All products · 61 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
IOT Plug & Play
MCU: ESP8266/ESP32 based (Wi-Fi 2.4GHz). Supply: 5V input, onboard 3.3V regulation. Protocols: MQTT/HTTP. Cloud/App support. GPIO with pre-wired ports. Typical sensors: DHT11/22, LDR, relay module, IR, PIR.
Only 1 leftIOT Smarthome Kit
MCU: ESP8266/ESP32. Modules: 1–4 channel relay (optocoupled preferred), PIR, LDR, DHT. Control: app/web dashboard. Protocols: MQTT/HTTP. Power: 5V input. Properly isolated AC relay use.
Only 2 leftRobotic Spider Kit
Legs: 4/6/8-legged variants. Servos: 8–12 micro servos. Controller: Arduino/ESP32 compatible. Gait programming. Power: 5–6V high-current (2A–5A depending on servos). Frame: acrylic/ABS.
Only 1 leftPlay Mex
MCU: ESP8266/ESP32. Sensors: soil moisture (capacitive preferred), temp/humidity (DHT), light sensor. Actuation: relay/pump/solenoid valve demo. Dashboard: MQTT/HTTP. Power: 5V input + relay isolation.
Only 1 leftIOT Health Kit
MCU: ESP32 (good ADC/BLE). Sensors: pulse sensor/PPG module, body temp sensor, SpO2 module optional. Data logging: serial/cloud. Power: 5V USB. Educational use, non-clinical.
Only 2 leftRC Car Kit
Chassis: 2WD/4WD. Motors: TT DC geared motors (3–6V) or higher. Driver: L298N/L293D. Controller: Arduino/ESP32 optional. Remote: IR/2.4GHz/Bluetooth. Power: 2×18650 or 4×AA. Optional ultrasonic/line sensor.
Out of stock0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306
[LED/LCD Display] 0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306 The 0.96-inch Blue OLED Display Module is a compact graphical display based on the SSD1306 driver IC, featuring a 128×64 pixel resolution and blue monochrome display. This version has a 7-pin interface with a dedicated CS (Chip Select) pin, making it suitable for 4-wire SPI communication. The module is factory-configured for SPI and can also be modified for I2C/IIC communication on compatible board versions. With its compact size, wide viewing angle and low-power OLED technology, it is suitable for Arduino, ESP32, ESP8266, STM32, Raspberry Pi and other microcontroller projects. ⭐ Key Features 0.96-inch blue OLED display 128 × 64 pixel resolution SSD1306 driver IC 7-pin interface Dedicated CS (Chip Select) pin Factory configured for 4-wire SPI Supports SPI and I2C/IIC with appropriate configuration 3.3V/5V compatible on supported module versions No backlight required Low power consumption Wide viewing angle of more than 160° Compact PCB design Pre-soldered 7-pin male header Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi projects 📋 Technical Specifications Display Type: OLED (Organic Light-Emitting Diode) Display Colour: Blue Display Size: 0.96 inch Driver IC: SSD1306 Resolution: 128 × 64 pixels Interface: SPI / I2C Default Interface: 4-wire SPI Input Voltage: 3.3V–5V Viewing Angle: >160° Module Dimensions: Approximately 27 × 27 × 4mm Operating Temperature: Approximately -30°C to +70°C Header: 7-pin male header, pre-soldered Display Type: Monochrome blue OLED 🔌 7-Pin Interface The 7-pin version provides the following connections: GND – Ground VCC – Power supply D0 / SCK / CLK – SPI clock D1 / MOSI / SDA – SPI data RES / RST – Display reset DC / A0 – Data/Command selection CS – Chip Select 🛠️ SPI Connection The module is normally supplied in 4-wire SPI configuration. For an Arduino Uno, a typical connection is: VCC → 5V GND → GND D0 → SCK / D13 D1 → MOSI / D11 RES → Digital I/O DC → Digital I/O CS → Digital I/O The dedicated CS pin allows the OLED to share the SPI bus with other devices such as SD cards or additional SPI peripherals. 🔄 I2C / IIC Configuration On compatible versions, the module can be converted from SPI to I2C by changing the appropriate resistor configuration on the PCB. The supplied board configuration may require: Moving the resistor from R3 to R1 Shorting R8 with solder Using D0 as SCL Using D1 as SDA Configuring DC for the I2C address The exact resistor positions can vary between board revisions, so check the markings on your particular PCB before modification. 🎯 Applications Arduino projects ESP32 projects ESP8266 projects STM32 development Raspberry Pi projects IoT devices Sensor displays Voltage/current meters Battery monitors Temperature displays Digital clocks Data loggers Portable electronic devices Robotics DIY measuring instruments Embedded systems Menu and status displays 💡 Advantages of OLED OLED technology is self-emissive, meaning the pixels produce their own light and do not require a conventional backlight. This provides high contrast, compact construction and a wide viewing angle while keeping power consumption relatively low. ⚠️ Important Notes This is the 7-pin SPI version, not the 6-pin version. The module is normally configured for SPI communication. Check the PCB labels before connecting the module. Do not exceed the specified supply voltage. Although many versions support 5V operation, the exact voltage tolerance can vary between board revisions. I2C operation may require hardware resistor modification. The actual PCB layout and component markings may vary slightly between production batches. Display colour: Blue. Libraries such as Adafruit SSD1306 and U8g2 can be used with compatible microcontrollers. 📦 Package Includes 1 × 0.96 Inch Blue SPI OLED Display Module
Black Plastic 3×18650 Battery Holder or Case Series Connection With Wire
[Lithium Battery Holder] Black Plastic 3×18650 Battery Holder – Series Connection The Black Plastic 3×18650 Battery Holder is designed to securely hold three 18650 lithium-ion battery cells in series configuration. It provides a convenient and organized way to mount 18650 cells for DIY battery packs, portable electronics, power supplies, LED projects, and other battery-powered applications. The holder is made from durable plastic and features mounting holes for secure installation using suitable screws. It is supplied with red and black connecting wires for convenient connection to an external circuit. ⭐ Key Features Designed for 3 × 18650 battery cells Series connection Black plastic construction Without cover Secure battery positioning Easy installation Built-in mounting holes Red and black connecting wires Suitable for DIY battery pack projects Compact and lightweight design 📋 Technical Specifications Product Type: 18650 Battery Holder Battery Capacity: 3 Cells Battery Type: 18650 Li-Ion Cell Configuration: 3S / Series Connection Nominal Output Voltage: Approximately 11.1V with 3.7V cells Fully Charged Voltage: Approximately 12.6V Material: Plastic Color: Black Cover: Without Cover Connection Wires: Red and Black Mounting: Screw Mount Mounting Holes: Yes Recommended Screw Size: Approximately 3mm Application: Battery Pack / Portable Electronics 🔌 Connection The three 18650 cells are connected in series, increasing the total voltage while maintaining the capacity of a single cell. With standard 3.7V nominal cells, the pack is approximately 11.1V nominal and 12.6V when fully charged. The red wire is the positive connection and the black wire is the negative connection. 🔧 Applications DIY 18650 Battery Packs 3S Lithium-Ion Battery Packs Portable Electronics LED Lighting Projects DIY UPS Projects Arduino Projects ESP8266 / ESP32 Projects Rechargeable Electronics Battery-Powered Devices Electronics Prototyping 📦 Package Includes 1 × 3×18650 Battery Holder / Case – Series Connection, Without Cover ⚠️ Precautions Use only compatible 18650 Li-Ion cells. Use three cells with matching capacity, chemistry, age, and charge condition. Use a suitable 3S BMS/protection and charging circuit. Do not mix damaged or mismatched cells. Check polarity carefully before installation. Do not short-circuit the battery terminals. Do not use damaged, swollen, or leaking cells. Ensure the holder and wiring are securely installed.
