All products · 59 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Nextron Nforce AMD Radeon RX 580 8GB GDDR5 Graphics Card
[Graphics Card] Nextron Nforce AMD Radeon RX 580 8GB GDDR5 Dual Fan Gaming Graphics Card The Nextron Nforce RX 580 8GB delivers responsive, fluid 1080p gaming performance powered by AMD Polaris architecture. Equipped with 8GB of high-speed GDDR5 memory and a dual-fan thermal cooling solution with copper heat pipes. ⭐ Key Features - High-capacity 8GB GDDR5 video memory with 256-bit bus width - Dual 90mm cooling fans with multi-rib heat dissipation - Dual slot aerodynamic shroud design - AMD FreeSync technology support for tear-free gaming - DirectX 12 and Vulkan API hardware acceleration - Multiple display connectivity with HDMI, DisplayPort, and DVI-D 📋 Technical Specifications - GPU Engine: AMD Radeon RX 580 (Polaris 20) - Stream Processors: 2048 Cores - Core Clock: Up to 1284 MHz - Memory Clock: 7000 MHz effective - Memory Interface: 256-bit GDDR5 - Bus Type: PCI-Express 3.0 x16 - Video Outputs: 1x HDMI 2.0b, 3x DisplayPort 1.4, 1x Dual-Link DVI-D - Thermal Design Power (TDP): 150W - Power Connector: 1x 8-Pin PCIe - Recommended Power Supply: 450W minimum 🎯 Applications - Budget 1080p gaming (CS2, GTA V, Valorant, Apex Legends, Fortnite) - Multi-monitor workstation setups for trading and productivity - Affordable 3D rendering and graphic design rigs 📦 Package Includes - 1 x Nextron Nforce RX 580 8GB GDDR5 Graphics Card - 1 x Driver CD & Quick Installation Guide
Thermaltake CTE C750 TG ARGB Snow White E-ATX Full Tower Case
[PC Case] Thermaltake CTE C750 TG ARGB Snow White E-ATX Full Tower Case CTE (Centralized Thermal Efficiency) form factor case designed to provide high thermal efficiency to critical components. Motherboard is rotated 90 degrees, creating independent airflow paths for CPU and graphics cards. ⭐ Key Features - 90-degree rotated motherboard layout for chimney-effect vertical convection - Pre-installed with 3x 140mm CT140 ARGB fans in white - Dual 420mm AIO liquid cooler radiator support simultaneously - 4mm thick scratch-resistant tempered glass side panel 📋 Technical Specifications - Motherboard: Mini-ITX, Micro-ATX, ATX, E-ATX - Dimensions: 599.2 x 327 x 565.2 mm - Front I/O: 1x Type-C, 4x USB 3.0, Audio - Max GPU Length: 420mm 📦 Package Includes - 1 x Thermaltake CTE C750 TG ARGB Snow White Case - 3 x 140mm White ARGB Fans pre-installed
DHT11 Digital Temperature and Humidity Sensor Module 3.3V-5V for Arduino & Raspberry Pi
[Temperature Sensor] The DHT11 Digital Temperature and Humidity Sensor Module is a reliable and cost-effective sensor designed to measure ambient temperature and relative humidity. It combines a capacitive humidity sensing element and a thermistor with a built-in digital signal processing unit, providing calibrated digital output directly to microcontrollers. In addition, the DHT11 offers stable performance and excellent long-term reliability, making it suitable for environmental monitoring and automation applications. As a result, it is widely used in weather stations, smart home systems, greenhouse monitoring, HVAC systems, and educational electronics projects. Because the module includes the required pull-up resistor, interfacing with microcontrollers becomes simple and straightforward. Furthermore, only three connections are required: VCC, GND, and Data Output. The sensor operates from a wide voltage range of 3.3V to 5.5V DC, ensuring compatibility with Arduino, Raspberry Pi, ESP32, STM32, NodeMCU, and other development boards. Moreover, readily available libraries and example codes allow quick integration into projects. The DHT11 utilizes advanced digital signal acquisition technology and dedicated temperature-humidity sensing techniques to ensure accurate and dependable measurements. 🔹 Key Features Measures temperature and humidity simultaneously Calibrated digital signal output Low power consumption High reliability and long-term stability Capacitive humidity sensing technology Built-in pull-up resistor on module Compatible with Arduino, ESP32, Raspberry Pi, and STM32 Simple 3-wire interface Easy integration into IoT projects Compact and lightweight design 🔹 Technical Specifications Sensor Model: DHT11 Operating Voltage: 3.3V – 5.5V DC Output Type: Digital Serial Output Humidity Measurement Range: 20%RH – 90%RH Humidity Accuracy: ±5%RH Humidity Resolution: 1%RH Temperature Measurement Range: 0°C – 50°C Temperature Accuracy: ±2°C Temperature Resolution: 1°C Sampling Rate: 1Hz (One Reading Per Second) Long-Term Stability: < ±1%RH/Year Interchangeability: Fully Interchangeable Sensor Technology: Capacitive Humidity Sensor + Thermistor 🔹 Pin Configuration Pin 1 (VCC): 3.3V – 5.5V DC Power Supply Pin 2 (DATA): Digital Serial Data Output Pin 3 (GND): Ground 🔹 Applications This sensor module is suitable for: Arduino projects Raspberry Pi projects ESP32 projects IoT systems Weather monitoring stations Smart home automation Greenhouse monitoring HVAC control systems Environmental monitoring Educational electronics projects 🔹 Package Includes 1 × DHT11 Digital Temperature and Humidity Sensor Module
3W High Power White LED with Aluminum Heatsink – High Brightness Emitter Module
[LEDs] Upgrade your lighting projects with this 3 Watt High Power LED with Aluminum Heatsink, designed for excellent brightness and long-term reliability. The LED comes pre-mounted on a solid aluminum heatsink that efficiently dissipates heat, ensuring stable performance and extended lifespan. Perfect for DIY electronics, torch lights, spotlights, emergency lights, automotive lighting, and educational projects, this LED module delivers powerful illumination with low power consumption. Easy to install and compatible with standard constant-current LED drivers, this module is a reliable choice for both hobbyists and professionals. 🔹 Key Features High brightness 3W single-chip power LED Pre-mounted aluminum heatsink for effective cooling Long lifespan and stable light output Low power consumption, energy efficient Compact and easy-to-install design Ideal for DIY projects, flashlights, lamps, and experiments 🔹 Specifications Power: 3 Watt LED Type: High Power Single Chip Color : White Forward Voltage: 3.2V – 3.6V (typical) Current: 700mA (recommended constant current) Luminous Flux: ~180 – 240 Lumens (approx.) Heatsink Material: Aluminum Mount Type: Star PCB with attached heatsink Operating Life: Up to 50,000 hours 🔹 Package Includes 1 × 3W High Power LED with Aluminum Heatsink *Image shown is a representation only.
