All products · 26 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
2S 4A Type-C Lithium Battery Charging Module – 8.4V Step-Up Boost Charger for 18650 Lipo
[Step UP Buck Converter] 2S 4A Type-C Lithium Battery Charging Module – 8.4V Step-Up Boost Charger for 18650 The 2S 4A Type-C Lithium Battery Charging Module is a compact step-up charging board designed for charging 2-cell series (2S) 18650 Li-ion/Li-Po battery packs. It accepts a 3–6V DC input through USB Type-C and boosts the voltage to 8.4V, the required full-charge voltage for a 2S lithium battery pack. The 4A specification refers to the maximum input current version. According to available product specifications, the corresponding charging current is approximately 2.2A, rather than 4A. ⭐ Key Features Designed for 2S lithium-ion/Li-Po battery packs Suitable for 2 × 18650 cells connected in series USB Type-C input 3–6V DC input Recommended input: 3.7V / 5V Step-up/boost charging circuit 8.4V charging voltage 4A maximum input-current version Approximately 2.2A charging current Automatic recharge function Battery charging protection features Compact PCB design LED charging/status indication Suitable for DIY battery and portable-power projects 📋 Technical Specifications Product Type: 2S Lithium Battery Step-Up Charging Module Battery Configuration: 2S – 2 cells in series Compatible Battery: 3.6V/3.7V Li-ion / Li-Po Nominal Battery Pack Voltage: 7.4V Full-Charge Voltage: 8.4V Input Voltage: DC 3–6V Recommended Input: DC 3.7V / 5V Maximum Input Current: 4A Charging Current: Approximately 2.2A Charging Interface: USB Type-C Charging Mode: Constant-current / constant-voltage Board Size: Approximately 39 × 18 × 6.3mm Operating Temperature: -40°C to +85°C LED Indicators: Charging / fully charged or constant-voltage status 🔋 Charging Performance For the 2S 4A version: USB Type-C 5V → Boost Charging Module → 8.4V → 2S Battery Pack The module draws up to approximately 4A from the input, while the specified charging current is approximately 2.2A. This distinction is important when selecting the USB power adapter. 🔧 Applications 2S 18650 battery packs 7.4V Li-ion battery packs 2S Li-Po battery packs DIY power banks Portable electronics Bluetooth speaker battery systems Robotics projects Solar charging applications Electronic prototyping Portable audio equipment Electric fan projects Type-C rechargeable equipment Custom battery charging systems 🛠️ How It Works The module uses a boost/step-up charging circuit to convert the lower USB Type-C input voltage into the 8.4V charging voltage required for a 2S lithium battery pack. Example: 5V Type-C Input → Step-Up Circuit → 8.4V Charging Output → 2S 18650 Battery A 2S battery pack consists of two lithium cells connected in series: 3.7V + 3.7V = 7.4V nominal4.2V + 4.2V = 8.4V fully charged 💡 LED Indicators The module uses status indicators to show the charging condition: CR: Charging OK: Fully charged / constant-voltage stage ⚠️ Important Notes This module is intended for 2S battery packs only. Do not connect a single 18650 cell directly to the 8.4V charging output. The two cells should be properly matched and in good condition. Do not exceed the 6V maximum input voltage. A suitable Type-C power source is required to supply the necessary input current. The 4A rating is the input-current rating, not the battery charging current. The specified charging current for this 2S 4A version is approximately 2.2A. This charging module should not automatically be considered a replacement for a dedicated 2S BMS/protection board. Use appropriate battery protection where required. Check the PCB polarity and connection markings before connecting the battery. Do not short-circuit the input or output. Use properly matched lithium cells for safe and reliable charging. Keep the module adequately ventilated during higher-current operation. 📦 Package Includes 1 × 2S 4A Type-C Step-Up Boost Lithium Battery Charging Module – 8.4V
3.7V 700mAh 503035 Rechargeable Lithium Polymer (Li-Po) Battery for DIY Electronics, Robotics
[LiPo Cell] The 503035 3.7V 700mAh Rechargeable Lithium Polymer Battery is a compact and reliable power source designed for portable electronic devices and embedded applications. Manufactured using advanced Lithium Polymer (Li-Po) technology, it provides high energy density, lightweight construction, and excellent charge/discharge performance. In addition, the battery delivers a nominal voltage of 3.7V and a capacity of 700mAh, making it suitable for devices that require compact size with extended runtime. As a result, it is widely used in Bluetooth speakers, wireless headphones, GPS trackers, drones, robotics, IoT devices, portable medical equipment, and DIY electronics projects. Because of its slim profile, the battery can be easily integrated into compact electronic enclosures where space is limited. Furthermore, its low self-discharge rate and long cycle life ensure dependable performance over repeated charging cycles. The battery comes with pre-attached wires and a connector (connector type may vary by batch), allowing quick installation in compatible devices. Moreover, it supports safe charging using standard 3.7V Lithium Polymer battery chargers or BMS protection circuits. ⚠️ Note: Charge the battery only with a compatible Lithium Polymer charger or charging protection module. Do not short-circuit, puncture, overcharge, or expose the battery to high temperatures. 🔹 Key Features Rechargeable Lithium Polymer (Li-Po) battery High energy density Compact and lightweight design Stable 3.7V output 700mAh capacity Long charge/discharge cycle life Low self-discharge Pre-attached connection wires Suitable for portable electronic devices Reliable and safe performance 🔹 Technical Specifications Battery Type: Lithium Polymer (Li-Po) Model: 503035 Nominal Voltage: 3.7V Full Charge Voltage: 4.2V Capacity: 700mAh Battery Dimensions: Approx. 5 × 30 × 35 mm Rechargeable: Yes Charging Method: CC/CV (Constant Current / Constant Voltage) Standard Charge Voltage: 4.2V Protection Circuit: May vary depending on batch Operating Temperature: -10°C to +60°C Weight: Approximately 15–18g 🔹 Applications This battery is suitable for: Bluetooth speakers Bluetooth headsets Mini drones RC toys Robotics projects IoT devices GPS trackers Portable electronic devices DIY electronics projects Wearable electronics 🔹 Package Includes 1 × 503035 3.7V 700mAh Rechargeable Lithium Polymer Battery
702025 3.7V 400mAh rechargeable Battery for Drone, Toys, Gaming, Robotics bluetoorh Headset, Bluetooth Speaker
