All products · 8 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
ESP32-C3 Super Mini Development Board With Headers Pins
[ESP Modules] Ultra Compact • Wi-Fi & BLE 5.0 • USB Type-C • Perfect for IoT & Embedded Projects The ESP32-C3 Super Mini Development Board is a compact, feature-rich development board built around the powerful ESP32-C3 SoC from Espressif. Powered by a 32-bit RISC-V single-core processor running at up to 160MHz, it combines 2.4GHz Wi-Fi, Bluetooth 5.0 Low Energy (BLE), and low-power operation in an ultra-small form factor. Designed for IoT, smart home, wireless communication, automation, and embedded system development, the ESP32-C3 Super Mini offers 4MB Flash memory, 400KB SRAM, multiple GPIOs, ADC, PWM, UART, SPI, and I2C interfaces for connecting sensors, displays, relays, and other peripherals. The onboard USB Type-C interface simplifies programming and power supply, while the built-in USB-to-Serial functionality enables quick firmware uploading without requiring additional programmers. Fully compatible with Arduino IDE, ESP-IDF, PlatformIO, and MicroPython, it is suitable for beginners, students, makers, and professional developers. Its ultra-compact breadboard-friendly design makes it ideal for portable and space-constrained projects where performance, wireless connectivity, and energy efficiency are essential. Note: Programming, software configuration, driver installation, firmware flashing, and coding-related issues are not covered under return or replacement. Users are expected to troubleshoot software-related issues independently. ⭐ Features Powerful ESP32-C3 32-bit RISC-V processor CPU frequency up to 160MHz Built-in 2.4GHz Wi-Fi (802.11 b/g/n) Integrated Bluetooth 5.0 Low Energy (BLE) Ultra-compact Super Mini design Breadboard-friendly layout USB Type-C interface for programming and power 4MB onboard Flash memory 400KB SRAM Multiple GPIO, ADC, PWM, UART, SPI & I2C interfaces Low power consumption with Deep Sleep mode Onboard programmable LED Compatible with Arduino IDE, ESP-IDF, PlatformIO & MicroPython Ideal for IoT, automation, robotics, and wireless applications 📋 Technical Specifications Product Type: Development Board Board Model: ESP32-C3 Super Mini Microcontroller: ESP32-C3 Processor Architecture: 32-bit RISC-V CPU Frequency: Up to 160MHz Core: Single Core Flash Memory: 4MB SRAM: 400KB Wi-Fi Standard: IEEE 802.11 b/g/n (2.4GHz) Bluetooth: Bluetooth 5.0 Low Energy (BLE) Operating Voltage: 3.3V Input Voltage: 5V via USB Type-C or 3.3V External USB Interface: USB Type-C GPIO: Multiple Digital GPIO Pins Analog Input: Up to 6 ADC Channels PWM: Supported UART: Supported SPI: Supported I2C: Supported USB-to-Serial: Onboard Onboard LED: User Programmable (GPIO8) Power Consumption: Ultra Low (Deep Sleep ≈ 43µA) Dimensions: Approx. 22.5 × 18 mm Headers: Pre-Soldered 🔧 Applications Suitable for: Internet of Things (IoT) Smart Home Automation Wireless Sensor Networks Home Automation Systems Bluetooth Low Energy Devices Wi-Fi Enabled Controllers Robotics Projects Data Logging Systems Remote Monitoring Industrial Automation Portable Embedded Devices Educational Learning DIY Electronics Projects Wearable Electronics Rapid Prototyping 📦 Package Includes 1 × ESP32-C3 Super Mini Development Board Pin Headers ⚠️ Note Programming, firmware installation, software configuration, and driver-related issues are not covered under warranty, return, or replacement. Please verify board compatibility and install the appropriate development environment before programming. Soldered and non-soldered header pin depend on stock
ESP32 38-Pin Development Board – IoT Microcontroller with WiFi & Bluetooth
