All products · 63 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Arctic P12 PWM PST 5-Pack
Five 120mm pressure-optimised fans for the price most brands charge for one. Daisy-chain via PST.
1K Ohm Rotary Potentiometer Round Shaft 3 Pin Elcon
[Potentiometer] 1KΩ Rotary Potentiometer Round Shaft Elcon The 1KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 1KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 10mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 1KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 10mm Body Diameter / Width: 16mm Total Height: Approx. 25mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 1KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 1KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch before installation.
5K Ohms Rotary Potentiometer Round Shaft 3 Pin Elcon
[Potentiometer] 5KΩ Rotary Potentiometer Round Shaft Elcon The 5KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 5KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 13mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 5KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 13mm Body Diameter / Width: 16mm Total Height: Approx. 28mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 5KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 5KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch
Blivex LFP32700 3.2V 6Ah LiFePO₄ Rechargeable Battery Cell
[LiFePO4 Battery Cell] 🔋 Blivex LFP32700 3.2V 6Ah LiFePO₄ Rechargeable Battery Cell High Capacity • Long Cycle Life • High Discharge Performance • Ideal for Energy Storage & Electric Vehicles The Blivex LFP32700 3.2V 6Ah LiFePO₄ Rechargeable Cell is a premium cylindrical lithium iron phosphate (LiFePO₄) battery designed for high-performance energy storage and power applications. Featuring a nominal voltage of 3.2V, 6Ah capacity, and up to 18A continuous discharge current, this cell delivers stable output voltage, excellent safety, and long service life. The specification identifies the product as a LFP32700-6.0Ah LiFePO₄ cylindrical rechargeable cell. Manufactured with a robust steel enclosure, the battery offers excellent resistance to vibration, shock, and harsh operating conditions while maintaining low self-discharge and high energy efficiency. It is suitable for battery packs used in electric vehicles, solar energy storage systems, portable power stations, communication backup systems, robotics, and industrial equipment. The datasheet also highlights its sturdy steel case, high capacity, long cycle life, stable output voltage, and good high/low temperature performance. Datasheet : Click Here To Open ⭐ Features High-capacity 6Ah LiFePO₄ cylindrical cell Nominal voltage of 3.2V Excellent cycle life of 2000+ cycles High continuous discharge capability up to 18A (3C) Peak pulse discharge current up to 30A (5C) Low internal resistance (≤8mΩ) Stable output voltage Low self-discharge High safety and thermal stability Sturdy pressure-resistant steel casing Excellent vibration and shock resistance Suitable for battery pack assembly 📋 Technical Specifications Brand: Blivex Model: LFP32700-6.0Ah Battery Chemistry: Lithium Iron Phosphate (LiFePO₄) Battery Type: Cylindrical Rechargeable Cell Nominal Voltage: 3.2V Nominal Capacity: 6.0Ah Energy Density: 142Wh/kg Internal Resistance: ≤8mΩ (AC, 1000Hz) Limited Charge Voltage: 3.65V Charge Method: CC/CV Standard Charge Current: 0.5C Maximum Charge Current: 1C Charge Cut-off Current: 0.3A Discharge Cut-off Voltage: 2.0V Standard Discharge Current: 6A (1C) Maximum Continuous Discharge Current: 18A (3C) Maximum Pulse Discharge Current: 30A (10 seconds) Cycle Life: 1500 Cycles (25°C, 100% DOD) Charge Temperature: 0°C to 60°C Recommended Charge Temperature: 15°C to 40°C Discharge Temperature: -30°C to 60°C Recommended Discharge Temperature: 15°C to 40°C Cell Diameter: 32.2 ± 0.3mm Cell Height: 70.5 ± 0.3mm Weight: 135 ± 5g These specifications are taken from the manufacturer's datasheet. 🔧 Applications Suitable for: Solar Energy Storage Systems Portable Power Stations Home Energy Storage UPS Backup Systems Electric Scooters Electric Tricycles Electric Four-Wheel Vehicles Electric Logistics Vehicles Battery Pack Manufacturing Communication Backup Power Industrial Energy Storage Robotics Projects DIY LiFePO₄ Battery Packs Marine & RV Power Systems The manufacturer lists applications including electric two-wheel vehicles, tricycles, logistics vehicles, special vehicles, portable energy storage, household energy storage, industrial energy storage, and communication backup power. 📦 Package Includes 1 × Blivex LFP32700 3.2V 6Ah LiFePO₄ Rechargeable Battery Cell ⚠️ Note Use only with a compatible LiFePO₄ charger and an appropriate Battery Management System (BMS). Do not short-circuit, crush, puncture, disassemble, or expose the battery to fire or excessive heat. Store the battery in a cool, dry place when not in use. Product appearance may vary slightly depending on the manufacturing batch. The datasheet includes additional handling, storage, and safety precautions for transportation, storage, and battery use.