[LiPo Cell] The 702025 3.7V 400mAh Rechargeable Lithium Polymer Battery is a compact and high-performance power source designed for portable electronic devices requiring lightweight and reliable energy storage. Built using advanced Lithium Polymer (Li-Po) technology, it provides high energy density, low self-discharge, and consistent output voltage. In addition, the battery delivers a nominal voltage of 3.7V with a capacity of 400mAh, making it suitable for powering compact electronic devices and embedded systems. As a result, it is widely used in drones, Bluetooth speakers, Bluetooth headsets, wireless gaming accessories, robotics, GPS devices, wearable electronics, and DIY battery-powered projects. Because of its slim profile and lightweight construction, the battery can be easily integrated into space-constrained applications. Furthermore, it supports multiple charge and discharge cycles while maintaining stable performance and long service life. The battery includes a pre-attached connector with insulated leads for quick installation and safe operation. Moreover, its rechargeable design makes it an economical and environmentally friendly power solution. ⚠️ Note: Charge the battery only with a compatible 3.7V Lithium Polymer battery charger or BMS protection circuit. 🔹 Key Features Rechargeable Lithium Polymer (Li-Po) battery High energy density Compact and lightweight design Stable 3.7V output Long charge/discharge cycle life Low self-discharge rate Pre-attached connection wires Suitable for portable electronic devices Reliable and safe performance Ideal for DIY electronics projects 🔹 Technical Specifications Battery Type: Lithium Polymer (Li-Po) Model: 702025 Nominal Voltage: 3.7V Full Charge Voltage: 4.2V Capacity: 400mAh Battery Dimensions: Approx. 7 × 20 × 25 mm Rechargeable: Yes Protection Circuit: Yes Charging Method: CC/CV (Constant Current / Constant Voltage) Operating Temperature: -10°C to +60°C Weight: Approximately 6–7g 🔹 Applications This battery is suitable for: Mini drones RC toys Bluetooth headsets Bluetooth speakers Wireless gaming controllers Robotics projects GPS trackers Wearable electronics DIY electronic devices Portable rechargeable products
TP4056 1A Li-Ion Lithium Battery Charging Module with Micro USB 3.7V Charger Board
[Li-ion Rechargeable Battery Charger, Lithium Battery Protection Board] The TP4056 1A Li-Ion Lithium Battery Charging Module – Micro USB is a compact and efficient charging board designed for charging single-cell 3.7V lithium-ion and lithium polymer batteries. It features an onboard Micro USB connector, allowing direct charging from USB power sources such as computers, adapters, and power banks. In addition, the module supports external power input through the IN+ and IN- pads, making it suitable for custom battery charging applications and DIY electronics projects. As a result, users can easily integrate the module into portable devices and battery-powered systems. Because of its compact size and lightweight design, the TP4056 module is ideal for space-limited applications. Furthermore, the onboard charging management IC provides stable charging performance with high accuracy and reliable battery protection. The charging current is set to 1A by default, but it can also be adjusted by changing the onboard programming resistor. Moreover, the module includes dual LED indicators for charging status and full-charge indication. This charging module is widely used in power banks, DIY battery chargers, portable electronics, IoT devices, robotics systems, and rechargeable battery projects. 🔹 Key Features TP4056 lithium battery charging IC Onboard Micro USB input interface Suitable for 3.7V Li-Ion and LiPo batteries Default 1A charging current Adjustable charging current support Dual LED charging status indicators Compact and lightweight design High charging accuracy and stable performance Easy integration into DIY projects 🔹 Technical Specifications Product Type: Lithium Battery Charging Module Charging IC: TP4056 Input Interface: Micro USB Input Voltage: 5V DC Battery Type: 3.7V Li-Ion / LiPo Battery Default Charging Current: 1A Adjustable Current Range: 100mA – 1000mA Charging Method: Constant Current / Constant Voltage Charging Indicators: Charging LED & Full Charge LED Mounting Type: PCB Module Body Material: FR4 PCB 🔹 Applications This TP4056 charging module is suitable for many electronic applications, including: DIY power banks Rechargeable battery projects Portable electronics Robotics systems IoT devices Battery charging circuits Arduino projects DIY electronics projects 🔹 Package Includes 1 × TP4056 1A Li-Ion Lithium Battery Charging Module – Micro USB
TC4056 Type-C 1A Lithium Battery Charging Module 5V USB-C 3.7V Li-ion LiPo Charger Board
[Li-ion Rechargeable Battery Charger, Lithium Battery Protection Board] Product Description The TC4056 Type-C Lithium Battery Charging Module is a compact, efficient, and reliable solution for charging 3.7V lithium-ion and lithium polymer batteries. Designed with a modern USB Type-C input, this module ensures easy compatibility with standard chargers and power sources. It uses a proven CC/CV (Constant Current / Constant Voltage) charging algorithm, which ensures safe charging, longer battery life, and stable performance. The module is ideal for DIY electronics, power banks, portable devices, and embedded systems. With intelligent charging management, automatic cut-off, and pre-charge functionality, the TC4056 module provides complete protection and efficient charging for your batteries. ⚡ Key Features 🔋 Safe & Efficient CC/CV ChargingProvides stable and optimized charging for lithium batteries. 🔌 Type-C USB InputEasy to use with mobile chargers, USB adapters, and power banks. ⚡ Stable 1A Charging CurrentDefault charging current of 1A for fast and reliable performance. 🔴🔵 LED Charging Indicators Red LED: Charging Blue LED: Fully Charged 🧩 Compact & Lightweight DesignPerfect for space-constrained and portable applications. 🛠️ Easy IntegrationSimple connections make it beginner-friendly and ideal for DIY use. 🔄 Smart Charging Features 🔋 Automatic Charge TerminationStops charging when current drops to 100mA after full charge, protecting battery health. 🔄 Auto Recharge FunctionCharging restarts automatically when battery voltage falls below 4.05V. 🪫 Pre-Charge ModeWhen battery voltage is below 2.9V, the module charges safely at 100mA. 📊 Specifications Specification Description Charging IC TC4056 Input Voltage 5V DC (Type-C USB) Charging Current 1A (default, adjustable) Battery Type 3.7V Li-ion / Li-Po Cut-off Voltage 4.2V Charging Method CC/CV Indicators Red (Charging), Blue (Full) 🔧 Applications 🔋 18650 Battery Charging🔌 DIY Power Banks🔧 Arduino / ESP32 Projects🎮 Portable Electronics💡 Rechargeable LED Projects📦 Backup Power Systems 📦 Package Includes 1 × TC4056 Type-C Lithium Battery Charging Module
3.7V 4.2V Battery Type-C Charger Board DC-DC Step-Up Boost Module