Out of stockWS2812B 144 LEDs/m RGB Addressable LED Pixel Strip Light 5V DC Programmable IP65 Waterproof
[RGB LED Strip] Product Description Illuminate your space with the 144 Addressable WS2812B LED Strip (5V, IP65 Waterproof) — a high-quality, vibrant, and flexible lighting solution designed for both indoor and outdoor applications.This LED strip delivers brilliant RGB colors and individually addressable LEDs, allowing you to create dynamic light effects and custom animations for any occasion. The IP65 waterproof rating ensures reliable performance even in dusty or humid environments, making it ideal for home decor, commercial lighting, events, and DIY projects.Its adhesive backing allows for quick installation on clean surfaces, making it a perfect choice for hobbyists, professionals, and decorators. With 144 LEDs per meter, this strip provides exceptional brightness, flexibility, and color control for artistic displays, mood lighting, or architectural highlights. Key Features 🌈 Addressable Design Each LED is individually controllable, allowing you to produce stunning lighting effects, animations, and color patterns. Perfect for creative lighting projects and synchronized displays. 💧 IP65 Waterproof Protection Built to withstand dust and light water exposure, this LED strip ensures long-lasting durability in both indoor and outdoor environments. 🔆 Vibrant RGB Colors Enjoy rich and vivid RGB color combinations — from bold, dynamic hues to soft ambient tones — to match any mood or theme. 🧩 Easy Installation The flexible strip comes with a strong adhesive backing. Simply peel and stick it to any clean, dry surface for quick setup without tools. ⚙️ Versatile Applications Ideal for home decoration, outdoor landscaping, parties, events, art installations, and signage. Its flexibility makes it suitable for various shapes and surfaces. Specifications Specification Description LED Type WS2812B LED Quantity 144 LEDs per meter Input Voltage 5V DC Waterproof Rating IP65 Control Method Individually Addressable Color RGB (Red, Green, Blue) Strip Length 1 Meter Power Consumption Depends on brightness and color settings Weight 150 g(Approx) Installation Adhesive backing Applications ✨ Enhance your outdoor landscape with vibrant, programmable lighting effects. 💡 Highlight indoor architectural elements or furniture with accent lighting. 🎉 Create dynamic effects for parties, weddings, or events to match the ambiance. 🎮 Upgrade your home theater or gaming setup with immersive backlighting. 🏢 Use in shops or signage displays for eye-catching illumination and visual impact. Package Includes 1 × WS2812B 144 LEDs/m RGB Addressable LED Pixel Strip Light 5V DC Programmable IP65 Waterproof
10S 20A Lithium-ion BMS 18650 Battery Charging Board
[Lithium Battery Protection Board] Overview of this 10S 20A BMS 18650 Battery Charging Board Introducing 10S 20A BMS 18650 Battery Charging Board at best price in India. This 10S 20A BMS provides comprehensive protection and efficient management for 18650 lithium batteries. It offers critical safeguards against overcharging, over-discharging, and short circuits, ensuring battery safety and longevity. Ideal for high-power applications, this 10S BMS for 18650 lithium battery delivers reliable performance and durability. With its 20A current rating, the 20A BMS for 18650 lithium battery charger board supports demanding energy systems. The advanced circuitry ensures optimal charging and discharging, reducing heat and extending battery life. Its robust design and high-performance capabilities make it suitable for both professional and DIY projects. Upgrade your battery management with this efficient and dependable 10S 20A BMS 18650 Battery Charging Board. Features 20A High Current Support: Handles up to 20A continuous current, suitable for high-power applications. Ensures reliable energy delivery for demanding devices and systems. 10S Configuration: Designed for 10 series lithium-ion cells, providing balanced charging and discharging. Maintains cell balance for improved performance and battery lifespan. Advanced Protection Features: Includes protection against overcharge, overdischarge, short-circuits, and overcurrent. Enhances safety and prevents damage to the battery pack. Efficient Heat Management: Built with components that ensure effective heat dissipation during operation. Prevents overheating and maintains consistent performance under load. Compact and Durable Design: This 10S 20A BMS 18650 battery charging board fits easily into various battery setups and projects. Its durable built ensure reliability and long life in diverse condition. Specification No. Tested Item Criterion 1 Voltage Charging Voltage DC:42V CC/CV Blance Volatage for single cell 4.1V 2 Current Blance Current for single cell 40 ± 20 mA Current consumption <= 30µA Max continuous charging current 20A Max continuous discharging current 20A 3 Over Charge Protection Over charge detection voltage 4.25 ± 0.03V Over charge detection delay time <1000ms Over charge release voltage 4.15 ± 0.05V 4 Over discharge detection voltage Over Discharge Protection 2.7 ± 0.08V Over discharge detection delay time 1400ms Over discharge release voltage 3±0.08V 5 Over Current Protection Over current detection current (discharging) 20A±3A Release condition Cut load Over current detection delay time <1300ms 6 Short Circuit Protection Detection condition (120A) Exterior short circuit Release condition Cut short circuit Short circuit detection delay time 300us 7 Temperature Protection Temperature Protection Charging 50°C Discharging 70°C 8 Interior Resistance Main loop electrify resistance VC=4.2V,RDS≤60mΩ 9 Temperature Operating Temperature -45°C –+65°C Storage Temperature -45°C+85°C Package Includes: 1 X 10S 20A BMS 18650 Battery Charging Board
Single Shaft BO Motor 100 RPM
[Gear Motor] 100 RPM Single Shaft BO Motor – Straight Shaft The 100 RPM Single Shaft BO Motor is a lightweight and cost-effective solution designed for DIY robotics, small automation systems, and educational projects. Offering an excellent balance between torque and speed at low operating voltages, this motor is ideal for small to medium-sized robots. With its compact and durable construction, the motor features pre-drilled mounting holes for easy installation and perfectly pairs with 69mm robot wheels, making it an excellent choice for 2WD mobile robot platforms. Its low noise, low power consumption, and reliable torque output make it a favorite among hobbyists, students, and developers. Specifications: Shaft Length: 7mm Shaft Diameter: 5.5mm Motor Size: 55 × 48 × 23mm Voltage Range: 3V – 12V DC No-load Current: 40 – 180mA Speed: 100 RPM @ 6V Torque: 0.35 kg-cm Key Features: Lightweight and compact design Cost-effective with injection-molded housing Resilient, shock-absorbing construction Low power consumption and minimal maintenance Quiet operation with reduced friction Corrosion-resistant for long life Easy mounting with pre-drilled holes Ideal For: DIY robotics and automation projects Line follower and obstacle-avoiding robots Educational robotics kits Small mechanical prototypes Package Includes: 1 × 100 RPM Single Shaft BO Motor (Straight Shaft)