Winway 18650 Lithium-Ion Rechargeable Battery 3.7V 2600mAh 9.62Wh
[Lithium Battery Cell] The Winway 18650 Lithium-Ion Rechargeable Battery is a high-performance cylindrical Li-ion cell designed to deliver reliable and long-lasting power for a wide range of electronic devices. With a nominal voltage of 3.7V, 2600mAh capacity, and 9.62Wh energy rating, it provides consistent power output for both high-drain and low-drain applications. Manufactured using premium lithium-ion cell technology, this battery offers excellent energy density, stable discharge performance, and long cycle life. Its standard 18650 form factor makes it compatible with most battery holders, chargers, and devices designed for 18650 cells. The Winway 2600mAh battery is widely used in rechargeable flashlights, emergency lights, battery packs, power banks, Bluetooth speakers, portable fans, solar lighting, DIY electronics, robotics, and various battery-operated devices. Designed for durability and dependable performance, this battery delivers excellent backup time while maintaining stable voltage throughout the discharge cycle. ⭐ Features High-quality 18650 Lithium-Ion rechargeable battery 2600mAh high-capacity cell Nominal voltage of 3.7V Energy rating of 9.62Wh Stable discharge performance High energy density Long charge and discharge cycle life Lightweight and compact cylindrical design Suitable for battery pack assembly Compatible with standard 18650 battery holders and chargers 📋 Technical Specifications Product Type: Lithium-Ion Rechargeable Battery Brand: Winway Battery Model: 18650 Nominal Voltage: 3.7V Nominal Capacity: 2600mAh Energy: 9.62Wh Battery Chemistry: Lithium-Ion (Li-ion) Cell Type: Rechargeable Form Factor: Cylindrical 18650 Diameter: Approx. 18mm Length: Approx. 65mm Weight: Approx. 45g Color: Green Rechargeable: Yes Made In: India Pack Quantity: 1 Piece 🔧 Applications Suitable for: Rechargeable Flashlights Emergency Lights Power Banks Bluetooth Speakers Portable Fans Solar Lighting Systems DIY Battery Packs Robotics Projects Arduino Projects ESP32 Projects Electronic Toys Portable Electronic Devices Medical Equipment (Compatible Models) Industrial Electronic Equipment 📦 Package Includes 1 × Winway 18650 Lithium-Ion Rechargeable Battery 3.7V 2600mAh ⚠️ Safety Instructions Use only a compatible Li-ion battery charger. Do not short-circuit, puncture, crush, or disassemble the battery. Do not expose the battery to fire, excessive heat, or water. Observe correct polarity during installation. Do not overcharge or over-discharge the battery. Store in a cool, dry place away from direct sunlight.
Digital Multimeter Test Leads with Ultra Sharp Needle Probe & Banana Plug CAT III 1000V 10A for SMD
[Hook up wire] The Digital Multimeter Test Lead Kit is a high-quality replacement probe set designed for accurate electrical measurements and electronic troubleshooting. Featuring ultra-sharp stainless steel needle probes, these leads allow easy access to miniature IC pins, SMD components, PCB tracks, LEDs, and other small electronic devices without causing damage. The probes are fitted with standard 4mm banana plug connectors, making them compatible with most digital multimeters, clamp meters, bench meters, and testing equipment from brands such as Fluke, Extech, Mastech, Uni-T, Victor, Sanwa, and many more. Constructed using high-quality PVC insulated cables and durable metal probes, the leads provide excellent flexibility, low resistance, and long service life. The CAT III safety rating ensures safe operation up to 1000V with a maximum current rating of 10A, making them suitable for both electronics and electrical testing. The built-in protective finger guards improve operator safety, while the flexible cables remain tangle-free during continuous testing. These probes are ideal for laboratory work, electronics repair, field service, educational laboratories, industrial maintenance, and DIY electronics projects. 🔹 Key Features Ultra-sharp stainless steel needle probes Standard 4mm banana plug connectors CAT III 1000V safety rating Maximum current rating: 10A Flexible PVC insulated cables Accurate low-resistance measurements Comfortable insulated probe handles Durable construction for long service life Compatible with most digital multimeters Ideal for PCB, SMD, IC and electrical testing 🔹 Technical Specifications Product Type: Digital Multimeter Test Leads Probe Type: Ultra Sharp Needle Probe Probe Colors: Red & Black Connector Type: 4mm Banana Plug Cable Material: PVC Insulated Probe Material: Stainless Steel / Metal Cable Length: Approx. 83cm Total Length: Approx. 103cm Maximum Current: 10A Maximum Voltage: 1000V Safety Rating: CAT III 1000V Measurement Type: Voltage, Current, Resistance, Continuity Compatibility: Most Digital Multimeters 🔹 Compatible With Fluke Multimeters Extech Multimeters Mastech Multimeters UNI-T Multimeters Victor Multimeters Sanwa Multimeters DT830 Series DT9205 Series Most multimeters with 4mm banana sockets 🔹 Applications Suitable for: Digital multimeters PCB testing SMD component testing IC pin testing LED testing Continuity testing Voltage measurement Current measurement Electronics repair Laboratory testing Industrial maintenance DIY electronics projects 🔹 Package Includes 1 × Red Multimeter Test Lead 1 × Black Multimeter Test Lead
Keltron 3300uF 25V Radial Electrolytic Capacitor High Performance Capacitor
[Through Hole Capacitor] The Keltron 3300uF 25V Electrolytic Capacitor is a high-performance aluminum electrolytic capacitor designed for energy storage, voltage filtering, and ripple suppression applications. It is widely used in power supply circuits, audio amplifiers, inverter systems, battery chargers, and industrial electronics. In addition, the capacitor provides excellent filtering capability by reducing voltage fluctuations and unwanted electrical noise. As a result, it helps improve circuit stability and enhances overall system performance. Because of its 3300uF high capacitance value, the capacitor is ideal for smoothing DC power rails and handling transient current demands. Furthermore, the 25V DC voltage rating makes it suitable for a variety of low-voltage electronic applications. The radial lead design allows easy PCB installation and secure mounting. Moreover, Keltron capacitors are known for their dependable quality, stable electrical characteristics, and long operational life. This capacitor is commonly used in audio amplifier power supplies, SMPS circuits, LED power supplies, inverter systems, battery chargers, and DIY electronics projects. 🔹 Key Features Genuine Keltron capacitor High capacitance 3300uF value Rated voltage of 25V DC Excellent ripple filtering performance Suitable for audio and power supply circuits Low leakage current Long operational life Radial lead through-hole design Reliable and stable performance 🔹 Technical Specifications Brand: Keltron Product Type: Electrolytic Capacitor Capacitor Type: Aluminum Electrolytic Capacitance: 3300uF Rated Voltage: 25V DC Tolerance: ±20% Mounting Type: Through-Hole (Radial Lead) Polarized: Yes Lead Type: Radial Operating Temperature: Up to 105°C (Series Dependent) Application: Filtering, Decoupling, Energy Storage 🔹 Applications This capacitor is suitable for: Audio amplifier circuits Power supply filtering SMPS circuits Inverter systems Battery chargers LED driver circuits Industrial electronics DIY electronics projects Electronic repair applications 🔹 Package Includes 1 × Keltron 3300uF 25V Radial Electrolytic Capacitor
