All products · 111 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Logitech MX Master 4 Wireless Ergonomic Mouse (Graphite)
[Mouse] Logitech MX Master 4 Wireless Ergonomic Productivity Mouse - Graphite The gold standard in productivity. Features Quiet Clicks, 8,000 DPI Darkfield sensor that tracks anywhere (even on glass), MagSpeed electromagnetic scrolling up to 1,000 lines per second, and multi-device Logi Bolt + Bluetooth connectivity. ⭐ Key Features - MagSpeed Electromagnetic Scrolling: Ultra-fast, ultra-quiet, pixel-precise - 8,000 DPI Darkfield High Precision sensor tracks on any surface including glass - Quiet Click buttons reduce click noise by 90% - Cross-computer Flow control between up to 3 PCs or Macs - USB-C Quick Charging: Up to 70 days battery life on full charge; 3 hours from 1 minute charge 📋 Technical Specifications - Sensor: Darkfield high precision (200 - 8000 DPI) - Buttons: 7 buttons (Left/Right, Back/Forward, App-Switch, Wheel mode-shift, Middle click) - Wireless: Bluetooth Low Energy + Logi Bolt USB Receiver (10m range) - Battery: Rechargeable Li-Po (500 mAh) - Weight: 141 grams 📦 Package Includes - 1 x Logitech MX Master 4 Mouse (Graphite) - 1 x Logi Bolt USB Receiver - 1 x USB-C Charging Cable
Only 2 leftRC Car Kit
Chassis: 2WD/4WD. Motors: TT DC geared motors (3–6V) or higher. Driver: L298N/L293D. Controller: Arduino/ESP32 optional. Remote: IR/2.4GHz/Bluetooth. Power: 2×18650 or 4×AA. Optional ultrasonic/line sensor.
7-Segment LED Display (4-digit)
LED 4-digit display module with clock point, 4-pin Dupont line for Arduino.
Only 2 leftIR Sensor Array (Line Following)
IR sensor array for line-following robots.
Potentiometer 10k / 100k
Rotary/trim pot. Values: 10kΩ / 100kΩ. 3 pins (end A, wiper, end B). Variable voltage divider for ADC. Linear taper 'B'.
Out of stockRazer Huntsman Mini 60%
60% optical-mechanical, Razer Linear/Clicky optical switches.
Out of stockBench Power Supply 30V 5A Variable
Linear DC bench PSU, 30V × 5A, CV/CC modes, dual LED display.
Out of stockORICO Dual-Bay HDD Dock USB 3.0
Dual-bay 2.5" + 3.5" SATA dock, hot-swap, offline clone mode.
KWS-MX18 10-in-1 USB Tester Digital LCD Voltage, Current & Power Meter
[Ammeter and Voltmeter] KWS-MX18 10-in-1 USB Tester – Digital LCD Voltage, Current & Power Meter The KWS-MX18 10-in-1 USB Tester is a compact multifunction digital testing instrument designed for monitoring and evaluating USB chargers, power banks, USB ports, mobile charging systems, and other DC power sources. It provides real-time measurement of voltage, current, power, capacity, energy, charging time, resistance, and internal temperature on its digital display. The tester supports a DC voltage range of 4–30V and current measurement up to approximately 5.1A, with power measurement up to 150W. It also provides capacity and energy monitoring, making it useful for checking the actual charging performance and capacity of USB power supplies and power banks. ⭐ Key Features 10-in-1 multifunction USB tester Digital LCD display Real-time voltage and current monitoring Measures power consumption Measures accumulated charging capacity Measures energy consumption Charging time measurement Charging resistance measurement Internal temperature measurement Positive and negative voltage measurement Stores measurement data in 9 groups Power-off memory function Compact and lightweight design Suitable for USB charger and power-bank testing Supports QC2.0 / QC3.0 according to available product information 📋 Technical Specifications Product Type: 10-in-1 USB Digital Tester Model: KWS-MX18 Input Voltage Range: DC 4–30V Current Measurement: 0–5.1A Power Measurement: 0–150W Capacity Measurement: 0–999999mAh Energy Measurement: 0–999999mWh Timing Range: 0–99 Hours Charging Resistance: 0–999.9Ω Internal Temperature: 0–80°C Positive Voltage Measurement: 0–10V Negative Voltage Measurement: 0–10V Memory Groups: 1–9 Display: Digital LCD Material: ABS Dimensions: Approximately 56.6 × 24.7 × 11.2mm Weight: Approximately 13.9g Input Connector: USB Output Connector: USB Function Button: Yes 🔍 10 Measurement Functions Voltage: 4–30V DC Current: 0–5.1A Power: 0–150W Capacity: 0–999999mAh Energy: 0–999999mWh Charging Time: 0–99 hours Charging Resistance: 0–999.9Ω Positive Voltage: 0–10V Negative Voltage: 0–10V Internal Temperature: 0–80°C 💾 Memory Function The KWS-MX18 can store charging measurement information in 9 separate memory groups. This allows you to compare charging capacity and energy measurements from different chargers or devices. The stored data can be viewed using the function button, and an individual memory group can be cleared by holding the button for approximately 3 seconds. 