male header, pre-soldered Display Type: Monochrome blue OLED 🔌 7-Pin Interface The 7-pin version provides the following connections: GND – Ground VCC – Power supply D0 / SCK / CLK – SPI clock D1 / MOSI / SDA – SPI data RES / RST – Display reset DC / A0 – Data/Command selection CS – Chip Select 🛠️ SPI Connection The module is normally supplied in 4-wire SPI configuration. For an Arduino Uno, a typical connection is: VCC → 5V GND → GND D0 → SCK / D13 D1 → MOSI / D11 RES → Digital I/O DC → Digital I/O CS → Digital I/O The dedicated CS pin allows the OLED to share the SPI bus with other devices such as SD cards or additional SPI peripherals. 🔄 I2C / IIC Configuration On compatible versions, the module can be converted from SPI to I2C by changing the appropriate resistor configuration on the PCB. The supplied board configuration may require: Moving the resistor from R3 to R1 Shorting R8 with solder Using D0 as SCL Using D1 as SDA Configuring DC for the I2C address The exact resistor positions can vary between board revisions, so check the markings on your particular PCB before modification. 🎯 Applications Arduino projects ESP32 projects ESP8266 projects STM32 development Raspberry Pi projects IoT devices Sensor displays Voltage/current meters Battery monitors Temperature displays Digital clocks Data loggers Portable electronic devices Robotics DIY measuring instruments Embedded systems Menu and status displays 💡 Advantages of OLED OLED technology is self-emissive, meaning the pixels produce their own light and do not require a conventional backlight. This provides high contrast, compact construction and a wide viewing angle while keeping power consumption relatively low. ⚠️ Important Notes This is the 7-pin SPI version, not the 6-pin version. The module is normally configured for SPI communication. Check the PCB labels before connecting the module. Do not exceed the specified supply voltage. Although many versions support 5V operation, the exact voltage tolerance can vary between board revisions. I2C operation may require hardware resistor modification. The actual PCB layout and component markings may vary slightly between production batches. Display colour: Blue. Libraries such as Adafruit SSD1306 and U8g2 can be used with compatible microcontrollers. 📦 Package Includes 1 × 0.96 Inch Blue SPI OLED Display Module
26650 Battery Holder / Battery Spacer 2×1 – 26.3mm Bore Diameter
[Lithium Battery Holder] 26650 Battery Holder / Battery Spacer 2×1 – 26.3mm Bore Diameter The 26650 Battery Holder / Battery Spacer 2×1 is a cylindrical battery spacer designed to securely arrange 26650 lithium-ion battery cells while building multi-cell battery packs. Made from flame-retardant ABS+PC material, it provides a strong and stable structure while allowing air circulation around the cells. The holder features interlocking slots on the edges, allowing multiple spacers to be joined together to create different battery-pack sizes and configurations. After welding nickel strips, the assembled battery pack can achieve a solid and reliable structure without requiring additional connecting hardware. ⭐ Key Features Designed for 26650 cylindrical lithium-ion cells 2 × 1 configuration 26.3mm bore diameter Made from flame-retardant ABS+PC material High-temperature resistant construction Crack-resistant design Interlocking slots for connecting multiple spacers Allows flexible battery-pack configurations Provides mechanical support for battery cells Helps maintain proper spacing between cells Suitable for high-current battery-pack construction Helps improve battery-pack stability and reliability Allows airflow around the cells for heat dissipation 📋 Technical Specifications Product Type: Battery Holder / Battery Spacer Compatible Cell: 26650 cylindrical battery Configuration: 2 × 1 Number of Cells: 2 Bore Diameter: 26.3mm Material: Flame-retardant ABS+PC Construction: Interlocking modular design Mounting: Multiple spacers can be joined together Application: Lithium battery pack assembly Cell Type: Cylindrical Li-ion cells 🔧 Applications 26650 lithium-ion battery packs E-bike battery packs Electric scooter battery packs Electric vehicle battery packs Power-tool battery packs DIY high-current battery packs UPS battery systems Solar energy storage packs Portable power stations Robotics battery packs Custom lithium battery assemblies 🛠️ How to Use The spacer is designed to hold two 26650 cells in a 2×1 arrangement. Multiple spacers can be connected through the slots provided around the edges to create larger battery-pack configurations. For a complete battery pack: Cell → Spacer → Nickel Strip Welding → Additional Spacers → Battery Pack For mechanical support, spacers can be positioned at the top and bottom of the cells. Important: For each individual battery cell, 2 spacers are recommended—one at the top and one at the bottom. 💡 Advantages Simple Assembly: Easy to arrange cylindrical cells. Flexible Design: Multiple spacers can be interconnected to create different pack shapes. Strong Construction: Helps keep cells firmly positioned. Heat Dissipation: Provides spacing between cells and allows airflow. Reliable Battery Pack: Helps make the completed pack mechanically stable. Suitable for Complex Packs: Useful for custom battery configurations, including e-bike and high-current applications. ⚠️ Important Notes This product is only a battery holder/spacer; batteries are not included. The 26.3mm bore is intended for compatible 26650 cells. Check your actual cell diameter before purchase. Do not force oversized cells into the holder. Battery cells should be properly insulated and securely assembled. Use suitable nickel strip and an appropriate spot-welding method. Use a suitable BMS/protection system for the completed lithium battery pack. Battery cells should be properly matched before assembling a multi-cell pack. 2 spacers are recommended per individual cell, one on each end. Keep the battery assembly away from excessive heat, moisture and physical damage. 📦 Package Includes 1 × 26650 Battery Holder / Battery Spacer – 2×1, 26.3mm Bore Diameter Note: Battery cells, nickel strips and BMS are not included.