802580 LiPo Battery 700mAh 3.7V High Discharge 25c for Drone
[LiPo Cell] LiPo Battery 700mAh 3.7V High Discharge 802580 3.7V Lithium Polymer Battery • 700mAh Capacity • 25C High Discharge • 802580 Cell • Molex 2.0mm 2-Pin Connector The LiPo Battery 700mAh 3.7V High Discharge 802580 is a compact and lightweight Lithium Polymer (LiPo) rechargeable battery designed for applications that require high current output in a small form factor. Built with high-quality lithium polymer cells, this battery delivers a nominal voltage of 3.7V and a 700mAh capacity, making it ideal for RC toys, drones, mini helicopters, robotics, wireless electronics, and DIY projects. With a 25C continuous discharge rating, this battery can provide rapid bursts of current for motors and other high-power devices. The battery comes with a Molex 2.0mm 2-pin connector and an integrated protection PCB, offering added safety during charging and discharging. The 802580 cell size refers to the approximate dimensions of 8.0 × 25 × 80 mm, allowing the battery to fit easily into compact electronic devices while maintaining excellent power-to-weight performance. Note: This battery is intended for high-discharge applications such as RC models and robotics. It is not recommended for long-duration low-current devices such as cameras or data loggers. ⭐ Features High-quality 3.7V 700mAh LiPo battery 25C continuous discharge capability Compact 802580 cell size Lightweight design Stable voltage output Built-in protection circuit (PCB) Pre-installed Molex 2.0mm 2-pin connector Excellent power-to-weight ratio Rechargeable and reusable Suitable for high-current applications Easy plug-and-play installation 📋 Technical Specifications Product Type: Rechargeable Lithium Polymer (LiPo) Battery Battery Chemistry: Lithium Polymer (Li-ion Polymer) Cell Size: 802580 Nominal Voltage: 3.7V Full Charge Voltage: 4.20V Typical Capacity: 700mAh Discharge Rating: 25C Continuous Dimensions: Approx. 8.0 × 25 × 80 mm Weight: Approx. 18g Connector Type: Molex 2.0mm 2-Pin Protection Circuit: Built-in PCB Protection Rechargeable: Yes 🔧 Applications Suitable for: RC Cars RC Airplanes RC Helicopters Drones & Quadcopters Robotics Projects Arduino Projects ESP32 Projects DIY Electronics Portable Devices Wireless Modules Educational Projects Electronic Prototyping Battery Replacement Projects Miniature Electronics 📦 Package Includes 1 × LiPo Battery 700mAh 3.7V High Discharge 802580 with Molex 2.0mm 2-Pin Connector ⚠️ Safety Instructions Use only LiPo-compatible chargers. Do not charge above 4.20V. Do not discharge below the recommended cut-off voltage. Do not short-circuit the battery terminals. Do not puncture, crush, or expose the battery to fire. Store partially charged in a cool, dry place when not in use. Ensure connector polarity matches your device before connection.