[Lithium Battery Protection Board] The 3.7V 4.2V Battery Type-C Charger Board DC-DC Step-Up Boost Module is a compact power management module designed for single lithium batteries. It combines a charging circuit and a DC-DC step-up boost converter, allowing the battery to power devices that require higher voltage outputs. This module uses a USB Type-C interface, which provides convenient and reliable power input. As a result, it is compatible with many modern power adapters and USB chargers. In addition, the onboard boost circuit can increase the battery voltage and deliver stable output. Because of this feature, the module can power small electronics such as portable gadgets, DIY power banks, and IoT devices. The board also includes several protection functions. For example, it protects the battery from over-charging, over-discharging, short circuits, and overheating. Therefore, the battery can operate safely and maintain a longer service life. Thanks to its ultra-small and lightweight design, the module is easy to integrate into compact electronic devices and DIY electronics projects. 🔹 Key Features Supports lithium battery charging and discharging USB Type-C power input Integrated DC-DC step-up boost converter Adjustable boost output voltage Constant current and constant voltage charging Built-in over-temperature protection Charging status and fault indicator Ultra-compact and lightweight design 🔹 Technical Specifications Parameter Specification Chipset TP4056 Input Voltage 4.2V – 5.5V Output Voltage 4.2V – 24V Adjustable Maximum Power 5W Operating Temperature -40°C to 80°C Operating Humidity 5% – 95% RH Module Size 23.4 × 18 mm Weight ~5 g 🔹 Applications This module can be used in many portable electronics projects, such as: DIY power banks Portable electronics IoT devices Robotics projects Emergency backup power systems Battery-powered gadgets 🔹 Package Includes 1 × 3.7V 4.2V Battery Type-C Charger Board DC-DC Step-Up Boost Module
Out of stock146074 3.7V 10000mAh Rechargeable Lithium Polymer (Li-Po) Battery Cell for Power Bank & Electronic Devices
[LiPo Cell] The 146074 3.7V 10000mAh Lithium Polymer Rechargeable Battery Cell is a high-capacity flat Li-Po battery designed for portable electronic devices and power bank applications. With a large 10000mAh capacity, it provides long-lasting power while maintaining a compact and lightweight design. This lithium polymer cell is widely used in DIY power banks, Bluetooth speakers, tablets, GPS devices, IoT systems, portable electronics, and backup power systems. The battery includes protection circuitry compatibility and provides stable voltage output for reliable performance in demanding applications. 🔹 Key Features High capacity 10000mAh lithium polymer battery Nominal voltage 3.7V Lightweight and compact flat design Rechargeable Li-Po chemistry High energy density Stable discharge performance Suitable for portable electronics and DIY power banks 🔹 Technical Specifications Battery Type: Lithium Polymer (Li-Po) Model: 146074 Nominal Voltage: 3.7V Fully Charged Voltage: 4.2V Rated Capacity: 10000mAh Actual Capacity: 90-92% of Rated Capacity Cell Type: Flat pouch cell Charging Method: CC-CV (Constant Current / Constant Voltage) Charge Voltage: 4.2V Discharge Cut-off Voltage: 3.0V Rechargeable: Yes 🔹 Applications Power banks DIY battery packs Bluetooth speakers Portable electronics IoT devices GPS devices Tablets and handheld devices Backup power systems ⚠ Safety Instructions Do not short circuit battery terminals. Do not overcharge above 4.2V. Do not discharge below 3.0V. Use only compatible Li-Po charger or protection board. Do not puncture or expose battery to fire or heat. Do not charge unattended. Store in a cool and dry place. 🔹 Package Includes 1 × 146074 3.7V 10000mAh Lithium Polymer Battery Cell ⚠ Battery color and label may vary depending on stock batch.
3W High Power White LED with Aluminum Heatsink – High Brightness Emitter Module
[LEDs] Upgrade your lighting projects with this 3 Watt High Power LED with Aluminum Heatsink, designed for excellent brightness and long-term reliability. The LED comes pre-mounted on a solid aluminum heatsink that efficiently dissipates heat, ensuring stable performance and extended lifespan. Perfect for DIY electronics, torch lights, spotlights, emergency lights, automotive lighting, and educational projects, this LED module delivers powerful illumination with low power consumption. Easy to install and compatible with standard constant-current LED drivers, this module is a reliable choice for both hobbyists and professionals. 🔹 Key Features High brightness 3W single-chip power LED Pre-mounted aluminum heatsink for effective cooling Long lifespan and stable light output Low power consumption, energy efficient Compact and easy-to-install design Ideal for DIY projects, flashlights, lamps, and experiments 🔹 Specifications Power: 3 Watt LED Type: High Power Single Chip Color : White Forward Voltage: 3.2V – 3.6V (typical) Current: 700mA (recommended constant current) Luminous Flux: ~180 – 240 Lumens (approx.) Heatsink Material: Aluminum Mount Type: Star PCB with attached heatsink Operating Life: Up to 50,000 hours 🔹 Package Includes 1 × 3W High Power LED with Aluminum Heatsink *Image shown is a representation only.
Type-C 3S 4A 18650 Lithium Battery Charger Module | USB-C Step-Up Boost Charging Board for Li-ion
[Li-ion Rechargeable Battery Charger, Step UP Buck Converter] The 3S Type-C Charging Module Battery Charger Board is a compact and highly efficient solution for charging 18650 lithium-ion and Li-Po polymer battery packs. Designed specifically for 3S battery configurations (12.6V charging voltage), this module integrates a USB Type-C input and a high-frequency step-up (boost) circuit, making it ideal for modern portable power applications. With multiple current variants available (1A / 2A / 4A), the module offers flexibility for different power requirements. Its high switching frequency up to 1MHz ensures fast response, stable performance, and compact PCB size. The intelligent quasi-CV (constant voltage) mode compensates for voltage loss caused by internal battery resistance and PCB trace resistance, ensuring accurate and efficient charging. This charging board also features automatic recharge capability, restarting charging when battery voltage drops, and excellent adaptability to power sources with limited driving capability. Built-in protection functions safeguard the battery and connected devices from over-voltage, under-voltage, and short-circuit conditions, enhancing safety and battery lifespan. Thanks to its wide compatibility and reliable performance, this module is suitable for a broad range of applications including DIY power banks, portable electronics, solar charging systems, audio equipment, POS machines, electric fans, Bluetooth devices, and other Type-C powered equipment. ⭐ Key Features ✔ USB Type-C Input for convenient and modern charging ✔ Supports 3S Lithium Battery Packs (12.6V charging voltage) ✔ Multiple Charging Current Options: 0.37A (1A version) 0.74A (2A version) 1.48A (4A version) ✔ High Switching Frequency up to 1MHz for stable and efficient operation ✔ Quasi-CV Charging Mode compensates voltage loss ✔ Automatic Recharge Function ✔ Built-in Protection: Over-voltage, low-voltage, short-circuit ✔ Compact design, easy integration into DIY projects 🔧 Technical Specifications Battery Configuration: 3S lithium battery Supported Batteries: 18650 Li-ion / Li-Po polymer Input Voltage: DC 3–6V (Recommended: 3.7V / 5V) Input Current: Up to 4A (4A version) Charging Voltage: 12.6V Charging Current: 0.37A (1A version) 0.74A (2A version) 1.48A (4A version) Switching Frequency: Up to 1MHz Protection Functions: Over-voltage, under-voltage, short-circuit 🎯 Applications DIY power banks 18650 lithium battery packs Mobile phones & portable devices Bluetooth speakers & audio equipment Solar charging systems POS machines Cameras, MP3/MP4 players Game consoles & notebooks Type-C powered electronics 📦 Package Includes 1 × 3S Type-C Charging Module Battery Charging Board 4A Version Please note: Image Only for representation purposes. Actual products may vary as per available stock.
