Sound Playback Module
- •Voice board, recording, recorder, playback, mic, sound, audio loudspeaker.
Description
Voice board, recording, recorder, playback, mic, sound, audio loudspeaker.
🔹 Key Features
- •Voice board, recording, recorder, playback, mic, sound, audio loudspeaker.
🔹 Pin Configuration & Wiring
🔹 Applications
This component is engineered and suitable for:
- •Microcontroller interfacing (Arduino, ESP32, Raspberry Pi, STM32)
- •IoT telemetry, environmental monitoring, and smart home systems
- •Robotics navigation, obstacle detection, and motion sensing
- •STEM education, university electronics labs, and maker prototyping
🔹 Package Includes
- ✓1 × Sound Playback Module
Wholesale Tiered Pricing
Related products
Complementary hardware and compatible components for your project
8×8 LED Matrix Module (MAX7219)
MAX7219 dot LED matrix module, MCU controlled display.
7-Segment LED Display (4-digit)
LED 4-digit display module with clock point, 4-pin Dupont line for Arduino.
Only 2 leftGSM SIM800L
GPRS transfer board, micro SIM, GSM core, TTL port for Arduino.
Laser Diode Module (650nm 5mW)
650nm 6mm 5V DC 5mW mini laser dot diode module.
Out of stock0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306
[LED/LCD Display] 0.96 Inch Blue SPI OLED Display Module 7-Pin 128×64 – SSD1306 The 0.96-inch Blue OLED Display Module is a compact graphical display based on the SSD1306 driver IC, featuring a 128×64 pixel resolution and blue monochrome display. This version has a 7-pin interface with a dedicated CS (Chip Select) pin, making it suitable for 4-wire SPI communication. The module is factory-configured for SPI and can also be modified for I2C/IIC communication on compatible board versions. With its compact size, wide viewing angle and low-power OLED technology, it is suitable for Arduino, ESP32, ESP8266, STM32, Raspberry Pi and other microcontroller projects. ⭐ Key Features 0.96-inch blue OLED display 128 × 64 pixel resolution SSD1306 driver IC 7-pin interface Dedicated CS (Chip Select) pin Factory configured for 4-wire SPI Supports SPI and I2C/IIC with appropriate configuration 3.3V/5V compatible on supported module versions No backlight required Low power consumption Wide viewing angle of more than 160° Compact PCB design Pre-soldered 7-pin male header Compatible with Arduino, ESP32, ESP8266, STM32 and Raspberry Pi projects 📋 Technical Specifications Display Type: OLED (Organic Light-Emitting Diode) Display Colour: Blue Display Size: 0.96 inch Driver IC: SSD1306 Resolution: 128 × 64 pixels Interface: SPI / I2C Default Interface: 4-wire SPI Input Voltage: 3.3V–5V Viewing Angle: >160° Module Dimensions: Approximately 27 × 27 × 4mm Operating Temperature: Approximately -30°C to +70°C Header: 7-pin male header, pre-soldered Display Type: Monochrome blue OLED 🔌 7-Pin Interface The 7-pin version provides the following connections: GND – Ground VCC – Power supply D0 / SCK / CLK – SPI clock D1 / MOSI / SDA – SPI data RES / RST – Display reset DC / A0 – Data/Command selection CS – Chip Select 🛠️ SPI Connection The module is normally supplied in 4-wire SPI configuration. For an Arduino Uno, a typical connection is: VCC → 5V GND → GND D0 → SCK / D13 D1 → MOSI / D11 RES → Digital I/O DC → Digital I/O CS → Digital I/O The dedicated CS pin allows the OLED to share the SPI bus with other devices such as SD cards or additional SPI peripherals. 🔄 I2C / IIC Configuration On compatible versions, the module can be converted from SPI to I2C by changing the appropriate resistor configuration on the PCB. The supplied board configuration may require: Moving the resistor from R3 to R1 Shorting R8 with solder Using D0 as SCL Using D1 as SDA Configuring DC for the I2C address The exact resistor positions can vary between board revisions, so check the markings on your particular PCB before modification. 🎯 Applications Arduino projects ESP32 projects ESP8266 projects STM32 development Raspberry Pi projects IoT devices Sensor displays Voltage/current meters Battery monitors Temperature displays Digital clocks Data loggers Portable electronic devices Robotics DIY measuring instruments Embedded systems Menu and status displays 💡 Advantages of OLED OLED technology is self-emissive, meaning the pixels produce their own light and do not require a conventional backlight. This provides high contrast, compact construction and a wide viewing angle while keeping power consumption relatively low. ⚠️ Important Notes This is the 7-pin SPI version, not the 6-pin version. The module is normally configured for SPI communication. Check the PCB labels before connecting the module. Do not exceed the specified supply voltage. Although many versions support 5V operation, the exact voltage tolerance can vary between board revisions. I2C operation may require hardware resistor modification. The actual PCB layout and component markings may vary slightly between production batches. Display colour: Blue. Libraries such as Adafruit SSD1306 and U8g2 can be used with compatible microcontrollers. 📦 Package Includes 1 × 0.96 Inch Blue SPI OLED Display Module
48mm Square Internal Magnet Speaker – 4Ohms 5W
[Speakers] 48mm Square Internal Magnet Speaker – 4Ω 5W The 48mm Square Internal Magnet Speaker is a compact full-range audio driver designed for clear and efficient sound reproduction in space-constrained applications. With a 4Ω impedance and 5W power rating, this speaker is suitable for Bluetooth speakers, portable audio systems, DIY speaker projects and embedded electronic devices. Its square frame allows convenient mounting inside compact enclosures and panels. ⭐ Key Features Compact square speaker design 4Ω impedance 5W power rating Internal magnet construction Full-range audio output Compact size for space-limited applications Easy to install inside speaker enclosures Suitable for DIY and commercial audio projects Lightweight and practical design 📋 Technical Specifications Speaker Type: Internal Magnet Speaker Shape: Square Speaker Size: 48mm class Model: 4Ω 5W Impedance: 4Ω Power Rating: 5W Magnet Type: Internal Magnet Audio Type: Full-range Mounting Type: Panel / Enclosure Mount Dimensions: 47 × 29 × 23mm Application: Compact audio systems, DIY electronics and portable speakers 🔧 Applications Bluetooth speaker systems Portable speakers DIY speaker projects Compact audio enclosures Embedded audio systems Intercom systems Alert and notification devices Educational electronics projects Consumer electronic devices Custom audio projects 🛠️ Installation Connect the speaker to a compatible amplifier with a 4Ω output. Ensure the amplifier's output power is suitable for the speaker's 5W rating. Mount the speaker securely inside the enclosure to reduce unwanted vibration. Observe correct speaker polarity when connecting multiple speakers. 📦 Package Includes 1 × 48mm Square Internal Magnet Speaker Impedance: 4Ω Power: 5W ⚠️ Precautions Do not exceed the 5W rated power for prolonged operation. Use a compatible 4Ω amplifier. Avoid short-circuiting the speaker terminals. Keep away from moisture, excessive heat and physical damage. Ensure proper mounting to minimize vibration and unwanted noise. Actual sound quality depends on the amplifier, enclosure and application.