All products · 50 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Out of stockUbiquiti UniFi U6-LR Long-Range AP
WiFi 6 access point, 4x4 MU-MIMO, indoor + outdoor, PoE+. UniFi controller managed.
Almirah Wardrobe Switch – 250V AC 6A Momentary Push-to-Off Switch
[Mechanical Switches] Almirah Wardrobe Switch – 250V AC 6A Momentary Push-to-Off Switch The Almirah Switch is a compact single-pole momentary push-to-off switch designed for use in almirahs, cupboards, wardrobes, cabinets, and furniture lighting applications. It provides instantaneous switching action and is suitable for applications where an electrical circuit needs to be switched according to the opening or closing of a cabinet or door. The switch features a high-grade polycarbonate body and brass contacts, providing reliable electrical conduction and durability for regular use. Its compact design is intended to fit standard almirah cutouts and supports panel or surface mounting with screw-type wire terminals. With a rating of 250V AC and 6A, an IP20 protection level, and a mechanical life of more than 10,000 operations, this switch is suitable for indoor furniture and cabinet applications. ⭐ Key Features 250V AC rated voltage 6A current rating Single-pole design Momentary push-button operation Push-to-Off action Instantaneous response High-grade polycarbonate construction Brass electrical contacts Compact design for standard almirah cutouts Panel or surface mounting Screw-type wire terminals Glossy white finish Mechanical life of >10,000 operations IP20 protection RoHS compliant 📋 Technical Specifications Product Type: Almirah Switch Switch Type: Momentary Actuator Type: Push Button Circuit Type: Single Circuit Number of Poles: Single Pole Rated Voltage: 250V AC Maximum Voltage: 250V AC Current Rating: 6A Maximum Current: 6A Response Time: Instantaneous Automation Grade: Manual Material: High-Grade Polycarbonate Contact Material: Brass Wire Terminal: Screw-Type Mounting Type: Panel / Surface Mount Protection Level: IP20 Finish Type: Glossy Color: White Operating Temperature: -10°C to +50°C Temperature Range: -10°C to +50°C Mechanical Life: >10,000 Operations Insulation Resistance: 100MΩ Minimum @ 500V DC Contact Resistance: 50mΩ Stroke: Standard Push-to-Off Action Size: Compact; fits standard almirah cutout Weight: Approximately 20g Number of Modules: Single Module UV Stabilized: Normal RoHS Compliance: Yes 🔌 Operation The switch provides a push-to-off momentary action. It is designed for applications where the switch operates automatically through the physical movement of a cupboard, wardrobe, almirah, or cabinet door. 🔧 Applications Almirah Lighting Cupboard Lighting Wardrobe Lighting Cabinet Lighting Furniture Lighting Storage Cabinet Applications Office Cabinets Home Furniture Control Panels Indoor Electrical Applications 🛠️ Installation The switch can be installed using its panel or surface mounting arrangement. Fit the switch into a suitable cutout and secure it firmly. Connect the wires to the screw-type terminals with the power supply switched off during installation. 📦 Package Includes 1 × Almirah Switch – White, 250V AC 6A ⚠️ Precautions Disconnect the power supply before installation or wiring. Do not exceed the 250V AC / 6A rating. Ensure screw terminals are tightened securely. Use suitable wiring for the connected load. Intended primarily for indoor applications. IP20 protection does not provide waterproof protection. Do not use in wet or exposed outdoor environments. Replace the switch if contacts become damaged or operation becomes unreliable. ❓ Frequently Asked Questions Q: What is the voltage and current rating?A: The switch is rated for 250V AC and 6A. Q: What type of switch is it?A: It is a single-pole momentary push-to-off switch. Q: Where can it be installed?A: It is designed for almirahs, cupboards, wardrobes, cabinets, and similar furniture applications. Q: What material is used for the switch?A: The body is made from high-grade polycarbonate, with brass contacts. Q: What is the mechanical life?A: The supplied specification states a mechanical life of more than 10,000 operations.
107 × 61mm 5V 180mA Mini Solar Panel Cell Module
[Solar Panel] ☀️ 107 × 61mm 5V 180mA Mini Solar Panel Cell Module (0.9W) 5V Output • 180mA Current • Polycrystalline Solar Cell • Compact & Lightweight • DIY Solar Projects The 107 × 61mm Mini Solar Panel Cell Module is a compact and efficient photovoltaic module designed to convert sunlight into clean and renewable electrical energy. Delivering a stable 5V output with a maximum current of 180mA, this solar panel is ideal for powering small electronic devices, battery charging circuits, educational projects, and DIY solar applications. Built using high-quality polycrystalline silicon solar cells, the panel provides efficient energy conversion with reliable performance under direct sunlight. Its compact size and lightweight construction make it easy to integrate into portable electronics, robotics, IoT devices, and renewable energy projects. Designed with a durable, weather-resistant construction, the module is suitable for both indoor demonstrations and outdoor applications. Pre-drilled mounting holes allow quick installation on enclosures, backpacks, models, and custom solar-powered devices. ⭐ Features High-efficiency polycrystalline solar panel Stable 5V DC output Maximum output current of 180mA Maximum power output of 0.9W Compact and lightweight design Efficient solar energy conversion Weather-resistant construction Pre-drilled mounting holes Easy integration into DIY projects Eco-friendly renewable energy source Maintenance-free operation Suitable for educational and hobby applications 📋 Technical Specifications Product Type: Mini Solar Panel Cell Module Panel Dimensions: 107 × 61 mm Cell Type: Polycrystalline Silicon Maximum Power Output: 0.9W Output Voltage: 5V DC Maximum Output Current: 180mA Conversion Efficiency: Approx. 17% Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +85°C Construction: Waterproof, Weather-Resistant Mounting: Pre-Drilled Mounting Holes Material: High-Quality Polycrystalline Silicon Weight: Approx. 16g 🔧 Applications Suitable for: DIY Solar Projects Solar Battery Chargers Mobile Charging Projects Arduino Projects ESP32 Projects Raspberry Pi Accessories Robotics IoT Devices Solar Garden Lights Educational Science Experiments Portable Electronics Renewable Energy Demonstrations Emergency Backup Projects Small DC Power Applications 📦 Package Includes 1 × 107 × 61mm 5V 180mA Mini Solar Panel Cell Module ⚠️ Note Output voltage and current depend on sunlight intensity, panel angle, and environmental conditions. For battery charging applications, use a suitable charge controller or charging module. Designed for low-power electronic projects and educational use. Product appearance and dimensions may vary slightly depending on the manufacturing batch.