5V 2.4A Lithium Battery Digital Display Charging Module with Dual USB Power Bank Module
[Lithium Battery Protection Board] Dual USB Output • LED Battery Display • Built-in Protection • DIY Power Bank Module The Dual USB 5V Power Bank Charging Module is a compact and feature-rich charging and protection board designed for building custom power banks using 3.7V Lithium-Ion or Lithium Polymer batteries. Supporting both USB Type-C and Micro USB charging inputs, the module provides convenient charging compatibility while delivering stable 5V output through dual USB ports. Equipped with an intelligent boost converter, the module efficiently converts the battery voltage (3.0V–4.2V) into a regulated 5V output with a maximum output current of 2.4A, making it suitable for charging smartphones, tablets, Bluetooth devices, smartwatches, and other USB-powered electronics. The onboard digital LED display shows the battery level from 0% to 100% in real time and also indicates charging (IN) and discharging (OUT) status, allowing users to easily monitor battery capacity. Designed with multiple safety features including overcharge, over-discharge, over-current, short-circuit, and constant current protection, this module ensures safe and reliable operation. It also includes dedicated LED terminals for adding a flashlight, making it an ideal solution for DIY portable power bank project Note: This module is designed for single-cell (1S) 3.7V Lithium-Ion/Li-Po batteries connected in parallel only. Do not connect batteries in series, as doing so may permanently damage the module. ⭐ Features Supports USB Type-C and Micro USB charging input Dual USB output ports for charging two devices simultaneously Maximum output current up to 2.4A Intelligent 5V boost converter Real-time LED battery percentage display (0–100%) Charging and output status indicators Built-in flashlight LED connection High conversion efficiency Multiple protection circuits for safe operation Compact PCB design for DIY power bank projects 📋 Technical Specifications Product Type: Power Bank Charging & Protection Module Battery Type: Single Cell (1S) Lithium-Ion / Lithium Polymer Battery Voltage: 3.0V–4.2V DC Charging Input: USB Type-C & Micro USB Input Voltage: 5V DC USB Output Ports: 2 Output Voltage: 5V DC Maximum Output Current: 2.4A Display Type: Digital LED Battery Percentage Display Battery Indicator: 0–100% Status Indicators: Charging (IN) / Output (OUT) Protection Functions: Overcharge Protection Over-discharge Protection Over-current Protection Short Circuit Protection Constant Current Charging LED Flashlight Output: Supported Module Dimensions: Approx. 65 × 25 × 10 mm 🔧 Applications Suitable for: DIY Power Banks 18650 Battery Packs Lithium Battery Projects Portable USB Chargers Emergency Power Supplies Mobile Phone Chargers Bluetooth Speaker Power Banks Raspberry Pi Power Supply Arduino Projects Portable Electronics DIY Electronics Battery Backup Systems 📦 Package Includes 1 × Dual USB 5V Type-C & Micro USB Power Bank Charging Module with LED Display ⚠️ Important Notes Connect the battery correctly: B+ to battery positive and B- to battery negative. Incorrect battery polarity may permanently damage the module. Use 3.7V Lithium-Ion or Li-Po batteries only. If using multiple cells, connect them only in parallel. Do not connect batteries in series, as this may cause overheating and permanent module failure. Quick Charge performance depends on the connected device, charging cable, charger, and battery quality.
Type-C USB Input High Current 3A Polymer Ternary Lithium Battery Quick Fast Charging Board IP2312 CC/CV Mode 5V To 4.2V
[Lithium Battery Protection Board] Power your projects with the Type-C USB Input 3A Lithium Battery Fast Charging Board (IP2312) — a compact, high-efficiency charging solution designed for 3.7V lithium-ion and lithium polymer batteries. Built around the advanced IP2312 main control chip, this module delivers fast, stable, and intelligent charging using a full CC/CV (Constant Current / Constant Voltage) charging algorithm. It ensures optimal battery health, safety, and performance while supporting high current charging up to 3A, making it ideal for modern DIY electronics and portable power applications. The Type-C input interface provides universal compatibility with standard 5V USB power sources, while onboard indicator LEDs clearly display charging status. ⚠️ Note: Not suitable for 3.2V LiFePO4 (Lithium Iron Phosphate) batteries Key Features ⚡ High Current Fast Charging (Up to 3A)Supports rapid charging for lithium-ion/polymer batteries, reducing charging time significantly. 🔋 Advanced CC/CV Charging TechnologyEnsures safe and efficient charging with automatic switching between charging stages. 🔌 Type-C USB InputModern and widely compatible input interface (4.5V–5.5V), easy to power from adapters, power banks, or USB ports. 🧠 Smart Charging Management (IP2312 Chip)Automatically adjusts charging mode based on battery voltage for maximum safety and efficiency. 🔴🔵 LED Status Indicators Red LED: Charging in progress Blue LED: Fully charged 🛠️ Compact & Easy IntegrationSmall size makes it perfect for embedded systems, DIY battery packs, and portable devices. Charging Working Principle 🔹 Trickle Charging Mode (< 3V)When battery voltage is below 3V, the module charges with a safe low current (~100mA). 🔹 Constant Current Mode (> 3V)Once voltage exceeds 3V, it switches to constant current charging (up to 3A). 🔹 Constant Voltage Mode (~4.2V)As the battery approaches full charge, it maintains voltage while gradually reducing current. 🔹 Auto Cut-Off & Recharge Charging stops when current drops below 300mA Automatically resumes charging if voltage drops below 4.1V Specifications Specification Description Main Chip IP2312 Charging Mode CC/CV (Constant Current / Voltage) Input Voltage 4.5V – 5.5V (Type-C USB) Charging Current Up to 3A Battery Type 3.7V Li-ion / Li-Po Cut-off Voltage 4.2V / 4.35V Indicator LEDs Red (Charging), Blue (Full) Dimensions 34.5mm × 15mm Applications 🔋 DIY lithium battery packs🔌 Power bank projects🚗 Portable electronics & gadgets🔧 Arduino / ESP32 battery systems🔦 Rechargeable lighting systems📦 Embedded battery charging modules Package Includes 1 × Type-C USB 3A Lithium Battery Fast Charging Board (IP2312)
400W DC-DC Step-up Boost Converter Constant Current Power Supply Module LED Driver Step Up Module