702035 LiPo Battery 400mAh 3.7V High Discharge 25C For Drone
[LiPo Cell] LiPo Battery 400mAh 3.7V High Discharge 702035 3.7V Lithium Polymer Battery • 400mAh Capacity • 25C High Discharge • 702035 Cell • Molex 2.0mm 2-Pin Connector The LiPo Battery 400mAh 3.7V High Discharge 702035 is a compact and lightweight Lithium Polymer (LiPo) rechargeable battery designed for applications that require high current output in a small form factor. Built with high-quality lithium polymer cells, this battery delivers a nominal voltage of 3.7V and a 400mAh capacity, making it ideal for RC toys, drones, mini helicopters, robotics, wireless electronics, and DIY projects. With a 25C continuous discharge rating, this battery can provide rapid bursts of current for motors and other high-power devices. The battery comes with a Molex 2.0mm 2-pin connector and an integrated protection PCB, offering added safety during charging and discharging. The 702035 cell size refers to the approximate dimensions of 7.0 × 20 × 35 mm, allowing the battery to fit easily into compact electronic devices while maintaining excellent power-to-weight performance. Note: This battery is intended for high-discharge applications such as RC models and robotics. It is not recommended for long-duration low-current devices such as cameras or data loggers. ⭐ Features High-quality 3.7V 400mAh LiPo battery 25C continuous discharge capability Compact 702035 cell size Lightweight design Stable voltage output Built-in protection circuit (PCB) Pre-installed Molex 2.0mm 2-pin connector Excellent power-to-weight ratio Rechargeable and reusable Suitable for high-current applications Easy plug-and-play installation 📋 Technical Specifications Product Type: Rechargeable Lithium Polymer (LiPo) Battery Battery Chemistry: Lithium Polymer (Li-ion Polymer) Cell Size: 702035 Nominal Voltage: 3.7V Full Charge Voltage: 4.20V Typical Capacity: 400mAh Discharge Rating: 25C Continuous Dimensions: Approx. 7.0 × 20 × 35 mm Weight: Approx. 12g Connector Type: Molex 2.0mm 2-Pin Protection Circuit: Built-in PCB Protection Rechargeable: Yes 🔧 Applications Suitable for: RC Cars RC Airplanes RC Helicopters Drones & Quadcopters Robotics Projects Arduino Projects ESP32 Projects DIY Electronics Portable Devices Wireless Modules Educational Projects Electronic Prototyping Battery Replacement Projects Miniature Electronics 📦 Package Includes 1 × LiPo Battery 400mAh 3.7V High Discharge 702035 with Molex 2.0mm 2-Pin Connector
107 × 61mm 5V 180mA Mini Solar Panel Cell Module
[Solar Panel] ☀️ 107 × 61mm 5V 180mA Mini Solar Panel Cell Module (0.9W) 5V Output • 180mA Current • Polycrystalline Solar Cell • Compact & Lightweight • DIY Solar Projects The 107 × 61mm Mini Solar Panel Cell Module is a compact and efficient photovoltaic module designed to convert sunlight into clean and renewable electrical energy. Delivering a stable 5V output with a maximum current of 180mA, this solar panel is ideal for powering small electronic devices, battery charging circuits, educational projects, and DIY solar applications. Built using high-quality polycrystalline silicon solar cells, the panel provides efficient energy conversion with reliable performance under direct sunlight. Its compact size and lightweight construction make it easy to integrate into portable electronics, robotics, IoT devices, and renewable energy projects. Designed with a durable, weather-resistant construction, the module is suitable for both indoor demonstrations and outdoor applications. Pre-drilled mounting holes allow quick installation on enclosures, backpacks, models, and custom solar-powered devices. ⭐ Features High-efficiency polycrystalline solar panel Stable 5V DC output Maximum output current of 180mA Maximum power output of 0.9W Compact and lightweight design Efficient solar energy conversion Weather-resistant construction Pre-drilled mounting holes Easy integration into DIY projects Eco-friendly renewable energy source Maintenance-free operation Suitable for educational and hobby applications 📋 Technical Specifications Product Type: Mini Solar Panel Cell Module Panel Dimensions: 107 × 61 mm Cell Type: Polycrystalline Silicon Maximum Power Output: 0.9W Output Voltage: 5V DC Maximum Output Current: 180mA Conversion Efficiency: Approx. 17% Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +85°C Construction: Waterproof, Weather-Resistant Mounting: Pre-Drilled Mounting Holes Material: High-Quality Polycrystalline Silicon Weight: Approx. 16g 🔧 Applications Suitable for: DIY Solar Projects Solar Battery Chargers Mobile Charging Projects Arduino Projects ESP32 Projects Raspberry Pi Accessories Robotics IoT Devices Solar Garden Lights Educational Science Experiments Portable Electronics Renewable Energy Demonstrations Emergency Backup Projects Small DC Power Applications 📦 Package Includes 1 × 107 × 61mm 5V 180mA Mini Solar Panel Cell Module ⚠️ Note Output voltage and current depend on sunlight intensity, panel angle, and environmental conditions. For battery charging applications, use a suitable charge controller or charging module. Designed for low-power electronic projects and educational use. Product appearance and dimensions may vary slightly depending on the manufacturing batch.
110 × 69mm 5V 180mA Mini Solar Panel Cell Module
[Solar Panel] ☀️ 110 × 69mm 5V 180mA Mini Solar Panel Cell Module (0.9W) 5V Output • 180mA Current • 0.9W Power • Polycrystalline Solar Cell • Compact & Lightweight The 110 × 69mm 5V 180mA Mini Solar Panel Cell Module is a compact and efficient photovoltaic module designed to convert sunlight into clean, renewable electrical energy. Delivering a stable 5V output with a maximum current of 180mA, this solar panel is ideal for powering low-power electronic devices, DIY solar projects, battery charging applications, and educational experiments. Built using high-quality polycrystalline silicon solar cells, the module offers efficient energy conversion while maintaining reliable performance under sunlight. Its lightweight construction and compact dimensions make it easy to integrate into portable devices, robotics projects, solar-powered gadgets, and outdoor applications. Designed for durability, the panel features a weather-resistant construction suitable for outdoor use. With pre-drilled mounting holes, installation is quick and convenient for a wide range of renewable energy projects. ⭐ Features High-efficiency polycrystalline solar panel Stable 5V DC output Maximum output current of 180mA Maximum power output of 0.9W Compact size for portable projects Lightweight and easy to install Weather-resistant construction Pre-drilled mounting holes Suitable for outdoor applications Eco-friendly renewable energy source No external power source required Ideal for educational and DIY projects 📋 Technical Specifications Product Type: Mini Solar Panel Cell Module Cell Type: Polycrystalline Silicon Maximum Power Output: 0.9W Output Voltage: 5V DC Maximum Output Current: 180mA Panel Dimensions: 110 × 69 mm Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +85°C Construction: Weather-Resistant Connector: None (Solder Wire Connection) Weight: Approximately 15g 🔧 Applications Suitable for: DIY Solar Projects Solar Battery Chargers Mobile Phone Charging Projects Arduino Projects ESP32 & ESP8266 Projects Raspberry Pi Accessories Robotics Projects Solar Garden Lights Educational Science Experiments IoT Devices Portable Electronic Devices Renewable Energy Demonstrations Emergency Backup Power Projects Small DC Loads 📦 Package Includes 1 × 110 × 69mm 5V 180mA Mini Solar Panel Cell Module ⚠️ Note Output voltage and current depend on sunlight intensity and panel orientation. For battery charging applications, use a suitable solar charge controller or charging module. This panel is intended for low-power applications and may not provide sufficient power under low-light conditions. Product appearance may vary slightly depending on the manufacturing batch.