110 × 69mm 5V 180mA Mini Solar Panel Cell Module
[Solar Panel] ☀️ 110 × 69mm 5V 180mA Mini Solar Panel Cell Module (0.9W) 5V Output • 180mA Current • 0.9W Power • Polycrystalline Solar Cell • Compact & Lightweight The 110 × 69mm 5V 180mA Mini Solar Panel Cell Module is a compact and efficient photovoltaic module designed to convert sunlight into clean, renewable electrical energy. Delivering a stable 5V output with a maximum current of 180mA, this solar panel is ideal for powering low-power electronic devices, DIY solar projects, battery charging applications, and educational experiments. Built using high-quality polycrystalline silicon solar cells, the module offers efficient energy conversion while maintaining reliable performance under sunlight. Its lightweight construction and compact dimensions make it easy to integrate into portable devices, robotics projects, solar-powered gadgets, and outdoor applications. Designed for durability, the panel features a weather-resistant construction suitable for outdoor use. With pre-drilled mounting holes, installation is quick and convenient for a wide range of renewable energy projects. ⭐ Features High-efficiency polycrystalline solar panel Stable 5V DC output Maximum output current of 180mA Maximum power output of 0.9W Compact size for portable projects Lightweight and easy to install Weather-resistant construction Pre-drilled mounting holes Suitable for outdoor applications Eco-friendly renewable energy source No external power source required Ideal for educational and DIY projects 📋 Technical Specifications Product Type: Mini Solar Panel Cell Module Cell Type: Polycrystalline Silicon Maximum Power Output: 0.9W Output Voltage: 5V DC Maximum Output Current: 180mA Panel Dimensions: 110 × 69 mm Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +85°C Construction: Weather-Resistant Connector: None (Solder Wire Connection) Weight: Approximately 15g 🔧 Applications Suitable for: DIY Solar Projects Solar Battery Chargers Mobile Phone Charging Projects Arduino Projects ESP32 & ESP8266 Projects Raspberry Pi Accessories Robotics Projects Solar Garden Lights Educational Science Experiments IoT Devices Portable Electronic Devices Renewable Energy Demonstrations Emergency Backup Power Projects Small DC Loads 📦 Package Includes 1 × 110 × 69mm 5V 180mA Mini Solar Panel Cell Module ⚠️ Note Output voltage and current depend on sunlight intensity and panel orientation. For battery charging applications, use a suitable solar charge controller or charging module. This panel is intended for low-power applications and may not provide sufficient power under low-light conditions. Product appearance may vary slightly depending on the manufacturing batch.
5V 100mA 0.5W Mini Solar Panel 70x70mm Polycrystalline DIY Solar Cell Charger
[Solar Panel] The 5V 100mA 0.5W Mini Solar Panel is a compact and efficient photovoltaic module designed for small solar power applications and DIY renewable energy projects. Made using high-quality polycrystalline silicon, this solar panel converts sunlight into usable electrical energy with reliable performance. In addition, the panel delivers a stable 5V output with up to 100mA current, making it suitable for charging small batteries, powering low-power devices, and educational electronics projects. As a result, it is widely used in portable solar applications, science experiments, and DIY electronic systems. Because of its lightweight and compact design, the panel can be easily installed in limited spaces. Furthermore, the durable epoxy surface improves protection against moisture and environmental conditions, helping ensure long-term outdoor use. The solar panel features excellent low-light performance and high conversion efficiency for improved energy generation. Moreover, the exposed copper connection pads allow easy soldering and quick integration into custom electronic projects. This mini photovoltaic panel is commonly used in solar DIY kits, battery chargers, garden lighting, educational projects, portable electronics, and renewable energy systems. 🔹 Key Features High-efficiency polycrystalline solar panel Stable 5V output voltage Lightweight and compact design Excellent low-light performance Durable epoxy-coated surface Easy soldering connection pads Waterproof and long-lasting structure Suitable for DIY and educational projects 🔹 Technical Specifications Product Type: Mini Solar Panel Material: Polycrystalline Silicon Output Voltage: 5V Output Current: 0–100mA Rated Power: 0.5W Dimensions: 70mm × 70mm × 3mm Surface Type: Epoxy Coated Connection Type: Copper Tape Pads Application Type: Solar Charging / DIY Projects 🔹 Applications This mini solar panel is suitable for many applications, including: DIY solar projects Small battery charging Educational electronics kits Portable solar devices Garden lighting systems Renewable energy experiments Low-power electronics projects 🔹 Package Includes 1 × 5V 100mA 0.5W Mini Epoxy Solar Panel
3A 250V Blue Push Button Switch Momentary Type NO Lock Push Switch
[Mechanical Switches] The 3A 250V Blue Push Button Momentary Switch is a compact and reliable push-type switch designed for temporary ON/OFF control applications. It features a momentary non-locking mechanism, which means the switch remains active only while being pressed. In addition, the switch uses a Normally Open (NO) contact configuration. As a result, the electrical circuit closes only when the button is pressed and automatically returns to its original state after release. Because of its compact size and durable plastic construction, the switch is suitable for many electronic and industrial applications. Furthermore, the bright blue button improves visibility and allows easy identification during operation. The switch supports loads up to 3A at 250VAC, making it suitable for both AC and low-voltage DC control circuits. Moreover, the panel-mount design allows quick and secure installation into control panels and electronic enclosures. This push button switch is widely used in DIY electronics, industrial automation, robotics systems, alarm systems, doorbell circuits, and power control applications. 🔹 Key Features Momentary push button operation Normally Open (NO) contact type Non-locking push switch design Compact and lightweight body Bright blue push button cap Easy panel mounting installation Stable and reliable switching operation Suitable for AC and DC applications 🔹 Technical Specifications Switch Type: Momentary Push Button Switch Contact Type: Normally Open (NO) Operation Type: Non-Locking (Push Only) Rated Voltage: 250V AC Rated Current: 3A Button Color: Blue Mounting Type: Panel Mount Mounting Hole Diameter: Approx. 12mm Button Diameter: Approx. 12mm Total Length: Approx. 28mm Body Material: Plastic Contact Material: Silver-Plated Metal Terminal Type: 2 Pin Solder/Quick Connect Operating Temperature: -25°C to +85°C 🔹 Applications This push button switch is suitable for many electronic and electrical applications, including: DIY electronics projects Industrial control panels Automation systems Robotics projects Doorbell and alarm systems Power control circuits Electronic devices 🔹 Package Includes 1 × 3A 250V Blue Push Button Momentary Switch