TDT LiFePO4 LFP 4S 12.8V 25A Battery Management System
[Lithium Battery Protection Board] The TDT 4S 12.8V 25A LiFePO4 Battery Management System (BMS) is designed to protect and manage 4-cell LiFePO4 battery packs. It continuously monitors each cell’s voltage and current to ensure safe and stable operation. In addition, the BMS includes a balancing function, which helps maintain equal voltage across all cells. As a result, the battery pack delivers better performance and longer life. Moreover, the module provides multiple protection features, including overcharge, over-discharge, overcurrent, and short-circuit protection. Therefore, it prevents damage to the battery and improves reliability. Because of its compact design and efficient performance, this BMS is ideal for solar systems, backup power solutions, electric vehicles, and DIY battery packs. 🔹 Key Features Supports 4S LiFePO4 (LFP) battery packs Nominal voltage 12.8V 25A continuous discharge current Built-in cell balancing High reliability and stable operation Compact and easy to install Suitable for various battery applications 🔹 Protection Functions Overcharge protection Over-discharge protection Overcurrent protection Short-circuit protection Temperature protection (if supported) 🔹 Technical Specifications Parameter Specification Brand TDT Battery Type LiFePO4 (LFP) Battery Configuration 4S Nominal Voltage 12.8V Max Continuous Current 25A Balance Function Yes Application Lithium battery protection 🔹 Applications Solar battery systems DIY LiFePO4 battery packs Backup power systems Electric scooters and bikes Energy storage systems (ESS) 🔹 Package Includes 1 × TDT 4S 12.8V 25A LiFePO4 BMS Board
500mAh 3.7V Single Cell Rechargeable LiPo Battery (HCY-602530)
[LiPo Cell] 500mAh Rechargeable 3.7v LiPo Battery The 600mAh Rechargeable 3.7V LiPo Battery is a compact and high-performance power source designed for a wide range of DIY electronics, robotics, and wearable projects. With a nominal voltage of 3.7V and capacity of 500mAh, this 1S lithium polymer battery delivers a reliable and consistent power output for your low-to-medium power applications. Its lightweight and slim profile make it ideal for portable gadgets, RC toys, sensors, and IoT devices that require stable energy without adding bulk. One of the key advantages of this battery is its long-lasting runtime when used with efficient electronics. For example, if a device consumes an average current of just 2mA, the 600mAh capacity allows the battery to run for up to 300 hours (600mAh / 2mA) under ideal conditions. This impressive endurance highlights the battery’s suitability for long-duration tasks, especially in energy-conscious designs. With Witty Fox’s reputation for quality and durability, this LiPo battery is a dependable choice for both hobbyists and professionals looking for efficient power solutions. Features: High Capacity: 600mAh gives little devices a longer runtime. Consistent Performance: A nominal voltage of 3.7V guarantees stable output. It is rechargeable, so it can be used repeatedly for extended periods of time. Small Design: Elongated and light, ideal for projects with limited area Up to 300 hours of use at a current draw of 2mA is supported by smart power efficiency. Multiple embedded systems, microcontroller boards, and robotics kits can all be used with this versatile tool. Specifications: Specification Details Brand HCY Battery Type Lithium Polymer (LiPo) Nominal Voltage 3.7V Nominal Capacity 500mAh Battery Cell Configuration 1S (Single Cell) Rechargeable Yes Dimensions (LxWxH) 30 x 25 x 6 mm Weight 8 g(approx) Package Includes: 3.7V 500mAH (Lithium Polymer) Lipo Rechargeable Battery (Model – 602530)
Insulation Filament Tape 25mm 50 meters
[Filament Tape] 🧵 Insulation Filament Tape 25mm × 50 Meter High Strength Reinforced Adhesive Tape High Tensile Strength • Strong Adhesive • Tear Resistant • Ideal for Electrical & Industrial Applications The Insulation Filament Tape (25mm × 50 Meter) is a premium-quality, filament-reinforced adhesive tape designed for applications requiring exceptional strength, durability, and reliable adhesion. Reinforced with cross-woven fiberglass filaments, this tape offers excellent tensile strength, making it ideal for bundling, securing, reinforcing, and insulating cables, cartons, pipes, and various industrial components. Its pressure-sensitive adhesive ensures a firm bond on a wide range of surfaces while maintaining excellent resistance to tearing, stretching, and wear. The tape is widely used in electrical work, packaging, logistics, manufacturing, automotive industries, and general repair applications. With a 25mm width and 50-meter roll length, this tape provides long-lasting performance for both professional and DIY use. ⭐ Features Premium quality filament-reinforced adhesive tape Strong pressure-sensitive adhesive High tensile strength for heavy-duty applications Cross-woven fiberglass reinforcement for extra durability Excellent tear and stretch resistance Reliable adhesion on multiple surfaces Suitable for electrical insulation and cable bundling Easy to apply and remove without splitting Ideal for industrial, commercial, and home use Long-lasting adhesive performance 📋 Technical Specifications Product Type: Filament Reinforced Adhesive Tape Tape Width: 25mm Tape Length: 50 Meter Tape Type: Cross Filament Reinforced Backing Material: Reinforced Fiberglass Filament Adhesive Type: Pressure Sensitive Color: Transparent / Clear (May vary by batch) Tear Resistance: High Tensile Strength: High Application Temperature: Suitable for general industrial use Application: Insulation, Bundling, Packaging, Reinforcement 🔧 Applications Suitable for: Electrical Insulation Cable Bundling Wire Harnessing Carton Sealing Heavy-Duty Packaging Shipping & Logistics Pipe Wrapping Industrial Assembly Appliance Manufacturing Automotive Wiring Warehouse Packaging Repair & Maintenance DIY Projects General Industrial Use 📦 Package Includes 1 × Insulation Filament Tape (25mm × 50 Meter) ⚠️ Note Image shown is for reference only. Product color or branding may vary depending on the manufacturing batch. Ensure the application surface is clean, dry, and free from dust or oil for maximum adhesion.