XH-M401 DC-DC Step Down Buck Converter Power Supply Module XL4016E1
[Step Down Buck Converter] ⚡ XL4016 12A DC-DC Step-Down Buck Converter Module Adjustable Power Supply 12A High Current • Adjustable Output • Up to 96% Efficiency • Ideal for Battery Charging & Power Supply Applications The XL4016 DC-DC Step-Down Buck Converter Module is a high-performance switching voltage regulator designed to efficiently convert higher DC input voltages into a stable, adjustable lower output voltage. Based on the XL4016 PWM Buck Converter IC, this module supports input voltages from 8V to 36V DC and provides an adjustable output voltage from 1.25V to 32V, making it suitable for a wide range of power supply applications. Capable of delivering up to 12A output current with conversion efficiencies of up to 96%, the module features built-in thermal shutdown, current limiting, and short-circuit protection for safe and reliable operation. Its compact design and excellent voltage regulation make it ideal for powering electronic projects, battery charging systems, LED lighting, industrial equipment, communication devices, and laboratory power supplies. ⭐ Features Based on the XL4016 high-performance buck converter IC Wide input voltage range of 8V–36V DC Adjustable output voltage from 1.25V–32V DC Supports output current up to 12A High conversion efficiency up to 96% Built-in thermal shutdown protection Built-in over-current protection Built-in output short-circuit protection Excellent line and load regulation Compact PCB design Suitable for battery charging and DC power applications 📋 Technical Specifications Product Type: DC-DC Buck Converter Module Model: XL4016 (XH-M401 / HW-439 / HW-674) Converter Type: Step-Down (Buck) Input Voltage: 8V–36V DC Output Voltage: 1.25V–32V DC (Adjustable) Maximum Output Current: 12A Maximum Conversion Efficiency: Up to 96% Load Regulation: ±0.5% Voltage Regulation: ±0.5% Switching Frequency: 180kHz Protection Features: Over-Current Protection Thermal Shutdown Protection Output Short-Circuit Protection PCB Size: 60 × 40 mm Operating Principle: PWM Step-Down Regulation 🔧 Applications Suitable for: Adjustable DC Power Supplies Lithium Battery Charging Lead Acid Battery Charging Solar Power Systems LED Drivers LCD Monitors LCD Televisions Portable Instruments Telecommunication Equipment Networking Equipment Robotics Projects Arduino Projects ESP32 Projects Industrial Automation DIY Electronics 📦 Package Includes 1 × XL4016 12A DC-DC Step-Down Buck Converter Module ⚠️ Note This is a step-down (buck) converter; the input voltage must always be higher than the required output voltage. Adjust the output voltage before connecting sensitive electronic devices. Product may be supplied as XH-M401, HW-439, or HW-674, depending on stock availability. All variants offer equivalent functionality.
ESP32-C3 Super Mini Development Board With Headers Pins
[ESP Modules] Ultra Compact • Wi-Fi & BLE 5.0 • USB Type-C • Perfect for IoT & Embedded Projects The ESP32-C3 Super Mini Development Board is a compact, feature-rich development board built around the powerful ESP32-C3 SoC from Espressif. Powered by a 32-bit RISC-V single-core processor running at up to 160MHz, it combines 2.4GHz Wi-Fi, Bluetooth 5.0 Low Energy (BLE), and low-power operation in an ultra-small form factor. Designed for IoT, smart home, wireless communication, automation, and embedded system development, the ESP32-C3 Super Mini offers 4MB Flash memory, 400KB SRAM, multiple GPIOs, ADC, PWM, UART, SPI, and I2C interfaces for connecting sensors, displays, relays, and other peripherals. The onboard USB Type-C interface simplifies programming and power supply, while the built-in USB-to-Serial functionality enables quick firmware uploading without requiring additional programmers. Fully compatible with Arduino IDE, ESP-IDF, PlatformIO, and MicroPython, it is suitable for beginners, students, makers, and professional developers. Its ultra-compact breadboard-friendly design makes it ideal for portable and space-constrained projects where performance, wireless connectivity, and energy efficiency are essential. Note: Programming, software configuration, driver installation, firmware flashing, and coding-related issues are not covered under return or replacement. Users are expected to troubleshoot software-related issues independently. ⭐ Features Powerful ESP32-C3 32-bit RISC-V processor CPU frequency up to 160MHz Built-in 2.4GHz Wi-Fi (802.11 b/g/n) Integrated Bluetooth 5.0 Low Energy (BLE) Ultra-compact Super Mini design Breadboard-friendly layout USB Type-C interface for programming and power 4MB onboard Flash memory 400KB SRAM Multiple GPIO, ADC, PWM, UART, SPI & I2C interfaces Low power consumption with Deep Sleep mode Onboard programmable LED Compatible with Arduino IDE, ESP-IDF, PlatformIO & MicroPython Ideal for IoT, automation, robotics, and wireless applications 📋 Technical Specifications Product Type: Development Board Board Model: ESP32-C3 Super Mini Microcontroller: ESP32-C3 Processor Architecture: 32-bit RISC-V CPU Frequency: Up to 160MHz Core: Single Core Flash Memory: 4MB SRAM: 400KB Wi-Fi Standard: IEEE 802.11 b/g/n (2.4GHz) Bluetooth: Bluetooth 5.0 Low Energy (BLE) Operating Voltage: 3.3V Input Voltage: 5V via USB Type-C or 3.3V External USB Interface: USB Type-C GPIO: Multiple Digital GPIO Pins Analog Input: Up to 6 ADC Channels PWM: Supported UART: Supported SPI: Supported I2C: Supported USB-to-Serial: Onboard Onboard LED: User Programmable (GPIO8) Power Consumption: Ultra Low (Deep Sleep ≈ 43µA) Dimensions: Approx. 22.5 × 18 mm Headers: Pre-Soldered 🔧 Applications Suitable for: Internet of Things (IoT) Smart Home Automation Wireless Sensor Networks Home Automation Systems Bluetooth Low Energy Devices Wi-Fi Enabled Controllers Robotics Projects Data Logging Systems Remote Monitoring Industrial Automation Portable Embedded Devices Educational Learning DIY Electronics Projects Wearable Electronics Rapid Prototyping 📦 Package Includes 1 × ESP32-C3 Super Mini Development Board Pin Headers ⚠️ Note Programming, firmware installation, software configuration, and driver-related issues are not covered under warranty, return, or replacement. Please verify board compatibility and install the appropriate development environment before programming. Soldered and non-soldered header pin depend on stock