🔘 Button Functions Single Press: View stored measurement data from memory groups 1–9. Long Press: Clear the currently selected memory group. Double Press: Change the display page. Calibration: The device supports voltage and current calibration according to the supplied manual. 🔌 Applications USB Charger Testing Mobile Charger Testing Power Bank Testing USB Port Testing Mobile Phone Charging Analysis USB Cable Testing Power Supply Monitoring DC Power Measurement Electronics Troubleshooting DIY Electronics Projects Charger Performance Testing Battery Charging Analysis 🛠️ How to Use Connect the KWS-MX18 in-line between the USB power source and the USB-powered device. Once powered, the LCD displays the measured electrical parameters. You can use the function button to change display pages and access stored measurement data. It is particularly useful for comparing chargers, power banks, cables, and USB ports by monitoring actual voltage, current, power, capacity, and energy delivered. 📦 Package Includes 1 × KWS-MX18 10-in-1 USB Digital Tester ⚠️ Color Note: Color: White / Black Color will be shipped depending on stock availability. Any one color (White or Black) may be shipped based on available stock. Specific color cannot be guaranteed. ⚠️ Precautions Do not exceed the specified 30V DC input voltage. Do not exceed the specified current measurement range. Ensure correct USB connection direction before use. Keep the tester away from water and excessive moisture. Do not use it for measuring mains AC voltage. The device is intended for DC/USB power measurement. Actual measurement accuracy can depend on the connected source, load, cable, and operating conditions.
1K Ohm Rotary Potentiometer Round Shaft 3 Pin Elcon
[Potentiometer] 1KΩ Rotary Potentiometer Round Shaft Elcon The 1KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 1KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 10mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 1KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 10mm Body Diameter / Width: 16mm Total Height: Approx. 25mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 1KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 1KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch before installation.
5K Ohms Rotary Potentiometer Round Shaft 3 Pin Elcon
[Potentiometer] 5KΩ Rotary Potentiometer Round Shaft Elcon The 5KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 5KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 13mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 5KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 13mm Body Diameter / Width: 16mm Total Height: Approx. 28mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 5KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 5KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch
107 × 61mm 5V 180mA Mini Solar Panel Cell Module
[Solar Panel] ☀️ 107 × 61mm 5V 180mA Mini Solar Panel Cell Module (0.9W) 5V Output • 180mA Current • Polycrystalline Solar Cell • Compact & Lightweight • DIY Solar Projects The 107 × 61mm Mini Solar Panel Cell Module is a compact and efficient photovoltaic module designed to convert sunlight into clean and renewable electrical energy. Delivering a stable 5V output with a maximum current of 180mA, this solar panel is ideal for powering small electronic devices, battery charging circuits, educational projects, and DIY solar applications. Built using high-quality polycrystalline silicon solar cells, the panel provides efficient energy conversion with reliable performance under direct sunlight. Its compact size and lightweight construction make it easy to integrate into portable electronics, robotics, IoT devices, and renewable energy projects. Designed with a durable, weather-resistant construction, the module is suitable for both indoor demonstrations and outdoor applications. Pre-drilled mounting holes allow quick installation on enclosures, backpacks, models, and custom solar-powered devices. ⭐ Features High-efficiency polycrystalline solar panel Stable 5V DC output Maximum output current of 180mA Maximum power output of 0.9W Compact and lightweight design Efficient solar energy conversion Weather-resistant construction Pre-drilled mounting holes Easy integration into DIY projects Eco-friendly renewable energy source Maintenance-free operation Suitable for educational and hobby applications 📋 Technical Specifications Product Type: Mini Solar Panel Cell Module Panel Dimensions: 107 × 61 mm Cell Type: Polycrystalline Silicon Maximum Power Output: 0.9W Output Voltage: 5V DC Maximum Output Current: 180mA Conversion Efficiency: Approx. 17% Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +85°C Construction: Waterproof, Weather-Resistant Mounting: Pre-Drilled Mounting Holes Material: High-Quality Polycrystalline Silicon Weight: Approx. 16g 🔧 Applications Suitable for: DIY Solar Projects Solar Battery Chargers Mobile Charging Projects Arduino Projects ESP32 Projects Raspberry Pi Accessories Robotics IoT Devices Solar Garden Lights Educational Science Experiments Portable Electronics Renewable Energy Demonstrations Emergency Backup Projects Small DC Power Applications 📦 Package Includes 1 × 107 × 61mm 5V 180mA Mini Solar Panel Cell Module ⚠️ Note Output voltage and current depend on sunlight intensity, panel angle, and environmental conditions. For battery charging applications, use a suitable charge controller or charging module. Designed for low-power electronic projects and educational use. Product appearance and dimensions may vary slightly depending on the manufacturing batch.
5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal
[Power Connector] 🔌 5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal (Male / Female) Standard DC Barrel Connector • 2-Pin Screw Terminal • Solder-Free Installation • Up to 5A Current Rating The 5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal is a convenient and reliable connector designed for quick and secure DC power connections without soldering. Compatible with the industry-standard 5.5mm outer diameter and 2.1mm inner diameter barrel connector, it is widely used in CCTV camera installations, LED lighting, routers, power adapters, and DIY electronics projects. Available in Male and Female variants, this connector features a 2-pin screw terminal that allows wires to be connected easily using a screwdriver. The clearly marked positive (+) and negative (–) terminals help prevent wiring errors, making installation simple for both professionals and hobbyists. Manufactured with a durable ABS plastic housing and nickel-plated metal contacts, this connector provides reliable electrical performance, corrosion resistance, and long service life. Its reusable design makes it ideal for prototyping, repairs, and permanent installations. ⭐ Features Standard 5.5 × 2.1mm DC barrel connector Available in Male and Female versions 2-pin screw terminal for quick wire connection No soldering required Clearly marked positive (+) and negative (–) terminals Supports up to 5A current Durable ABS plastic housing Nickel-plated contacts for improved conductivity Secure and reusable connection Easy plug-and-play installation Suitable for 12V and 24V DC systems Ideal for DIY electronics and repair work 📋 Technical Specifications Product Type: DC Power Jack Plug with Screw Terminal Connector Type: Male / Female Barrel Size: 5.5mm (Outer) × 2.1mm (Inner) Terminal Type: 2-Pin Screw Terminal Rated Voltage: 0–30V DC Recommended Operating Voltage: 12V / 24V DC Maximum Current: Up to 5A Housing Material: ABS Plastic Contact Material: Nickel-Plated Metal Mounting Type: Inline Cable Mount Wire Compatibility: Up to 22 AWG Polarity Marking: Positive (+) / Negative (–) Operating Temperature: -20°C to +80°C 🔧 Applications Suitable for: CCTV Camera Power Connections LED Strip Lighting LED Sign Boards DC Power Adapters Routers and Modems Arduino Projects Raspberry Pi Projects DIY Electronics Battery Packs Power Distribution Systems Industrial Control Equipment Testing and Prototyping Electronic Repairs Low-Voltage DC Power Systems 📦 Package Includes 1 × 5.5 × 2.1mm DC Power Jack Plug with 2-Pin Screw Terminal (Male or Female variant as selected) ⚠️ Note Please select the required Male or Female connector variant before ordering. Verify polarity before connecting power to avoid damage to connected devices. Suitable for low-voltage DC applications only. Product appearance may vary slightly depending on the manufacturing batch.