Out of stockDC 12V Mini 370 Diaphragm Pump Self-Priming Suction Pressure Water Pump
[DC Water Pump] DC 12V mini 370 Self-Priming Water pump Introducing DC 12V Mini 370 Self-Priming Water Pump at best price in India with . Designed for durability and this DC 12V Mini 370 Diaphragm Pump offers consistent performance with self-priming capability & ensure smooth operation even at varying pressure. Compact and lightweight, this 12V 370 mini water pump is perfect for application like aquariums, small fountain, and portable water system. With its robust suction capabilities, this DC 12V Self-Priming Suction Pressure Water Pump ensure effective water flow in diverse setting. Its low power consumption and quiet operation make it perfect for both indoor and outdoor use. Built with high quality material, this pump is resistant to wear & ensure reliable performance over time. Feature Self-Priming Mechanism: This DC 12V mini 370 Self-Priming Water pump pump feature a self priming design for efficient water transfer. It ensure stable performance even with changing water level. Compact and Lightweight: Its small size and low weight make it easy to use in small space. Perfect for portable application need minimal space usage. High Suction Power: This water pump deliver strong suction power for quick and effective water movement. It can handle low pressure condition without loosing output efficiency. Durable Build Quality: This DC 12V Mini 370 Diaphragm Pump made from high quality material, this pump offer long lasting durability and performance. It resists wear and tear & ensure reliable operation over time. Versatile Application: It is also perfect for aquarium, small garden, and DIY water circulation project. The pump works effectively for a variety of home and industrial uses. Specification Specification Details Operating Voltage 12V DC Current Consumption 0.5A – 1A (depending on load) Flow Rate 1.5-2.5 liters per minute Maximum Pressure Up to 2.5 bar (36 PSI) Suction Lift Up to 2 meters Discharge Head Up to 3 meters Motor Type 370 brushed motor Self-Priming Yes, capable of dry priming Body Material High-quality plastic with corrosion resistance Port Diameter Inlet and outlet: 4mm Noise Level Low noise operation (<65 dB) Lifespan Over 1000 hours of continuous operation Applications Water transfer, small irrigation systems, DIY project Dimensions 24x61x24mm Weight 60g Package Includes: 1 x DC 12V Mini 370 Diaphragm Pump Self-Priming Suction Pressure Water Pump
ESP32 38-Pin Development Board – IoT Microcontroller with WiFi & Bluetooth
[ESP Modules] Description The ESP32 38-Pin Development Board is a versatile and cost-effective microcontroller platform perfect for a wide range of IoT, automation, and wireless communication projects. Powered by the ESP32 SoC, this board offers integrated WiFi and Bluetooth (BLE) capabilities, making it ideal for developing smart home devices, industrial control systems, robotics, and DIY electronics. For the best IoT experience, you can pair this board with our LoRa SX1278 Module for long-range communication or integrate it with our 0.96-inch OLED Display for real-time data display. Need reliable power control? Combine it with our 2-Channel Relay Module with Optocoupler for safe switching of external devices. Compatible with popular platforms like Arduino IDE, MicroPython, and PlatformIO, this ESP32 board is user-friendly for both beginners and professionals. The board features 38 GPIO pins, enabling you to connect a variety of sensors, actuators, and other peripherals—available in our IoT Components category. Key Features: ESP32 Dual-Core 32-bit LX6 Processor Built-in 2.4 GHz WiFi and Bluetooth 4.2 (BLE) 38 GPIO Pins supporting multiple digital and analog functions Interfaces: UART, SPI, I2C, PWM, ADC, DAC Ultra-low power operation modes ideal for battery-powered IoT devices Supports Arduino IDE, MicroPython, and other environments Onboard micro-USB connector for easy power and programming Reset and boot buttons for firmware flashing Breadboard-friendly form factor Applications: IoT development projects Smart home automation – compatible with Vihaan IoT Gateway Solutions Wireless data logging systems Robotics and drone controllers Industrial monitoring devices Sensor networks – connect with our DHT11/DHT22 Temperature Sensors Specifications: Chipset: ESP32 (Generic) Operating Voltage: 3.3V (5V tolerant inputs) Flash Memory: 4MB Connectivity: WiFi IEEE 802.11 b/g/n, Bluetooth 4.2 BLE Interfaces: GPIO, UART, SPI, I2C, ADC, DAC, PWM USB Interface: Micro USB Form Factor: 38-Pin, breadboard compatible Package Includes: 1 x ESP32 38-Pin Generic Development Board
Out of stockTDT 10S 20A NMC Battery Protection and Charger BMS with Balance Hardware
TDT BMS NMC 10S 20A WITH BALANCE Hardware Product Data Sheet The BMS NMC 10S 20A WITH BALANCE (TDT) is a robust and efficient Battery Management System designed for 10-series (10S) lithium-ion NMC battery packs. With a nominal system voltage of 37V and a continuous current capacity of 20A, this module ensures safe and stable operation of high-performance battery packs used in e-mobility, energy storage, and industrial tools. Technical Specifications Battery Chemistry: Lithium-ion (NMC) Configuration: 10S (10 cells in series) input Voltage B+ to B-: -0.3~+20V Overcharge Detection voltage/1CELL: 4.28±0.05V Over discharge Detection voltage/1CELL: 2.8±0.1V Over current: 4-6A Suggest working temperature: -20°C~+60°C Key Features 20A High Current Support Perfect for mid-to-high power battery packs used in electric bikes, scooters, power tools, and solar inverters. Built-in Balancing Function Automatically maintains uniform voltage across all cells to extend overall battery life. Comprehensive Protections Protects against overcharge, over-discharge, overcurrent, short circuit, and thermal runaway. Durable Aluminum Heat Sink Casing Helps dissipate heat effectively for stable thermal performance. Applications Electric Bicycles & Scooters (E-Bikes) Solar Battery Packs & Inverters DIY 10S Battery Pack Projects Cordless Industrial Tools Electric Wheelchairs & Mobility Carts The PCM NMC 10S 20A WITH BALANCE (TDT) is a Battery Protection Circuit Module (PCM) designed for 10 series Nickel Manganese Cobalt (NMC) battery packs, supporting a 20A continuous discharge current. This module is ideal for high-power applications such as energy storage systems, backup power solutions, and electric vehicles. It offers essential protection features, including overcharge, over-discharge, overcurrent, short circuit, and temperature protection, ensuring the safe operation of the battery. The WITH BALANCE feature ensures proper voltage balancing across the cells, optimizing performance and extending the battery’s lifespan. The TDT designation indicates a specific manufacturer or design for reliable battery management.