Winway 18650 Lithium-Ion Rechargeable Battery 3.7V 2600mAh 9.62Wh
[Lithium Battery Cell] The Winway 18650 Lithium-Ion Rechargeable Battery is a high-performance cylindrical Li-ion cell designed to deliver reliable and long-lasting power for a wide range of electronic devices. With a nominal voltage of 3.7V, 2600mAh capacity, and 9.62Wh energy rating, it provides consistent power output for both high-drain and low-drain applications. Manufactured using premium lithium-ion cell technology, this battery offers excellent energy density, stable discharge performance, and long cycle life. Its standard 18650 form factor makes it compatible with most battery holders, chargers, and devices designed for 18650 cells. The Winway 2600mAh battery is widely used in rechargeable flashlights, emergency lights, battery packs, power banks, Bluetooth speakers, portable fans, solar lighting, DIY electronics, robotics, and various battery-operated devices. Designed for durability and dependable performance, this battery delivers excellent backup time while maintaining stable voltage throughout the discharge cycle. ⭐ Features High-quality 18650 Lithium-Ion rechargeable battery 2600mAh high-capacity cell Nominal voltage of 3.7V Energy rating of 9.62Wh Stable discharge performance High energy density Long charge and discharge cycle life Lightweight and compact cylindrical design Suitable for battery pack assembly Compatible with standard 18650 battery holders and chargers 📋 Technical Specifications Product Type: Lithium-Ion Rechargeable Battery Brand: Winway Battery Model: 18650 Nominal Voltage: 3.7V Nominal Capacity: 2600mAh Energy: 9.62Wh Battery Chemistry: Lithium-Ion (Li-ion) Cell Type: Rechargeable Form Factor: Cylindrical 18650 Diameter: Approx. 18mm Length: Approx. 65mm Weight: Approx. 45g Color: Green Rechargeable: Yes Made In: India Pack Quantity: 1 Piece 🔧 Applications Suitable for: Rechargeable Flashlights Emergency Lights Power Banks Bluetooth Speakers Portable Fans Solar Lighting Systems DIY Battery Packs Robotics Projects Arduino Projects ESP32 Projects Electronic Toys Portable Electronic Devices Medical Equipment (Compatible Models) Industrial Electronic Equipment 📦 Package Includes 1 × Winway 18650 Lithium-Ion Rechargeable Battery 3.7V 2600mAh ⚠️ Safety Instructions Use only a compatible Li-ion battery charger. Do not short-circuit, puncture, crush, or disassemble the battery. Do not expose the battery to fire, excessive heat, or water. Observe correct polarity during installation. Do not overcharge or over-discharge the battery. Store in a cool, dry place away from direct sunlight.
DHT11 Digital Temperature and Humidity Sensor Module 3.3V-5V for Arduino & Raspberry Pi
[Temperature Sensor] The DHT11 Digital Temperature and Humidity Sensor Module is a reliable and cost-effective sensor designed to measure ambient temperature and relative humidity. It combines a capacitive humidity sensing element and a thermistor with a built-in digital signal processing unit, providing calibrated digital output directly to microcontrollers. In addition, the DHT11 offers stable performance and excellent long-term reliability, making it suitable for environmental monitoring and automation applications. As a result, it is widely used in weather stations, smart home systems, greenhouse monitoring, HVAC systems, and educational electronics projects. Because the module includes the required pull-up resistor, interfacing with microcontrollers becomes simple and straightforward. Furthermore, only three connections are required: VCC, GND, and Data Output. The sensor operates from a wide voltage range of 3.3V to 5.5V DC, ensuring compatibility with Arduino, Raspberry Pi, ESP32, STM32, NodeMCU, and other development boards. Moreover, readily available libraries and example codes allow quick integration into projects. The DHT11 utilizes advanced digital signal acquisition technology and dedicated temperature-humidity sensing techniques to ensure accurate and dependable measurements. 🔹 Key Features Measures temperature and humidity simultaneously Calibrated digital signal output Low power consumption High reliability and long-term stability Capacitive humidity sensing technology Built-in pull-up resistor on module Compatible with Arduino, ESP32, Raspberry Pi, and STM32 Simple 3-wire interface Easy integration into IoT projects Compact and lightweight design 🔹 Technical Specifications Sensor Model: DHT11 Operating Voltage: 3.3V – 5.5V DC Output Type: Digital Serial Output Humidity Measurement Range: 20%RH – 90%RH Humidity Accuracy: ±5%RH Humidity Resolution: 1%RH Temperature Measurement Range: 0°C – 50°C Temperature Accuracy: ±2°C Temperature Resolution: 1°C Sampling Rate: 1Hz (One Reading Per Second) Long-Term Stability: < ±1%RH/Year Interchangeability: Fully Interchangeable Sensor Technology: Capacitive Humidity Sensor + Thermistor 🔹 Pin Configuration Pin 1 (VCC): 3.3V – 5.5V DC Power Supply Pin 2 (DATA): Digital Serial Data Output Pin 3 (GND): Ground 🔹 Applications This sensor module is suitable for: Arduino projects Raspberry Pi projects ESP32 projects IoT systems Weather monitoring stations Smart home automation Greenhouse monitoring HVAC control systems Environmental monitoring Educational electronics projects 🔹 Package Includes 1 × DHT11 Digital Temperature and Humidity Sensor Module
AC-DC 100-220V to 12V 1.3A 15.6W SMPS Power Supply Module Switching Power Board
