All products · 9 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
Only 2 leftTriple Axis Magnetometer
3-axis magnetoresistive sensor for compass/orientation.
Triple Axis Accelerometer
3-axis accelerometer for tilt/orientation sensing.
ADXL345 Accelerometer
ADXL345 3-axis accelerometer. Interface: I2C/SPI. Supply: 2.0–3.6V (modules often 3.3–5V). Ranges: ±2/±4/±8/±16g.
Multitec Stainless Steel Wire Stripper & Cutter (150B-SS)
[Cutter] Multitech MT-150B-SS Wire Stripper and Cutter The Multitech MT-150B-SS Wire Stripper and Cutter is a high-quality tool designed for professionals and DIY enthusiasts. Made from durable stainless steel, this versatile tool efficiently strips and cuts various wire types, making it ideal for electrical work. This Multitec MT-150B-SS Stripper is a new heavy duty handles with finger holding ring. Multitec MT-150B-SS Stripper is a High-grade alloy steel stripper/cutter ideal for professionals. The tool is suitable for the cutting. This cutter is broadly used for cutting fiber cable perpendicular to the cable axis. Suitable for electrical work by electricians and other tradesmen primarily for gripping, twisting, bending and cutting wire and cable. Technical Specifications Brand: Multitech Model: MT-150B-SS Material: Stainless Steel Color: Steel Grey with Green Handles Finish: Satin finish, rust-resistant Weight: Approximately 82 grams Features Dual Functionality: Combines wire stripping and cutting capabilities in one tool Ergonomic Design: Comfortable grip handles for ease of use during prolonged tasks High Strength: Built with high tensile strength to withstand heavy-duty use Rust Resistance: Made from stainless steel to prevent rust and corrosion Precision Cutting: Designed for clean cuts and accurate wire stripping Applications Ideal for electricians, technicians, and hobbyists Suitable for various electrical tasks including wiring, looping, and installation Effective for cutting fiber cables and other types of wires Specification: Brand Multitec Color STEEL GREY, Green Material Stainless-Steel Weight 50g Package Includes: 1 x Stainless Steel Wire Stripper & Cutter 150B-SS
Out of stockAD20P-1230C Ultra-Quiet DC 12V 3M 240L/H Brushless Submersible Water Pump with Cable 45cm
[DC Water Pump] A brushless dc pump is a 12v or 24v mini bldc motor drive dc water pump that uses magnetic force to rotate its impeller to pressurize and transport water for fluid lifting, booster, and circulation system. It is a kind of typical mechatronic product. You might be searching for a pump that operates on 12 V and gives an output of above 240L/H then this could be the best choice for your project. This Ultra-Quiet DC 12V 3M 240L/H Brushless Submersible Water Pump is a low-cost, small size Submersible Pump. It can take up to 240 liters per hour with a very low current consumption from 300mA. Just connect the tube pipe to the motor outlet, submerge it in water, and power it. The black color pump comes with a heavy-duty cable and a 5mm DC female jack at the end to connect directly to the 12V power supply. It is widely used in prototype projects as well as for decoration purposes. Features: Brand new and high quality. Brushless, permanent magnetic rotor. Super long working life(more than 30000 hours). Adopt high performance ceramic shaft. The axis is enclosed with static sealing, not dynamic, which can avoid leaking problems. Amphibious design. Submersible installation and entirely waterproof. low consumption Packages Includes: 1 x Brushless Submersible Water Pump
Out of stockADXL345 Tripple Axis Accelerometer Board
[Accelerometer and Gyro Sensor] ADXL345 Tripple Axis Accelerometer Board is a small, thin, low-power, 3-axis accelerometer with a high resolution (13-bit) measurement at up to ±16g. Digital output data is format as a 16-bit two’s complement and is accessible through either an SPI (3- or 4-wire) or I2C digital interface. The ADXL345 Tripple Axis Accelerometer Board is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°. Several special sensing functions are provided. Activity and inactivity sensing detect the presence or lack of motion and if the acceleration on any axis exceeds a user-set level. Tap sensing detects single and double taps. Free-fall sensing detects if the device is falling. These functions can be mapped to one of two interrupt output pins. An integrated, patent-pending 32-level first-in, first-out (FIFO) buffer can be used to store data to minimize host processor intervention. Low power modes enable intelligent motion-based power management with threshold sensing and active acceleration measurement at extremely low power dissipation. Applications : Pointing devices. Handsets. Medical Instrumentation. Gaming. Industrial instrumentation. Personal navigation devices. Hard disk drive (HDD) protection. Fitness equipment. defense and aerospace. Note: This package does not include the Arduino board, you have to buy it separately. Features : Ultra-Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V. Free-Fall Detection. Tap/Double Tap Detection. Flexible interrupt modes mappable to either interrupt pin Measurement ranges selectable via serial command Bandwidth selectable via serial command Wide temperature range (−40°C to +85°C). 10,000 g shock survival. Support 5V/3.3V voltage input, onboard RT9161 power chip, lower pressure drop faster than 1117, the faster load speed of response, very suitable for high-noise power supply environment. User-selectable resolution Fixed 10-bit resolution. Full resolution, where resolution increases with G range, up to 13-bit resolution at ±16 g (maintaining 4 mg/LSB scale factor in all G ranges). Package Includes : 1 x ADXL345 Tripple Axis Accelerometer Board.