Multitec Stainless Steel Wire Stripper & Cutter (150B-SS)
[Cutter] Multitech MT-150B-SS Wire Stripper and Cutter The Multitech MT-150B-SS Wire Stripper and Cutter is a high-quality tool designed for professionals and DIY enthusiasts. Made from durable stainless steel, this versatile tool efficiently strips and cuts various wire types, making it ideal for electrical work. This Multitec MT-150B-SS Stripper is a new heavy duty handles with finger holding ring. Multitec MT-150B-SS Stripper is a High-grade alloy steel stripper/cutter ideal for professionals. The tool is suitable for the cutting. This cutter is broadly used for cutting fiber cable perpendicular to the cable axis. Suitable for electrical work by electricians and other tradesmen primarily for gripping, twisting, bending and cutting wire and cable. Technical Specifications Brand: Multitech Model: MT-150B-SS Material: Stainless Steel Color: Steel Grey with Green Handles Finish: Satin finish, rust-resistant Weight: Approximately 82 grams Features Dual Functionality: Combines wire stripping and cutting capabilities in one tool Ergonomic Design: Comfortable grip handles for ease of use during prolonged tasks High Strength: Built with high tensile strength to withstand heavy-duty use Rust Resistance: Made from stainless steel to prevent rust and corrosion Precision Cutting: Designed for clean cuts and accurate wire stripping Applications Ideal for electricians, technicians, and hobbyists Suitable for various electrical tasks including wiring, looping, and installation Effective for cutting fiber cables and other types of wires Specification: Brand Multitec Color STEEL GREY, Green Material Stainless-Steel Weight 50g Package Includes: 1 x Stainless Steel Wire Stripper & Cutter 150B-SS
Out of stock602030 3.7V 600mAH Lipo Rechargeable Battery
[LiPo Cell] Description 3.7-Volt 600 mAh Li-Po Rechargeable Single Battery The 3.7-Volt 600 mAh Li-Po (Lithium Polymer) rechargeable battery is a lightweight, compact power source ideal for various portable electronic devices. It offers a high energy density and reliable performance, making it perfect for RC toys, drones, wearables, IoT devices, and DIY projects. This battery is designed to deliver consistent power while ensuring safety with its built-in protection features against overcharging and over-discharging. Its small size and efficient capacity make it an excellent choice for applications requiring portability and long-lasting energy. Features: High Energy Density Delivers more power in a compact and lightweight form, ideal for portable applications. Reliable Performance Provides consistent voltage output, ensuring steady performance for connected devices. Compact and Lightweight Slim design fits easily into small and lightweight devices without adding bulk. Rechargeable Design Offers multiple recharge cycles for extended usability, making it cost-effective and eco-friendly. Safety Features Built-in protection circuit prevents overcharging, over-discharging, and short circuits for enhanced safety. Long Battery Life Capable of maintaining its capacity over hundreds of recharge cycles, ensuring durability. Wide Compatibility Suitable for a variety of devices, including RC vehicles, drones, smart devices, and DIY electronics. Fast Charging Support Compatible with fast charging setups for quick and efficient recharging. Low Self-Discharge Rate Retains charge when not in use, ensuring readiness when needed. Environmentally Friendly Made with recyclable materials, contributing to a lower environmental impact. This 3.7-Volt 600 mAh Li-Po battery is the perfect power solution for compact devices, combining durability, safety, and high performance in one reliable package Packages Includes: 1 x 602030 3.7V 600mAH Lipo Rechargeable Battery
JHD 16×2 Character LCD Display With Blue Backlight
[LED/LCD Display Module] If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only a little to display, the LCD 16×2 Parallel LCD Display is a quite good solution. This is a Original JHD 16×2 Character LCD Display With Blue Backlight as there are many fake JHD Displays in the Market. This is a great blue backlight LCD display. It is fantastic for Arduino based project. This LCD 16×2 Parallel LCD Display with Blue Backlight is very easy to interface with Arduino or Other Microcontrollers. This is LCD 16×2 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on RGB Liquid Crystal Display into your project. The display is 16 character by 2 line display that has a very clear and high contrast white text upon a blue background/backlight. The values shown on the display can be either simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing. For more displays click below, LED/LCD Display Features : 16 characters wide, 2 rows White text on the yellow background Single LED backlight included can be dimmed easily with a resistor or PWM. Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used) Specifications: Model： JHD659 B/W Display： 16×2 character Outline： 80.0×36.0×14.5 VA： 64.5×14.5 Controller： SPLC780D Character： 2.95×4.35 Driver： 1/16 LCD： STN Blue Negative Backlight： White LED Package Includes : 1 x JHD 16×2 Character LCD Display With Blue Backlight
Out of stockHighstar A Grade 3.2V 100Ah Prismatic LiFePO4 Battery with Cell Holder
[LiFePO4 Battery Cell] HIGHSTAR LiFePO4 100Ah 3.2V IFPP40130220 Battery Cell – High Performance & Long Life Product Data Sheet IFPP40130220-100 The HIGHSTAR LiFePO4 100Ah 3.2V IFPP40130220 Battery Cell is a high-performance, rechargeable lithium iron phosphate (LiFePO4) cell designed for demanding energy storage applications. With its high energy density, long cycle life, and exceptional safety features, this battery is ideal for solar energy storage, electric vehicles (EVs), backup power systems, and industrial applications. Key Features High Capacity & Voltage: 3.2V nominal voltage with a 100Ah capacity for reliable, long-lasting energy. Long Cycle Life: Over 4,000 charge cycles, ensuring durability and cost-effectiveness. Fast Charging & Discharging: Supports high charge/discharge currents for high-performance applications. Stable Performance: Low internal resistance for efficient power output. Enhanced Safety: Built-in protection against overcharging, over-discharging, and short circuits. Eco-Friendly: Free from toxic heavy metals like lead and cadmium. Check our others LiFePO4 cells : Click Here Technical Specifications Model: IFPP40130220 Nominal Voltage: 3.2V Nominal Capacity: 100Ah Discharge Cutoff Voltage: 2.5V Maximum Continuous Charge Current: 1C (50A) Standard Discharge Current: 1C (100A) Maximum Continuous Discharge Current: 1C (100A) Charging Voltage: 3.65V Dimensions: 40mm x 130mm x 220mm Weight: Approximately 2.8kg Applications The HIGHSTAR 100Ah LiFePO4 cell is suitable for various applications: Solar Energy Storage Perfect for off-grid solar systems, residential solar energy storage, and hybrid energy systems. Ensures stable and sustainable energy storage with high efficiency. Electric Vehicles (EVs) & E-Bikes Provides consistent power output for electric cars, motorcycles, and bicycles, improving performance and reliability. UPS & Backup Power Systems Ensures uninterrupted power supply for data centers, emergency power systems, and industrial equipment. Portable Power Stations & DIY Battery Packs Can be used in custom battery packs for camping, RVs, and marine applications. Why Choose HIGHSTAR LiFePO4 100Ah 3.2V IFPP40130220 Battery Cell? Superior Lifespan: Outlasts traditional lead-acid and lithium-ion batteries. Enhanced Safety: No risk of thermal runaway, explosion, or fire. Energy Efficient: Low self-discharge rate and high efficiency. Environmentally Friendly: 100% recyclable and non-toxic materials.
