All products · 3 of 1440
Electronics, sensors, robotics kits, PC components, peripherals — everything Unik Systems carries, in one place.
110 × 69mm 5V 180mA Mini Solar Panel Cell Module
[Solar Panel] ☀️ 110 × 69mm 5V 180mA Mini Solar Panel Cell Module (0.9W) 5V Output • 180mA Current • 0.9W Power • Polycrystalline Solar Cell • Compact & Lightweight The 110 × 69mm 5V 180mA Mini Solar Panel Cell Module is a compact and efficient photovoltaic module designed to convert sunlight into clean, renewable electrical energy. Delivering a stable 5V output with a maximum current of 180mA, this solar panel is ideal for powering low-power electronic devices, DIY solar projects, battery charging applications, and educational experiments. Built using high-quality polycrystalline silicon solar cells, the module offers efficient energy conversion while maintaining reliable performance under sunlight. Its lightweight construction and compact dimensions make it easy to integrate into portable devices, robotics projects, solar-powered gadgets, and outdoor applications. Designed for durability, the panel features a weather-resistant construction suitable for outdoor use. With pre-drilled mounting holes, installation is quick and convenient for a wide range of renewable energy projects. ⭐ Features High-efficiency polycrystalline solar panel Stable 5V DC output Maximum output current of 180mA Maximum power output of 0.9W Compact size for portable projects Lightweight and easy to install Weather-resistant construction Pre-drilled mounting holes Suitable for outdoor applications Eco-friendly renewable energy source No external power source required Ideal for educational and DIY projects 📋 Technical Specifications Product Type: Mini Solar Panel Cell Module Cell Type: Polycrystalline Silicon Maximum Power Output: 0.9W Output Voltage: 5V DC Maximum Output Current: 180mA Panel Dimensions: 110 × 69 mm Operating Temperature: -40°C to +85°C Storage Temperature: -40°C to +85°C Construction: Weather-Resistant Connector: None (Solder Wire Connection) Weight: Approximately 15g 🔧 Applications Suitable for: DIY Solar Projects Solar Battery Chargers Mobile Phone Charging Projects Arduino Projects ESP32 & ESP8266 Projects Raspberry Pi Accessories Robotics Projects Solar Garden Lights Educational Science Experiments IoT Devices Portable Electronic Devices Renewable Energy Demonstrations Emergency Backup Power Projects Small DC Loads 📦 Package Includes 1 × 110 × 69mm 5V 180mA Mini Solar Panel Cell Module ⚠️ Note Output voltage and current depend on sunlight intensity and panel orientation. For battery charging applications, use a suitable solar charge controller or charging module. This panel is intended for low-power applications and may not provide sufficient power under low-light conditions. Product appearance may vary slightly depending on the manufacturing batch.
Single Shaft BO Motor 100 RPM
[Gear Motor] 100 RPM Single Shaft BO Motor – Straight Shaft The 100 RPM Single Shaft BO Motor is a lightweight and cost-effective solution designed for DIY robotics, small automation systems, and educational projects. Offering an excellent balance between torque and speed at low operating voltages, this motor is ideal for small to medium-sized robots. With its compact and durable construction, the motor features pre-drilled mounting holes for easy installation and perfectly pairs with 69mm robot wheels, making it an excellent choice for 2WD mobile robot platforms. Its low noise, low power consumption, and reliable torque output make it a favorite among hobbyists, students, and developers. Specifications: Shaft Length: 7mm Shaft Diameter: 5.5mm Motor Size: 55 × 48 × 23mm Voltage Range: 3V – 12V DC No-load Current: 40 – 180mA Speed: 100 RPM @ 6V Torque: 0.35 kg-cm Key Features: Lightweight and compact design Cost-effective with injection-molded housing Resilient, shock-absorbing construction Low power consumption and minimal maintenance Quiet operation with reduced friction Corrosion-resistant for long life Easy mounting with pre-drilled holes Ideal For: DIY robotics and automation projects Line follower and obstacle-avoiding robots Educational robotics kits Small mechanical prototypes Package Includes: 1 × 100 RPM Single Shaft BO Motor (Straight Shaft)
100 RPM Dual Shaft BO Motor-Straight
[Gear Motor] The 100 RPM Dual Shaft BO Motor Plastic Gear Motor – BO series straight motor gives good torque and rpm at lower operating voltages, which is the biggest advantage of these motors. Small shaft with matching wheels gives an optimized design for your application or robot. Mounting holes on the body & light weight makes it suitable for in-circuit placement. This motor can be used with 69mm Diameter Wheel for Plastic Gear Motors and 87mm Diameter Multipurpose Wheel for Plastic Gear Motors. Low-cost geared DC Motor. It is an alternative to our metal gear DC motors. It comes with an operating voltage of 3-12V and is perfect for building small and medium robots. Available with 60 and 150 RPM. The motor is ideal for DIY enthusiasts. This motor set is inexpensive, small, easy to install, and ideally suited for use in a mobile robot car. They are commonly used in our 2WD platforms. We are supplying the range BO(Battery Operated) Motors with varying RPM and Gear-Box arrangement, click on the name below for more information Features : Low density: lightweight, low inertia. Capability to absorb shock and vibration as a result of elastic compliance. Ability to operate with minimum or no lubrication, due to inherent lubricity. The relatively low coefficient of friction. Operating Voltage(VDC): 3~12 Shaft Length (mm): 8.5 Shaft Diameter (mm): 5.5 (Double D-type) No Load Current: 40-180mA. Rated Speed(After Reduction): 100 RPM Rated Torque: 0.35 Kg cm Cost-effectiveness of the injection-molding process. Elimination of machining operations. Low density: lightweight, low inertia. Uniformity of parts. Capability to absorb shock and vibration as a result of elastic compliance. Ability to operate with minimum or no lubrication, due to inherent lubricity. The relatively low coefficient of friction. Corrosion-resistance; elimination of plating, or protective coatings. The quietness of operation. Tolerances often less critical than for metal gears, due in part to their greater resilience. Consistency with the trend to greater use of plastic housings and other components. SPECIFICATIONS : Operating Voltage (VDC) 3 ~ 12 Shaft Length (mm) 8.5 Shaft Diameter (mm) (Double D-type) 5.5 No Load Current (mA) 40-180mA. Rated Speed After Reduction (RPM) 100 Rated Torque (Kg-Cm) 0.35 Weight (gm) 30 Dimensions in mm (LxWxH) 70 x 23 x 19 Gearbox Shape Straight Shipment Weight 0.033 kg Shipment Dimensions 8 × 4 × 4 cm Package Includes : 1 x 100 RPM Dual Shaft BO Motor – Straight