All products · 6 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Logitech G Yeti USB Mic
USB condenser with four polar patterns (cardioid / bidirectional / omni / stereo). Streaming staple.
Out of stockElgato Wave:3 USB Condenser Mic
Premium USB cardioid condenser, 24-bit / 96 kHz, Clipguard, Wave Link mixer.
Out of stockBlue Yeti X USB Mic
Four-capsule USB condenser, real-time LED metering, 4 pickup patterns.
Out of stock9mm x 7mm Through Hole MIC Electret Microphone Condenser Pickup
[Buzzer And Mic] Electret Microphone Condenser Mic Sensitivity 9 x 7mm SMD SMT PCB Surface mount, cylinder-shaped It is a converted the voice signal to electrical signals energy conversion device Widely used in the cassette recorder, wireless microphone and voice control circuits With high resistance to vibration, high signal to noise ratio 100% Brand New and High Quality. It is back electret type
Laser Module 650NM 5V
[Laser Module] Voltage: 3.0 V – 5 V. Driver: APC circuit. Line length: about 135 mm. Transmit power: 58mW. Operating Current: 40mA. Operating Current: 40mA. Operating temperature: -36◦C ~ 65◦C. The LASER MODULE 650NM 5V head is composed of a light-emitting tube, condenser lens, and adjustable copper sleeve and it is assembled when delivered, the focal length of the lens is adjusted glued by strong glue stick, which can work directly after connecting to a 5V DC power supply. Laser Diode Module is a breadboard friendly, low cost having the wavelength of 650nm and operating voltage of 5V. The laser head is composed of a light-emitting tube, condenser lens and adjustable copper sleeve and it is assembled when delivered, the focal length of the lens is adjusted glued by strong glue stick, which can work directly after connecting to a 5v dc power supply. Pay attention to the laser cell to prevent from being burnt or battery explosion due to a short circuit when removing the battery. PINOUT 1 – GND 2 – 5V 3 – S (Control: HIGH = Laser on) Applications : Laser test tools. Concentricity positioning. Medical equipment positioning. Production of signal equipment. Use for DIY or robots. All kinds of level meters. Laser projector. Laser toys, etc. Warning!!! This is a low power laser device, however as with all laser devices care should be taken when in use. You should never look directly in to its beam or point the laser at another person. Doing so may cause permanent eye damage. This item is not suitable for children. Package Includes : 1 x LASER MODULE 650NM 5V.
Sound Detection Sensor Module Red/Blue for Arduino/Raspberry Pi/Other Microcontrollers
[Audio Sensor] Sound Detection Module Sensor for Intelligent Vehicle Compatible With Arduino is a Single channel signal output Sensor. The output is effective to the low-level sound signal with good fidelity, When there is sound, outputs low level and signal light. It can be used for Acoustic control light, give sound and light alarm working with the Photosensitive sensor, and sound control, sound detect. (The Maximum induction distance is 0.5M) Note: This sensor only recognizes the availability of sound (vibration principle) cannot identify the size of the sound or the specific frequencies of sound. Features : Uses LM393, Electret condenser microphone Signal output Indication Single-channel signal output The output effective signal is low level. Can detect the intensity of the sound environment With the retaining bolt hole, convenient installation.