[ESP Modules] Description The ESP32 38-Pin Development Board is a versatile and cost-effective microcontroller platform perfect for a wide range of IoT, automation, and wireless communication projects. Powered by the ESP32 SoC, this board offers integrated WiFi and Bluetooth (BLE) capabilities, making it ideal for developing smart home devices, industrial control systems, robotics, and DIY electronics. For the best IoT experience, you can pair this board with our LoRa SX1278 Module for long-range communication or integrate it with our 0.96-inch OLED Display for real-time data display. Need reliable power control? Combine it with our 2-Channel Relay Module with Optocoupler for safe switching of external devices. Compatible with popular platforms like Arduino IDE, MicroPython, and PlatformIO, this ESP32 board is user-friendly for both beginners and professionals. The board features 38 GPIO pins, enabling you to connect a variety of sensors, actuators, and other peripherals—available in our IoT Components category. Key Features: ESP32 Dual-Core 32-bit LX6 Processor Built-in 2.4 GHz WiFi and Bluetooth 4.2 (BLE) 38 GPIO Pins supporting multiple digital and analog functions Interfaces: UART, SPI, I2C, PWM, ADC, DAC Ultra-low power operation modes ideal for battery-powered IoT devices Supports Arduino IDE, MicroPython, and other environments Onboard micro-USB connector for easy power and programming Reset and boot buttons for firmware flashing Breadboard-friendly form factor Applications: IoT development projects Smart home automation – compatible with Vihaan IoT Gateway Solutions Wireless data logging systems Robotics and drone controllers Industrial monitoring devices Sensor networks – connect with our DHT11/DHT22 Temperature Sensors Specifications: Chipset: ESP32 (Generic) Operating Voltage: 3.3V (5V tolerant inputs) Flash Memory: 4MB Connectivity: WiFi IEEE 802.11 b/g/n, Bluetooth 4.2 BLE Interfaces: GPIO, UART, SPI, I2C, ADC, DAC, PWM USB Interface: Micro USB Form Factor: 38-Pin, breadboard compatible Package Includes: 1 x ESP32 38-Pin Generic Development Board
Out of stockZB2L3 18650 Li-ion Lithium Lead-acid Battery Capacity Meter Discharge Tester Analyzer
[Battery Capacity Tester] Description: Material: Electrical components Color: See pictures ZB2L3 battery capacity tester discharge type 1.2-12V external load capacity of the battery and other tests 18650 Tools, single-function, by controlling the load off and get real-time integrated discharge current capacity results Maximum support 15V 3A discharged through the discharge voltage and current, itself does not discharge Maximum capacity statistics support 9999Ah (9999000mAh) Automatically identifying and developing appropriate battery termination voltage can also be manually adjusted Specifications: Power supply voltage: DC4.5-6V (micro USB connector) Operating Current: less than 70mA Discharge voltage: 1.00V-15.00V 0.01V resolution Termination voltage range: 0.5-11.0V Supported by current: 3.000A 0.001A resolution Maximum voltage measurement error: 1% + 0.02V Maximum current measurement error: 1.5% + – 0.008A Maximum battery capacity range: 9999Ah (1Ah = 1000mAh) greater value by shifting the decimal point to switch, when the display is less than 10Ah X.XXX, as shown above to achieve 10Ah XX.XX, and so on. Board size: 50mmX37mm Finished Size: 50mmX37mmX17mm (length X width X height maximum position size, contains copper foot height) Instructions: 1. The first test should be a fully charged battery. 2. Connect the battery to be tested positive to positive input, a negative input to the negative, can not be reversed (with load reversal may damage the circuit)! Load connected to the output of the positive and negative output, to work through the tester micro USB power supply (not available desktop or laptop USB powered), then the battery voltage. 3. Direct start test need only one press of the “OK” button, the tester can automatically develop an appropriate termination voltage of the battery full charge voltage, and will start flashing after the test three times. Need to develop artificial termination voltage only when the battery voltage display state by pressing “+” or “-” buttons to modify the termination voltage display beginning with P, behind the representative voltage resolution 0.1V, set up after pressing the “OK “start testing. 