3A 250V Yellow Push Button Momentary Type No Lock Push Only
[Mechanical Switches] The 3A 250V Yellow Push Button Momentary Switch is a compact and reliable push-type switch designed for temporary ON/OFF control applications. It features a momentary non-locking mechanism, which means the switch remains active only while being pressed. In addition, the switch uses a Normally Open (NO) contact configuration. As a result, the electrical circuit closes only when the button is pressed and automatically returns to its original state after release. Because of its compact size and durable plastic construction, the switch is suitable for many electronic and industrial applications. Furthermore, the bright yellow button improves visibility and allows easy identification during operation. The switch supports loads up to 3A at 250VAC, making it suitable for both AC and low-voltage DC control circuits. Moreover, the panel-mount design allows quick and secure installation into control panels and electronic enclosures. This push button switch is widely used in DIY electronics, industrial automation, robotics systems, alarm systems, doorbell circuits, and power control applications. 🔹 Key Features Momentary push button operation Normally Open (NO) contact type Non-locking push switch design Compact and lightweight body Bright yellow push button cap Easy panel mounting installation Stable and reliable switching operation Suitable for AC and DC applications 🔹 Technical Specifications Switch Type: Momentary Push Button Switch Contact Type: Normally Open (NO) Operation Type: Non-Locking (Push Only) Rated Voltage: 250V AC Rated Current: 3A Button Color: Yellow Mounting Type: Panel Mount Mounting Hole Diameter: Approx. 12mm Button Diameter: Approx. 12mm Total Length: Approx. 28mm Body Material: Plastic Contact Material: Silver-Plated Metal Terminal Type: 2 Pin Solder/Quick Connect Operating Temperature: -25°C to +85°C 🔹 Applications This push button switch is suitable for many electronic and electrical applications, including: DIY electronics projects Industrial control panels Automation systems Robotics projects Doorbell and alarm systems Power control circuits Electronic devices 🔹 Package Includes 1 × 3A 250V Yellow Push Button Momentary Switch
3A 250V Red Push Button Momentary Type No Lock Push Only
[Mechanical Switches] The 3A 250V Red Push Button Momentary Switch is a compact and reliable push-type switch designed for temporary ON/OFF control applications. It features a momentary non-locking mechanism, which means the switch remains active only while being pressed. In addition, the switch uses a Normally Open (NO) contact configuration. As a result, the circuit closes only when the button is pressed and automatically returns to its original state after release. Because of its compact size and durable construction, the switch is suitable for many electronic and electrical projects. Furthermore, the bright red button improves visibility and allows quick identification during operation. The switch supports loads up to 3A at 250VAC, making it suitable for low-power AC and DC control applications. Moreover, the simple panel-mount structure allows fast installation into enclosures and control panels. This push button switch is widely used in DIY electronics, robotics systems, industrial automation, doorbell circuits, audio equipment, and control applications. 🔹 Key Features Momentary push button operation Normally Open (NO) contact type Non-locking push switch design Compact and lightweight construction Durable plastic body Easy panel mounting installation Bright red push button cap Suitable for AC and DC applications 🔹 Technical Specifications Switch Type: Momentary Push Button Switch Contact Type: Normally Open (NO) Operation Type: Non-Locking Momentary Rated Voltage: 250V AC Rated Current: 3A Button Color: Red Mounting Type: Panel Mount Mounting Hole Diameter: Approx. 12mm Button Diameter: Approx. 12mm Total Body Length: Approx. 28mm Body Material: Plastic Contact Material: Metal Contacts 🔹 Applications This push button switch is suitable for many electronic and industrial applications, including: DIY electronics projects Robotics systems Industrial control panels Automation systems Doorbell circuits Audio equipment Power control applications Electronic devices 🔹 Package Includes 1 × 3A 250V Red Push Button Momentary Switch
Type-C USB Mini Humidifier DIY Kit 4 in 1 | 4-Fogger Mist Maker Module | Ultrasonic Atomizer Film Sheet with Driver Board
[Ultrasonic Sensor] The Type-C USB Mini Humidifier DIY Atomizer Kit is a compact ultrasonic mist generation module designed for building or repairing USB-powered humidifiers, aroma diffusers, and fogging systems. Powered directly from a 5V USB Type-C source, the kit features a high-performance driver board and four ultrasonic ceramic atomizer discs that generate a dense, cool mist with low power consumption. Using advanced 108KHz ultrasonic atomization technology, the module converts water into ultra-fine mist particles without producing heat or mechanical noise. The stable driver circuit ensures reliable oscillation, efficient mist production, and long service life, making it an excellent choice for DIY enthusiasts, students, makers, repair technicians, and electronics hobbyists. Simply connect the module to a 5V USB Type-C power source, place the atomizer discs in water, and enjoy instant cool mist generation. It is compatible with custom humidifier enclosures, bottles, containers, 3D-printed projects, hydroponic systems, and decorative fog applications. ⭐ Features USB Type-C powered (5V DC) Four ultrasonic ceramic atomizer discs High-density cool mist output Advanced ultrasonic atomization technology Stable driver circuit for reliable operation Low power consumption Silent operation with no moving parts Compact and lightweight design Easy plug-and-play installation Ideal for DIY humidifiers and aroma diffusers 📋 Technical Specifications Product Type: USB Ultrasonic Humidifier Driver Kit Power Input: USB Type-C Female Operating Voltage: DC 4.5V–5V Input Voltage: 5V USB Operating Current: 300mA (Typical) Power Consumption: 2.5W–3W Rated Power: 2W Operating Frequency: 108KHz ±2KHz Atomizer Quantity: 4 Ceramic Atomizer Discs Atomization Technology: Ultrasonic Mist Output: High Density Fine Mist Driver Board: Ultrasonic Oscillation Control Module Cooling Method: Natural Cooling Power Connector: USB Type-C Female Socket Material: Ceramic Atomizer Discs + PCB Driver Board 🔧 Applications Suitable for: DIY USB Humidifiers Aroma Diffusers Replacement Humidifier Modules Decorative Fog Makers Hydroponic Systems Smart Garden Projects Terrariums & Vivariums Indoor Plant Humidification Science & Educational Projects Prototype Development DIY Electronics Projects 📦 Package Includes 1 × Ultrasonic Driver Circuit Board 4 × Ceramic Ultrasonic Atomizer Discs ⚠️ Note Use only clean water for optimal performance and longer atomizer life. Do not operate the module without water. Product images are for illustrative purposes only. The actual product may vary slightly depending on the manufacturing batch.