[Step UP Buck Converter] This is a great 400W DC to DC step-up power supply module for electric equipment, digital products, laptop, etc. Input and output are designed with screw terminals for convenient wire connection and disconnection. High efficiency, the maximum conversion efficiency can be 96% and efficiency is related to input/output voltage, current and voltage difference. There are 2 heat sinks that would ensure a better heat dissipation. It can also be used as a driver for high power LED lights or voltage regulator for solar panels. Features: Input and output are designed with screw terminals for convenient wire connection and disconnection. High efficiency, the maximum conversion efficiency can be 96% and efficiency is related to input/output voltage, current and voltage difference. There are 2 heat sinks that would ensure a better heat dissipation. It can also be used as a driver for high power LED lights or voltage regulator for solar panels. Output Voltage/Current Adjustment: Adjust "CV-ADJ" potentiometer clockwise to reduce voltage, counterclockwise to increase voltage. Adjust "CC-ADJ" potentiometer counterclockwise about 30 circles to minimize the output current before connecting to load(clockwise to increase current, counterclockwise to reduce current). Then adjust "CC-ADJ" clockwise to the current value you need. If you use the module for battery charging, connect to output after battery is fully discharged. Because if the more energy is left in battery, the less charging current will be. Specification: Input Voltage: DC 8.5V to 50V Output Voltage: DC 10V to 60V Max. Input Current: 15A Max. Output Current: 12A Quiescent Current: 10mA Constant Current Range: 0.2A to 12A Operating Temperature: -40° to 85° Package Included: 1 x Boost Module 400W DC-DC Step-up Boost Converter Constant Current Power Supply Module 15A Step-Up LED Driver
12.6V 2A Lithium-ion Battery charger for 18650/26700 NMC Battery Pack with CC and CV
[Adaptor Power Supply] The 12.6V 2A Li-ion Battery Pack Smart Charger is a high-performance SMPS-based charging solution designed specifically for 3S (11.1V nominal) lithium-ion battery packs. Delivering a stable constant output voltage of 12.6V and a constant charging current of 2A, this charger ensures fast, efficient, and safe charging for lithium battery systems. Built with advanced control circuitry, the charger automatically switches between constant current (CC) and constant voltage (CV) charging modes to protect the battery and maximize its lifespan. The built-in cooling fan provides excellent heat dissipation, allowing continuous operation under heavy load. For maximum safety, the charger features output overload and short-circuit protection. In case of a fault, the charger enters an auto-restart protection mode, alternately enabling and disabling the power MOSFET until the fault condition is removed — effectively protecting both the charger and the battery pack. With a wide AC input range of 100–270V, this charger works reliably in Indian and international power conditions. Its compact table-top design with C14 socket input makes it ideal for DIY battery packs, power backup systems, robotics, solar storage, and portable energy solutions. ⭐ KEY FEATURES ✔ Designed for 3S Lithium-Ion Battery Packs (12.6V charging)✔ Constant Voltage & Constant Current Charging (CC/CV Mode)✔ Output: 12.6V DC, 2A (25W)✔ Built-in Overload & Short-Circuit Protection with Auto Restart✔ Cooling Fan for efficient heat dissipation✔ Wide Input Voltage Range: 100–270V AC✔ High efficiency & stable output✔ Ideal for DIY battery packs, robotics, solar & backup systems 🔧 TECHNICAL SPECIFICATIONS Category: Lithium-Ion Battery Charger (SMPS) Wattage: 25W Output Voltage: DC 12.6V Output Current: 2A Charging Mode: Constant Voltage / Constant Current (CV / CC) Input Voltage: AC 100 – 270V Input Frequency: 47 – 63 Hz Input Current: 0.69 A Single Output: 12.6V / 2A Socket Type: C14 Cooling: Built-in Cooling Fan Operating Temperature: Up to 85°C 🎯 APPLICATIONS 3S lithium-ion battery packs DIY power banks & battery projects Robotics & automation systems Solar energy storage UPS & backup battery charging Electric mobility & embedded systems 📦 PACKAGE INCLUDES 1 × 12.6V 2A Table Top Smart 25W Lithium-Ion Battery Charger
4S 30A Battery Management System ( BMS ) – LifePO4
[Lithium Battery Protection Board] Description Introducing Roboway 4S 30A Battery Management System BMS for LiFePO4 battery at best price in India. It is specially design for superior battery protection and management. This 4S BMS LiFePO4 ensure optimal performance and long life of your lithium iron phosphate battery. With its advanced feature it offer reliable protection against overcharging, over discharging, and short circuit. This Roboway 4S LiFePO4 BMS is ideal for applications who need high current management. It support 30A continuous discharge & make it perfect for high demand device. This BMS 4S is easy to install and integrate easily into your existing battery setup. Its compact design allow for flexible placement in various configuration. This 4s bms system provide easy balancing to ensure all cell are evenly charged. With this 4S BMS LiFePO4 you can extend the life of your battery and maintain their performance. Features Overcharge Protection: This 4s BMS prevent overcharging by disconnecting the circuit at high voltage level. It also ensure the safety and long life of the LifePO4 battery cell. Over discharge Protection: This system cut off the load when battery voltage drops too low. This feature protects the cells from damage due to deep discharge. Overcurrent Protection: This 4s bms lifepo4 include overcurrent protection to prevent damage from excessive current flow. This feature maintain the reliability and safety of the battery pack. Cell Balancing: Its integrated cell balancing ensure even charge and discharge across all cell. This optimizes performance and extend the overall battery lifespan. Specification Specification Details Battery Type LiFePO4 (Lithium Iron Phosphate) Number of Cells 4S (4 series) Nominal Voltage 12.8V (3.2V per cell x 4 cells) Continuous Discharge Current 30A Peak Discharge Current 56A Overcharge Protection Voltage 3.65V per cell Overdischarge Protection Voltage 2.5V per cell Balance Charging Voltage 3.6V per cell Balance Current 50mA Short Circuit Protection Yes Overcurrent Protection Yes Temperature Protection Yes Dimensions 70mm x 45mm x 12mm Weight 35g Operating Temperature Range -20°C to 60°C Charging Current 10A Balance Function Yes (active balancing) Charging Voltage: 14.8V to 18V Charge Current: 20A (max) Constant Discharge Current: 30A Max discharge current: 56 A Overcharge detection: 3.75V ± 0.05V Overcharge Release: 3.6V ± 0.05V Over discharge Detect: 2.1V ± 0.08V Over Discharge Release: 2.3V ± 0.1V Over current Protection: 56 ± 10 A over current Protection Release Condition: Cut Load Connections: Package Includes: LifePO4 4S 30A Battery Management System x 1 JST XH 5 pin Right Angle Connector x 1 JST XH 5 pin Cable x 1