110 × 69mm 5V 180mA Mini Solar Panel Cell Module
[Solar Panel] ☀️ 110 × 69mm 5V 180mA Mini Solar Panel Cell Module (0.9W) 5V Output • 180mA Current • 0.9W Power • Polycrystalline Solar Cell • Compact & Lightweight The 110 × 69mm 5V 180mA Mini Solar Panel Cell Module is a compact and efficient photovoltaic module designed to convert sunlight into clean, renewable electrical energy. Delivering a stable 5V output with a maximum current of 180mA, this solar panel is ideal for powering low-power electronic devices, DIY solar projects, battery charging applications, and educational experiments. Built using high-quality polycrystalline silicon solar cells, the module offers efficient energy conversion while maintaining reliable performance under sunlight. Its lightweight construction and compact dimensions make it easy to integrate into portable devices, robotics projects, solar-powered gadgets, and outdoor applications. Designed for durability, the panel features a weather-resistant construction suitable for outdoor use. With pre-drilled mounting holes, installation is quick and convenient for a wide range of renewable energy projects. ⭐ Features High-efficiency polycrystalline solar panel Stable 5V DC output Maximum output current of 180mA Maximum power output of 0.9W Compact size for portable projects Lightweight and easy to install Weather-resistant construction Pre-drilled mounting holes Suitable for outdoor applications Eco-friendly renewable energy source No external power source required Ideal for educational and DIY projects 📋 Technical Specifications Product Type: Mini Solar Panel Cell Module Cell Type: Polycrystalline Silicon Maximum Power Output: 0.9W Output Voltage: 5V DC Maximum Output Current: 180mA Panel Dimensions: 110 × 69 mm Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +85°C Construction: Weather-Resistant Connector: None (Solder Wire Connection) Weight: Approximately 15g 🔧 Applications Suitable for: DIY Solar Projects Solar Battery Chargers Mobile Phone Charging Projects Arduino Projects ESP32 & ESP8266 Projects Raspberry Pi Accessories Robotics Projects Solar Garden Lights Educational Science Experiments IoT Devices Portable Electronic Devices Renewable Energy Demonstrations Emergency Backup Power Projects Small DC Loads 📦 Package Includes 1 × 110 × 69mm 5V 180mA Mini Solar Panel Cell Module ⚠️ Note Output voltage and current depend on sunlight intensity and panel orientation. For battery charging applications, use a suitable solar charge controller or charging module. This panel is intended for low-power applications and may not provide sufficient power under low-light conditions. Product appearance may vary slightly depending on the manufacturing batch.
XH-M401 DC-DC Step Down Buck Converter Power Supply Module XL4016E1
[Step Down Buck Converter] ⚡ XL4016 12A DC-DC Step-Down Buck Converter Module Adjustable Power Supply 12A High Current • Adjustable Output • Up to 96% Efficiency • Ideal for Battery Charging & Power Supply Applications The XL4016 DC-DC Step-Down Buck Converter Module is a high-performance switching voltage regulator designed to efficiently convert higher DC input voltages into a stable, adjustable lower output voltage. Based on the XL4016 PWM Buck Converter IC, this module supports input voltages from 8V to 36V DC and provides an adjustable output voltage from 1.25V to 32V, making it suitable for a wide range of power supply applications. Capable of delivering up to 12A output current with conversion efficiencies of up to 96%, the module features built-in thermal shutdown, current limiting, and short-circuit protection for safe and reliable operation. Its compact design and excellent voltage regulation make it ideal for powering electronic projects, battery charging systems, LED lighting, industrial equipment, communication devices, and laboratory power supplies. ⭐ Features Based on the XL4016 high-performance buck converter IC Wide input voltage range of 8V–36V DC Adjustable output voltage from 1.25V–32V DC Supports output current up to 12A High conversion efficiency up to 96% Built-in thermal shutdown protection Built-in over-current protection Built-in output short-circuit protection Excellent line and load regulation Compact PCB design Suitable for battery charging and DC power applications 📋 Technical Specifications Product Type: DC-DC Buck Converter Module Model: XL4016 (XH-M401 / HW-439 / HW-674) Converter Type: Step-Down (Buck) Input Voltage: 8V–36V DC Output Voltage: 1.25V–32V DC (Adjustable) Maximum Output Current: 12A Maximum Conversion Efficiency: Up to 96% Load Regulation: ±0.5% Voltage Regulation: ±0.5% Switching Frequency: 180kHz Protection Features: Over-Current Protection Thermal Shutdown Protection Output Short-Circuit Protection PCB Size: 60 × 40 mm Operating Principle: PWM Step-Down Regulation 🔧 Applications Suitable for: Adjustable DC Power Supplies Lithium Battery Charging Lead Acid Battery Charging Solar Power Systems LED Drivers LCD Monitors LCD Televisions Portable Instruments Telecommunication Equipment Networking Equipment Robotics Projects Arduino Projects ESP32 Projects Industrial Automation DIY Electronics 📦 Package Includes 1 × XL4016 12A DC-DC Step-Down Buck Converter Module ⚠️ Note This is a step-down (buck) converter; the input voltage must always be higher than the required output voltage. Adjust the output voltage before connecting sensitive electronic devices. Product may be supplied as XH-M401, HW-439, or HW-674, depending on stock availability. All variants offer equivalent functionality.