Out of stockWS2812B 144 LEDs/m RGB Addressable LED Pixel Strip Light 5V DC Programmable IP65 Waterproof
[RGB LED Strip] Product Description Illuminate your space with the 144 Addressable WS2812B LED Strip (5V, IP65 Waterproof) — a high-quality, vibrant, and flexible lighting solution designed for both indoor and outdoor applications.This LED strip delivers brilliant RGB colors and individually addressable LEDs, allowing you to create dynamic light effects and custom animations for any occasion. The IP65 waterproof rating ensures reliable performance even in dusty or humid environments, making it ideal for home decor, commercial lighting, events, and DIY projects.Its adhesive backing allows for quick installation on clean surfaces, making it a perfect choice for hobbyists, professionals, and decorators. With 144 LEDs per meter, this strip provides exceptional brightness, flexibility, and color control for artistic displays, mood lighting, or architectural highlights. Key Features 🌈 Addressable Design Each LED is individually controllable, allowing you to produce stunning lighting effects, animations, and color patterns. Perfect for creative lighting projects and synchronized displays. 💧 IP65 Waterproof Protection Built to withstand dust and light water exposure, this LED strip ensures long-lasting durability in both indoor and outdoor environments. 🔆 Vibrant RGB Colors Enjoy rich and vivid RGB color combinations — from bold, dynamic hues to soft ambient tones — to match any mood or theme. 🧩 Easy Installation The flexible strip comes with a strong adhesive backing. Simply peel and stick it to any clean, dry surface for quick setup without tools. ⚙️ Versatile Applications Ideal for home decoration, outdoor landscaping, parties, events, art installations, and signage. Its flexibility makes it suitable for various shapes and surfaces. Specifications Specification Description LED Type WS2812B LED Quantity 144 LEDs per meter Input Voltage 5V DC Waterproof Rating IP65 Control Method Individually Addressable Color RGB (Red, Green, Blue) Strip Length 1 Meter Power Consumption Depends on brightness and color settings Weight 150 g(Approx) Installation Adhesive backing Applications ✨ Enhance your outdoor landscape with vibrant, programmable lighting effects. 💡 Highlight indoor architectural elements or furniture with accent lighting. 🎉 Create dynamic effects for parties, weddings, or events to match the ambiance. 🎮 Upgrade your home theater or gaming setup with immersive backlighting. 🏢 Use in shops or signage displays for eye-catching illumination and visual impact. Package Includes 1 × WS2812B 144 LEDs/m RGB Addressable LED Pixel Strip Light 5V DC Programmable IP65 Waterproof
Out of stockDC 12V Mini 370 Diaphragm Pump Self-Priming Suction Pressure Water Pump
[DC Water Pump] DC 12V mini 370 Self-Priming Water pump Introducing DC 12V Mini 370 Self-Priming Water Pump at best price in India with . Designed for durability and this DC 12V Mini 370 Diaphragm Pump offers consistent performance with self-priming capability & ensure smooth operation even at varying pressure. Compact and lightweight, this 12V 370 mini water pump is perfect for application like aquariums, small fountain, and portable water system. With its robust suction capabilities, this DC 12V Self-Priming Suction Pressure Water Pump ensure effective water flow in diverse setting. Its low power consumption and quiet operation make it perfect for both indoor and outdoor use. Built with high quality material, this pump is resistant to wear & ensure reliable performance over time. Feature Self-Priming Mechanism: This DC 12V mini 370 Self-Priming Water pump pump feature a self priming design for efficient water transfer. It ensure stable performance even with changing water level. Compact and Lightweight: Its small size and low weight make it easy to use in small space. Perfect for portable application need minimal space usage. High Suction Power: This water pump deliver strong suction power for quick and effective water movement. It can handle low pressure condition without loosing output efficiency. Durable Build Quality: This DC 12V Mini 370 Diaphragm Pump made from high quality material, this pump offer long lasting durability and performance. It resists wear and tear & ensure reliable operation over time. Versatile Application: It is also perfect for aquarium, small garden, and DIY water circulation project. The pump works effectively for a variety of home and industrial uses. Specification Specification Details Operating Voltage 12V DC Current Consumption 0.5A – 1A (depending on load) Flow Rate 1.5-2.5 liters per minute Maximum Pressure Up to 2.5 bar (36 PSI) Suction Lift Up to 2 meters Discharge Head Up to 3 meters Motor Type 370 brushed motor Self-Priming Yes, capable of dry priming Body Material High-quality plastic with corrosion resistance Port Diameter Inlet and outlet: 4mm Noise Level Low noise operation (<65 dB) Lifespan Over 1000 hours of continuous operation Applications Water transfer, small irrigation systems, DIY project Dimensions 24x61x24mm Weight 60g Package Includes: 1 x DC 12V Mini 370 Diaphragm Pump Self-Priming Suction Pressure Water Pump
High Quality Ultra Flexible 18AWG Silicone Wire 1m (Red) + 1m (Black)
[Silicon Wire] The High-Quality 18AWG Silicone Wire 1m (Red) + 1m (Black) pair has a pretty big diameter as compared to the normal 18AWG wire used in RC projects for serving its specific purpose. This wire has low resistance and high current carrying capacity. These are also used in LiPO batteries to deliver power to ESC’s. Ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. The wire is the first priority tool for carrying current from one circuit to other while their current carrying capacity is dependent upon the size of the wire. So the High Quality 18AWG Silicone Wire 1m (Red) + 1m (Black) both has the considerable diameter to suit your application. Please find out our more cable and wires. Click here Wires with the wide variety of silicon wire gauges and colors to suit your applications are available The 18AWG High Temperature Silicone Wire is a premium-quality flexible electrical cable designed for low to medium current applications requiring excellent flexibility and high-temperature resistance. Manufactured using high-purity tinned copper conductors with soft silicone rubber insulation, this wire provides outstanding electrical conductivity, corrosion resistance, and long service life. Rated for 600V and capable of operating continuously at temperatures up to 200°C, this silicone wire is suitable for battery packs, RC models, drones, LED lighting, robotics, power supplies, automotive wiring, solar systems, and DIY electronic projects. The tinned copper conductor ensures efficient current transfer with minimal voltage drop while resisting oxidation and corrosion. Its ultra-flexible silicone insulation allows easy routing through tight spaces and provides excellent durability in demanding environments. This package includes 1 meter of Red wire and 1 meter of Black wire, making it ideal for positive and negative wiring in electronic and electrical applications. ⭐ Features Premium 18AWG silicone insulated wire High-purity tinned copper conductor Ultra-flexible silicone insulation Rated for 600V operation Heat resistant up to 200°C Excellent electrical conductivity Corrosion-resistant tinned copper strands Easy to strip, solder, and terminate Soft, durable, and wear-resistant insulation Suitable for indoor and outdoor applications 📋 Technical Specifications Product Type: High Temperature Silicone Wire Wire Gauge: 18 AWG Conductor Material: Tinned Copper Insulation Material: High Temperature Silicone Rubber Rated Voltage: 600V Rated Temperature: 200°C Rated Current: 8A (Typical) Wire Type: Flexible Multi-Strand Marking: 18AWG 600V 200°C Wire Color: Red & Black Length: 1 Meter Red + 1 Meter Black (Total 2 Meters) 🔧 Applications Suitable for: Lithium Battery Packs RC Cars & RC Boats FPV Drones Model Aircraft Solar Power Systems LED Lighting Power Supplies Robotics Projects Arduino Projects ESP32 Projects Raspberry Pi Projects Automotive Wiring Electric Scooters & E-Bikes DIY Electronics Laboratory Equipment Industrial Control Panels 📦 Package Includes 1 × 18AWG High Temperature Silicone Wire – Red (1 Meter) 1 × 18AWG High Temperature Silicone Wire – Black (1 Meter)
Out of stock24V 1.5A DC Power Supply Adapter Good Quality with 1 Year Warranty
[Adaptor Power Supply] The 24V 1.5A DC Power Adapter is a premium-quality SMPS-based regulated power supply designed to deliver a stable and reliable 24V DC output at 1.5 amps. Supporting a wide AC input range of 100–240V, this adapter works seamlessly with Indian power sockets without requiring any plug converter. Built with advanced switch-mode power supply (SMPS) technology, this adapter offers high efficiency, low ripple, low interference, and excellent voltage regulation. It ensures smooth and safe operation for sensitive electronic devices. Equipped with short-circuit, over-voltage, and over-current protection, the adapter protects both your equipment and the power supply from electrical damage. Its compact, lightweight, and center-positive design makes it perfect for continuous indoor use. Ideal for powering CCTV cameras, routers, networking equipment, LED lighting systems, access control systems, industrial electronics, and DIY projects, this adapter delivers high reliability and long-term performance, backed by a 1-year warranty. ⭐ KEY FEATURES ✔ Output: 24V DC, 1.5A stable regulated supply✔ Wide Input Range: AC 100–240V, 50/60Hz✔ SMPS Technology – High efficiency & low heat✔ Built-in Short Circuit, Over-Voltage & Over-Current Protection✔ Center Positive Output✔ Indian Plug Design – No converter required✔ Compact, lightweight & portable✔ Low ripple, low noise & high reliability✔ 1-Year Warranty 🔧 TECHNICAL SPECIFICATIONS Input Voltage: AC 100–240V, 50/60Hz Output Voltage: DC 24V Output Current: 1.5A Output Power: 36W (Approx.) Output Type: DC, Single Output Polarity: Center Positive Category: Switch Mode Power Adapter (SMPS) Efficiency: High, low energy consumption Warranty: 1 Year 🎯 APPLICATIONS CCTV cameras & DVR systems Routers & networking equipment LED strips & lighting systems Access control systems Industrial control panels DIY electronics & embedded projects 📦 PACKAGE INCLUDES 1 × 24V 1.5A DC Power Supply Adapter * Product Images are shown for illustrative purposes only and may differ from actual product.