EU Plug Universal Battery Charger For 18650 16340 14500 Li-ion Rechargeable Battery Charger
[Li-ion Rechargeable Battery Charger, Lithium Battery And Accessories] 🔋 Universal Li-ion Battery Charger for 18650, 16340 & 14500 Rechargeable Batteries (EU Plug) Intelligent Charging • Automatic Cut-Off • LED Charging Indicator • Wide Voltage Input • Safe & Reliable The Universal Li-ion Battery Charger is a compact and reliable charging solution designed for 3.7V rechargeable lithium-ion batteries such as 18650, 16340 (RCR123A), and 14500 cells. Featuring a European (EU) plug, this charger is ideal for home, office, laboratory, and travel use. The charger automatically detects the battery charging status and provides safe, intelligent charging with automatic cut-off when the battery reaches full capacity. The built-in LED status indicator displays Red/Orange while charging and changes to Green when charging is complete, ensuring convenient monitoring. Designed with built-in protection against overcharging, short circuits, and reverse polarity, this charger helps extend battery life while providing safe and efficient charging performance. Its spring-loaded battery slot accommodates multiple cylindrical Li-ion battery sizes, making it a versatile charger for hobbyists, technicians, and electronics enthusiasts. Note: This charger is designed only for 3.7V Li-ion rechargeable batteries. It is not compatible with LiFePO₄, NiMH, NiCd, or primary (non-rechargeable) batteries. ⭐ Features Universal charger for multiple Li-ion battery sizes Compatible with 18650, 16340 (RCR123A), and 14500 rechargeable batteries European (EU) AC plug Intelligent automatic charging control Automatic charging cut-off when battery is fully charged LED charging status indicator Red/Orange LED while charging Green LED when charging is complete Built-in overcharge protection Reverse polarity protection Short-circuit protection Compact, lightweight, and portable design Easy plug-and-play operation 📋 Technical Specifications Product Type: Universal Li-ion Battery Charger Plug Type: EU Plug Input Voltage: 100–240V AC, 50/60Hz Output Voltage: 4.2V DC Charging Current: Approx. 400mA–1000mA (depending on model/batch) Battery Chemistry: Lithium-Ion (Li-ion) Supported Battery Sizes: 18650 16340 (RCR123A) 14500 Charging Method: Constant Current / Constant Voltage (CC/CV) Charging Indicator: Red/Orange – Charging Green – Fully Charged Protection Features: Overcharge Protection Reverse Polarity Protection Short-Circuit Protection Body Material: Flame-Retardant ABS Plastic Color: Black 🔧 Applications Suitable for: 18650 Lithium-Ion Batteries 16340 (RCR123A) Batteries 14500 Rechargeable Batteries LED Flashlights Rechargeable Torches DIY Battery Packs Portable Electronic Devices Electronics Laboratories Hobby Projects Battery Maintenance Educational Projects 📦 Package Includes 1 × Universal Li-ion Battery Charger (EU Plug) ⚠️ Note Compatible only with 3.7V rechargeable Li-ion batteries. Do not use with LiFePO₄ (3.2V), NiMH, NiCd, or non-rechargeable batteries. Battery is not included. Charging current and charger appearance may vary slightly depending on the manufacturing batch.
Out of stock4V DC LED Square shape High brightness LED Aluminum Yellow bead COB strip light bulb pack of 1pcs
[COB LED] 4V DC LED Square shape High brightness LED Aluminum Yellow bead COB strip light bulb pack of 1pcs This is a special type of high-power COB LED light. This LED produces high power lighting compare to LEDs that are present in the market. With no wire, these COB LED lights to provide less fuss and have limitless applications. These COBs have tiny metallic contacts that can be directly soldered to wires. Our high-power COB LEDs are energy efficient and provide a superior lighting experience. This LED works on low power up to 1W. This type of LED provides long life and solid-state reliability. PACKAGE INCLUDES This is the pack of a single piece of 4V DC LED Square shape High brightness LED Aluminum Yellow bead COB strip light bulb Features Lower operating and manufacturing cost Uniform consistent bright light Reliable and constant LED Environmentally friendly Flexible design
Out of stockB3 AC Compact Balance Charger for 2S-3S LiPo
[Uncategorized] The B3 Compact charger is a very simple to use charger for 2S and 3S battery packs. No need for additional power supplies or 12v batteries as this little unit has its own built-in power supply that can be powered with 100-240v. The B3 is very easy to use, simply plug it into the mains power and the 3 LEDs will light green and then flash to red to indicate the charger is ready. Connect the balance lead of your battery to the balance port of the charger, after 2 secs the charger detects the voltage of the battery and starts charging. When the charger starts charging the LEDs will glow constant red, if the battery is a 2 cell then the cell LED indicators 1 and 2 will glow constantly if it is a 3 cell then the cell 3 LED indicator will also glow. When a cell is completely charged the corresponding LED will turn green, when all cells turn green the battery is fully charged, disconnect the battery before switching off the charger. Features and Specifications of B3 Lithium Polymer (Li-Po) Battery Charger:- Built-in power supply 100~240V Compatible Automatic charge start Simple, reliable and safe to use AC Input: 100~240V, 50~60Hz Battery Type: LiPoly Cell Count: 2~3 Cells Charge Current: 1.2A Max Cell Cut Off Voltage: 4.2V + 0.02V Circuit Power: 11W + 10% Dimensions: 88x57x35mm Weight: 103g Plug: US 2 Pin Plug * Product Images are shown for illustrative purposes only and may differ from the actual products.