5V 100mA 0.5W Mini Solar Panel 70x70mm Polycrystalline DIY Solar Cell Charger
[Solar Panel] The 5V 100mA 0.5W Mini Solar Panel is a compact and efficient photovoltaic module designed for small solar power applications and DIY renewable energy projects. Made using high-quality polycrystalline silicon, this solar panel converts sunlight into usable electrical energy with reliable performance. In addition, the panel delivers a stable 5V output with up to 100mA current, making it suitable for charging small batteries, powering low-power devices, and educational electronics projects. As a result, it is widely used in portable solar applications, science experiments, and DIY electronic systems. Because of its lightweight and compact design, the panel can be easily installed in limited spaces. Furthermore, the durable epoxy surface improves protection against moisture and environmental conditions, helping ensure long-term outdoor use. The solar panel features excellent low-light performance and high conversion efficiency for improved energy generation. Moreover, the exposed copper connection pads allow easy soldering and quick integration into custom electronic projects. This mini photovoltaic panel is commonly used in solar DIY kits, battery chargers, garden lighting, educational projects, portable electronics, and renewable energy systems. 🔹 Key Features High-efficiency polycrystalline solar panel Stable 5V output voltage Lightweight and compact design Excellent low-light performance Durable epoxy-coated surface Easy soldering connection pads Waterproof and long-lasting structure Suitable for DIY and educational projects 🔹 Technical Specifications Product Type: Mini Solar Panel Material: Polycrystalline Silicon Output Voltage: 5V Output Current: 0–100mA Rated Power: 0.5W Dimensions: 70mm × 70mm × 3mm Surface Type: Epoxy Coated Connection Type: Copper Tape Pads Application Type: Solar Charging / DIY Projects 🔹 Applications This mini solar panel is suitable for many applications, including: DIY solar projects Small battery charging Educational electronics kits Portable solar devices Garden lighting systems Renewable energy experiments Low-power electronics projects 🔹 Package Includes 1 × 5V 100mA 0.5W Mini Epoxy Solar Panel
Battery Voltage Wire 7/36 Black & Red 1 Meter – Flexible Copper Hook-Up Wire (Pair)
[Hook up wire] The Battery Voltage Wire 7/36 Black & Red is a high-quality flexible hook-up wire specially designed for battery connections, low-voltage power lines, and electronic circuits. Made with 7 strands of 36-gauge copper, this wire provides excellent conductivity, durability, and flexibility for easy routing in compact spaces. The wire comes in red and black insulation, making it perfect for identifying positive and negative terminals in battery packs, power supplies, inverters, chargers, and DIY electronics projects. With strong PVC insulation and fine stranded copper core, this wire is suitable for low-current DC applications, hobby electronics, Arduino projects, robotics, and general internal wiring. 🔹 Key Features High-quality 7/36 stranded copper conductor Red & Black color for easy polarity identification Highly flexible and easy to bend and route Low resistance for stable voltage transmission Durable PVC insulation for long life Ideal for low-voltage and low-current applications Suitable for DIY electronics, battery packs, and repair work 🔹 Technical Specifications Wire Type: Hook-up / Battery Voltage Wire Conductor Size: 7 / 36 (7 strands of 36 AWG) Material: Pure copper stranded core Insulation: PVC Color: Red & Black Rated Voltage: Up to 300V (typical) Current Rating: Low current applications Flexibility: High Application Type: DC wiring, battery leads, signal & power lines 🔹 Applications Battery pack connections Arduino and microcontroller projects Power supply wiring Robotics and automation Inverter and charger wiring (low current) DIY electronics and prototyping Repair and internal equipment wiring 🔹 Package Contents 1 × Red 7/36 Battery Wire 1 × Black 7/36 Battery Wire
7S 20A BMS for 18650 Lithium-Ion Battery Pack – Protection Board with Connector