A Grade 3.2V 15Ah 3C 48Wh 3000 Cycles Prismatic Lithium Ion Lipo4 33140 Battery
[LiFePO4 Battery Cell] 32140 15Ah Battery Specification Overview The 15Ah 32140 is a lithium iron phosphate (LiFePO4/LFP) battery in the 32140 cylindrical format (32mm diameter x 140mm height). It's designed for high-capacity, high-cycle-life applications, particularly in energy storage and electric vehicles. Here's a detailed breakdown: Key Specifications • Model: JSK-32140 (or similar variant) • Chemistry: LiFePO4 (LFP) • Nominal Capacity: 15Ah (15000mAh) • Nominal Voltage: 3.2V • Charge Voltage: 3.65V (max) • Discharge Cut-off: 2.5V • Max Continuous Discharge: 30A (2C) • Peak Discharge (pulse): 60A (4C, ≤3 sec) • Standard Charge Current: 7.5A (0.5C) • Fast Charge Possible: Up to 15A (1C) • Cycle Life: 2000+ cycles (to 80% capacity) • Dimensions: 32mm × 140mm • Weight: ~450g (varies by manufacturer) • Operating Temp: ◦ Charge: 0°C to 45°C ◦ Discharge: -20°C to 60°C Key Features ✅ High Capacity – 15Ah is substantial for a single cell, ideal for energy storage. ✅ Long Cycle Life – 2000+ cycles (far exceeding standard Li-ion/NMC batteries). ✅ Safety – LiFePO4 chemistry is non-flammable and stable under abuse. ✅ High Discharge Capability – 30A continuous (suitable for power tools, small EVs). Common Applications • Solar energy storage systems (home/grid storage) • Electric bikes/scooters (as part of a battery pack) • Power tools (replacing lead-acid or NMC packs) • Marine/RV power systems • Backup power stations Safety & Handling No protection circuit needed (LiFePO4 is inherently safer than NMC/Li-ion). Use a LiFePO4-compatible charger (3.65V max, not 4.2V Li-ion chargers). Avoid short-circuiting – Can still deliver dangerous current. Storage: Store at ~50% charge in a cool, dry place. WARNING: Do NOT expose the battery to water Do NOT expose the battery to fire & high temperature Do NOT short circuit, crush or disassemble Only use LiFePO4 charger Storage at 50% capacity, recharge every 3 months. The storage area should be clean, cool, dry and ventilated. Grade A 100% brand new
GL-12 840 Points Solderless Breadboard
[Breadboard and Zero PCBs] A GL-12 840 Points Solderless Breadboard is an invaluable tool for experimenting with circuit designs whether in the R&D or university lab. A breadboard is used to make up temporary circuits for testing or to try out an idea. No soldering is required so it is easy to change connections and replace components. Parts will not be damaged so they will be available for re-use afterward. 840 Tie points – 128 Groups of 5 connected terminals, 8 Bus of 25 connected terminals Reusable for fast build a prototype of an electronic circuit – will accept transistors, diodes, LEDs, resistors, capacitors and virtually all types of components – No soldering required – Can modify or revise the circuits easily Fit for jumper wire of 0.8mm diameter – Standard 2.54mm hole spacing Adhesive sheet on the back side of the board – Multiple breadboards can be spliced together too. Features: 100% brand new and high quality Practical and useful Solderless breadboard with 840 points Completely reusable and have a self-adhesive back Easy component placement Package Includes: 1 x GL-12 840 Points Solderless Breadboard
Digital Multimeter Test Leads with Ultra Sharp Needle Probe & Banana Plug CAT III 1000V 10A
[Hook up wire] The Digital Multimeter Test Lead Kit is a high-quality replacement probe set designed for accurate electrical measurements and electronic troubleshooting. Featuring ultra-sharp stainless steel needle probes, these leads allow easy access to miniature IC pins, SMD components, PCB tracks, LEDs, and other small electronic devices without causing damage. The probes are fitted with standard 4mm banana plug connectors, making them compatible with most digital multimeters, clamp meters, bench meters, and testing equipment from brands such as Fluke, Extech, Mastech, Uni-T, Victor, Sanwa, and many more. Constructed using high-quality PVC insulated cables and durable metal probes, the leads provide excellent flexibility, low resistance, and long service life. The CAT III safety rating ensures safe operation up to 1000V with a maximum current rating of 10A, making them suitable for both electronics and electrical testing. The built-in protective finger guards improve operator safety, while the flexible cables remain tangle-free during continuous testing. These probes are ideal for laboratory work, electronics repair, field service, educational laboratories, industrial maintenance, and DIY electronics projects. 🔹 Key Features Ultra-sharp stainless steel needle probes Standard 4mm banana plug connectors CAT III 1000V safety rating Maximum current rating: 10A Flexible PVC insulated cables Accurate low-resistance measurements Comfortable insulated probe handles Durable construction for long service life Compatible with most digital multimeters Ideal for PCB, SMD, IC and electrical testing 🔹 Technical Specifications Product Type: Digital Multimeter Test Leads Probe Type: Ultra Sharp Needle Probe Probe Colors: Red & Black Connector Type: 4mm Banana Plug Cable Material: PVC Insulated Probe Material: Stainless Steel / Metal Cable Length: Approx. 83cm Total Length: Approx. 103cm Maximum Current: 10A Maximum Voltage: 1000V Safety Rating: CAT III 1000V Measurement Type: Voltage, Current, Resistance, Continuity Compatibility: Most Digital Multimeters 🔹 Compatible With Fluke Multimeters Extech Multimeters Mastech Multimeters UNI-T Multimeters Victor Multimeters Sanwa Multimeters DT830 Series DT9205 Series Most multimeters with 4mm banana sockets 🔹 Applications Suitable for: Digital multimeters PCB testing SMD component testing IC pin testing LED testing Continuity testing Voltage measurement Current measurement Electronics repair Laboratory testing Industrial maintenance DIY electronics projects 🔹 Package Includes 1 × Red Multimeter Test Lead 1 × Black Multimeter Test Lead