250W High Power Constant voltage Current Adjustable Aluminum Substrate LED Driver Module
[Step UP Buck Converter] The 250W High Power DC-DC Boost Converter with Constant Voltage & Constant Current Control is a versatile and efficient power module designed for demanding applications such as LED driving, battery charging, and power supply systems. Built on an aluminum substrate for superior heat dissipation, this module ensures stable performance even under high load conditions. It supports adjustable output voltage (10V–50V) and current control up to 6A (10A peak), making it ideal for precision applications. With high efficiency up to 96%, premium components, and dual potentiometer control, this module delivers reliable and customizable power output for both hobbyists and professionals. Key Features ⚡ High Power Output (Up to 250W)Supports high-power applications with stable voltage and current control. 🔧 Adjustable Voltage & CurrentFine-tune output using onboard multi-turn potentiometers for accurate control. 🔥 Aluminum Substrate Heat DissipationIntegrated heat sink design ensures continuous operation under heavy load. 📈 High Efficiency (92%–96%)Minimizes power loss and improves system performance. 🧠 Stable Constant Current OutputLow temperature drift (<1%) ensures reliable performance for LED applications. 🔌 Wide Application SupportSuitable for LED drivers, battery charging, solar systems, and DIY power supplies. Specifications Specification Description Module Type Non-Isolated Boost Converter Output Voltage 10V – 50V (Adjustable) Output Current Up to 6A (10A peak) Constant Current Range 0.2A – 6A Output Power Up to 250W Efficiency 92% – 96% Input Voltage 10V – 40V Static Current 10mA Mounting 4 × 3mm Screw Holes Cooling Aluminum Substrate Applications 💡 High Power LED Driver🔋 Battery Charging (Li-ion, Lead Acid, etc.)☀️ Solar Power Regulation🚗 Vehicle Power Supply Systems🔧 DIY Adjustable Power Supply💻 Laptop & Portable Device Power Usage Instructions Connect VIN+ / VIN- to input power supply Connect OUT+ / OUT- to load Adjust RV1 (Voltage) as per requirement Adjust RV2 (Current) based on load ⚠️ Always set voltage/current before connecting load Precautions Do not reverse input/output polarity Ensure proper heat dissipation at high load Input voltage must be at least 2V lower than output Avoid exceeding maximum current/power limits Do not adjust current using short circuit method Package Includes 1 × 250W High Power DC-DC Boost Converter Constant Voltage & Current Module
220 Ohm Carbon Film Resistor
[Through Hole Resistor] Resistors are used for many purposes. A few examples include limiting electric current, voltage division, heat generation, matching and loading circuits, gain control, and setting time constants. They are commercially available with resistance values over a range of more than nine orders of magnitude Specifications: Resistance (Ω): 220 Tolerance(%): 5 Maximum Working Voltage (V): 250 Maximum Overload Voltage (V): 500 Temperature Co-efficient: ±50 ppm/°C Operating Temperature Range (°C): –40 to 150 Mounting Type: Through Hole
10A 300W DC-DC Step-Down Adjustable Constant Voltage & Constant Current Module XL4016
[Step Down Buck Converter] 10A 300W DC-DC Step-Down Adjustable Constant Voltage & Constant Current Module XL4016 The 10A 300W DC-DC Step-Down Adjustable Constant Voltage & Constant Current Module is a high-power adjustable buck converter designed for applications requiring regulated output voltage and controlled output current. It can be used as a high-power LED driver, battery charging module, regulated power supply, and vehicle power supply. The module features independent CV (Constant Voltage) and CC (Constant Current) adjustment using onboard 3296 multi-turn potentiometers, allowing precise adjustment of the output voltage and current. A dual heatsink design helps dissipate heat from the power components during high-power operation. With a maximum advertised power rating of up to 300W, the module is suitable for high-power applications when adequate cooling and an appropriate input supply are provided. For continuous high-current operation, additional forced-air cooling is recommended. ⭐ Key Features Up to 300W output power 10A maximum output current Adjustable constant voltage and constant current CV and CC independent adjustment Output voltage continuously adjustable Typical output voltage range: 1.25V–35V High-power DC-DC step-down/buck converter Dual heatsink design for improved heat dissipation Independent heatsink for MOSFET/Schottky diode section 3296 multi-turn potentiometers for precise adjustment High-frequency capacitors for reduced output ripple Large Sendust core Double pure-copper winding Suitable for LED driver and battery charging applications Additional cooling recommended for continuous high-power operation 📋 Technical Specifications Product Type: DC-DC Step-Down Buck Converter Function: Constant Voltage / Constant Current Maximum Output Power: Up to 300W Maximum Output Current: 10A Recommended Continuous Current: Up to approximately 8A with additional cooling Output Voltage: Continuously adjustable, approximately 1.25V–35V Minimum Voltage Difference: Approximately 1V Adjustment: CV / CC Multi-Turn Potentiometers Potentiometer Type: 3296 Multi-Turn Operating Temperature: -40°C to +85°C Output Ripple: Approximately 50mV under the stated test conditions Cooling: Dual Heatsink Additional Cooling: Cooling fan recommended for continuous high-power operation Converter Type: Step-Down / Buck 🔧 Applications High-Power LED Driver Constant Current LED Power Supply Lithium Battery Charging Lead-Acid Battery Charging Ni-Cd / Ni-MH Battery Charging 6V Battery Charging 12V Battery Charging 14V Battery Charging 24V Battery Charging Solar Panel Power Systems Wind Generator Applications Vehicle-Mounted Power Supply Laptop Power Supply Regulated DC Power Supply Low-Voltage Power Supply Systems 🎛️ CV & CC Adjustment The module has two independent multi-turn adjustment potentiometers: CV (Constant Voltage): Adjusts the required output voltage. CC (Constant Current): Adjusts the maximum/constant output current. Turn the potentiometers clockwise to increase and anticlockwise to decrease the corresponding setting. Use a reliable multimeter while adjusting the output voltage and current. 🔋 Battery Charger Application Determine the required battery charging voltage and charging current. Connect a suitable DC input supply to the module while observing correct polarity. Use the CV adjustment to set the required charging voltage. Use the CC adjustment to set the required charging current. Connect the battery to the output while observing correct polarity. Monitor the charging process and ensure the voltage and current remain within the battery manufacturer's specifications. 💡 Constant Current LED Driver Application Determine the LED's required operating current and maximum operating voltage. Adjust the output voltage to a low safe level before connecting the LED. Use the CC adjustment to set the required LED current. Adjust the CV setting according to the LED's required operating voltage. Connect the LED and verify the output voltage and current with a multimeter. 🛠️ Adjustment Instructions If the output voltage initially follows the input voltage and cannot be adjusted, turn the appropriate potentiometer counterclockwise for multiple turns and then adjust again. Turn the adjustment potentiometers clockwise to increase and anticlockwise to decrease. Always use a multimeter when setting voltage or current. The potentiometer closest to the output side is specified for CC/current adjustment. The potentiometer closest to the input side is specified for CV/voltage adjustment. 📦 Package Includes 1 × 10A 300W DC-DC Step-Down Adjustable Constant Voltage & Constant Current Module ⚠️ Precautions This is a step-down (buck) converter; the input voltage must be higher than the required output voltage. Do not exceed the module's maximum voltage, current, or power limits. 300W is the maximum advertised power rating; actual continuous power depends on input voltage, output voltage, current, efficiency, and cooling. For continuous high-current operation, use a cooling fan with the heatsink. Do not short-circuit the output. Observe correct input and output polarity. Use appropriate protection when charging batteries. Never leave a battery charging unattended. Ensure the module's heatsink does not become excessively hot during operation.