[Lithium Battery Protection Board] The BMS NMC 7S 20A Same Port is an advanced Battery Management System designed for high-performance 25.9V lithium NMC battery packs. Engineered with integrated protection features and a compact PCB layout, this BMS offers robust electrical safety while minimizing design complexity with its single port for both charging and discharging. This Data sheet is for Lichtronics 7S 20A NMC PCM/BMS Charging Voltage -DC:29.4-30V CC/CV Max continuous charging current – 20A Over charge detection voltage – 4.25±0.05V Over discharge detection voltage – 2.8±0.08V Over current detection current – 40A Operating Temperature -45°C –+65°C Storage Temperature -45°C — +85°C Product Data Sheet Key Features Same Port Design: Combines charging and discharging through a single port for streamlined connections. 20A Continuous Discharge: Supports mid-range power devices with stable performance. Multiple Safety Protections: Overcharge Protection Over-discharge Protection Overcurrent & Short Circuit Cut-off Temperature Detection Passive Balancing: Ensures equal charge across cells for longer battery life. Compact and Lightweight Design: Ideal for tight enclosures or portable builds. Connector Included: Easily connect to standard 7S battery configurations. Technical Specifications Specification Details Battery Chemistry Lithium NMC (3.7V/cell) Configuration 7S (7 Cells in Series) Nominal Voltage 25.9V Charge Cut-off Voltage 29.4V (4.2V per cell) Discharge Cut-off ~17.5V (2.5V per cell) Max Continuous Current 20A Port Type Same port for charge/discharge PCB Size Compact footprint Balance Current 30-60 mA Applications Electric Bikes & Scooters Solar Lighting & Backup Power Portable DIY Power Systems Battery Replacements & Packs Energy Storage & IoT Solutions The PCM NMC 07S/20A SAME PORT (SLCT) is a Protection Circuit Module (PCM) designed for lithium nickel manganese cobalt (NMC) battery packs configured in a 7-series (07S) setup. This module provides overcharge, over-discharge, overcurrent, and short-circuit protection to safeguard the battery and enhance its lifespan. It is rated for a maximum continuous current of 20A, allowing higher current flow for larger applications. The "SAME PORT" feature suggests that both charging and discharging can occur through the same port, simplifying the battery management system. The "SLCT" (selectable) feature likely refers to adjustable settings for specific battery configurations or protections. 📦 Package Includes 1 × 7S 20A BMS Protection Board (with connector)
Single Shaft BO Motor 100 RPM
[Gear Motor] 100 RPM Single Shaft BO Motor – Straight Shaft The 100 RPM Single Shaft BO Motor is a lightweight and cost-effective solution designed for DIY robotics, small automation systems, and educational projects. Offering an excellent balance between torque and speed at low operating voltages, this motor is ideal for small to medium-sized robots. With its compact and durable construction, the motor features pre-drilled mounting holes for easy installation and perfectly pairs with 69mm robot wheels, making it an excellent choice for 2WD mobile robot platforms. Its low noise, low power consumption, and reliable torque output make it a favorite among hobbyists, students, and developers. Specifications: Shaft Length: 7mm Shaft Diameter: 5.5mm Motor Size: 55 × 48 × 23mm Voltage Range: 3V – 12V DC No-load Current: 40 – 180mA Speed: 100 RPM @ 6V Torque: 0.35 kg-cm Key Features: Lightweight and compact design Cost-effective with injection-molded housing Resilient, shock-absorbing construction Low power consumption and minimal maintenance Quiet operation with reduced friction Corrosion-resistant for long life Easy mounting with pre-drilled holes Ideal For: DIY robotics and automation projects Line follower and obstacle-avoiding robots Educational robotics kits Small mechanical prototypes Package Includes: 1 × 100 RPM Single Shaft BO Motor (Straight Shaft)
Out of stockZB2L3 18650 Li-ion Lithium Lead-acid Battery Capacity Meter Discharge Tester Analyzer