Kapton 25mm x 33m High Temperature Resistant Tape
[Kapton Tapes] Kapton tape is a polyimide film first developed by DuPont in the 1960s. It remains stable at an extremely wide range of temperatures from -269˚C to 260˚C and has been an industry-standard due to its excellent electrical, thermal, chemical and mechanical properties. This enables the film to withstand extreme temperatures, vibration, and other demanding environments. This Kapton 50mm x 33m High-Temperature Resistant Tape for 3D Printers is a polyester film tape with a high-temperature resistant adhesive. Primarily used to hold transfer sheets in place while sublimating onto a variety of items and hold the polymer plate on the heating platen in the hot foil stamping. Excellent heat & solvent resistance. Minimal shrinkage after baking and clean removal. Due to Kapton tape’s large range of temperature stability and electrical isolation ability, it is used during the manufacturing and final assembly of electronic components. It acts as a protective layer that isolates and prevents the electrostatic discharge of sensitive components, also protecting and restraining components during high temp applications and reflow soldering procedures. ABS and Kapton adhere extremely well to one another, making Kapton tape a perfect 3D printing bed surface layer. It is usually applied to a glass or aluminum bed surface, where extruded ABS filament adheres to the surface. Specification and Features: Material: Polyimide Spindle Type: Roll Tape Length: 33m TapeWidth: 25mm Colour: Metallic Brown Temperature Range: 200ºC High-quality product from a well-known brand Package Includes: 1 x Kapton 25mm x 33m High-Temperature Resistant Tape for 3D Printers Note: Product Images are shown for illustrative purposes only and may differ from the actual product
JIABAIDA (JBD) NMC 10S 36V 20A Battery Management System
[Lithium Battery Protection Board] The JIABAIDA (JBD) 10S 37V 20A Battery Management System (BMS) is an advanced electronic module designed to protect and manage 10S lithium-ion battery packs using NMC chemistry. It ensures safe operation by continuously monitoring voltage, current, and temperature. In addition, the BMS includes cell balancing functionality, which helps maintain equal voltage across all cells. As a result, battery performance improves and lifespan increases. Moreover, the system features multiple protection mechanisms, including overcharge, over-discharge, overcurrent, and short-circuit protection. Therefore, it helps prevent battery damage and ensures reliable operation. Because of its compact design and accurate monitoring, this BMS is suitable for electric bikes, battery packs, solar storage systems, and portable power applications. 🔹 Key Features Supports 10S Li-ion (NMC) battery packs 20A continuous discharge current Built-in cell balancing function High-accuracy voltage monitoring Temperature monitoring support Multiple protection systems Stable and reliable performance Suitable for DIY and industrial use 🔹 Protection Functions Overcharge protection Over-discharge protection Overcurrent protection Short-circuit protection Temperature protection 🔹 Technical Specifications Parameter Specification Brand JIABAIDA (JBD) Battery Type Li-ion (NMC) Battery Configuration 10S Nominal Voltage 37V Max Continuous Current 20A Cell Voltage Range 0V – 4.2V Temperature Range -40°C to 85°C Voltage Balance Accuracy ±5mV Current Accuracy ±50mA 🔹 Applications Electric bikes (E-bike) DIY battery packs Solar energy storage systems Portable power systems Electric scooters Backup power solutions 🔹 Package Includes 1 × JBD 10S 37V 20A Battery Management System (BMS)
IC 7805 TO-220 Linear Voltage Regulator LM7805 Made ST
[Voltage Regulator IC] LM7805 5V Linear Voltage Regulator IC 7805 The L78M05CV is a fixed output, three-terminal precision positive voltage regulator in 3 pins TO-220 package. This regulator can provide local on-card regulation by eliminating distribution problems associated with single-point regulation. The L78M05CV fixed voltage regulator is designed with thermal overload protection that shuts down the circuit when subjected to an excessive power overload condition, internal short circuit protection that limits maximum current the circuit will pass and output transistor safe area compensation that reduces the output short circuit as the voltage across the pass transistor is increased. If adequate heat sinking is provided then this positive voltage regulator can deliver over 0.5A output current. Features: Fixed output voltage is 5V Output current is 0.5A Dropout voltage is 2V Maximum DC input voltage is 35V Output transition SOA protection Output voltage tolerance is 4% Operating temperature range 0°C to 125°C Applications: Power Management. Note: Image may vary from actual product in terms of Manufacturer/Brand name according to availability.