4. After the start of the test the tester will control the load of the electronic switch is turned on, the test data shows that the process will release capacity (Ah), current discharge current (A) and battery voltage (V) between the wheel was. When the battery voltage reaches the set cut-off voltage, load control switches off the tester display data stays in capacity (Ah) and above and the corresponding indicator flashes quickly together, now displays the actual capacity of the battery is discharging capacity, about the press “OK” to terminate flashing allows stable data display, press again “OK” button to return to the power-on state can just replace the battery test the next section …… Error codes and their meanings: Err1: battery voltage is above 15V Err2: battery voltage is lower than the termination voltage Err3: Battery can not afford to load or discharge current line too much resistance Err4: overcurrent (current exceeds 3.1A) Err5:Improper use or incorrect wiring has caused the device to be burned out and cannot be used (current sampling or control switch MOS burned out). Note: Use the resistance of the discharge process, resistive load will seriously heat, please pay attention to safety! This circuit voltage in order to improve the measurement accuracy, specially designed DC bias, when the terminal displays nothing then a small voltage does not affect the actual measurement, if you are shorting the input terminals (absolute 0V) will show 0 No retail package Quantity:1Pc Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!! Package Content: 1Pc x battery capacity tester 2Pc x Load resistor Power Battery Capacity Tester LED Display Micro USB Li-ion Lithium 18650 External Load Battery Discharge Testing Analyzer
MH-M18 Wireless Bluetooth Audio Receiver Board Module BLT 4.2 MP3 Lossless Decode
[Audio Receiver] MH-M18 Wireless Bluetooth Audio Receiver Board Module – Bluetooth 4.2 MP3 Lossless Decoder The MH-M18 Wireless Bluetooth Audio Receiver Module is a compact, low-power Bluetooth 4.2 audio receiver designed to add wireless audio functionality to existing speakers, amplifiers, DIY audio systems and other projects. It supports stereo two-channel audio output and lossless decoding of WAV, WMA, FLAC, APE and MP3 formats. The module can operate from 3.7–5V and provides a transmission range of up to 20 meters under suitable conditions. ⭐ Key Features Bluetooth 4.2 wireless audio receiver Converts conventional speakers/amplifiers into Bluetooth-enabled audio systems Supports stereo dual-channel audio output Supports WAV/WMA/FLAC/APE/MP3 audio decoding Bluetooth automatic connection support Maximum transmission distance up to 20 meters in open/low-interference conditions Low power consumption Can be powered from a 3.7–4.2V lithium battery or 5V supply Compact PCB suitable for DIY projects Supports Bluetooth audio protocols including HFP, A2DP and AVRCP 📋 Technical Specifications Model: MH-M18 Bluetooth Version: Bluetooth 4.2 Operating Voltage: DC 3.7–5V Maximum Operating Current: Approximately 20mA Current in Deep Sleep: Approximately 3µA Transmission Distance: Up to 20 meters Sensitivity: -87dBm Operating Temperature: -40°C to +85°C Audio Output: Stereo, dual channel Supported Formats: WAV, WMA, FLAC, APE, MP3 Bluetooth Protocols: HFP V1.7, A2DP V1.2, AVRCP V1.5, AVCTP V1.2, AVDTP V1.2 Approx. Module Size: 23 × 16mm; some listings specify approximately 23 × 16.5 × 3mm depending on version. 🔧 Applications Convert old speakers into Bluetooth speakers DIY Bluetooth speaker projects DIY audio amplifiers Portable speaker projects Home audio systems Car audio Bluetooth upgrades Wireless audio receiver projects Custom audio and electronics projects 🛠️ Basic Connection VCC: Power input GND: Ground L: Left audio output R: Right audio output Connect the L/R audio outputs to an external amplifier. This module is an audio receiver/decoder and should not be treated as a high-power speaker amplifier. 💡 Bluetooth Indicator Fast flashing: Bluetooth not connected Steady light: Bluetooth connected Slow flashing: Bluetooth audio playback in some versions ⚠️ Important Notes Do not supply more than the specified operating voltage. For lithium-battery operation, use a suitable 3.7–4.2V supply. The maximum 20m transmission distance depends on obstacles, interference and the connected Bluetooth device. This is a Bluetooth audio receiver module, not a power amplifier. Audio output should be connected to a suitable amplifier input. IC Variant Note: This product may be supplied with different compatible IC variants, including MH-M18 or JL AS208PO1429-25C4. Functionality is specified as equivalent for this product, and the variant will be shipped randomly depending on stock. 📦 Package Includes 1 × MH-M18 Wireless Bluetooth Audio Receiver Board Module