Type-C USB Ultrasonic Mist Maker Humidifier – 5V Atomizer Module with 108KHz Disc & PCB
[Ultrasonic Sensor] The Type-C USB Ultrasonic Mist Maker Humidifier Module is a compact and efficient atomization device designed for humidification and mist generation applications. It uses advanced ultrasonic technology to produce a fine and continuous mist, helping improve air moisture and indoor comfort. In addition, the module operates using a 108KHz high-frequency ceramic atomizer disc, which ensures stable mist generation with low noise and efficient performance. As a result, it is suitable for personal humidifiers, aroma diffusers, facial beauty equipment, and DIY mist projects. Because of its convenient Type-C USB power interface, the module can be powered easily using USB adapters, power banks, laptops, and other 5V USB power sources. Furthermore, the compact PCB design allows easy integration into portable and custom-built humidifier systems. The module also features low power consumption and reliable operation for continuous use. Moreover, the built-in safety protection helps automatically stop operation when the water level becomes too low. This ultrasonic mist maker is widely used in humidifiers, mist generators, aromatherapy devices, beauty care equipment, and medical atomization systems. 🔹 Key Features Ultrasonic mist generation technology 108KHz ceramic atomizer disc Convenient Type-C USB power input Fine and continuous mist output Compact and lightweight design Low power consumption Quiet operation Automatic low water protection Suitable for DIY humidifier projects 🔹 Technical Specifications Product Type: Ultrasonic Mist Maker Module Input Voltage: 5V DC Power Interface: Type-C USB Operating Frequency: 108KHz Atomization Mode: Continuous Power Consumption: Less than 3W Mist Output: Adjustable Operating Temperature: 5°C to 45°C Storage Temperature: -10°C to 60°C Material: PCB + Ceramic Atomization Film Humidity Range: Non-Condensing Application Type: Humidifier / Mist Generator 🔹 Applications This ultrasonic mist maker module is suitable for many applications, including: Portable humidifiers DIY mist generators Aroma diffusers Facial beauty equipment Medical liquid atomizers Air moisture control systems Decorative mist projects 🔹 Package Includes 1 × Humidifier Driver Board 1 × 16mm Atomizer Plate 1 × Cotton Stick Stand 1 × Cotton Stick
High Quality Ultra Flexible 6AWG Silicone Wire ( 13.3SQMM) 1m (Black) + 1m (Red)
[Silicon Wire] Due to the use of ultra-fine tinned copper wire (0.08mm diameter), silicone wire can withstand high temperatures and maintain flexibility, allowing it to endure high current operation over the long term. Silicone wire is a flexible, durable, and heat-resistant electrical wire commonly used in high-temperature environments and demanding applications. Its insulation is made from silicone rubber, offering superior resistance to abrasion, chemicals, and extreme temperatures ranging from -60°C to 200°C. This wire is ideal for robotics, automotive, aerospace, and electronic projects due to its flexibility and reliability. Silicone wire typically features stranded copper conductors, ensuring excellent conductivity and durability. It is also flame-retardant, weather-resistant, and suitable for both indoor and outdoor use. Its versatility and high-performance properties make it a popular choice for professional and DIY electrical applications. Features : Super Flexible. High Strand Count. Pure Silicone Outer. Cul Standard: 6AWG Material: Tinned Copper Construction AWG: 2400/0.8TS± 0.008mm Nominal Voltage: 600V Nominal Temprature: 200°C Nominal Current: 120A Marking: 7awg 200°C Package Includes : 1 x High-Quality 6AWG Silicone Wire 1m (Black) 1 x High-Quality 6AWG Silicone Wire 1m (Red)
315MHz 4 Channel Wireless RF Remote Control Kit with Receiver Module (Non-Locking Mode)
[RF Module] 📡 315MHz 4 Channel Wireless RF Remote Control Kit with Receiver Module (Non-Locking Mode) 4 Channel RF Remote • 315MHz ASK Communication • 5V Receiver • Non-Locking Mode • Long Range Wireless Control The 315MHz 4 Channel Wireless RF Remote Control Kit is a reliable wireless control solution consisting of a 4-button RF transmitter and a super regenerative ASK receiver module. Operating at 315MHz, this kit is ideal for remote switching, automation, robotics, security systems, and DIY wireless control projects. The receiver module features four independent digital outputs (D0–D3) that correspond to the four buttons on the transmitter. When a button is pressed, the respective output pin goes HIGH, returning LOW immediately after the button is released. This Non-Locking (Momentary/Jog) operation makes the module perfect for applications requiring temporary switching such as electric door control, motor jogging, relay activation, and microcontroller interfacing. The receiver operates from a 5V DC supply and features a high-sensitivity ASK receiver with a Valid Transmission (VT) output pin for reliable signal detection. The transmitter uses a fixed-code encoder for secure communication and easy operation. Ideal for Arduino, ESP32, Raspberry Pi, AVR, PIC, industrial automation, wireless switching, and educational electronics projects. ⭐ Features 4-channel wireless RF remote control kit Operating frequency: 315MHz ASK (Amplitude Shift Keying) modulation Fixed-code RF transmitter Non-Locking (Momentary/Jog) operating mode Four independent digital outputs (D0–D3) High-sensitivity super regenerative receiver 5V DC receiver operating voltage VT (Valid Transmission) status output Compact PCB design Easy interface with microcontrollers Long wireless transmission range (environment dependent) Suitable for DIY and industrial automation 📋 Technical Specifications RF Transmitter Product Type: RF Wireless Remote Control Operating Frequency: 315MHz Number of Buttons: 4 Channels: 4 Modulation: ASK (Amplitude Shift Keying) Encoding Type: Fixed Code Operating Mode: Non-Locking (Momentary) Power Supply: 12V A23 Battery (Not Included) RF Receiver Module Operating Voltage: 5V DC Operating Frequency: 315MHz Receiver Type: Super Regenerative ASK Receiver Receiver Sensitivity: -98dBm Output Channels: D0, D1, D2, D3 VT Output: Yes (Valid Signal Output) Antenna Connection: External ANT Pin Recommended Antenna Length: Approx. 17cm (Quarter-Wave) Module Dimensions: Approx. 41 × 22 × 7 mm Receiver Pin Configuration VT – Valid Signal Output D3 – Channel 4 Output D2 – Channel 3 Output D1 – Channel 2 Output D0 – Channel 1 Output +5V – Power Input GND – Ground ANT – External Antenna Connection 🔧 Operating Modes Non-Locking (Momentary/Jog Mode) Press a button → Corresponding output goes HIGH. Release the button → Output immediately returns LOW. Ideal for momentary control applications. Note: This product is supplied in Non-Locking Mode only. 🔧 Applications Suitable for: Arduino Projects ESP32 Projects Raspberry Pi Projects Wireless Relay Control Home Automation Industrial Automation Remote Door Control Electric Door Locks Wireless Switching Robotics Motor Control Lighting Control Alarm Systems Security Systems DIY Electronics Educational Projects 📦 Package Includes 1 × 4-Button 315MHz RF Wireless Remote Control 1 × 315MHz Super Regenerative Receiver Module ⚠️ Note Battery is included. A 12V A23 battery is required for operation. Avoid bending or touching the receiver's onboard inductor (copper coil), as this may affect receiver sensitivity. Wireless operating range depends on antenna quality, obstacles, and surrounding RF interference. Product appearance may vary slightly depending on the manufacturing batch.