Multitec Stainless Steel Wire Stripper & Cutter (150B-SS)
[Cutter] Multitech MT-150B-SS Wire Stripper and Cutter The Multitech MT-150B-SS Wire Stripper and Cutter is a high-quality tool designed for professionals and DIY enthusiasts. Made from durable stainless steel, this versatile tool efficiently strips and cuts various wire types, making it ideal for electrical work. This Multitec MT-150B-SS Stripper is a new heavy duty handles with finger holding ring. Multitec MT-150B-SS Stripper is a High-grade alloy steel stripper/cutter ideal for professionals. The tool is suitable for the cutting. This cutter is broadly used for cutting fiber cable perpendicular to the cable axis. Suitable for electrical work by electricians and other tradesmen primarily for gripping, twisting, bending and cutting wire and cable. Technical Specifications Brand: Multitech Model: MT-150B-SS Material: Stainless Steel Color: Steel Grey with Green Handles Finish: Satin finish, rust-resistant Weight: Approximately 82 grams Features Dual Functionality: Combines wire stripping and cutting capabilities in one tool Ergonomic Design: Comfortable grip handles for ease of use during prolonged tasks High Strength: Built with high tensile strength to withstand heavy-duty use Rust Resistance: Made from stainless steel to prevent rust and corrosion Precision Cutting: Designed for clean cuts and accurate wire stripping Applications Ideal for electricians, technicians, and hobbyists Suitable for various electrical tasks including wiring, looping, and installation Effective for cutting fiber cables and other types of wires Specification: Brand Multitec Color STEEL GREY, Green Material Stainless-Steel Weight 50g Package Includes: 1 x Stainless Steel Wire Stripper & Cutter 150B-SS
0.28 inch 3.5-30V Two Wire DC Voltmeter Yellow
[Ammeter and Voltmeter] This is tiny and compact digital voltmeter with red LED Display. 0.28inch 3.5-30V Two Wire DC Voltmeter Yellow Panel requires only a few minutes of configuration and is as simple as directly connecting wires to the source you want to measure and seeing the LED blink!!!! The red wire is to connect to the positive pole, the black wire is to connect to the negative pole. No need to worry even if there is any connection mismatch of the wires, the electric circuit wont be a boom because it features reverse polarity protection. This voltmeter doesn't need external drive working power, it can work with measuring voltage, the working voltages range is 3.5-30V. To reach the best measurement accuracy, this voltmeter will automatically move the decimal points position according to the different measuring voltage. When it measures the voltage below 10V, it will display two places after the decimal point. When it measures the voltage above 10V, it will display one place after the decimal point. This voltmeter can be used to measure the storage battery's voltage in motorcycles and cars and also can grasp the storage batterys status. It also can be used to measure other voltage. 30V is the voltmeters maximum operating limited voltage, please leave enough margin when working, to avoid voltmeters permanent damage because of an electrical spark, power supply ripple, or other too high abrupt change of voltage. Very bight and decent LED Display is ready to measure the dc voltages in the range of 3.5V to 30V. Connections : Red Wire: source +ve terminal. Black Wire: Source -ve terminal. Note: The display weight and Dimensions may have2% error. Features : Very small and lightweight voltmeter module. Very handy and easy to use. Green LED display. Dont need the external power supply because it is a self-powered version of this display. Best operates in the working voltage range of 5V to 24V 100% Brand new and high quality. 📑 Additional Information Accuracy: 0.1 VColor: YellowWires: 2 (Two-Wire Design)Display ON Voltage: 2.5 VOperating Voltage: 3.6 V ~ 28 V DCCurrent Consumption: 15 mARefresh Speed: 200 ms (one update)Minimum Input Voltage: 3.6 VMaximum Input Voltage: 28 VOperating Temperature: -10°C to 60°CMounting Hole Distance: 3 cmHeight: 0.72 cmLength: 1.3 cmWidth: 3 cmWeight: 3 g Package Includes : 1 x 0.72 cm (0.28 inch) 3.5-30V Two Wire DC Voltmeter Yellow * Product Images are shown for illustrative purposes only and may differ from actual product.
