guides
The Ultimate 3D Printing Calibration Guide: Bed Leveling, E-Steps & First Layer Adhesion
Eliminate stringing, warped corners, and layer shifts forever: a comprehensive troubleshooting manual for Bambu Lab, Creality, and Prusa FDM 3D printers.
Kunal (Founder & Owner) 1 min read4 Oct 2026
The Ultimate 3D Printing Calibration Guide: Bed Leveling, E-Steps & First Layer Adhesion
90% of failed FDM prints can be traced back to incorrect first-layer squish, uncalibrated extruder rotation distance (E-steps), or improper bed surface hygiene. This master checklist ensures flawless print adhesion across PLA, PETG, ABS, and TPU.
1. The Bed Tramming (Leveling) Protocol
- Clean your PEI build plate with isopropyl alcohol (IPA 99%) or warm water and dish soap. Never touch the print surface with bare fingers!
- Heat the bed to working temperature (60°C for PLA) before leveling to account for thermal expansion of the aluminum heat bed.
- Adjust bed screws with a standard 0.10mm receipt paper until slight friction is felt under all four corners.
Parts used in this tutorial
Buy them in one click — ships from Pune across India.
- 3D Printer3D Printing₹12,000.00+ GST
- Filament for 3D Printer (Multicolor pack)3D Printing₹250.00+ GST
- 3D Pen Kit3D Printing₹1,500.00+ GST
Approx. total ₹13,750.00 (before GST)Add all to cart
#3d-printing#bambu#maker#calibration
Found this useful? Tell us what you'd like to read next via our RFQ form.