[Battery Capacity Tester] Description: Material: Electrical components Color: See pictures ZB2L3 battery capacity tester discharge type 1.2-12V external load capacity of the battery and other tests 18650 Tools, single-function, by controlling the load off and get real-time integrated discharge current capacity results Maximum support 15V 3A discharged through the discharge voltage and current, itself does not discharge Maximum capacity statistics support 9999Ah (9999000mAh) Automatically identifying and developing appropriate battery termination voltage can also be manually adjusted Specifications: Power supply voltage: DC4.5-6V (micro USB connector) Operating Current: less than 70mA Discharge voltage: 1.00V-15.00V 0.01V resolution Termination voltage range: 0.5-11.0V Supported by current: 3.000A 0.001A resolution Maximum voltage measurement error: 1% + 0.02V Maximum current measurement error: 1.5% + – 0.008A Maximum battery capacity range: 9999Ah (1Ah = 1000mAh) greater value by shifting the decimal point to switch, when the display is less than 10Ah X.XXX, as shown above to achieve 10Ah XX.XX, and so on. Board size: 50mmX37mm Finished Size: 50mmX37mmX17mm (length X width X height maximum position size, contains copper foot height) Instructions: 1. The first test should be a fully charged battery. 2. Connect the battery to be tested positive to positive input, a negative input to the negative, can not be reversed (with load reversal may damage the circuit)! Load connected to the output of the positive and negative output, to work through the tester micro USB power supply (not available desktop or laptop USB powered), then the battery voltage. 3. Direct start test need only one press of the “OK” button, the tester can automatically develop an appropriate termination voltage of the battery full charge voltage, and will start flashing after the test three times. Need to develop artificial termination voltage only when the battery voltage display state by pressing “+” or “-” buttons to modify the termination voltage display beginning with P, behind the representative voltage resolution 0.1V, set up after pressing the “OK “start testing. 4. After the start of the test the tester will control the load of the electronic switch is turned on, the test data shows that the process will release capacity (Ah), current discharge current (A) and battery voltage (V) between the wheel was. When the battery voltage reaches the set cut-off voltage, load control switches off the tester display data stays in capacity (Ah) and above and the corresponding indicator flashes quickly together, now displays the actual capacity of the battery is discharging capacity, about the press “OK” to terminate flashing allows stable data display, press again “OK” button to return to the power-on state can just replace the battery test the next section …… Error codes and their meanings: Err1: battery voltage is above 15V Err2: battery voltage is lower than the termination voltage Err3: Battery can not afford to load or discharge current line too much resistance Err4: overcurrent (current exceeds 3.1A) Err5:Improper use or incorrect wiring has caused the device to be burned out and cannot be used (current sampling or control switch MOS burned out). Note: Use the resistance of the discharge process, resistive load will seriously heat, please pay attention to safety! This circuit voltage in order to improve the measurement accuracy, specially designed DC bias, when the terminal displays nothing then a small voltage does not affect the actual measurement, if you are shorting the input terminals (absolute 0V) will show 0 No retail package Quantity:1Pc Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!! Package Content: 1Pc x battery capacity tester 2Pc x Load resistor Power Battery Capacity Tester LED Display Micro USB Li-ion Lithium 18650 External Load Battery Discharge Testing Analyzer
IC 7812 TO-220 12V Linear Voltage Regulator ST (L78M12CV/L7812CV/LM7812)
[Voltage Regulator IC] LM7812 12V Linear Voltage Regulator IC 7812 The L78M12CV is a three-terminal positive Voltage Regulator with several fixed output voltages, making it useful in a wide range of applications. This regulator can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each type employs internal current limiting, thermal shutdown and safe area protection, resulting it essentially indestructible. If adequate heat sinking is provided, they can deliver over 0.5A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltage and currents. Features- Thermal Overload Protection Short-circuit Protection Output Transition SOA Protection 4% Output Voltage Tolerance Guaranteed in Extended Temperature Range Applications: Power Management