[SMPS] The AC-DC 100-220V to 12V 1.3A 15.6W SMPS Power Supply Module is a compact switching power supply designed to provide a stable and regulated 12V DC output from standard AC mains input. With high conversion efficiency and built-in protection features, it is suitable for a wide range of electronic and industrial applications. In addition, the module accepts a broad 100V to 220V AC input range, making it compatible with various power systems. As a result, it can be used in DIY electronics, automation systems, LED lighting projects, CCTV installations, and embedded devices. Because of its efficient SMPS design, the module offers low power loss and reduced heat generation. Furthermore, the compact PCB layout allows easy integration into projects where space is limited. The power supply includes protection against overcurrent and short circuits, helping improve operational safety and reliability. Moreover, the regulated 12V output ensures stable performance for connected devices and electronic circuits. This power module is widely used in LED strips, surveillance systems, smart home devices, industrial control systems, communication equipment, and DIY electronics projects. 🔹 Key Features Wide AC input voltage range Stable regulated 12V DC output Maximum output current of 1.3A High-efficiency switching power supply design Compact and lightweight module Built-in overcurrent protection Built-in short-circuit protection Low heat generation Reliable and long-lasting performance Easy integration into electronic projects 🔹 Technical Specifications Product Type: AC-DC SMPS Power Supply Module Input Voltage Range: 100V – 220V AC Input Frequency: 50Hz – 60Hz Output Voltage: 12V DC Output Current: 1.3A Output Power: 15.6W Efficiency: Up to 86% Overcurrent Protection: Yes Short Circuit Protection: Yes Operating Temperature: -20°C to +80°C Dimensions: 96 × 32 × 16 mm Weight: Approximately 43g 🔹 Applications This SMPS module is suitable for: LED strip lighting CCTV camera systems Smart home devices Automation projects Industrial control systems Communication equipment Arduino projects ESP32 and IoT systems DIY electronics projects 🔹 Package Includes 1 × AC-DC 100-220V to 12V 1.3A 15.6W SMPS Power Supply Module
Micro USB 5V 1A Step-Up Boost Converter Power Bank Charging Module for 3.7V Lithium Battery
[Li-ion Rechargeable Battery Charger, Lithium Battery Protection Board] The Micro USB 5V 1A Step-Up Boost Converter Power Bank Charging Module is a versatile and reliable solution for building portable power banks and battery-powered electronic projects. Designed for use with a single 3.7V lithium-ion battery, the module integrates battery charging, protection circuitry, and a high-efficiency boost converter on a single compact PCB. In addition, the onboard boost converter efficiently converts the battery voltage to a regulated 5V USB output, making it suitable for charging smartphones, microcontroller projects, portable gadgets, and USB-powered devices. As a result, users can create compact and dependable portable power solutions with minimal external components. Because of its integrated protection functions, the module safeguards the battery against overcharging, over-discharging, and short circuits. Furthermore, LED status indicators provide clear visual feedback regarding charging and operating conditions. The compact design allows easy integration into custom battery packs, DIY power banks, portable electronics, and embedded systems. Moreover, the Micro USB charging interface ensures compatibility with widely available charging cables and adapters. 🔹 Key Features Micro USB charging interface Integrated lithium battery charging circuit Built-in 5V step-up boost converter Stable 5V USB output Supports single-cell 3.7V lithium-ion batteries Overcharge protection Over-discharge protection Short-circuit protection High conversion efficiency LED charging status indicators Compact and lightweight design 🔹 Technical Specifications Product Type: Power Bank Charging Module Charging Interface: Micro USB Input Voltage: 3.7V Lithium Battery Output Voltage: 5V USB Standard Maximum Output Current: 1A Supported Battery Type: Single Cell Lithium-Ion Battery (3.7V) Efficiency: Up to 92% Quiescent Current: Less than 100µA Charging Protection: Overcharge, Over-discharge, Short Circuit Protection Overcharge Protection Voltage: 4.2V Over-discharge Protection Voltage: 2.5V Charging Cut-off Current: 50mA Module Dimensions: Approx. 36mm × 17mm × 7mm PCB Thickness: 1.6mm Operating Temperature: -40°C to +85°C Status Indication: LED Charging Indicators 🔹 Applications This charging module is suitable for: DIY power banks Portable USB chargers Lithium battery projects Arduino power supplies ESP32 and IoT devices Portable electronics Rechargeable battery systems USB-powered gadgets 🔹 Package Includes 1 × Micro USB 5V 1A Step-Up Boost Converter Lithium Battery Charging and Protection Module
3.7V BMS 1S 2A 18650 Lithium Battery Protection Board
[Lithium Battery Protection Board] The 1S 3.7V Lithium Battery Protection Board (BMS/PCM) is a compact battery management module designed specifically for single-cell lithium-ion batteries such as 18650, 14500, and similar 3.7V rechargeable cells. It continuously monitors battery voltage and current to ensure safe charging and discharging operations. In addition, the module provides multiple layers of protection including overcharge, over-discharge, overcurrent, and short-circuit protection. As a result, it helps extend battery life and improves the safety of battery-powered devices. Because of its compact size, the protection board can be easily integrated into DIY battery packs, portable electronics, LED lighting systems, and rechargeable battery projects. Furthermore, the board uses nickel-strip compatible terminals for easy battery pack assembly. The protection circuit is designed for long-term reliable operation and helps prevent damage caused by improper charging or excessive current draw. Moreover, it offers high voltage detection accuracy for improved battery management performance. ⚠️ Note: This protection board is designed for 3.7V Lithium-Ion batteries only and is not suitable for LiFePO4 batteries. 🔹 Key Features Single-cell (1S) lithium battery protection board Suitable for 18650 lithium-ion batteries Overcharge protection Over-discharge protection Overcurrent protection Short-circuit protection High voltage detection accuracy Compact and lightweight design Easy installation and integration Long operational life 🔹 Pin Configuration B+ : Battery Positive Terminal B- : Battery Negative Terminal P+ : Charge / Discharge Positive Terminal P- : Charge / Discharge Negative Terminal 🔹 Technical Specifications Product Type: Lithium Battery Protection Module (BMS/PCM) Battery Configuration: 1S (Single Cell) Compatible Battery Type: 3.7V Lithium-Ion (18650, 14500, etc.) Operating Voltage Range: 3.2V – 4.2V Overcharge Detection Voltage: 4.25 ± 0.05V Overcharge Release Voltage: 4.23 ± 0.05V Over-discharge Detection Voltage: 2.54 ± 0.1V Continuous Charge Current: 2A Continuous Discharge Current: 2A Maximum Supported Current: 2A – 5A Protection Functions: Overcharge, Over-discharge, Overcurrent, Short Circuit Terminal Type: Nickel Strip Compatible Board Life Expectancy: More than 20,000 Operating Hours 🔹 Applications This protection board is suitable for: 18650 battery packs Rechargeable lithium battery projects DIY power banks Portable electronics LED lighting systems Battery-powered devices Robotics projects Arduino and ESP32 power systems 🔹 Important Notes Not suitable for LiFePO4 batteries Not recommended for high-current motors above 4A Not suitable for electric bicycles or high-power battery packs Ensure correct polarity during installation Use only with compatible lithium-ion cells 🔹 Package Includes 1 × 1S 3.7V 2A Lithium-Ion Battery Protection Board (BMS/PCM)