XH-W3001 AC 220V 1500W Digital Microcomputer Thermostat Switch
[Temperature Sensor] This is XH-W3001 AC 220V 1500W Digital Temperature Controller Microcomputer Thermostat Switch. A temperature measurement and Controller tool with high accuracy and precision at a very low cost. It offers a high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 110℃. The LED display shows the results clearly. One can directly install or embed the XH-W3001 in industrial control equipment panel, convenient and quick. It features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmental protective. Button functions: Press UP to show the start temperature button. On Long press of the UP button, the display starts flashing, then press the UP or DOWN button Set the beginning of the temperature value Press Down the display button to stop temperature. On the Long press of the Down button, the display starts flashing, then press the Up or Down button Set to stop the temperature value. Features: Easy to install Output type: AC Output (AC 220V 1500W). Output capacity: MAX 10A temperature measurement, display; refrigeration, heating control Temperature setting upper and lower limits Simple operation, suitable for seafood machines. Upper key: The start temperature is displayed in one press, and long press to set start temperature. Lower key: The stop temperature is displayed in one press, and long press to set stop temperature. Package Includes: 1 x XH-W3001 AC 220V 1500W Digital Microcomputer Thermostat Switch.
Red/White Led 5mm 2 Pin Auto Flashing
[DIP LED] These is the very common Two Color Auto Flashing LEDs which is used in all types of electronic projects. These Light Emitting Diodes feature a 5mm diameter head, 2 pin terminal for a reliable connection. It can give out the chosen color light when powered on. Ideal for color displays, indicators, diagnostic or analytical equipment and etc. Colour:- Super Bright Two-Colour Outer Diameter: 5mm Round Current: 20mA, Color Red, Greed Polarity: Anode (Longer Part) | Cathode (Shorter Part) It is great for electronic and electrical experiments Auto Flashing Red, Green LED VF- 3.20 – 3.40V
RGB Led 5mm 2 Pin Auto Flashing
[DIP LED] These is the very common Tri Color Auto Flashing LEDs which is used in all types of electronic projects. These Light Emitting Diodes feature a 5mm diameter head, 2 pin terminal for a reliable connection. It can give out the chosen color light when powered on. Ideal for color displays, indicators, diagnostic or analytical equipment and etc. Colour:- Super Bright Tri-Colour Outer Diameter: 5mm Round Current: 20mA, Color R G B Polarity: Anode (Longer Part) | Cathode (Shorter Part) It is great for electronic and electrical experiments Auto Flashing RGB LED VF- 3.20 – 3.40V
Out of stockXH-W3001 DC 12V 120W Digital Microcomputer Thermostat Switch
[Temperature Sensor] XH W 3001 Thermostat DC 12 Volt 10 Amp Digital Temperature Controller Heating/Cooling Temperature Control Switch This is an XH-W3001 DC 12V 120W Digital Microcomputer Thermostat Switch. A temperature measurement and Controller tool with high accuracy and precision at the very low cost. It offers high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 110℃. It features a 1M probe made up of stainless steel material which makes is waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmental protective. BUTTON FUNCTIONS : Press UP to show start temperature button. On Long press of the UP button, the display starts Flashing, then press the UP or DOWN button Set the beginning of the temperature value Press Down the display button to stop temperature. On Long press of the Down button, the display starts Flashing, then press the UP or Down button Set to stop the temperature value. Features: Easy to install Output type: Direct Output Output capacity: MAX 10Aemperature measurement, display; refrigeration, heating control Temperature setting upper and lower limits Simple operation, suitable for seafood machines. Upper key: The start temperature is displayed in one press, and long press to set start temperature. Lower key: The stop temperature is displayed in one press, and long press to set stop temperature.