DC 3.6V-6V To 400KV Boost Step Up Power Module High Voltage Generator
[Step UP Buck Converter] Description Overview of this 3.6V-6V To 400KV step up high voltage generator Introducing the DC 3.6V-6V To 400KV Boost Step Up Power Module, a high voltage generator designed for various applications. This module operates efficiently, converting input voltages between 3.6V and 6V into an impressive 400KV output. Its step-up capability makes it an ideal choice for applications requiring high voltage, offering reliability and performance. Equipped with advanced technology, this boost converter ensures stable and consistent high voltage generation. Its compact design allows for versatile use in projects where space is a consideration. The 3.6V-6V To 400KV high voltage generator module is a trusted solution higher voltage. It is also use by enthusiasts, hobbyists, and professionals seeking a compact and efficient way to generate high voltages for experiment and electronic projects. Feature Input Voltage Range: The module operates easily within the input voltage range of 3.6V to 6V. And it also provide flexibility for a variety of power sources. High Voltage Output: With an impressive output voltage of 400KV. This module is also designed to deliver a trusted high voltage power supply for your projects. Efficient Boost Conversion Technology: Employing advanced step-up conversion technology. This module ensures efficiency to boost the input voltage to the desired 400KV output. Compact Design: The module feature a compact and space saving design. And also make it perfect for use in various electronic projects and experiments where space efficiency is crucial. Versatile Applications: Whether you’re engage in experiment setups, electronic project, or applications that demand a robust high voltage generator. This module proves to be a versatile and dependable solution. Specification Specification Details Input Voltage Range 3.6V – 6V Output Voltage 400KV Conversion Type Boost (Step Up) Efficiency Upto 93% Compact Design Yes, space-efficient for various applications Technology Advanced step-up conversion technology Applications Versatile, suitable for diverse high-voltage needs Weight 150gm Built-in Protections Overcurrent protection and input reverse polarity protection Main application of this 3.6V-6V To 400KV step up high voltage generator Educational Projects: This 3.6V-6V To 400KV high voltage generator module is perfect for education purposes. And also offers a hands on approach for students to delve into the fascinating world of physics and electronics. Whether used in classrooms or home based experiments. It also provides a safe and effective means to understand the principles of voltage conversion and boost circuit. High Voltage Experiments: For electric students who are passionate about exploring the realms of high-voltage electronics. It allows users to conduct a wide array of experiments and projects that need an elevated voltage levels. And also enable a deeper exploration of electronic phenomena and electric behavior. Electronic Prototyping: In the realm of electronic prototyping, where the translation of conceptual designs into tangible electronic circuits takes place. This power module serves as a key component. Its ability to deliver higher voltage levels becomes crucial for testing and refining prototypes. And also ensure that electronic devices meet their voltage requirements effectively. Scientific Research: 3.6V-6V To 400KV high voltage generator is also use as a trusted asset in their experiments. The capacity to generate high voltage is often important for various scientific studies. Electronic Art Installations: For artists working on electronic art installations that demand unique lighting effects or interactive elements with heightened voltage. this power module also use as a creative medium. Package Includes: 1 x 400KV Step Up Power Module
12.6V 2A Lithium-ion Battery charger for 18650/26700 NMC Battery Pack with CC and CV
[Adaptor Power Supply] The 12.6V 2A Li-ion Battery Pack Smart Charger is a high-performance SMPS-based charging solution designed specifically for 3S (11.1V nominal) lithium-ion battery packs. Delivering a stable constant output voltage of 12.6V and a constant charging current of 2A, this charger ensures fast, efficient, and safe charging for lithium battery systems. Built with advanced control circuitry, the charger automatically switches between constant current (CC) and constant voltage (CV) charging modes to protect the battery and maximize its lifespan. The built-in cooling fan provides excellent heat dissipation, allowing continuous operation under heavy load. For maximum safety, the charger features output overload and short-circuit protection. In case of a fault, the charger enters an auto-restart protection mode, alternately enabling and disabling the power MOSFET until the fault condition is removed — effectively protecting both the charger and the battery pack. With a wide AC input range of 100–270V, this charger works reliably in Indian and international power conditions. Its compact table-top design with C14 socket input makes it ideal for DIY battery packs, power backup systems, robotics, solar storage, and portable energy solutions. ⭐ KEY FEATURES ✔ Designed for 3S Lithium-Ion Battery Packs (12.6V charging)✔ Constant Voltage & Constant Current Charging (CC/CV Mode)✔ Output: 12.6V DC, 2A (25W)✔ Built-in Overload & Short-Circuit Protection with Auto Restart✔ Cooling Fan for efficient heat dissipation✔ Wide Input Voltage Range: 100–270V AC✔ High efficiency & stable output✔ Ideal for DIY battery packs, robotics, solar & backup systems 🔧 TECHNICAL SPECIFICATIONS Category: Lithium-Ion Battery Charger (SMPS) Wattage: 25W Output Voltage: DC 12.6V Output Current: 2A Charging Mode: Constant Voltage / Constant Current (CV / CC) Input Voltage: AC 100 – 270V Input Frequency: 47 – 63 Hz Input Current: 0.69 A Single Output: 12.6V / 2A Socket Type: C14 Cooling: Built-in Cooling Fan Operating Temperature: Up to 85°C 🎯 APPLICATIONS 3S lithium-ion battery packs DIY power banks & battery projects Robotics & automation systems Solar energy storage UPS & backup battery charging Electric mobility & embedded systems 📦 PACKAGE INCLUDES 1 × 12.6V 2A Table Top Smart 25W Lithium-Ion Battery Charger
DMEGC INR18650-29E 3.7V 2900mAh Li-Ion Battery