RS-12 Blue 2 Pin Mini Rocker Switch – 6A 250V ON/OFF Standard SPDT Plastic Switch
[Mechanical Switches] 🔵 RS-12 Blue 2 Pin Mini Rocker Switch 6A 250V ON/OFF Panel Mount Switch Compact Design • 6A Current Rating • Durable Iron Contacts • Reliable Power Switching The RS-12 Blue 2 Pin Mini Rocker Switch is a high-quality, compact ON/OFF panel mount switch designed for reliable switching in electrical and electronic applications. Manufactured using durable materials and iron contacts, this rocker switch ensures dependable performance, smooth operation, and long service life. With a 6A @ 250V AC rating, it is suitable for controlling AC or DC power in home appliances, power supplies, battery chargers, DIY electronics, industrial equipment, automation systems, and control panels. Its 2-pin SPST (Single Pole Single Throw) configuration provides simple ON/OFF switching, while the compact snap-in design allows easy installation even in limited panel space. The attractive blue rocker actuator provides clear ON/OFF indication while giving electronic equipment a modern and professional appearance. Designed for up to 100,000 mechanical operations, the RS-12 rocker switch is an excellent choice for both professional and hobby electronics projects. ⭐ Features High-quality RS-12 mini rocker switch Compact 2-pin panel mount design Simple ON/OFF switching operation Rated for 6A at 250V AC Durable plastic housing Iron contact terminals Smooth and reliable switching performance Long mechanical life up to 100,000 cycles Easy snap-in installation Suitable for AC and DC switching Ideal for industrial, commercial, and DIY applications 📋 Technical Specifications Product Name: RS-12 Blue Mini Rocker Switch Product Type: Rocker Switch Switch Function: ON/OFF Switch Configuration: SPST (Single Pole Single Throw) Number of Pins: 2 Rated Voltage: 250V AC Rated Current: 6A Power Rating: 250V / 6A Terminal Type: Solder Terminals Contact Material: Iron Housing Material: Plastic Illumination: Non-Illuminated Mechanical Life: Up to 100,000 Operations Mounting Type: Panel Mount (Snap-In) Color: Blue Rocker with Black Housing Response Time: Instant RoHS Compliance: No 🔧 Applications Suitable for: Home Appliances Power Supplies Battery Chargers DIY Electronics Arduino Projects Raspberry Pi Projects ESP32 Projects Robotics Industrial Control Panels Automation Equipment Audio Equipment LED Lighting Systems Electronic Toys Test Equipment Consumer Electronics Repair & Maintenance 📦 Package Includes 1 × RS-12 Blue 2 Pin Mini Rocker Switch ⚠️ Note Verify the switch rating before connecting high-voltage or high-current loads. Disconnect power before installation or maintenance. Product color, markings, and dimensions may vary slightly depending on the manufacturing batch.
RS-12 Yellow 2 Pin Mini Rocker Switch 6A 250V ON/OFF Standard SPDT Plastic Switch
[Mechanical Switches] 🟡 RS-12 Yellow 2 Pin Mini Rocker Switch 6A 250V ON/OFF Panel Mount Switch Compact Design • 6A Current Rating • Durable Iron Contacts • Reliable Power Switching The RS-12 Yellow 2 Pin Mini Rocker Switch is a high-quality, compact ON/OFF panel mount switch designed for reliable switching in electrical and electronic applications. Manufactured using durable materials and iron contacts, this rocker switch ensures dependable performance, smooth operation, and long service life. With a 6A @ 250V AC rating, it is suitable for controlling AC or DC power in home appliances, power supplies, battery chargers, DIY electronics, industrial equipment, automation systems, and control panels. Its 2-pin SPST (Single Pole Single Throw) configuration provides simple ON/OFF switching, while the compact snap-in design allows easy installation even in limited panel space. The bright yellow rocker actuator provides clear visibility and easy identification of the switch, making it an excellent choice for control panels, machinery, DIY electronics, and industrial equipment. Designed for up to 100,000 mechanical operations, the RS-12 rocker switch delivers reliable performance for long-term use. ⭐ Features High-quality RS-12 mini rocker switch Compact 2-pin panel mount design Simple ON/OFF switching operation Rated for 6A at 250V AC Durable plastic housing Iron contact terminals Smooth and reliable switching performance Long mechanical life up to 100,000 cycles Easy snap-in installation Suitable for AC and DC switching Ideal for industrial, commercial, and DIY applications 📋 Technical Specifications Product Name: RS-12 Yellow Mini Rocker Switch Product Type: Rocker Switch Switch Function: ON/OFF Switch Configuration: SPST (Single Pole Single Throw) Number of Pins: 2 Rated Voltage: 250V AC Rated Current: 6A Power Rating: 250V / 6A Terminal Type: Solder Terminals Contact Material: Iron Housing Material: Plastic Illumination: Non-Illuminated Mechanical Life: Up to 100,000 Operations Mounting Type: Panel Mount (Snap-In) Color: Yellow Rocker with Black Housing Response Time: Instant RoHS Compliance: No 🔧 Applications Suitable for: Home Appliances Power Supplies Battery Chargers DIY Electronics Arduino Projects Raspberry Pi Projects ESP32 Projects Robotics Industrial Control Panels Automation Equipment Audio Equipment LED Lighting Systems Electronic Toys Test Equipment Consumer Electronics Repair & Maintenance 📦 Package Includes 1 × RS-12 Yellow 2 Pin Mini Rocker Switch ⚠️ Note Verify the switch rating before connecting high-voltage or high-current loads. Disconnect power before installation or maintenance. Product color, markings, and dimensions may vary slightly depending on the manufacturing batch.