0.28 inch 3.5-30V Two Wire DC Voltmeter Green
[Ammeter and Voltmeter] This is tiny and compact digital voltmeter with red LED Display. 0.28inch 3.5-30V Two Wire DC Voltmeter Green Panel requires only a few minutes of configuration and is as simple as directly connecting wires to the source you want to measure and seeing the LED blink!!!! The red wire is to connect to the positive pole, the black wire is to connect to the negative pole. No need to worry even if there is any connection mismatch of the wires, the electric circuit wont be a boom because it features reverse polarity protection. This voltmeter doesn't need external drive working power, it can work with measuring voltage, the working voltages range is 3.5-30V. To reach the best measurement accuracy, this voltmeter will automatically move the decimal points position according to the different measuring voltage. When it measures the voltage below 10V, it will display two places after the decimal point. When it measures the voltage above 10V, it will display one place after the decimal point. This voltmeter can be used to measure the storage battery's voltage in motorcycles and cars and also can grasp the storage batterys status. It also can be used to measure other voltage. 30V is the voltmeters maximum operating limited voltage, please leave enough margin when working, to avoid voltmeters permanent damage because of an electrical spark, power supply ripple, or other too high abrupt change of voltage. Very bight and decent LED Display is ready to measure the dc voltages in the range of 3.5V to 30V. Connections : Red Wire: source +ve terminal. Black Wire: Source -ve terminal. Note: The display weight and Dimensions may have2% error. Features : Very small and lightweight voltmeter module. Very handy and easy to use. Green LED display. Dont need the external power supply because it is a self-powered version of this display. Best operates in the working voltage range of 5V to 24V 100% Brand new and high quality. Additional information Accuracy 0.1 V Color Green Wires 2 Display ON Voltage (V) 2.5 Operating Voltage (VDC) 3.6 ~ 28 Current Consumption (mA) 15 Refresh Speed (ms) 200 (one time) Minimum Input (V) 3.6 Highest Input (V) 28 Operating Temperature (C). -10 to 60 Holes for Mounting 3 cm Height (cm) 0.72 cm Length (cm) 1.3 cm Width (cm) 3 cm Weight (gm) 3 gm Package Includes : 1 x 0.72 cm (0.28 inch) 3.5-30V Two Wire DC Voltmeter Green * Product Images are shown for illustrative purposes only and may differ from actual product.
0.28 inch 3.5-30V Two Wire DC Voltmeter Blue
[Ammeter and Voltmeter] This is tiny and compact digital voltmeter with red LED Display. 0.28inch 3.5-30V Two Wire DC Voltmeter Blue Panel requires only a few minutes of configuration and is as simple as directly connecting wires to the source you want to measure and seeing the LED blink!!!! The red wire is to connect to the positive pole, the black wire is to connect to the negative pole. No need to worry even if there is any connection mismatch of the wires, the electric circuit wont be a boom because it features reverse polarity protection. This voltmeter doesn't need external drive working power, it can work with measuring voltage, the working voltages range is 3.5-30V. To reach the best measurement accuracy, this voltmeter will automatically move the decimal points position according to the different measuring voltage. When it measures the voltage below 10V, it will display two places after the decimal point. When it measures the voltage above 10V, it will display one place after the decimal point. This voltmeter can be used to measure the storage battery's voltage in motorcycles and cars and also can grasp the storage batterys status. It also can be used to measure other voltage. 30V is the voltmeters maximum operating limited voltage, please leave enough margin when working, to avoid voltmeters permanent damage because of an electrical spark, power supply ripple, or other too high abrupt change of voltage. Very bight and decent LED Display is ready to measure the dc voltages in the range of 3.5V to 30V. Connections : Red Wire: source +ve terminal. Black Wire: Source -ve terminal. Note: The display weight and Dimensions may have2% error. Features : Very small and lightweight voltmeter module. Very handy and easy to use. Blue LED display. Dont need the external power supply because it is a self-powered version of this display. Best operates in the working voltage range of 5V to 24V 100% Brand new and high quality. Additional information Accuracy 0.1 V Color Blue Wires 2 Display ON Voltage (V) 2.5 Operating Voltage (VDC) 3.6 ~ 28 Current Consumption (mA) 15 Refresh Speed (ms) 200 (one time) Minimum Input (V) 3.6 Highest Input (V) 28 Operating Temperature (C). -10 to 60 Holes for Mounting 3 cm Height (cm) 0.72 cm Length (cm) 1.3 cm Width (cm) 3 cm Weight (gm) 3 gm Package Includes : 1 x 0.72 cm (0.28 inch) 3.5-30V Two Wire DC Voltmeter Blue * Product Images are shown for illustrative purposes only and may differ from actual product.
100K Rotary Potentiometer Round Shaft Elcon
[Potentiometer] 100KΩ Rotary Potentiometer Round Shaft Elcon The 100KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin linear rotary potentiometer designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. Its linear resistance characteristics make it suitable for applications such as LED brightness control, fan speed control, motor control, power supply adjustment, and general-purpose voltage control. ⭐ Key Features 100KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft 13mm shaft length Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Ideal for voltage and resistance adjustment Suitable for DIY and electronic projects Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 100KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 13mm Body Diameter / Width: 16mm Total Height: Approx. 28mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Audio & Electronic Circuits Arduino Projects DIY Electronics Projects Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 100KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 100KΩ value, tolerance, dimensions, and shaft length should be verified against the actual product batch before installation.