[Lithium Battery Cell] DMEGC INR18650-29E 3.7V 2900mAh Li-Ion Battery The DMEGC Cylindrical Lithium-ion 18650 Cell is a high-performance, rechargeable lithium-ion battery with a 2900mAh capacity and a 3.65V nominal voltage. Designed for high energy density, long cycle life, and stable performance, this cell is ideal for portable electronics, power tools, electric vehicles (EVs), energy storage systems, and custom battery packs. You can check our others lithium cells click here. Product Data Sheet (INR18650-29E) Key Features High Capacity & Voltage: 3.65V nominal voltage with a 2900mAh capacity for extended usage. Long Cycle Life: Over 1,000 charge cycles, ensuring durability and cost-effectiveness. Fast Charging & Discharging: Supports high charge/discharge currents for high-performance applications. Stable Performance: Low internal resistance for efficient power output. Enhanced Safety: Built-in protection against overcharging, over-discharging, and short circuits. Eco-Friendly: Free from toxic heavy metals like lead and cadmium. Technical Specifications Model: 18650 Nominal Voltage: 3.65V Nominal Capacity: 2900mAh Minimum Capacity: 2750mAh Charge Voltage: 4.2V Discharge Cutoff Voltage: 2.5V Cycle Life: >1,000 cycles (80% DOD) Max Charge Current: 1C (2.6A) Max Discharge Current: 2C (5.2A) Dimensions: 18mm x 65mm Weight: Approximately 47g Applications The DMEGC 2900mAh 18650 cell is widely used in various applications: Portable Electronics & Power Banks Perfect for laptops, flashlights, power banks, and other consumer electronics, ensuring long-lasting power. Power Tools & DIY Battery Packs Provides consistent high power output, making it ideal for cordless drills, electric screwdrivers, and other tools. Electric Vehicles (EVs) & E-Bikes Offers a stable and high-energy output for electric bicycles, scooters, and lightweight electric vehicles. Energy Storage Systems Can be used in solar energy storage systems, home battery banks, and off-grid applications. Why Choose DMEGC Cylindrical Lithium-ion Cell 2900mAh 3.65V 18650? Superior Lifespan: Long cycle life compared to standard lithium-ion cells. Enhanced Safety: No risk of thermal runaway, explosion, or fire. Energy Efficient: Low self-discharge rate and high efficiency. Environmentally Friendly: 100% recyclable and non-toxic materials. Discharge Cut-off Voltage: 2.5V Package Includes: 1 x DMEGC INR18650-29E 3.7V 2900mAh Li-Ion Battery
DMEGC INR21700-45E 3.7V 4500mAh Li-Ion Battery
[Lithium Battery Cell] DMEGC Cylindrical Lithium-ion Cell 4500mAh 3.7V 21700 – High Capacity & Reliable Power The DMEGC Cylindrical Lithium-ion 21700 Cell is a high-performance, rechargeable lithium-ion battery with a 4500mAh capacity and a 3.7V nominal voltage. Designed for high energy density, long cycle life, and stable performance, this cell is ideal for portable electronics, power tools, electric vehicles (EVs), energy storage systems, and custom battery packs. You can check our others lithium cells click here. Product Data Sheet (INR 21700-45E) Key Features High Capacity & Voltage: 3.7V nominal voltage with a 4500mAh capacity for extended usage. Long Cycle Life: Over 1,000 charge cycles, ensuring durability and cost-effectiveness. Fast Charging & Discharging: Supports high charge/discharge currents for high-performance applications. Stable Performance: Low internal resistance for efficient power output. Enhanced Safety: Built-in protection against overcharging, over-discharging, and short circuits. Eco-Friendly: Free from toxic heavy metals like lead and cadmium. Technical Specifications Model: 21700 Nominal Voltage: 3.7V Nominal Capacity: 4500mAh Minimum Capacity: 4400mAh Charge Voltage: 4.2V Discharge Cut-off Voltage: 2.5V Cycle Life: >1,000 cycles (80% DOD) Max Charge Current: 1C (4.5A) Maximum Discharge Current: 2C (9.0A) Dimensions: Diameter: 21mm x 70mm Weight: Approximately 70g Applications The DMEGC 4500mAh 21700 cell is widely used in various applications: Portable Electronics & Power Banks Perfect for laptops, flashlights, power banks, and other consumer electronics, ensuring long-lasting power. Power Tools & DIY Battery Packs Provides consistent high power output, making it ideal for cordless drills, electric screwdrivers, and other tools. Electric Vehicles (EVs) & E-Bikes Offers a stable and high-energy output for electric bicycles, scooters, and lightweight electric vehicles. Energy Storage Systems Can be used in solar energy storage systems, home battery banks, and off-grid applications. Why Choose DMEGC Cylindrical Lithium-ion Cell 4500mAh 3.7V 21700? Superior Lifespan: Long cycle life compared to standard lithium-ion cells. Enhanced Safety: No risk of thermal runaway, explosion, or fire. Energy Efficient: Low self-discharge rate and high efficiency. Environmentally Friendly: 100% recyclable and non-toxic materials. Package Includes: 1 x DMEGC INR21700-45E 3.7V 4500mAh Li-Ion Battery
HC-05 6pin Bluetooth Module with Button
[Bluetooth Module] HC-05 Bluetooth Module Are you in search of an HC-05 Bluetooth Module, a versatile and cost-effective solution for your wireless communication needs? Look no further. This Bluetooth module offers seamless wireless communication for a wide range of applications, from GPS navigation systems to water and electricity meter readings. Whether you're an electronics enthusiast, a DIY hobbyist, or a professional looking for competitive pricing, this module is designed to meet your requirements. The HC-05 Bluetooth Module lets you switch between Master and Slave modes with ease using AT Commands, and it comes pre-configured in Slave Mode. Its compatibility with devices such as phones, laptops, and microcontrollers ensures hassle-free connectivity. With a USART interface, it's a perfect fit for microcontrollers supporting USART communication. Plus, you can configure its settings effortlessly using the command mode. Ideal for DIY projects and data exchange, this Bluetooth module provides LED feedback for seamless operation, giving you the best bang for your buck. Buy the HC-05 Bluetooth Module today and enjoy top-notch wireless communication at a competitive price. The HC-05 Bluetooth Module with Baseplate is a slave-only device. This means that it can connect to most phones and computers with Bluetooth but it cannot connect to another slave-only device such as keyboards and other HC-06 modules. To connect with other slave devices a master module would be necessary such as the HC-05 module ,which can do both