ESP WROOM32 MCU Development Module – 38 Pin
[ESP Modules] This is ESP WROOM 32 MCU Development Module. ESP WROOM 32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding. The WROOM32 based modules with integrated flash. These modules are well suited for Wi-Fi and Bluetooth/Bluetooth LE-based connectivity applications and provide a solid dual-core performance and the clock frequency is adjustable from 80 MHz to 240 MHz. The user may also use power saving mode for the CPU and make use of the low-power coprocessor to constantly monitor the peripherals for changes or crossing of thresholds. ESP32S integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, low-noise sense amplifiers, SD card interface, Ethernet, high-speed SDIO/SPI, UART, and I²C. Using Bluetooth, users can connect to their phone or broadcast low energy beacons for its detection. The use of Wi-Fi enables a large physical range, as well as a direct connection to the internet via a Wi-Fi router. Perfect for wearable electronic or battery-powered applications, the ESP32 chip uses less than 5µA. In addition, this module can support data rates of up to 150 Mbps and 22 dBm output power at the PA in order to allow for the widest physical range. ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller. The ESP32 is integrated with Antenna switches, RF Balun, power amplifiers, low-noise amplifiers, filters, and management modules, and the entire solution occupies the least area of PCB. 2.4 GHz Wi-Fi plus Bluetooth dual-mode chip, with TSMC Ultra-low power consumption 40nm technology, power dissipation performance, and RF performance is the best, safe and reliable, easy to extend to a variety of applications. Features: High performance-price ratio Small volume, easily embedded to other products Strong function with support LWIP protocol, Freertos Supporting three modes: AP, STA, and AP+STA Supporting Lua program, easily to develope Package Includes: 1 x ESP32 38Pin Development Board
Out of stock8 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
[RGB LED Strip] Outer Diameter: 32 mm. Supply Voltage: DC 4-7V. LED Driver IC: WS2812 Communication interface: single wire communication. Send data at speeds of 800Kbps. The color of the light was highly consistent Full-color module, Full-color soft lights a lamp strip. The 8Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board has round black shape, let us be clear at a glance! 8 super bright smart NeoPixels LED arranged in a 28mm outside diameter circular PCB. These ring RGB lamps can be simply connected via the output pin cascade one to the other’s input pin (DI-DO). In this way, by using only one single chip you will be able to control as many LED lights as possible, each LED lamp is integrated with a driver chip in it so that our LED becomes intelligent and addressable. Each has a -18mA constant current drive, so the LED color will be very uniform, even if the voltage change is the same, do not need an external resistor current limiting resistor to make the overall design of the RGB lamp ring to become slim, as you see so simple and easy to use. With 5V power supply to drive the RGB lamp ring. Characteristic : Single wire communication, to maximize the reduction of I/O port pressure, and the use of the RGB WS2812B driver chip, so that the peripheral circuit requires only a single capacitor can meet the needs of the circuit, give people the enjoyment of beauty, in addition, this RGB ring, but also through a simple Dout input port, and the other using the same chip RGB lamp cascade, without need considering the shape of the limit. Features : The control circuit and the LED share the only power source. Control circuit and RGB chip are integrated into a package of 5050 components, form a complete control of pixel point. Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate. Built-in electric reset circuit and power lost reset circuit. Each pixel of the three primary colors can achieve 256 brightness levels, or 16M colors full-color display, and scan frequency not less than 400Hz/s. Cascading port transmission signal by a single line. Any two points the distance more than 5m transmission signal without any increase circuit. When the refresh rate is 30fps, cascade number is not less than 1024 points. Send data at speeds of 800Kbps. The color of the light was highly consistent Full-color module, Full-color soft lights a lamp strip. LED decorative lighting, Indoor/outdoor LED video irregular screen. Package Includes : 1 x 8Bit RGB Lamp Ring Development Board
Out of stock24 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
[RGB LED Strip] The 24 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board has round black shape, let us be clear at a glance! 24 super bright smart NeoPixels LED arranged in a 86mm outside diameter circular PCB. These ring RGB lamps can be simply connected via the output pin cascade one to the other’s input pin (DI-DO). In this way, by using only one single chip you will be able to control as many LED lights as possible, each LED lamp is integrated with a driver chip in it so that our LED becomes intelligent and addressable. Each has a -18mA constant current drive, so the LED color will be very uniform, even if the voltage change is the same, do not need an external resistor current limiting resistor to make the overall design of the RGB lamp ring to become slim, as you see so simple and easy to use. With 5V power supply to drive the RGB lamp ring. Characteristic : Single wire communication, to maximize the reduction of I/O port pressure, and the use of the RGB WS2812B driver chip, so that the peripheral circuit requires only a single capacitor can meet the needs of the circuit, give people the enjoyment of beauty, in addition, this RGB ring, but also through a simple Dout input port, and the other using the same chip RGB lamp cascade, without need considering the shape of the limit. Features : The control circuit and the LED share the only power source. Control circuit and RGB chip are integrated into a package of 5050 components, form a complete control of pixel point. Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate. Built-in electric reset circuit and power lost reset circuit. Each pixel of the three primary colors can achieve 256 brightness levels, or 16M colors full-color display, and scan frequency not less than 400Hz/s. Cascading port transmission signal by a single line. Any two points the distance more than 5m transmission signal without any increase circuit. When the refresh rate is 30fps, cascade number is not less than 1024 points. Send data at speeds of 800Kbps. The color of the light was highly consistent Full-color module, Full-color soft lights a lamp strip. LED decorative lighting, Indoor/outdoor LED video irregular screen. Package Includes : 1 x 24 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
WS2812B 4×4 RGB LED Module
[LED/LCD Display Module] The WS2812B 4 x 4 RGB LED Module has built-in Full-Color Driving Lights Circular Development Board, and a round black shape. 16 super bright smart Neo Pixels LED arranged in a 68mm outside diameter circular PCB. These ring RGB lamps can be simply connected via the output pin cascade one to the other’s input pin (DI-DO). In this way, by using only one single chip you will be able to control as many LED lights as possible, each LED lamp is integrated with a driver chip in it so that our LED becomes intelligent and addressable. Each has a -18mA constant current drive, so the LED color will be very uniform, even if the voltage change is the same, do not need an external resistor current limiting resistor to make the overall design of the RGB lamp ring to become slim, as you see so simple and easy to use. With a 5V power supply to drive the RGB lamp ring. Single wire communication, to maximize the reduction of I/O port pressure, and the use of the RGB WS2812B driver chip, so that the peripheral circuit requires only a single capacitor can meet the needs of the circuit, give people the enjoyment of beauty, in addition, this RGB ring, but also through a simple Dout input port, and the other using the same chip RGB lamp cascade, without need considering the shape of the limit. Features : The control circuit and the LED share the only power source. The control circuit and RGB chip are integrated into a package of 5050 components, form a complete control of pixel points. Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate. Built-in electric reset circuit and power lost reset circuit. Each pixel of the three primary colors can achieve 256 brightness levels, or 16M colors full-color display, and scan frequency not less than 400Hz/s. Cascading port transmission signal by a single line. Any two points the distance more than 5m transmission signal without any increase circuit. When the refresh rate is 30fps, the cascade number is not less than 1024 points. Send data at speeds of 800Kbps. The color of the light was highly consistent Full-color module, Full-color soft lights a lamp strip. LED decorative lighting, Indoor/outdoor LED video irregular screen. Package Includes : 1 x WS2812B 4 x 4 RGB LED Module.