10K Rotary Potentiometer Round Shaft 3Pin Elcon
[Potentiometer] 10KΩ Rotary Potentiometer Round Shaft Elcon The 10KΩ Rotary Potentiometer Round Shaft Elcon is a reliable 3-pin variable resistor designed for adjusting electrical parameters such as voltage, current, brightness, motor speed, and other control functions in electronic circuits. By rotating the shaft, the resistance can be smoothly adjusted across its available range, making it suitable for a wide variety of DIY and electronic applications. With its compact 16mm body, 6mm round shaft, and through-hole mounting design, this potentiometer is easy to install on electronic PCBs and control panels. The linear resistance characteristics make it particularly suitable for applications such as LED brightness control, fan speed control, motor control, and general-purpose voltage adjustment. ⭐ Key Features 10KΩ resistance value 3-pin rotary potentiometer Linear potentiometer Smooth rotary adjustment 6mm round shaft Compact 16mm body diameter Through-hole mounting Suitable for PCB and electronic circuits Useful for voltage and current adjustment Suitable for LED, fan and motor control applications Elcon brand 📋 Technical Specifications Product Type: Rotary Potentiometer Brand: Elcon Resistance Value: 10KΩ Configuration: 3 Pin / Single Gang Tolerance: ±20% Shaft Type: Round Shaft Shaft Diameter: 6mm Shaft Length: 13mm Body Diameter / Width: 16mm Total Height: 30mm Mounting Type: Through Hole Operating Temperature: -40°C to +80°C Weight: Approx. 8g 🔧 Applications LED Brightness Control Fan Speed Control Motor Speed Control Voltage Adjustment Current Adjustment Power Supply Circuits Arduino Projects DIY Electronics Projects Audio & Electronic Circuits Electronic Prototyping 🛠️ How It Works A potentiometer is a variable resistor with three terminals. The two outer terminals are connected to the resistive track, while the center terminal acts as the wiper. Rotating the shaft changes the wiper position and therefore changes the resistance or output voltage in the circuit. 📦 Package Includes 1 × 10KΩ Rotary Potentiometer Round Shaft Elcon ⚠️ Note Product images are shown for illustrative purposes only and may differ slightly from the actual product. The 10KΩ value and ±20% tolerance are based on the supplied product specifications.
Soldering and Desoldering Flux Paste
[Soldering Paste, Soldering Paste] 15g Soldering Flux Paste for PCB, BGA & SMD Rework The 15g Soldering Flux Paste is a reliable soldering and desoldering aid designed to improve solder flow and help achieve clean, strong, and reliable solder joints. It assists molten solder in flowing smoothly across electronic components and PCB pads, making soldering and rework easier. This flux is suitable for PCB soldering, BGA rework, PGA components, SMD components, motherboard repair, and general electronics servicing. Its low-residue formulation helps keep the work area cleaner after soldering. ⭐ Key Features Helps improve the flow of molten solder Helps achieve smoother and more reliable solder joints Low-residue formulation Stable performance Suitable for electronics repair and rework Easy to apply during soldering Suitable for PCB, BGA, PGA and SMD work Ideal for professional technicians and DIY electronics enthusiasts 📋 Technical Specifications Product Type: Soldering & Desoldering Flux Paste Brand: Shakti / Usha Weight: 15g Application: Soldering & Electronics Rework Suitable For: PCB, BGA, PGA, SMD Form: Flux Paste 🔧 Applications PCB Soldering BGA Rework PGA Component Rework SMD Soldering Motherboard Repair Electronic Component Repair Desoldering & Rework DIY Electronics Projects General Electronics Servicing 📦 Package Includes 1 × 15g Soldering & Desoldering Flux Paste ⚠️ Note Product images are for illustration purposes only. Packaging, color, and appearance may vary depending on the available batch or brand variant.
0.28 inch 3.5-30V Two Wire DC Voltmeter Red
[Ammeter and Voltmeter] This is tiny and compact digital voltmeter with red LED Display. 0.28inch 3.5-30V Two Wire DC Voltmeter Red Panel requires only a few minutes of configuration and is as simple as directly connecting wires to the source you want to measure and seeing the LED blink!!!! The red wire is to connect to the positive pole, the black wire is to connect to the negative pole. No need to worry even if there is any connection mismatch of the wires, the electric circuit wont be a boom because it features reverse polarity protection. This voltmeter doesn't need external drive working power, it can work with measuring voltage, the working voltages range is 3.5-30V. To reach the best measurement accuracy, this voltmeter will automatically move the decimal points position according to the different measuring voltage. When it measures the voltage below 10V, it will display two places after the decimal point. When it measures the voltage above 10V, it will display one place after the decimal point. This voltmeter can be used to measure the storage battery's voltage in motorcycles and cars and also can grasp the storage batterys status. It also can be used to measure other voltage. 30V is the voltmeters maximum operating limited voltage, please leave enough margin when working, to avoid voltmeters permanent damage because of an electrical spark, power supply ripple, or other too high abrupt change of voltage. Very bight and decent LED Display is ready to measure the dc voltages in the range of 3.5V to 30V. Connections : Red Wire: source +ve terminal. Black Wire: Source -ve terminal. Note: The display weight and Dimensions may have2% error. Features : Very small and lightweight voltmeter module. Very handy and easy to use. Red LED display. Dont need the external power supply because it is a self-powered version of this display. Best operates in the working voltage range of 5V to 24V 100% Brand new and high quality. Additional information Accuracy 0.1 V Color Red Wires 2 Display ON Voltage (V) 2.5 Operating Voltage (VDC) 3.6 ~ 28 Current Consumption (mA) 15 Refresh Speed (ms) 200 (one time) Minimum Input (V) 3.6 Highest Input (V) 28 Operating Temperature (C). -10 to 60 Holes for Mounting 3 cm Height (cm) 0.72 cm Length (cm) 1.3 cm Width (cm) 3 cm Weight (gm) 3 gm Package Includes : 1 x 0.72 cm (0.28 inch) 3.5-30V Two Wire DC Voltmeter Red * Product Images are shown for illustrative purposes only and may differ from actual product.