master and slave. The slave mode in HC-05 Bluetooth cannot initiate a connection to another Bluetooth device but can accept connections. Master mode can initiate a connection to other devices. Key Features: Working current: matching for 30 mA, matching the communication for 8 mA. With the computer and Bluetooth adapter, PDA, seamless connection equipment. Use the CSR mainstream Bluetooth chip, Bluetooth V2.0 protocol standards. Potter default rate of 9600, the user can be set up. Bluetooth protocol: Bluetooth Specification v2.0+EDR Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps. Security: Authentication and encryption. Profiles: Bluetooth serial port. HC-05 Bluetooth Module Pin Diagram: HC-05 Bluetooth Module Pin Description: Pin Number Pin Name Description 1 Enable / Key This pin is used to switch between command mode (set low) and Data Mode (set high). The default setting of this HC 05 Bluetooth module is Data Mode. 2 Vcc This pin can be used to power the Bluetooth module. It has an operating voltage of +5V DC. 3 Ground Connect the module's ground pin to the Microcontroller’s Ground Pin (GND). 4 TX – Transmitter Sends serial data to the MCU. This pin will distribute all Bluetooth data in the form of serial data to the Microcontroller. 5 RX – Receiver Obtain Serial Data. This pin will transmit all serial data that is provided to it over Bluetooth. 6 State The on-board LED attached to the state pin can be used as feedback to see if Bluetooth is functioning properly. 7 LED Indicates the status of Module Blink once in 2 sec: Command Mode Repeated Blink: Waiting for connection in Data Mode Blink twice in 1 sec: Connection successful in Data Mode 8 Button Used to control the Key/Enable pin to switch between Data Mode and command Mode HC-05 Default Values: Bluetooth Name: “HC-05” Password: 1234 or 0000 Communication: Slave Mode: Data Mode Data Mode Baud Rate: 9600, 8, N, 1 Applications Can be used for wireless communication between two microcontroller units. Communicate with Laptop mobile phones etc. Data Logging Wireless Robots DIY Home Automation Projects GPS-based DIY projects. Specifications: Serial communications 9600-115200bps Frequency 2.4~2.524 GHz Power Supply 5VDC Operating Current 30mA Range <100m Dimensions 30mm x 14mm x 2.2 mm Weight 5 grams Package Includes: 1 x HC-05 Bluetooth Module
DMEGC INR18650-32E 3.7V 3200mAh 3C Li-Ion Battery
[Lithium Battery Cell] DMEGC Cylindrical Lithium-ion Cell 3200mAh 3.7V 18650 – High Performance & Reliable Power The DMEGC Cylindrical Lithium-ion 18650 Cell is a high-performance, rechargeable lithium-ion battery with a 3200mAh capacity and a 3.7V nominal voltage. Designed for high energy density, long cycle life, and stable performance, this cell is ideal for portable electronics, power tools, electric vehicles (EVs), energy storage systems, and custom battery packs. You can check our others lithium cells click here. Product Data Sheet (INR18650-32E) Key Features High Capacity & Voltage: 3.7V nominal voltage with a 3200mAh capacity for extended usage. Long Cycle Life: Over 1,000 charge cycles, ensuring durability and cost-effectiveness. Fast Charging & Discharging: Supports high charge/discharge currents for high-performance applications. Stable Performance: Low internal resistance for efficient power output. Enhanced Safety: Built-in protection against overcharging, over-discharging, and short circuits. Eco-Friendly: Free from toxic heavy metals like lead and cadmium. Technical Specifications Model: 18650 Nominal Voltage: 3.7V Nominal Capacity: 3200mAh Minimum Capacity: 3100mAh Charge Voltage: 4.2V Discharge Cut-off Voltage: 2.5V Cycle Life >1,000 cycles (80% DOD) Maximum Discharge Current: 1C (3.2A) Maximum Discharge Current: 2C (6.4A Dimensions: 18mm x 65mm Weight: Approximately 48g Applications The DMEGC 3200mAh 18650 cell is widely used in various applications: Portable Electronics & Power Banks Perfect for laptops, flashlights, power banks, and other consumer electronics, ensuring long-lasting power. Power Tools & DIY Battery Packs Provides consistent high power output, making it ideal for cordless drills, electric screwdrivers, and other tools. Electric Vehicles (EVs) & E-Bikes Offers a stable and high-energy output for electric bicycles, scooters, and lightweight electric vehicles. Energy Storage Systems Can be used in solar energy storage systems, home battery banks, and off-grid applications. Why Choose DMEGC Cylindrical Lithium-ion Cell 3200mAh 3.7V 18650? Superior Lifespan: Long cycle life compared to standard lithium-ion cells. Enhanced Safety: No risk of thermal runaway, explosion, or fire. Energy Efficient: Low self-discharge rate and high efficiency. Environmentally Friendly: 100% recyclable and non-toxic materials. Package Includes : 1 x DMEGC INR18650-32E 3.7V 3200mAh 3C Li-Ion Battery
Out of stock32700 32650 3.2V Rechargeable 6000mAh LifePO4 Battery Cell for EV
[LiFePO4 Battery Cell] 32700 32650 3.2 V 6000 MAH LiFePO4 Battery This Standard 32700 32650 3.2 V Rechargeable 6000mAh LifePO4 Battery Cell is a single cell powerful battery cell with a massive 6000 mAh capacity. This LifePO4 battery is very convenient to install in your project where 3.2 Volt with high capacity is needed. The Standard 6000mAh 3.2V Rechargeable LifePO4 Battery is a source of power for various portable devices including flashlights, hobby transmitters, and receivers, etc. This Battery can be the best Replacement to the normal Non-Rechargeable AA Battery used in many applications such as in RC Transmitter/Reciever Remote, which can make your flight driving experience very cost-effective and efficient in terms of power output than that of conventional AA batteries. IMPORTANT: Never completely discharge the LifePO4 battery ( below 2.5V under load ). Charge fully to 4.2V before first use. Never attach any metal moving part like a magnet to the battery contact. Never use force to install (insert) LifePO4 battery. Do not use old and new battery cells together. Use only a high-quality battery charger. Do not expose to heat. Do not short (connect) positive (top), and negative (bottom) battery terminals (contacts). Keep battery that is not in use in the plastic holder (or any insulating [plastic] container). Do not charge the battery over 4.22V (another reason to use a high-quality battery charger). Don’t charge unattended. Do not store your LifePO4 batteries fully charged (for an extended period of time). Store in a cold and dry place at approximately 3.7V (storage charge). After the battery is discharged-don’t leave it discharged, charge it as soon as possible. FEATURES: Shape: Cylindrical Battery Battery Type: Lithium-Ion Rechargeable Battery High performance and capacity Flat top to suit many devices fitting PACKAGE INCLUDES: 1 x 32700 or 32650 3.2 V Rechargeable 6000mAh LifePO4 Battery Cell for EV. Note: Color and Print on the Cells may vary with every lot. We ship it randomly