Out of stock5V 10A SMPS – 50W – DC Metal Power Supply
[SMPS] 5V 10A SMPS – 50W – DC Metal Power Supply Non Water Proof A switched-mode power supply is an electronic power supply that incorporates a switching regulator to convert electrical power efficiently. Like other power supplies, an SMPS transfers power from a DC or AC source (often mains power) to DC loads, such as a personal computer, while converting voltage and current characteristics. Unlike a linear power supply, the pass transistor of a switching-mode supply continually switches between low-dissipation, full-on and full-off states, and spends very little time in the high dissipation transitions, which minimizes wasted energy. Please find out our others power supply, Click here Features/Specs: Input Voltage: AC 100 – 264V 50 / 60Hz Output Voltage: 5V DC, 10A Total Power: 50 W Protections: Overload / Over Voltage / Short Circuit Auto-Recovery After Protection Universal AC input / Full range 100% Full Load Burn-in Test Cooling by Free Air Convection High Quality and High Performance LED power supply with a metal body for hidden installation for LED lighting Design with Built-in EMI Filter, improve signal precision. No Minimum Load. Compact Size Light Weight. High Efficiency, Reliabiltiy & low energy consumption Category – Switch Mode Power Adaptor (SMPS) MTBF >50,000 hours Output Type – DC Output – 5Volts 10Amp Shell Material: Metal Case / Aluminum Base Color: Sliver IN-DOOR USE ONLY! Package Includes: 1 x 5V 10A SMPS – 50W – DC Metal Power Supply Non Water Proof Note: Product Images are shown for illustrative purposes only and may differ from the actual product.
High Quality Ultra Flexible 16AWG Silicone Wire 1m (Red) + 1m (Black)
[Silicon Wire] The High-Quality 16AWG Silicone Wire 1m (Red) + 1m (Black) pair has a pretty big diameter as compared to the normal 20AWG wire used in RC projects for serving its specific purpose. This wire has low resistance and high current carrying capacity. These are also used in LiPO batteries to deliver power to ESC’s. Ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. The wire is the first priority tool for carrying current from one circuit to other while their current carrying capacity is dependent upon the size of the wire. So the High Quality 16AWG Silicone Wire 1m (Red) + 1m (Black) both has the considerable diameter to suit your application. Please find out our more cable and wires. Click here Wires with the wide variety of silicon wire gauges and colors to suit your applications are available The 16AWG High Temperature Silicone Wire is a premium-quality flexible electrical cable designed for high-current and high-temperature applications. Manufactured using high-purity tinned copper conductors with soft silicone rubber insulation, this wire offers excellent flexibility, superior electrical conductivity, and outstanding resistance to heat, moisture, chemicals, and aging. Rated for 600V and capable of operating at temperatures up to 200°C, this silicone wire is ideal for battery packs, RC models, drones, solar power systems, automotive wiring, LED lighting, power supplies, robotics, and various industrial and DIY electronic projects. The tinned copper conductor provides low resistance and excellent corrosion protection, ensuring efficient power transmission and long service life. Its ultra-flexible silicone insulation allows easy routing and installation, even in confined spaces or moving applications. This package includes 1 meter of Red wire and 1 meter of Black wire, making it perfect for positive and negative wiring in electronic and electrical projects. ⭐ Features Premium 16AWG silicone insulated wire High-purity tinned copper conductor Ultra-flexible silicone insulation Rated for 600V operation Heat resistant up to 200°C High current carrying capacity Excellent corrosion resistance Easy to strip, solder, and terminate Soft and durable construction Suitable for indoor and outdoor applications 📋 Technical Specifications Product Type: High Temperature Silicone Wire Wire Gauge: 16 AWG Conductor Material: Tinned Copper Insulation Material: High Temperature Silicone Rubber Rated Voltage: 600V Rated Temperature: 200°C Rated Current: 12.5A Wire Type: Flexible Multi-Strand Marking: 16AWG 600V 200°C Wire Color: Red & Black Length: 1 Meter Red + 1 Meter Black (Total 2 Meters) 🔧 Applications Suitable for: Lithium Battery Packs RC Cars & RC Boats FPV Drones Model Aircraft Solar Power Systems LED Lighting Power Supplies Robotics Projects Arduino Projects ESP32 Projects Raspberry Pi Projects Automotive Wiring Electric Bicycles & Scooters DIY Electronics Laboratory Equipment Industrial Control Panels 📦 Package Includes 1 × 16AWG High Temperature Silicone Wire – Red (1 Meter) 1 × 16AWG High Temperature Silicone Wire – Black (1 Meter)
High Quality Ultra Flexible 12AWG Silicone Wire 1m (Red) + 1m (Black)
[Silicon Wire] The High-Quality 12AWG Silicone Wire 1m (Red) + 1m (Black) pair has a pretty big diameter as compared to the normal 20AWG wire used in RC projects for serving its specific purpose. This wire has low resistance and high current carrying capacity. These are also used in LiPO batteries to deliver power to ESC’s. Ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. The wire is the first priority tool for carrying current from one circuit to other while their current carrying capacity is dependent upon the size of the wire. So the High Quality 12AWG Silicone Wire 1m (Red) + 1m (Black) both has the considerable diameter to suit your application. Please find out our more cable and wires. Click here Wires with the wide variety of silicon wire gauges and colors to suit your applications are available Features : Super Flexible. High Strand Count. Pure Silicone Outer. Cul Standard: 12AWG Material: Tinned Copper Construction AWG: 680/0.8± 0.005mm Nominal Voltage: 600V Nominal Temprature: 200°C Nominal Current: 34A Marking: 12awg 600V 200°CDue to the use of ultra-fine tinned copper wire (0.08mm diameter), silicone wire can withstand high temperatures and maintain flexibility, allowing it to endure high current operation over the long term. Silicone wire is a flexible, durable, and heat-resistant electrical wire commonly used in high-temperature environments and demanding applications. Its insulation is made from silicone rubber, offering superior resistance to abrasion, chemicals, and extreme temperatures ranging from -60°C to 200°C. This wire is ideal for robotics, automotive, aerospace, and electronic projects due to its flexibility and reliability. Silicone wire typically features stranded copper conductors, ensuring excellent conductivity and durability. It is also flame-retardant, weather-resistant, and suitable for both indoor and outdoor use. Its versatility and high-performance properties make it a popular choice for professional and DIY electrical applications. Package Includes : 1 x High Quality 12AWG Silicone Wire 1m (Red) 1 x High Quality 12AWG Silicone Wire 1m (Black)
High Quality Ultra Flexible 10AWG Silicone Wire 1m (Black) + 1m (Red)