Type-C PD/QC/AFC Fast Charge Decoy Trigger Module – 5V/9V/12V/15V/20V Fixed Output
[Step UP Buck Converter] Type-C PD/QC/AFC Fast Charge Decoy Trigger Module – 5V/9V/12V/15V/20V Fixed Output The Type-C PD/QC/AFC Fast Charge Decoy Trigger Module is a compact USB Type-C power negotiation module designed to request a selected voltage from compatible USB Type-C fast chargers and power banks. It supports QC 2.0/3.0, AFC, PD 2.0 and PD 3.0 protocols, allowing compatible USB-C power sources to provide higher voltage outputs such as 5V, 9V, 12V, 15V or 20V. This module is useful for DIY electronics projects where a USB Type-C PD/QC charger needs to be used as a DC power source for equipment that does not have native USB-C fast-charging support. ⭐ Key Features USB Type-C fast-charge decoy/trigger module Supports PD 2.0 / PD 3.0 Supports QC 2.0 / QC 3.0 Supports Samsung AFC Fixed selectable voltage output Supports 5V / 9V / 12V / 15V / 20V output options Negotiates the required voltage from a compatible charger Suitable for USB-C power banks and PD adapters LED indicators for operating/status indication Compact and lightweight PCB design Useful for DIY power supply and electronics projects Plug-and-play operation with compatible USB-C power sources 📋 Technical Specifications Product Type: USB Type-C Fast Charge Trigger / Decoy Module Input Connector: USB Type-C Input Source: USB-C PD/QC/AFC compatible charger or power bank Supported Protocols: PD2.0, PD3.0, QC2.0, QC3.0, AFC Output Voltage: 5V / 9V / 12V / 15V / 20V Output Type: DC Voltage Selection: Fixed/selectable depending on module version Indicator: LED status indicators Application: DC power conversion and fast-charge voltage triggering 🔧 Applications Converting USB-C PD chargers into DC power supplies Powering DIY electronics projects Arduino and microcontroller projects LED applications Portable electronic equipment DIY laboratory power supplies DC motors and other suitable loads Router/modem power applications where the required voltage matches Powering electronics from USB-C PD power banks Replacing conventional DC adapters with USB-C PD sources 🛠️ How It Works The module does not boost the USB voltage itself. Instead, it communicates with a compatible USB-C power source and sends the required PD/QC/AFC negotiation request. For example, when connected to a compatible PD charger, the module can request: 5V → 9V → 12V → 15V → 20V The charger then provides the negotiated voltage at the module's DC output. ⚠️ Important Notes The connected USB-C charger or power bank must support the required fast-charging protocol and voltage. A standard 5V-only USB charger cannot normally provide 9V/12V/15V/20V through this module. Always verify the selected output voltage with a multimeter before connecting your device. Do not connect a device that requires a lower voltage than the selected output. The module is a trigger/decoy board, not a standalone DC-DC boost converter. Maximum available output power/current depends on the connected USB-C charger/power bank and the module's specifications. Do not short the output terminals. 20V output can damage 5V/9V/12V-only electronics if the wrong voltage is selected. Exact selectable voltages and current capability can vary between board versions. 📦 Package Includes 1 × Type-C PD/QC/AFC Fast Charge Decoy Trigger Module
Digital USB Mobile Power Charging Current Voltage Tester Meter
[Ammeter and Voltmeter] Digital USB Mobile Power Charging Current Voltage Tester Meter The Digital USB Mobile Power Charging Current Voltage Tester Meter is a compact USB testing device designed to measure and display charging voltage and current in real time. It is useful for checking the power output of USB chargers, power banks and other USB-powered devices. ⭐ Key Features Precise current and voltage measurement Simultaneous voltage and current display Bright digital LCD display Straight USB connector design USB Type-A Male input and USB Type-A Female output Compact and lightweight Easy to connect and use Suitable for USB chargers and power banks Compatible with USB-powered devices 📋 Technical Specifications Product Name: Digital USB Mobile Power Charging Current Voltage Tester Meter Color: As per available stock Input Voltage: 3.5V–7.0V Output Voltage: 3.5V–7.0V Current Measurement Range: 0A–3A Voltage Accuracy: ±1% Current Accuracy: ±1% Display Type: Digital LCD Display Screen