16s 2Amps Active Balancer Equalizer for NCM/LFP Battery
[Lithium Battery Protection Board] The 16S2A Active Balancer (NEEY) is a battery management solution designed for 16 series lithium-based battery packs. It supports 2A of current per cell for active balancing, which helps ensure that all cells in the battery pack are charged to the same voltage level. Active balancing optimizes battery performance by redistributing energy from higher-voltage cells to lower-voltage cells, thus improving the overall efficiency and lifespan of the battery pack. This balancer helps to prevent overcharging or deep discharging of individual cells, ensuring a safer and more reliable operation. The NEEY designation indicates the specific brand or model, offering efficient and effective cell balancing for applications such as energy storage systems, electric vehicles, and other lithium-based power solutions. Balancer Specification – Suitable – 16S 48volt Applicable battery type : NCM/LFP Teemary Lithium/Lithium Iron Single voltage working range: NCM/LFP version 3.0V-4.2V Balance method : Detect the nearby voltage difference is greater than 0.1V totrigger the start of balanced the adjacent battery voltage difference is less than 003V to stop working Balance current: 0.2V Adjacent voltage difference 0.1V, Balance current: 054-0.74, Adjacent voltage difference 0.2V. Balance current: 2A LED indicator : 1. When the equalization light is on the equalization work is turned on, 2. The equalization light goes out the equalization circuit sleeps Operating Temperature Range: -20° to 60° The smaller the differential voltage, the smaller the balance current. package Include – 1. Balancer Unit 2. Balancer Wires
Out of stockLCD2004 Parallel LCD Display Yellow Backlight with IIC/I2C Interface
[LED/LCD Display Module] If you want to add some visual output to your Arduino projects, you’ll need a display. If you need moderate data on display, the LCD2004 Parallel LCD Display is a quite good solution. This is LCD2004 Parallel LCD Display that provides a simple and cost-effective solution for adding a 20×4 Black on RGB Liquid Crystal Display into your project. The display is 20 character by 4 line display has a very clear and high contrast black text upon a yellow background/backlight. This is great yellow backlight LCD display. It is fantastic for Arduino based project. This LCD2004 Parallel LCD Display with Yellow Backlight is very easy to interface with Arduino or Other Microcontrollers. The values shown on the display can be either a simple text or numerical values read by the sensors, such as temperature or pressure, or even the number of cycles that the Arduino is performing. One thing to consider is you’ll waste about 8 Pins on your Arduino for the display to get working. Luckily there exists an I2C adapter that you can solder right onto the pins of the display. So all you need to connect are the I2C pins, which shows a good library and little of coding. For more displays click below, LED/LCD Display Features : 20 characters wide, 4 rows Black text on the yellow background The module can easily interface with an MCU The module is a low-power consumption character LCD Module with a built-in controller Single LED backlight included can be dimmed easily with a resistor or PWM. Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used) Package Includes : 1 x LCD2004 Parallel LCD Display Yellow Backlight with IIC/I2C Interface
2600mAh DMEGC INR18650-26E 3.7V Li-ion Battery
[Lithium Battery Cell] DMEGC Cylindrical Lithium-ion 18650 Cell 2600mAh DMEGC INR18650-26E 3.7V Li-ion Battery, The DMEGC Cylindrical Lithium-ion 18650 Cell is a high-performance, rechargeable lithium-ion battery with a 2600mAh capacity and a 3.65V nominal voltage. Designed for high energy density, long cycle life, and stable performance, this cell is ideal for portable electronics, power tools, electric vehicles (EVs), energy storage systems, and custom battery packs. You can check our others lithium cells click here. Product Data Sheet (INR18650-26E) Key Features High Capacity & Voltage: 3.65V nominal voltage with a 2600mAh capacity for extended usage. Long Cycle Life: Over 1,000 charge cycles, ensuring durability and cost-effectiveness. Fast Charging & Discharging: Supports high charge/discharge currents for high-performance applications. Stable Performance: Low internal resistance for efficient power output. Enhanced Safety: Built-in protection against overcharging, over-discharging, and short circuits. Eco-Friendly: Free from toxic heavy metals like lead and cadmium. Technical Specifications Model: 18650 Nominal Voltage: 3.65V Nominal Capacity: 2600mAh Minimum Capacity: 2500mAh Charge Voltage: 4.2V Discharge Cutoff Voltage: 2.5V Cycle Life: >1,000 cycles (80% DOD) Max Charge Current: 1C (2.6A) Max Discharge Current: 2C (5.2A) Dimensions: 18mm x 65mm Weight: Approximately 45g Applications The DMEGC 2600mAh 18650 cell is widely used in various applications: Portable Electronics & Power Banks Perfect for laptops, flashlights, power banks, and other consumer electronics, ensuring long-lasting power. Power Tools & DIY Battery Packs Provides consistent high power output, making it ideal for cordless drills, electric screwdrivers, and other tools. Electric Vehicles (EVs) & E-Bikes Offers a stable and high-energy output for electric bicycles, scooters, and lightweight electric vehicles. Energy Storage Systems Can be used in solar energy storage systems, home battery banks, and off-grid applications. Why Choose DMEGC Cylindrical Lithium-ion Cell 2600mAh 3.65V 18650? Superior Lifespan: Long cycle life compared to standard lithium-ion cells. Enhanced Safety: No risk of thermal runaway, explosion, or fire. Energy Efficient: Low self-discharge rate and high efficiency. Environmentally Friendly: 100% recyclable and non-toxic materials. Package Includes:- 1x DMEGC INR 18650-26E lithium-ion rechargeable battery.