[Silicon Wire] High Quality Ultra Flexible 10AWG Silicone Wire 1m (Black) + 1m (Red) The High-Quality 10AWG Silicone Wire 1m (Red) + 1m (Black) pair has a pretty big diameter as compared to the normal 20AWG wire used in RC projects for serving its specific purpose. This wire has low resistance and high current carrying capacity. These are also used in LiPO batteries to deliver power to ESC’s. Ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. The wire is the first priority tool for carrying current from one circuit to other while their current carrying capacity is dependent upon the size of the wire. So the High Quality 12AWG Silicone Wire 1m (Red) + 1m (Black) both has the considerable diameter to suit your application. Please find out our more cable and wires. Click here Wires with the wide variety of silicon wire gauges and colors to suit your applications are available Features : Cul Standard: 10AWG Material: Tinned Copper Construction AWG: 1050/0.8± 0.005mm Nominal Voltage: 600V Nominal Temprature: 200°C Nominal Current: 53A Marking: 10awg 600V 200°CDue to the use of ultra-fine tinned copper wire (0.08mm diameter), silicone wire can withstand high temperatures and maintain flexibility, allowing it to endure high current operation over the long term. Silicone wire is a flexible, durable, and heat-resistant electrical wire commonly used in high-temperature environments and demanding applications. Its insulation is made from silicone rubber, offering superior resistance to abrasion, chemicals, and extreme temperatures ranging from -60°C to 200°C. This wire is ideal for robotics, automotive, aerospace, and electronic projects due to its flexibility and reliability. Silicone wire typically features stranded copper conductors, ensuring excellent conductivity and durability. It is also flame-retardant, weather-resistant, and suitable for both indoor and outdoor use. Its versatility and high-performance properties make it a popular choice for professional and DIY electrical applications. Package Includes : 1 x High-Quality 10AWG Silicone Wire 1m (Black) 1 x High-Quality 10AWG Silicone Wire 1m (Red)
High Quality Ultra Flexible 14AWG Silicone Wire 1m (Red) + 1m (Black)
[Silicon Wire] The High-Quality 14AWG Silicone Wire 1m (Red) + 1m (Black) pair has a pretty big diameter as compared to the normal 20AWG wire used in RC projects for serving its specific purpose. This wire has low resistance and high current carrying capacity. These are also used in LiPO batteries to deliver power to ESC’s. Ideal for your RC project. It is super flexible and soft with a high strand count which means it is great for use in restrictive and compact areas. The wire is the first priority tool for carrying current from one circuit to other while their current carrying capacity is dependent upon the size of the wire. So the High Quality 14AWG Silicone Wire 1m (Red) + 1m (Black) both has the considerable diameter to suit your application. Please find out our more cable and wires. Click here Wires with the wide variety of silicon wire gauges and colors to suit your applications are available Features : Cul Standard: 14AWG Material: Tinned Copper Construction AWG: 400/0.8± 0.005mm Nominal Voltage: 600V Nominal Temprature: 200°C Nominal Current: 20A Marking: 14awg 600V 200°C Due to the use of ultra-fine tinned copper wire (0.08mm diameter), silicone wire can withstand high temperatures and maintain flexibility, allowing it to endure high current operation over the long term.Silicone wire is a flexible, durable, and heat-resistant electrical wire commonly used in high-temperature environments and demanding applications. Its insulation is made from silicone rubber, offering superior resistance to abrasion, chemicals, and extreme temperatures ranging from -60°C to 200°C. This wire is ideal for robotics, automotive, aerospace, and electronic projects due to its flexibility and reliability. Silicone wire typically features stranded copper conductors, ensuring excellent conductivity and durability. It is also flame-retardant, weather-resistant, and suitable for both indoor and outdoor use. Its versatility and high-performance properties make it a popular choice for professional and DIY electrical applications. Similar Products Package Includes : 1 x High Quality 14AWG Silicone Wire 1m (Red) 1 x High Quality 14AWG Silicone Wire 1m (Black)
TowerPro Metal Gear MG90S Mini Digital Servo Motor (180° Rotation)
[Servo Motor] ⚙️ TowerPro MG90S Mini Digital Metal Gear Servo Motor (180°) Metal Gear • Digital Servo • 180° Rotation • High Precision • Ideal for RC & Robotics The TowerPro MG90S Mini Digital Servo Motor is a compact, high-performance 9g metal gear servo designed for precise position control in robotics, RC models, automation, and DIY electronics projects. Equipped with all-metal gears, a digital control circuit, and high positioning accuracy, the MG90S offers greater durability, faster response, and higher torque than standard plastic gear servos. Operating from 4.8V to 6.0V DC, the servo delivers a stall torque of up to 2.2 kg·cm and a rotation angle of approximately 180°, making it ideal for robotic arms, pan-tilt camera systems, RC airplanes, RC cars, boats, educational kits, and embedded control applications. The standard 3-wire JR/Futaba-compatible connector allows direct interfacing with Arduino, ESP32, Raspberry Pi, STM32, and most RC receivers. Its lightweight design, compact dimensions, and excellent holding torque make the MG90S one of the most popular micro servos for hobbyists, students, and professionals alike. ⭐ Features Genuine TowerPro MG90S digital servo Durable all-metal gear transmission Approximate 180° rotation angle High positioning accuracy Fast control response High holding torque Smooth and quiet operation Lightweight and compact design Standard 3-wire servo interface Compatible with Arduino, ESP32, Raspberry Pi and RC receivers Ideal for robotics, RC models and automation projects 📋 Technical Specifications Product Type: Mini Digital Servo Motor Brand: TowerPro Model: MG90S Gear Type: Metal Gear Rotation Angle: Approximately 180° Operating Voltage: 4.8V–6.0V DC Stall Torque: 1.8 kg·cm @ 4.8V 2.2 kg·cm @ 6.0V Operating Speed: 0.10 sec/60° @ 4.8V 0.08 sec/60° @ 6.0V Control Signal: PWM (50Hz Standard Servo Signal) Dead Band Width: 1µs Connector Type: JR / Futaba Compatible Cable Length: Approximately 25cm Dimensions: 22.8 × 12.2 × 28.5 mm Weight: Approximately 13.4g Operating Temperature: 0°C to +55°C These specifications are consistent with the manufacturer's published specifications. 🔧 Applications Suitable for: Arduino Projects ESP32 Projects Raspberry Pi Projects Robotic Arms Humanoid Robots RC Airplanes RC Cars RC Boats Pan-Tilt Camera Systems Automatic Door Mechanisms DIY Electronics Educational Robotics Smart Automation Projects Mechatronics Projects 📦 Package Includes 1 × TowerPro MG90S Mini Digital Servo Motor 1 × Servo Horn Set Single Arm Horn Double Arm Horn Four Arm Horn 1 × Mounting Screw Set ⚠️ Note Operate the servo only within the recommended 4.8V–6.0V DC supply range. For stable operation, use an external regulated power supply when driving the servo from microcontrollers. Product appearance, cable color, or accessories may vary slightly depending on the manufacturing batch. Counterfeit MG90S servos are common in the market. Purchase from trusted suppliers for genuine performance.