Size: 0.91 inch Data Display: Voltage and Current simultaneously Power Consumption: ≤0.1W Interface: USB Type-A Male (Input) / USB Type-A Female (Output) Measurement Frequency: 2 times per second Operating Temperature: 0°C–45°C Material: ABS Plastic Dimensions: 64 × 23 × 15mm Weight: 15g Compatibility: USB-powered devices 🔧 Applications Mobile charger testing USB charger testing Power bank testing USB power supply testing Mobile phone charging analysis USB device testing Electronics troubleshooting DIY electronics projects Checking charging voltage and current 🛠️ How to Use Insert the USB Type-A Male connector into the USB charger, power bank or USB power source. Connect the USB-powered device to the USB Type-A Female output. The digital display will show the voltage and charging current. Monitor the readings during charging or testing. 📦 Package Includes 1 × Digital USB Mobile Power Charging Current Voltage Tester Meter ⚠️ Important Notes Do not exceed the specified voltage and current measurement ranges. This tester is intended for USB/DC applications. Actual readings may vary depending on the charger, cable and connected device. Use within the specified operating temperature range.
KWS-MX18 10-in-1 USB Tester Digital LCD Voltage, Current & Power Meter
[Ammeter and Voltmeter] KWS-MX18 10-in-1 USB Tester – Digital LCD Voltage, Current & Power Meter The KWS-MX18 10-in-1 USB Tester is a compact multifunction digital testing instrument designed for monitoring and evaluating USB chargers, power banks, USB ports, mobile charging systems, and other DC power sources. It provides real-time measurement of voltage, current, power, capacity, energy, charging time, resistance, and internal temperature on its digital display. The tester supports a DC voltage range of 4–30V and current measurement up to approximately 5.1A, with power measurement up to 150W. It also provides capacity and energy monitoring, making it useful for checking the actual charging performance and capacity of USB power supplies and power banks. ⭐ Key Features 10-in-1 multifunction USB tester Digital LCD display Real-time voltage and current monitoring Measures power consumption Measures accumulated charging capacity Measures energy consumption Charging time measurement Charging resistance measurement Internal temperature measurement Positive and negative voltage measurement Stores measurement data in 9 groups Power-off memory function Compact and lightweight design Suitable for USB charger and power-bank testing Supports QC2.0 / QC3.0 according to available product information 📋 Technical Specifications Product Type: 10-in-1 USB Digital Tester Model: KWS-MX18 Input Voltage Range: DC 4–30V Current Measurement: 0–5.1A Power Measurement: 0–150W Capacity Measurement: 0–999999mAh Energy Measurement: 0–999999mWh Timing Range: 0–99 Hours Charging Resistance: 0–999.9Ω Internal Temperature: 0–80°C Positive Voltage Measurement: 0–10V Negative Voltage Measurement: 0–10V Memory Groups: 1–9 Display: Digital LCD Material: ABS Dimensions: Approximately 56.6 × 24.7 × 11.2mm Weight: Approximately 13.9g Input Connector: USB Output Connector: USB Function Button: Yes 🔍 10 Measurement Functions Voltage: 4–30V DC Current: 0–5.1A Power: 0–150W Capacity: 0–999999mAh Energy: 0–999999mWh Charging Time: 0–99 hours Charging Resistance: 0–999.9Ω Positive Voltage: 0–10V Negative Voltage: 0–10V Internal Temperature: 0–80°C 💾 Memory Function The KWS-MX18 can store charging measurement information in 9 separate memory groups. This allows you to compare charging capacity and energy measurements from different chargers or devices. The stored data can be viewed using the function button, and an individual memory group can be cleared by holding the button for approximately 3 seconds. 🔘 Button Functions Single Press: View stored measurement data from memory groups 1–9. Long Press: Clear the currently selected memory group. Double Press: Change the display page. Calibration: The device supports voltage and current calibration according to the supplied manual. 🔌 Applications USB Charger Testing Mobile Charger Testing Power Bank Testing USB Port Testing Mobile Phone Charging Analysis USB Cable Testing Power Supply Monitoring DC Power Measurement Electronics Troubleshooting DIY Electronics Projects Charger Performance Testing Battery Charging Analysis 🛠️ How to Use Connect the KWS-MX18 in-line between the USB power source and the USB-powered device. Once powered, the LCD displays the measured electrical parameters. You can use the function button to change display pages and access stored measurement data. It is particularly useful for comparing chargers, power banks, cables, and USB ports by monitoring actual voltage, current, power, capacity, and energy delivered. 