TC4056 Type-C 1A Lithium Battery Charging Module 5V USB-C 3.7V Li-ion LiPo Charger Board
[Li-ion Rechargeable Battery Charger, Lithium Battery Protection Board] Product Description The TC4056 Type-C Lithium Battery Charging Module is a compact, efficient, and reliable solution for charging 3.7V lithium-ion and lithium polymer batteries. Designed with a modern USB Type-C input, this module ensures easy compatibility with standard chargers and power sources. It uses a proven CC/CV (Constant Current / Constant Voltage) charging algorithm, which ensures safe charging, longer battery life, and stable performance. The module is ideal for DIY electronics, power banks, portable devices, and embedded systems. With intelligent charging management, automatic cut-off, and pre-charge functionality, the TC4056 module provides complete protection and efficient charging for your batteries. ⚡ Key Features 🔋 Safe & Efficient CC/CV ChargingProvides stable and optimized charging for lithium batteries. 🔌 Type-C USB InputEasy to use with mobile chargers, USB adapters, and power banks. ⚡ Stable 1A Charging CurrentDefault charging current of 1A for fast and reliable performance. 🔴🔵 LED Charging Indicators Red LED: Charging Blue LED: Fully Charged 🧩 Compact & Lightweight DesignPerfect for space-constrained and portable applications. 🛠️ Easy IntegrationSimple connections make it beginner-friendly and ideal for DIY use. 🔄 Smart Charging Features 🔋 Automatic Charge TerminationStops charging when current drops to 100mA after full charge, protecting battery health. 🔄 Auto Recharge FunctionCharging restarts automatically when battery voltage falls below 4.05V. 🪫 Pre-Charge ModeWhen battery voltage is below 2.9V, the module charges safely at 100mA. 📊 Specifications Specification Description Charging IC TC4056 Input Voltage 5V DC (Type-C USB) Charging Current 1A (default, adjustable) Battery Type 3.7V Li-ion / Li-Po Cut-off Voltage 4.2V Charging Method CC/CV Indicators Red (Charging), Blue (Full) 🔧 Applications 🔋 18650 Battery Charging🔌 DIY Power Banks🔧 Arduino / ESP32 Projects🎮 Portable Electronics💡 Rechargeable LED Projects📦 Backup Power Systems 📦 Package Includes 1 × TC4056 Type-C Lithium Battery Charging Module
Type-C USB 5V 2A Step-Up Boost Converter with USB Charger
[Li-ion Rechargeable Battery Charger, Step UP Buck Converter] Build your own portable power solutions with the Type-C USB 5V 2A Step-Up Boost Converter Power Bank Module — a compact and efficient charging solution designed for DIY power banks and USB-powered devices. This versatile module supports battery charging and 5V boost output, allowing you to convert battery voltage into a stable 5V USB output for powering smartphones, microcontrollers, and other USB devices. Equipped with a Type-C input, high-efficiency boost circuit, and intelligent power management, this module ensures reliable performance, fast charging, and safe operation. It also supports simultaneous charging and discharging, making it perfect for uninterrupted power supply applications. Key Features 🔋 2-in-1 Charging + Boost ModuleCharge your lithium battery while simultaneously providing a stable 5V output. ⚡ Stable 5V 2A OutputDelivers consistent power for USB devices like smartphones, Arduino, ESP32, and more. 🔌 Type-C USB InputModern and widely compatible input for easy charging (5V–5.5V). 🔄 High Efficiency Boost Conversion (Up to 92.5%)Minimizes power loss and improves battery life. 🧠 Smart Power ManagementAutomatically controls charging cycles, output switching, and battery protection. 🔘 External Button Control Support Short press: Turn ON output & display Double press: Turn OFF output 🔧 DIY Friendly DesignIncludes USB-A solder pads for custom builds and integrations. Working Functions 🔹 Auto shutdown when load current < 50mA🔹 Auto stop charging when current drops to 100mA🔹 Auto recharge when battery voltage < 4.1V🔹 Pre-charge mode below 2.8V (180mA safe charging)🔹 Supports charging while discharging Specifications Specification Description Input Voltage 5V – 5.5V (Type-C USB) Charging Cut-off Voltage 4.2V / 4.35V ±0.5% Charging Current 2.4A ±5% Boost Output Voltage 5V – 5.15V Output Current Up to 2A Efficiency Up to 92.5% Output Ripple 100mV Quiescent Current 30µA Material Metal + Plastic Applications 🔋 DIY Power Banks📱 Mobile Charging Projects🔧 Arduino / ESP32 Power Supply🔌 USB Device Power Modules🚗 Portable Electronics🧪 Embedded Systems & Prototyping Package Includes 1 × Type-C USB 5V 2A Step-Up Boost Converter Power Bank Module
Out of stock1.3 Inch I2C IIC 128×64 OLED Display Module – White
[LED/LCD Display Module] The 1.3 Inch I2C 128×64 OLED Display Module is a compact, high-contrast display designed for Arduino, ESP32, NodeMCU, Raspberry Pi, and other microcontroller-based projects. This module uses OLED (Organic Light Emitting Diode) technology, providing bright white pixels with excellent contrast and wide viewing angles. Powered by the SSH1106 controller chip, the display offers smooth graphics rendering and reliable performance. With a resolution of 128×64 pixels, it can display text, graphics, icons, and sensor data clearly even in small embedded systems. The module communicates using the I2C (IIC) interface, requiring only 4 pins (VCC, GND, SDA, SCL), which helps save valuable GPIO pins on your microcontroller. It operates within a voltage range of 3.3V to 5V, making it compatible with most development boards. Unlike traditional LCD displays, OLED displays do not require a backlight because each pixel emits its own light. This results in lower power consumption, better contrast, and faster response times. Due to its compact size, lightweight design, and simple wiring, the display module is ideal for IoT devices, sensor monitors, battery indicators, portable electronics, robotics projects, and DIY electronics applications. ⭐ Features 1.3 Inch OLED Display Module 128 × 64 pixel resolution White pixel display SSH1106 display controller I2C / IIC communication interface Requires only 4 pins High contrast and wide viewing angle Low power consumption Compatible with Arduino, ESP32, NodeMCU, Raspberry Pi Ideal for embedded and IoT projects 🔧 Technical Specifications Display Size: 1.3 inch Resolution: 128 × 64 pixels Controller Chip: SSH1106 Display Area: 34.5 × 19 mm Interface Type: IIC / I2C Pixel Color: White Driving Voltage: 3.3V – 5V Operating Temperature: -40°C to 70°C Physical Dimensions Length: 35.5 mm Width: 33.5 mm Height: 4 mm Weight: 7 g 📦 Package Includes 1 × 1.3 Inch 128×64 OLED Display Module (White)