MPU-6050 3-Axis Accelerometer and Gyro Sensor
[Accelerometer and Gyro Sensor] The MPU-6050 3-Axis Accelerometer and Gyro Sensor module use MPU-6050 which is a little piece of motion processing tech. The MPU6050 datasheet is available in the attachment section to get this visit. There are different types of magnetometer are available the basic differences between MPU6000, MPU6050 and MPU6500 is: MPU6000 MPU6050 MPU6500 1. A sampling rate of 8 kHz. 1. A sampling rate of 8 kHz. 1. A sampling rate of 32 kHz. 2. Supports SPI and I2C interface. But I2C is too slow to handle 8 kHz gyro update. 2. Supports I2C interface communication protocol. 2. Supports both I2C and SPI interface. 3. Vibration Sensitivity is better than MPU6500. 3. Vibration Sensitivity is better than MPU6500 but the speed of operation is less than MPU6000. 3. It is more susceptible to vibrations, so the need for some vibration isolation methods. It is faster than both MPU. The MPU6050 devices combine a 3-axis gyroscope and a 3-axis accelerometer on the same silicon together with an onboard Digital Motion Processor (DMP) capable of processing complex 9-axis MotionFusion algorithms. To get more insights about specifications visit the MPU6050 datasheet. If you want to Explore more about Accelerometer Then click on, Accelerometer and Gyroscope Features : Chip built-in 16bit AD converter, 16-bit data output. I2C Digital-output of 6 or 9-axis MotionFusion data in rotation matrix, quaternion, Euler Angle, or raw data format. Selectable Solder Jumpers on CLK, FSYNC, and AD0. Digital Motion Processing™ (DMP™) engine offloads complex MotionFusion, sensor timing synchronization, and gesture detection. Embedded algorithms for run-time bias and compass calibration. No user intervention is required. Digital-output temperature sensor. Package Includes: 1 x MPU-6050 Gyro Sensor 2 + Accelerometer. 1 x 1*8 Burg connector Pins(Right angle). 1x 1*8 Burg connector Pins(Straight).
Out of stockPS2 Joystick Module Breakout Sensor
[Breakout Board] Dual Axis XY Joystick Module This is JoyStick Module PS2 Breakout Sensor very similar to the ‘analog’ joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers – one for each axis. Pots are ~10k each. This joystick also has a select button that is actuated when the joystick is press down. With the help of this Joystick Module, you can measure position coordinates on the X and Y axis by moving the “hat”. It also contains a switch that is press-able by pushing the “hat”.It also contains a switch that is press-able by pushing the “hat” down. Similar to the XBOX controller. The X and Y axes are two 10k potentiometers which control 2D movement by generating analog signals. When the module is in working mode, it will output two analog values, representing two directions. This module uses the 5V power supply, and value, when reading through analog input, would be about 2.5V, a value will increase with joystick movement and will go up till maximum 5V; the value will decrease when the joystick is moved in other direction till 0V. Applications: 1. As square wave signal generator which generates a square wave signal 2. To provide a signal to the stepping motor driver 3. Adjustable pulse generation for chip use 4. Produce variable pulse signal, the control-related circuit (PWM dimming, speed) Module Description: Frequency is divided into three ranges: 1. XXX (no decimal point): the smallest unit is 1Hz, the range 1Hz-999Hz 2. XX.X (decimal point in ten): The minimum unit is 0.1Khz; the range of 0.1KHz-99.9KHz 3. X.X.X.(there is three decimal point): the smallest unit is 1Khz; the range 1KHz-150KHz Frequency Display Example: 1. ”100″ indicates that the PWM output pulse of 100Hz 2. ”54.1″ indicates that the PWM output pulse of 54.1KHz 3. ”1.2.4.” Indicates that the PWM pulse output 124KHz 4. Duty Cycle in the range:0 to 100 5. Three frequencies duty cycle is the same, all the parameters are non-volatile Features: 2.54mm pin interface leads Long service life and stable performance Standard interface and electronic building blocks Widely use in Arduino DIY projects Cross rocker as a two-way 10K resistor, with the rocker in a different direction.
Out of stockQuadcopter Drone Frame F450
[Drone Frame, Uncategorized] F 450 Quadcopter 4-Axis Strong Frame (Multicolour) Width: 450mm Height: 55mm Weight: 295g (without electronics) Material: Glass Fiber + Polyamide-Nylon Motor Mount Bolt Holes: 16/19mm Built from high-quality glass fibre and ultra-durable polyamide nylon. Arms are reinforced and much stronger to prevent and reduce breakage at hard landings. Integrated PCB connections for direct soldering your ESCs. Colored arms for orientation to keep you flying in the right direction. Large mounting tabs on main frame bottom plate for easy camera or other accessories mounting. Pre-threaded brass sleeves for all of the frame bolts. Easy assembly. Package includes : 1 x Top and Bottom with Integrated PCB. 2 x F450 arms Red 2 x F450 arms White 1 x Accessories set. This Q450 Quadcopter Frame is made from Glass Fiber which makes it tough and durable. They have the arms of ultra-durable Polyamide-Nylon which are the stronger molded arms having a very good thickness so no more arm breakage at the motor mounts on a hard landing. The arms have support ridges on them, which improves stability and provides faster forward flight.