📦 Package Includes 1 × KWS-MX18 10-in-1 USB Digital Tester ⚠️ Color Note: Color: White / Black Color will be shipped depending on stock availability. Any one color (White or Black) may be shipped based on available stock. Specific color cannot be guaranteed. ⚠️ Precautions Do not exceed the specified 30V DC input voltage. Do not exceed the specified current measurement range. Ensure correct USB connection direction before use. Keep the tester away from water and excessive moisture. Do not use it for measuring mains AC voltage. The device is intended for DC/USB power measurement. Actual measurement accuracy can depend on the connected source, load, cable, and operating conditions.
1K Ohm Rotary Potentiometer Round Shaft 3 Pin Elcon
[Potentiometer] 1KΩ Rotary Potentiometer Round Shaft Elcon The 1KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 1KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 10mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 1KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 10mm Body Diameter / Width: 16mm Total Height: Approx. 25mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 1KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 1KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch before installation.
5K Ohms Rotary Potentiometer Round Shaft 3 Pin Elcon
[Potentiometer] 5KΩ Rotary Potentiometer Round Shaft Elcon The 5KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 5KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 13mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 5KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 13mm Body Diameter / Width: 16mm Total Height: Approx. 28mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 5KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 5KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch
16 sq mm Copper Ring Lug Cable Terminal
[Terminal Connector] 16 sq mm Pure Copper Ring Lug Cable Terminal The 16 sq mm Pure Copper Ring Lug Cable Terminal is a high-quality electrical cable lug designed for making secure and reliable connections in high-current electrical systems. Made from pure copper, it provides excellent electrical conductivity and a strong mechanical connection between the cable and the terminal point. The ring lug design allows the terminal to be securely fastened to battery terminals, busbars, studs, bolts, and other electrical connection points. It is suitable for battery packs, inverters, UPS systems, solar installations, automotive wiring, and industrial electrical applications. The compact construction provides a reliable connection while allowing easy installation using a suitable crimping tool. The terminal is ideal for applications where a strong and low-resistance electrical connection is required. ⭐ Key Features Made from pure copper Designed for 16 sq mm cable Ring lug terminal design Excellent electrical conductivity Strong and reliable mechanical connection Suitable for high-current applications Easy bolt and stud mounting Suitable for battery and power wiring Ideal for electrical and DIY applications 📋 Technical Specifications Product Type: Copper Ring Cable Lug Material: Pure Copper Compatible Cable Size: 16 sq mm Terminal Type: Ring Lug Finish: Natural Copper / Tinned, depending on variant Connection Type: Bolt / Stud Mount Application: High-Current Electrical Connections 🔧 Applications Lithium Battery Packs LiFePO₄ Battery Systems Lead-Acid Batteries Inverter Connections UPS Systems Solar Power Systems Automotive Wiring Electrical Panels Power Distribution Industrial Wiring DIY Battery Projects 📦 Package Includes 1 × 16 sq mm Pure Copper Ring Lug Cable Terminal ⚠️ Precautions Select the correct lug according to the 16 sq mm cable size and required mounting hole diameter. Use a suitable cable-lug crimping tool for a secure connection. Ensure the cable is properly inserted and crimped before use. Do not exceed the safe current capacity of the cable and terminal assembly. Ensure all electrical connections are properly insulated and secured.