High power LED 20-100W lamp bead lens 44MM optical glass 90 degree led lens
[LED Lens] The 44mm High Power LED Lens Kit is designed for improving the light output and beam control of 20W to 100W integrated LED light sources. It includes a high-quality optical glass lens, reflective collimator, and metal fixing bracket for stable mounting. In addition, the lens provides a wide 90-degree light distribution, helping create uniform and efficient illumination. As a result, it is suitable for flood lighting, DIY LED lamps, spotlights, and industrial lighting systems. Because of its optical-grade glass construction, the lens delivers excellent light transmission and improved brightness. Furthermore, the included 50mm reflector helps focus and direct the LED beam more efficiently. The durable metal bracket ensures secure mounting and easy installation onto LED modules and heatsinks. Moreover, the compact design makes it suitable for custom lighting projects and high-power LED applications. This LED lens kit is widely used in flood lights, high-power LED lamps, DIY lighting systems, stage lighting, projection lighting, and industrial illumination projects. 🔹 Key Features Suitable for 20W to 100W high power LEDs High-quality optical glass lens Includes reflective collimator and fixing bracket Wide 90° beam angle design Efficient light focusing and distribution Durable metal reflector housing Easy installation and mounting Ideal for DIY and industrial lighting projects 🔹 Technical Specifications Product Type: High Power LED Lens Kit Lens Diameter: 44mm Reflector Diameter: 50mm Beam Angle: 60°–80° Lens Type: Optical Glass Lens Reflector Material: Metal Bracket Material: Metal Applicable LED Power: 20W–100W Light Angle: 90 Degrees Application Type: Integrated High Power LED Source 🔹 Applications This LED lens kit is suitable for many lighting applications, including: High power LED flood lights DIY LED lamps Spot lighting systems Stage lighting Industrial lighting Projection lighting projects Outdoor LED lighting systems 🔹 Package Includes 1 × 44mm Optical Glass Lens 1 × 50mm Reflector 1 × Metal Fixing Bracket
DC 3V-6V to 1000KV 1000000V Boost Step-up Power Module
[Step UP Buck Converter] Description Overview of this DC 3V-6V to 1000KV step up high voltage generator The DC 3.6V-6V To 1000KV Boost Step Up Power Module is a cutting edge high voltage generator designed for diverse applications. With a focus on safety and efficiency. This module easily transforms low input voltages of 3.6V to 6V into a powerful output up to 1000KV. Ideal for high-voltage experiments, education purposes, and prototype. It also provides a versatile solution for various electronic projects. Featuring advanced step-up DC conversion technology, this module ensures stable and reliable performance. Its compact design also make it perfect for use in a wide range of projects. The input range of 3V-6V offers flexibility, and the adjustable output allows users to fine-tune the voltage as needed. With a focus on user safety, the module includes built-in protective featur to prevent overloading and ensure efficient operation. This makes it an excellent choice for experimentation. And also enable users to observe and understand high-voltage principles while maintaining a reliable and secure environment. Elevate your projects with this versatile high-voltage generator, perfect for education institute, research lab. Features High Voltage Output for Varied Applications: The DC 3V-6V to 1000KV high voltage generator also contain a remarkable high voltage output. This capability opens the door to a wide range of experimental setups, scientific projects, and practical applications where such high voltage are important. Versatile Compatibility with Input Range: Operating easily within the input voltage range of 3.6V to 6V. This module offers versatility and compatibility with different power sources. This adaptability ensures its applicability across a diverse array of electronic projects. Compact and Space-Efficient Design: With dimensions 50mm x 30mm x 25mm, the module compact design provide easy integration into various electronic setups. Its space efficient form factor is ideal for projects with size constraints. Precision with Adjustable Output: The module provides users with the flexibility to fine-tune the output voltage according to specific project needs. This adjustability ensure precision in voltage control, catering to the needs of different applications. Enhanced Safety through Built-in Protection: This module prioritizes it by incorporating built in protection mechanism. These feature prevent over loading and ensure a secure and reliable high voltage generation experience. Specifications: Specification Value Input Voltage (V) 3.3V~5V DC Maximum Operating Current (A) 2 – 5 Max. Output Voltage 1000 KV Max. Output Current (A) 0.5 A Discharge Time 10s Color Black Length (mm) 8.8 Width (mm) 2.67 Height (mm) 2.3 Weight (gm) 45 Efficiency Up to 93% Main application of this DC 3V-6V to 1000KV step up high voltage generator High-Voltage Experiments and Demonstrations: This versatile DC 3V-6V to 1000KV Boost Step up Power Module is perfect for safely conduct a wide range of high voltage experiment. This module also use an important tool for showcase the principle of high voltage in a controlled environment. Education tools: Elevate your physics and electronics education with the inclusion of this module in class room activities. The adjustable high voltage output allows students to explore various aspects of electricity. And foster a hands on learning experience that enhance knowledge. Powering Electronic Projects: Integrate this module into your electronic projects that demand a reliable and adjustable high voltage power source. Its compact design and efficiency make it perfect to power various electronic applications where precise control over voltage is crucial for optimal project performance. Captivating Static Electricity: Capture the attention of audiences with captivating static electricity demonstrations. This module provides the necessary power to create visually striking and education displays. Research and Development in Electric Engineering: For professionals in electric engineering and researcher. This module also use a valuable asset in research and development. Its efficiency and versatility make it an ideal tool for testing projects in the field of electric engineering. Package Includes: 1 x 1000KV Step Up Power Module